From mboxrd@z Thu Jan 1 00:00:00 1970 From: Frank Meinl Subject: [PATCH v3] libmultipath: Allow discovery of USB devices Date: Mon, 28 Sep 2020 21:09:57 +0200 Message-ID: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: dm-devel-bounces@redhat.com Errors-To: dm-devel-bounces@redhat.com To: dm-devel@redhat.com Cc: Frank Meinl , mwilck@suse.com List-Id: dm-devel.ids This change adds a new configuration option allow_usb_devices. It is disabled by default, so that the behavior of existing setups is not changed. If enabled (via multipath.conf), USB devices will be found during device discovery and can be used for multipath setups. Without this option, multipath currently ignores all USB drives, which is convenient for most users. (refer also to commit 51957eb) However, it can be beneficial to use the multipath dm-module even if there is only a single path to an USB attached storage. In combination with the option 'queue_if_no_path', such a setup survives a temporary device disconnect without any severe consequences for the running applications. All I/O is queued until the device reappears. Signed-off-by: Frank Meinl --- libmultipath/config.h | 1 + libmultipath/dict.c | 4 ++++ libmultipath/discovery.c | 13 ++++++++++--- libmultipath/print.c | 2 ++ libmultipath/structs.h | 1 + multipath/multipath.conf.5 | 12 ++++++++++++ 6 files changed, 30 insertions(+), 3 deletions(-) diff --git a/libmultipath/config.h b/libmultipath/config.h index 2bb7153b..290aea58 100644 --- a/libmultipath/config.h +++ b/libmultipath/config.h @@ -158,6 +158,7 @@ struct config { unsigned int dev_loss; int log_checker_err; int allow_queueing; + int allow_usb_devices; int find_multipaths; uid_t uid; gid_t gid; diff --git a/libmultipath/dict.c b/libmultipath/dict.c index feabae56..f12c2e5c 100644 --- a/libmultipath/dict.c +++ b/libmultipath/dict.c @@ -543,6 +543,9 @@ snprint_def_queue_without_daemon (struct config *conf, declare_def_handler(checker_timeout, set_int) declare_def_snprint(checker_timeout, print_nonzero) +declare_def_handler(allow_usb_devices, set_yes_no) +declare_def_snprint(allow_usb_devices, print_yes_no) + declare_def_handler(flush_on_last_del, set_yes_no_undef) declare_def_snprint_defint(flush_on_last_del, print_yes_no_undef, DEFAULT_FLUSH) declare_ovr_handler(flush_on_last_del, set_yes_no_undef) @@ -1759,6 +1762,7 @@ init_keywords(vector keywords) install_keyword("no_path_retry", &def_no_path_retry_handler, &snprint_def_no_path_retry); install_keyword("queue_without_daemon", &def_queue_without_daemon_handler, &snprint_def_queue_without_daemon); install_keyword("checker_timeout", &def_checker_timeout_handler, &snprint_def_checker_timeout); + install_keyword("allow_usb_devices", &def_allow_usb_devices_handler, &snprint_def_allow_usb_devices); install_keyword("pg_timeout", &deprecated_handler, &snprint_deprecated); install_keyword("flush_on_last_del", &def_flush_on_last_del_handler, &snprint_def_flush_on_last_del); install_keyword("user_friendly_names", &def_user_friendly_names_handler, &snprint_def_user_friendly_names); diff --git a/libmultipath/discovery.c b/libmultipath/discovery.c index 2f301ac4..193d7127 100644 --- a/libmultipath/discovery.c +++ b/libmultipath/discovery.c @@ -375,11 +375,10 @@ sysfs_get_tgt_nodename(struct path *pp, char *node) while (tgtdev) { value = udev_device_get_subsystem(tgtdev); if (value && !strcmp(value, "usb")) { - pp->sg_id.proto_id = SCSI_PROTOCOL_UNSPEC; + pp->sg_id.proto_id = SCSI_PROTOCOL_USB; tgtname = udev_device_get_sysname(tgtdev); strlcpy(node, tgtname, NODE_NAME_SIZE); - condlog(3, "%s: skip USB device %s", pp->dev, node); - return 1; + return 0; } tgtdev = udev_device_get_parent(tgtdev); } @@ -2136,6 +2135,14 @@ int pathinfo(struct path *pp, struct config *conf, int mask) if (rc != PATHINFO_OK) return rc; + + if (pp->bus == SYSFS_BUS_SCSI && + pp->sg_id.proto_id == SCSI_PROTOCOL_USB && + !conf->allow_usb_devices) { + condlog(3, "%s: skip USB device %s", pp->dev, + pp->tgt_node_name); + return PATHINFO_SKIPPED; + } } if (mask & DI_BLACKLIST && mask & DI_SYSFS) { diff --git a/libmultipath/print.c b/libmultipath/print.c index ea95d696..19de2c7c 100644 --- a/libmultipath/print.c +++ b/libmultipath/print.c @@ -684,6 +684,8 @@ snprint_path_protocol(char * buff, size_t len, const struct path * pp) return snprintf(buff, len, "scsi:adt"); case SCSI_PROTOCOL_ATA: return snprintf(buff, len, "scsi:ata"); + case SCSI_PROTOCOL_USB: + return snprintf(buff, len, "scsi:usb"); case SCSI_PROTOCOL_UNSPEC: default: return snprintf(buff, len, "scsi:unspec"); diff --git a/libmultipath/structs.h b/libmultipath/structs.h index 4afd3e88..7de93d6c 100644 --- a/libmultipath/structs.h +++ b/libmultipath/structs.h @@ -174,6 +174,7 @@ enum scsi_protocol { SCSI_PROTOCOL_SAS = 6, SCSI_PROTOCOL_ADT = 7, /* Media Changers */ SCSI_PROTOCOL_ATA = 8, + SCSI_PROTOCOL_USB = 9, /* USB Attached SCSI (UAS), and others */ SCSI_PROTOCOL_UNSPEC = 0xf, /* No specific protocol */ }; diff --git a/multipath/multipath.conf.5 b/multipath/multipath.conf.5 index 5adaced6..60fa12a2 100644 --- a/multipath/multipath.conf.5 +++ b/multipath/multipath.conf.5 @@ -643,6 +643,18 @@ The default is: in \fB/sys/block/sd/device/timeout\fR . . .TP +.B allow_usb_devices +If set to +.I no +, all USB devices will be skipped during path discovery. If you intend to use +multipath on USB attached devices, set this to \fIyes\fR. +.RS +.TP +The default is: \fBno\fR +.RE +. +. +.TP .B flush_on_last_del If set to .I yes -- 2.25.1