From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
To: Geert Uytterhoeven <geert+renesas@glider.be>,
Vinod Koul <vkoul@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
Bartosz Golaszewski <bgolaszewski@baylibre.com>,
Joerg Roedel <joro@8bytes.org>,
Sergei Shtylyov <sergei.shtylyov@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>
Cc: Magnus Damm <magnus.damm@gmail.com>,
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>,
dmaengine@vger.kernel.org, devicetree@vger.kernel.org,
linux-gpio@vger.kernel.org, iommu@lists.linux-foundation.org,
netdev@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
linux-kernel@vger.kernel.org,
Prabhakar <prabhakar.csengg@gmail.com>
Subject: [PATCH 7/9] arm64: dts: renesas: r8a774e1: Add GPIO device nodes
Date: Mon, 13 Jul 2020 22:35:18 +0100 [thread overview]
Message-ID: <1594676120-5862-8-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com> (raw)
In-Reply-To: <1594676120-5862-1-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com>
From: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Add GPIO device nodes to the DT of the r8a774e1 SoC.
Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
arch/arm64/boot/dts/renesas/r8a774e1.dtsi | 73 +++++++++++++++++------
1 file changed, 56 insertions(+), 17 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
index 9e05d134a295..599703d87b56 100644
--- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
@@ -246,84 +246,123 @@
};
gpio0: gpio@e6050000 {
+ compatible = "renesas,gpio-r8a774e1",
+ "renesas,rcar-gen3-gpio";
reg = <0 0xe6050000 0 0x50>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
+ gpio-ranges = <&pfc 0 0 16>;
#interrupt-cells = <2>;
interrupt-controller;
-
- /* placeholder */
+ clocks = <&cpg CPG_MOD 912>;
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 912>;
};
gpio1: gpio@e6051000 {
+ compatible = "renesas,gpio-r8a774e1",
+ "renesas,rcar-gen3-gpio";
reg = <0 0xe6051000 0 0x50>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
+ gpio-ranges = <&pfc 0 32 29>;
#interrupt-cells = <2>;
interrupt-controller;
-
- /* placeholder */
+ clocks = <&cpg CPG_MOD 911>;
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 911>;
};
gpio2: gpio@e6052000 {
+ compatible = "renesas,gpio-r8a774e1",
+ "renesas,rcar-gen3-gpio";
reg = <0 0xe6052000 0 0x50>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
+ gpio-ranges = <&pfc 0 64 15>;
#interrupt-cells = <2>;
interrupt-controller;
-
- /* placeholder */
+ clocks = <&cpg CPG_MOD 910>;
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 910>;
};
gpio3: gpio@e6053000 {
- /* placeholder */
+ compatible = "renesas,gpio-r8a774e1",
+ "renesas,rcar-gen3-gpio";
reg = <0 0xe6053000 0 0x50>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
+ gpio-ranges = <&pfc 0 96 16>;
#interrupt-cells = <2>;
interrupt-controller;
-
- /* placeholder */
+ clocks = <&cpg CPG_MOD 909>;
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 909>;
};
gpio4: gpio@e6054000 {
+ compatible = "renesas,gpio-r8a774e1",
+ "renesas,rcar-gen3-gpio";
reg = <0 0xe6054000 0 0x50>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
+ gpio-ranges = <&pfc 0 128 18>;
#interrupt-cells = <2>;
interrupt-controller;
-
- /* placeholder */
+ clocks = <&cpg CPG_MOD 908>;
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 908>;
};
gpio5: gpio@e6055000 {
+ compatible = "renesas,gpio-r8a774e1",
+ "renesas,rcar-gen3-gpio";
reg = <0 0xe6055000 0 0x50>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
+ gpio-ranges = <&pfc 0 160 26>;
#interrupt-cells = <2>;
interrupt-controller;
-
- /* placeholder */
+ clocks = <&cpg CPG_MOD 907>;
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 907>;
};
gpio6: gpio@e6055400 {
+ compatible = "renesas,gpio-r8a774e1",
+ "renesas,rcar-gen3-gpio";
reg = <0 0xe6055400 0 0x50>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
+ gpio-ranges = <&pfc 0 192 32>;
#interrupt-cells = <2>;
interrupt-controller;
-
- /* placeholder */
+ clocks = <&cpg CPG_MOD 906>;
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 906>;
};
gpio7: gpio@e6055800 {
+ compatible = "renesas,gpio-r8a774e1",
+ "renesas,rcar-gen3-gpio";
reg = <0 0xe6055800 0 0x50>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
+ gpio-ranges = <&pfc 0 224 4>;
#interrupt-cells = <2>;
interrupt-controller;
-
- /* placeholder */
+ clocks = <&cpg CPG_MOD 905>;
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 905>;
};
pfc: pin-controller@e6060000 {
--
2.17.1
next prev parent reply other threads:[~2020-07-13 21:36 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-13 21:35 [PATCH 0/9] R8A774E1 SoC enable support for IPMMU, DMAC, GPIO and AVB Lad Prabhakar
2020-07-13 21:35 ` [PATCH 1/9] dt-bindings: iommu: renesas,ipmmu-vmsa: Add r8a774e1 support Lad Prabhakar
2020-07-14 7:35 ` Geert Uytterhoeven
2020-07-21 2:02 ` Rob Herring
2020-07-13 21:35 ` [PATCH 2/9] iommu/ipmmu-vmsa: Hook up R8A774E1 DT matching code Lad Prabhakar
2020-07-14 8:09 ` Geert Uytterhoeven
2020-07-14 8:30 ` Lad, Prabhakar
2020-07-14 8:41 ` Geert Uytterhoeven
2020-07-14 11:42 ` Yoshihiro Shimoda
2020-07-14 12:39 ` Geert Uytterhoeven
2020-07-16 4:42 ` Yoshihiro Shimoda
2020-07-13 21:35 ` [PATCH 3/9] arm64: dts: renesas: r8a774e1: Add IPMMU device nodes Lad Prabhakar
2020-07-15 10:18 ` Geert Uytterhoeven
2020-07-21 2:01 ` Rob Herring
2020-07-13 21:35 ` [PATCH 4/9] dt-bindings: dma: renesas,rcar-dmac: Document R8A774E1 bindings Lad Prabhakar
2020-07-14 7:39 ` Geert Uytterhoeven
2020-07-15 10:40 ` Vinod Koul
2020-07-13 21:35 ` [PATCH 5/9] arm64: dts: renesas: r8a774e1: Add SYS-DMAC device nodes Lad Prabhakar
2020-07-15 10:20 ` Geert Uytterhoeven
2020-07-13 21:35 ` [PATCH 6/9] dt-bindings: gpio: renesas,rcar-gpio: Add r8a774e1 support Lad Prabhakar
2020-07-14 8:00 ` Geert Uytterhoeven
2020-07-21 2:02 ` Rob Herring
2020-08-27 16:39 ` Lad, Prabhakar
2020-08-27 19:30 ` Bartosz Golaszewski
2020-07-13 21:35 ` Lad Prabhakar [this message]
2020-07-15 10:21 ` [PATCH 7/9] arm64: dts: renesas: r8a774e1: Add GPIO device nodes Geert Uytterhoeven
2020-07-13 21:35 ` [PATCH 8/9] dt-bindings: net: renesas,ravb: Add support for r8a774e1 SoC Lad Prabhakar
2020-07-14 7:34 ` Sergei Shtylyov
2020-07-14 8:01 ` Geert Uytterhoeven
2020-07-21 2:03 ` Rob Herring
2020-08-27 10:28 ` Lad, Prabhakar
2020-09-19 11:10 ` Lad, Prabhakar
2020-07-13 21:35 ` [PATCH 9/9] arm64: dts: renesas: r8a774e1: Add Ethernet AVB node Lad Prabhakar
2020-07-15 10:21 ` Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1594676120-5862-8-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com \
--to=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=bgolaszewski@baylibre.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=iommu@lists.linux-foundation.org \
--cc=joro@8bytes.org \
--cc=kuba@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=prabhakar.csengg@gmail.com \
--cc=robh+dt@kernel.org \
--cc=sergei.shtylyov@gmail.com \
--cc=vkoul@kernel.org \
--cc=yoshihiro.shimoda.uh@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).