dmaengine Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v2] dmaengine: idxd: reset states after device disable or reset
@ 2020-07-27 16:37 Dave Jiang
  0 siblings, 0 replies; only message in thread
From: Dave Jiang @ 2020-07-27 16:37 UTC (permalink / raw)
  To: vkoul; +Cc: Mona Hossain, dmaengine

The state for WQs should be reset to disabled when a device is reset or
disabled.

Fixes: da32b28c95a7 ("dmaengine: idxd: cleanup workqueue config after disabling")
Reported-by: Mona Hossain <mona.hossain@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
---

v2:
- Combine code to helper routine (Vinod)

 drivers/dma/idxd/device.c |   26 ++++++++++++++++++++++++++
 drivers/dma/idxd/irq.c    |   12 ------------
 2 files changed, 26 insertions(+), 12 deletions(-)

diff --git a/drivers/dma/idxd/device.c b/drivers/dma/idxd/device.c
index 14b45853aa5f..b75d699160bf 100644
--- a/drivers/dma/idxd/device.c
+++ b/drivers/dma/idxd/device.c
@@ -410,10 +410,27 @@ int idxd_device_enable(struct idxd_device *idxd)
 	return 0;
 }
 
+void idxd_device_wqs_clear_state(struct idxd_device *idxd)
+{
+	int i;
+
+	lockdep_assert_held(&idxd->dev_lock);
+
+	for (i = 0; i < idxd->max_wqs; i++) {
+		struct idxd_wq *wq = &idxd->wqs[i];
+
+		if (wq->state == IDXD_WQ_ENABLED) {
+			idxd_wq_disable_cleanup(wq);
+			wq->state = IDXD_WQ_DISABLED;
+		}
+	}
+}
+
 int idxd_device_disable(struct idxd_device *idxd)
 {
 	struct device *dev = &idxd->pdev->dev;
 	u32 status;
+	unsigned long flags;
 
 	if (!idxd_is_enabled(idxd)) {
 		dev_dbg(dev, "Device is not enabled\n");
@@ -429,13 +446,22 @@ int idxd_device_disable(struct idxd_device *idxd)
 		return -ENXIO;
 	}
 
+	spin_lock_irqsave(&idxd->dev_lock, flags);
+	idxd_device_wqs_clear_state(idxd);
 	idxd->state = IDXD_DEV_CONF_READY;
+	spin_unlock_irqrestore(&idxd->dev_lock, flags);
 	return 0;
 }
 
 void idxd_device_reset(struct idxd_device *idxd)
 {
+	unsigned long flags;
+
 	idxd_cmd_exec(idxd, IDXD_CMD_RESET_DEVICE, 0, NULL);
+	spin_lock_irqsave(&idxd->dev_lock, flags);
+	idxd_device_wqs_clear_state(idxd);
+	idxd->state = IDXD_DEV_CONF_READY;
+	spin_unlock_irqrestore(&idxd->dev_lock, flags);
 }
 
 /* Device configuration bits */
diff --git a/drivers/dma/idxd/irq.c b/drivers/dma/idxd/irq.c
index b5142556cc4e..1e9e6991f543 100644
--- a/drivers/dma/idxd/irq.c
+++ b/drivers/dma/idxd/irq.c
@@ -11,18 +11,6 @@
 #include "idxd.h"
 #include "registers.h"
 
-void idxd_device_wqs_clear_state(struct idxd_device *idxd)
-{
-	int i;
-
-	lockdep_assert_held(&idxd->dev_lock);
-	for (i = 0; i < idxd->max_wqs; i++) {
-		struct idxd_wq *wq = &idxd->wqs[i];
-
-		wq->state = IDXD_WQ_DISABLED;
-	}
-}
-
 static void idxd_device_reinit(struct work_struct *work)
 {
 	struct idxd_device *idxd = container_of(work, struct idxd_device, work);


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-27 16:37 [PATCH v2] dmaengine: idxd: reset states after device disable or reset Dave Jiang

dmaengine Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/dmaengine/0 dmaengine/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dmaengine dmaengine/ https://lore.kernel.org/dmaengine \
		dmaengine@vger.kernel.org
	public-inbox-index dmaengine

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.dmaengine


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git