dmaengine.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dave Jiang <dave.jiang@intel.com>
To: vkoul@kernel.org
Cc: Dan Williams <dan.j.williams@intel.com>, dmaengine@vger.kernel.org
Subject: [PATCH v2 05/18] dmaengine: idxd: move wq_enable() to device.c
Date: Wed, 14 Jul 2021 16:20:50 -0700	[thread overview]
Message-ID: <162630485068.631529.4798937944461278800.stgit@djiang5-desk3.ch.intel.com> (raw)
In-Reply-To: <162630468448.631529.1963704964865951650.stgit@djiang5-desk3.ch.intel.com>

Move the wq_enable() function to device.c in preparation of setting up the
idxd internal sub-driver framework. No logic changes.

Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
---
 drivers/dma/idxd/device.c |  124 +++++++++++++++++++++++++++++++++++++++++++++
 drivers/dma/idxd/idxd.h   |    1 
 drivers/dma/idxd/sysfs.c  |  124 ---------------------------------------------
 3 files changed, 126 insertions(+), 123 deletions(-)

diff --git a/drivers/dma/idxd/device.c b/drivers/dma/idxd/device.c
index 4a2af9799239..b1c509bcfa31 100644
--- a/drivers/dma/idxd/device.c
+++ b/drivers/dma/idxd/device.c
@@ -1129,3 +1129,127 @@ int idxd_device_load_config(struct idxd_device *idxd)
 
 	return 0;
 }
+
+static int __drv_enable_wq(struct idxd_wq *wq)
+{
+	struct idxd_device *idxd = wq->idxd;
+	struct device *dev = &idxd->pdev->dev;
+	unsigned long flags;
+	int rc = -ENXIO;
+
+	lockdep_assert_held(&wq->wq_lock);
+
+	if (idxd->state != IDXD_DEV_ENABLED)
+		goto err;
+
+	if (wq->state != IDXD_WQ_DISABLED) {
+		dev_dbg(dev, "wq %d already enabled.\n", wq->id);
+		rc = -EBUSY;
+		goto err;
+	}
+
+	if (!wq->group) {
+		dev_dbg(dev, "wq %d not attached to group.\n", wq->id);
+		goto err;
+	}
+
+	if (strlen(wq->name) == 0) {
+		dev_dbg(dev, "wq %d name not set.\n", wq->id);
+		goto err;
+	}
+
+	/* Shared WQ checks */
+	if (wq_shared(wq)) {
+		if (!device_swq_supported(idxd)) {
+			dev_dbg(dev, "PASID not enabled and shared wq.\n");
+			goto err;
+		}
+		/*
+		 * Shared wq with the threshold set to 0 means the user
+		 * did not set the threshold or transitioned from a
+		 * dedicated wq but did not set threshold. A value
+		 * of 0 would effectively disable the shared wq. The
+		 * driver does not allow a value of 0 to be set for
+		 * threshold via sysfs.
+		 */
+		if (wq->threshold == 0) {
+			dev_dbg(dev, "Shared wq and threshold 0.\n");
+			goto err;
+		}
+	}
+
+	rc = idxd_wq_alloc_resources(wq);
+	if (rc < 0) {
+		dev_dbg(dev, "wq resource alloc failed\n");
+		goto err;
+	}
+
+	spin_lock_irqsave(&idxd->dev_lock, flags);
+	if (test_bit(IDXD_FLAG_CONFIGURABLE, &idxd->flags))
+		rc = idxd_device_config(idxd);
+	spin_unlock_irqrestore(&idxd->dev_lock, flags);
+	if (rc < 0) {
+		dev_dbg(dev, "Writing wq %d config failed: %d\n", wq->id, rc);
+		goto err;
+	}
+
+	rc = idxd_wq_enable(wq);
+	if (rc < 0) {
+		dev_dbg(dev, "wq %d enabling failed: %d\n", wq->id, rc);
+		goto err;
+	}
+
+	rc = idxd_wq_map_portal(wq);
+	if (rc < 0) {
+		dev_dbg(dev, "wq %d portal mapping failed: %d\n", wq->id, rc);
+		goto err_map_portal;
+	}
+
+	wq->client_count = 0;
+
+	if (wq->type == IDXD_WQT_KERNEL) {
+		rc = idxd_wq_init_percpu_ref(wq);
+		if (rc < 0) {
+			dev_dbg(dev, "wq %d percpu_ref setup failed\n", wq->id);
+			goto err_cpu_ref;
+		}
+	}
+
+	if (is_idxd_wq_dmaengine(wq)) {
+		rc = idxd_register_dma_channel(wq);
+		if (rc < 0) {
+			dev_dbg(dev, "wq %d DMA channel register failed\n", wq->id);
+			goto err_client;
+		}
+	} else if (is_idxd_wq_cdev(wq)) {
+		rc = idxd_wq_add_cdev(wq);
+		if (rc < 0) {
+			dev_dbg(dev, "wq %d cdev creation failed\n", wq->id);
+			goto err_client;
+		}
+	}
+
+	dev_info(dev, "wq %s enabled\n", dev_name(wq_confdev(wq)));
+	return 0;
+
+err_client:
+	idxd_wq_quiesce(wq);
+err_cpu_ref:
+	idxd_wq_unmap_portal(wq);
+err_map_portal:
+	rc = idxd_wq_disable(wq, false);
+	if (rc < 0)
+		dev_dbg(dev, "wq %s disable failed\n", dev_name(wq_confdev(wq)));
+err:
+	return rc;
+}
+
+int drv_enable_wq(struct idxd_wq *wq)
+{
+	int rc;
+
+	mutex_lock(&wq->wq_lock);
+	rc = __drv_enable_wq(wq);
+	mutex_unlock(&wq->wq_lock);
+	return rc;
+}
diff --git a/drivers/dma/idxd/idxd.h b/drivers/dma/idxd/idxd.h
index e58787a62421..e2773eb9d02c 100644
--- a/drivers/dma/idxd/idxd.h
+++ b/drivers/dma/idxd/idxd.h
@@ -487,6 +487,7 @@ void idxd_mask_msix_vector(struct idxd_device *idxd, int vec_id);
 void idxd_unmask_msix_vector(struct idxd_device *idxd, int vec_id);
 
 /* device control */
+int drv_enable_wq(struct idxd_wq *wq);
 int idxd_device_init_reset(struct idxd_device *idxd);
 int idxd_device_enable(struct idxd_device *idxd);
 int idxd_device_disable(struct idxd_device *idxd);
diff --git a/drivers/dma/idxd/sysfs.c b/drivers/dma/idxd/sysfs.c
index 56f13a71c1cb..4e492d31e094 100644
--- a/drivers/dma/idxd/sysfs.c
+++ b/drivers/dma/idxd/sysfs.c
@@ -39,128 +39,6 @@ static int idxd_config_bus_match(struct device *dev,
 	return matched;
 }
 
-static int enable_wq(struct idxd_wq *wq)
-{
-	struct idxd_device *idxd = wq->idxd;
-	struct device *dev = &idxd->pdev->dev;
-	unsigned long flags;
-	int rc;
-
-	mutex_lock(&wq->wq_lock);
-
-	if (idxd->state != IDXD_DEV_ENABLED) {
-		mutex_unlock(&wq->wq_lock);
-		dev_warn(dev, "Enabling while device not enabled.\n");
-		return -EPERM;
-	}
-
-	if (wq->state != IDXD_WQ_DISABLED) {
-		mutex_unlock(&wq->wq_lock);
-		dev_warn(dev, "WQ %d already enabled.\n", wq->id);
-		return -EBUSY;
-	}
-
-	if (!wq->group) {
-		mutex_unlock(&wq->wq_lock);
-		dev_warn(dev, "WQ not attached to group.\n");
-		return -EINVAL;
-	}
-
-	if (strlen(wq->name) == 0) {
-		mutex_unlock(&wq->wq_lock);
-		dev_warn(dev, "WQ name not set.\n");
-		return -EINVAL;
-	}
-
-	/* Shared WQ checks */
-	if (wq_shared(wq)) {
-		if (!device_swq_supported(idxd)) {
-			dev_warn(dev, "PASID not enabled and shared WQ.\n");
-			mutex_unlock(&wq->wq_lock);
-			return -ENXIO;
-		}
-		/*
-		 * Shared wq with the threshold set to 0 means the user
-		 * did not set the threshold or transitioned from a
-		 * dedicated wq but did not set threshold. A value
-		 * of 0 would effectively disable the shared wq. The
-		 * driver does not allow a value of 0 to be set for
-		 * threshold via sysfs.
-		 */
-		if (wq->threshold == 0) {
-			dev_warn(dev, "Shared WQ and threshold 0.\n");
-			mutex_unlock(&wq->wq_lock);
-			return -EINVAL;
-		}
-	}
-
-	rc = idxd_wq_alloc_resources(wq);
-	if (rc < 0) {
-		mutex_unlock(&wq->wq_lock);
-		dev_warn(dev, "WQ resource alloc failed\n");
-		return rc;
-	}
-
-	spin_lock_irqsave(&idxd->dev_lock, flags);
-	if (test_bit(IDXD_FLAG_CONFIGURABLE, &idxd->flags))
-		rc = idxd_device_config(idxd);
-	spin_unlock_irqrestore(&idxd->dev_lock, flags);
-	if (rc < 0) {
-		mutex_unlock(&wq->wq_lock);
-		dev_warn(dev, "Writing WQ %d config failed: %d\n", wq->id, rc);
-		return rc;
-	}
-
-	rc = idxd_wq_enable(wq);
-	if (rc < 0) {
-		mutex_unlock(&wq->wq_lock);
-		dev_warn(dev, "WQ %d enabling failed: %d\n", wq->id, rc);
-		return rc;
-	}
-
-	rc = idxd_wq_map_portal(wq);
-	if (rc < 0) {
-		dev_warn(dev, "wq portal mapping failed: %d\n", rc);
-		rc = idxd_wq_disable(wq, false);
-		if (rc < 0)
-			dev_warn(dev, "IDXD wq disable failed\n");
-		mutex_unlock(&wq->wq_lock);
-		return rc;
-	}
-
-	wq->client_count = 0;
-
-	if (wq->type == IDXD_WQT_KERNEL) {
-		rc = idxd_wq_init_percpu_ref(wq);
-		if (rc < 0) {
-			dev_dbg(dev, "percpu_ref setup failed\n");
-			mutex_unlock(&wq->wq_lock);
-			return rc;
-		}
-	}
-
-	if (is_idxd_wq_dmaengine(wq)) {
-		rc = idxd_register_dma_channel(wq);
-		if (rc < 0) {
-			dev_dbg(dev, "DMA channel register failed\n");
-			mutex_unlock(&wq->wq_lock);
-			return rc;
-		}
-	} else if (is_idxd_wq_cdev(wq)) {
-		rc = idxd_wq_add_cdev(wq);
-		if (rc < 0) {
-			dev_dbg(dev, "Cdev creation failed\n");
-			mutex_unlock(&wq->wq_lock);
-			return rc;
-		}
-	}
-
-	mutex_unlock(&wq->wq_lock);
-	dev_info(dev, "wq %s enabled\n", dev_name(wq_confdev(wq)));
-
-	return 0;
-}
-
 static int idxd_config_bus_probe(struct device *dev)
 {
 	int rc = 0;
@@ -205,7 +83,7 @@ static int idxd_config_bus_probe(struct device *dev)
 	} else if (is_idxd_wq_dev(dev)) {
 		struct idxd_wq *wq = confdev_to_wq(dev);
 
-		return enable_wq(wq);
+		return drv_enable_wq(wq);
 	}
 
 	return -ENODEV;



  parent reply	other threads:[~2021-07-14 23:20 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-14 23:20 [PATCH v2 00/18] Fix idxd sub-drivers setup Dave Jiang
2021-07-14 23:20 ` [PATCH v2 01/18] dmaengine: idxd: add driver register helper Dave Jiang
2021-07-14 23:20 ` [PATCH v2 02/18] dmaengine: idxd: add driver name Dave Jiang
2021-07-14 23:20 ` [PATCH v2 03/18] dmaengine: idxd: add 'struct idxd_dev' as wrapper for conf_dev Dave Jiang
2021-07-14 23:20 ` [PATCH v2 04/18] dmaengine: idxd: remove IDXD_DEV_CONF_READY Dave Jiang
2021-07-14 23:20 ` Dave Jiang [this message]
2021-07-14 23:20 ` [PATCH v2 06/18] dmaengine: idxd: move wq_disable() to device.c Dave Jiang
2021-07-14 23:21 ` [PATCH v2 07/18] dmaengine: idxd: remove bus shutdown Dave Jiang
2021-07-14 23:21 ` [PATCH v2 08/18] dmaengine: idxd: remove iax_bus_type prototype Dave Jiang
2021-07-14 23:21 ` [PATCH v2 09/18] dmaengine: idxd: fix bus_probe() and bus_remove() for dsa_bus Dave Jiang
2021-07-14 23:21 ` [PATCH v2 10/18] dmaengine: idxd: move probe() bits for idxd 'struct device' to device.c Dave Jiang
2021-07-14 23:21 ` [PATCH v2 11/18] dmaengine: idxd: idxd: move remove() " Dave Jiang
2021-07-14 23:21 ` [PATCH v2 12/18] dmanegine: idxd: open code the dsa_drv registration Dave Jiang
2021-07-14 23:21 ` [PATCH v2 13/18] dmaengine: idxd: add type to driver in order to allow device matching Dave Jiang
2021-07-14 23:21 ` [PATCH v2 14/18] dmaengine: idxd: create idxd_device sub-driver Dave Jiang
2021-07-14 23:21 ` [PATCH v2 15/18] dmaengine: idxd: create dmaengine driver for wq 'device' Dave Jiang
2021-07-14 23:21 ` [PATCH v2 16/18] dmaengine: idxd: create user " Dave Jiang
2021-07-14 23:21 ` [PATCH v2 17/18] dmaengine: dsa: move dsa_bus_type out of idxd driver to standalone Dave Jiang
2021-07-14 23:22 ` [PATCH v2 18/18] dmaengine: idxd: move dsa_drv support to compatible mode Dave Jiang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=162630485068.631529.4798937944461278800.stgit@djiang5-desk3.ch.intel.com \
    --to=dave.jiang@intel.com \
    --cc=dan.j.williams@intel.com \
    --cc=dmaengine@vger.kernel.org \
    --cc=vkoul@kernel.org \
    --subject='Re: [PATCH v2 05/18] dmaengine: idxd: move wq_enable() to device.c' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).