From: Dave Jiang <dave.jiang@intel.com>
To: vkoul@kernel.org
Cc: Dan Williams <dan.j.williams@intel.com>, dmaengine@vger.kernel.org
Subject: [PATCH v2 10/18] dmaengine: idxd: move probe() bits for idxd 'struct device' to device.c
Date: Wed, 14 Jul 2021 16:21:19 -0700 [thread overview]
Message-ID: <162630487911.631529.2394973148629623706.stgit@djiang5-desk3.ch.intel.com> (raw)
In-Reply-To: <162630468448.631529.1963704964865951650.stgit@djiang5-desk3.ch.intel.com>
Move the code related to a ->probe() function for the idxd
'struct device' to device.c to prep for the idxd device
sub-driver in device.c.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
---
drivers/dma/idxd/device.c | 37 +++++++++++++++++++++++++++++++++++++
drivers/dma/idxd/idxd.h | 1 +
drivers/dma/idxd/sysfs.c | 40 ++--------------------------------------
3 files changed, 40 insertions(+), 38 deletions(-)
diff --git a/drivers/dma/idxd/device.c b/drivers/dma/idxd/device.c
index 8d8e249931a9..b9aa209efee4 100644
--- a/drivers/dma/idxd/device.c
+++ b/drivers/dma/idxd/device.c
@@ -1290,3 +1290,40 @@ void drv_disable_wq(struct idxd_wq *wq)
__drv_disable_wq(wq);
mutex_unlock(&wq->wq_lock);
}
+
+int idxd_device_drv_probe(struct idxd_dev *idxd_dev)
+{
+ struct idxd_device *idxd = idxd_dev_to_idxd(idxd_dev);
+ unsigned long flags;
+ int rc = 0;
+
+ /*
+ * Device should be in disabled state for the idxd_drv to load. If it's in
+ * enabled state, then the device was altered outside of driver's control.
+ * If the state is in halted state, then we don't want to proceed.
+ */
+ if (idxd->state != IDXD_DEV_DISABLED)
+ return -ENXIO;
+
+ /* Device configuration */
+ spin_lock_irqsave(&idxd->dev_lock, flags);
+ if (test_bit(IDXD_FLAG_CONFIGURABLE, &idxd->flags))
+ rc = idxd_device_config(idxd);
+ spin_unlock_irqrestore(&idxd->dev_lock, flags);
+ if (rc < 0)
+ return -ENXIO;
+
+ /* Start device */
+ rc = idxd_device_enable(idxd);
+ if (rc < 0)
+ return rc;
+
+ /* Setup DMA device without channels */
+ rc = idxd_register_dma_device(idxd);
+ if (rc < 0) {
+ idxd_device_disable(idxd);
+ return rc;
+ }
+
+ return 0;
+}
diff --git a/drivers/dma/idxd/idxd.h b/drivers/dma/idxd/idxd.h
index aa39af446fba..435cfb4fca29 100644
--- a/drivers/dma/idxd/idxd.h
+++ b/drivers/dma/idxd/idxd.h
@@ -490,6 +490,7 @@ void idxd_mask_msix_vector(struct idxd_device *idxd, int vec_id);
void idxd_unmask_msix_vector(struct idxd_device *idxd, int vec_id);
/* device control */
+int idxd_device_drv_probe(struct idxd_dev *idxd_dev);
int drv_enable_wq(struct idxd_wq *wq);
void drv_disable_wq(struct idxd_wq *wq);
int idxd_device_init_reset(struct idxd_device *idxd);
diff --git a/drivers/dma/idxd/sysfs.c b/drivers/dma/idxd/sysfs.c
index 378580942386..4822454aea45 100644
--- a/drivers/dma/idxd/sysfs.c
+++ b/drivers/dma/idxd/sysfs.c
@@ -52,44 +52,8 @@ struct bus_type dsa_bus_type = {
static int idxd_dsa_drv_probe(struct idxd_dev *idxd_dev)
{
- struct device *dev = &idxd_dev->conf_dev;
- unsigned long flags;
- int rc;
-
- if (is_idxd_dev(idxd_dev)) {
- struct idxd_device *idxd = idxd_dev_to_idxd(idxd_dev);
-
- if (idxd->state != IDXD_DEV_DISABLED)
- return -ENXIO;
-
- /* Device configuration */
- spin_lock_irqsave(&idxd->dev_lock, flags);
- if (test_bit(IDXD_FLAG_CONFIGURABLE, &idxd->flags))
- rc = idxd_device_config(idxd);
- spin_unlock_irqrestore(&idxd->dev_lock, flags);
- if (rc < 0) {
- dev_dbg(dev, "Device config failed: %d\n", rc);
- return rc;
- }
-
- /* Start device */
- rc = idxd_device_enable(idxd);
- if (rc < 0) {
- dev_warn(dev, "Device enable failed: %d\n", rc);
- return rc;
- }
-
- /* Setup DMA device without channels */
- rc = idxd_register_dma_device(idxd);
- if (rc < 0) {
- dev_dbg(dev, "Failed to register dmaengine device\n");
- idxd_device_disable(idxd);
- return rc;
- }
-
- dev_info(dev, "Device %s enabled\n", dev_name(dev));
- return 0;
- }
+ if (is_idxd_dev(idxd_dev))
+ return idxd_device_drv_probe(idxd_dev);
if (is_idxd_wq_dev(idxd_dev)) {
struct idxd_wq *wq = idxd_dev_to_wq(idxd_dev);
next prev parent reply other threads:[~2021-07-14 23:21 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-14 23:20 [PATCH v2 00/18] Fix idxd sub-drivers setup Dave Jiang
2021-07-14 23:20 ` [PATCH v2 01/18] dmaengine: idxd: add driver register helper Dave Jiang
2021-07-14 23:20 ` [PATCH v2 02/18] dmaengine: idxd: add driver name Dave Jiang
2021-07-14 23:20 ` [PATCH v2 03/18] dmaengine: idxd: add 'struct idxd_dev' as wrapper for conf_dev Dave Jiang
2021-07-14 23:20 ` [PATCH v2 04/18] dmaengine: idxd: remove IDXD_DEV_CONF_READY Dave Jiang
2021-07-14 23:20 ` [PATCH v2 05/18] dmaengine: idxd: move wq_enable() to device.c Dave Jiang
2021-07-14 23:20 ` [PATCH v2 06/18] dmaengine: idxd: move wq_disable() " Dave Jiang
2021-07-14 23:21 ` [PATCH v2 07/18] dmaengine: idxd: remove bus shutdown Dave Jiang
2021-07-14 23:21 ` [PATCH v2 08/18] dmaengine: idxd: remove iax_bus_type prototype Dave Jiang
2021-07-14 23:21 ` [PATCH v2 09/18] dmaengine: idxd: fix bus_probe() and bus_remove() for dsa_bus Dave Jiang
2021-07-14 23:21 ` Dave Jiang [this message]
2021-07-14 23:21 ` [PATCH v2 11/18] dmaengine: idxd: idxd: move remove() bits for idxd 'struct device' to device.c Dave Jiang
2021-07-14 23:21 ` [PATCH v2 12/18] dmanegine: idxd: open code the dsa_drv registration Dave Jiang
2021-07-14 23:21 ` [PATCH v2 13/18] dmaengine: idxd: add type to driver in order to allow device matching Dave Jiang
2021-07-14 23:21 ` [PATCH v2 14/18] dmaengine: idxd: create idxd_device sub-driver Dave Jiang
2021-07-14 23:21 ` [PATCH v2 15/18] dmaengine: idxd: create dmaengine driver for wq 'device' Dave Jiang
2021-07-14 23:21 ` [PATCH v2 16/18] dmaengine: idxd: create user " Dave Jiang
2021-07-14 23:21 ` [PATCH v2 17/18] dmaengine: dsa: move dsa_bus_type out of idxd driver to standalone Dave Jiang
2021-07-14 23:22 ` [PATCH v2 18/18] dmaengine: idxd: move dsa_drv support to compatible mode Dave Jiang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=162630487911.631529.2394973148629623706.stgit@djiang5-desk3.ch.intel.com \
--to=dave.jiang@intel.com \
--cc=dan.j.williams@intel.com \
--cc=dmaengine@vger.kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).