dmaengine.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v5 00/15] add ecspi ERR009165 for i.mx6/7 soc family
@ 2019-06-10  8:17 yibin.gong
  2019-06-10  8:17 ` [PATCH v5 01/15] Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core" yibin.gong
                   ` (15 more replies)
  0 siblings, 16 replies; 38+ messages in thread
From: yibin.gong @ 2019-06-10  8:17 UTC (permalink / raw)
  To: robh+dt, mark.rutland, shawnguo, s.hauer, kernel, broonie,
	festevam, vkoul, dan.j.williams, u.kleine-koenig,
	catalin.marinas, l.stach, will.deacon
  Cc: linux-spi, linux-imx, linux-arm-kernel, linux-kernel, dmaengine,
	devicetree

From: Robin Gong <yibin.gong@nxp.com>

  There is ecspi ERR009165 on i.mx6/7 soc family, which cause FIFO
transfer to be send twice in DMA mode. Please get more information from:
https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf. The workaround is adding
new sdma ram script which works in XCH  mode as PIO inside sdma instead
of SMC mode, meanwhile, 'TX_THRESHOLD' should be 0. The issue should be
exist on all legacy i.mx6/7 soc family before i.mx6ul.
  NXP fix this design issue from i.mx6ul, so newer chips including i.mx6ul/
6ull/6sll do not need this workaroud anymore. All other i.mx6/7/8 chips
still need this workaroud. This patch set add new 'fsl,imx6ul-ecspi'
for ecspi driver and 'ecspi_fixed' in sdma driver to choose if need errata
or not.
  The first two reverted patches should be the same issue, though, it
seems 'fixed' by changing to other shp script. Hope Sean or Sascha could
have the chance to test this patch set if could fix their issues.
  Besides, enable sdma support for i.mx8mm/8mq and fix ecspi1 not work
on i.mx8mm because the event id is zero.

PS:
   Please get sdma firmware from below linux-firmware and copy it to your
local rootfs /lib/firmware/imx/sdma.
https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/imx/sdma

v2:
  1.Add commit log for reverted patches.
  2.Add comment for 'ecspi_fixed' in sdma driver.
  3.Add 'fsl,imx6sll-ecspi' compatible instead of 'fsl,imx6ul-ecspi'
    rather than remove.
v3:
  1.Confirm with design team make sure ERR009165 fixed on i.mx6ul/i.mx6ull
    /i.mx6sll, not fixed on i.mx8m/8mm and other i.mx6/7 legacy chips.
    Correct dts related dts patch in v2.
  2.Clean eratta information in binding doc and new 'tx_glitch_fixed' flag
    in spi-imx driver to state ERR009165 fixed or not.
  3.Enlarge burst size to fifo size for tx since tx_wml set to 0 in the
    errata workaroud, thus improve performance as possible.
v4:
  1.add Ack tag from Mark and Vinod
  2. remove checking 'event_id1' zero as 'event_id0'.
v5:
  1.Add another patch for compatible with the current uart driver which
    using rom script, so both uart ram script and rom script supported
    in latest firmware, by default uart rom script used. UART driver
    will be broken without this patch. Latest sdma firmware has been
    already updated in linux-firmware. 

Robin Gong (15):
  Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"
  Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"
  Revert "dmaengine: imx-sdma: refine to load context only once"
  dmaengine: imx-sdma: remove dupilicated sdma_load_context
  dmaengine: imx-sdma: add mcu_2_ecspi script
  spi: imx: fix ERR009165
  spi: imx: remove ERR009165 workaround on i.mx6ul
  spi: imx: add new i.mx6ul compatible name in binding doc
  dmaengine: imx-sdma: remove ERR009165 on i.mx6ul
  dma: imx-sdma: add i.mx6ul/6sx compatible name
  dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm
  ARM: dts: imx6ul: add dma support on ecspi
  ARM: dts: imx6sll: correct sdma compatible
  arm64: defconfig: Enable SDMA on i.mx8mq/8mm
  dmaengine: imx-sdma: add uart rom script

 .../devicetree/bindings/dma/fsl-imx-sdma.txt       |  2 +
 .../devicetree/bindings/spi/fsl-imx-cspi.txt       |  1 +
 arch/arm/boot/dts/imx6q.dtsi                       |  2 +-
 arch/arm/boot/dts/imx6qdl.dtsi                     |  8 +-
 arch/arm/boot/dts/imx6sll.dtsi                     |  2 +-
 arch/arm/boot/dts/imx6ul.dtsi                      |  8 ++
 arch/arm64/configs/defconfig                       |  3 +
 drivers/dma/imx-sdma.c                             | 88 ++++++++++++++++------
 drivers/spi/spi-imx.c                              | 61 ++++++++++++---
 include/linux/platform_data/dma-imx-sdma.h         | 11 ++-
 10 files changed, 145 insertions(+), 41 deletions(-)

-- 
2.7.4


^ permalink raw reply	[flat|nested] 38+ messages in thread

* [PATCH v5 01/15] Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"
  2019-06-10  8:17 [PATCH v5 00/15] add ecspi ERR009165 for i.mx6/7 soc family yibin.gong
@ 2019-06-10  8:17 ` yibin.gong
  2019-06-10  8:17 ` [PATCH v5 02/15] Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores" yibin.gong
                   ` (14 subsequent siblings)
  15 siblings, 0 replies; 38+ messages in thread
From: yibin.gong @ 2019-06-10  8:17 UTC (permalink / raw)
  To: robh+dt, mark.rutland, shawnguo, s.hauer, kernel, broonie,
	festevam, vkoul, dan.j.williams, u.kleine-koenig,
	catalin.marinas, l.stach, will.deacon
  Cc: linux-spi, linux-imx, linux-arm-kernel, linux-kernel, dmaengine,
	devicetree

From: Robin Gong <yibin.gong@nxp.com>

  There are two ways for SDMA accessing SPBA devices: one is SDMA->AIPS
->SPBA(masterA port), another is SDMA->SPBA(masterC port). Please refer
to the 'Figure 58-1. i.MX 6Dual/6Quad SPBA connectivity' of i.mx6DQ
Reference Manual. SDMA provide the corresponding app_2_mcu/mcu_2_app and
shp_2_mcu/mcu_2_shp script for such two options. So both AIPS and SPBA
scripts should keep the same behaviour, the issue only caught in AIPS
script sounds not solide.
  The issue is more likely as the ecspi errata
ERR009165(http://www.nxp.com/docs/en/errata/IMX6DQCE.pdf):
eCSPI: TXFIFO empty flag glitch can cause the current FIFO transfer to
       be sent twice
So revert commit 'df07101e1c4a' firstly.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 arch/arm/boot/dts/imx6q.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index d038f41..7175898 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -172,7 +172,7 @@
 					clocks = <&clks IMX6Q_CLK_ECSPI5>,
 						 <&clks IMX6Q_CLK_ECSPI5>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 11 8 1>, <&sdma 12 8 2>;
+					dmas = <&sdma 11 7 1>, <&sdma 12 7 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH v5 02/15] Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"
  2019-06-10  8:17 [PATCH v5 00/15] add ecspi ERR009165 for i.mx6/7 soc family yibin.gong
  2019-06-10  8:17 ` [PATCH v5 01/15] Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core" yibin.gong
@ 2019-06-10  8:17 ` yibin.gong
  2019-06-10  8:17 ` [PATCH v5 03/15] Revert "dmaengine: imx-sdma: refine to load context only once" yibin.gong
                   ` (13 subsequent siblings)
  15 siblings, 0 replies; 38+ messages in thread
From: yibin.gong @ 2019-06-10  8:17 UTC (permalink / raw)
  To: robh+dt, mark.rutland, shawnguo, s.hauer, kernel, broonie,
	festevam, vkoul, dan.j.williams, u.kleine-koenig,
	catalin.marinas, l.stach, will.deacon
  Cc: linux-spi, linux-imx, linux-arm-kernel, linux-kernel, dmaengine,
	devicetree

From: Robin Gong <yibin.gong@nxp.com>

  There are two ways for SDMA accessing SPBA devices: one is SDMA->AIPS
->SPBA(masterA port), another is SDMA->SPBA(masterC port). Please refer
to the 'Figure 58-1. i.MX 6Dual/6Quad SPBA connectivity' of i.mx6DQ
Reference Manual. SDMA provide the corresponding app_2_mcu/mcu_2_app and
shp_2_mcu/mcu_2_shp script for such two options. So both AIPS and SPBA
scripts should keep the same behaviour, the issue only caught in AIPS
script sounds not solide.
  The issue is more likely as the ecspi errata
ERR009165(http://www.nxp.com/docs/en/errata/IMX6DQCE.pdf):
eCSPI: TXFIFO empty flag glitch can cause the current FIFO transfer to
           be sent twice
So revert commit 'dd4b487b32a3' firstly.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 arch/arm/boot/dts/imx6qdl.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 929fc7d..b352ea2 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -339,7 +339,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI1>,
 						 <&clks IMX6QDL_CLK_ECSPI1>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 3 8 1>, <&sdma 4 8 2>;
+					dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
@@ -353,7 +353,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI2>,
 						 <&clks IMX6QDL_CLK_ECSPI2>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 5 8 1>, <&sdma 6 8 2>;
+					dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
@@ -367,7 +367,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI3>,
 						 <&clks IMX6QDL_CLK_ECSPI3>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 7 8 1>, <&sdma 8 8 2>;
+					dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
@@ -381,7 +381,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI4>,
 						 <&clks IMX6QDL_CLK_ECSPI4>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 9 8 1>, <&sdma 10 8 2>;
+					dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH v5 03/15] Revert "dmaengine: imx-sdma: refine to load context only once"
  2019-06-10  8:17 [PATCH v5 00/15] add ecspi ERR009165 for i.mx6/7 soc family yibin.gong
  2019-06-10  8:17 ` [PATCH v5 01/15] Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core" yibin.gong
  2019-06-10  8:17 ` [PATCH v5 02/15] Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores" yibin.gong
@ 2019-06-10  8:17 ` yibin.gong
  2019-06-10  8:17 ` [PATCH v5 04/15] dmaengine: imx-sdma: remove dupilicated sdma_load_context yibin.gong
                   ` (12 subsequent siblings)
  15 siblings, 0 replies; 38+ messages in thread
From: yibin.gong @ 2019-06-10  8:17 UTC (permalink / raw)
  To: robh+dt, mark.rutland, shawnguo, s.hauer, kernel, broonie,
	festevam, vkoul, dan.j.williams, u.kleine-koenig,
	catalin.marinas, l.stach, will.deacon
  Cc: linux-spi, linux-imx, linux-arm-kernel, linux-kernel, dmaengine,
	devicetree

From: Robin Gong <yibin.gong@nxp.com>

This reverts commit ad0d92d7ba6aecbe2705907c38ff8d8be4da1e9c, because
in spi-imx case, burst length may be changed dynamically.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 drivers/dma/imx-sdma.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index ca296f0..21db6b69 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -377,7 +377,6 @@ struct sdma_channel {
 	unsigned long			watermark_level;
 	u32				shp_addr, per_addr;
 	enum dma_status			status;
-	bool				context_loaded;
 	struct imx_dma_data		data;
 	struct work_struct		terminate_worker;
 };
@@ -988,9 +987,6 @@ static int sdma_load_context(struct sdma_channel *sdmac)
 	int ret;
 	unsigned long flags;
 
-	if (sdmac->context_loaded)
-		return 0;
-
 	if (sdmac->direction == DMA_DEV_TO_MEM)
 		load_address = sdmac->pc_from_device;
 	else if (sdmac->direction == DMA_DEV_TO_DEV)
@@ -1033,8 +1029,6 @@ static int sdma_load_context(struct sdma_channel *sdmac)
 
 	spin_unlock_irqrestore(&sdma->channel_0_lock, flags);
 
-	sdmac->context_loaded = true;
-
 	return ret;
 }
 
@@ -1074,7 +1068,6 @@ static void sdma_channel_terminate_work(struct work_struct *work)
 	sdmac->desc = NULL;
 	spin_unlock_irqrestore(&sdmac->vc.lock, flags);
 	vchan_dma_desc_free_list(&sdmac->vc, &head);
-	sdmac->context_loaded = false;
 }
 
 static int sdma_disable_channel_async(struct dma_chan *chan)
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH v5 04/15] dmaengine: imx-sdma: remove dupilicated sdma_load_context
  2019-06-10  8:17 [PATCH v5 00/15] add ecspi ERR009165 for i.mx6/7 soc family yibin.gong
                   ` (2 preceding siblings ...)
  2019-06-10  8:17 ` [PATCH v5 03/15] Revert "dmaengine: imx-sdma: refine to load context only once" yibin.gong
@ 2019-06-10  8:17 ` yibin.gong
  2019-06-10  8:17 ` [PATCH v5 05/15] dmaengine: imx-sdma: add mcu_2_ecspi script yibin.gong
                   ` (11 subsequent siblings)
  15 siblings, 0 replies; 38+ messages in thread
From: yibin.gong @ 2019-06-10  8:17 UTC (permalink / raw)
  To: robh+dt, mark.rutland, shawnguo, s.hauer, kernel, broonie,
	festevam, vkoul, dan.j.williams, u.kleine-koenig,
	catalin.marinas, l.stach, will.deacon
  Cc: linux-spi, linux-imx, linux-arm-kernel, linux-kernel, dmaengine,
	devicetree

From: Robin Gong <yibin.gong@nxp.com>

Since sdma_transfer_init() will do sdma_load_context before any
sdma transfer, no need once more in sdma_config_channel().

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
---
 drivers/dma/imx-sdma.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 21db6b69..dbd1dcd 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -1134,7 +1134,6 @@ static void sdma_set_watermarklevel_for_p2p(struct sdma_channel *sdmac)
 static int sdma_config_channel(struct dma_chan *chan)
 {
 	struct sdma_channel *sdmac = to_sdma_chan(chan);
-	int ret;
 
 	sdma_disable_channel(chan);
 
@@ -1174,9 +1173,7 @@ static int sdma_config_channel(struct dma_chan *chan)
 		sdmac->watermark_level = 0; /* FIXME: M3_BASE_ADDRESS */
 	}
 
-	ret = sdma_load_context(sdmac);
-
-	return ret;
+	return 0;
 }
 
 static int sdma_set_channel_priority(struct sdma_channel *sdmac,
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH v5 05/15] dmaengine: imx-sdma: add mcu_2_ecspi script
  2019-06-10  8:17 [PATCH v5 00/15] add ecspi ERR009165 for i.mx6/7 soc family yibin.gong
                   ` (3 preceding siblings ...)
  2019-06-10  8:17 ` [PATCH v5 04/15] dmaengine: imx-sdma: remove dupilicated sdma_load_context yibin.gong
@ 2019-06-10  8:17 ` yibin.gong
  2019-06-10  8:17 ` [PATCH v5 06/15] spi: imx: fix ERR009165 yibin.gong
                   ` (10 subsequent siblings)
  15 siblings, 0 replies; 38+ messages in thread
From: yibin.gong @ 2019-06-10  8:17 UTC (permalink / raw)
  To: robh+dt, mark.rutland, shawnguo, s.hauer, kernel, broonie,
	festevam, vkoul, dan.j.williams, u.kleine-koenig,
	catalin.marinas, l.stach, will.deacon
  Cc: linux-spi, linux-imx, linux-arm-kernel, linux-kernel, dmaengine,
	devicetree

From: Robin Gong <yibin.gong@nxp.com>

Add mcu_2_ecspi script to fix ecspi errata ERR009165.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
---
 drivers/dma/imx-sdma.c                     | 3 +++
 include/linux/platform_data/dma-imx-sdma.h | 1 +
 2 files changed, 4 insertions(+)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index dbd1dcd..61af656 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -924,6 +924,9 @@ static void sdma_get_pc(struct sdma_channel *sdmac,
 		emi_2_per = sdma->script_addrs->mcu_2_ata_addr;
 		break;
 	case IMX_DMATYPE_CSPI:
+		per_2_emi = sdma->script_addrs->app_2_mcu_addr;
+		emi_2_per = sdma->script_addrs->mcu_2_ecspi_addr;
+		break;
 	case IMX_DMATYPE_EXT:
 	case IMX_DMATYPE_SSI:
 	case IMX_DMATYPE_SAI:
diff --git a/include/linux/platform_data/dma-imx-sdma.h b/include/linux/platform_data/dma-imx-sdma.h
index 6eaa53c..f794fee 100644
--- a/include/linux/platform_data/dma-imx-sdma.h
+++ b/include/linux/platform_data/dma-imx-sdma.h
@@ -51,6 +51,7 @@ struct sdma_script_start_addrs {
 	/* End of v2 array */
 	s32 zcanfd_2_mcu_addr;
 	s32 zqspi_2_mcu_addr;
+	s32 mcu_2_ecspi_addr;
 	/* End of v3 array */
 };
 
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH v5 06/15] spi: imx: fix ERR009165
  2019-06-10  8:17 [PATCH v5 00/15] add ecspi ERR009165 for i.mx6/7 soc family yibin.gong
                   ` (4 preceding siblings ...)
  2019-06-10  8:17 ` [PATCH v5 05/15] dmaengine: imx-sdma: add mcu_2_ecspi script yibin.gong
@ 2019-06-10  8:17 ` yibin.gong
  2019-06-10  8:17 ` [PATCH v5 07/15] spi: imx: remove ERR009165 workaround on i.mx6ul yibin.gong
                   ` (9 subsequent siblings)
  15 siblings, 0 replies; 38+ messages in thread
From: yibin.gong @ 2019-06-10  8:17 UTC (permalink / raw)
  To: robh+dt, mark.rutland, shawnguo, s.hauer, kernel, broonie,
	festevam, vkoul, dan.j.williams, u.kleine-koenig,
	catalin.marinas, l.stach, will.deacon
  Cc: linux-spi, linux-imx, linux-arm-kernel, linux-kernel, dmaengine,
	devicetree

From: Robin Gong <yibin.gong@nxp.com>

Change to XCH  mode even in dma mode, please refer to the below
errata:
https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Acked-by: Mark Brown <broonie@kernel.org>
---
 drivers/spi/spi-imx.c | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 09c9a1e..6795910 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -585,8 +585,9 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
 	ctrl |= mx51_ecspi_clkdiv(spi_imx, t->speed_hz, &clk);
 	spi_imx->spi_bus_clk = clk;
 
+	/* ERR009165: work in XHC mode as PIO */
 	if (spi_imx->usedma)
-		ctrl |= MX51_ECSPI_CTRL_SMC;
+		ctrl &= ~MX51_ECSPI_CTRL_SMC;
 
 	writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
 
@@ -612,12 +613,14 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
 
 static void mx51_setup_wml(struct spi_imx_data *spi_imx)
 {
+	u32 tx_wml = 0;
+
 	/*
 	 * Configure the DMA register: setup the watermark
 	 * and enable DMA request.
 	 */
 	writel(MX51_ECSPI_DMA_RX_WML(spi_imx->wml - 1) |
-		MX51_ECSPI_DMA_TX_WML(spi_imx->wml) |
+		MX51_ECSPI_DMA_TX_WML(tx_wml) |
 		MX51_ECSPI_DMA_RXT_WML(spi_imx->wml) |
 		MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN |
 		MX51_ECSPI_DMA_RXTDEN, spi_imx->base + MX51_ECSPI_DMA);
@@ -1171,7 +1174,11 @@ static int spi_imx_dma_configure(struct spi_master *master)
 	tx.direction = DMA_MEM_TO_DEV;
 	tx.dst_addr = spi_imx->base_phys + MXC_CSPITXDATA;
 	tx.dst_addr_width = buswidth;
-	tx.dst_maxburst = spi_imx->wml;
+	/*
+	 * For ERR009165 with tx_wml = 0 could enlarge burst size to fifo size
+	 * to speed up fifo filling as possible.
+	 */
+	tx.dst_maxburst = spi_imx->devtype_data->fifo_size;
 	ret = dmaengine_slave_config(master->dma_tx, &tx);
 	if (ret) {
 		dev_err(spi_imx->dev, "TX dma configuration failed with %d\n", ret);
@@ -1265,10 +1272,6 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
 {
 	int ret;
 
-	/* use pio mode for i.mx6dl chip TKT238285 */
-	if (of_machine_is_compatible("fsl,imx6dl"))
-		return 0;
-
 	spi_imx->wml = spi_imx->devtype_data->fifo_size / 2;
 
 	/* Prepare for TX DMA: */
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH v5 07/15] spi: imx: remove ERR009165 workaround on i.mx6ul
  2019-06-10  8:17 [PATCH v5 00/15] add ecspi ERR009165 for i.mx6/7 soc family yibin.gong
                   ` (5 preceding siblings ...)
  2019-06-10  8:17 ` [PATCH v5 06/15] spi: imx: fix ERR009165 yibin.gong
@ 2019-06-10  8:17 ` yibin.gong
  2019-06-10  8:17 ` [PATCH v5 08/15] spi: imx: add new i.mx6ul compatible name in binding doc yibin.gong
                   ` (8 subsequent siblings)
  15 siblings, 0 replies; 38+ messages in thread
From: yibin.gong @ 2019-06-10  8:17 UTC (permalink / raw)
  To: robh+dt, mark.rutland, shawnguo, s.hauer, kernel, broonie,
	festevam, vkoul, dan.j.williams, u.kleine-koenig,
	catalin.marinas, l.stach, will.deacon
  Cc: linux-spi, linux-imx, linux-arm-kernel, linux-kernel, dmaengine,
	devicetree

From: Robin Gong <yibin.gong@nxp.com>

ERR009165 fixed on i.mx6ul/6ull/6sll. All other i.mx6/7 and
i.mx8m/8mm still need this errata. Please refer to nxp official
errata document from https://www.nxp.com/ .

For removing workaround on those chips. Add new i.mx6ul type.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Acked-by: Mark Brown <broonie@kernel.org>
---
 drivers/spi/spi-imx.c | 50 +++++++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 45 insertions(+), 5 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 6795910..91660dc 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -57,6 +57,7 @@ enum spi_imx_devtype {
 	IMX35_CSPI,	/* CSPI on all i.mx except above */
 	IMX51_ECSPI,	/* ECSPI on i.mx51 */
 	IMX53_ECSPI,	/* ECSPI on i.mx53 and later */
+	IMX6UL_ECSPI,	/* ERR009165 fix from i.mx6ul */
 };
 
 struct spi_imx_data;
@@ -75,6 +76,11 @@ struct spi_imx_devtype_data {
 	bool has_slavemode;
 	unsigned int fifo_size;
 	bool dynamic_burst;
+	/*
+	 * ERR009165 fixed or not:
+	 * https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf
+	 */
+	bool tx_glitch_fixed;
 	enum spi_imx_devtype devtype;
 };
 
@@ -128,7 +134,8 @@ static inline int is_imx35_cspi(struct spi_imx_data *d)
 
 static inline int is_imx51_ecspi(struct spi_imx_data *d)
 {
-	return d->devtype_data->devtype == IMX51_ECSPI;
+	return d->devtype_data->devtype == IMX51_ECSPI ||
+	       d->devtype_data->devtype == IMX6UL_ECSPI;
 }
 
 static inline int is_imx53_ecspi(struct spi_imx_data *d)
@@ -585,9 +592,16 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
 	ctrl |= mx51_ecspi_clkdiv(spi_imx, t->speed_hz, &clk);
 	spi_imx->spi_bus_clk = clk;
 
-	/* ERR009165: work in XHC mode as PIO */
-	if (spi_imx->usedma)
-		ctrl &= ~MX51_ECSPI_CTRL_SMC;
+	/*
+	 * ERR009165: work in XHC mode instead of SMC as PIO on the chips
+	 * before i.mx6ul.
+	 */
+	if (spi_imx->usedma) {
+		if (spi_imx->devtype_data->tx_glitch_fixed)
+			ctrl |= MX51_ECSPI_CTRL_SMC;
+		else
+			ctrl &= ~MX51_ECSPI_CTRL_SMC;
+	}
 
 	writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
 
@@ -615,6 +629,8 @@ static void mx51_setup_wml(struct spi_imx_data *spi_imx)
 {
 	u32 tx_wml = 0;
 
+	if (spi_imx->devtype_data->tx_glitch_fixed)
+		tx_wml = spi_imx->wml;
 	/*
 	 * Configure the DMA register: setup the watermark
 	 * and enable DMA request.
@@ -1012,6 +1028,23 @@ static struct spi_imx_devtype_data imx53_ecspi_devtype_data = {
 	.devtype = IMX53_ECSPI,
 };
 
+static struct spi_imx_devtype_data imx6ul_ecspi_devtype_data = {
+	.intctrl = mx51_ecspi_intctrl,
+	.prepare_message = mx51_ecspi_prepare_message,
+	.prepare_transfer = mx51_ecspi_prepare_transfer,
+	.trigger = mx51_ecspi_trigger,
+	.rx_available = mx51_ecspi_rx_available,
+	.reset = mx51_ecspi_reset,
+	.setup_wml = mx51_setup_wml,
+	.fifo_size = 64,
+	.has_dmamode = true,
+	.dynamic_burst = true,
+	.has_slavemode = true,
+	.tx_glitch_fixed = true,
+	.disable = mx51_ecspi_disable,
+	.devtype = IMX6UL_ECSPI,
+};
+
 static const struct platform_device_id spi_imx_devtype[] = {
 	{
 		.name = "imx1-cspi",
@@ -1035,6 +1068,9 @@ static const struct platform_device_id spi_imx_devtype[] = {
 		.name = "imx53-ecspi",
 		.driver_data = (kernel_ulong_t) &imx53_ecspi_devtype_data,
 	}, {
+		.name = "imx6ul-ecspi",
+		.driver_data = (kernel_ulong_t) &imx6ul_ecspi_devtype_data,
+	}, {
 		/* sentinel */
 	}
 };
@@ -1047,6 +1083,7 @@ static const struct of_device_id spi_imx_dt_ids[] = {
 	{ .compatible = "fsl,imx35-cspi", .data = &imx35_cspi_devtype_data, },
 	{ .compatible = "fsl,imx51-ecspi", .data = &imx51_ecspi_devtype_data, },
 	{ .compatible = "fsl,imx53-ecspi", .data = &imx53_ecspi_devtype_data, },
+	{ .compatible = "fsl,imx6ul-ecspi", .data = &imx6ul_ecspi_devtype_data, },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, spi_imx_dt_ids);
@@ -1178,7 +1215,10 @@ static int spi_imx_dma_configure(struct spi_master *master)
 	 * For ERR009165 with tx_wml = 0 could enlarge burst size to fifo size
 	 * to speed up fifo filling as possible.
 	 */
-	tx.dst_maxburst = spi_imx->devtype_data->fifo_size;
+	if (spi_imx->devtype_data->tx_glitch_fixed)
+		tx.dst_maxburst = spi_imx->wml;
+	else
+		tx.dst_maxburst = spi_imx->devtype_data->fifo_size;
 	ret = dmaengine_slave_config(master->dma_tx, &tx);
 	if (ret) {
 		dev_err(spi_imx->dev, "TX dma configuration failed with %d\n", ret);
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH v5 08/15] spi: imx: add new i.mx6ul compatible name in binding doc
  2019-06-10  8:17 [PATCH v5 00/15] add ecspi ERR009165 for i.mx6/7 soc family yibin.gong
                   ` (6 preceding siblings ...)
  2019-06-10  8:17 ` [PATCH v5 07/15] spi: imx: remove ERR009165 workaround on i.mx6ul yibin.gong
@ 2019-06-10  8:17 ` yibin.gong
  2019-07-09  2:17   ` Rob Herring
  2019-06-10  8:17 ` [PATCH v5 09/15] dmaengine: imx-sdma: remove ERR009165 on i.mx6ul yibin.gong
                   ` (7 subsequent siblings)
  15 siblings, 1 reply; 38+ messages in thread
From: yibin.gong @ 2019-06-10  8:17 UTC (permalink / raw)
  To: robh+dt, mark.rutland, shawnguo, s.hauer, kernel, broonie,
	festevam, vkoul, dan.j.williams, u.kleine-koenig,
	catalin.marinas, l.stach, will.deacon
  Cc: linux-spi, linux-imx, linux-arm-kernel, linux-kernel, dmaengine,
	devicetree

From: Robin Gong <yibin.gong@nxp.com>

ERR009165 fixed from i.mx6ul, add its compatible name in binding
doc.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Acked-by: Mark Brown <broonie@kernel.org>
---
 Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
index 2d32641..b3d02a3 100644
--- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
+++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
@@ -10,6 +10,7 @@ Required properties:
   - "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35
   - "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51
   - "fsl,imx53-ecspi" for SPI compatible with the one integrated on i.MX53 and later Soc
+  - "fsl,imx6ul-ecspi" for SPI compatible with the one integrated on i.MX6UL and later Soc
   - "fsl,imx8mq-ecspi" for SPI compatible with the one integrated on i.MX8M
 - reg : Offset and length of the register set for the device
 - interrupts : Should contain CSPI/eCSPI interrupt
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH v5 09/15] dmaengine: imx-sdma: remove ERR009165 on i.mx6ul
  2019-06-10  8:17 [PATCH v5 00/15] add ecspi ERR009165 for i.mx6/7 soc family yibin.gong
                   ` (7 preceding siblings ...)
  2019-06-10  8:17 ` [PATCH v5 08/15] spi: imx: add new i.mx6ul compatible name in binding doc yibin.gong
@ 2019-06-10  8:17 ` yibin.gong
  2019-06-10  8:17 ` [PATCH v5 10/15] dma: imx-sdma: add i.mx6ul/6sx compatible name yibin.gong
                   ` (6 subsequent siblings)
  15 siblings, 0 replies; 38+ messages in thread
From: yibin.gong @ 2019-06-10  8:17 UTC (permalink / raw)
  To: robh+dt, mark.rutland, shawnguo, s.hauer, kernel, broonie,
	festevam, vkoul, dan.j.williams, u.kleine-koenig,
	catalin.marinas, l.stach, will.deacon
  Cc: linux-spi, linux-imx, linux-arm-kernel, linux-kernel, dmaengine,
	devicetree

From: Robin Gong <yibin.gong@nxp.com>

ECSPI issue fixed from i.mx6ul at hardware level, no need
ERR009165 anymore on those chips such as i.mx8mq. Add i.mx6sx
from where i.mx6ul source.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
---
 drivers/dma/imx-sdma.c | 51 +++++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 50 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 61af656..525ca89 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -419,6 +419,13 @@ struct sdma_driver_data {
 	int num_events;
 	struct sdma_script_start_addrs	*script_addrs;
 	bool check_ratio;
+	/*
+	 * ecspi ERR009165 fixed should be done in sdma script
+	 * and it has been fixed in soc from i.mx6ul.
+	 * please get more information from the below link:
+	 * https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf
+	 */
+	bool ecspi_fixed;
 };
 
 struct sdma_engine {
@@ -539,6 +546,31 @@ static struct sdma_driver_data sdma_imx6q = {
 	.script_addrs = &sdma_script_imx6q,
 };
 
+static struct sdma_script_start_addrs sdma_script_imx6sx = {
+	.ap_2_ap_addr = 642,
+	.uart_2_mcu_addr = 817,
+	.mcu_2_app_addr = 747,
+	.uartsh_2_mcu_addr = 1032,
+	.mcu_2_shp_addr = 960,
+	.app_2_mcu_addr = 683,
+	.shp_2_mcu_addr = 891,
+	.spdif_2_mcu_addr = 1100,
+	.mcu_2_spdif_addr = 1134,
+};
+
+static struct sdma_driver_data sdma_imx6sx = {
+	.chnenbl0 = SDMA_CHNENBL0_IMX35,
+	.num_events = 48,
+	.script_addrs = &sdma_script_imx6sx,
+};
+
+static struct sdma_driver_data sdma_imx6ul = {
+	.chnenbl0 = SDMA_CHNENBL0_IMX35,
+	.num_events = 48,
+	.script_addrs = &sdma_script_imx6sx,
+	.ecspi_fixed = true,
+};
+
 static struct sdma_script_start_addrs sdma_script_imx7d = {
 	.ap_2_ap_addr = 644,
 	.uart_2_mcu_addr = 819,
@@ -584,9 +616,15 @@ static const struct platform_device_id sdma_devtypes[] = {
 		.name = "imx6q-sdma",
 		.driver_data = (unsigned long)&sdma_imx6q,
 	}, {
+		.name = "imx6sx-sdma",
+		.driver_data = (unsigned long)&sdma_imx6sx,
+	}, {
 		.name = "imx7d-sdma",
 		.driver_data = (unsigned long)&sdma_imx7d,
 	}, {
+		.name = "imx6ul-sdma",
+		.driver_data = (unsigned long)&sdma_imx6ul,
+	}, {
 		.name = "imx8mq-sdma",
 		.driver_data = (unsigned long)&sdma_imx8mq,
 	}, {
@@ -602,7 +640,9 @@ static const struct of_device_id sdma_dt_ids[] = {
 	{ .compatible = "fsl,imx35-sdma", .data = &sdma_imx35, },
 	{ .compatible = "fsl,imx31-sdma", .data = &sdma_imx31, },
 	{ .compatible = "fsl,imx25-sdma", .data = &sdma_imx25, },
+	{ .compatible = "fsl,imx6sx-sdma", .data = &sdma_imx6sx, },
 	{ .compatible = "fsl,imx7d-sdma", .data = &sdma_imx7d, },
+	{ .compatible = "fsl,imx6ul-sdma", .data = &sdma_imx6ul, },
 	{ .compatible = "fsl,imx8mq-sdma", .data = &sdma_imx8mq, },
 	{ /* sentinel */ }
 };
@@ -1166,8 +1206,17 @@ static int sdma_config_channel(struct dma_chan *chan)
 			if (sdmac->peripheral_type == IMX_DMATYPE_ASRC_SP ||
 			    sdmac->peripheral_type == IMX_DMATYPE_ASRC)
 				sdma_set_watermarklevel_for_p2p(sdmac);
-		} else
+		} else {
+			/*
+			 * ERR009165 fixed from i.mx6ul, no errata need,
+			 * set bit31 to let sdma script skip the errata.
+			 */
+			if (sdmac->peripheral_type == IMX_DMATYPE_CSPI &&
+			    sdmac->direction == DMA_MEM_TO_DEV &&
+			    sdmac->sdma->drvdata->ecspi_fixed)
+				__set_bit(31, &sdmac->watermark_level);
 			__set_bit(sdmac->event_id0, sdmac->event_mask);
+		}
 
 		/* Address */
 		sdmac->shp_addr = sdmac->per_address;
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH v5 10/15] dma: imx-sdma: add i.mx6ul/6sx compatible name
  2019-06-10  8:17 [PATCH v5 00/15] add ecspi ERR009165 for i.mx6/7 soc family yibin.gong
                   ` (8 preceding siblings ...)
  2019-06-10  8:17 ` [PATCH v5 09/15] dmaengine: imx-sdma: remove ERR009165 on i.mx6ul yibin.gong
@ 2019-06-10  8:17 ` yibin.gong
  2019-06-11 22:35   ` Rob Herring
  2019-06-10  8:17 ` [PATCH v5 11/15] dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm yibin.gong
                   ` (5 subsequent siblings)
  15 siblings, 1 reply; 38+ messages in thread
From: yibin.gong @ 2019-06-10  8:17 UTC (permalink / raw)
  To: robh+dt, mark.rutland, shawnguo, s.hauer, kernel, broonie,
	festevam, vkoul, dan.j.williams, u.kleine-koenig,
	catalin.marinas, l.stach, will.deacon
  Cc: linux-spi, linux-imx, linux-arm-kernel, linux-kernel, dmaengine,
	devicetree

From: Robin Gong <yibin.gong@nxp.com>

Add i.mx6ul and i.mx6sx compatible name in binding doc.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
index 9d8bbac..d024a83 100644
--- a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
+++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
@@ -9,6 +9,8 @@ Required properties:
       "fsl,imx53-sdma"
       "fsl,imx6q-sdma"
       "fsl,imx7d-sdma"
+      "fsl,imx6sx-sdma"
+      "fsl,imx6ul-sdma"
       "fsl,imx8mq-sdma"
   The -to variants should be preferred since they allow to determine the
   correct ROM script addresses needed for the driver to work without additional
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH v5 11/15] dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm
  2019-06-10  8:17 [PATCH v5 00/15] add ecspi ERR009165 for i.mx6/7 soc family yibin.gong
                   ` (9 preceding siblings ...)
  2019-06-10  8:17 ` [PATCH v5 10/15] dma: imx-sdma: add i.mx6ul/6sx compatible name yibin.gong
@ 2019-06-10  8:17 ` yibin.gong
  2019-09-24 13:27   ` Schrempf Frieder
  2019-06-10  8:17 ` [PATCH v5 12/15] ARM: dts: imx6ul: add dma support on ecspi yibin.gong
                   ` (4 subsequent siblings)
  15 siblings, 1 reply; 38+ messages in thread
From: yibin.gong @ 2019-06-10  8:17 UTC (permalink / raw)
  To: robh+dt, mark.rutland, shawnguo, s.hauer, kernel, broonie,
	festevam, vkoul, dan.j.williams, u.kleine-koenig,
	catalin.marinas, l.stach, will.deacon
  Cc: linux-spi, linux-imx, linux-arm-kernel, linux-kernel, dmaengine,
	devicetree

From: Robin Gong <yibin.gong@nxp.com>

Because the number of ecspi1 rx event on i.mx8mm is 0, the condition
check ignore such special case without dma channel enabled, which caused
ecspi1 rx works failed. Actually, no need to check event_id0/event_id1
and replace checking 'event_id1' with 'DMA_DEV_TO_DEV', so that configure
event_id1 only in case DEV_TO_DEV.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
---
 drivers/dma/imx-sdma.c | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 525ca89..f7c150d 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -1202,7 +1202,7 @@ static int sdma_config_channel(struct dma_chan *chan)
 	if ((sdmac->peripheral_type != IMX_DMATYPE_MEMORY) &&
 			(sdmac->peripheral_type != IMX_DMATYPE_DSP)) {
 		/* Handle multiple event channels differently */
-		if (sdmac->event_id1) {
+		if (sdmac->direction == DMA_DEV_TO_DEV) {
 			if (sdmac->peripheral_type == IMX_DMATYPE_ASRC_SP ||
 			    sdmac->peripheral_type == IMX_DMATYPE_ASRC)
 				sdma_set_watermarklevel_for_p2p(sdmac);
@@ -1370,9 +1370,9 @@ static void sdma_free_chan_resources(struct dma_chan *chan)
 
 	sdma_channel_synchronize(chan);
 
-	if (sdmac->event_id0)
-		sdma_event_disable(sdmac, sdmac->event_id0);
-	if (sdmac->event_id1)
+	sdma_event_disable(sdmac, sdmac->event_id0);
+
+	if (sdmac->direction == DMA_DEV_TO_DEV)
 		sdma_event_disable(sdmac, sdmac->event_id1);
 
 	sdmac->event_id0 = 0;
@@ -1670,13 +1670,11 @@ static int sdma_config(struct dma_chan *chan,
 	memcpy(&sdmac->slave_config, dmaengine_cfg, sizeof(*dmaengine_cfg));
 
 	/* Set ENBLn earlier to make sure dma request triggered after that */
-	if (sdmac->event_id0) {
-		if (sdmac->event_id0 >= sdmac->sdma->drvdata->num_events)
-			return -EINVAL;
-		sdma_event_enable(sdmac, sdmac->event_id0);
-	}
+	if (sdmac->event_id0 >= sdmac->sdma->drvdata->num_events)
+		return -EINVAL;
+	sdma_event_enable(sdmac, sdmac->event_id0);
 
-	if (sdmac->event_id1) {
+	if (sdmac->direction == DMA_DEV_TO_DEV) {
 		if (sdmac->event_id1 >= sdmac->sdma->drvdata->num_events)
 			return -EINVAL;
 		sdma_event_enable(sdmac, sdmac->event_id1);
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH v5 12/15] ARM: dts: imx6ul: add dma support on ecspi
  2019-06-10  8:17 [PATCH v5 00/15] add ecspi ERR009165 for i.mx6/7 soc family yibin.gong
                   ` (10 preceding siblings ...)
  2019-06-10  8:17 ` [PATCH v5 11/15] dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm yibin.gong
@ 2019-06-10  8:17 ` yibin.gong
  2019-07-17  6:42   ` Shawn Guo
  2019-06-10  8:17 ` [PATCH v5 13/15] ARM: dts: imx6sll: correct sdma compatible yibin.gong
                   ` (3 subsequent siblings)
  15 siblings, 1 reply; 38+ messages in thread
From: yibin.gong @ 2019-06-10  8:17 UTC (permalink / raw)
  To: robh+dt, mark.rutland, shawnguo, s.hauer, kernel, broonie,
	festevam, vkoul, dan.j.williams, u.kleine-koenig,
	catalin.marinas, l.stach, will.deacon
  Cc: linux-spi, linux-imx, linux-arm-kernel, linux-kernel, dmaengine,
	devicetree

From: Robin Gong <yibin.gong@nxp.com>

Add dma support on ecspi.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 arch/arm/boot/dts/imx6ul.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index fc388b8..4a34316 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -227,6 +227,8 @@
 					clocks = <&clks IMX6UL_CLK_ECSPI1>,
 						 <&clks IMX6UL_CLK_ECSPI1>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
@@ -239,6 +241,8 @@
 					clocks = <&clks IMX6UL_CLK_ECSPI2>,
 						 <&clks IMX6UL_CLK_ECSPI2>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
@@ -251,6 +255,8 @@
 					clocks = <&clks IMX6UL_CLK_ECSPI3>,
 						 <&clks IMX6UL_CLK_ECSPI3>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
@@ -263,6 +269,8 @@
 					clocks = <&clks IMX6UL_CLK_ECSPI4>,
 						 <&clks IMX6UL_CLK_ECSPI4>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH v5 13/15] ARM: dts: imx6sll: correct sdma compatible
  2019-06-10  8:17 [PATCH v5 00/15] add ecspi ERR009165 for i.mx6/7 soc family yibin.gong
                   ` (11 preceding siblings ...)
  2019-06-10  8:17 ` [PATCH v5 12/15] ARM: dts: imx6ul: add dma support on ecspi yibin.gong
@ 2019-06-10  8:17 ` yibin.gong
  2019-07-17  6:42   ` Shawn Guo
  2019-06-10  8:17 ` [PATCH v5 14/15] arm64: defconfig: Enable SDMA on i.mx8mq/8mm yibin.gong
                   ` (2 subsequent siblings)
  15 siblings, 1 reply; 38+ messages in thread
From: yibin.gong @ 2019-06-10  8:17 UTC (permalink / raw)
  To: robh+dt, mark.rutland, shawnguo, s.hauer, kernel, broonie,
	festevam, vkoul, dan.j.williams, u.kleine-koenig,
	catalin.marinas, l.stach, will.deacon
  Cc: linux-spi, linux-imx, linux-arm-kernel, linux-kernel, dmaengine,
	devicetree

From: Robin Gong <yibin.gong@nxp.com>

Correct sdma compatible since ecspi errata ERR009165 has been fixed
on i.mx6sll as i.mx6ul.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 arch/arm/boot/dts/imx6sll.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi
index 1b4899f..d810e10 100644
--- a/arch/arm/boot/dts/imx6sll.dtsi
+++ b/arch/arm/boot/dts/imx6sll.dtsi
@@ -619,7 +619,7 @@
 			};
 
 			sdma: dma-controller@20ec000 {
-				compatible = "fsl,imx6sll-sdma", "fsl,imx35-sdma";
+				compatible = "fsl,imx6sll-sdma", "fsl,imx6ul-sdma";
 				reg = <0x020ec000 0x4000>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SLL_CLK_IPG>,
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH v5 14/15]  arm64: defconfig: Enable SDMA on i.mx8mq/8mm
  2019-06-10  8:17 [PATCH v5 00/15] add ecspi ERR009165 for i.mx6/7 soc family yibin.gong
                   ` (12 preceding siblings ...)
  2019-06-10  8:17 ` [PATCH v5 13/15] ARM: dts: imx6sll: correct sdma compatible yibin.gong
@ 2019-06-10  8:17 ` yibin.gong
  2019-07-17  6:48   ` Shawn Guo
  2019-06-10  8:17 ` [PATCH v5 15/15] dmaengine: imx-sdma: add uart rom script yibin.gong
  2019-06-21  8:42 ` [PATCH v5 00/15] add ecspi ERR009165 for i.mx6/7 soc family Robin Gong
  15 siblings, 1 reply; 38+ messages in thread
From: yibin.gong @ 2019-06-10  8:17 UTC (permalink / raw)
  To: robh+dt, mark.rutland, shawnguo, s.hauer, kernel, broonie,
	festevam, vkoul, dan.j.williams, u.kleine-koenig,
	catalin.marinas, l.stach, will.deacon
  Cc: linux-spi, linux-imx, linux-arm-kernel, linux-kernel, dmaengine,
	devicetree

From: Robin Gong <yibin.gong@nxp.com>

Enable SDMA support on i.mx8mq/8mm chips, including enabling
CONFIG_FW_LOADER_USER_HELPER/CONFIG_FW_LOADER_USER_HELPER_FALLBACK
for firmware loaded by udev.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 arch/arm64/configs/defconfig | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index bb0705e..e8aabc52 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -195,6 +195,8 @@ CONFIG_PCIE_HISI_STB=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_FW_LOADER_USER_HELPER=y
+CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
 CONFIG_HISILICON_LPC=y
 CONFIG_SIMPLE_PM_BUS=y
 CONFIG_MTD=y
@@ -627,6 +629,7 @@ CONFIG_RTC_DRV_XGENE=y
 CONFIG_DMADEVICES=y
 CONFIG_FSL_EDMA=y
 CONFIG_DMA_BCM2835=m
+CONFIG_IMX_SDMA=y
 CONFIG_K3_DMA=y
 CONFIG_MV_XOR=y
 CONFIG_MV_XOR_V2=y
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH v5 15/15] dmaengine: imx-sdma: add uart rom script
  2019-06-10  8:17 [PATCH v5 00/15] add ecspi ERR009165 for i.mx6/7 soc family yibin.gong
                   ` (13 preceding siblings ...)
  2019-06-10  8:17 ` [PATCH v5 14/15] arm64: defconfig: Enable SDMA on i.mx8mq/8mm yibin.gong
@ 2019-06-10  8:17 ` yibin.gong
  2019-06-10 12:55   ` Vinod Koul
  2019-06-21  8:42 ` [PATCH v5 00/15] add ecspi ERR009165 for i.mx6/7 soc family Robin Gong
  15 siblings, 1 reply; 38+ messages in thread
From: yibin.gong @ 2019-06-10  8:17 UTC (permalink / raw)
  To: robh+dt, mark.rutland, shawnguo, s.hauer, kernel, broonie,
	festevam, vkoul, dan.j.williams, u.kleine-koenig,
	catalin.marinas, l.stach, will.deacon
  Cc: linux-spi, linux-imx, linux-arm-kernel, linux-kernel, dmaengine,
	devicetree

From: Robin Gong <yibin.gong@nxp.com>

For the compatibility of NXP internal legacy kernel before 4.19 which
is based on uart ram script and upstreaming kernel based on uart rom
script, add both uart ram/rom script in latest sdma firmware. By default
uart rom script used.
Besides, add two multi-fifo scripts for SAI/PDM on i.mx8m/8mm and add
back qspi script miss for v4(i.mx7d/8m/8mm family, but v3 is for i.mx6).

rom script:
	uart_2_mcu_addr
	uartsh_2_mcu_addr /* through spba bus */
ram script:
	uart_2_mcu_ram_addr
	uartsh_2_mcu_ram_addr /* through spba bus */

Please get latest sdma firmware from the below and put them into the path
(/lib/firmware/imx/sdma/):
https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
/tree/imx/sdma

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 drivers/dma/imx-sdma.c                     |  4 ++--
 include/linux/platform_data/dma-imx-sdma.h | 10 ++++++++--
 2 files changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index f7c150d..deea9aa 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -1733,8 +1733,8 @@ static void sdma_issue_pending(struct dma_chan *chan)
 
 #define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1	34
 #define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V2	38
-#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3	41
-#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V4	42
+#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3	45
+#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V4	46
 
 static void sdma_add_scripts(struct sdma_engine *sdma,
 		const struct sdma_script_start_addrs *addr)
diff --git a/include/linux/platform_data/dma-imx-sdma.h b/include/linux/platform_data/dma-imx-sdma.h
index f794fee..e12d2e8 100644
--- a/include/linux/platform_data/dma-imx-sdma.h
+++ b/include/linux/platform_data/dma-imx-sdma.h
@@ -20,12 +20,12 @@ struct sdma_script_start_addrs {
 	s32 per_2_firi_addr;
 	s32 mcu_2_firi_addr;
 	s32 uart_2_per_addr;
-	s32 uart_2_mcu_addr;
+	s32 uart_2_mcu_ram_addr;
 	s32 per_2_app_addr;
 	s32 mcu_2_app_addr;
 	s32 per_2_per_addr;
 	s32 uartsh_2_per_addr;
-	s32 uartsh_2_mcu_addr;
+	s32 uartsh_2_mcu_ram_addr;
 	s32 per_2_shp_addr;
 	s32 mcu_2_shp_addr;
 	s32 ata_2_mcu_addr;
@@ -52,7 +52,13 @@ struct sdma_script_start_addrs {
 	s32 zcanfd_2_mcu_addr;
 	s32 zqspi_2_mcu_addr;
 	s32 mcu_2_ecspi_addr;
+	s32 mcu_2_sai_addr;
+	s32 sai_2_mcu_addr;
+	s32 uart_2_mcu_addr;
+	s32 uartsh_2_mcu_addr;
 	/* End of v3 array */
+	s32 mcu_2_zqspi_addr;
+	/* End of v4 array */
 };
 
 /**
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* Re: [PATCH v5 15/15] dmaengine: imx-sdma: add uart rom script
  2019-06-10  8:17 ` [PATCH v5 15/15] dmaengine: imx-sdma: add uart rom script yibin.gong
@ 2019-06-10 12:55   ` Vinod Koul
  2019-06-11  3:04     ` Robin Gong
  0 siblings, 1 reply; 38+ messages in thread
From: Vinod Koul @ 2019-06-10 12:55 UTC (permalink / raw)
  To: yibin.gong
  Cc: robh+dt, mark.rutland, shawnguo, s.hauer, kernel, broonie,
	festevam, dan.j.williams, u.kleine-koenig, catalin.marinas,
	l.stach, will.deacon, linux-spi, linux-imx, linux-arm-kernel,
	linux-kernel, dmaengine, devicetree

On 10-06-19, 16:17, yibin.gong@nxp.com wrote:
> From: Robin Gong <yibin.gong@nxp.com>
> 
> For the compatibility of NXP internal legacy kernel before 4.19 which
> is based on uart ram script and upstreaming kernel based on uart rom
> script, add both uart ram/rom script in latest sdma firmware. By default
> uart rom script used.
> Besides, add two multi-fifo scripts for SAI/PDM on i.mx8m/8mm and add
> back qspi script miss for v4(i.mx7d/8m/8mm family, but v3 is for i.mx6).
> 
> rom script:
> 	uart_2_mcu_addr
> 	uartsh_2_mcu_addr /* through spba bus */
> ram script:
> 	uart_2_mcu_ram_addr
> 	uartsh_2_mcu_ram_addr /* through spba bus */
> 
> Please get latest sdma firmware from the below and put them into the path
> (/lib/firmware/imx/sdma/):
> https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
> /tree/imx/sdma

How does this work with folks have older firmware?

> 
> Signed-off-by: Robin Gong <yibin.gong@nxp.com>
> ---
>  drivers/dma/imx-sdma.c                     |  4 ++--
>  include/linux/platform_data/dma-imx-sdma.h | 10 ++++++++--
>  2 files changed, 10 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
> index f7c150d..deea9aa 100644
> --- a/drivers/dma/imx-sdma.c
> +++ b/drivers/dma/imx-sdma.c
> @@ -1733,8 +1733,8 @@ static void sdma_issue_pending(struct dma_chan *chan)
>  
>  #define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1	34
>  #define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V2	38
> -#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3	41
> -#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V4	42
> +#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3	45
> +#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V4	46
>  
>  static void sdma_add_scripts(struct sdma_engine *sdma,
>  		const struct sdma_script_start_addrs *addr)
> diff --git a/include/linux/platform_data/dma-imx-sdma.h b/include/linux/platform_data/dma-imx-sdma.h
> index f794fee..e12d2e8 100644
> --- a/include/linux/platform_data/dma-imx-sdma.h
> +++ b/include/linux/platform_data/dma-imx-sdma.h
> @@ -20,12 +20,12 @@ struct sdma_script_start_addrs {
>  	s32 per_2_firi_addr;
>  	s32 mcu_2_firi_addr;
>  	s32 uart_2_per_addr;
> -	s32 uart_2_mcu_addr;
> +	s32 uart_2_mcu_ram_addr;
>  	s32 per_2_app_addr;
>  	s32 mcu_2_app_addr;
>  	s32 per_2_per_addr;
>  	s32 uartsh_2_per_addr;
> -	s32 uartsh_2_mcu_addr;
> +	s32 uartsh_2_mcu_ram_addr;
>  	s32 per_2_shp_addr;
>  	s32 mcu_2_shp_addr;
>  	s32 ata_2_mcu_addr;
> @@ -52,7 +52,13 @@ struct sdma_script_start_addrs {
>  	s32 zcanfd_2_mcu_addr;
>  	s32 zqspi_2_mcu_addr;
>  	s32 mcu_2_ecspi_addr;
> +	s32 mcu_2_sai_addr;
> +	s32 sai_2_mcu_addr;
> +	s32 uart_2_mcu_addr;
> +	s32 uartsh_2_mcu_addr;
>  	/* End of v3 array */
> +	s32 mcu_2_zqspi_addr;
> +	/* End of v4 array */
>  };
>  
>  /**
> -- 
> 2.7.4

-- 
~Vinod

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [PATCH v5 15/15] dmaengine: imx-sdma: add uart rom script
  2019-06-10 12:55   ` Vinod Koul
@ 2019-06-11  3:04     ` Robin Gong
  2019-06-11  4:37       ` Vinod Koul
  0 siblings, 1 reply; 38+ messages in thread
From: Robin Gong @ 2019-06-11  3:04 UTC (permalink / raw)
  To: vkoul
  Cc: dl-linux-imx, linux-kernel, robh+dt, u.kleine-koenig, devicetree,
	festevam, dan.j.williams, broonie, mark.rutland, dmaengine,
	catalin.marinas, will.deacon, shawnguo, linux-arm-kernel,
	linux-spi, l.stach, kernel, s.hauer

On 2019-06-10 at 12:55 +0000, Vinod Koul wrote:
> On 10-06-19, 16:17, yibin.gong@nxp.com wrote:
> > 
> > From: Robin Gong <yibin.gong@nxp.com>
> > 
> > For the compatibility of NXP internal legacy kernel before 4.19
> > which
> > is based on uart ram script and upstreaming kernel based on uart
> > rom
> > script, add both uart ram/rom script in latest sdma firmware. By
> > default
> > uart rom script used.
> > Besides, add two multi-fifo scripts for SAI/PDM on i.mx8m/8mm and
> > add
> > back qspi script miss for v4(i.mx7d/8m/8mm family, but v3 is for
> > i.mx6).
> > 
> > rom script:
> > 	uart_2_mcu_addr
> > 	uartsh_2_mcu_addr /* through spba bus */
> > ram script:
> > 	uart_2_mcu_ram_addr
> > 	uartsh_2_mcu_ram_addr /* through spba bus */
> > 
> > Please get latest sdma firmware from the below and put them into
> > the path
> > (/lib/firmware/imx/sdma/):
> > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fg
> > it.kernel.org%2Fpub%2Fscm%2Flinux%2Fkernel%2Fgit%2Ffirmware%2Flinux
> > -firmware.git&amp;data=02%7C01%7Cyibin.gong%40nxp.com%7C6a7833e8a09
> > 344d9951e08d6eda35fc5%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C
> > 636957683278190279&amp;sdata=RHeypEOREiPGmKveg6gYPy%2FMg8Dzz4JpcHsm
> > %2Bbdxlzo%3D&amp;reserved=0
> > /tree/imx/sdma
> How does this work with folks have older firmware?
The older SDMA RAM script(firmware) will break the uart driver of
upstreaming kernel for these years, this is why Lucas raise uart driver
patch (commit 905c0decad28) to use ROM script instead. There are two
ways to fix uart issue: one is checking 'Idle Condition
Detection'/'Aging timer' in RAM script and enable 'IDLE' in uart
driver, another is only checking 'Aging timer' in ROM script and
adjusting RX FIFO burst length one word less to ensure at least one
word left forever in RX FIFO which is the trigger requirement of 'Aging
timer'(So no need 'IDLE', 'Aging time' is enough) . FSL/NXP internal
kernel go with the first option, while upstreaming kernel go with the
second. Since Lucas's patch assume ROM script used in kernel and
disable 'IDLE', upstreaming kernel broken in uart driver with older
firmware for these years. So this patch is just for fix this
compatibility issue with the ram script(older firmware) updated in
linux-firmware(done already.), thus both RAM script and ROM script can
work in kernel. Besides, kernel with the latest RAM firmware and this
patch set can workaround ecspi issue without any function break which
Lucas concerned about.
> 
> > 
> > 
> > Signed-off-by: Robin Gong <yibin.gong@nxp.com>
> > ---
> >  drivers/dma/imx-sdma.c                     |  4 ++--
> >  include/linux/platform_data/dma-imx-sdma.h | 10 ++++++++--
> >  2 files changed, 10 insertions(+), 4 deletions(-)
> > 
> > diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
> > index f7c150d..deea9aa 100644
> > --- a/drivers/dma/imx-sdma.c
> > +++ b/drivers/dma/imx-sdma.c
> > @@ -1733,8 +1733,8 @@ static void sdma_issue_pending(struct
> > dma_chan *chan)
> >  
> >  #define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1	34
> >  #define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V2	38
> > -#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3	41
> > -#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V4	42
> > +#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3	45
> > +#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V4	46
> >  
> >  static void sdma_add_scripts(struct sdma_engine *sdma,
> >  		const struct sdma_script_start_addrs *addr)
> > diff --git a/include/linux/platform_data/dma-imx-sdma.h
> > b/include/linux/platform_data/dma-imx-sdma.h
> > index f794fee..e12d2e8 100644
> > --- a/include/linux/platform_data/dma-imx-sdma.h
> > +++ b/include/linux/platform_data/dma-imx-sdma.h
> > @@ -20,12 +20,12 @@ struct sdma_script_start_addrs {
> >  	s32 per_2_firi_addr;
> >  	s32 mcu_2_firi_addr;
> >  	s32 uart_2_per_addr;
> > -	s32 uart_2_mcu_addr;
> > +	s32 uart_2_mcu_ram_addr;
> >  	s32 per_2_app_addr;
> >  	s32 mcu_2_app_addr;
> >  	s32 per_2_per_addr;
> >  	s32 uartsh_2_per_addr;
> > -	s32 uartsh_2_mcu_addr;
> > +	s32 uartsh_2_mcu_ram_addr;
> >  	s32 per_2_shp_addr;
> >  	s32 mcu_2_shp_addr;
> >  	s32 ata_2_mcu_addr;
> > @@ -52,7 +52,13 @@ struct sdma_script_start_addrs {
> >  	s32 zcanfd_2_mcu_addr;
> >  	s32 zqspi_2_mcu_addr;
> >  	s32 mcu_2_ecspi_addr;
> > +	s32 mcu_2_sai_addr;
> > +	s32 sai_2_mcu_addr;
> > +	s32 uart_2_mcu_addr;
> > +	s32 uartsh_2_mcu_addr;
> >  	/* End of v3 array */
> > +	s32 mcu_2_zqspi_addr;
> > +	/* End of v4 array */
> >  };
> >  
> >  /**
> > -- 
> > 2.7.4

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [PATCH v5 15/15] dmaengine: imx-sdma: add uart rom script
  2019-06-11  3:04     ` Robin Gong
@ 2019-06-11  4:37       ` Vinod Koul
  0 siblings, 0 replies; 38+ messages in thread
From: Vinod Koul @ 2019-06-11  4:37 UTC (permalink / raw)
  To: Robin Gong
  Cc: dl-linux-imx, linux-kernel, robh+dt, u.kleine-koenig, devicetree,
	festevam, dan.j.williams, broonie, mark.rutland, dmaengine,
	catalin.marinas, will.deacon, shawnguo, linux-arm-kernel,
	linux-spi, l.stach, kernel, s.hauer

On 11-06-19, 03:04, Robin Gong wrote:
> On 2019-06-10 at 12:55 +0000, Vinod Koul wrote:
> > On 10-06-19, 16:17, yibin.gong@nxp.com wrote:
> > > 
> > > From: Robin Gong <yibin.gong@nxp.com>
> > > 
> > > For the compatibility of NXP internal legacy kernel before 4.19
> > > which
> > > is based on uart ram script and upstreaming kernel based on uart
> > > rom
> > > script, add both uart ram/rom script in latest sdma firmware. By
> > > default
> > > uart rom script used.
> > > Besides, add two multi-fifo scripts for SAI/PDM on i.mx8m/8mm and
> > > add
> > > back qspi script miss for v4(i.mx7d/8m/8mm family, but v3 is for
> > > i.mx6).
> > > 
> > > rom script:
> > > 	uart_2_mcu_addr
> > > 	uartsh_2_mcu_addr /* through spba bus */
> > > ram script:
> > > 	uart_2_mcu_ram_addr
> > > 	uartsh_2_mcu_ram_addr /* through spba bus */
> > > 
> > > Please get latest sdma firmware from the below and put them into
> > > the path
> > > (/lib/firmware/imx/sdma/):
> > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fg
> > > it.kernel.org%2Fpub%2Fscm%2Flinux%2Fkernel%2Fgit%2Ffirmware%2Flinux
> > > -firmware.git&amp;data=02%7C01%7Cyibin.gong%40nxp.com%7C6a7833e8a09
> > > 344d9951e08d6eda35fc5%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C
> > > 636957683278190279&amp;sdata=RHeypEOREiPGmKveg6gYPy%2FMg8Dzz4JpcHsm
> > > %2Bbdxlzo%3D&amp;reserved=0
> > > /tree/imx/sdma
> > How does this work with folks have older firmware?
> The older SDMA RAM script(firmware) will break the uart driver of
> upstreaming kernel for these years, this is why Lucas raise uart driver
> patch (commit 905c0decad28) to use ROM script instead. There are two
> ways to fix uart issue: one is checking 'Idle Condition
> Detection'/'Aging timer' in RAM script and enable 'IDLE' in uart
> driver, another is only checking 'Aging timer' in ROM script and
> adjusting RX FIFO burst length one word less to ensure at least one
> word left forever in RX FIFO which is the trigger requirement of 'Aging
> timer'(So no need 'IDLE', 'Aging time' is enough) . FSL/NXP internal
> kernel go with the first option, while upstreaming kernel go with the
> second. Since Lucas's patch assume ROM script used in kernel and
> disable 'IDLE', upstreaming kernel broken in uart driver with older
> firmware for these years. So this patch is just for fix this
> compatibility issue with the ram script(older firmware) updated in
> linux-firmware(done already.), thus both RAM script and ROM script can
> work in kernel. Besides, kernel with the latest RAM firmware and this
> patch set can workaround ecspi issue without any function break which
> Lucas concerned about.

Acked-by: Vinod Koul <vkoul@kernel.org>

-- 
~Vinod

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [PATCH v5 10/15] dma: imx-sdma: add i.mx6ul/6sx compatible name
  2019-06-10  8:17 ` [PATCH v5 10/15] dma: imx-sdma: add i.mx6ul/6sx compatible name yibin.gong
@ 2019-06-11 22:35   ` Rob Herring
  2019-06-12  2:32     ` Robin Gong
  0 siblings, 1 reply; 38+ messages in thread
From: Rob Herring @ 2019-06-11 22:35 UTC (permalink / raw)
  To: yibin.gong
  Cc: robh+dt, mark.rutland, shawnguo, s.hauer, kernel, broonie,
	festevam, vkoul, dan.j.williams, u.kleine-koenig,
	catalin.marinas, l.stach, will.deacon, linux-spi, linux-imx,
	linux-arm-kernel, linux-kernel, dmaengine, devicetree

On Mon, 10 Jun 2019 16:17:48 +0800, yibin.gong@nxp.com wrote:
> From: Robin Gong <yibin.gong@nxp.com>
> 
> Add i.mx6ul and i.mx6sx compatible name in binding doc.
> 
> Signed-off-by: Robin Gong <yibin.gong@nxp.com>
> ---
>  Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt | 2 ++
>  1 file changed, 2 insertions(+)
> 

Please add Acked-by/Reviewed-by tags when posting new versions. However,
there's no need to repost patches *only* to add the tags. The upstream
maintainer will do that for acks received on the version they apply.

If a tag was not added on purpose, please state why and what changed.

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [PATCH v5 10/15] dma: imx-sdma: add i.mx6ul/6sx compatible name
  2019-06-11 22:35   ` Rob Herring
@ 2019-06-12  2:32     ` Robin Gong
  0 siblings, 0 replies; 38+ messages in thread
From: Robin Gong @ 2019-06-12  2:32 UTC (permalink / raw)
  To: robh
  Cc: dl-linux-imx, linux-kernel, robh+dt, u.kleine-koenig, devicetree,
	festevam, broonie, dan.j.williams, mark.rutland, dmaengine,
	catalin.marinas, will.deacon, shawnguo, linux-arm-kernel, vkoul,
	l.stach, kernel, linux-spi, s.hauer

On 2019-06-11 at 22:35 +0000, Rob Herring wrote:
> On Mon, 10 Jun 2019 16:17:48 +0800, yibin.gong@nxp.com wrote:
> > 
> > From: Robin Gong <yibin.gong@nxp.com>
> > 
> > Add i.mx6ul and i.mx6sx compatible name in binding doc.
> > 
> > Signed-off-by: Robin Gong <yibin.gong@nxp.com>
> > ---
> >  Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt | 2 ++
> >  1 file changed, 2 insertions(+)
> > 
> Please add Acked-by/Reviewed-by tags when posting new versions.
> However,
> there's no need to repost patches *only* to add the tags. The
> upstream
> maintainer will do that for acks received on the version they apply.
> 

> If a tag was not added on purpose, please state why and what changed.
Sorry Rob...I miss your mail with 'Reviewed-by' in v2 because it slip
into 'unk Email' folder. Will add your tag in v6 if comments received
from v5

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [PATCH v5 00/15] add ecspi ERR009165 for i.mx6/7 soc family
  2019-06-10  8:17 [PATCH v5 00/15] add ecspi ERR009165 for i.mx6/7 soc family yibin.gong
                   ` (14 preceding siblings ...)
  2019-06-10  8:17 ` [PATCH v5 15/15] dmaengine: imx-sdma: add uart rom script yibin.gong
@ 2019-06-21  8:42 ` Robin Gong
  2019-06-24  0:16   ` Shawn Guo
  15 siblings, 1 reply; 38+ messages in thread
From: Robin Gong @ 2019-06-21  8:42 UTC (permalink / raw)
  To: robh+dt, u.kleine-koenig, festevam, broonie, dan.j.williams,
	mark.rutland, catalin.marinas, will.deacon, shawnguo, vkoul,
	l.stach, kernel, s.hauer
  Cc: linux-spi, linux-arm-kernel, linux-kernel, dl-linux-imx,
	dmaengine, devicetree

Hello Shawn/Will,
  Do you have comments for this V5 patch set? I got tags from Mark,
Vinod and Rob.

On 2019-06-10 at 08:17 +0000, yibin.gong@nxp.com wrote:
> From: Robin Gong <yibin.gong@nxp.com>
> 
>   There is ecspi ERR009165 on i.mx6/7 soc family, which cause FIFO
> transfer to be send twice in DMA mode. Please get more information
> from:
> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww
> .nxp.com%2Fdocs%2Fen%2Ferrata%2FIMX6DQCE.pdf&amp;data=02%7C01%7Cyibin
> .gong%40nxp.com%7C67d3e78fe5ef4428b3af08d6ed7beb74%7C686ea1d3bc2b4c6f
> a92cd99c5c301635%7C0%7C1%7C636957513814970412&amp;sdata=%2F9sbrDEmIpu
> OazcIAVpIrELZMEjO94%2Bjen7wOOlVsVk%3D&amp;reserved=0. The workaround
> is adding
> new sdma ram script which works in XCH  mode as PIO inside sdma
> instead
> of SMC mode, meanwhile, 'TX_THRESHOLD' should be 0. The issue should
> be
> exist on all legacy i.mx6/7 soc family before i.mx6ul.
>   NXP fix this design issue from i.mx6ul, so newer chips including
> i.mx6ul/
> 6ull/6sll do not need this workaroud anymore. All other i.mx6/7/8
> chips
> still need this workaroud. This patch set add new 'fsl,imx6ul-ecspi'
> for ecspi driver and 'ecspi_fixed' in sdma driver to choose if need
> errata
> or not.
>   The first two reverted patches should be the same issue, though, it
> seems 'fixed' by changing to other shp script. Hope Sean or Sascha
> could
> have the chance to test this patch set if could fix their issues.
>   Besides, enable sdma support for i.mx8mm/8mq and fix ecspi1 not
> work
> on i.mx8mm because the event id is zero.
> 
> PS:
>    Please get sdma firmware from below linux-firmware and copy it to
> your
> local rootfs /lib/firmware/imx/sdma.
> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgit
> .kernel.org%2Fpub%2Fscm%2Flinux%2Fkernel%2Fgit%2Ffirmware%2Flinux-
> firmware.git%2Ftree%2Fimx%2Fsdma&amp;data=02%7C01%7Cyibin.gong%40nxp.
> com%7C67d3e78fe5ef4428b3af08d6ed7beb74%7C686ea1d3bc2b4c6fa92cd99c5c30
> 1635%7C0%7C1%7C636957513814970412&amp;sdata=xXHBWpSaSLmMosb%2FajOAiXn
> nkxaYV6HCt25OOzgRLbI%3D&amp;reserved=0
> 
> v2:
>   1.Add commit log for reverted patches.
>   2.Add comment for 'ecspi_fixed' in sdma driver.
>   3.Add 'fsl,imx6sll-ecspi' compatible instead of 'fsl,imx6ul-ecspi'
>     rather than remove.
> v3:
>   1.Confirm with design team make sure ERR009165 fixed on
> i.mx6ul/i.mx6ull
>     /i.mx6sll, not fixed on i.mx8m/8mm and other i.mx6/7 legacy
> chips.
>     Correct dts related dts patch in v2.
>   2.Clean eratta information in binding doc and new 'tx_glitch_fixed'
> flag
>     in spi-imx driver to state ERR009165 fixed or not.
>   3.Enlarge burst size to fifo size for tx since tx_wml set to 0 in
> the
>     errata workaroud, thus improve performance as possible.
> v4:
>   1.add Ack tag from Mark and Vinod
>   2. remove checking 'event_id1' zero as 'event_id0'.
> v5:
>   1.Add another patch for compatible with the current uart driver
> which
>     using rom script, so both uart ram script and rom script
> supported
>     in latest firmware, by default uart rom script used. UART driver
>     will be broken without this patch. Latest sdma firmware has been
>     already updated in linux-firmware. 
> 
> Robin Gong (15):
>   Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"
>   Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"
>   Revert "dmaengine: imx-sdma: refine to load context only once"
>   dmaengine: imx-sdma: remove dupilicated sdma_load_context
>   dmaengine: imx-sdma: add mcu_2_ecspi script
>   spi: imx: fix ERR009165
>   spi: imx: remove ERR009165 workaround on i.mx6ul
>   spi: imx: add new i.mx6ul compatible name in binding doc
>   dmaengine: imx-sdma: remove ERR009165 on i.mx6ul
>   dma: imx-sdma: add i.mx6ul/6sx compatible name
>   dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm
>   ARM: dts: imx6ul: add dma support on ecspi
>   ARM: dts: imx6sll: correct sdma compatible
>   arm64: defconfig: Enable SDMA on i.mx8mq/8mm
>   dmaengine: imx-sdma: add uart rom script
> 
>  .../devicetree/bindings/dma/fsl-imx-sdma.txt       |  2 +
>  .../devicetree/bindings/spi/fsl-imx-cspi.txt       |  1 +
>  arch/arm/boot/dts/imx6q.dtsi                       |  2 +-
>  arch/arm/boot/dts/imx6qdl.dtsi                     |  8 +-
>  arch/arm/boot/dts/imx6sll.dtsi                     |  2 +-
>  arch/arm/boot/dts/imx6ul.dtsi                      |  8 ++
>  arch/arm64/configs/defconfig                       |  3 +
>  drivers/dma/imx-sdma.c                             | 88
> ++++++++++++++++------
>  drivers/spi/spi-imx.c                              | 61
> ++++++++++++---
>  include/linux/platform_data/dma-imx-sdma.h         | 11 ++-
>  10 files changed, 145 insertions(+), 41 deletions(-)
> 

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [PATCH v5 00/15] add ecspi ERR009165 for i.mx6/7 soc family
  2019-06-21  8:42 ` [PATCH v5 00/15] add ecspi ERR009165 for i.mx6/7 soc family Robin Gong
@ 2019-06-24  0:16   ` Shawn Guo
  2019-06-25  8:05     ` Robin Gong
  0 siblings, 1 reply; 38+ messages in thread
From: Shawn Guo @ 2019-06-24  0:16 UTC (permalink / raw)
  To: Robin Gong
  Cc: robh+dt, u.kleine-koenig, festevam, broonie, dan.j.williams,
	mark.rutland, catalin.marinas, will.deacon, vkoul, l.stach,
	kernel, s.hauer, linux-spi, linux-arm-kernel, linux-kernel,
	dl-linux-imx, dmaengine, devicetree

On Fri, Jun 21, 2019 at 08:42:48AM +0000, Robin Gong wrote:
> Hello Shawn/Will,
>   Do you have comments for this V5 patch set? I got tags from Mark,
> Vinod and Rob.

I'm fine with the DTS change, but not sure how the series should be
merged.

Shawn

> 
> On 2019-06-10 at 08:17 +0000, yibin.gong@nxp.com wrote:
> > From: Robin Gong <yibin.gong@nxp.com>
> > 
> >   There is ecspi ERR009165 on i.mx6/7 soc family, which cause FIFO
> > transfer to be send twice in DMA mode. Please get more information
> > from:
> > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww
> > .nxp.com%2Fdocs%2Fen%2Ferrata%2FIMX6DQCE.pdf&amp;data=02%7C01%7Cyibin
> > .gong%40nxp.com%7C67d3e78fe5ef4428b3af08d6ed7beb74%7C686ea1d3bc2b4c6f
> > a92cd99c5c301635%7C0%7C1%7C636957513814970412&amp;sdata=%2F9sbrDEmIpu
> > OazcIAVpIrELZMEjO94%2Bjen7wOOlVsVk%3D&amp;reserved=0. The workaround
> > is adding
> > new sdma ram script which works in XCH  mode as PIO inside sdma
> > instead
> > of SMC mode, meanwhile, 'TX_THRESHOLD' should be 0. The issue should
> > be
> > exist on all legacy i.mx6/7 soc family before i.mx6ul.
> >   NXP fix this design issue from i.mx6ul, so newer chips including
> > i.mx6ul/
> > 6ull/6sll do not need this workaroud anymore. All other i.mx6/7/8
> > chips
> > still need this workaroud. This patch set add new 'fsl,imx6ul-ecspi'
> > for ecspi driver and 'ecspi_fixed' in sdma driver to choose if need
> > errata
> > or not.
> >   The first two reverted patches should be the same issue, though, it
> > seems 'fixed' by changing to other shp script. Hope Sean or Sascha
> > could
> > have the chance to test this patch set if could fix their issues.
> >   Besides, enable sdma support for i.mx8mm/8mq and fix ecspi1 not
> > work
> > on i.mx8mm because the event id is zero.
> > 
> > PS:
> >    Please get sdma firmware from below linux-firmware and copy it to
> > your
> > local rootfs /lib/firmware/imx/sdma.
> > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgit
> > .kernel.org%2Fpub%2Fscm%2Flinux%2Fkernel%2Fgit%2Ffirmware%2Flinux-
> > firmware.git%2Ftree%2Fimx%2Fsdma&amp;data=02%7C01%7Cyibin.gong%40nxp.
> > com%7C67d3e78fe5ef4428b3af08d6ed7beb74%7C686ea1d3bc2b4c6fa92cd99c5c30
> > 1635%7C0%7C1%7C636957513814970412&amp;sdata=xXHBWpSaSLmMosb%2FajOAiXn
> > nkxaYV6HCt25OOzgRLbI%3D&amp;reserved=0
> > 
> > v2:
> >   1.Add commit log for reverted patches.
> >   2.Add comment for 'ecspi_fixed' in sdma driver.
> >   3.Add 'fsl,imx6sll-ecspi' compatible instead of 'fsl,imx6ul-ecspi'
> >     rather than remove.
> > v3:
> >   1.Confirm with design team make sure ERR009165 fixed on
> > i.mx6ul/i.mx6ull
> >     /i.mx6sll, not fixed on i.mx8m/8mm and other i.mx6/7 legacy
> > chips.
> >     Correct dts related dts patch in v2.
> >   2.Clean eratta information in binding doc and new 'tx_glitch_fixed'
> > flag
> >     in spi-imx driver to state ERR009165 fixed or not.
> >   3.Enlarge burst size to fifo size for tx since tx_wml set to 0 in
> > the
> >     errata workaroud, thus improve performance as possible.
> > v4:
> >   1.add Ack tag from Mark and Vinod
> >   2. remove checking 'event_id1' zero as 'event_id0'.
> > v5:
> >   1.Add another patch for compatible with the current uart driver
> > which
> >     using rom script, so both uart ram script and rom script
> > supported
> >     in latest firmware, by default uart rom script used. UART driver
> >     will be broken without this patch. Latest sdma firmware has been
> >     already updated in linux-firmware. 
> > 
> > Robin Gong (15):
> >   Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"
> >   Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"
> >   Revert "dmaengine: imx-sdma: refine to load context only once"
> >   dmaengine: imx-sdma: remove dupilicated sdma_load_context
> >   dmaengine: imx-sdma: add mcu_2_ecspi script
> >   spi: imx: fix ERR009165
> >   spi: imx: remove ERR009165 workaround on i.mx6ul
> >   spi: imx: add new i.mx6ul compatible name in binding doc
> >   dmaengine: imx-sdma: remove ERR009165 on i.mx6ul
> >   dma: imx-sdma: add i.mx6ul/6sx compatible name
> >   dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm
> >   ARM: dts: imx6ul: add dma support on ecspi
> >   ARM: dts: imx6sll: correct sdma compatible
> >   arm64: defconfig: Enable SDMA on i.mx8mq/8mm
> >   dmaengine: imx-sdma: add uart rom script
> > 
> >  .../devicetree/bindings/dma/fsl-imx-sdma.txt       |  2 +
> >  .../devicetree/bindings/spi/fsl-imx-cspi.txt       |  1 +
> >  arch/arm/boot/dts/imx6q.dtsi                       |  2 +-
> >  arch/arm/boot/dts/imx6qdl.dtsi                     |  8 +-
> >  arch/arm/boot/dts/imx6sll.dtsi                     |  2 +-
> >  arch/arm/boot/dts/imx6ul.dtsi                      |  8 ++
> >  arch/arm64/configs/defconfig                       |  3 +
> >  drivers/dma/imx-sdma.c                             | 88
> > ++++++++++++++++------
> >  drivers/spi/spi-imx.c                              | 61
> > ++++++++++++---
> >  include/linux/platform_data/dma-imx-sdma.h         | 11 ++-
> >  10 files changed, 145 insertions(+), 41 deletions(-)
> > 

^ permalink raw reply	[flat|nested] 38+ messages in thread

* RE: [PATCH v5 00/15] add ecspi ERR009165 for i.mx6/7 soc family
  2019-06-24  0:16   ` Shawn Guo
@ 2019-06-25  8:05     ` Robin Gong
  0 siblings, 0 replies; 38+ messages in thread
From: Robin Gong @ 2019-06-25  8:05 UTC (permalink / raw)
  To: Shawn Guo
  Cc: robh+dt, u.kleine-koenig, festevam, broonie, dan.j.williams,
	mark.rutland, catalin.marinas, will.deacon, vkoul, l.stach,
	kernel, s.hauer, linux-spi, linux-arm-kernel, linux-kernel,
	dl-linux-imx, dmaengine, devicetree

Thanks Shawn. If no comment here, I think you can merge dts patch firstly in your tree since
those dts patches are harmless, Mark and Vinod would merge SPI/DMA patches into
their trees? Hope imx/spi/dmaengin trees could merge into the same rc on linux-next, otherwise
SPI function maybe broken.
> -----Original Message-----
> From: Shawn Guo <shawnguo@kernel.org>
> Sent: 2019年6月24日 8:17
> Subject: Re: [PATCH v5 00/15] add ecspi ERR009165 for i.mx6/7 soc family
> 
> On Fri, Jun 21, 2019 at 08:42:48AM +0000, Robin Gong wrote:
> > Hello Shawn/Will,
> >   Do you have comments for this V5 patch set? I got tags from Mark,
> > Vinod and Rob.
> 
> I'm fine with the DTS change, but not sure how the series should be merged.
> 
> Shawn
> 
> >
> > On 2019-06-10 at 08:17 +0000, yibin.gong@nxp.com wrote:
> > > From: Robin Gong <yibin.gong@nxp.com>
> > >
> > >   There is ecspi ERR009165 on i.mx6/7 soc family, which cause FIFO
> > > transfer to be send twice in DMA mode. Please get more information
> > > from:
> > > https://www
> > > .nxp.com%2Fdocs%2Fen%2Ferrata%2FIMX6DQCE.pdf&amp;data=02%7C01
> %7Cyibi
> > > n
> > > .gong%40nxp.com%7C67d3e78fe5ef4428b3af08d6ed7beb74%7C686ea1d
> 3bc2b4c6
> > > f
> > >
> a92cd99c5c301635%7C0%7C1%7C636957513814970412&amp;sdata=%2F9s
> brDEmIp
> > > u OazcIAVpIrELZMEjO94%2Bjen7wOOlVsVk%3D&amp;reserved=0. The
> > > workaround is adding new sdma ram script which works in XCH  mode as
> > > PIO inside sdma instead of SMC mode, meanwhile, 'TX_THRESHOLD'
> > > should be 0. The issue should be exist on all legacy i.mx6/7 soc
> > > family before i.mx6ul.
> > >   NXP fix this design issue from i.mx6ul, so newer chips including
> > > i.mx6ul/ 6ull/6sll do not need this workaroud anymore. All other
> > > i.mx6/7/8 chips still need this workaroud. This patch set add new
> > > 'fsl,imx6ul-ecspi'
> > > for ecspi driver and 'ecspi_fixed' in sdma driver to choose if need
> > > errata or not.
> > >   The first two reverted patches should be the same issue, though,
> > > it seems 'fixed' by changing to other shp script. Hope Sean or
> > > Sascha could have the chance to test this patch set if could fix
> > > their issues.
> > >   Besides, enable sdma support for i.mx8mm/8mq and fix ecspi1 not
> > > work on i.mx8mm because the event id is zero.
> > >
> > > PS:
> > >    Please get sdma firmware from below linux-firmware and copy it to
> > > your local rootfs /lib/firmware/imx/sdma.
> > > https://git
> > > .kernel.org%2Fpub%2Fscm%2Flinux%2Fkernel%2Fgit%2Ffirmware%2Flinux-
> > >
> firmware.git%2Ftree%2Fimx%2Fsdma&amp;data=02%7C01%7Cyibin.gong%40
> nxp.
> > >
> com%7C67d3e78fe5ef4428b3af08d6ed7beb74%7C686ea1d3bc2b4c6fa92cd9
> 9c5c3
> > > 0
> > >
> 1635%7C0%7C1%7C636957513814970412&amp;sdata=xXHBWpSaSLmMosb
> %2FajOAiX
> > > n
> > > nkxaYV6HCt25OOzgRLbI%3D&amp;reserved=0
> > >
> > > v2:
> > >   1.Add commit log for reverted patches.
> > >   2.Add comment for 'ecspi_fixed' in sdma driver.
> > >   3.Add 'fsl,imx6sll-ecspi' compatible instead of 'fsl,imx6ul-ecspi'
> > >     rather than remove.
> > > v3:
> > >   1.Confirm with design team make sure ERR009165 fixed on
> > > i.mx6ul/i.mx6ull
> > >     /i.mx6sll, not fixed on i.mx8m/8mm and other i.mx6/7 legacy
> > > chips.
> > >     Correct dts related dts patch in v2.
> > >   2.Clean eratta information in binding doc and new 'tx_glitch_fixed'
> > > flag
> > >     in spi-imx driver to state ERR009165 fixed or not.
> > >   3.Enlarge burst size to fifo size for tx since tx_wml set to 0 in
> > > the
> > >     errata workaroud, thus improve performance as possible.
> > > v4:
> > >   1.add Ack tag from Mark and Vinod
> > >   2. remove checking 'event_id1' zero as 'event_id0'.
> > > v5:
> > >   1.Add another patch for compatible with the current uart driver
> > > which
> > >     using rom script, so both uart ram script and rom script
> > > supported
> > >     in latest firmware, by default uart rom script used. UART driver
> > >     will be broken without this patch. Latest sdma firmware has been
> > >     already updated in linux-firmware.
> > >
> > > Robin Gong (15):
> > >   Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"
> > >   Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"
> > >   Revert "dmaengine: imx-sdma: refine to load context only once"
> > >   dmaengine: imx-sdma: remove dupilicated sdma_load_context
> > >   dmaengine: imx-sdma: add mcu_2_ecspi script
> > >   spi: imx: fix ERR009165
> > >   spi: imx: remove ERR009165 workaround on i.mx6ul
> > >   spi: imx: add new i.mx6ul compatible name in binding doc
> > >   dmaengine: imx-sdma: remove ERR009165 on i.mx6ul
> > >   dma: imx-sdma: add i.mx6ul/6sx compatible name
> > >   dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm
> > >   ARM: dts: imx6ul: add dma support on ecspi
> > >   ARM: dts: imx6sll: correct sdma compatible
> > >   arm64: defconfig: Enable SDMA on i.mx8mq/8mm
> > >   dmaengine: imx-sdma: add uart rom script
> > >
> > >  .../devicetree/bindings/dma/fsl-imx-sdma.txt       |  2 +
> > >  .../devicetree/bindings/spi/fsl-imx-cspi.txt       |  1 +
> > >  arch/arm/boot/dts/imx6q.dtsi                       |  2 +-
> > >  arch/arm/boot/dts/imx6qdl.dtsi                     |  8 +-
> > >  arch/arm/boot/dts/imx6sll.dtsi                     |  2 +-
> > >  arch/arm/boot/dts/imx6ul.dtsi                      |  8 ++
> > >  arch/arm64/configs/defconfig                       |  3 +
> > >  drivers/dma/imx-sdma.c                             | 88
> > > ++++++++++++++++------
> > >  drivers/spi/spi-imx.c                              | 61
> > > ++++++++++++---
> > >  include/linux/platform_data/dma-imx-sdma.h         | 11 ++-
> > >  10 files changed, 145 insertions(+), 41 deletions(-)
> > >

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [PATCH v5 08/15] spi: imx: add new i.mx6ul compatible name in binding doc
  2019-06-10  8:17 ` [PATCH v5 08/15] spi: imx: add new i.mx6ul compatible name in binding doc yibin.gong
@ 2019-07-09  2:17   ` Rob Herring
  0 siblings, 0 replies; 38+ messages in thread
From: Rob Herring @ 2019-07-09  2:17 UTC (permalink / raw)
  To: yibin.gong
  Cc: robh+dt, mark.rutland, shawnguo, s.hauer, kernel, broonie,
	festevam, vkoul, dan.j.williams, u.kleine-koenig,
	catalin.marinas, l.stach, will.deacon, linux-spi, linux-imx,
	linux-arm-kernel, linux-kernel, dmaengine, devicetree

On Mon, 10 Jun 2019 16:17:46 +0800, yibin.gong@nxp.com wrote:
> From: Robin Gong <yibin.gong@nxp.com>
> 
> ERR009165 fixed from i.mx6ul, add its compatible name in binding
> doc.
> 
> Signed-off-by: Robin Gong <yibin.gong@nxp.com>
> Acked-by: Mark Brown <broonie@kernel.org>
> ---
>  Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt | 1 +
>  1 file changed, 1 insertion(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [PATCH v5 12/15] ARM: dts: imx6ul: add dma support on ecspi
  2019-06-10  8:17 ` [PATCH v5 12/15] ARM: dts: imx6ul: add dma support on ecspi yibin.gong
@ 2019-07-17  6:42   ` Shawn Guo
  2019-07-23  9:39     ` Robin Gong
  0 siblings, 1 reply; 38+ messages in thread
From: Shawn Guo @ 2019-07-17  6:42 UTC (permalink / raw)
  To: yibin.gong
  Cc: robh+dt, mark.rutland, s.hauer, kernel, broonie, festevam, vkoul,
	dan.j.williams, u.kleine-koenig, catalin.marinas, l.stach,
	will.deacon, linux-spi, linux-imx, linux-arm-kernel,
	linux-kernel, dmaengine, devicetree

On Mon, Jun 10, 2019 at 04:17:50PM +0800, yibin.gong@nxp.com wrote:
> From: Robin Gong <yibin.gong@nxp.com>
> 
> Add dma support on ecspi.
> 
> Signed-off-by: Robin Gong <yibin.gong@nxp.com>

Applied, thanks.

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [PATCH v5 13/15] ARM: dts: imx6sll: correct sdma compatible
  2019-06-10  8:17 ` [PATCH v5 13/15] ARM: dts: imx6sll: correct sdma compatible yibin.gong
@ 2019-07-17  6:42   ` Shawn Guo
  0 siblings, 0 replies; 38+ messages in thread
From: Shawn Guo @ 2019-07-17  6:42 UTC (permalink / raw)
  To: yibin.gong
  Cc: robh+dt, mark.rutland, s.hauer, kernel, broonie, festevam, vkoul,
	dan.j.williams, u.kleine-koenig, catalin.marinas, l.stach,
	will.deacon, linux-spi, linux-imx, linux-arm-kernel,
	linux-kernel, dmaengine, devicetree

On Mon, Jun 10, 2019 at 04:17:51PM +0800, yibin.gong@nxp.com wrote:
> From: Robin Gong <yibin.gong@nxp.com>
> 
> Correct sdma compatible since ecspi errata ERR009165 has been fixed
> on i.mx6sll as i.mx6ul.
> 
> Signed-off-by: Robin Gong <yibin.gong@nxp.com>

Applied, thanks.

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [PATCH v5 14/15]  arm64: defconfig: Enable SDMA on i.mx8mq/8mm
  2019-06-10  8:17 ` [PATCH v5 14/15] arm64: defconfig: Enable SDMA on i.mx8mq/8mm yibin.gong
@ 2019-07-17  6:48   ` Shawn Guo
  0 siblings, 0 replies; 38+ messages in thread
From: Shawn Guo @ 2019-07-17  6:48 UTC (permalink / raw)
  To: yibin.gong
  Cc: robh+dt, mark.rutland, s.hauer, kernel, broonie, festevam, vkoul,
	dan.j.williams, u.kleine-koenig, catalin.marinas, l.stach,
	will.deacon, linux-spi, linux-imx, linux-arm-kernel,
	linux-kernel, dmaengine, devicetree

On Mon, Jun 10, 2019 at 04:17:52PM +0800, yibin.gong@nxp.com wrote:
> From: Robin Gong <yibin.gong@nxp.com>
> 
> Enable SDMA support on i.mx8mq/8mm chips, including enabling
> CONFIG_FW_LOADER_USER_HELPER/CONFIG_FW_LOADER_USER_HELPER_FALLBACK
> for firmware loaded by udev.
> 
> Signed-off-by: Robin Gong <yibin.gong@nxp.com>

Applied, thanks.

^ permalink raw reply	[flat|nested] 38+ messages in thread

* RE: [PATCH v5 12/15] ARM: dts: imx6ul: add dma support on ecspi
  2019-07-17  6:42   ` Shawn Guo
@ 2019-07-23  9:39     ` Robin Gong
  2019-07-24  0:48       ` Shawn Guo
  0 siblings, 1 reply; 38+ messages in thread
From: Robin Gong @ 2019-07-23  9:39 UTC (permalink / raw)
  To: Shawn Guo
  Cc: robh+dt, mark.rutland, s.hauer, kernel, broonie, festevam, vkoul,
	dan.j.williams, u.kleine-koenig, catalin.marinas, l.stach,
	will.deacon, linux-spi, dl-linux-imx, linux-arm-kernel,
	linux-kernel, dmaengine, devicetree

On 2019-7-17 at 14:42 Shawn Guo <shawnguo@kernel.org> wrote:
> On Mon, Jun 10, 2019 at 04:17:50PM +0800, yibin.gong@nxp.com wrote:
> > From: Robin Gong <yibin.gong@nxp.com>
> >
> > Add dma support on ecspi.
> >
> > Signed-off-by: Robin Gong <yibin.gong@nxp.com>
> 
> Applied, thanks.
Thanks Shawn, but how about other dts patches such as 01/15,02/15?
Hi Mark and Vinod,
 I got Ack from you last month on v5, https://patchwork.kernel.org/cover/10984301/
Is it the right time to apply v5 ? Any concern, please let me know, thanks.


^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [PATCH v5 12/15] ARM: dts: imx6ul: add dma support on ecspi
  2019-07-23  9:39     ` Robin Gong
@ 2019-07-24  0:48       ` Shawn Guo
  2019-07-24  1:53         ` Robin Gong
  0 siblings, 1 reply; 38+ messages in thread
From: Shawn Guo @ 2019-07-24  0:48 UTC (permalink / raw)
  To: Robin Gong
  Cc: robh+dt, mark.rutland, s.hauer, kernel, broonie, festevam, vkoul,
	dan.j.williams, u.kleine-koenig, catalin.marinas, l.stach,
	will.deacon, linux-spi, dl-linux-imx, linux-arm-kernel,
	linux-kernel, dmaengine, devicetree

On Tue, Jul 23, 2019 at 09:39:38AM +0000, Robin Gong wrote:
> On 2019-7-17 at 14:42 Shawn Guo <shawnguo@kernel.org> wrote:
> > On Mon, Jun 10, 2019 at 04:17:50PM +0800, yibin.gong@nxp.com wrote:
> > > From: Robin Gong <yibin.gong@nxp.com>
> > >
> > > Add dma support on ecspi.
> > >
> > > Signed-off-by: Robin Gong <yibin.gong@nxp.com>
> > 
> > Applied, thanks.
> Thanks Shawn, but how about other dts patches such as 01/15,02/15?

I need the authors of the commits being reverted agree on the reverting.

  Sean Nyekjaer <sean.nyekjaer@prevas.dk>
  Sascha Hauer <s.hauer@pengutronix.de>

Shawn

^ permalink raw reply	[flat|nested] 38+ messages in thread

* RE: [PATCH v5 12/15] ARM: dts: imx6ul: add dma support on ecspi
  2019-07-24  0:48       ` Shawn Guo
@ 2019-07-24  1:53         ` Robin Gong
  2019-09-24  9:53           ` Robin Gong
  0 siblings, 1 reply; 38+ messages in thread
From: Robin Gong @ 2019-07-24  1:53 UTC (permalink / raw)
  To: Shawn Guo
  Cc: robh+dt, mark.rutland, s.hauer, kernel, broonie, festevam, vkoul,
	dan.j.williams, u.kleine-koenig, catalin.marinas, l.stach,
	will.deacon, linux-spi, dl-linux-imx, linux-arm-kernel,
	linux-kernel, dmaengine, devicetree

On 2019-7-24 at 08:49 Shawn Guo <shawnguo@kernel.org> wrote:
> On Tue, Jul 23, 2019 at 09:39:38AM +0000, Robin Gong wrote:
> > On 2019-7-17 at 14:42 Shawn Guo <shawnguo@kernel.org> wrote:
> > > On Mon, Jun 10, 2019 at 04:17:50PM +0800, yibin.gong@nxp.com wrote:
> > > > From: Robin Gong <yibin.gong@nxp.com>
> > > >
> > > > Add dma support on ecspi.
> > > >
> > > > Signed-off-by: Robin Gong <yibin.gong@nxp.com>
> > >
> > > Applied, thanks.
> > Thanks Shawn, but how about other dts patches such as 01/15,02/15?
> 
> I need the authors of the commits being reverted agree on the reverting.
> 
>   Sean Nyekjaer <sean.nyekjaer@prevas.dk>
>   Sascha Hauer <s.hauer@pengutronix.de>
Seems Sean's mail can't be reached.
Hello Sacha, Could you please help test if my patch set could fix your issue even
I revert your patch?
https://patchwork.kernel.org/cover/10984301/
> 
> Shawn

^ permalink raw reply	[flat|nested] 38+ messages in thread

* RE: [PATCH v5 12/15] ARM: dts: imx6ul: add dma support on ecspi
  2019-07-24  1:53         ` Robin Gong
@ 2019-09-24  9:53           ` Robin Gong
  0 siblings, 0 replies; 38+ messages in thread
From: Robin Gong @ 2019-09-24  9:53 UTC (permalink / raw)
  To: Shawn Guo, s.hauer
  Cc: robh+dt, mark.rutland, kernel, broonie, festevam, vkoul,
	dan.j.williams, u.kleine-koenig, catalin.marinas, l.stach,
	will.deacon, linux-spi, dl-linux-imx, linux-arm-kernel,
	linux-kernel, dmaengine, devicetree

Ping Sacha...
On 2019-7-24 9:53 Robin Gong wrote:
> On 2019-7-24 at 08:49 Shawn Guo <shawnguo@kernel.org> wrote:
> > On Tue, Jul 23, 2019 at 09:39:38AM +0000, Robin Gong wrote:
> > > On 2019-7-17 at 14:42 Shawn Guo <shawnguo@kernel.org> wrote:
> > > > On Mon, Jun 10, 2019 at 04:17:50PM +0800, yibin.gong@nxp.com
> wrote:
> > > > > From: Robin Gong <yibin.gong@nxp.com>
> > > > >
> > > > > Add dma support on ecspi.
> > > > >
> > > > > Signed-off-by: Robin Gong <yibin.gong@nxp.com>
> > > >
> > > > Applied, thanks.
> > > Thanks Shawn, but how about other dts patches such as 01/15,02/15?
> >
> > I need the authors of the commits being reverted agree on the reverting.
> >
> >   Sean Nyekjaer <sean.nyekjaer@prevas.dk>
> >   Sascha Hauer <s.hauer@pengutronix.de>
> Seems Sean's mail can't be reached.
> Hello Sacha, Could you please help test if my patch set could fix your issue
> even I revert your patch?
> https://patchwork.kernel.org/cover/10984301/
> >
> > Shawn

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [PATCH v5 11/15] dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm
  2019-06-10  8:17 ` [PATCH v5 11/15] dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm yibin.gong
@ 2019-09-24 13:27   ` Schrempf Frieder
  2019-09-25 11:26     ` Robin Gong
  0 siblings, 1 reply; 38+ messages in thread
From: Schrempf Frieder @ 2019-09-24 13:27 UTC (permalink / raw)
  To: yibin.gong
  Cc: linux-arm-kernel, vkoul, dan.j.williams, shawnguo, s.hauer,
	Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
	dmaengine, linux-kernel

Hi Robin,

> From: Robin Gong <yibin.gong at nxp.com>
> 
> Because the number of ecspi1 rx event on i.mx8mm is 0, the condition
> check ignore such special case without dma channel enabled, which caused
> ecspi1 rx works failed. Actually, no need to check event_id0/event_id1
> and replace checking 'event_id1' with 'DMA_DEV_TO_DEV', so that configure
> event_id1 only in case DEV_TO_DEV.
> 
> Signed-off-by: Robin Gong <yibin.gong at nxp.com>
> Acked-by: Vinod Koul <vkoul at kernel.org>

I have a custom board with i.MX8MM and SPI flash on ecspi1. I'm 
currently testing with v5.3 and as SPI didn't work, I tried two 
different things:

1. Removing 'dmas' and 'dma-names' from the ecspi1 node in imx8mm.dtsi,
    to use PIO instead of DMA. This works as expected and the driver
    boots with the following messages:

        spi_imx 30820000.spi: dma setup error -19, use pio
        m25p80 spi0.0: mx25v8035f (1024 Kbytes)
        spi_imx 30820000.spi: probed

2. Applying your patchset and use DMA. In this case, the flash also
    works fine, but there are some error messages printed while booting:

        spi_master spi0: I/O Error in DMA RX
        m25p80 spi0.0: SPI transfer failed: -110
        spi_master spi0: failed to transfer one message from queue
        m25p80 spi0.0: mx25v8035f (1024 Kbytes)
        spi_imx 30820000.spi: probed

It would be great to get your patches merged and fix SPI + DMA, but for 
i.MX8MM, we need to get rid of the error messages. Do you have an idea, 
what's wrong?

Thanks,
Frieder

^ permalink raw reply	[flat|nested] 38+ messages in thread

* RE: [PATCH v5 11/15] dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm
  2019-09-24 13:27   ` Schrempf Frieder
@ 2019-09-25 11:26     ` Robin Gong
  2019-09-25 14:53       ` Schrempf Frieder
  0 siblings, 1 reply; 38+ messages in thread
From: Robin Gong @ 2019-09-25 11:26 UTC (permalink / raw)
  To: Schrempf Frieder
  Cc: linux-arm-kernel, vkoul, dan.j.williams, shawnguo, s.hauer,
	Pengutronix Kernel Team, Fabio Estevam, dl-linux-imx, dmaengine,
	linux-kernel

On 2019-9-24 21:28 Schrempf Frieder <frieder.schrempf@kontron.de> wrote:
> 
> Hi Robin,
> 
> > From: Robin Gong <yibin.gong at nxp.com>
> >
> > Because the number of ecspi1 rx event on i.mx8mm is 0, the condition
> > check ignore such special case without dma channel enabled, which
> > caused
> > ecspi1 rx works failed. Actually, no need to check event_id0/event_id1
> > and replace checking 'event_id1' with 'DMA_DEV_TO_DEV', so that
> > configure
> > event_id1 only in case DEV_TO_DEV.
> >
> > Signed-off-by: Robin Gong <yibin.gong at nxp.com>
> > Acked-by: Vinod Koul <vkoul at kernel.org>
> 
> I have a custom board with i.MX8MM and SPI flash on ecspi1. I'm currently
> testing with v5.3 and as SPI didn't work, I tried two different things:
> 
> 1. Removing 'dmas' and 'dma-names' from the ecspi1 node in imx8mm.dtsi,
>     to use PIO instead of DMA. This works as expected and the driver
>     boots with the following messages:
> 
>         spi_imx 30820000.spi: dma setup error -19, use pio
>         m25p80 spi0.0: mx25v8035f (1024 Kbytes)
>         spi_imx 30820000.spi: probed
> 
> 2. Applying your patchset and use DMA. In this case, the flash also
>     works fine, but there are some error messages printed while booting:
> 
>         spi_master spi0: I/O Error in DMA RX
>         m25p80 spi0.0: SPI transfer failed: -110
>         spi_master spi0: failed to transfer one message from queue
>         m25p80 spi0.0: mx25v8035f (1024 Kbytes)
>         spi_imx 30820000.spi: probed
> 
> It would be great to get your patches merged and fix SPI + DMA, but for
> i.MX8MM, we need to get rid of the error messages. Do you have an idea,
> what's wrong?
Could you check if the length of spi message is bigger than fifo_size during
spi_nor probe? If yes, at that time maybe sdma firmware not loaded.
if (transfer->len < spi_imx->devtype_data->fifo_size)
> Thanks,
> Frieder

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [PATCH v5 11/15] dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm
  2019-09-25 11:26     ` Robin Gong
@ 2019-09-25 14:53       ` Schrempf Frieder
  2019-09-27  1:55         ` Robin Gong
  0 siblings, 1 reply; 38+ messages in thread
From: Schrempf Frieder @ 2019-09-25 14:53 UTC (permalink / raw)
  To: Robin Gong
  Cc: linux-arm-kernel, vkoul, dan.j.williams, shawnguo, s.hauer,
	Pengutronix Kernel Team, Fabio Estevam, dl-linux-imx, dmaengine,
	linux-kernel, linux-spi

On 25.09.19 13:26, Robin Gong wrote:
> On 2019-9-24 21:28 Schrempf Frieder <frieder.schrempf@kontron.de> wrote:
>>
>> Hi Robin,
>>
>>> From: Robin Gong <yibin.gong at nxp.com>
>>>
>>> Because the number of ecspi1 rx event on i.mx8mm is 0, the condition
>>> check ignore such special case without dma channel enabled, which
>>> caused
>>> ecspi1 rx works failed. Actually, no need to check event_id0/event_id1
>>> and replace checking 'event_id1' with 'DMA_DEV_TO_DEV', so that
>>> configure
>>> event_id1 only in case DEV_TO_DEV.
>>>
>>> Signed-off-by: Robin Gong <yibin.gong at nxp.com>
>>> Acked-by: Vinod Koul <vkoul at kernel.org>
>>
>> I have a custom board with i.MX8MM and SPI flash on ecspi1. I'm currently
>> testing with v5.3 and as SPI didn't work, I tried two different things:
>>
>> 1. Removing 'dmas' and 'dma-names' from the ecspi1 node in imx8mm.dtsi,
>>      to use PIO instead of DMA. This works as expected and the driver
>>      boots with the following messages:
>>
>>          spi_imx 30820000.spi: dma setup error -19, use pio
>>          m25p80 spi0.0: mx25v8035f (1024 Kbytes)
>>          spi_imx 30820000.spi: probed
>>
>> 2. Applying your patchset and use DMA. In this case, the flash also
>>      works fine, but there are some error messages printed while booting:
>>
>>          spi_master spi0: I/O Error in DMA RX
>>          m25p80 spi0.0: SPI transfer failed: -110
>>          spi_master spi0: failed to transfer one message from queue
>>          m25p80 spi0.0: mx25v8035f (1024 Kbytes)
>>          spi_imx 30820000.spi: probed
>>
>> It would be great to get your patches merged and fix SPI + DMA, but for
>> i.MX8MM, we need to get rid of the error messages. Do you have an idea,
>> what's wrong?

> Could you check if the length of spi message is bigger than fifo_size during
> spi_nor probe? If yes, at that time maybe sdma firmware not loaded.
> if (transfer->len < spi_imx->devtype_data->fifo_size)

Indeed, most of the transfers triggered by the SPI NOR dirver are below 
fifo_size and work fine, but some are bigger. The transfers therefore 
try to use DMA, but the firmware is not loaded yet.

How is this supposed to work? Shouldn't all transfers use PIO as long as 
the SDMA firmware is not loaded yet?

(+ Cc: linux-spi@vger.kernel.org)

^ permalink raw reply	[flat|nested] 38+ messages in thread

* RE: [PATCH v5 11/15] dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm
  2019-09-25 14:53       ` Schrempf Frieder
@ 2019-09-27  1:55         ` Robin Gong
  2020-02-06 10:17           ` Schrempf Frieder
  0 siblings, 1 reply; 38+ messages in thread
From: Robin Gong @ 2019-09-27  1:55 UTC (permalink / raw)
  To: Schrempf Frieder
  Cc: linux-arm-kernel, vkoul, dan.j.williams, shawnguo, s.hauer,
	Pengutronix Kernel Team, Fabio Estevam, dl-linux-imx, dmaengine,
	linux-kernel, linux-spi

On 2019-9-25 22:53 Schrempf Frieder <frieder.schrempf@kontron.de> wrote:
> On 25.09.19 13:26, Robin Gong wrote:
> > On 2019-9-24 21:28 Schrempf Frieder <frieder.schrempf@kontron.de>
> wrote:
> >>
> >> Hi Robin,
> >>
> >>> From: Robin Gong <yibin.gong at nxp.com>
> >>>
> >>> Because the number of ecspi1 rx event on i.mx8mm is 0, the condition
> >>> check ignore such special case without dma channel enabled, which
> >>> caused
> >>> ecspi1 rx works failed. Actually, no need to check
> >>> event_id0/event_id1 and replace checking 'event_id1' with
> >>> 'DMA_DEV_TO_DEV', so that configure
> >>> event_id1 only in case DEV_TO_DEV.
> >>>
> >>> Signed-off-by: Robin Gong <yibin.gong at nxp.com>
> >>> Acked-by: Vinod Koul <vkoul at kernel.org>
> >>
> >> I have a custom board with i.MX8MM and SPI flash on ecspi1. I'm
> >> currently testing with v5.3 and as SPI didn't work, I tried two different
> things:
> >>
> >> 1. Removing 'dmas' and 'dma-names' from the ecspi1 node in
> imx8mm.dtsi,
> >>      to use PIO instead of DMA. This works as expected and the driver
> >>      boots with the following messages:
> >>
> >>          spi_imx 30820000.spi: dma setup error -19, use pio
> >>          m25p80 spi0.0: mx25v8035f (1024 Kbytes)
> >>          spi_imx 30820000.spi: probed
> >>
> >> 2. Applying your patchset and use DMA. In this case, the flash also
> >>      works fine, but there are some error messages printed while
> booting:
> >>
> >>          spi_master spi0: I/O Error in DMA RX
> >>          m25p80 spi0.0: SPI transfer failed: -110
> >>          spi_master spi0: failed to transfer one message from queue
> >>          m25p80 spi0.0: mx25v8035f (1024 Kbytes)
> >>          spi_imx 30820000.spi: probed
> >>
> >> It would be great to get your patches merged and fix SPI + DMA, but
> >> for i.MX8MM, we need to get rid of the error messages. Do you have an
> >> idea, what's wrong?
> 
> > Could you check if the length of spi message is bigger than fifo_size
> > during spi_nor probe? If yes, at that time maybe sdma firmware not loaded.
> > if (transfer->len < spi_imx->devtype_data->fifo_size)
> 
> Indeed, most of the transfers triggered by the SPI NOR dirver are below
> fifo_size and work fine, but some are bigger. The transfers therefore try to
> use DMA, but the firmware is not loaded yet.
> 
> How is this supposed to work? Shouldn't all transfers use PIO as long as the
> SDMA firmware is not loaded yet?
Yes, for ecspi should work with ram script, it's better check if sdma firmware
is ready in spi_imx_dma_configure(), need modification in sdma driver too.
I'll create another patch after this patch set accepted. 
> 
> (+ Cc: linux-spi@vger.kernel.org)

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [PATCH v5 11/15] dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm
  2019-09-27  1:55         ` Robin Gong
@ 2020-02-06 10:17           ` Schrempf Frieder
  2020-02-10 12:28             ` Robin Gong
  0 siblings, 1 reply; 38+ messages in thread
From: Schrempf Frieder @ 2020-02-06 10:17 UTC (permalink / raw)
  To: Robin Gong
  Cc: linux-arm-kernel, vkoul, dan.j.williams, shawnguo, s.hauer,
	Pengutronix Kernel Team, Fabio Estevam, dl-linux-imx, dmaengine,
	linux-kernel, linux-spi

Hi,

On 27.09.19 03:55, Robin Gong wrote:
> On 2019-9-25 22:53 Schrempf Frieder <frieder.schrempf@kontron.de> wrote:
>> On 25.09.19 13:26, Robin Gong wrote:
>>> On 2019-9-24 21:28 Schrempf Frieder <frieder.schrempf@kontron.de>
>> wrote:
>>>>
>>>> Hi Robin,
>>>>
>>>>> From: Robin Gong <yibin.gong at nxp.com>
>>>>>
>>>>> Because the number of ecspi1 rx event on i.mx8mm is 0, the condition
>>>>> check ignore such special case without dma channel enabled, which
>>>>> caused
>>>>> ecspi1 rx works failed. Actually, no need to check
>>>>> event_id0/event_id1 and replace checking 'event_id1' with
>>>>> 'DMA_DEV_TO_DEV', so that configure
>>>>> event_id1 only in case DEV_TO_DEV.
>>>>>
>>>>> Signed-off-by: Robin Gong <yibin.gong at nxp.com>
>>>>> Acked-by: Vinod Koul <vkoul at kernel.org>
>>>>
>>>> I have a custom board with i.MX8MM and SPI flash on ecspi1. I'm
>>>> currently testing with v5.3 and as SPI didn't work, I tried two different
>> things:
>>>>
>>>> 1. Removing 'dmas' and 'dma-names' from the ecspi1 node in
>> imx8mm.dtsi,
>>>>       to use PIO instead of DMA. This works as expected and the driver
>>>>       boots with the following messages:
>>>>
>>>>           spi_imx 30820000.spi: dma setup error -19, use pio
>>>>           m25p80 spi0.0: mx25v8035f (1024 Kbytes)
>>>>           spi_imx 30820000.spi: probed
>>>>
>>>> 2. Applying your patchset and use DMA. In this case, the flash also
>>>>       works fine, but there are some error messages printed while
>> booting:
>>>>
>>>>           spi_master spi0: I/O Error in DMA RX
>>>>           m25p80 spi0.0: SPI transfer failed: -110
>>>>           spi_master spi0: failed to transfer one message from queue
>>>>           m25p80 spi0.0: mx25v8035f (1024 Kbytes)
>>>>           spi_imx 30820000.spi: probed
>>>>
>>>> It would be great to get your patches merged and fix SPI + DMA, but
>>>> for i.MX8MM, we need to get rid of the error messages. Do you have an
>>>> idea, what's wrong?
>>
>>> Could you check if the length of spi message is bigger than fifo_size
>>> during spi_nor probe? If yes, at that time maybe sdma firmware not loaded.
>>> if (transfer->len < spi_imx->devtype_data->fifo_size)
>>
>> Indeed, most of the transfers triggered by the SPI NOR dirver are below
>> fifo_size and work fine, but some are bigger. The transfers therefore try to
>> use DMA, but the firmware is not loaded yet.
>>
>> How is this supposed to work? Shouldn't all transfers use PIO as long as the
>> SDMA firmware is not loaded yet?
> Yes, for ecspi should work with ram script, it's better check if sdma firmware
> is ready in spi_imx_dma_configure(), need modification in sdma driver too.
> I'll create another patch after this patch set accepted.

This still seems to be broken upstream. Is anyone working on fixing SPI 
+ DMA for i.MX8MM? Otherwise I will send a patch that removes the DMA 
from the ecspi nodes in the devicetree.

Thanks,
Frieder

^ permalink raw reply	[flat|nested] 38+ messages in thread

* RE: [PATCH v5 11/15] dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm
  2020-02-06 10:17           ` Schrempf Frieder
@ 2020-02-10 12:28             ` Robin Gong
  0 siblings, 0 replies; 38+ messages in thread
From: Robin Gong @ 2020-02-10 12:28 UTC (permalink / raw)
  To: Schrempf Frieder
  Cc: linux-arm-kernel, vkoul, dan.j.williams, shawnguo, s.hauer,
	Pengutronix Kernel Team, Fabio Estevam, dl-linux-imx, dmaengine,
	linux-kernel, linux-spi

On 2020/02/06 Schrempf Frieder <frieder.schrempf@kontron.de> wrote:
> 
> Hi,
> On 27.09.19 03:55, Robin Gong wrote:
> > On 2019-9-25 22:53 Schrempf Frieder <frieder.schrempf@kontron.de> wrote:
> >> On 25.09.19 13:26, Robin Gong wrote:
> >>> On 2019-9-24 21:28 Schrempf Frieder <frieder.schrempf@kontron.de>
> >> wrote:
> >>>>
> >>>> Hi Robin,
> >>>>
> >>>>> From: Robin Gong <yibin.gong at nxp.com>
> >>>>>
> >>>>> Because the number of ecspi1 rx event on i.mx8mm is 0, the
> >>>>> condition check ignore such special case without dma channel
> >>>>> enabled, which caused
> >>>>> ecspi1 rx works failed. Actually, no need to check
> >>>>> event_id0/event_id1 and replace checking 'event_id1' with
> >>>>> 'DMA_DEV_TO_DEV', so that configure
> >>>>> event_id1 only in case DEV_TO_DEV.
> >>>>>
> >>>>> Signed-off-by: Robin Gong <yibin.gong at nxp.com>
> >>>>> Acked-by: Vinod Koul <vkoul at kernel.org>
> >>>>
> >>>> I have a custom board with i.MX8MM and SPI flash on ecspi1. I'm
> >>>> currently testing with v5.3 and as SPI didn't work, I tried two
> >>>> different
> >> things:
> >>>>
> >>>> 1. Removing 'dmas' and 'dma-names' from the ecspi1 node in
> >> imx8mm.dtsi,
> >>>>       to use PIO instead of DMA. This works as expected and the driver
> >>>>       boots with the following messages:
> >>>>
> >>>>           spi_imx 30820000.spi: dma setup error -19, use pio
> >>>>           m25p80 spi0.0: mx25v8035f (1024 Kbytes)
> >>>>           spi_imx 30820000.spi: probed
> >>>>
> >>>> 2. Applying your patchset and use DMA. In this case, the flash also
> >>>>       works fine, but there are some error messages printed while
> >> booting:
> >>>>
> >>>>           spi_master spi0: I/O Error in DMA RX
> >>>>           m25p80 spi0.0: SPI transfer failed: -110
> >>>>           spi_master spi0: failed to transfer one message from queue
> >>>>           m25p80 spi0.0: mx25v8035f (1024 Kbytes)
> >>>>           spi_imx 30820000.spi: probed
> >>>>
> >>>> It would be great to get your patches merged and fix SPI + DMA, but
> >>>> for i.MX8MM, we need to get rid of the error messages. Do you have
> >>>> an idea, what's wrong?
> >>
> >>> Could you check if the length of spi message is bigger than
> >>> fifo_size during spi_nor probe? If yes, at that time maybe sdma firmware
> not loaded.
> >>> if (transfer->len < spi_imx->devtype_data->fifo_size)
> >>
> >> Indeed, most of the transfers triggered by the SPI NOR dirver are
> >> below fifo_size and work fine, but some are bigger. The transfers
> >> therefore try to use DMA, but the firmware is not loaded yet.
> >>
> >> How is this supposed to work? Shouldn't all transfers use PIO as long
> >> as the SDMA firmware is not loaded yet?
> > Yes, for ecspi should work with ram script, it's better check if sdma
> > firmware is ready in spi_imx_dma_configure(), need modification in sdma
> driver too.
> > I'll create another patch after this patch set accepted.
> 
> This still seems to be broken upstream. Is anyone working on fixing SPI
> + DMA for i.MX8MM? Otherwise I will send a patch that removes the DMA
> from the ecspi nodes in the devicetree.
Sorry, Frieder, my patch set has been blocked for so long time because I revert
some patches and need get commit from patch owner, unfortunately, I didn't
get any feedback from them although I got ACK from maintainer. I'll pick up
them, rebase and resend it these days, then could address your issue later.  

^ permalink raw reply	[flat|nested] 38+ messages in thread

end of thread, other threads:[~2020-02-10 12:28 UTC | newest]

Thread overview: 38+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-06-10  8:17 [PATCH v5 00/15] add ecspi ERR009165 for i.mx6/7 soc family yibin.gong
2019-06-10  8:17 ` [PATCH v5 01/15] Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core" yibin.gong
2019-06-10  8:17 ` [PATCH v5 02/15] Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores" yibin.gong
2019-06-10  8:17 ` [PATCH v5 03/15] Revert "dmaengine: imx-sdma: refine to load context only once" yibin.gong
2019-06-10  8:17 ` [PATCH v5 04/15] dmaengine: imx-sdma: remove dupilicated sdma_load_context yibin.gong
2019-06-10  8:17 ` [PATCH v5 05/15] dmaengine: imx-sdma: add mcu_2_ecspi script yibin.gong
2019-06-10  8:17 ` [PATCH v5 06/15] spi: imx: fix ERR009165 yibin.gong
2019-06-10  8:17 ` [PATCH v5 07/15] spi: imx: remove ERR009165 workaround on i.mx6ul yibin.gong
2019-06-10  8:17 ` [PATCH v5 08/15] spi: imx: add new i.mx6ul compatible name in binding doc yibin.gong
2019-07-09  2:17   ` Rob Herring
2019-06-10  8:17 ` [PATCH v5 09/15] dmaengine: imx-sdma: remove ERR009165 on i.mx6ul yibin.gong
2019-06-10  8:17 ` [PATCH v5 10/15] dma: imx-sdma: add i.mx6ul/6sx compatible name yibin.gong
2019-06-11 22:35   ` Rob Herring
2019-06-12  2:32     ` Robin Gong
2019-06-10  8:17 ` [PATCH v5 11/15] dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm yibin.gong
2019-09-24 13:27   ` Schrempf Frieder
2019-09-25 11:26     ` Robin Gong
2019-09-25 14:53       ` Schrempf Frieder
2019-09-27  1:55         ` Robin Gong
2020-02-06 10:17           ` Schrempf Frieder
2020-02-10 12:28             ` Robin Gong
2019-06-10  8:17 ` [PATCH v5 12/15] ARM: dts: imx6ul: add dma support on ecspi yibin.gong
2019-07-17  6:42   ` Shawn Guo
2019-07-23  9:39     ` Robin Gong
2019-07-24  0:48       ` Shawn Guo
2019-07-24  1:53         ` Robin Gong
2019-09-24  9:53           ` Robin Gong
2019-06-10  8:17 ` [PATCH v5 13/15] ARM: dts: imx6sll: correct sdma compatible yibin.gong
2019-07-17  6:42   ` Shawn Guo
2019-06-10  8:17 ` [PATCH v5 14/15] arm64: defconfig: Enable SDMA on i.mx8mq/8mm yibin.gong
2019-07-17  6:48   ` Shawn Guo
2019-06-10  8:17 ` [PATCH v5 15/15] dmaengine: imx-sdma: add uart rom script yibin.gong
2019-06-10 12:55   ` Vinod Koul
2019-06-11  3:04     ` Robin Gong
2019-06-11  4:37       ` Vinod Koul
2019-06-21  8:42 ` [PATCH v5 00/15] add ecspi ERR009165 for i.mx6/7 soc family Robin Gong
2019-06-24  0:16   ` Shawn Guo
2019-06-25  8:05     ` Robin Gong

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).