dmaengine Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH AUTOSEL 5.1 03/59] dmaengine: jz4780: Fix transfers being ACKed too soon
       [not found] <20190614202843.26941-1-sashal@kernel.org>
@ 2019-06-14 20:27 ` Sasha Levin
  2019-06-14 20:27 ` [PATCH AUTOSEL 5.1 04/59] dmaengine: dw-axi-dmac: fix null dereference when pointer first is null Sasha Levin
                   ` (6 subsequent siblings)
  7 siblings, 0 replies; 8+ messages in thread
From: Sasha Levin @ 2019-06-14 20:27 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Paul Cercueil, Vinod Koul, Sasha Levin, dmaengine

From: Paul Cercueil <paul@crapouillou.net>

[ Upstream commit 4e4106f5e942bff65548e82fc330d40385c89220 ]

When a multi-descriptor DMA transfer is in progress, the "IRQ pending"
flag will apparently be set for that channel as soon as the last
descriptor loads, way before the IRQ actually happens. This behaviour
has been observed on the JZ4725B, but maybe other SoCs are affected.

In the case where another DMA transfer is running into completion on a
separate channel, the IRQ handler would then run the completion handler
for our previous channel even if the transfer didn't actually finish.

Fix this by checking in the completion handler that we're indeed done;
if not the interrupted DMA transfer will simply be resumed.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/dma-jz4780.c | 32 +++++++++++++++++++++-----------
 1 file changed, 21 insertions(+), 11 deletions(-)

diff --git a/drivers/dma/dma-jz4780.c b/drivers/dma/dma-jz4780.c
index 9ce0a386225b..f49534019d37 100644
--- a/drivers/dma/dma-jz4780.c
+++ b/drivers/dma/dma-jz4780.c
@@ -666,10 +666,11 @@ static enum dma_status jz4780_dma_tx_status(struct dma_chan *chan,
 	return status;
 }
 
-static void jz4780_dma_chan_irq(struct jz4780_dma_dev *jzdma,
-	struct jz4780_dma_chan *jzchan)
+static bool jz4780_dma_chan_irq(struct jz4780_dma_dev *jzdma,
+				struct jz4780_dma_chan *jzchan)
 {
 	uint32_t dcs;
+	bool ack = true;
 
 	spin_lock(&jzchan->vchan.lock);
 
@@ -692,12 +693,20 @@ static void jz4780_dma_chan_irq(struct jz4780_dma_dev *jzdma,
 		if ((dcs & (JZ_DMA_DCS_AR | JZ_DMA_DCS_HLT)) == 0) {
 			if (jzchan->desc->type == DMA_CYCLIC) {
 				vchan_cyclic_callback(&jzchan->desc->vdesc);
-			} else {
+
+				jz4780_dma_begin(jzchan);
+			} else if (dcs & JZ_DMA_DCS_TT) {
 				vchan_cookie_complete(&jzchan->desc->vdesc);
 				jzchan->desc = NULL;
-			}
 
-			jz4780_dma_begin(jzchan);
+				jz4780_dma_begin(jzchan);
+			} else {
+				/* False positive - continue the transfer */
+				ack = false;
+				jz4780_dma_chn_writel(jzdma, jzchan->id,
+						      JZ_DMA_REG_DCS,
+						      JZ_DMA_DCS_CTE);
+			}
 		}
 	} else {
 		dev_err(&jzchan->vchan.chan.dev->device,
@@ -705,21 +714,22 @@ static void jz4780_dma_chan_irq(struct jz4780_dma_dev *jzdma,
 	}
 
 	spin_unlock(&jzchan->vchan.lock);
+
+	return ack;
 }
 
 static irqreturn_t jz4780_dma_irq_handler(int irq, void *data)
 {
 	struct jz4780_dma_dev *jzdma = data;
+	unsigned int nb_channels = jzdma->soc_data->nb_channels;
 	uint32_t pending, dmac;
 	int i;
 
 	pending = jz4780_dma_ctrl_readl(jzdma, JZ_DMA_REG_DIRQP);
 
-	for (i = 0; i < jzdma->soc_data->nb_channels; i++) {
-		if (!(pending & (1<<i)))
-			continue;
-
-		jz4780_dma_chan_irq(jzdma, &jzdma->chan[i]);
+	for_each_set_bit(i, (unsigned long *)&pending, nb_channels) {
+		if (jz4780_dma_chan_irq(jzdma, &jzdma->chan[i]))
+			pending &= ~BIT(i);
 	}
 
 	/* Clear halt and address error status of all channels. */
@@ -728,7 +738,7 @@ static irqreturn_t jz4780_dma_irq_handler(int irq, void *data)
 	jz4780_dma_ctrl_writel(jzdma, JZ_DMA_REG_DMAC, dmac);
 
 	/* Clear interrupt pending status. */
-	jz4780_dma_ctrl_writel(jzdma, JZ_DMA_REG_DIRQP, 0);
+	jz4780_dma_ctrl_writel(jzdma, JZ_DMA_REG_DIRQP, pending);
 
 	return IRQ_HANDLED;
 }
-- 
2.20.1


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH AUTOSEL 5.1 04/59] dmaengine: dw-axi-dmac: fix null dereference when pointer first is null
       [not found] <20190614202843.26941-1-sashal@kernel.org>
  2019-06-14 20:27 ` [PATCH AUTOSEL 5.1 03/59] dmaengine: jz4780: Fix transfers being ACKed too soon Sasha Levin
@ 2019-06-14 20:27 ` Sasha Levin
  2019-06-14 20:27 ` [PATCH AUTOSEL 5.1 05/59] dmaengine: mediatek-cqdma: sleeping in atomic context Sasha Levin
                   ` (5 subsequent siblings)
  7 siblings, 0 replies; 8+ messages in thread
From: Sasha Levin @ 2019-06-14 20:27 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Colin Ian King, Vinod Koul, Sasha Levin, dmaengine

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit 0788611c9a0925c607de536b2449de5ed98ef8df ]

In the unlikely event that axi_desc_get returns a null desc in the
very first iteration of the while-loop the error exit path ends
up calling axi_desc_put on a null pointer 'first' and this causes
a null pointer dereference.  Fix this by adding a null check on
pointer 'first' before calling axi_desc_put.

Addresses-Coverity: ("Explicit null dereference")
Fixes: 1fe20f1b8454 ("dmaengine: Introduce DW AXI DMAC driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
index b2ac1d2c5b86..a1ce307c502f 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
@@ -512,7 +512,8 @@ dma_chan_prep_dma_memcpy(struct dma_chan *dchan, dma_addr_t dst_adr,
 	return vchan_tx_prep(&chan->vc, &first->vd, flags);
 
 err_desc_get:
-	axi_desc_put(first);
+	if (first)
+		axi_desc_put(first);
 	return NULL;
 }
 
-- 
2.20.1


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH AUTOSEL 5.1 05/59] dmaengine: mediatek-cqdma: sleeping in atomic context
       [not found] <20190614202843.26941-1-sashal@kernel.org>
  2019-06-14 20:27 ` [PATCH AUTOSEL 5.1 03/59] dmaengine: jz4780: Fix transfers being ACKed too soon Sasha Levin
  2019-06-14 20:27 ` [PATCH AUTOSEL 5.1 04/59] dmaengine: dw-axi-dmac: fix null dereference when pointer first is null Sasha Levin
@ 2019-06-14 20:27 ` Sasha Levin
  2019-06-14 20:27 ` [PATCH AUTOSEL 5.1 06/59] dmaengine: sprd: Fix the possible crash when getting descriptor status Sasha Levin
                   ` (4 subsequent siblings)
  7 siblings, 0 replies; 8+ messages in thread
From: Sasha Levin @ 2019-06-14 20:27 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Dan Carpenter, Vinod Koul, Sasha Levin, dmaengine

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 069b3c4214f27b130d0642f32438560db30f452e ]

The mtk_cqdma_poll_engine_done() function takes a true/false parameter
where true means it's called from atomic context.  There are a couple
places where it was set to false but it's actually in atomic context
so it should be true.

All the callers for mtk_cqdma_hard_reset() are holding a spin_lock and
in mtk_cqdma_free_chan_resources() we take a spin_lock before calling
the mtk_cqdma_poll_engine_done() function.

Fixes: b1f01e48df5a ("dmaengine: mediatek: Add MediaTek Command-Queue DMA controller for MT6765 SoC")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/mediatek/mtk-cqdma.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/mediatek/mtk-cqdma.c b/drivers/dma/mediatek/mtk-cqdma.c
index 814853842e29..723b11c190b3 100644
--- a/drivers/dma/mediatek/mtk-cqdma.c
+++ b/drivers/dma/mediatek/mtk-cqdma.c
@@ -225,7 +225,7 @@ static int mtk_cqdma_hard_reset(struct mtk_cqdma_pchan *pc)
 	mtk_dma_set(pc, MTK_CQDMA_RESET, MTK_CQDMA_HARD_RST_BIT);
 	mtk_dma_clr(pc, MTK_CQDMA_RESET, MTK_CQDMA_HARD_RST_BIT);
 
-	return mtk_cqdma_poll_engine_done(pc, false);
+	return mtk_cqdma_poll_engine_done(pc, true);
 }
 
 static void mtk_cqdma_start(struct mtk_cqdma_pchan *pc,
@@ -671,7 +671,7 @@ static void mtk_cqdma_free_chan_resources(struct dma_chan *c)
 		mtk_dma_set(cvc->pc, MTK_CQDMA_FLUSH, MTK_CQDMA_FLUSH_BIT);
 
 		/* wait for the completion of flush operation */
-		if (mtk_cqdma_poll_engine_done(cvc->pc, false) < 0)
+		if (mtk_cqdma_poll_engine_done(cvc->pc, true) < 0)
 			dev_err(cqdma2dev(to_cqdma_dev(c)), "cqdma flush timeout\n");
 
 		/* clear the flush bit and interrupt flag */
-- 
2.20.1


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH AUTOSEL 5.1 06/59] dmaengine: sprd: Fix the possible crash when getting descriptor status
       [not found] <20190614202843.26941-1-sashal@kernel.org>
                   ` (2 preceding siblings ...)
  2019-06-14 20:27 ` [PATCH AUTOSEL 5.1 05/59] dmaengine: mediatek-cqdma: sleeping in atomic context Sasha Levin
@ 2019-06-14 20:27 ` Sasha Levin
  2019-06-14 20:27 ` [PATCH AUTOSEL 5.1 07/59] dmaengine: sprd: Add validation of current descriptor in irq handler Sasha Levin
                   ` (3 subsequent siblings)
  7 siblings, 0 replies; 8+ messages in thread
From: Sasha Levin @ 2019-06-14 20:27 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Baolin Wang, Vinod Koul, Sasha Levin, dmaengine

From: Baolin Wang <baolin.wang@linaro.org>

[ Upstream commit 16d0f85e45b99411ac10cb12cdd9279204a72381 ]

We will get a NULL virtual descriptor by vchan_find_desc() when the descriptor
has been submitted, that will crash the kernel when getting the descriptor
status.

In this case, since the descriptor has been submitted to process, but it
is not completed now, which means the descriptor is listed into the
'vc->desc_submitted' list now. So we can not get current processing descriptor
by vchan_find_desc(), but the pointer 'schan->cur_desc' will point to the
current processing descriptor, then we can use 'schan->cur_desc' to get
current processing descriptor's status to avoid this issue.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/sprd-dma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c
index 48431e2da987..e29342ab85f6 100644
--- a/drivers/dma/sprd-dma.c
+++ b/drivers/dma/sprd-dma.c
@@ -625,7 +625,7 @@ static enum dma_status sprd_dma_tx_status(struct dma_chan *chan,
 		else
 			pos = 0;
 	} else if (schan->cur_desc && schan->cur_desc->vd.tx.cookie == cookie) {
-		struct sprd_dma_desc *sdesc = to_sprd_dma_desc(vd);
+		struct sprd_dma_desc *sdesc = schan->cur_desc;
 
 		if (sdesc->dir == DMA_DEV_TO_MEM)
 			pos = sprd_dma_get_dst_addr(schan);
-- 
2.20.1


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH AUTOSEL 5.1 07/59] dmaengine: sprd: Add validation of current descriptor in irq handler
       [not found] <20190614202843.26941-1-sashal@kernel.org>
                   ` (3 preceding siblings ...)
  2019-06-14 20:27 ` [PATCH AUTOSEL 5.1 06/59] dmaengine: sprd: Fix the possible crash when getting descriptor status Sasha Levin
@ 2019-06-14 20:27 ` Sasha Levin
  2019-06-14 20:27 ` [PATCH AUTOSEL 5.1 08/59] dmaengine: sprd: Fix the incorrect start for 2-stage destination channels Sasha Levin
                   ` (2 subsequent siblings)
  7 siblings, 0 replies; 8+ messages in thread
From: Sasha Levin @ 2019-06-14 20:27 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Baolin Wang, Vinod Koul, Sasha Levin, dmaengine

From: Baolin Wang <baolin.wang@linaro.org>

[ Upstream commit 58152b0e573e5581c4b9ef7cf06d2e9fafae27d4 ]

When user terminates one DMA channel to free all its descriptors, but
at the same time one transaction interrupt was triggered possibly, now
we should not handle this interrupt by validating if the 'schan->cur_desc'
was set as NULL to avoid crashing the kernel.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/sprd-dma.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c
index e29342ab85f6..431e289d59a5 100644
--- a/drivers/dma/sprd-dma.c
+++ b/drivers/dma/sprd-dma.c
@@ -552,12 +552,17 @@ static irqreturn_t dma_irq_handle(int irq, void *dev_id)
 		schan = &sdev->channels[i];
 
 		spin_lock(&schan->vc.lock);
+
+		sdesc = schan->cur_desc;
+		if (!sdesc) {
+			spin_unlock(&schan->vc.lock);
+			return IRQ_HANDLED;
+		}
+
 		int_type = sprd_dma_get_int_type(schan);
 		req_type = sprd_dma_get_req_type(schan);
 		sprd_dma_clear_int(schan);
 
-		sdesc = schan->cur_desc;
-
 		/* cyclic mode schedule callback */
 		cyclic = schan->linklist.phy_addr ? true : false;
 		if (cyclic == true) {
-- 
2.20.1


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH AUTOSEL 5.1 08/59] dmaengine: sprd: Fix the incorrect start for 2-stage destination channels
       [not found] <20190614202843.26941-1-sashal@kernel.org>
                   ` (4 preceding siblings ...)
  2019-06-14 20:27 ` [PATCH AUTOSEL 5.1 07/59] dmaengine: sprd: Add validation of current descriptor in irq handler Sasha Levin
@ 2019-06-14 20:27 ` Sasha Levin
  2019-06-14 20:27 ` [PATCH AUTOSEL 5.1 09/59] dmaengine: sprd: Fix block length overflow Sasha Levin
  2019-06-14 20:27 ` [PATCH AUTOSEL 5.1 10/59] dmaengine: sprd: Fix the right place to configure 2-stage transfer Sasha Levin
  7 siblings, 0 replies; 8+ messages in thread
From: Sasha Levin @ 2019-06-14 20:27 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Eric Long, Baolin Wang, Vinod Koul, Sasha Levin, dmaengine

From: Eric Long <eric.long@unisoc.com>

[ Upstream commit 3d626a97f0303e9c30d063434b749de3f0f91fb5 ]

The 2-stage destination channel will be triggered by source channel
automatically, which means we should not trigger it by software request.

Signed-off-by: Eric Long <eric.long@unisoc.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/sprd-dma.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c
index 431e289d59a5..0f92e60529d1 100644
--- a/drivers/dma/sprd-dma.c
+++ b/drivers/dma/sprd-dma.c
@@ -510,7 +510,9 @@ static void sprd_dma_start(struct sprd_dma_chn *schan)
 	sprd_dma_set_uid(schan);
 	sprd_dma_enable_chn(schan);
 
-	if (schan->dev_id == SPRD_DMA_SOFTWARE_UID)
+	if (schan->dev_id == SPRD_DMA_SOFTWARE_UID &&
+	    schan->chn_mode != SPRD_DMA_DST_CHN0 &&
+	    schan->chn_mode != SPRD_DMA_DST_CHN1)
 		sprd_dma_soft_request(schan);
 }
 
-- 
2.20.1


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH AUTOSEL 5.1 09/59] dmaengine: sprd: Fix block length overflow
       [not found] <20190614202843.26941-1-sashal@kernel.org>
                   ` (5 preceding siblings ...)
  2019-06-14 20:27 ` [PATCH AUTOSEL 5.1 08/59] dmaengine: sprd: Fix the incorrect start for 2-stage destination channels Sasha Levin
@ 2019-06-14 20:27 ` Sasha Levin
  2019-06-14 20:27 ` [PATCH AUTOSEL 5.1 10/59] dmaengine: sprd: Fix the right place to configure 2-stage transfer Sasha Levin
  7 siblings, 0 replies; 8+ messages in thread
From: Sasha Levin @ 2019-06-14 20:27 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Eric Long, Baolin Wang, Vinod Koul, Sasha Levin, dmaengine

From: Eric Long <eric.long@unisoc.com>

[ Upstream commit 89d03b3c126d683f7b2cd5b07178493993d12448 ]

The maximum value of block length is 0xffff, so if the configured transfer length
is more than 0xffff, that will cause block length overflow to lead a configuration
error.

Thus we can set block length as the maximum burst length to avoid this issue, since
the maximum burst length will not be a big value which is more than 0xffff.

Signed-off-by: Eric Long <eric.long@unisoc.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/sprd-dma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c
index 0f92e60529d1..a01c23246632 100644
--- a/drivers/dma/sprd-dma.c
+++ b/drivers/dma/sprd-dma.c
@@ -778,7 +778,7 @@ static int sprd_dma_fill_desc(struct dma_chan *chan,
 	temp |= slave_cfg->src_maxburst & SPRD_DMA_FRG_LEN_MASK;
 	hw->frg_len = temp;
 
-	hw->blk_len = len & SPRD_DMA_BLK_LEN_MASK;
+	hw->blk_len = slave_cfg->src_maxburst & SPRD_DMA_BLK_LEN_MASK;
 	hw->trsc_len = len & SPRD_DMA_TRSC_LEN_MASK;
 
 	temp = (dst_step & SPRD_DMA_TRSF_STEP_MASK) << SPRD_DMA_DEST_TRSF_STEP_OFFSET;
-- 
2.20.1


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH AUTOSEL 5.1 10/59] dmaengine: sprd: Fix the right place to configure 2-stage transfer
       [not found] <20190614202843.26941-1-sashal@kernel.org>
                   ` (6 preceding siblings ...)
  2019-06-14 20:27 ` [PATCH AUTOSEL 5.1 09/59] dmaengine: sprd: Fix block length overflow Sasha Levin
@ 2019-06-14 20:27 ` Sasha Levin
  7 siblings, 0 replies; 8+ messages in thread
From: Sasha Levin @ 2019-06-14 20:27 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Eric Long, Baolin Wang, Vinod Koul, Sasha Levin, dmaengine

From: Eric Long <eric.long@unisoc.com>

[ Upstream commit c434e377dad1dec05cad1870ce21bc539e1e024f ]

Move the 2-stage configuration before configuring the link-list mode,
since we will use some 2-stage configuration to fill the link-list
configuration.

Signed-off-by: Eric Long <eric.long@unisoc.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/sprd-dma.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c
index a01c23246632..01abed5cde49 100644
--- a/drivers/dma/sprd-dma.c
+++ b/drivers/dma/sprd-dma.c
@@ -911,6 +911,12 @@ sprd_dma_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
 		schan->linklist.virt_addr = 0;
 	}
 
+	/* Set channel mode and trigger mode for 2-stage transfer */
+	schan->chn_mode =
+		(flags >> SPRD_DMA_CHN_MODE_SHIFT) & SPRD_DMA_CHN_MODE_MASK;
+	schan->trg_mode =
+		(flags >> SPRD_DMA_TRG_MODE_SHIFT) & SPRD_DMA_TRG_MODE_MASK;
+
 	sdesc = kzalloc(sizeof(*sdesc), GFP_NOWAIT);
 	if (!sdesc)
 		return NULL;
@@ -944,12 +950,6 @@ sprd_dma_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
 		}
 	}
 
-	/* Set channel mode and trigger mode for 2-stage transfer */
-	schan->chn_mode =
-		(flags >> SPRD_DMA_CHN_MODE_SHIFT) & SPRD_DMA_CHN_MODE_MASK;
-	schan->trg_mode =
-		(flags >> SPRD_DMA_TRG_MODE_SHIFT) & SPRD_DMA_TRG_MODE_MASK;
-
 	ret = sprd_dma_fill_desc(chan, &sdesc->chn_hw, 0, 0, src, dst, len,
 				 dir, flags, slave_cfg);
 	if (ret) {
-- 
2.20.1


^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, back to index

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <20190614202843.26941-1-sashal@kernel.org>
2019-06-14 20:27 ` [PATCH AUTOSEL 5.1 03/59] dmaengine: jz4780: Fix transfers being ACKed too soon Sasha Levin
2019-06-14 20:27 ` [PATCH AUTOSEL 5.1 04/59] dmaengine: dw-axi-dmac: fix null dereference when pointer first is null Sasha Levin
2019-06-14 20:27 ` [PATCH AUTOSEL 5.1 05/59] dmaengine: mediatek-cqdma: sleeping in atomic context Sasha Levin
2019-06-14 20:27 ` [PATCH AUTOSEL 5.1 06/59] dmaengine: sprd: Fix the possible crash when getting descriptor status Sasha Levin
2019-06-14 20:27 ` [PATCH AUTOSEL 5.1 07/59] dmaengine: sprd: Add validation of current descriptor in irq handler Sasha Levin
2019-06-14 20:27 ` [PATCH AUTOSEL 5.1 08/59] dmaengine: sprd: Fix the incorrect start for 2-stage destination channels Sasha Levin
2019-06-14 20:27 ` [PATCH AUTOSEL 5.1 09/59] dmaengine: sprd: Fix block length overflow Sasha Levin
2019-06-14 20:27 ` [PATCH AUTOSEL 5.1 10/59] dmaengine: sprd: Fix the right place to configure 2-stage transfer Sasha Levin

dmaengine Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/dmaengine/0 dmaengine/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dmaengine dmaengine/ https://lore.kernel.org/dmaengine \
		dmaengine@vger.kernel.org dmaengine@archiver.kernel.org
	public-inbox-index dmaengine


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.dmaengine


AGPL code for this site: git clone https://public-inbox.org/ public-inbox