dmaengine.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Maxime Ripard <maxime.ripard@bootlin.com>
To: Mark Rutland <mark.rutland@arm.com>,
	Rob Herring <robh+dt@kernel.org>,
	Frank Rowand <frowand.list@gmail.com>,
	Vinod Koul <vkoul@kernel.org>
Cc: devicetree@vger.kernel.org, dmaengine@vger.kernel.org,
	Chen-Yu Tsai <wens@csie.org>,
	Maxime Ripard <maxime.ripard@bootlin.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/3] dt-bindings: dma: Convert Allwinner A31 and A64 DMA to a schema
Date: Thu, 11 Jul 2019 11:21:58 +0200	[thread overview]
Message-ID: <20190711092158.14678-3-maxime.ripard@bootlin.com> (raw)
In-Reply-To: <20190711092158.14678-1-maxime.ripard@bootlin.com>

The newer Allwinner SoCs have a DMA controller supported in Linux, with a
matching Device Tree binding.

Now that we have the DT validation in place, let's convert the device tree
bindings for that controller over to a YAML schemas.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
 .../dma/allwinner,sun50i-a64-dma.yaml         | 88 +++++++++++++++++++
 .../bindings/dma/allwinner,sun6i-a31-dma.yaml | 62 +++++++++++++
 .../devicetree/bindings/dma/sun6i-dma.txt     | 81 -----------------
 3 files changed, 150 insertions(+), 81 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
 create mode 100644 Documentation/devicetree/bindings/dma/allwinner,sun6i-a31-dma.yaml
 delete mode 100644 Documentation/devicetree/bindings/dma/sun6i-dma.txt

diff --git a/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml b/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
new file mode 100644
index 000000000000..4cb9d6b93138
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/allwinner,sun50i-a64-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A64 DMA Controller Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <maxime.ripard@bootlin.com>
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  "#dma-cells":
+    const: 1
+    description: The cell is the request line number.
+
+  compatible:
+    enum:
+      - allwinner,sun50i-a64-dma
+      - allwinner,sun50i-h6-dma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mbus
+
+  resets:
+    maxItems: 1
+
+required:
+  - "#dma-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+  - dma-channels
+
+if:
+  properties:
+    compatible:
+      const: allwinner,sun50i-h6-dma
+
+then:
+  properties:
+    clocks:
+      maxItems: 2
+
+  required:
+    - clock-names
+
+else:
+  properties:
+    clocks:
+      maxItems: 1
+
+# FIXME: We should set it, but it would report all the generic
+# properties as additional properties.
+# additionalProperties: false
+
+examples:
+  - |
+    dma: dma-controller@1c02000 {
+        compatible = "allwinner,sun50i-a64-dma";
+        reg = <0x01c02000 0x1000>;
+        interrupts = <0 50 4>;
+        clocks = <&ccu 30>;
+        dma-channels = <8>;
+        dma-requests = <27>;
+        resets = <&ccu 7>;
+        #dma-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/allwinner,sun6i-a31-dma.yaml b/Documentation/devicetree/bindings/dma/allwinner,sun6i-a31-dma.yaml
new file mode 100644
index 000000000000..740b7f9b535b
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/allwinner,sun6i-a31-dma.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/allwinner,sun6i-a31-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 DMA Controller Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <maxime.ripard@bootlin.com>
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  "#dma-cells":
+    const: 1
+    description: The cell is the request line number.
+
+  compatible:
+    oneOf:
+      - const: allwinner,sun6i-a31-dma
+      - const: allwinner,sun8i-a23-dma
+      - const: allwinner,sun8i-a83t-dma
+      - const: allwinner,sun8i-h3-dma
+      - const: allwinner,sun8i-v3s-dma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - "#dma-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    dma: dma-controller@1c02000 {
+        compatible = "allwinner,sun6i-a31-dma";
+        reg = <0x01c02000 0x1000>;
+        interrupts = <0 50 4>;
+        clocks = <&ahb1_gates 6>;
+        resets = <&ahb1_rst 6>;
+        #dma-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/sun6i-dma.txt b/Documentation/devicetree/bindings/dma/sun6i-dma.txt
deleted file mode 100644
index cae31f4e77ba..000000000000
--- a/Documentation/devicetree/bindings/dma/sun6i-dma.txt
+++ /dev/null
@@ -1,81 +0,0 @@
-Allwinner A31 DMA Controller
-
-This driver follows the generic DMA bindings defined in dma.txt.
-
-Required properties:
-
-- compatible:	Must be one of
-		  "allwinner,sun6i-a31-dma"
-		  "allwinner,sun8i-a23-dma"
-		  "allwinner,sun8i-a83t-dma"
-		  "allwinner,sun8i-h3-dma"
-		  "allwinner,sun8i-v3s-dma"
-- reg:		Should contain the registers base address and length
-- interrupts:	Should contain a reference to the interrupt used by this device
-- clocks:	Should contain a reference to the parent AHB clock
-- resets:	Should contain a reference to the reset controller asserting
-		this device in reset
-- #dma-cells :	Should be 1, a single cell holding a line request number
-
-Example:
-	dma: dma-controller@1c02000 {
-		compatible = "allwinner,sun6i-a31-dma";
-		reg = <0x01c02000 0x1000>;
-		interrupts = <0 50 4>;
-		clocks = <&ahb1_gates 6>;
-		resets = <&ahb1_rst 6>;
-		#dma-cells = <1>;
-	};
-
-------------------------------------------------------------------------------
-For A64 and H6 DMA controller:
-
-Required properties:
-- compatible:	Must be one of
-		  "allwinner,sun50i-a64-dma"
-		  "allwinner,sun50i-h6-dma"
-- dma-channels: Number of DMA channels supported by the controller.
-		Refer to Documentation/devicetree/bindings/dma/dma.txt
-- clocks:	In addition to parent AHB clock, it should also contain mbus
-		clock (H6 only)
-- clock-names:	Should contain "bus" and "mbus" (H6 only)
-- all properties above, i.e. reg, interrupts, clocks, resets and #dma-cells
-
-Optional properties:
-- dma-requests: Number of DMA request signals supported by the controller.
-		Refer to Documentation/devicetree/bindings/dma/dma.txt
-
-Example:
-	dma: dma-controller@1c02000 {
-		compatible = "allwinner,sun50i-a64-dma";
-		reg = <0x01c02000 0x1000>;
-		interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&ccu CLK_BUS_DMA>;
-		dma-channels = <8>;
-		dma-requests = <27>;
-		resets = <&ccu RST_BUS_DMA>;
-		#dma-cells = <1>;
-	};
-------------------------------------------------------------------------------
-
-Clients:
-
-DMA clients connected to the A31 DMA controller must use the format
-described in the dma.txt file, using a two-cell specifier for each
-channel: a phandle plus one integer cells.
-The two cells in order are:
-
-1. A phandle pointing to the DMA controller.
-2. The port ID as specified in the datasheet
-
-Example:
-spi2: spi@1c6a000 {
-	compatible = "allwinner,sun6i-a31-spi";
-	reg = <0x01c6a000 0x1000>;
-	interrupts = <0 67 4>;
-	clocks = <&ahb1_gates 22>, <&spi2_clk>;
-	clock-names = "ahb", "mod";
-	dmas = <&dma 25>, <&dma 25>;
-	dma-names = "rx", "tx";
-	resets = <&ahb1_rst 22>;
-};
-- 
2.21.0


  parent reply	other threads:[~2019-07-11  9:36 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-11  9:21 [PATCH 1/3] dt-bindings: dma: Add YAML schemas for the generic DMA bindings Maxime Ripard
2019-07-11  9:21 ` [PATCH 2/3] dt-bindings: dma: Convert Allwinner A10 DMA to a schema Maxime Ripard
2019-07-12 13:09   ` Rob Herring
2019-07-11  9:21 ` Maxime Ripard [this message]
2019-07-12 13:07   ` [PATCH 3/3] dt-bindings: dma: Convert Allwinner A31 and A64 " Rob Herring
2019-07-11 17:33 ` [PATCH 1/3] dt-bindings: dma: Add YAML schemas for the generic DMA bindings Rob Herring
2019-07-12 21:27   ` Peter Ujfalusi
2019-07-12 21:49     ` Rob Herring
2019-07-20  6:41 Maxime Ripard
2019-07-20  6:41 ` [PATCH 3/3] dt-bindings: dma: Convert Allwinner A31 and A64 DMA to a schema Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190711092158.14678-3-maxime.ripard@bootlin.com \
    --to=maxime.ripard@bootlin.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dmaengine@vger.kernel.org \
    --cc=frowand.list@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=vkoul@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).