dmaengine Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH RESEND] dmaengine: tegra210-adma: Don't program FIFO threshold
@ 2019-07-31 10:16 Jon Hunter
  2019-07-31 15:17 ` Vinod Koul
  0 siblings, 1 reply; 2+ messages in thread
From: Jon Hunter @ 2019-07-31 10:16 UTC (permalink / raw)
  To: Laxman Dewangan, Vinod Koul, Thierry Reding
  Cc: dmaengine, linux-tegra, Sameer Pujar, Jonathan Hunter

From: Jonathan Hunter <jonathanh@nvidia.com>

The Tegra210 ADMA supports two modes for transferring data to a FIFO
which are ...

1. Transfer data to/from the FIFO as soon as a single burst can be
   transferred.
2. Transfer data to/from the FIFO based upon FIFO thresholds, where
   the FIFO threshold is specified in terms on multiple bursts.

Currently, the ADMA driver programs the FIFO threshold values in the
FIFO_CTRL register, but never enables the transfer mode that uses
these threshold values. Given that these have never been used so far,
simplify the ADMA driver by removing the programming of these threshold
values.

Signed-off-by: Jonathan Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
---
 drivers/dma/tegra210-adma.c | 12 ++----------
 1 file changed, 2 insertions(+), 10 deletions(-)

diff --git a/drivers/dma/tegra210-adma.c b/drivers/dma/tegra210-adma.c
index b33cf6e8ab8e..5f8adf5c1f20 100644
--- a/drivers/dma/tegra210-adma.c
+++ b/drivers/dma/tegra210-adma.c
@@ -42,12 +42,8 @@
 #define ADMA_CH_CONFIG_MAX_BUFS				8
 
 #define ADMA_CH_FIFO_CTRL				0x2c
-#define TEGRA210_ADMA_CH_FIFO_CTRL_OFLWTHRES(val)	(((val) & 0xf) << 24)
-#define TEGRA210_ADMA_CH_FIFO_CTRL_STRVTHRES(val)	(((val) & 0xf) << 16)
 #define TEGRA210_ADMA_CH_FIFO_CTRL_TXSIZE(val)		(((val) & 0xf) << 8)
 #define TEGRA210_ADMA_CH_FIFO_CTRL_RXSIZE(val)		((val) & 0xf)
-#define TEGRA186_ADMA_CH_FIFO_CTRL_OFLWTHRES(val)	(((val) & 0x1f) << 24)
-#define TEGRA186_ADMA_CH_FIFO_CTRL_STRVTHRES(val)	(((val) & 0x1f) << 16)
 #define TEGRA186_ADMA_CH_FIFO_CTRL_TXSIZE(val)		(((val) & 0x1f) << 8)
 #define TEGRA186_ADMA_CH_FIFO_CTRL_RXSIZE(val)		((val) & 0x1f)
 
@@ -64,14 +60,10 @@
 
 #define TEGRA_ADMA_BURST_COMPLETE_TIME			20
 
-#define TEGRA210_FIFO_CTRL_DEFAULT (TEGRA210_ADMA_CH_FIFO_CTRL_OFLWTHRES(1) | \
-				    TEGRA210_ADMA_CH_FIFO_CTRL_STRVTHRES(1) | \
-				    TEGRA210_ADMA_CH_FIFO_CTRL_TXSIZE(3)    | \
+#define TEGRA210_FIFO_CTRL_DEFAULT (TEGRA210_ADMA_CH_FIFO_CTRL_TXSIZE(3) | \
 				    TEGRA210_ADMA_CH_FIFO_CTRL_RXSIZE(3))
 
-#define TEGRA186_FIFO_CTRL_DEFAULT (TEGRA186_ADMA_CH_FIFO_CTRL_OFLWTHRES(1) | \
-				    TEGRA186_ADMA_CH_FIFO_CTRL_STRVTHRES(1) | \
-				    TEGRA186_ADMA_CH_FIFO_CTRL_TXSIZE(3)    | \
+#define TEGRA186_FIFO_CTRL_DEFAULT (TEGRA186_ADMA_CH_FIFO_CTRL_TXSIZE(3) | \
 				    TEGRA186_ADMA_CH_FIFO_CTRL_RXSIZE(3))
 
 #define ADMA_CH_REG_FIELD_VAL(val, mask, shift)	(((val) & mask) << shift)
-- 
2.17.1


^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [PATCH RESEND] dmaengine: tegra210-adma: Don't program FIFO threshold
  2019-07-31 10:16 [PATCH RESEND] dmaengine: tegra210-adma: Don't program FIFO threshold Jon Hunter
@ 2019-07-31 15:17 ` Vinod Koul
  0 siblings, 0 replies; 2+ messages in thread
From: Vinod Koul @ 2019-07-31 15:17 UTC (permalink / raw)
  To: Jon Hunter
  Cc: Laxman Dewangan, Thierry Reding, dmaengine, linux-tegra, Sameer Pujar

On 31-07-19, 11:16, Jon Hunter wrote:
> From: Jonathan Hunter <jonathanh@nvidia.com>
> 
> The Tegra210 ADMA supports two modes for transferring data to a FIFO
> which are ...
> 
> 1. Transfer data to/from the FIFO as soon as a single burst can be
>    transferred.
> 2. Transfer data to/from the FIFO based upon FIFO thresholds, where
>    the FIFO threshold is specified in terms on multiple bursts.
> 
> Currently, the ADMA driver programs the FIFO threshold values in the
> FIFO_CTRL register, but never enables the transfer mode that uses
> these threshold values. Given that these have never been used so far,
> simplify the ADMA driver by removing the programming of these threshold
> values.

Applied, thanks

-- 
~Vinod

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, back to index

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-07-31 10:16 [PATCH RESEND] dmaengine: tegra210-adma: Don't program FIFO threshold Jon Hunter
2019-07-31 15:17 ` Vinod Koul

dmaengine Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/dmaengine/0 dmaengine/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dmaengine dmaengine/ https://lore.kernel.org/dmaengine \
		dmaengine@vger.kernel.org dmaengine@archiver.kernel.org
	public-inbox-index dmaengine


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.dmaengine


AGPL code for this site: git clone https://public-inbox.org/ public-inbox