* [PATCH 1/7] [RFC] ARM: remove Intel iop33x and iop13xx support
[not found] <20190809162956.488941-1-arnd@arndb.de>
@ 2019-08-09 16:33 ` Arnd Bergmann
2019-08-09 16:33 ` [PATCH 2/7] dma: iop-adma: include prefetch.h Arnd Bergmann
` (7 more replies)
0 siblings, 8 replies; 21+ messages in thread
From: Arnd Bergmann @ 2019-08-09 16:33 UTC (permalink / raw)
To: soc
Cc: Arnd Bergmann, Russell King, Dan Williams, Vinod Koul,
Linus Walleij, Bartosz Golaszewski, linux-arm-kernel,
linux-kernel, dmaengine, linux-gpio, linux-i2c
There are three families of IOP machines we support in Linux: iop32x
(which includes EP80219), iop33x and iop13xx (aka IOP34x aka WP8134x).
All products we support in the kernel are based on the first of these,
iop32x, the other families only ever supported the Intel reference
boards but no actual machine anyone could ever buy.
While one could clearly make them all three work in a single kernel
with some work, this takes the easy way out, removing the later two
platforms entirely, under the assumption that there are no remaining
users.
Earlier versions of OpenWRT and Debian both had support for iop32x
but not the others, and they both dropped iop32x as well in their 2015
releases.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
I'm just guessing that iop32x is still needed, and the other two are
not. If anyone disagrees with that assessment, let me know so we
can come up with an alternative approach.
---
arch/arm/Kconfig | 30 -
arch/arm/Kconfig.debug | 8 +-
arch/arm/Makefile | 2 -
arch/arm/configs/iop13xx_defconfig | 118 --
arch/arm/configs/iop33x_defconfig | 85 --
arch/arm/mach-iop13xx/Kconfig | 21 -
arch/arm/mach-iop13xx/Makefile | 9 -
arch/arm/mach-iop13xx/Makefile.boot | 4 -
arch/arm/mach-iop13xx/include/mach/adma.h | 608 ---------
.../mach-iop13xx/include/mach/entry-macro.S | 29 -
arch/arm/mach-iop13xx/include/mach/hardware.h | 22 -
arch/arm/mach-iop13xx/include/mach/iop13xx.h | 508 --------
arch/arm/mach-iop13xx/include/mach/iq81340.h | 29 -
arch/arm/mach-iop13xx/include/mach/irqs.h | 195 ---
arch/arm/mach-iop13xx/include/mach/time.h | 127 --
.../mach-iop13xx/include/mach/uncompress.h | 23 -
arch/arm/mach-iop13xx/io.c | 77 --
arch/arm/mach-iop13xx/iq81340mc.c | 84 --
arch/arm/mach-iop13xx/iq81340sc.c | 86 --
arch/arm/mach-iop13xx/irq.c | 227 ----
arch/arm/mach-iop13xx/msi.c | 152 ---
arch/arm/mach-iop13xx/msi.h | 12 -
arch/arm/mach-iop13xx/pci.c | 1115 -----------------
arch/arm/mach-iop13xx/pci.h | 66 -
arch/arm/mach-iop13xx/setup.c | 595 ---------
arch/arm/mach-iop13xx/tpmi.c | 244 ----
arch/arm/mach-iop33x/Kconfig | 22 -
arch/arm/mach-iop33x/Makefile | 9 -
arch/arm/mach-iop33x/Makefile.boot | 4 -
arch/arm/mach-iop33x/include/mach/adma.h | 6 -
.../mach-iop33x/include/mach/entry-macro.S | 34 -
arch/arm/mach-iop33x/include/mach/hardware.h | 44 -
arch/arm/mach-iop33x/include/mach/iop33x.h | 37 -
arch/arm/mach-iop33x/include/mach/iq80331.h | 17 -
arch/arm/mach-iop33x/include/mach/iq80332.h | 17 -
arch/arm/mach-iop33x/include/mach/irqs.h | 57 -
arch/arm/mach-iop33x/include/mach/time.h | 5 -
.../arm/mach-iop33x/include/mach/uncompress.h | 37 -
arch/arm/mach-iop33x/iq80331.c | 148 ---
arch/arm/mach-iop33x/iq80332.c | 148 ---
arch/arm/mach-iop33x/irq.c | 115 --
arch/arm/mach-iop33x/uart.c | 100 --
arch/arm/plat-iop/Makefile | 14 -
arch/arm/plat-iop/adma.c | 32 +-
arch/arm/plat-iop/i2c.c | 17 +-
arch/arm/plat-iop/pmu.c | 6 -
drivers/dma/Kconfig | 2 +-
drivers/gpio/Kconfig | 2 +-
drivers/i2c/busses/Kconfig | 2 +-
49 files changed, 9 insertions(+), 5342 deletions(-)
delete mode 100644 arch/arm/configs/iop13xx_defconfig
delete mode 100644 arch/arm/configs/iop33x_defconfig
delete mode 100644 arch/arm/mach-iop13xx/Kconfig
delete mode 100644 arch/arm/mach-iop13xx/Makefile
delete mode 100644 arch/arm/mach-iop13xx/Makefile.boot
delete mode 100644 arch/arm/mach-iop13xx/include/mach/adma.h
delete mode 100644 arch/arm/mach-iop13xx/include/mach/entry-macro.S
delete mode 100644 arch/arm/mach-iop13xx/include/mach/hardware.h
delete mode 100644 arch/arm/mach-iop13xx/include/mach/iop13xx.h
delete mode 100644 arch/arm/mach-iop13xx/include/mach/iq81340.h
delete mode 100644 arch/arm/mach-iop13xx/include/mach/irqs.h
delete mode 100644 arch/arm/mach-iop13xx/include/mach/time.h
delete mode 100644 arch/arm/mach-iop13xx/include/mach/uncompress.h
delete mode 100644 arch/arm/mach-iop13xx/io.c
delete mode 100644 arch/arm/mach-iop13xx/iq81340mc.c
delete mode 100644 arch/arm/mach-iop13xx/iq81340sc.c
delete mode 100644 arch/arm/mach-iop13xx/irq.c
delete mode 100644 arch/arm/mach-iop13xx/msi.c
delete mode 100644 arch/arm/mach-iop13xx/msi.h
delete mode 100644 arch/arm/mach-iop13xx/pci.c
delete mode 100644 arch/arm/mach-iop13xx/pci.h
delete mode 100644 arch/arm/mach-iop13xx/setup.c
delete mode 100644 arch/arm/mach-iop13xx/tpmi.c
delete mode 100644 arch/arm/mach-iop33x/Kconfig
delete mode 100644 arch/arm/mach-iop33x/Makefile
delete mode 100644 arch/arm/mach-iop33x/Makefile.boot
delete mode 100644 arch/arm/mach-iop33x/include/mach/adma.h
delete mode 100644 arch/arm/mach-iop33x/include/mach/entry-macro.S
delete mode 100644 arch/arm/mach-iop33x/include/mach/hardware.h
delete mode 100644 arch/arm/mach-iop33x/include/mach/iop33x.h
delete mode 100644 arch/arm/mach-iop33x/include/mach/iq80331.h
delete mode 100644 arch/arm/mach-iop33x/include/mach/iq80332.h
delete mode 100644 arch/arm/mach-iop33x/include/mach/irqs.h
delete mode 100644 arch/arm/mach-iop33x/include/mach/time.h
delete mode 100644 arch/arm/mach-iop33x/include/mach/uncompress.h
delete mode 100644 arch/arm/mach-iop33x/iq80331.c
delete mode 100644 arch/arm/mach-iop33x/iq80332.c
delete mode 100644 arch/arm/mach-iop33x/irq.c
delete mode 100644 arch/arm/mach-iop33x/uart.c
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 33b00579beff..0009f6b109fd 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -263,7 +263,6 @@ config PHYS_OFFSET
default 0x00000000 if ARCH_EBSA110 || \
ARCH_FOOTBRIDGE || \
ARCH_INTEGRATOR || \
- ARCH_IOP13XX || \
ARCH_KS8695 || \
ARCH_REALVIEW
default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
@@ -377,19 +376,6 @@ config ARCH_FOOTBRIDGE
Support for systems based on the DC21285 companion chip
("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
-config ARCH_IOP13XX
- bool "IOP13xx-based"
- depends on MMU
- select CPU_XSC3
- select NEED_MACH_MEMORY_H
- select NEED_RET_TO_USER
- select FORCE_PCI
- select PLAT_IOP
- select VMSPLIT_1G
- select SPARSE_IRQ
- help
- Support for Intel's IOP13XX (XScale) family of processors.
-
config ARCH_IOP32X
bool "IOP32x-based"
depends on MMU
@@ -403,18 +389,6 @@ config ARCH_IOP32X
Support for Intel's 80219 and IOP32X (XScale) family of
processors.
-config ARCH_IOP33X
- bool "IOP33x-based"
- depends on MMU
- select CPU_XSCALE
- select GPIO_IOP
- select GPIOLIB
- select NEED_RET_TO_USER
- select FORCE_PCI
- select PLAT_IOP
- help
- Support for Intel's IOP33X (XScale) family of processors.
-
config ARCH_IXP4XX
bool "IXP4xx-based"
depends on MMU
@@ -734,12 +708,8 @@ source "arch/arm/mach-imx/Kconfig"
source "arch/arm/mach-integrator/Kconfig"
-source "arch/arm/mach-iop13xx/Kconfig"
-
source "arch/arm/mach-iop32x/Kconfig"
-source "arch/arm/mach-iop33x/Kconfig"
-
source "arch/arm/mach-ixp4xx/Kconfig"
source "arch/arm/mach-keystone/Kconfig"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 85710e078afb..0e2bb9ee404b 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1568,9 +1568,7 @@ config DEBUG_UART_PL01X
# Compatibility options for 8250
config DEBUG_UART_8250
- def_bool ARCH_EBSA110 || \
- ARCH_IOP13XX || ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX || \
- ARCH_RPC
+ def_bool ARCH_EBSA110 || ARCH_IOP32X || ARCH_IXP4XX || ARCH_RPC
config DEBUG_UART_PHYS
hex "Physical base address of debug UART"
@@ -1683,7 +1681,6 @@ config DEBUG_UART_PHYS
default 0xffc02000 if DEBUG_SOCFPGA_UART0
default 0xffc02100 if DEBUG_SOCFPGA_ARRIA10_UART1
default 0xffc03000 if DEBUG_SOCFPGA_CYCLONE5_UART1
- default 0xffd82340 if ARCH_IOP13XX
default 0xffe40000 if DEBUG_RCAR_GEN1_SCIF0
default 0xffe42000 if DEBUG_RCAR_GEN1_SCIF2
default 0xfff36000 if DEBUG_HIGHBANK_UART
@@ -1693,7 +1690,6 @@ config DEBUG_UART_PHYS
default 0xfffe8600 if DEBUG_BCM63XX_UART
default 0xffffee00 if DEBUG_AT91_SAM9263_DBGU
default 0xfffff200 if DEBUG_AT91_RM9200_DBGU
- default 0xfffff700 if ARCH_IOP33X
depends on ARCH_EP93XX || \
DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
DEBUG_LL_UART_EFM32 || \
@@ -1805,14 +1801,12 @@ config DEBUG_UART_VIRT
default 0xfedc0000 if DEBUG_EP93XX
default 0xfee003f8 if DEBUG_FOOTBRIDGE_COM1
default 0xfee20000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
- default 0xfee82340 if ARCH_IOP13XX
default 0xfef00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
default 0xfef00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
default 0xfef36000 if DEBUG_HIGHBANK_UART
default 0xfefb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
default 0xfefb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
default 0xfefb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
- default 0xfefff700 if ARCH_IOP33X
default 0xff003000 if DEBUG_U300_UART
default 0xffd01000 if DEBUG_HIP01_UART
default DEBUG_UART_PHYS if !MMU
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c3624ca6c0bc..d92bc5328df7 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -173,9 +173,7 @@ machine-$(CONFIG_ARCH_GEMINI) += gemini
machine-$(CONFIG_ARCH_HIGHBANK) += highbank
machine-$(CONFIG_ARCH_HISI) += hisi
machine-$(CONFIG_ARCH_INTEGRATOR) += integrator
-machine-$(CONFIG_ARCH_IOP13XX) += iop13xx
machine-$(CONFIG_ARCH_IOP32X) += iop32x
-machine-$(CONFIG_ARCH_IOP33X) += iop33x
machine-$(CONFIG_ARCH_IXP4XX) += ixp4xx
machine-$(CONFIG_ARCH_KEYSTONE) += keystone
machine-$(CONFIG_ARCH_KS8695) += ks8695
diff --git a/arch/arm/configs/iop13xx_defconfig b/arch/arm/configs/iop13xx_defconfig
deleted file mode 100644
index 30cdb287e1b4..000000000000
--- a/arch/arm/configs/iop13xx_defconfig
+++ /dev/null
@@ -1,118 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_IOP13XX=y
-CONFIG_MACH_IQ81340SC=y
-CONFIG_MACH_IQ81340MC=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="ip=bootp root=nfs console=ttyS0,115200 nfsroot=,tcp,v3,wsize=8192,rsize=8192"
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IPV6=y
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_IPV6_SIT is not set
-CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=2
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_ISCSI_ATTRS=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-CONFIG_MD_RAID10=y
-CONFIG_MD_RAID456=y
-CONFIG_BLK_DEV_DM=y
-CONFIG_NETDEVICES=y
-CONFIG_E1000=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_IOP3XX=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DMADEVICES=y
-CONFIG_INTEL_IOP_ADMA=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_TMPFS=y
-CONFIG_ECRYPT_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-CONFIG_SMB_FS=m
-CONFIG_CIFS=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS=y
-CONFIG_DEBUG_USER=y
-CONFIG_KEYS=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_LRW=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=y
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_TGR192=y
-CONFIG_CRYPTO_WP512=y
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_ANUBIS=y
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_CAST5=y
-CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_KHAZAD=y
-CONFIG_CRYPTO_SERPENT=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRC_CCITT=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/iop33x_defconfig b/arch/arm/configs/iop33x_defconfig
deleted file mode 100644
index 089eca43214a..000000000000
--- a/arch/arm/configs/iop33x_defconfig
+++ /dev/null
@@ -1,85 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_IOP33X=y
-CONFIG_ARCH_IQ80331=y
-CONFIG_MACH_IQ80332=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp cachepolicy=writealloc iop3xx_init_atu=y"
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IPV6=y
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_IPV6_SIT is not set
-CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_LINEAR=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-CONFIG_MD_RAID456=y
-CONFIG_BLK_DEV_DM=y
-CONFIG_NETDEVICES=y
-CONFIG_E1000=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_IOP3XX=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DMADEVICES=y
-CONFIG_INTEL_IOP_ADMA=y
-CONFIG_NET_DMA=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_UART_8250=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRC32 is not set
diff --git a/arch/arm/mach-iop13xx/Kconfig b/arch/arm/mach-iop13xx/Kconfig
deleted file mode 100644
index c4f04070b4c1..000000000000
--- a/arch/arm/mach-iop13xx/Kconfig
+++ /dev/null
@@ -1,21 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-if ARCH_IOP13XX
-
-menu "IOP13XX Implementation Options"
-
-comment "IOP13XX Platform Support"
-
-config MACH_IQ81340SC
- bool "Enable IQ81340SC Hardware Support"
- help
- Say Y here if you want to support running on the Intel IQ81340SC
- evaluation kit.
-
-config MACH_IQ81340MC
- bool "Enable IQ81340MC Hardware Support"
- help
- Say Y here if you want to support running on the Intel IQ81340MC
- evaluation kit.
-
-endmenu
-endif
diff --git a/arch/arm/mach-iop13xx/Makefile b/arch/arm/mach-iop13xx/Makefile
deleted file mode 100644
index 5757c8f6e371..000000000000
--- a/arch/arm/mach-iop13xx/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_ARCH_IOP13XX) += setup.o
-obj-$(CONFIG_ARCH_IOP13XX) += irq.o
-obj-$(CONFIG_ARCH_IOP13XX) += pci.o
-obj-$(CONFIG_ARCH_IOP13XX) += io.o
-obj-$(CONFIG_ARCH_IOP13XX) += tpmi.o
-obj-$(CONFIG_MACH_IQ81340SC) += iq81340sc.o
-obj-$(CONFIG_MACH_IQ81340MC) += iq81340mc.o
-obj-$(CONFIG_PCI_MSI) += msi.o
diff --git a/arch/arm/mach-iop13xx/Makefile.boot b/arch/arm/mach-iop13xx/Makefile.boot
deleted file mode 100644
index 4f29554c8401..000000000000
--- a/arch/arm/mach-iop13xx/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
- zreladdr-y += 0x00008000
-params_phys-y := 0x00000100
-initrd_phys-y := 0x00800000
diff --git a/arch/arm/mach-iop13xx/include/mach/adma.h b/arch/arm/mach-iop13xx/include/mach/adma.h
deleted file mode 100644
index 51d206f5b093..000000000000
--- a/arch/arm/mach-iop13xx/include/mach/adma.h
+++ /dev/null
@@ -1,608 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright(c) 2006, Intel Corporation.
- */
-#ifndef _ADMA_H
-#define _ADMA_H
-#include <linux/types.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/hardware/iop_adma.h>
-
-#define ADMA_ACCR(chan) (chan->mmr_base + 0x0)
-#define ADMA_ACSR(chan) (chan->mmr_base + 0x4)
-#define ADMA_ADAR(chan) (chan->mmr_base + 0x8)
-#define ADMA_IIPCR(chan) (chan->mmr_base + 0x18)
-#define ADMA_IIPAR(chan) (chan->mmr_base + 0x1c)
-#define ADMA_IIPUAR(chan) (chan->mmr_base + 0x20)
-#define ADMA_ANDAR(chan) (chan->mmr_base + 0x24)
-#define ADMA_ADCR(chan) (chan->mmr_base + 0x28)
-#define ADMA_CARMD(chan) (chan->mmr_base + 0x2c)
-#define ADMA_ABCR(chan) (chan->mmr_base + 0x30)
-#define ADMA_DLADR(chan) (chan->mmr_base + 0x34)
-#define ADMA_DUADR(chan) (chan->mmr_base + 0x38)
-#define ADMA_SLAR(src, chan) (chan->mmr_base + (0x3c + (src << 3)))
-#define ADMA_SUAR(src, chan) (chan->mmr_base + (0x40 + (src << 3)))
-
-struct iop13xx_adma_src {
- u32 src_addr;
- union {
- u32 upper_src_addr;
- struct {
- unsigned int pq_upper_src_addr:24;
- unsigned int pq_dmlt:8;
- };
- };
-};
-
-struct iop13xx_adma_desc_ctrl {
- unsigned int int_en:1;
- unsigned int xfer_dir:2;
- unsigned int src_select:4;
- unsigned int zero_result:1;
- unsigned int block_fill_en:1;
- unsigned int crc_gen_en:1;
- unsigned int crc_xfer_dis:1;
- unsigned int crc_seed_fetch_dis:1;
- unsigned int status_write_back_en:1;
- unsigned int endian_swap_en:1;
- unsigned int reserved0:2;
- unsigned int pq_update_xfer_en:1;
- unsigned int dual_xor_en:1;
- unsigned int pq_xfer_en:1;
- unsigned int p_xfer_dis:1;
- unsigned int reserved1:10;
- unsigned int relax_order_en:1;
- unsigned int no_snoop_en:1;
-};
-
-struct iop13xx_adma_byte_count {
- unsigned int byte_count:24;
- unsigned int host_if:3;
- unsigned int reserved:2;
- unsigned int zero_result_err_q:1;
- unsigned int zero_result_err:1;
- unsigned int tx_complete:1;
-};
-
-struct iop13xx_adma_desc_hw {
- u32 next_desc;
- union {
- u32 desc_ctrl;
- struct iop13xx_adma_desc_ctrl desc_ctrl_field;
- };
- union {
- u32 crc_addr;
- u32 block_fill_data;
- u32 q_dest_addr;
- };
- union {
- u32 byte_count;
- struct iop13xx_adma_byte_count byte_count_field;
- };
- union {
- u32 dest_addr;
- u32 p_dest_addr;
- };
- union {
- u32 upper_dest_addr;
- u32 pq_upper_dest_addr;
- };
- struct iop13xx_adma_src src[1];
-};
-
-struct iop13xx_adma_desc_dual_xor {
- u32 next_desc;
- u32 desc_ctrl;
- u32 reserved;
- u32 byte_count;
- u32 h_dest_addr;
- u32 h_upper_dest_addr;
- u32 src0_addr;
- u32 upper_src0_addr;
- u32 src1_addr;
- u32 upper_src1_addr;
- u32 h_src_addr;
- u32 h_upper_src_addr;
- u32 d_src_addr;
- u32 d_upper_src_addr;
- u32 d_dest_addr;
- u32 d_upper_dest_addr;
-};
-
-struct iop13xx_adma_desc_pq_update {
- u32 next_desc;
- u32 desc_ctrl;
- u32 reserved;
- u32 byte_count;
- u32 p_dest_addr;
- u32 p_upper_dest_addr;
- u32 src0_addr;
- u32 upper_src0_addr;
- u32 src1_addr;
- u32 upper_src1_addr;
- u32 p_src_addr;
- u32 p_upper_src_addr;
- u32 q_src_addr;
- struct {
- unsigned int q_upper_src_addr:24;
- unsigned int q_dmlt:8;
- };
- u32 q_dest_addr;
- u32 q_upper_dest_addr;
-};
-
-static inline int iop_adma_get_max_xor(void)
-{
- return 16;
-}
-
-#define iop_adma_get_max_pq iop_adma_get_max_xor
-
-static inline u32 iop_chan_get_current_descriptor(struct iop_adma_chan *chan)
-{
- return __raw_readl(ADMA_ADAR(chan));
-}
-
-static inline void iop_chan_set_next_descriptor(struct iop_adma_chan *chan,
- u32 next_desc_addr)
-{
- __raw_writel(next_desc_addr, ADMA_ANDAR(chan));
-}
-
-#define ADMA_STATUS_BUSY (1 << 13)
-
-static inline char iop_chan_is_busy(struct iop_adma_chan *chan)
-{
- if (__raw_readl(ADMA_ACSR(chan)) &
- ADMA_STATUS_BUSY)
- return 1;
- else
- return 0;
-}
-
-static inline int
-iop_chan_get_desc_align(struct iop_adma_chan *chan, int num_slots)
-{
- return 1;
-}
-#define iop_desc_is_aligned(x, y) 1
-
-static inline int
-iop_chan_memcpy_slot_count(size_t len, int *slots_per_op)
-{
- *slots_per_op = 1;
- return 1;
-}
-
-#define iop_chan_interrupt_slot_count(s, c) iop_chan_memcpy_slot_count(0, s)
-
-static inline int
-iop_chan_memset_slot_count(size_t len, int *slots_per_op)
-{
- *slots_per_op = 1;
- return 1;
-}
-
-static inline int
-iop_chan_xor_slot_count(size_t len, int src_cnt, int *slots_per_op)
-{
- static const char slot_count_table[] = { 1, 2, 2, 2,
- 2, 3, 3, 3,
- 3, 4, 4, 4,
- 4, 5, 5, 5,
- };
- *slots_per_op = slot_count_table[src_cnt - 1];
- return *slots_per_op;
-}
-
-#define ADMA_MAX_BYTE_COUNT (16 * 1024 * 1024)
-#define IOP_ADMA_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
-#define IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
-#define IOP_ADMA_XOR_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
-#define IOP_ADMA_PQ_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
-#define iop_chan_zero_sum_slot_count(l, s, o) iop_chan_xor_slot_count(l, s, o)
-#define iop_chan_pq_slot_count iop_chan_xor_slot_count
-#define iop_chan_pq_zero_sum_slot_count iop_chan_xor_slot_count
-
-static inline u32 iop_desc_get_byte_count(struct iop_adma_desc_slot *desc,
- struct iop_adma_chan *chan)
-{
- struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
- return hw_desc->byte_count_field.byte_count;
-}
-
-static inline u32 iop_desc_get_src_addr(struct iop_adma_desc_slot *desc,
- struct iop_adma_chan *chan,
- int src_idx)
-{
- struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
- return hw_desc->src[src_idx].src_addr;
-}
-
-static inline u32 iop_desc_get_src_count(struct iop_adma_desc_slot *desc,
- struct iop_adma_chan *chan)
-{
- struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
- return hw_desc->desc_ctrl_field.src_select + 1;
-}
-
-static inline void
-iop_desc_init_memcpy(struct iop_adma_desc_slot *desc, unsigned long flags)
-{
- struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
- union {
- u32 value;
- struct iop13xx_adma_desc_ctrl field;
- } u_desc_ctrl;
-
- u_desc_ctrl.value = 0;
- u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
- u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
- hw_desc->desc_ctrl = u_desc_ctrl.value;
- hw_desc->crc_addr = 0;
-}
-
-static inline void
-iop_desc_init_memset(struct iop_adma_desc_slot *desc, unsigned long flags)
-{
- struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
- union {
- u32 value;
- struct iop13xx_adma_desc_ctrl field;
- } u_desc_ctrl;
-
- u_desc_ctrl.value = 0;
- u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
- u_desc_ctrl.field.block_fill_en = 1;
- u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
- hw_desc->desc_ctrl = u_desc_ctrl.value;
- hw_desc->crc_addr = 0;
-}
-
-/* to do: support buffers larger than ADMA_MAX_BYTE_COUNT */
-static inline void
-iop_desc_init_xor(struct iop_adma_desc_slot *desc, int src_cnt,
- unsigned long flags)
-{
- struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
- union {
- u32 value;
- struct iop13xx_adma_desc_ctrl field;
- } u_desc_ctrl;
-
- u_desc_ctrl.value = 0;
- u_desc_ctrl.field.src_select = src_cnt - 1;
- u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
- u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
- hw_desc->desc_ctrl = u_desc_ctrl.value;
- hw_desc->crc_addr = 0;
-
-}
-#define iop_desc_init_null_xor(d, s, i) iop_desc_init_xor(d, s, i)
-
-/* to do: support buffers larger than ADMA_MAX_BYTE_COUNT */
-static inline int
-iop_desc_init_zero_sum(struct iop_adma_desc_slot *desc, int src_cnt,
- unsigned long flags)
-{
- struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
- union {
- u32 value;
- struct iop13xx_adma_desc_ctrl field;
- } u_desc_ctrl;
-
- u_desc_ctrl.value = 0;
- u_desc_ctrl.field.src_select = src_cnt - 1;
- u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
- u_desc_ctrl.field.zero_result = 1;
- u_desc_ctrl.field.status_write_back_en = 1;
- u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
- hw_desc->desc_ctrl = u_desc_ctrl.value;
- hw_desc->crc_addr = 0;
-
- return 1;
-}
-
-static inline void
-iop_desc_init_pq(struct iop_adma_desc_slot *desc, int src_cnt,
- unsigned long flags)
-{
- struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
- union {
- u32 value;
- struct iop13xx_adma_desc_ctrl field;
- } u_desc_ctrl;
-
- u_desc_ctrl.value = 0;
- u_desc_ctrl.field.src_select = src_cnt - 1;
- u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
- u_desc_ctrl.field.pq_xfer_en = 1;
- u_desc_ctrl.field.p_xfer_dis = !!(flags & DMA_PREP_PQ_DISABLE_P);
- u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
- hw_desc->desc_ctrl = u_desc_ctrl.value;
-}
-
-static inline void
-iop_desc_init_pq_zero_sum(struct iop_adma_desc_slot *desc, int src_cnt,
- unsigned long flags)
-{
- struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
- union {
- u32 value;
- struct iop13xx_adma_desc_ctrl field;
- } u_desc_ctrl;
-
- u_desc_ctrl.value = 0;
- u_desc_ctrl.field.src_select = src_cnt - 1;
- u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
- u_desc_ctrl.field.zero_result = 1;
- u_desc_ctrl.field.status_write_back_en = 1;
- u_desc_ctrl.field.pq_xfer_en = 1;
- u_desc_ctrl.field.p_xfer_dis = !!(flags & DMA_PREP_PQ_DISABLE_P);
- u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
- hw_desc->desc_ctrl = u_desc_ctrl.value;
-}
-
-static inline void iop_desc_set_byte_count(struct iop_adma_desc_slot *desc,
- struct iop_adma_chan *chan,
- u32 byte_count)
-{
- struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
- hw_desc->byte_count = byte_count;
-}
-
-static inline void
-iop_desc_set_zero_sum_byte_count(struct iop_adma_desc_slot *desc, u32 len)
-{
- int slots_per_op = desc->slots_per_op;
- struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc, *iter;
- int i = 0;
-
- if (len <= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT) {
- hw_desc->byte_count = len;
- } else {
- do {
- iter = iop_hw_desc_slot_idx(hw_desc, i);
- iter->byte_count = IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT;
- len -= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT;
- i += slots_per_op;
- } while (len > IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT);
-
- if (len) {
- iter = iop_hw_desc_slot_idx(hw_desc, i);
- iter->byte_count = len;
- }
- }
-}
-
-#define iop_desc_set_pq_zero_sum_byte_count iop_desc_set_zero_sum_byte_count
-
-static inline void iop_desc_set_dest_addr(struct iop_adma_desc_slot *desc,
- struct iop_adma_chan *chan,
- dma_addr_t addr)
-{
- struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
- hw_desc->dest_addr = addr;
- hw_desc->upper_dest_addr = 0;
-}
-
-static inline void
-iop_desc_set_pq_addr(struct iop_adma_desc_slot *desc, dma_addr_t *addr)
-{
- struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-
- hw_desc->dest_addr = addr[0];
- hw_desc->q_dest_addr = addr[1];
- hw_desc->upper_dest_addr = 0;
-}
-
-static inline void iop_desc_set_memcpy_src_addr(struct iop_adma_desc_slot *desc,
- dma_addr_t addr)
-{
- struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
- hw_desc->src[0].src_addr = addr;
- hw_desc->src[0].upper_src_addr = 0;
-}
-
-static inline void iop_desc_set_xor_src_addr(struct iop_adma_desc_slot *desc,
- int src_idx, dma_addr_t addr)
-{
- int slot_cnt = desc->slot_cnt, slots_per_op = desc->slots_per_op;
- struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc, *iter;
- int i = 0;
-
- do {
- iter = iop_hw_desc_slot_idx(hw_desc, i);
- iter->src[src_idx].src_addr = addr;
- iter->src[src_idx].upper_src_addr = 0;
- slot_cnt -= slots_per_op;
- if (slot_cnt) {
- i += slots_per_op;
- addr += IOP_ADMA_XOR_MAX_BYTE_COUNT;
- }
- } while (slot_cnt);
-}
-
-static inline void
-iop_desc_set_pq_src_addr(struct iop_adma_desc_slot *desc, int src_idx,
- dma_addr_t addr, unsigned char coef)
-{
- int slot_cnt = desc->slot_cnt, slots_per_op = desc->slots_per_op;
- struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc, *iter;
- struct iop13xx_adma_src *src;
- int i = 0;
-
- do {
- iter = iop_hw_desc_slot_idx(hw_desc, i);
- src = &iter->src[src_idx];
- src->src_addr = addr;
- src->pq_upper_src_addr = 0;
- src->pq_dmlt = coef;
- slot_cnt -= slots_per_op;
- if (slot_cnt) {
- i += slots_per_op;
- addr += IOP_ADMA_PQ_MAX_BYTE_COUNT;
- }
- } while (slot_cnt);
-}
-
-static inline void
-iop_desc_init_interrupt(struct iop_adma_desc_slot *desc,
- struct iop_adma_chan *chan)
-{
- iop_desc_init_memcpy(desc, 1);
- iop_desc_set_byte_count(desc, chan, 0);
- iop_desc_set_dest_addr(desc, chan, 0);
- iop_desc_set_memcpy_src_addr(desc, 0);
-}
-
-#define iop_desc_set_zero_sum_src_addr iop_desc_set_xor_src_addr
-#define iop_desc_set_pq_zero_sum_src_addr iop_desc_set_pq_src_addr
-
-static inline void
-iop_desc_set_pq_zero_sum_addr(struct iop_adma_desc_slot *desc, int pq_idx,
- dma_addr_t *src)
-{
- iop_desc_set_xor_src_addr(desc, pq_idx, src[pq_idx]);
- iop_desc_set_xor_src_addr(desc, pq_idx+1, src[pq_idx+1]);
-}
-
-static inline void iop_desc_set_next_desc(struct iop_adma_desc_slot *desc,
- u32 next_desc_addr)
-{
- struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-
- iop_paranoia(hw_desc->next_desc);
- hw_desc->next_desc = next_desc_addr;
-}
-
-static inline u32 iop_desc_get_next_desc(struct iop_adma_desc_slot *desc)
-{
- struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
- return hw_desc->next_desc;
-}
-
-static inline void iop_desc_clear_next_desc(struct iop_adma_desc_slot *desc)
-{
- struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
- hw_desc->next_desc = 0;
-}
-
-static inline void iop_desc_set_block_fill_val(struct iop_adma_desc_slot *desc,
- u32 val)
-{
- struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
- hw_desc->block_fill_data = val;
-}
-
-static inline enum sum_check_flags
-iop_desc_get_zero_result(struct iop_adma_desc_slot *desc)
-{
- struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
- struct iop13xx_adma_desc_ctrl desc_ctrl = hw_desc->desc_ctrl_field;
- struct iop13xx_adma_byte_count byte_count = hw_desc->byte_count_field;
- enum sum_check_flags flags;
-
- BUG_ON(!(byte_count.tx_complete && desc_ctrl.zero_result));
-
- flags = byte_count.zero_result_err_q << SUM_CHECK_Q;
- flags |= byte_count.zero_result_err << SUM_CHECK_P;
-
- return flags;
-}
-
-static inline void iop_chan_append(struct iop_adma_chan *chan)
-{
- u32 adma_accr;
-
- adma_accr = __raw_readl(ADMA_ACCR(chan));
- adma_accr |= 0x2;
- __raw_writel(adma_accr, ADMA_ACCR(chan));
-}
-
-static inline u32 iop_chan_get_status(struct iop_adma_chan *chan)
-{
- return __raw_readl(ADMA_ACSR(chan));
-}
-
-static inline void iop_chan_disable(struct iop_adma_chan *chan)
-{
- u32 adma_chan_ctrl = __raw_readl(ADMA_ACCR(chan));
- adma_chan_ctrl &= ~0x1;
- __raw_writel(adma_chan_ctrl, ADMA_ACCR(chan));
-}
-
-static inline void iop_chan_enable(struct iop_adma_chan *chan)
-{
- u32 adma_chan_ctrl;
-
- adma_chan_ctrl = __raw_readl(ADMA_ACCR(chan));
- adma_chan_ctrl |= 0x1;
- __raw_writel(adma_chan_ctrl, ADMA_ACCR(chan));
-}
-
-static inline void iop_adma_device_clear_eot_status(struct iop_adma_chan *chan)
-{
- u32 status = __raw_readl(ADMA_ACSR(chan));
- status &= (1 << 12);
- __raw_writel(status, ADMA_ACSR(chan));
-}
-
-static inline void iop_adma_device_clear_eoc_status(struct iop_adma_chan *chan)
-{
- u32 status = __raw_readl(ADMA_ACSR(chan));
- status &= (1 << 11);
- __raw_writel(status, ADMA_ACSR(chan));
-}
-
-static inline void iop_adma_device_clear_err_status(struct iop_adma_chan *chan)
-{
- u32 status = __raw_readl(ADMA_ACSR(chan));
- status &= (1 << 9) | (1 << 5) | (1 << 4) | (1 << 3);
- __raw_writel(status, ADMA_ACSR(chan));
-}
-
-static inline int
-iop_is_err_int_parity(unsigned long status, struct iop_adma_chan *chan)
-{
- return test_bit(9, &status);
-}
-
-static inline int
-iop_is_err_mcu_abort(unsigned long status, struct iop_adma_chan *chan)
-{
- return test_bit(5, &status);
-}
-
-static inline int
-iop_is_err_int_tabort(unsigned long status, struct iop_adma_chan *chan)
-{
- return test_bit(4, &status);
-}
-
-static inline int
-iop_is_err_int_mabort(unsigned long status, struct iop_adma_chan *chan)
-{
- return test_bit(3, &status);
-}
-
-static inline int
-iop_is_err_pci_tabort(unsigned long status, struct iop_adma_chan *chan)
-{
- return 0;
-}
-
-static inline int
-iop_is_err_pci_mabort(unsigned long status, struct iop_adma_chan *chan)
-{
- return 0;
-}
-
-static inline int
-iop_is_err_split_tx(unsigned long status, struct iop_adma_chan *chan)
-{
- return 0;
-}
-
-#endif /* _ADMA_H */
diff --git a/arch/arm/mach-iop13xx/include/mach/entry-macro.S b/arch/arm/mach-iop13xx/include/mach/entry-macro.S
deleted file mode 100644
index 9f4ecb8861bd..000000000000
--- a/arch/arm/mach-iop13xx/include/mach/entry-macro.S
+++ /dev/null
@@ -1,29 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * iop13xx low level irq macros
- * Copyright (c) 2005-2006, Intel Corporation.
- */
- .macro get_irqnr_preamble, base, tmp
- mrc p15, 0, \tmp, c15, c1, 0
- orr \tmp, \tmp, #(1 << 6)
- mcr p15, 0, \tmp, c15, c1, 0 @ Enable cp6 access
- .endm
-
- /*
- * Note: a 1-cycle window exists where iintvec will return the value
- * of iintbase, so we explicitly check for "bad zeros"
- */
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- mrc p6, 0, \irqnr, c3, c2, 0 @ Read IINTVEC
- cmp \irqnr, #0
- mrceq p6, 0, \irqnr, c3, c2, 0 @ Re-read on potentially bad zero
- adds \irqstat, \irqnr, #1 @ Check for 0xffffffff
- movne \irqnr, \irqnr, lsr #2 @ Convert to irqnr
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- mrc p15, 0, \tmp1, c15, c1, 0
- ands \tmp2, \tmp1, #(1 << 6)
- bicne \tmp1, \tmp1, #(1 << 6)
- mcrne p15, 0, \tmp1, c15, c1, 0 @ Disable cp6 access
- .endm
diff --git a/arch/arm/mach-iop13xx/include/mach/hardware.h b/arch/arm/mach-iop13xx/include/mach/hardware.h
deleted file mode 100644
index 8c943fa6bbd7..000000000000
--- a/arch/arm/mach-iop13xx/include/mach/hardware.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-#include <asm/types.h>
-
-#ifndef __ASSEMBLY__
-extern u16 iop13xx_dev_id(void);
-extern void iop13xx_set_atu_mmr_bases(void);
-#endif
-
-/*
- * Generic chipset bits
- *
- */
-#include "iop13xx.h"
-
-/*
- * Board specific bits
- */
-#include "iq81340.h"
-
-#endif /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-iop13xx/include/mach/iop13xx.h b/arch/arm/mach-iop13xx/include/mach/iop13xx.h
deleted file mode 100644
index 04bb6aca12c5..000000000000
--- a/arch/arm/mach-iop13xx/include/mach/iop13xx.h
+++ /dev/null
@@ -1,508 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _IOP13XX_HW_H_
-#define _IOP13XX_HW_H_
-
-#ifndef __ASSEMBLY__
-
-enum reboot_mode;
-
-/* The ATU offsets can change based on the strapping */
-extern u32 iop13xx_atux_pmmr_offset;
-extern u32 iop13xx_atue_pmmr_offset;
-void iop13xx_init_early(void);
-void iop13xx_init_irq(void);
-void iop13xx_map_io(void);
-void iop13xx_platform_init(void);
-void iop13xx_add_tpmi_devices(void);
-void iop13xx_init_irq(void);
-void iop13xx_restart(enum reboot_mode, const char *);
-
-/* CPUID CP6 R0 Page 0 */
-static inline int iop13xx_cpu_id(void)
-{
- int id;
- asm volatile("mrc p6, 0, %0, c0, c0, 0":"=r" (id));
- return id;
-}
-
-/* WDTCR CP6 R7 Page 9 */
-static inline u32 read_wdtcr(void)
-{
- u32 val;
- asm volatile("mrc p6, 0, %0, c7, c9, 0":"=r" (val));
- return val;
-}
-static inline void write_wdtcr(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c7, c9, 0"::"r" (val));
-}
-
-/* WDTSR CP6 R8 Page 9 */
-static inline u32 read_wdtsr(void)
-{
- u32 val;
- asm volatile("mrc p6, 0, %0, c8, c9, 0":"=r" (val));
- return val;
-}
-static inline void write_wdtsr(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c8, c9, 0"::"r" (val));
-}
-
-/* RCSR - Reset Cause Status Register */
-static inline u32 read_rcsr(void)
-{
- u32 val;
- asm volatile("mrc p6, 0, %0, c0, c1, 0":"=r" (val));
- return val;
-}
-
-extern unsigned long get_iop_tick_rate(void);
-#endif
-
-/*
- * IOP13XX I/O and Mem space regions for PCI autoconfiguration
- */
-#define IOP13XX_MAX_RAM_SIZE 0x80000000UL /* 2GB */
-#define IOP13XX_PCI_OFFSET IOP13XX_MAX_RAM_SIZE
-
-/* PCI MAP
- * bus range cpu phys cpu virt note
- * 0x0000.0000 + 2GB (n/a) (n/a) inbound, 1:1 mapping with Physical RAM
- * 0x8000.0000 + 928M 0x1.8000.0000 (ioremap) PCIX outbound memory window
- * 0x8000.0000 + 928M 0x2.8000.0000 (ioremap) PCIE outbound memory window
- *
- * IO MAP
- * 0x00000 + 64K 0x0.fffb.0000 0xfee0.0000 PCIX outbound i/o window
- * 0x10000 + 64K 0x0.fffd.0000 0xfee1.0000 PCIE outbound i/o window
- */
-#define IOP13XX_PCIX_LOWER_IO_PA 0xfffb0000UL
-#define IOP13XX_PCIX_LOWER_IO_BA 0x0UL /* OIOTVR */
-
-#define IOP13XX_PCIX_MEM_PHYS_OFFSET 0x100000000ULL
-#define IOP13XX_PCIX_MEM_WINDOW_SIZE 0x3a000000UL
-#define IOP13XX_PCIX_LOWER_MEM_BA (PHYS_OFFSET + IOP13XX_PCI_OFFSET)
-#define IOP13XX_PCIX_LOWER_MEM_PA (IOP13XX_PCIX_MEM_PHYS_OFFSET +\
- IOP13XX_PCIX_LOWER_MEM_BA)
-#define IOP13XX_PCIX_UPPER_MEM_PA (IOP13XX_PCIX_LOWER_MEM_PA +\
- IOP13XX_PCIX_MEM_WINDOW_SIZE - 1)
-#define IOP13XX_PCIX_UPPER_MEM_BA (IOP13XX_PCIX_LOWER_MEM_BA +\
- IOP13XX_PCIX_MEM_WINDOW_SIZE - 1)
-
-#define IOP13XX_PCIX_MEM_COOKIE 0x80000000UL
-#define IOP13XX_PCIX_LOWER_MEM_RA IOP13XX_PCIX_MEM_COOKIE
-#define IOP13XX_PCIX_UPPER_MEM_RA (IOP13XX_PCIX_LOWER_MEM_RA +\
- IOP13XX_PCIX_MEM_WINDOW_SIZE - 1)
-#define IOP13XX_PCIX_MEM_OFFSET (IOP13XX_PCIX_MEM_COOKIE -\
- IOP13XX_PCIX_LOWER_MEM_BA)
-
-/* PCI-E ranges */
-#define IOP13XX_PCIE_LOWER_IO_PA 0xfffd0000UL
-#define IOP13XX_PCIE_LOWER_IO_BA 0x10000UL /* OIOTVR */
-
-#define IOP13XX_PCIE_MEM_PHYS_OFFSET 0x200000000ULL
-#define IOP13XX_PCIE_MEM_WINDOW_SIZE 0x3a000000UL
-#define IOP13XX_PCIE_LOWER_MEM_BA (PHYS_OFFSET + IOP13XX_PCI_OFFSET)
-#define IOP13XX_PCIE_LOWER_MEM_PA (IOP13XX_PCIE_MEM_PHYS_OFFSET +\
- IOP13XX_PCIE_LOWER_MEM_BA)
-#define IOP13XX_PCIE_UPPER_MEM_PA (IOP13XX_PCIE_LOWER_MEM_PA +\
- IOP13XX_PCIE_MEM_WINDOW_SIZE - 1)
-#define IOP13XX_PCIE_UPPER_MEM_BA (IOP13XX_PCIE_LOWER_MEM_BA +\
- IOP13XX_PCIE_MEM_WINDOW_SIZE - 1)
-
-/* All 0xc000.0000 - 0xfdff.ffff addresses belong to PCIe */
-#define IOP13XX_PCIE_MEM_COOKIE 0xc0000000UL
-#define IOP13XX_PCIE_LOWER_MEM_RA IOP13XX_PCIE_MEM_COOKIE
-#define IOP13XX_PCIE_UPPER_MEM_RA (IOP13XX_PCIE_LOWER_MEM_RA +\
- IOP13XX_PCIE_MEM_WINDOW_SIZE - 1)
-#define IOP13XX_PCIE_MEM_OFFSET (IOP13XX_PCIE_MEM_COOKIE -\
- IOP13XX_PCIE_LOWER_MEM_BA)
-
-/* PBI Ranges */
-#define IOP13XX_PBI_LOWER_MEM_PA 0xf0000000UL
-#define IOP13XX_PBI_MEM_WINDOW_SIZE 0x04000000UL
-#define IOP13XX_PBI_MEM_COOKIE 0xfa000000UL
-#define IOP13XX_PBI_LOWER_MEM_RA IOP13XX_PBI_MEM_COOKIE
-#define IOP13XX_PBI_UPPER_MEM_RA (IOP13XX_PBI_LOWER_MEM_RA +\
- IOP13XX_PBI_MEM_WINDOW_SIZE - 1)
-
-/*
- * IOP13XX chipset registers
- */
-#define IOP13XX_PMMR_PHYS_MEM_BASE 0xffd80000UL /* PMMR phys. address */
-#define IOP13XX_PMMR_VIRT_MEM_BASE (void __iomem *)(0xfee80000UL) /* PMMR phys. address */
-#define IOP13XX_PMMR_MEM_WINDOW_SIZE 0x80000
-#define IOP13XX_PMMR_UPPER_MEM_VA (IOP13XX_PMMR_VIRT_MEM_BASE +\
- IOP13XX_PMMR_MEM_WINDOW_SIZE - 1)
-#define IOP13XX_PMMR_UPPER_MEM_PA (IOP13XX_PMMR_PHYS_MEM_BASE +\
- IOP13XX_PMMR_MEM_WINDOW_SIZE - 1)
-#define IOP13XX_PMMR_VIRT_TO_PHYS(addr) (((addr) - IOP13XX_PMMR_VIRT_MEM_BASE)\
- + IOP13XX_PMMR_PHYS_MEM_BASE)
-#define IOP13XX_PMMR_PHYS_TO_VIRT(addr) (((addr) - IOP13XX_PMMR_PHYS_MEM_BASE)\
- + IOP13XX_PMMR_VIRT_MEM_BASE)
-#define IOP13XX_REG_ADDR32(reg) (IOP13XX_PMMR_VIRT_MEM_BASE + (reg))
-#define IOP13XX_REG_ADDR16(reg) (IOP13XX_PMMR_VIRT_MEM_BASE + (reg))
-#define IOP13XX_REG_ADDR8(reg) (IOP13XX_PMMR_VIRT_MEM_BASE + (reg))
-#define IOP13XX_REG_ADDR32_PHYS(reg) (IOP13XX_PMMR_PHYS_MEM_BASE + (reg))
-#define IOP13XX_REG_ADDR16_PHYS(reg) (IOP13XX_PMMR_PHYS_MEM_BASE + (reg))
-#define IOP13XX_REG_ADDR8_PHYS(reg) (IOP13XX_PMMR_PHYS_MEM_BASE + (reg))
-#define IOP13XX_PMMR_SIZE 0x00080000
-
-/*=================== Defines for Platform Devices =====================*/
-#define IOP13XX_UART0_PHYS (IOP13XX_PMMR_PHYS_MEM_BASE + 0x00002300)
-#define IOP13XX_UART1_PHYS (IOP13XX_PMMR_PHYS_MEM_BASE + 0x00002340)
-#define IOP13XX_UART0_VIRT (IOP13XX_PMMR_VIRT_MEM_BASE + 0x00002300)
-#define IOP13XX_UART1_VIRT (IOP13XX_PMMR_VIRT_MEM_BASE + 0x00002340)
-
-#define IOP13XX_I2C0_PHYS (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002500)
-#define IOP13XX_I2C1_PHYS (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002520)
-#define IOP13XX_I2C2_PHYS (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002540)
-#define IOP13XX_I2C0_VIRT (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002500)
-#define IOP13XX_I2C1_VIRT (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002520)
-#define IOP13XX_I2C2_VIRT (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002540)
-
-/* ATU selection flags */
-/* IOP13XX_INIT_ATU_DEFAULT = Rely on CONFIG_IOP13XX_ATU* */
-#define IOP13XX_INIT_ATU_DEFAULT (0)
-#define IOP13XX_INIT_ATU_ATUX (1 << 0)
-#define IOP13XX_INIT_ATU_ATUE (1 << 1)
-#define IOP13XX_INIT_ATU_NONE (1 << 2)
-
-/* UART selection flags */
-/* IOP13XX_INIT_UART_DEFAULT = Rely on CONFIG_IOP13XX_UART* */
-#define IOP13XX_INIT_UART_DEFAULT (0)
-#define IOP13XX_INIT_UART_0 (1 << 0)
-#define IOP13XX_INIT_UART_1 (1 << 1)
-
-/* I2C selection flags */
-/* IOP13XX_INIT_I2C_DEFAULT = Rely on CONFIG_IOP13XX_I2C* */
-#define IOP13XX_INIT_I2C_DEFAULT (0)
-#define IOP13XX_INIT_I2C_0 (1 << 0)
-#define IOP13XX_INIT_I2C_1 (1 << 1)
-#define IOP13XX_INIT_I2C_2 (1 << 2)
-
-/* ADMA selection flags */
-/* INIT_ADMA_DEFAULT = Rely on CONFIG_IOP13XX_ADMA* */
-#define IOP13XX_INIT_ADMA_DEFAULT (0)
-#define IOP13XX_INIT_ADMA_0 (1 << 0)
-#define IOP13XX_INIT_ADMA_1 (1 << 1)
-#define IOP13XX_INIT_ADMA_2 (1 << 2)
-
-/* Platform devices */
-#define IQ81340_NUM_UART 2
-#define IQ81340_NUM_I2C 3
-#define IQ81340_NUM_PHYS_MAP_FLASH 1
-#define IQ81340_NUM_ADMA 3
-#define IQ81340_MAX_PLAT_DEVICES (IQ81340_NUM_UART + \
- IQ81340_NUM_I2C + \
- IQ81340_NUM_PHYS_MAP_FLASH + \
- IQ81340_NUM_ADMA)
-
-/*========================== PMMR offsets for key registers ============*/
-#define IOP13XX_ATU0_PMMR_OFFSET 0x00048000
-#define IOP13XX_ATU1_PMMR_OFFSET 0x0004c000
-#define IOP13XX_ATU2_PMMR_OFFSET 0x0004d000
-#define IOP13XX_ADMA0_PMMR_OFFSET 0x00000000
-#define IOP13XX_ADMA1_PMMR_OFFSET 0x00000200
-#define IOP13XX_ADMA2_PMMR_OFFSET 0x00000400
-#define IOP13XX_PBI_PMMR_OFFSET 0x00001580
-#define IOP13XX_MU_PMMR_OFFSET 0x00004000
-#define IOP13XX_ESSR0_PMMR_OFFSET 0x00002188
-#define IOP13XX_ESSR0 IOP13XX_REG_ADDR32(0x00002188)
-
-#define IOP13XX_ESSR0_IFACE_MASK 0x00004000 /* Interface PCI-X / PCI-E */
-#define IOP13XX_CONTROLLER_ONLY (1 << 14)
-#define IOP13XX_INTERFACE_SEL_PCIX (1 << 15)
-
-#define IOP13XX_PMON_PMMR_OFFSET 0x0001A000
-#define IOP13XX_PMON_BASE (IOP13XX_PMMR_VIRT_MEM_BASE +\
- IOP13XX_PMON_PMMR_OFFSET)
-#define IOP13XX_PMON_PHYSBASE (IOP13XX_PMMR_PHYS_MEM_BASE +\
- IOP13XX_PMON_PMMR_OFFSET)
-
-#define IOP13XX_PMON_CMD0 (IOP13XX_PMON_BASE + 0x0)
-#define IOP13XX_PMON_EVR0 (IOP13XX_PMON_BASE + 0x4)
-#define IOP13XX_PMON_STS0 (IOP13XX_PMON_BASE + 0x8)
-#define IOP13XX_PMON_DATA0 (IOP13XX_PMON_BASE + 0xC)
-
-#define IOP13XX_PMON_CMD3 (IOP13XX_PMON_BASE + 0x30)
-#define IOP13XX_PMON_EVR3 (IOP13XX_PMON_BASE + 0x34)
-#define IOP13XX_PMON_STS3 (IOP13XX_PMON_BASE + 0x38)
-#define IOP13XX_PMON_DATA3 (IOP13XX_PMON_BASE + 0x3C)
-
-#define IOP13XX_PMON_CMD7 (IOP13XX_PMON_BASE + 0x70)
-#define IOP13XX_PMON_EVR7 (IOP13XX_PMON_BASE + 0x74)
-#define IOP13XX_PMON_STS7 (IOP13XX_PMON_BASE + 0x78)
-#define IOP13XX_PMON_DATA7 (IOP13XX_PMON_BASE + 0x7C)
-
-#define IOP13XX_PMONEN (IOP13XX_PMMR_VIRT_MEM_BASE + 0x4E040)
-#define IOP13XX_PMONSTAT (IOP13XX_PMMR_VIRT_MEM_BASE + 0x4E044)
-
-/*================================ATU===================================*/
-#define IOP13XX_ATUX_OFFSET(ofs) IOP13XX_REG_ADDR32(\
- iop13xx_atux_pmmr_offset + (ofs))
-
-#define IOP13XX_ATUX_DID IOP13XX_REG_ADDR16(\
- iop13xx_atux_pmmr_offset + 0x2)
-
-#define IOP13XX_ATUX_ATUCMD IOP13XX_REG_ADDR16(\
- iop13xx_atux_pmmr_offset + 0x4)
-#define IOP13XX_ATUX_ATUSR IOP13XX_REG_ADDR16(\
- iop13xx_atux_pmmr_offset + 0x6)
-
-#define IOP13XX_ATUX_IABAR0 IOP13XX_ATUX_OFFSET(0x10)
-#define IOP13XX_ATUX_IAUBAR0 IOP13XX_ATUX_OFFSET(0x14)
-#define IOP13XX_ATUX_IABAR1 IOP13XX_ATUX_OFFSET(0x18)
-#define IOP13XX_ATUX_IAUBAR1 IOP13XX_ATUX_OFFSET(0x1c)
-#define IOP13XX_ATUX_IABAR2 IOP13XX_ATUX_OFFSET(0x20)
-#define IOP13XX_ATUX_IAUBAR2 IOP13XX_ATUX_OFFSET(0x24)
-#define IOP13XX_ATUX_IALR0 IOP13XX_ATUX_OFFSET(0x40)
-#define IOP13XX_ATUX_IATVR0 IOP13XX_ATUX_OFFSET(0x44)
-#define IOP13XX_ATUX_IAUTVR0 IOP13XX_ATUX_OFFSET(0x48)
-#define IOP13XX_ATUX_IALR1 IOP13XX_ATUX_OFFSET(0x4c)
-#define IOP13XX_ATUX_IATVR1 IOP13XX_ATUX_OFFSET(0x50)
-#define IOP13XX_ATUX_IAUTVR1 IOP13XX_ATUX_OFFSET(0x54)
-#define IOP13XX_ATUX_IALR2 IOP13XX_ATUX_OFFSET(0x58)
-#define IOP13XX_ATUX_IATVR2 IOP13XX_ATUX_OFFSET(0x5c)
-#define IOP13XX_ATUX_IAUTVR2 IOP13XX_ATUX_OFFSET(0x60)
-#define IOP13XX_ATUX_ATUCR IOP13XX_ATUX_OFFSET(0x70)
-#define IOP13XX_ATUX_PCSR IOP13XX_ATUX_OFFSET(0x74)
-#define IOP13XX_ATUX_ATUISR IOP13XX_ATUX_OFFSET(0x78)
-#define IOP13XX_ATUX_PCIXSR IOP13XX_ATUX_OFFSET(0xD4)
-#define IOP13XX_ATUX_IABAR3 IOP13XX_ATUX_OFFSET(0x200)
-#define IOP13XX_ATUX_IAUBAR3 IOP13XX_ATUX_OFFSET(0x204)
-#define IOP13XX_ATUX_IALR3 IOP13XX_ATUX_OFFSET(0x208)
-#define IOP13XX_ATUX_IATVR3 IOP13XX_ATUX_OFFSET(0x20c)
-#define IOP13XX_ATUX_IAUTVR3 IOP13XX_ATUX_OFFSET(0x210)
-
-#define IOP13XX_ATUX_OIOBAR IOP13XX_ATUX_OFFSET(0x300)
-#define IOP13XX_ATUX_OIOWTVR IOP13XX_ATUX_OFFSET(0x304)
-#define IOP13XX_ATUX_OUMBAR0 IOP13XX_ATUX_OFFSET(0x308)
-#define IOP13XX_ATUX_OUMWTVR0 IOP13XX_ATUX_OFFSET(0x30c)
-#define IOP13XX_ATUX_OUMBAR1 IOP13XX_ATUX_OFFSET(0x310)
-#define IOP13XX_ATUX_OUMWTVR1 IOP13XX_ATUX_OFFSET(0x314)
-#define IOP13XX_ATUX_OUMBAR2 IOP13XX_ATUX_OFFSET(0x318)
-#define IOP13XX_ATUX_OUMWTVR2 IOP13XX_ATUX_OFFSET(0x31c)
-#define IOP13XX_ATUX_OUMBAR3 IOP13XX_ATUX_OFFSET(0x320)
-#define IOP13XX_ATUX_OUMWTVR3 IOP13XX_ATUX_OFFSET(0x324)
-#define IOP13XX_ATUX_OUDMABAR IOP13XX_ATUX_OFFSET(0x328)
-#define IOP13XX_ATUX_OUMSIBAR IOP13XX_ATUX_OFFSET(0x32c)
-#define IOP13XX_ATUX_OCCAR IOP13XX_ATUX_OFFSET(0x330)
-#define IOP13XX_ATUX_OCCDR IOP13XX_ATUX_OFFSET(0x334)
-
-#define IOP13XX_ATUX_ATUCR_OUT_EN (1 << 1)
-#define IOP13XX_ATUX_PCSR_CENTRAL_RES (1 << 25)
-#define IOP13XX_ATUX_PCSR_P_RSTOUT (1 << 21)
-#define IOP13XX_ATUX_PCSR_OUT_Q_BUSY (1 << 15)
-#define IOP13XX_ATUX_PCSR_IN_Q_BUSY (1 << 14)
-#define IOP13XX_ATUX_PCSR_FREQ_OFFSET (16)
-
-#define IOP13XX_ATUX_STAT_PCI_IFACE_ERR (1 << 18)
-#define IOP13XX_ATUX_STAT_VPD_ADDR (1 << 17)
-#define IOP13XX_ATUX_STAT_INT_PAR_ERR (1 << 16)
-#define IOP13XX_ATUX_STAT_CFG_WRITE (1 << 15)
-#define IOP13XX_ATUX_STAT_ERR_COR (1 << 14)
-#define IOP13XX_ATUX_STAT_TX_SCEM (1 << 13)
-#define IOP13XX_ATUX_STAT_REC_SCEM (1 << 12)
-#define IOP13XX_ATUX_STAT_POWER_TRAN (1 << 11)
-#define IOP13XX_ATUX_STAT_TX_SERR (1 << 10)
-#define IOP13XX_ATUX_STAT_DET_PAR_ERR (1 << 9 )
-#define IOP13XX_ATUX_STAT_BIST (1 << 8 )
-#define IOP13XX_ATUX_STAT_INT_REC_MABORT (1 << 7 )
-#define IOP13XX_ATUX_STAT_REC_SERR (1 << 4 )
-#define IOP13XX_ATUX_STAT_EXT_REC_MABORT (1 << 3 )
-#define IOP13XX_ATUX_STAT_EXT_REC_TABORT (1 << 2 )
-#define IOP13XX_ATUX_STAT_EXT_SIG_TABORT (1 << 1 )
-#define IOP13XX_ATUX_STAT_MASTER_DATA_PAR (1 << 0 )
-
-#define IOP13XX_ATUX_PCIXSR_BUS_NUM (8)
-#define IOP13XX_ATUX_PCIXSR_DEV_NUM (3)
-#define IOP13XX_ATUX_PCIXSR_FUNC_NUM (0)
-
-#define IOP13XX_ATUX_IALR_DISABLE 0x00000001
-#define IOP13XX_ATUX_OUMBAR_ENABLE 0x80000000
-
-#define IOP13XX_ATUE_OFFSET(ofs) IOP13XX_REG_ADDR32(\
- iop13xx_atue_pmmr_offset + (ofs))
-
-#define IOP13XX_ATUE_DID IOP13XX_REG_ADDR16(\
- iop13xx_atue_pmmr_offset + 0x2)
-#define IOP13XX_ATUE_ATUCMD IOP13XX_REG_ADDR16(\
- iop13xx_atue_pmmr_offset + 0x4)
-#define IOP13XX_ATUE_ATUSR IOP13XX_REG_ADDR16(\
- iop13xx_atue_pmmr_offset + 0x6)
-
-#define IOP13XX_ATUE_IABAR0 IOP13XX_ATUE_OFFSET(0x10)
-#define IOP13XX_ATUE_IAUBAR0 IOP13XX_ATUE_OFFSET(0x14)
-#define IOP13XX_ATUE_IABAR1 IOP13XX_ATUE_OFFSET(0x18)
-#define IOP13XX_ATUE_IAUBAR1 IOP13XX_ATUE_OFFSET(0x1c)
-#define IOP13XX_ATUE_IABAR2 IOP13XX_ATUE_OFFSET(0x20)
-#define IOP13XX_ATUE_IAUBAR2 IOP13XX_ATUE_OFFSET(0x24)
-#define IOP13XX_ATUE_IALR0 IOP13XX_ATUE_OFFSET(0x40)
-#define IOP13XX_ATUE_IATVR0 IOP13XX_ATUE_OFFSET(0x44)
-#define IOP13XX_ATUE_IAUTVR0 IOP13XX_ATUE_OFFSET(0x48)
-#define IOP13XX_ATUE_IALR1 IOP13XX_ATUE_OFFSET(0x4c)
-#define IOP13XX_ATUE_IATVR1 IOP13XX_ATUE_OFFSET(0x50)
-#define IOP13XX_ATUE_IAUTVR1 IOP13XX_ATUE_OFFSET(0x54)
-#define IOP13XX_ATUE_IALR2 IOP13XX_ATUE_OFFSET(0x58)
-#define IOP13XX_ATUE_IATVR2 IOP13XX_ATUE_OFFSET(0x5c)
-#define IOP13XX_ATUE_IAUTVR2 IOP13XX_ATUE_OFFSET(0x60)
-#define IOP13XX_ATUE_PE_LSTS IOP13XX_REG_ADDR16(\
- iop13xx_atue_pmmr_offset + 0xe2)
-#define IOP13XX_ATUE_OIOWTVR IOP13XX_ATUE_OFFSET(0x304)
-#define IOP13XX_ATUE_OUMBAR0 IOP13XX_ATUE_OFFSET(0x308)
-#define IOP13XX_ATUE_OUMWTVR0 IOP13XX_ATUE_OFFSET(0x30c)
-#define IOP13XX_ATUE_OUMBAR1 IOP13XX_ATUE_OFFSET(0x310)
-#define IOP13XX_ATUE_OUMWTVR1 IOP13XX_ATUE_OFFSET(0x314)
-#define IOP13XX_ATUE_OUMBAR2 IOP13XX_ATUE_OFFSET(0x318)
-#define IOP13XX_ATUE_OUMWTVR2 IOP13XX_ATUE_OFFSET(0x31c)
-#define IOP13XX_ATUE_OUMBAR3 IOP13XX_ATUE_OFFSET(0x320)
-#define IOP13XX_ATUE_OUMWTVR3 IOP13XX_ATUE_OFFSET(0x324)
-
-#define IOP13XX_ATUE_ATUCR IOP13XX_ATUE_OFFSET(0x70)
-#define IOP13XX_ATUE_PCSR IOP13XX_ATUE_OFFSET(0x74)
-#define IOP13XX_ATUE_ATUISR IOP13XX_ATUE_OFFSET(0x78)
-#define IOP13XX_ATUE_OIOBAR IOP13XX_ATUE_OFFSET(0x300)
-#define IOP13XX_ATUE_OCCAR IOP13XX_ATUE_OFFSET(0x32c)
-#define IOP13XX_ATUE_OCCDR IOP13XX_ATUE_OFFSET(0x330)
-
-#define IOP13XX_ATUE_PIE_STS IOP13XX_ATUE_OFFSET(0x384)
-#define IOP13XX_ATUE_PIE_MSK IOP13XX_ATUE_OFFSET(0x388)
-
-#define IOP13XX_ATUE_ATUCR_IVM (1 << 6)
-#define IOP13XX_ATUE_ATUCR_OUT_EN (1 << 1)
-#define IOP13XX_ATUE_OCCAR_BUS_NUM (24)
-#define IOP13XX_ATUE_OCCAR_DEV_NUM (19)
-#define IOP13XX_ATUE_OCCAR_FUNC_NUM (16)
-#define IOP13XX_ATUE_OCCAR_EXT_REG (8)
-#define IOP13XX_ATUE_OCCAR_REG (2)
-
-#define IOP13XX_ATUE_PCSR_BUS_NUM (24)
-#define IOP13XX_ATUE_PCSR_DEV_NUM (19)
-#define IOP13XX_ATUE_PCSR_FUNC_NUM (16)
-#define IOP13XX_ATUE_PCSR_OUT_Q_BUSY (1 << 15)
-#define IOP13XX_ATUE_PCSR_IN_Q_BUSY (1 << 14)
-#define IOP13XX_ATUE_PCSR_END_POINT (1 << 13)
-#define IOP13XX_ATUE_PCSR_LLRB_BUSY (1 << 12)
-
-#define IOP13XX_ATUE_PCSR_BUS_NUM_MASK (0xff)
-#define IOP13XX_ATUE_PCSR_DEV_NUM_MASK (0x1f)
-#define IOP13XX_ATUE_PCSR_FUNC_NUM_MASK (0x7)
-
-#define IOP13XX_ATUE_PCSR_CORE_RESET (8)
-#define IOP13XX_ATUE_PCSR_FUNC_NUM (16)
-
-#define IOP13XX_ATUE_LSTS_TRAINING (1 << 11)
-#define IOP13XX_ATUE_STAT_SLOT_PWR_MSG (1 << 28)
-#define IOP13XX_ATUE_STAT_PME (1 << 27)
-#define IOP13XX_ATUE_STAT_HOT_PLUG_MSG (1 << 26)
-#define IOP13XX_ATUE_STAT_IVM (1 << 25)
-#define IOP13XX_ATUE_STAT_BIST (1 << 24)
-#define IOP13XX_ATUE_STAT_CFG_WRITE (1 << 18)
-#define IOP13XX_ATUE_STAT_VPD_ADDR (1 << 17)
-#define IOP13XX_ATUE_STAT_POWER_TRAN (1 << 16)
-#define IOP13XX_ATUE_STAT_HALT_ON_ERROR (1 << 13)
-#define IOP13XX_ATUE_STAT_ROOT_SYS_ERR (1 << 12)
-#define IOP13XX_ATUE_STAT_ROOT_ERR_MSG (1 << 11)
-#define IOP13XX_ATUE_STAT_PCI_IFACE_ERR (1 << 10)
-#define IOP13XX_ATUE_STAT_ERR_COR (1 << 9 )
-#define IOP13XX_ATUE_STAT_ERR_UNCOR (1 << 8 )
-#define IOP13XX_ATUE_STAT_CRS (1 << 7 )
-#define IOP13XX_ATUE_STAT_LNK_DWN (1 << 6 )
-#define IOP13XX_ATUE_STAT_INT_REC_MABORT (1 << 5 )
-#define IOP13XX_ATUE_STAT_DET_PAR_ERR (1 << 4 )
-#define IOP13XX_ATUE_STAT_EXT_REC_MABORT (1 << 3 )
-#define IOP13XX_ATUE_STAT_SIG_TABORT (1 << 2 )
-#define IOP13XX_ATUE_STAT_EXT_REC_TABORT (1 << 1 )
-#define IOP13XX_ATUE_STAT_MASTER_DATA_PAR (1 << 0 )
-
-#define IOP13XX_ATUE_ESTAT_REC_UNSUPPORTED_COMP_REQ (1 << 31)
-#define IOP13XX_ATUE_ESTAT_REC_COMPLETER_ABORT (1 << 30)
-#define IOP13XX_ATUE_ESTAT_TX_POISONED_TLP (1 << 29)
-#define IOP13XX_ATUE_ESTAT_TX_PAR_ERR (1 << 28)
-#define IOP13XX_ATUE_ESTAT_REC_UNSUPPORTED_REQ (1 << 20)
-#define IOP13XX_ATUE_ESTAT_REC_ECRC_ERR (1 << 19)
-#define IOP13XX_ATUE_ESTAT_REC_MALFORMED_TLP (1 << 18)
-#define IOP13XX_ATUE_ESTAT_TX_RECEIVER_OVERFLOW (1 << 17)
-#define IOP13XX_ATUE_ESTAT_REC_UNEXPECTED_COMP (1 << 16)
-#define IOP13XX_ATUE_ESTAT_INT_COMP_ABORT (1 << 15)
-#define IOP13XX_ATUE_ESTAT_COMP_TIMEOUT (1 << 14)
-#define IOP13XX_ATUE_ESTAT_FLOW_CONTROL_ERR (1 << 13)
-#define IOP13XX_ATUE_ESTAT_REC_POISONED_TLP (1 << 12)
-#define IOP13XX_ATUE_ESTAT_DATA_LNK_ERR (1 << 4 )
-#define IOP13XX_ATUE_ESTAT_TRAINING_ERR (1 << 0 )
-
-#define IOP13XX_ATUE_IALR_DISABLE (0x00000001)
-#define IOP13XX_ATUE_OUMBAR_ENABLE (0x80000000)
-#define IOP13XX_ATU_OUMBAR_FUNC_NUM (28)
-#define IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK (0x7)
-/*=======================================================================*/
-
-/*============================MESSAGING UNIT=============================*/
-#define IOP13XX_MU_OFFSET(ofs) IOP13XX_REG_ADDR32(IOP13XX_MU_PMMR_OFFSET +\
- (ofs))
-
-#define IOP13XX_MU_IMR0 IOP13XX_MU_OFFSET(0x10)
-#define IOP13XX_MU_IMR1 IOP13XX_MU_OFFSET(0x14)
-#define IOP13XX_MU_OMR0 IOP13XX_MU_OFFSET(0x18)
-#define IOP13XX_MU_OMR1 IOP13XX_MU_OFFSET(0x1C)
-#define IOP13XX_MU_IDR IOP13XX_MU_OFFSET(0x20)
-#define IOP13XX_MU_IISR IOP13XX_MU_OFFSET(0x24)
-#define IOP13XX_MU_IIMR IOP13XX_MU_OFFSET(0x28)
-#define IOP13XX_MU_ODR IOP13XX_MU_OFFSET(0x2C)
-#define IOP13XX_MU_OISR IOP13XX_MU_OFFSET(0x30)
-#define IOP13XX_MU_OIMR IOP13XX_MU_OFFSET(0x34)
-#define IOP13XX_MU_IRCSR IOP13XX_MU_OFFSET(0x38)
-#define IOP13XX_MU_ORCSR IOP13XX_MU_OFFSET(0x3C)
-#define IOP13XX_MU_MIMR IOP13XX_MU_OFFSET(0x48)
-#define IOP13XX_MU_MUCR IOP13XX_MU_OFFSET(0x50)
-#define IOP13XX_MU_QBAR IOP13XX_MU_OFFSET(0x54)
-#define IOP13XX_MU_MUBAR IOP13XX_MU_OFFSET(0x84)
-
-#define IOP13XX_MU_WINDOW_SIZE (8 * 1024)
-#define IOP13XX_MU_BASE_PHYS (0xff000000)
-#define IOP13XX_MU_BASE_PCI (0xff000000)
-#define IOP13XX_MU_MIMR_PCI (IOP13XX_MU_BASE_PCI + 0x48)
-#define IOP13XX_MU_MIMR_CORE_SELECT (15)
-/*=======================================================================*/
-
-/*==============================ADMA UNITS===============================*/
-#define IOP13XX_ADMA_PHYS_BASE(chan) IOP13XX_REG_ADDR32_PHYS((chan << 9))
-#define IOP13XX_ADMA_UPPER_PA(chan) (IOP13XX_ADMA_PHYS_BASE(chan) + 0xc0)
-
-/*==============================XSI BRIDGE===============================*/
-#define IOP13XX_XBG_BECSR IOP13XX_REG_ADDR32(0x178c)
-#define IOP13XX_XBG_BERAR IOP13XX_REG_ADDR32(0x1790)
-#define IOP13XX_XBG_BERUAR IOP13XX_REG_ADDR32(0x1794)
-#define is_atue_occdr_error(x) ((__raw_readl(IOP13XX_XBG_BERAR) == \
- IOP13XX_PMMR_VIRT_TO_PHYS(\
- IOP13XX_ATUE_OCCDR))\
- && (__raw_readl(IOP13XX_XBG_BECSR) & 1))
-#define is_atux_occdr_error(x) ((__raw_readl(IOP13XX_XBG_BERAR) == \
- IOP13XX_PMMR_VIRT_TO_PHYS(\
- IOP13XX_ATUX_OCCDR))\
- && (__raw_readl(IOP13XX_XBG_BECSR) & 1))
-/*=======================================================================*/
-
-#define IOP13XX_PBI_OFFSET(ofs) IOP13XX_REG_ADDR32(IOP13XX_PBI_PMMR_OFFSET +\
- (ofs))
-
-#define IOP13XX_PBI_CR IOP13XX_PBI_OFFSET(0x0)
-#define IOP13XX_PBI_SR IOP13XX_PBI_OFFSET(0x4)
-#define IOP13XX_PBI_BAR0 IOP13XX_PBI_OFFSET(0x8)
-#define IOP13XX_PBI_LR0 IOP13XX_PBI_OFFSET(0xc)
-#define IOP13XX_PBI_BAR1 IOP13XX_PBI_OFFSET(0x10)
-#define IOP13XX_PBI_LR1 IOP13XX_PBI_OFFSET(0x14)
-
-#define IOP13XX_PROCESSOR_FREQ IOP13XX_REG_ADDR32(0x2180)
-
-/* Watchdog timer definitions */
-#define IOP_WDTCR_EN_ARM 0x1e1e1e1e
-#define IOP_WDTCR_EN 0xe1e1e1e1
-#define IOP_WDTCR_DIS_ARM 0x1f1f1f1f
-#define IOP_WDTCR_DIS 0xf1f1f1f1
-#define IOP_RCSR_WDT (1 << 5) /* reset caused by watchdog timer */
-#define IOP13XX_WDTSR_WRITE_EN (1 << 31) /* used to speed up reset requests */
-#define IOP13XX_WDTCR_IB_RESET (1 << 0)
-
-#endif /* _IOP13XX_HW_H_ */
diff --git a/arch/arm/mach-iop13xx/include/mach/iq81340.h b/arch/arm/mach-iop13xx/include/mach/iq81340.h
deleted file mode 100644
index d7ad27a95558..000000000000
--- a/arch/arm/mach-iop13xx/include/mach/iq81340.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _IQ81340_H_
-#define _IQ81340_H_
-
-#define IQ81340_PCE_BAR0 IOP13XX_PBI_LOWER_MEM_RA
-#define IQ81340_PCE_BAR1 (IQ81340_PCE_BAR0 + 0x02000000)
-
-#define IQ81340_FLASHBASE IQ81340_PCE_BAR0 /* Flash */
-
-#define IQ81340_PCE_BAR1_OFFSET(a) (IQ81340_PCE_BAR1 + (a))
-
-#define IQ81340_PRD_CODE IQ81340_PCE_BAR1_OFFSET(0)
-#define IQ81340_BRD_STEP IQ81340_PCE_BAR1_OFFSET(0x10000)
-#define IQ81340_CPLD_REV IQ81340_PCE_BAR1_OFFSET(0x20000)
-#define IQ81340_LED IQ81340_PCE_BAR1_OFFSET(0x30000)
-#define IQ81340_LHEX IQ81340_PCE_BAR1_OFFSET(0x40000)
-#define IQ81340_RHEX IQ81340_PCE_BAR1_OFFSET(0x50000)
-#define IQ81340_BUZZER IQ81340_PCE_BAR1_OFFSET(0x60000)
-#define IQ81340_32K_NVRAM IQ81340_PCE_BAR1_OFFSET(0x70000)
-#define IQ81340_256K_NVRAM IQ81340_PCE_BAR1_OFFSET(0x80000)
-#define IQ81340_ROTARY_SW IQ81340_PCE_BAR1_OFFSET(0xd0000)
-#define IQ81340_BATT_STAT IQ81340_PCE_BAR1_OFFSET(0xf0000)
-#define IQ81340_CMP_FLSH IQ81340_PCE_BAR1_OFFSET(0x1000000) /* 16MB */
-
-#define PBI_CF_IDE_BASE (IQ81340_CMP_FLSH)
-#define PBI_CF_BAR_ADDR (IOP13XX_PBI_BAR1)
-
-
-#endif /* _IQ81340_H_ */
diff --git a/arch/arm/mach-iop13xx/include/mach/irqs.h b/arch/arm/mach-iop13xx/include/mach/irqs.h
deleted file mode 100644
index cd6b6375c050..000000000000
--- a/arch/arm/mach-iop13xx/include/mach/irqs.h
+++ /dev/null
@@ -1,195 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _IOP13XX_IRQS_H_
-#define _IOP13XX_IRQS_H_
-
-#ifndef __ASSEMBLER__
-#include <linux/types.h>
-
-/* INTPND0 CP6 R0 Page 3
- */
-static inline u32 read_intpnd_0(void)
-{
- u32 val;
- asm volatile("mrc p6, 0, %0, c0, c3, 0":"=r" (val));
- return val;
-}
-
-/* INTPND1 CP6 R1 Page 3
- */
-static inline u32 read_intpnd_1(void)
-{
- u32 val;
- asm volatile("mrc p6, 0, %0, c1, c3, 0":"=r" (val));
- return val;
-}
-
-/* INTPND2 CP6 R2 Page 3
- */
-static inline u32 read_intpnd_2(void)
-{
- u32 val;
- asm volatile("mrc p6, 0, %0, c2, c3, 0":"=r" (val));
- return val;
-}
-
-/* INTPND3 CP6 R3 Page 3
- */
-static inline u32 read_intpnd_3(void)
-{
- u32 val;
- asm volatile("mrc p6, 0, %0, c3, c3, 0":"=r" (val));
- return val;
-}
-#endif
-
-#define INTBASE 0
-#define INTSIZE_4 1
-
-/*
- * iop34x chipset interrupts
- */
-#define IOP13XX_IRQ(x) (IOP13XX_IRQ_OFS + (x))
-
-/*
- * On IRQ or FIQ register
- */
-#define IRQ_IOP13XX_ADMA0_EOT (0)
-#define IRQ_IOP13XX_ADMA0_EOC (1)
-#define IRQ_IOP13XX_ADMA1_EOT (2)
-#define IRQ_IOP13XX_ADMA1_EOC (3)
-#define IRQ_IOP13XX_ADMA2_EOT (4)
-#define IRQ_IOP13XX_ADMA2_EOC (5)
-#define IRQ_IOP134_WATCHDOG (6)
-#define IRQ_IOP13XX_RSVD_7 (7)
-#define IRQ_IOP13XX_TIMER0 (8)
-#define IRQ_IOP13XX_TIMER1 (9)
-#define IRQ_IOP13XX_I2C_0 (10)
-#define IRQ_IOP13XX_I2C_1 (11)
-#define IRQ_IOP13XX_MSG (12)
-#define IRQ_IOP13XX_MSGIBQ (13)
-#define IRQ_IOP13XX_ATU_IM (14)
-#define IRQ_IOP13XX_ATU_BIST (15)
-#define IRQ_IOP13XX_PPMU (16)
-#define IRQ_IOP13XX_COREPMU (17)
-#define IRQ_IOP13XX_CORECACHE (18)
-#define IRQ_IOP13XX_RSVD_19 (19)
-#define IRQ_IOP13XX_RSVD_20 (20)
-#define IRQ_IOP13XX_RSVD_21 (21)
-#define IRQ_IOP13XX_RSVD_22 (22)
-#define IRQ_IOP13XX_RSVD_23 (23)
-#define IRQ_IOP13XX_XINT0 (24)
-#define IRQ_IOP13XX_XINT1 (25)
-#define IRQ_IOP13XX_XINT2 (26)
-#define IRQ_IOP13XX_XINT3 (27)
-#define IRQ_IOP13XX_XINT4 (28)
-#define IRQ_IOP13XX_XINT5 (29)
-#define IRQ_IOP13XX_XINT6 (30)
-#define IRQ_IOP13XX_XINT7 (31)
- /* IINTSRC1 bit */
-#define IRQ_IOP13XX_XINT8 (32) /* 0 */
-#define IRQ_IOP13XX_XINT9 (33) /* 1 */
-#define IRQ_IOP13XX_XINT10 (34) /* 2 */
-#define IRQ_IOP13XX_XINT11 (35) /* 3 */
-#define IRQ_IOP13XX_XINT12 (36) /* 4 */
-#define IRQ_IOP13XX_XINT13 (37) /* 5 */
-#define IRQ_IOP13XX_XINT14 (38) /* 6 */
-#define IRQ_IOP13XX_XINT15 (39) /* 7 */
-#define IRQ_IOP13XX_RSVD_40 (40) /* 8 */
-#define IRQ_IOP13XX_RSVD_41 (41) /* 9 */
-#define IRQ_IOP13XX_RSVD_42 (42) /* 10 */
-#define IRQ_IOP13XX_RSVD_43 (43) /* 11 */
-#define IRQ_IOP13XX_RSVD_44 (44) /* 12 */
-#define IRQ_IOP13XX_RSVD_45 (45) /* 13 */
-#define IRQ_IOP13XX_RSVD_46 (46) /* 14 */
-#define IRQ_IOP13XX_RSVD_47 (47) /* 15 */
-#define IRQ_IOP13XX_RSVD_48 (48) /* 16 */
-#define IRQ_IOP13XX_RSVD_49 (49) /* 17 */
-#define IRQ_IOP13XX_RSVD_50 (50) /* 18 */
-#define IRQ_IOP13XX_UART0 (51) /* 19 */
-#define IRQ_IOP13XX_UART1 (52) /* 20 */
-#define IRQ_IOP13XX_PBIE (53) /* 21 */
-#define IRQ_IOP13XX_ATU_CRW (54) /* 22 */
-#define IRQ_IOP13XX_ATU_ERR (55) /* 23 */
-#define IRQ_IOP13XX_MCU_ERR (56) /* 24 */
-#define IRQ_IOP13XX_ADMA0_ERR (57) /* 25 */
-#define IRQ_IOP13XX_ADMA1_ERR (58) /* 26 */
-#define IRQ_IOP13XX_ADMA2_ERR (59) /* 27 */
-#define IRQ_IOP13XX_RSVD_60 (60) /* 28 */
-#define IRQ_IOP13XX_RSVD_61 (61) /* 29 */
-#define IRQ_IOP13XX_MSG_ERR (62) /* 30 */
-#define IRQ_IOP13XX_RSVD_63 (63) /* 31 */
- /* IINTSRC2 bit */
-#define IRQ_IOP13XX_INTERPROC (64) /* 0 */
-#define IRQ_IOP13XX_RSVD_65 (65) /* 1 */
-#define IRQ_IOP13XX_RSVD_66 (66) /* 2 */
-#define IRQ_IOP13XX_RSVD_67 (67) /* 3 */
-#define IRQ_IOP13XX_RSVD_68 (68) /* 4 */
-#define IRQ_IOP13XX_RSVD_69 (69) /* 5 */
-#define IRQ_IOP13XX_RSVD_70 (70) /* 6 */
-#define IRQ_IOP13XX_RSVD_71 (71) /* 7 */
-#define IRQ_IOP13XX_RSVD_72 (72) /* 8 */
-#define IRQ_IOP13XX_RSVD_73 (73) /* 9 */
-#define IRQ_IOP13XX_RSVD_74 (74) /* 10 */
-#define IRQ_IOP13XX_RSVD_75 (75) /* 11 */
-#define IRQ_IOP13XX_RSVD_76 (76) /* 12 */
-#define IRQ_IOP13XX_RSVD_77 (77) /* 13 */
-#define IRQ_IOP13XX_RSVD_78 (78) /* 14 */
-#define IRQ_IOP13XX_RSVD_79 (79) /* 15 */
-#define IRQ_IOP13XX_RSVD_80 (80) /* 16 */
-#define IRQ_IOP13XX_RSVD_81 (81) /* 17 */
-#define IRQ_IOP13XX_RSVD_82 (82) /* 18 */
-#define IRQ_IOP13XX_RSVD_83 (83) /* 19 */
-#define IRQ_IOP13XX_RSVD_84 (84) /* 20 */
-#define IRQ_IOP13XX_RSVD_85 (85) /* 21 */
-#define IRQ_IOP13XX_RSVD_86 (86) /* 22 */
-#define IRQ_IOP13XX_RSVD_87 (87) /* 23 */
-#define IRQ_IOP13XX_RSVD_88 (88) /* 24 */
-#define IRQ_IOP13XX_RSVD_89 (89) /* 25 */
-#define IRQ_IOP13XX_RSVD_90 (90) /* 26 */
-#define IRQ_IOP13XX_RSVD_91 (91) /* 27 */
-#define IRQ_IOP13XX_RSVD_92 (92) /* 28 */
-#define IRQ_IOP13XX_RSVD_93 (93) /* 29 */
-#define IRQ_IOP13XX_SIB_ERR (94) /* 30 */
-#define IRQ_IOP13XX_SRAM_ERR (95) /* 31 */
- /* IINTSRC3 bit */
-#define IRQ_IOP13XX_I2C_2 (96) /* 0 */
-#define IRQ_IOP13XX_ATUE_BIST (97) /* 1 */
-#define IRQ_IOP13XX_ATUE_CRW (98) /* 2 */
-#define IRQ_IOP13XX_ATUE_ERR (99) /* 3 */
-#define IRQ_IOP13XX_IMU (100) /* 4 */
-#define IRQ_IOP13XX_RSVD_101 (101) /* 5 */
-#define IRQ_IOP13XX_RSVD_102 (102) /* 6 */
-#define IRQ_IOP13XX_TPMI0_OUT (103) /* 7 */
-#define IRQ_IOP13XX_TPMI1_OUT (104) /* 8 */
-#define IRQ_IOP13XX_TPMI2_OUT (105) /* 9 */
-#define IRQ_IOP13XX_TPMI3_OUT (106) /* 10 */
-#define IRQ_IOP13XX_ATUE_IMA (107) /* 11 */
-#define IRQ_IOP13XX_ATUE_IMB (108) /* 12 */
-#define IRQ_IOP13XX_ATUE_IMC (109) /* 13 */
-#define IRQ_IOP13XX_ATUE_IMD (110) /* 14 */
-#define IRQ_IOP13XX_MU_MSI_TB (111) /* 15 */
-#define IRQ_IOP13XX_RSVD_112 (112) /* 16 */
-#define IRQ_IOP13XX_INBD_MSI (113) /* 17 */
-#define IRQ_IOP13XX_RSVD_114 (114) /* 18 */
-#define IRQ_IOP13XX_RSVD_115 (115) /* 19 */
-#define IRQ_IOP13XX_RSVD_116 (116) /* 20 */
-#define IRQ_IOP13XX_RSVD_117 (117) /* 21 */
-#define IRQ_IOP13XX_RSVD_118 (118) /* 22 */
-#define IRQ_IOP13XX_RSVD_119 (119) /* 23 */
-#define IRQ_IOP13XX_RSVD_120 (120) /* 24 */
-#define IRQ_IOP13XX_RSVD_121 (121) /* 25 */
-#define IRQ_IOP13XX_RSVD_122 (122) /* 26 */
-#define IRQ_IOP13XX_RSVD_123 (123) /* 27 */
-#define IRQ_IOP13XX_RSVD_124 (124) /* 28 */
-#define IRQ_IOP13XX_RSVD_125 (125) /* 29 */
-#define IRQ_IOP13XX_RSVD_126 (126) /* 30 */
-#define IRQ_IOP13XX_HPI (127) /* 31 */
-
-#ifdef CONFIG_PCI_MSI
-#define IRQ_IOP13XX_MSI_0 (IRQ_IOP13XX_HPI + 1)
-#define NR_IOP13XX_IRQS (IRQ_IOP13XX_MSI_0 + 128)
-#else
-#define NR_IOP13XX_IRQS (IRQ_IOP13XX_HPI + 1)
-#endif
-
-#endif /* _IOP13XX_IRQ_H_ */
diff --git a/arch/arm/mach-iop13xx/include/mach/time.h b/arch/arm/mach-iop13xx/include/mach/time.h
deleted file mode 100644
index 2c2d7532d5c3..000000000000
--- a/arch/arm/mach-iop13xx/include/mach/time.h
+++ /dev/null
@@ -1,127 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _IOP13XX_TIME_H_
-#define _IOP13XX_TIME_H_
-
-#include <mach/irqs.h>
-
-#define IRQ_IOP_TIMER0 IRQ_IOP13XX_TIMER0
-
-#define IOP_TMR_EN 0x02
-#define IOP_TMR_RELOAD 0x04
-#define IOP_TMR_PRIVILEGED 0x08
-#define IOP_TMR_RATIO_1_1 0x00
-
-#define IOP13XX_XSI_FREQ_RATIO_MASK (3 << 19)
-#define IOP13XX_XSI_FREQ_RATIO_2 (0 << 19)
-#define IOP13XX_XSI_FREQ_RATIO_3 (1 << 19)
-#define IOP13XX_XSI_FREQ_RATIO_4 (2 << 19)
-#define IOP13XX_CORE_FREQ_MASK (7 << 16)
-#define IOP13XX_CORE_FREQ_600 (0 << 16)
-#define IOP13XX_CORE_FREQ_667 (1 << 16)
-#define IOP13XX_CORE_FREQ_800 (2 << 16)
-#define IOP13XX_CORE_FREQ_933 (3 << 16)
-#define IOP13XX_CORE_FREQ_1000 (4 << 16)
-#define IOP13XX_CORE_FREQ_1200 (5 << 16)
-
-void iop_init_time(unsigned long tickrate);
-
-static inline unsigned long iop13xx_core_freq(void)
-{
- unsigned long freq = __raw_readl(IOP13XX_PROCESSOR_FREQ);
- freq &= IOP13XX_CORE_FREQ_MASK;
- switch (freq) {
- case IOP13XX_CORE_FREQ_600:
- return 600000000;
- case IOP13XX_CORE_FREQ_667:
- return 667000000;
- case IOP13XX_CORE_FREQ_800:
- return 800000000;
- case IOP13XX_CORE_FREQ_933:
- return 933000000;
- case IOP13XX_CORE_FREQ_1000:
- return 1000000000;
- case IOP13XX_CORE_FREQ_1200:
- return 1200000000;
- default:
- printk("%s: warning unknown frequency, defaulting to 800MHz\n",
- __func__);
- }
-
- return 800000000;
-}
-
-static inline unsigned long iop13xx_xsi_bus_ratio(void)
-{
- unsigned long ratio = __raw_readl(IOP13XX_PROCESSOR_FREQ);
- ratio &= IOP13XX_XSI_FREQ_RATIO_MASK;
- switch (ratio) {
- case IOP13XX_XSI_FREQ_RATIO_2:
- return 2;
- case IOP13XX_XSI_FREQ_RATIO_3:
- return 3;
- case IOP13XX_XSI_FREQ_RATIO_4:
- return 4;
- default:
- printk("%s: warning unknown ratio, defaulting to 2\n",
- __func__);
- }
-
- return 2;
-}
-
-static inline u32 read_tmr0(void)
-{
- u32 val;
- asm volatile("mrc p6, 0, %0, c0, c9, 0" : "=r" (val));
- return val;
-}
-
-static inline void write_tmr0(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c0, c9, 0" : : "r" (val));
-}
-
-static inline void write_tmr1(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c1, c9, 0" : : "r" (val));
-}
-
-static inline u32 read_tcr0(void)
-{
- u32 val;
- asm volatile("mrc p6, 0, %0, c2, c9, 0" : "=r" (val));
- return val;
-}
-
-static inline void write_tcr0(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c2, c9, 0" : : "r" (val));
-}
-
-static inline u32 read_tcr1(void)
-{
- u32 val;
- asm volatile("mrc p6, 0, %0, c3, c9, 0" : "=r" (val));
- return val;
-}
-
-static inline void write_tcr1(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c3, c9, 0" : : "r" (val));
-}
-
-static inline void write_trr0(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c4, c9, 0" : : "r" (val));
-}
-
-static inline void write_trr1(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c5, c9, 0" : : "r" (val));
-}
-
-static inline void write_tisr(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c6, c9, 0" : : "r" (val));
-}
-#endif
diff --git a/arch/arm/mach-iop13xx/include/mach/uncompress.h b/arch/arm/mach-iop13xx/include/mach/uncompress.h
deleted file mode 100644
index c62903041d11..000000000000
--- a/arch/arm/mach-iop13xx/include/mach/uncompress.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <asm/types.h>
-#include <linux/serial_reg.h>
-#include <mach/hardware.h>
-
-#define UART_BASE ((volatile u32 *)IOP13XX_UART1_PHYS)
-#define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE)
-
-static inline void putc(char c)
-{
- while ((UART_BASE[UART_LSR] & TX_DONE) != TX_DONE)
- barrier();
- UART_BASE[UART_TX] = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
diff --git a/arch/arm/mach-iop13xx/io.c b/arch/arm/mach-iop13xx/io.c
deleted file mode 100644
index 253d446b1f3f..000000000000
--- a/arch/arm/mach-iop13xx/io.c
+++ /dev/null
@@ -1,77 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * iop13xx custom ioremap implementation
- * Copyright (c) 2005-2006, Intel Corporation.
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-
-#include "pci.h"
-
-static void __iomem *__iop13xx_ioremap_caller(phys_addr_t cookie,
- size_t size, unsigned int mtype, void *caller)
-{
- void __iomem * retval;
-
- switch (cookie) {
- case IOP13XX_PCIX_LOWER_MEM_RA ... IOP13XX_PCIX_UPPER_MEM_RA:
- if (unlikely(!iop13xx_atux_mem_base))
- retval = NULL;
- else
- retval = (iop13xx_atux_mem_base +
- (cookie - IOP13XX_PCIX_LOWER_MEM_RA));
- break;
- case IOP13XX_PCIE_LOWER_MEM_RA ... IOP13XX_PCIE_UPPER_MEM_RA:
- if (unlikely(!iop13xx_atue_mem_base))
- retval = NULL;
- else
- retval = (iop13xx_atue_mem_base +
- (cookie - IOP13XX_PCIE_LOWER_MEM_RA));
- break;
- case IOP13XX_PBI_LOWER_MEM_RA ... IOP13XX_PBI_UPPER_MEM_RA:
- retval = __arm_ioremap_caller(IOP13XX_PBI_LOWER_MEM_PA +
- (cookie - IOP13XX_PBI_LOWER_MEM_RA),
- size, mtype, __builtin_return_address(0));
- break;
- case IOP13XX_PMMR_PHYS_MEM_BASE ... IOP13XX_PMMR_UPPER_MEM_PA:
- retval = IOP13XX_PMMR_PHYS_TO_VIRT(cookie);
- break;
- default:
- retval = __arm_ioremap_caller(cookie, size, mtype,
- caller);
- }
-
- return retval;
-}
-
-static void __iop13xx_iounmap(volatile void __iomem *addr)
-{
- if (iop13xx_atue_mem_base)
- if (addr >= (void __iomem *) iop13xx_atue_mem_base &&
- addr < (void __iomem *) (iop13xx_atue_mem_base +
- iop13xx_atue_mem_size))
- goto skip;
-
- if (iop13xx_atux_mem_base)
- if (addr >= (void __iomem *) iop13xx_atux_mem_base &&
- addr < (void __iomem *) (iop13xx_atux_mem_base +
- iop13xx_atux_mem_size))
- goto skip;
-
- switch ((u32) addr) {
- case (u32)IOP13XX_PMMR_VIRT_MEM_BASE ... (u32)IOP13XX_PMMR_UPPER_MEM_VA:
- goto skip;
- }
- __iounmap(addr);
-
-skip:
- return;
-}
-
-void __init iop13xx_init_early(void)
-{
- arch_ioremap_caller = __iop13xx_ioremap_caller;
- arch_iounmap = __iop13xx_iounmap;
-}
diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c
deleted file mode 100644
index b3ce5cb228cc..000000000000
--- a/arch/arm/mach-iop13xx/iq81340mc.c
+++ /dev/null
@@ -1,84 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * iq81340mc board support
- * Copyright (c) 2005-2006, Intel Corporation.
- */
-#include <linux/pci.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "pci.h"
-#include <asm/mach/time.h>
-#include <mach/time.h>
-
-extern int init_atu; /* Flag to select which ATU(s) to initialize / disable */
-
-static int __init
-iq81340mc_pcix_map_irq(const struct pci_dev *dev, u8 idsel, u8 pin)
-{
- switch (idsel) {
- case 1:
- switch (pin) {
- case 1: return ATUX_INTB;
- case 2: return ATUX_INTC;
- case 3: return ATUX_INTD;
- case 4: return ATUX_INTA;
- default: return -1;
- }
- case 2:
- switch (pin) {
- case 1: return ATUX_INTC;
- case 2: return ATUX_INTD;
- case 3: return ATUX_INTC;
- case 4: return ATUX_INTD;
- default: return -1;
- }
- default: return -1;
- }
-}
-
-static struct hw_pci iq81340mc_pci __initdata = {
- .nr_controllers = 0,
- .setup = iop13xx_pci_setup,
- .map_irq = iq81340mc_pcix_map_irq,
- .scan = iop13xx_scan_bus,
- .preinit = iop13xx_pci_init,
-};
-
-static int __init iq81340mc_pci_init(void)
-{
- iop13xx_atu_select(&iq81340mc_pci);
- pci_common_init(&iq81340mc_pci);
- iop13xx_map_pci_memory();
-
- return 0;
-}
-
-static void __init iq81340mc_init(void)
-{
- iop13xx_platform_init();
- iq81340mc_pci_init();
- iop13xx_add_tpmi_devices();
-}
-
-static void __init iq81340mc_timer_init(void)
-{
- unsigned long bus_freq = iop13xx_core_freq() / iop13xx_xsi_bus_ratio();
- printk(KERN_DEBUG "%s: bus frequency: %lu\n", __func__, bus_freq);
- iop_init_time(bus_freq);
-}
-
-MACHINE_START(IQ81340MC, "Intel IQ81340MC")
- /* Maintainer: Dan Williams <dan.j.williams@intel.com> */
- .atag_offset = 0x100,
- .init_early = iop13xx_init_early,
- .map_io = iop13xx_map_io,
- .init_irq = iop13xx_init_irq,
- .init_time = iq81340mc_timer_init,
- .init_machine = iq81340mc_init,
- .restart = iop13xx_restart,
- .nr_irqs = NR_IOP13XX_IRQS,
-MACHINE_END
diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c
deleted file mode 100644
index 123845dcf2d3..000000000000
--- a/arch/arm/mach-iop13xx/iq81340sc.c
+++ /dev/null
@@ -1,86 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * iq81340sc board support
- * Copyright (c) 2005-2006, Intel Corporation.
- */
-#include <linux/pci.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "pci.h"
-#include <asm/mach/time.h>
-#include <mach/time.h>
-
-extern int init_atu;
-
-static int __init
-iq81340sc_atux_map_irq(const struct pci_dev *dev, u8 idsel, u8 pin)
-{
- WARN_ON(idsel < 1 || idsel > 2);
-
- switch (idsel) {
- case 1:
- switch (pin) {
- case 1: return ATUX_INTB;
- case 2: return ATUX_INTC;
- case 3: return ATUX_INTD;
- case 4: return ATUX_INTA;
- default: return -1;
- }
- case 2:
- switch (pin) {
- case 1: return ATUX_INTC;
- case 2: return ATUX_INTC;
- case 3: return ATUX_INTC;
- case 4: return ATUX_INTC;
- default: return -1;
- }
- default: return -1;
- }
-}
-
-static struct hw_pci iq81340sc_pci __initdata = {
- .nr_controllers = 0,
- .setup = iop13xx_pci_setup,
- .scan = iop13xx_scan_bus,
- .map_irq = iq81340sc_atux_map_irq,
- .preinit = iop13xx_pci_init
-};
-
-static int __init iq81340sc_pci_init(void)
-{
- iop13xx_atu_select(&iq81340sc_pci);
- pci_common_init(&iq81340sc_pci);
- iop13xx_map_pci_memory();
-
- return 0;
-}
-
-static void __init iq81340sc_init(void)
-{
- iop13xx_platform_init();
- iq81340sc_pci_init();
- iop13xx_add_tpmi_devices();
-}
-
-static void __init iq81340sc_timer_init(void)
-{
- unsigned long bus_freq = iop13xx_core_freq() / iop13xx_xsi_bus_ratio();
- printk(KERN_DEBUG "%s: bus frequency: %lu\n", __func__, bus_freq);
- iop_init_time(bus_freq);
-}
-
-MACHINE_START(IQ81340SC, "Intel IQ81340SC")
- /* Maintainer: Dan Williams <dan.j.williams@intel.com> */
- .atag_offset = 0x100,
- .init_early = iop13xx_init_early,
- .map_io = iop13xx_map_io,
- .init_irq = iop13xx_init_irq,
- .init_time = iq81340sc_timer_init,
- .init_machine = iq81340sc_init,
- .restart = iop13xx_restart,
- .nr_irqs = NR_IOP13XX_IRQS,
-MACHINE_END
diff --git a/arch/arm/mach-iop13xx/irq.c b/arch/arm/mach-iop13xx/irq.c
deleted file mode 100644
index 0e24ba7a1309..000000000000
--- a/arch/arm/mach-iop13xx/irq.c
+++ /dev/null
@@ -1,227 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * iop13xx IRQ handling / support functions
- * Copyright (c) 2005-2006, Intel Corporation.
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/sysctl.h>
-#include <linux/uaccess.h>
-#include <asm/mach/irq.h>
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include "msi.h"
-
-/* INTCTL0 CP6 R0 Page 4
- */
-static u32 read_intctl_0(void)
-{
- u32 val;
- asm volatile("mrc p6, 0, %0, c0, c4, 0":"=r" (val));
- return val;
-}
-static void write_intctl_0(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c0, c4, 0"::"r" (val));
-}
-
-/* INTCTL1 CP6 R1 Page 4
- */
-static u32 read_intctl_1(void)
-{
- u32 val;
- asm volatile("mrc p6, 0, %0, c1, c4, 0":"=r" (val));
- return val;
-}
-static void write_intctl_1(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c1, c4, 0"::"r" (val));
-}
-
-/* INTCTL2 CP6 R2 Page 4
- */
-static u32 read_intctl_2(void)
-{
- u32 val;
- asm volatile("mrc p6, 0, %0, c2, c4, 0":"=r" (val));
- return val;
-}
-static void write_intctl_2(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c2, c4, 0"::"r" (val));
-}
-
-/* INTCTL3 CP6 R3 Page 4
- */
-static u32 read_intctl_3(void)
-{
- u32 val;
- asm volatile("mrc p6, 0, %0, c3, c4, 0":"=r" (val));
- return val;
-}
-static void write_intctl_3(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c3, c4, 0"::"r" (val));
-}
-
-/* INTSTR0 CP6 R0 Page 5
- */
-static void write_intstr_0(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c0, c5, 0"::"r" (val));
-}
-
-/* INTSTR1 CP6 R1 Page 5
- */
-static void write_intstr_1(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c1, c5, 0"::"r" (val));
-}
-
-/* INTSTR2 CP6 R2 Page 5
- */
-static void write_intstr_2(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c2, c5, 0"::"r" (val));
-}
-
-/* INTSTR3 CP6 R3 Page 5
- */
-static void write_intstr_3(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c3, c5, 0"::"r" (val));
-}
-
-/* INTBASE CP6 R0 Page 2
- */
-static void write_intbase(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c0, c2, 0"::"r" (val));
-}
-
-/* INTSIZE CP6 R2 Page 2
- */
-static void write_intsize(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c2, c2, 0"::"r" (val));
-}
-
-/* 0 = Interrupt Masked and 1 = Interrupt not masked */
-static void
-iop13xx_irq_mask0 (struct irq_data *d)
-{
- write_intctl_0(read_intctl_0() & ~(1 << (d->irq - 0)));
-}
-
-static void
-iop13xx_irq_mask1 (struct irq_data *d)
-{
- write_intctl_1(read_intctl_1() & ~(1 << (d->irq - 32)));
-}
-
-static void
-iop13xx_irq_mask2 (struct irq_data *d)
-{
- write_intctl_2(read_intctl_2() & ~(1 << (d->irq - 64)));
-}
-
-static void
-iop13xx_irq_mask3 (struct irq_data *d)
-{
- write_intctl_3(read_intctl_3() & ~(1 << (d->irq - 96)));
-}
-
-static void
-iop13xx_irq_unmask0(struct irq_data *d)
-{
- write_intctl_0(read_intctl_0() | (1 << (d->irq - 0)));
-}
-
-static void
-iop13xx_irq_unmask1(struct irq_data *d)
-{
- write_intctl_1(read_intctl_1() | (1 << (d->irq - 32)));
-}
-
-static void
-iop13xx_irq_unmask2(struct irq_data *d)
-{
- write_intctl_2(read_intctl_2() | (1 << (d->irq - 64)));
-}
-
-static void
-iop13xx_irq_unmask3(struct irq_data *d)
-{
- write_intctl_3(read_intctl_3() | (1 << (d->irq - 96)));
-}
-
-static struct irq_chip iop13xx_irqchip1 = {
- .name = "IOP13xx-1",
- .irq_ack = iop13xx_irq_mask0,
- .irq_mask = iop13xx_irq_mask0,
- .irq_unmask = iop13xx_irq_unmask0,
-};
-
-static struct irq_chip iop13xx_irqchip2 = {
- .name = "IOP13xx-2",
- .irq_ack = iop13xx_irq_mask1,
- .irq_mask = iop13xx_irq_mask1,
- .irq_unmask = iop13xx_irq_unmask1,
-};
-
-static struct irq_chip iop13xx_irqchip3 = {
- .name = "IOP13xx-3",
- .irq_ack = iop13xx_irq_mask2,
- .irq_mask = iop13xx_irq_mask2,
- .irq_unmask = iop13xx_irq_unmask2,
-};
-
-static struct irq_chip iop13xx_irqchip4 = {
- .name = "IOP13xx-4",
- .irq_ack = iop13xx_irq_mask3,
- .irq_mask = iop13xx_irq_mask3,
- .irq_unmask = iop13xx_irq_unmask3,
-};
-
-extern void iop_init_cp6_handler(void);
-
-void __init iop13xx_init_irq(void)
-{
- unsigned int i;
-
- iop_init_cp6_handler();
-
- /* disable all interrupts */
- write_intctl_0(0);
- write_intctl_1(0);
- write_intctl_2(0);
- write_intctl_3(0);
-
- /* treat all as IRQ */
- write_intstr_0(0);
- write_intstr_1(0);
- write_intstr_2(0);
- write_intstr_3(0);
-
- /* initialize the interrupt vector generator */
- write_intbase(INTBASE);
- write_intsize(INTSIZE_4);
-
- for(i = 0; i <= IRQ_IOP13XX_HPI; i++) {
- if (i < 32)
- irq_set_chip(i, &iop13xx_irqchip1);
- else if (i < 64)
- irq_set_chip(i, &iop13xx_irqchip2);
- else if (i < 96)
- irq_set_chip(i, &iop13xx_irqchip3);
- else
- irq_set_chip(i, &iop13xx_irqchip4);
-
- irq_set_handler(i, handle_level_irq);
- irq_clear_status_flags(i, IRQ_NOREQUEST | IRQ_NOPROBE);
- }
-
- iop13xx_msi_init();
-}
diff --git a/arch/arm/mach-iop13xx/msi.c b/arch/arm/mach-iop13xx/msi.c
deleted file mode 100644
index f4d70cba1dd1..000000000000
--- a/arch/arm/mach-iop13xx/msi.c
+++ /dev/null
@@ -1,152 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-iop13xx/msi.c
- *
- * PCI MSI support for the iop13xx processor
- *
- * Copyright (c) 2006, Intel Corporation.
- */
-#include <linux/pci.h>
-#include <linux/msi.h>
-#include <asm/mach/irq.h>
-#include <asm/irq.h>
-#include <mach/irqs.h>
-
-/* IMIPR0 CP6 R8 Page 1
- */
-static u32 read_imipr_0(void)
-{
- u32 val;
- asm volatile("mrc p6, 0, %0, c8, c1, 0":"=r" (val));
- return val;
-}
-static void write_imipr_0(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c8, c1, 0"::"r" (val));
-}
-
-/* IMIPR1 CP6 R9 Page 1
- */
-static u32 read_imipr_1(void)
-{
- u32 val;
- asm volatile("mrc p6, 0, %0, c9, c1, 0":"=r" (val));
- return val;
-}
-static void write_imipr_1(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c9, c1, 0"::"r" (val));
-}
-
-/* IMIPR2 CP6 R10 Page 1
- */
-static u32 read_imipr_2(void)
-{
- u32 val;
- asm volatile("mrc p6, 0, %0, c10, c1, 0":"=r" (val));
- return val;
-}
-static void write_imipr_2(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c10, c1, 0"::"r" (val));
-}
-
-/* IMIPR3 CP6 R11 Page 1
- */
-static u32 read_imipr_3(void)
-{
- u32 val;
- asm volatile("mrc p6, 0, %0, c11, c1, 0":"=r" (val));
- return val;
-}
-static void write_imipr_3(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c11, c1, 0"::"r" (val));
-}
-
-static u32 (*read_imipr[])(void) = {
- read_imipr_0,
- read_imipr_1,
- read_imipr_2,
- read_imipr_3,
-};
-
-static void (*write_imipr[])(u32) = {
- write_imipr_0,
- write_imipr_1,
- write_imipr_2,
- write_imipr_3,
-};
-
-static void iop13xx_msi_handler(struct irq_desc *desc)
-{
- int i, j;
- unsigned long status;
-
- /* read IMIPR registers and find any active interrupts,
- * then call ISR for each active interrupt
- */
- for (i = 0; i < ARRAY_SIZE(read_imipr); i++) {
- status = (read_imipr[i])();
- if (!status)
- continue;
-
- do {
- j = find_first_bit(&status, 32);
- (write_imipr[i])(1 << j); /* write back to clear bit */
- generic_handle_irq(IRQ_IOP13XX_MSI_0 + j + (32*i));
- status = (read_imipr[i])();
- } while (status);
- }
-}
-
-void __init iop13xx_msi_init(void)
-{
- irq_set_chained_handler(IRQ_IOP13XX_INBD_MSI, iop13xx_msi_handler);
-}
-
-static void iop13xx_msi_nop(struct irq_data *d)
-{
- return;
-}
-
-static struct irq_chip iop13xx_msi_chip = {
- .name = "PCI-MSI",
- .irq_ack = iop13xx_msi_nop,
- .irq_enable = pci_msi_unmask_irq,
- .irq_disable = pci_msi_mask_irq,
- .irq_mask = pci_msi_mask_irq,
- .irq_unmask = pci_msi_unmask_irq,
-};
-
-int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
-{
- int id, irq = irq_alloc_desc_from(IRQ_IOP13XX_MSI_0, -1);
- struct msi_msg msg;
-
- if (irq < 0)
- return irq;
-
- if (irq >= NR_IOP13XX_IRQS) {
- irq_free_desc(irq);
- return -ENOSPC;
- }
-
- irq_set_msi_desc(irq, desc);
-
- msg.address_hi = 0x0;
- msg.address_lo = IOP13XX_MU_MIMR_PCI;
-
- id = iop13xx_cpu_id();
- msg.data = (id << IOP13XX_MU_MIMR_CORE_SELECT) | (irq & 0x7f);
-
- pci_write_msi_msg(irq, &msg);
- irq_set_chip_and_handler(irq, &iop13xx_msi_chip, handle_simple_irq);
-
- return 0;
-}
-
-void arch_teardown_msi_irq(unsigned int irq)
-{
- irq_free_desc(irq);
-}
diff --git a/arch/arm/mach-iop13xx/msi.h b/arch/arm/mach-iop13xx/msi.h
deleted file mode 100644
index 766dcfaaa353..000000000000
--- a/arch/arm/mach-iop13xx/msi.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _IOP13XX_MSI_H_
-#define _IOP13XX_MSI_H_
-#ifdef CONFIG_PCI_MSI
-void iop13xx_msi_init(void);
-#else
-static inline void iop13xx_msi_init(void)
-{
- return;
-}
-#endif
-#endif
diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c
deleted file mode 100644
index 46ea06e906cc..000000000000
--- a/arch/arm/mach-iop13xx/pci.c
+++ /dev/null
@@ -1,1115 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * iop13xx PCI support
- * Copyright (c) 2005-2006, Intel Corporation.
- */
-
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/jiffies.h>
-#include <linux/export.h>
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <linux/sizes.h>
-#include <asm/signal.h>
-#include <asm/mach/pci.h>
-#include "pci.h"
-
-#define IOP13XX_PCI_DEBUG 0
-#define PRINTK(x...) ((void)(IOP13XX_PCI_DEBUG && printk(x)))
-
-u32 iop13xx_atux_pmmr_offset; /* This offset can change based on strapping */
-u32 iop13xx_atue_pmmr_offset; /* This offset can change based on strapping */
-static struct pci_bus *pci_bus_atux = 0;
-static struct pci_bus *pci_bus_atue = 0;
-void __iomem *iop13xx_atue_mem_base;
-void __iomem *iop13xx_atux_mem_base;
-size_t iop13xx_atue_mem_size;
-size_t iop13xx_atux_mem_size;
-
-EXPORT_SYMBOL(iop13xx_atue_mem_base);
-EXPORT_SYMBOL(iop13xx_atux_mem_base);
-EXPORT_SYMBOL(iop13xx_atue_mem_size);
-EXPORT_SYMBOL(iop13xx_atux_mem_size);
-
-int init_atu = 0; /* Flag to select which ATU(s) to initialize / disable */
-static unsigned long atux_trhfa_timeout = 0; /* Trhfa = RST# high to first
- access */
-
-/* Scan the initialized busses and ioremap the requested memory range
- */
-void iop13xx_map_pci_memory(void)
-{
- int atu;
- struct pci_bus *bus;
- struct pci_dev *dev;
- resource_size_t end = 0;
-
- for (atu = 0; atu < 2; atu++) {
- bus = atu ? pci_bus_atue : pci_bus_atux;
- if (bus) {
- list_for_each_entry(dev, &bus->devices, bus_list) {
- int i;
- int max = 7;
-
- if (dev->subordinate)
- max = DEVICE_COUNT_RESOURCE;
-
- for (i = 0; i < max; i++) {
- struct resource *res = &dev->resource[i];
- if (res->flags & IORESOURCE_MEM)
- end = max(res->end, end);
- }
- }
-
- switch(atu) {
- case 0:
- iop13xx_atux_mem_size =
- (end - IOP13XX_PCIX_LOWER_MEM_RA) + 1;
-
- /* 16MB align the request */
- if (iop13xx_atux_mem_size & (SZ_16M - 1)) {
- iop13xx_atux_mem_size &= ~(SZ_16M - 1);
- iop13xx_atux_mem_size += SZ_16M;
- }
-
- if (end) {
- iop13xx_atux_mem_base = __arm_ioremap_pfn(
- __phys_to_pfn(IOP13XX_PCIX_LOWER_MEM_PA)
- , 0, iop13xx_atux_mem_size, MT_DEVICE);
- if (!iop13xx_atux_mem_base) {
- printk("%s: atux allocation "
- "failed\n", __func__);
- BUG();
- }
- } else
- iop13xx_atux_mem_size = 0;
- PRINTK("%s: atu: %d bus_size: %d mem_base: %p\n",
- __func__, atu, iop13xx_atux_mem_size,
- iop13xx_atux_mem_base);
- break;
- case 1:
- iop13xx_atue_mem_size =
- (end - IOP13XX_PCIE_LOWER_MEM_RA) + 1;
-
- /* 16MB align the request */
- if (iop13xx_atue_mem_size & (SZ_16M - 1)) {
- iop13xx_atue_mem_size &= ~(SZ_16M - 1);
- iop13xx_atue_mem_size += SZ_16M;
- }
-
- if (end) {
- iop13xx_atue_mem_base = __arm_ioremap_pfn(
- __phys_to_pfn(IOP13XX_PCIE_LOWER_MEM_PA)
- , 0, iop13xx_atue_mem_size, MT_DEVICE);
- if (!iop13xx_atue_mem_base) {
- printk("%s: atue allocation "
- "failed\n", __func__);
- BUG();
- }
- } else
- iop13xx_atue_mem_size = 0;
- PRINTK("%s: atu: %d bus_size: %d mem_base: %p\n",
- __func__, atu, iop13xx_atue_mem_size,
- iop13xx_atue_mem_base);
- break;
- }
-
- printk("%s: Initialized (%uM @ resource/virtual: %08lx/%p)\n",
- atu ? "ATUE" : "ATUX",
- (atu ? iop13xx_atue_mem_size : iop13xx_atux_mem_size) /
- SZ_1M,
- atu ? IOP13XX_PCIE_LOWER_MEM_RA :
- IOP13XX_PCIX_LOWER_MEM_RA,
- atu ? iop13xx_atue_mem_base :
- iop13xx_atux_mem_base);
- end = 0;
- }
-
- }
-}
-
-static int iop13xx_atu_function(int atu)
-{
- int func = 0;
- /* the function number depends on the value of the
- * IOP13XX_INTERFACE_SEL_PCIX reset strap
- * see C-Spec section 3.17
- */
- switch(atu) {
- case IOP13XX_INIT_ATU_ATUX:
- if (__raw_readl(IOP13XX_ESSR0) & IOP13XX_INTERFACE_SEL_PCIX)
- func = 5;
- else
- func = 0;
- break;
- case IOP13XX_INIT_ATU_ATUE:
- if (__raw_readl(IOP13XX_ESSR0) & IOP13XX_INTERFACE_SEL_PCIX)
- func = 0;
- else
- func = 5;
- break;
- default:
- BUG();
- }
-
- return func;
-}
-
-/* iop13xx_atux_cfg_address - format a configuration address for atux
- * @bus: Target bus to access
- * @devfn: Combined device number and function number
- * @where: Desired register's address offset
- *
- * Convert the parameters to a configuration address formatted
- * according the PCI-X 2.0 specification
- */
-static u32 iop13xx_atux_cfg_address(struct pci_bus *bus, int devfn, int where)
-{
- struct pci_sys_data *sys = bus->sysdata;
- u32 addr;
-
- if (sys->busnr == bus->number)
- addr = 1 << (PCI_SLOT(devfn) + 16) | (PCI_SLOT(devfn) << 11);
- else
- addr = bus->number << 16 | PCI_SLOT(devfn) << 11 | 1;
-
- addr |= PCI_FUNC(devfn) << 8 | ((where & 0xff) & ~3);
- addr |= ((where & 0xf00) >> 8) << 24; /* upper register number */
-
- return addr;
-}
-
-/* iop13xx_atue_cfg_address - format a configuration address for atue
- * @bus: Target bus to access
- * @devfn: Combined device number and function number
- * @where: Desired register's address offset
- *
- * Convert the parameters to an address usable by the ATUE_OCCAR
- */
-static u32 iop13xx_atue_cfg_address(struct pci_bus *bus, int devfn, int where)
-{
- struct pci_sys_data *sys = bus->sysdata;
- u32 addr;
-
- PRINTK("iop13xx_atue_cfg_address: bus: %d dev: %d func: %d",
- bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
- addr = ((u32) bus->number) << IOP13XX_ATUE_OCCAR_BUS_NUM |
- ((u32) PCI_SLOT(devfn)) << IOP13XX_ATUE_OCCAR_DEV_NUM |
- ((u32) PCI_FUNC(devfn)) << IOP13XX_ATUE_OCCAR_FUNC_NUM |
- (where & ~0x3);
-
- if (sys->busnr != bus->number)
- addr |= 1; /* type 1 access */
-
- return addr;
-}
-
-/* This routine checks the status of the last configuration cycle. If an error
- * was detected it returns >0, else it returns a 0. The errors being checked
- * are parity, master abort, target abort (master and target). These types of
- * errors occur during a config cycle where there is no device, like during
- * the discovery stage.
- */
-static int iop13xx_atux_pci_status(int clear)
-{
- unsigned int status;
- int err = 0;
-
- /*
- * Check the status registers.
- */
- status = __raw_readw(IOP13XX_ATUX_ATUSR);
- if (status & IOP_PCI_STATUS_ERROR)
- {
- PRINTK("\t\t\tPCI error: ATUSR %#08x", status);
- if(clear)
- __raw_writew(status & IOP_PCI_STATUS_ERROR,
- IOP13XX_ATUX_ATUSR);
- err = 1;
- }
- status = __raw_readl(IOP13XX_ATUX_ATUISR);
- if (status & IOP13XX_ATUX_ATUISR_ERROR)
- {
- PRINTK("\t\t\tPCI error interrupt: ATUISR %#08x", status);
- if(clear)
- __raw_writel(status & IOP13XX_ATUX_ATUISR_ERROR,
- IOP13XX_ATUX_ATUISR);
- err = 1;
- }
- return err;
-}
-
-/* Simply write the address register and read the configuration
- * data. Note that the data dependency on %0 encourages an abort
- * to be detected before we return.
- */
-static u32 iop13xx_atux_read(unsigned long addr)
-{
- u32 val;
-
- __asm__ __volatile__(
- "str %1, [%2]\n\t"
- "ldr %0, [%3]\n\t"
- "mov %0, %0\n\t"
- : "=r" (val)
- : "r" (addr), "r" (IOP13XX_ATUX_OCCAR), "r" (IOP13XX_ATUX_OCCDR));
-
- return val;
-}
-
-/* The read routines must check the error status of the last configuration
- * cycle. If there was an error, the routine returns all hex f's.
- */
-static int
-iop13xx_atux_read_config(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 *value)
-{
- unsigned long addr = iop13xx_atux_cfg_address(bus, devfn, where);
- u32 val = iop13xx_atux_read(addr) >> ((where & 3) * 8);
-
- if (iop13xx_atux_pci_status(1) || is_atux_occdr_error()) {
- __raw_writel(__raw_readl(IOP13XX_XBG_BECSR) & 3,
- IOP13XX_XBG_BECSR);
- val = 0xffffffff;
- }
-
- *value = val;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-iop13xx_atux_write_config(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 value)
-{
- unsigned long addr = iop13xx_atux_cfg_address(bus, devfn, where);
- u32 val;
-
- if (size != 4) {
- val = iop13xx_atux_read(addr);
- if (!iop13xx_atux_pci_status(1) == 0)
- return PCIBIOS_SUCCESSFUL;
-
- where = (where & 3) * 8;
-
- if (size == 1)
- val &= ~(0xff << where);
- else
- val &= ~(0xffff << where);
-
- __raw_writel(val | value << where, IOP13XX_ATUX_OCCDR);
- } else {
- __raw_writel(addr, IOP13XX_ATUX_OCCAR);
- __raw_writel(value, IOP13XX_ATUX_OCCDR);
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops iop13xx_atux_ops = {
- .read = iop13xx_atux_read_config,
- .write = iop13xx_atux_write_config,
-};
-
-/* This routine checks the status of the last configuration cycle. If an error
- * was detected it returns >0, else it returns a 0. The errors being checked
- * are parity, master abort, target abort (master and target). These types of
- * errors occur during a config cycle where there is no device, like during
- * the discovery stage.
- */
-static int iop13xx_atue_pci_status(int clear)
-{
- unsigned int status;
- int err = 0;
-
- /*
- * Check the status registers.
- */
-
- /* standard pci status register */
- status = __raw_readw(IOP13XX_ATUE_ATUSR);
- if (status & IOP_PCI_STATUS_ERROR) {
- PRINTK("\t\t\tPCI error: ATUSR %#08x", status);
- if(clear)
- __raw_writew(status & IOP_PCI_STATUS_ERROR,
- IOP13XX_ATUE_ATUSR);
- err++;
- }
-
- /* check the normal status bits in the ATUISR */
- status = __raw_readl(IOP13XX_ATUE_ATUISR);
- if (status & IOP13XX_ATUE_ATUISR_ERROR) {
- PRINTK("\t\t\tPCI error: ATUISR %#08x", status);
- if (clear)
- __raw_writew(status & IOP13XX_ATUE_ATUISR_ERROR,
- IOP13XX_ATUE_ATUISR);
- err++;
-
- /* check the PCI-E status if the ATUISR reports an interface error */
- if (status & IOP13XX_ATUE_STAT_PCI_IFACE_ERR) {
- /* get the unmasked errors */
- status = __raw_readl(IOP13XX_ATUE_PIE_STS) &
- ~(__raw_readl(IOP13XX_ATUE_PIE_MSK));
-
- if (status) {
- PRINTK("\t\t\tPCI-E error: ATUE_PIE_STS %#08x",
- __raw_readl(IOP13XX_ATUE_PIE_STS));
- err++;
- } else {
- PRINTK("\t\t\tPCI-E error: ATUE_PIE_STS %#08x",
- __raw_readl(IOP13XX_ATUE_PIE_STS));
- PRINTK("\t\t\tPCI-E error: ATUE_PIE_MSK %#08x",
- __raw_readl(IOP13XX_ATUE_PIE_MSK));
- BUG();
- }
-
- if(clear)
- __raw_writel(status, IOP13XX_ATUE_PIE_STS);
- }
- }
-
- return err;
-}
-
-static int
-iop13xx_pcie_map_irq(const struct pci_dev *dev, u8 idsel, u8 pin)
-{
- WARN_ON(idsel != 0);
-
- switch (pin) {
- case 1: return ATUE_INTA;
- case 2: return ATUE_INTB;
- case 3: return ATUE_INTC;
- case 4: return ATUE_INTD;
- default: return -1;
- }
-}
-
-static u32 iop13xx_atue_read(unsigned long addr)
-{
- u32 val;
-
- __raw_writel(addr, IOP13XX_ATUE_OCCAR);
- val = __raw_readl(IOP13XX_ATUE_OCCDR);
-
- rmb();
-
- return val;
-}
-
-/* The read routines must check the error status of the last configuration
- * cycle. If there was an error, the routine returns all hex f's.
- */
-static int
-iop13xx_atue_read_config(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 *value)
-{
- u32 val;
- unsigned long addr = iop13xx_atue_cfg_address(bus, devfn, where);
-
- /* Hide device numbers > 0 on the local PCI-E bus (Type 0 access) */
- if (!PCI_SLOT(devfn) || (addr & 1)) {
- val = iop13xx_atue_read(addr) >> ((where & 3) * 8);
- if( iop13xx_atue_pci_status(1) || is_atue_occdr_error() ) {
- __raw_writel(__raw_readl(IOP13XX_XBG_BECSR) & 3,
- IOP13XX_XBG_BECSR);
- val = 0xffffffff;
- }
-
- PRINTK("addr=%#0lx, val=%#010x", addr, val);
- } else
- val = 0xffffffff;
-
- *value = val;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-iop13xx_atue_write_config(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 value)
-{
- unsigned long addr = iop13xx_atue_cfg_address(bus, devfn, where);
- u32 val;
-
- if (size != 4) {
- val = iop13xx_atue_read(addr);
- if (!iop13xx_atue_pci_status(1) == 0)
- return PCIBIOS_SUCCESSFUL;
-
- where = (where & 3) * 8;
-
- if (size == 1)
- val &= ~(0xff << where);
- else
- val &= ~(0xffff << where);
-
- __raw_writel(val | value << where, IOP13XX_ATUE_OCCDR);
- } else {
- __raw_writel(addr, IOP13XX_ATUE_OCCAR);
- __raw_writel(value, IOP13XX_ATUE_OCCDR);
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops iop13xx_atue_ops = {
- .read = iop13xx_atue_read_config,
- .write = iop13xx_atue_write_config,
-};
-
-/* When a PCI device does not exist during config cycles, the XScale gets a
- * bus error instead of returning 0xffffffff. We can't rely on the ATU status
- * bits to tell us that it was indeed a configuration cycle that caused this
- * error especially in the case when the ATUE link is down. Instead we rely
- * on data from the south XSI bridge to validate the abort
- */
-int
-iop13xx_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
- PRINTK("Data abort: address = 0x%08lx "
- "fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx",
- addr, fsr, regs->ARM_pc, regs->ARM_lr);
-
- PRINTK("IOP13XX_XBG_BECSR: %#10x", __raw_readl(IOP13XX_XBG_BECSR));
- PRINTK("IOP13XX_XBG_BERAR: %#10x", __raw_readl(IOP13XX_XBG_BERAR));
- PRINTK("IOP13XX_XBG_BERUAR: %#10x", __raw_readl(IOP13XX_XBG_BERUAR));
-
- /* If it was an imprecise abort, then we need to correct the
- * return address to be _after_ the instruction.
- */
- if (fsr & (1 << 10))
- regs->ARM_pc += 4;
-
- if (is_atue_occdr_error() || is_atux_occdr_error())
- return 0;
- else
- return 1;
-}
-
-/* Scan an IOP13XX PCI bus. nr selects which ATU we use.
- */
-int iop13xx_scan_bus(int nr, struct pci_host_bridge *bridge)
-{
- int which_atu, ret;
- struct pci_sys_data *sys = pci_host_bridge_priv(bridge);
-
- switch (init_atu) {
- case IOP13XX_INIT_ATU_ATUX:
- which_atu = nr ? 0 : IOP13XX_INIT_ATU_ATUX;
- break;
- case IOP13XX_INIT_ATU_ATUE:
- which_atu = nr ? 0 : IOP13XX_INIT_ATU_ATUE;
- break;
- case (IOP13XX_INIT_ATU_ATUX | IOP13XX_INIT_ATU_ATUE):
- which_atu = nr ? IOP13XX_INIT_ATU_ATUE : IOP13XX_INIT_ATU_ATUX;
- break;
- default:
- which_atu = 0;
- }
-
- if (!which_atu) {
- BUG();
- return -ENODEV;
- }
-
- list_splice_init(&sys->resources, &bridge->windows);
- bridge->dev.parent = NULL;
- bridge->sysdata = sys;
- bridge->busnr = sys->busnr;
-
- switch (which_atu) {
- case IOP13XX_INIT_ATU_ATUX:
- if (time_after_eq(jiffies + msecs_to_jiffies(1000),
- atux_trhfa_timeout)) /* ensure not wrap */
- while(time_before(jiffies, atux_trhfa_timeout))
- udelay(100);
-
- bridge->ops = &iop13xx_atux_ops;
- ret = pci_scan_root_bus_bridge(bridge);
- if (!ret)
- pci_bus_atux = bridge->bus;
- break;
- case IOP13XX_INIT_ATU_ATUE:
- bridge->ops = &iop13xx_atue_ops;
- ret = pci_scan_root_bus_bridge(bridge);
- if (!ret)
- pci_bus_atue = bridge->bus;
- break;
- default:
- ret = -EINVAL;
- }
-
- return ret;
-}
-
-/* This function is called from iop13xx_pci_init() after assigning valid
- * values to iop13xx_atue_pmmr_offset. This is the location for common
- * setup of ATUE for all IOP13XX implementations.
- */
-void __init iop13xx_atue_setup(void)
-{
- int func = iop13xx_atu_function(IOP13XX_INIT_ATU_ATUE);
- u32 reg_val;
-
-#ifdef CONFIG_PCI_MSI
- /* BAR 0 (inbound msi window) */
- __raw_writel(IOP13XX_MU_BASE_PHYS, IOP13XX_MU_MUBAR);
- __raw_writel(~(IOP13XX_MU_WINDOW_SIZE - 1), IOP13XX_ATUE_IALR0);
- __raw_writel(IOP13XX_MU_BASE_PHYS, IOP13XX_ATUE_IATVR0);
- __raw_writel(IOP13XX_MU_BASE_PCI, IOP13XX_ATUE_IABAR0);
-#endif
-
- /* BAR 1 (1:1 mapping with Physical RAM) */
- /* Set limit and enable */
- __raw_writel(~(IOP13XX_MAX_RAM_SIZE - PHYS_OFFSET - 1) & ~0x1,
- IOP13XX_ATUE_IALR1);
- __raw_writel(0x0, IOP13XX_ATUE_IAUBAR1);
-
- /* Set base at the top of the reserved address space */
- __raw_writel(PHYS_OFFSET | PCI_BASE_ADDRESS_MEM_TYPE_64 |
- PCI_BASE_ADDRESS_MEM_PREFETCH, IOP13XX_ATUE_IABAR1);
-
- /* 1:1 mapping with physical ram
- * (leave big endian byte swap disabled)
- */
- __raw_writel(0x0, IOP13XX_ATUE_IAUTVR1);
- __raw_writel(PHYS_OFFSET, IOP13XX_ATUE_IATVR1);
-
- /* Outbound window 1 (PCIX/PCIE memory window) */
- /* 32 bit Address Space */
- __raw_writel(0x0, IOP13XX_ATUE_OUMWTVR1);
- /* PA[35:32] */
- __raw_writel(IOP13XX_ATUE_OUMBAR_ENABLE |
- (IOP13XX_PCIE_MEM_PHYS_OFFSET >> 32),
- IOP13XX_ATUE_OUMBAR1);
-
- /* Setup the I/O Bar
- * A[35-16] in 31-12
- */
- __raw_writel(((IOP13XX_PCIE_LOWER_IO_PA >> 0x4) & 0xfffff000),
- IOP13XX_ATUE_OIOBAR);
- __raw_writel(IOP13XX_PCIE_LOWER_IO_BA, IOP13XX_ATUE_OIOWTVR);
-
- /* clear startup errors */
- iop13xx_atue_pci_status(1);
-
- /* OIOBAR function number
- */
- reg_val = __raw_readl(IOP13XX_ATUE_OIOBAR);
- reg_val &= ~0x7;
- reg_val |= func;
- __raw_writel(reg_val, IOP13XX_ATUE_OIOBAR);
-
- /* OUMBAR function numbers
- */
- reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR0);
- reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
- IOP13XX_ATU_OUMBAR_FUNC_NUM);
- reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
- __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR0);
-
- reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR1);
- reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
- IOP13XX_ATU_OUMBAR_FUNC_NUM);
- reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
- __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR1);
-
- reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR2);
- reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
- IOP13XX_ATU_OUMBAR_FUNC_NUM);
- reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
- __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR2);
-
- reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR3);
- reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
- IOP13XX_ATU_OUMBAR_FUNC_NUM);
- reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
- __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR3);
-
- /* Enable inbound and outbound cycles
- */
- reg_val = __raw_readw(IOP13XX_ATUE_ATUCMD);
- reg_val |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
- PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
- __raw_writew(reg_val, IOP13XX_ATUE_ATUCMD);
-
- reg_val = __raw_readl(IOP13XX_ATUE_ATUCR);
- reg_val |= IOP13XX_ATUE_ATUCR_OUT_EN |
- IOP13XX_ATUE_ATUCR_IVM;
- __raw_writel(reg_val, IOP13XX_ATUE_ATUCR);
-}
-
-void __init iop13xx_atue_disable(void)
-{
- u32 reg_val;
-
- __raw_writew(0x0, IOP13XX_ATUE_ATUCMD);
- __raw_writel(IOP13XX_ATUE_ATUCR_IVM, IOP13XX_ATUE_ATUCR);
-
- /* wait for cycles to quiesce */
- while (__raw_readl(IOP13XX_ATUE_PCSR) & (IOP13XX_ATUE_PCSR_OUT_Q_BUSY |
- IOP13XX_ATUE_PCSR_IN_Q_BUSY |
- IOP13XX_ATUE_PCSR_LLRB_BUSY))
- cpu_relax();
-
- /* BAR 0 ( Disabled ) */
- __raw_writel(0x0, IOP13XX_ATUE_IAUBAR0);
- __raw_writel(0x0, IOP13XX_ATUE_IABAR0);
- __raw_writel(0x0, IOP13XX_ATUE_IAUTVR0);
- __raw_writel(0x0, IOP13XX_ATUE_IATVR0);
- __raw_writel(0x0, IOP13XX_ATUE_IALR0);
- reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR0);
- reg_val &= ~IOP13XX_ATUE_OUMBAR_ENABLE;
- __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR0);
-
- /* BAR 1 ( Disabled ) */
- __raw_writel(0x0, IOP13XX_ATUE_IAUBAR1);
- __raw_writel(0x0, IOP13XX_ATUE_IABAR1);
- __raw_writel(0x0, IOP13XX_ATUE_IAUTVR1);
- __raw_writel(0x0, IOP13XX_ATUE_IATVR1);
- __raw_writel(0x0, IOP13XX_ATUE_IALR1);
- reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR1);
- reg_val &= ~IOP13XX_ATUE_OUMBAR_ENABLE;
- __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR1);
-
- /* BAR 2 ( Disabled ) */
- __raw_writel(0x0, IOP13XX_ATUE_IAUBAR2);
- __raw_writel(0x0, IOP13XX_ATUE_IABAR2);
- __raw_writel(0x0, IOP13XX_ATUE_IAUTVR2);
- __raw_writel(0x0, IOP13XX_ATUE_IATVR2);
- __raw_writel(0x0, IOP13XX_ATUE_IALR2);
- reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR2);
- reg_val &= ~IOP13XX_ATUE_OUMBAR_ENABLE;
- __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR2);
-
- /* BAR 3 ( Disabled ) */
- reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR3);
- reg_val &= ~IOP13XX_ATUE_OUMBAR_ENABLE;
- __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR3);
-
- /* Setup the I/O Bar
- * A[35-16] in 31-12
- */
- __raw_writel((IOP13XX_PCIE_LOWER_IO_PA >> 0x4) & 0xfffff000,
- IOP13XX_ATUE_OIOBAR);
- __raw_writel(IOP13XX_PCIE_LOWER_IO_BA, IOP13XX_ATUE_OIOWTVR);
-}
-
-/* This function is called from iop13xx_pci_init() after assigning valid
- * values to iop13xx_atux_pmmr_offset. This is the location for common
- * setup of ATUX for all IOP13XX implementations.
- */
-void __init iop13xx_atux_setup(void)
-{
- u32 reg_val;
- int func = iop13xx_atu_function(IOP13XX_INIT_ATU_ATUX);
-
- /* Take PCI-X bus out of reset if bootloader hasn't already.
- * According to spec, we should wait for 2^25 PCI clocks to meet
- * the PCI timing parameter Trhfa (RST# high to first access).
- * This is rarely necessary and often ignored.
- */
- reg_val = __raw_readl(IOP13XX_ATUX_PCSR);
- if (reg_val & IOP13XX_ATUX_PCSR_P_RSTOUT) {
- int msec = (reg_val >> IOP13XX_ATUX_PCSR_FREQ_OFFSET) & 0x7;
- msec = 1000 / (8-msec); /* bits 100=133MHz, 111=>33MHz */
- __raw_writel(reg_val & ~IOP13XX_ATUX_PCSR_P_RSTOUT,
- IOP13XX_ATUX_PCSR);
- atux_trhfa_timeout = jiffies + msecs_to_jiffies(msec);
- }
- else
- atux_trhfa_timeout = jiffies;
-
-#ifdef CONFIG_PCI_MSI
- /* BAR 0 (inbound msi window) */
- __raw_writel(IOP13XX_MU_BASE_PHYS, IOP13XX_MU_MUBAR);
- __raw_writel(~(IOP13XX_MU_WINDOW_SIZE - 1), IOP13XX_ATUX_IALR0);
- __raw_writel(IOP13XX_MU_BASE_PHYS, IOP13XX_ATUX_IATVR0);
- __raw_writel(IOP13XX_MU_BASE_PCI, IOP13XX_ATUX_IABAR0);
-#endif
-
- /* BAR 1 (1:1 mapping with Physical RAM) */
- /* Set limit and enable */
- __raw_writel(~(IOP13XX_MAX_RAM_SIZE - PHYS_OFFSET - 1) & ~0x1,
- IOP13XX_ATUX_IALR1);
- __raw_writel(0x0, IOP13XX_ATUX_IAUBAR1);
-
- /* Set base at the top of the reserved address space */
- __raw_writel(PHYS_OFFSET | PCI_BASE_ADDRESS_MEM_TYPE_64 |
- PCI_BASE_ADDRESS_MEM_PREFETCH, IOP13XX_ATUX_IABAR1);
-
- /* 1:1 mapping with physical ram
- * (leave big endian byte swap disabled)
- */
- __raw_writel(0x0, IOP13XX_ATUX_IAUTVR1);
- __raw_writel(PHYS_OFFSET, IOP13XX_ATUX_IATVR1);
-
- /* Outbound window 1 (PCIX/PCIE memory window) */
- /* 32 bit Address Space */
- __raw_writel(0x0, IOP13XX_ATUX_OUMWTVR1);
- /* PA[35:32] */
- __raw_writel(IOP13XX_ATUX_OUMBAR_ENABLE |
- IOP13XX_PCIX_MEM_PHYS_OFFSET >> 32,
- IOP13XX_ATUX_OUMBAR1);
-
- /* Setup the I/O Bar
- * A[35-16] in 31-12
- */
- __raw_writel((IOP13XX_PCIX_LOWER_IO_PA >> 0x4) & 0xfffff000,
- IOP13XX_ATUX_OIOBAR);
- __raw_writel(IOP13XX_PCIX_LOWER_IO_BA, IOP13XX_ATUX_OIOWTVR);
-
- /* clear startup errors */
- iop13xx_atux_pci_status(1);
-
- /* OIOBAR function number
- */
- reg_val = __raw_readl(IOP13XX_ATUX_OIOBAR);
- reg_val &= ~0x7;
- reg_val |= func;
- __raw_writel(reg_val, IOP13XX_ATUX_OIOBAR);
-
- /* OUMBAR function numbers
- */
- reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR0);
- reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
- IOP13XX_ATU_OUMBAR_FUNC_NUM);
- reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
- __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR0);
-
- reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR1);
- reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
- IOP13XX_ATU_OUMBAR_FUNC_NUM);
- reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
- __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR1);
-
- reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR2);
- reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
- IOP13XX_ATU_OUMBAR_FUNC_NUM);
- reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
- __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR2);
-
- reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR3);
- reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
- IOP13XX_ATU_OUMBAR_FUNC_NUM);
- reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
- __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR3);
-
- /* Enable inbound and outbound cycles
- */
- reg_val = __raw_readw(IOP13XX_ATUX_ATUCMD);
- reg_val |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
- PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
- __raw_writew(reg_val, IOP13XX_ATUX_ATUCMD);
-
- reg_val = __raw_readl(IOP13XX_ATUX_ATUCR);
- reg_val |= IOP13XX_ATUX_ATUCR_OUT_EN;
- __raw_writel(reg_val, IOP13XX_ATUX_ATUCR);
-}
-
-void __init iop13xx_atux_disable(void)
-{
- u32 reg_val;
-
- __raw_writew(0x0, IOP13XX_ATUX_ATUCMD);
- __raw_writel(0x0, IOP13XX_ATUX_ATUCR);
-
- /* wait for cycles to quiesce */
- while (__raw_readl(IOP13XX_ATUX_PCSR) & (IOP13XX_ATUX_PCSR_OUT_Q_BUSY |
- IOP13XX_ATUX_PCSR_IN_Q_BUSY))
- cpu_relax();
-
- /* BAR 0 ( Disabled ) */
- __raw_writel(0x0, IOP13XX_ATUX_IAUBAR0);
- __raw_writel(0x0, IOP13XX_ATUX_IABAR0);
- __raw_writel(0x0, IOP13XX_ATUX_IAUTVR0);
- __raw_writel(0x0, IOP13XX_ATUX_IATVR0);
- __raw_writel(0x0, IOP13XX_ATUX_IALR0);
- reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR0);
- reg_val &= ~IOP13XX_ATUX_OUMBAR_ENABLE;
- __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR0);
-
- /* BAR 1 ( Disabled ) */
- __raw_writel(0x0, IOP13XX_ATUX_IAUBAR1);
- __raw_writel(0x0, IOP13XX_ATUX_IABAR1);
- __raw_writel(0x0, IOP13XX_ATUX_IAUTVR1);
- __raw_writel(0x0, IOP13XX_ATUX_IATVR1);
- __raw_writel(0x0, IOP13XX_ATUX_IALR1);
- reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR1);
- reg_val &= ~IOP13XX_ATUX_OUMBAR_ENABLE;
- __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR1);
-
- /* BAR 2 ( Disabled ) */
- __raw_writel(0x0, IOP13XX_ATUX_IAUBAR2);
- __raw_writel(0x0, IOP13XX_ATUX_IABAR2);
- __raw_writel(0x0, IOP13XX_ATUX_IAUTVR2);
- __raw_writel(0x0, IOP13XX_ATUX_IATVR2);
- __raw_writel(0x0, IOP13XX_ATUX_IALR2);
- reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR2);
- reg_val &= ~IOP13XX_ATUX_OUMBAR_ENABLE;
- __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR2);
-
- /* BAR 3 ( Disabled ) */
- __raw_writel(0x0, IOP13XX_ATUX_IAUBAR3);
- __raw_writel(0x0, IOP13XX_ATUX_IABAR3);
- __raw_writel(0x0, IOP13XX_ATUX_IAUTVR3);
- __raw_writel(0x0, IOP13XX_ATUX_IATVR3);
- __raw_writel(0x0, IOP13XX_ATUX_IALR3);
- reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR3);
- reg_val &= ~IOP13XX_ATUX_OUMBAR_ENABLE;
- __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR3);
-
- /* Setup the I/O Bar
- * A[35-16] in 31-12
- */
- __raw_writel((IOP13XX_PCIX_LOWER_IO_PA >> 0x4) & 0xfffff000,
- IOP13XX_ATUX_OIOBAR);
- __raw_writel(IOP13XX_PCIX_LOWER_IO_BA, IOP13XX_ATUX_OIOWTVR);
-}
-
-void __init iop13xx_set_atu_mmr_bases(void)
-{
- /* Based on ESSR0, determine the ATU X/E offsets */
- switch(__raw_readl(IOP13XX_ESSR0) &
- (IOP13XX_CONTROLLER_ONLY | IOP13XX_INTERFACE_SEL_PCIX)) {
- /* both asserted */
- case 0:
- iop13xx_atux_pmmr_offset = IOP13XX_ATU1_PMMR_OFFSET;
- iop13xx_atue_pmmr_offset = IOP13XX_ATU2_PMMR_OFFSET;
- break;
- /* IOP13XX_CONTROLLER_ONLY = deasserted
- * IOP13XX_INTERFACE_SEL_PCIX = asserted
- */
- case IOP13XX_CONTROLLER_ONLY:
- iop13xx_atux_pmmr_offset = IOP13XX_ATU0_PMMR_OFFSET;
- iop13xx_atue_pmmr_offset = IOP13XX_ATU2_PMMR_OFFSET;
- break;
- /* IOP13XX_CONTROLLER_ONLY = asserted
- * IOP13XX_INTERFACE_SEL_PCIX = deasserted
- */
- case IOP13XX_INTERFACE_SEL_PCIX:
- iop13xx_atux_pmmr_offset = IOP13XX_ATU1_PMMR_OFFSET;
- iop13xx_atue_pmmr_offset = IOP13XX_ATU2_PMMR_OFFSET;
- break;
- /* both deasserted */
- case IOP13XX_CONTROLLER_ONLY | IOP13XX_INTERFACE_SEL_PCIX:
- iop13xx_atux_pmmr_offset = IOP13XX_ATU2_PMMR_OFFSET;
- iop13xx_atue_pmmr_offset = IOP13XX_ATU0_PMMR_OFFSET;
- break;
- default:
- BUG();
- }
-}
-
-void __init iop13xx_atu_select(struct hw_pci *plat_pci)
-{
- int i;
-
- /* set system defaults
- * note: if "iop13xx_init_atu=" is specified this autodetect
- * sequence will be bypassed
- */
- if (init_atu == IOP13XX_INIT_ATU_DEFAULT) {
- /* check for single/dual interface */
- if (__raw_readl(IOP13XX_ESSR0) & IOP13XX_INTERFACE_SEL_PCIX) {
- /* ATUE must be present check the device id
- * to see if ATUX is present.
- */
- init_atu |= IOP13XX_INIT_ATU_ATUE;
- switch (__raw_readw(IOP13XX_ATUE_DID) & 0xf0) {
- case 0x70:
- case 0x80:
- case 0xc0:
- init_atu |= IOP13XX_INIT_ATU_ATUX;
- break;
- }
- } else {
- /* ATUX must be present check the device id
- * to see if ATUE is present.
- */
- init_atu |= IOP13XX_INIT_ATU_ATUX;
- switch (__raw_readw(IOP13XX_ATUX_DID) & 0xf0) {
- case 0x70:
- case 0x80:
- case 0xc0:
- init_atu |= IOP13XX_INIT_ATU_ATUE;
- break;
- }
- }
-
- /* check central resource and root complex capability */
- if (init_atu & IOP13XX_INIT_ATU_ATUX)
- if (!(__raw_readl(IOP13XX_ATUX_PCSR) &
- IOP13XX_ATUX_PCSR_CENTRAL_RES))
- init_atu &= ~IOP13XX_INIT_ATU_ATUX;
-
- if (init_atu & IOP13XX_INIT_ATU_ATUE)
- if (__raw_readl(IOP13XX_ATUE_PCSR) &
- IOP13XX_ATUE_PCSR_END_POINT)
- init_atu &= ~IOP13XX_INIT_ATU_ATUE;
- }
-
- for (i = 0; i < 2; i++) {
- if((init_atu & (1 << i)) == (1 << i))
- plat_pci->nr_controllers++;
- }
-}
-
-void __init iop13xx_pci_init(void)
-{
- /* clear pre-existing south bridge errors */
- __raw_writel(__raw_readl(IOP13XX_XBG_BECSR) & 3, IOP13XX_XBG_BECSR);
-
- /* Setup the Min Address for PCI memory... */
- pcibios_min_mem = IOP13XX_PCIX_LOWER_MEM_BA;
-
- /* if Linux is given control of an ATU
- * clear out its prior configuration,
- * otherwise do not touch the registers
- */
- if (init_atu & IOP13XX_INIT_ATU_ATUE) {
- iop13xx_atue_disable();
- iop13xx_atue_setup();
- }
-
- if (init_atu & IOP13XX_INIT_ATU_ATUX) {
- iop13xx_atux_disable();
- iop13xx_atux_setup();
- }
-
- hook_fault_code(16+6, iop13xx_pci_abort, SIGBUS, 0,
- "imprecise external abort");
-}
-
-/* initialize the pci memory space. handle any combination of
- * atue and atux enabled/disabled
- */
-int iop13xx_pci_setup(int nr, struct pci_sys_data *sys)
-{
- struct resource *res;
- int which_atu;
- u32 pcixsr, pcsr;
-
- if (nr > 1)
- return 0;
-
- res = kzalloc(sizeof(struct resource), GFP_KERNEL);
- if (!res)
- panic("PCI: unable to alloc resources");
-
-
- /* 'nr' assumptions:
- * ATUX is always 0
- * ATUE is 1 when ATUX is also enabled
- * ATUE is 0 when ATUX is disabled
- */
- switch(init_atu) {
- case IOP13XX_INIT_ATU_ATUX:
- which_atu = nr ? 0 : IOP13XX_INIT_ATU_ATUX;
- break;
- case IOP13XX_INIT_ATU_ATUE:
- which_atu = nr ? 0 : IOP13XX_INIT_ATU_ATUE;
- break;
- case (IOP13XX_INIT_ATU_ATUX | IOP13XX_INIT_ATU_ATUE):
- which_atu = nr ? IOP13XX_INIT_ATU_ATUE : IOP13XX_INIT_ATU_ATUX;
- break;
- default:
- which_atu = 0;
- }
-
- if (!which_atu) {
- kfree(res);
- return 0;
- }
-
- switch(which_atu) {
- case IOP13XX_INIT_ATU_ATUX:
- pcixsr = __raw_readl(IOP13XX_ATUX_PCIXSR);
- pcixsr &= ~0xffff;
- pcixsr |= sys->busnr << IOP13XX_ATUX_PCIXSR_BUS_NUM |
- 0 << IOP13XX_ATUX_PCIXSR_DEV_NUM |
- iop13xx_atu_function(IOP13XX_INIT_ATU_ATUX)
- << IOP13XX_ATUX_PCIXSR_FUNC_NUM;
- __raw_writel(pcixsr, IOP13XX_ATUX_PCIXSR);
-
- pci_ioremap_io(0, IOP13XX_PCIX_LOWER_IO_PA);
-
- res->start = IOP13XX_PCIX_LOWER_MEM_RA;
- res->end = IOP13XX_PCIX_UPPER_MEM_RA;
- res->name = "IQ81340 ATUX PCI Memory Space";
- res->flags = IORESOURCE_MEM;
- sys->mem_offset = IOP13XX_PCIX_MEM_OFFSET;
- break;
- case IOP13XX_INIT_ATU_ATUE:
- /* Note: the function number field in the PCSR is ro */
- pcsr = __raw_readl(IOP13XX_ATUE_PCSR);
- pcsr &= ~(0xfff8 << 16);
- pcsr |= sys->busnr << IOP13XX_ATUE_PCSR_BUS_NUM |
- 0 << IOP13XX_ATUE_PCSR_DEV_NUM;
-
- __raw_writel(pcsr, IOP13XX_ATUE_PCSR);
-
- pci_ioremap_io(SZ_64K, IOP13XX_PCIE_LOWER_IO_PA);
-
- res->start = IOP13XX_PCIE_LOWER_MEM_RA;
- res->end = IOP13XX_PCIE_UPPER_MEM_RA;
- res->name = "IQ81340 ATUE PCI Memory Space";
- res->flags = IORESOURCE_MEM;
- sys->mem_offset = IOP13XX_PCIE_MEM_OFFSET;
- sys->map_irq = iop13xx_pcie_map_irq;
- break;
- default:
- kfree(res);
- return 0;
- }
-
- request_resource(&iomem_resource, res);
-
- pci_add_resource_offset(&sys->resources, res, sys->mem_offset);
-
- return 1;
-}
-
-u16 iop13xx_dev_id(void)
-{
- if (__raw_readl(IOP13XX_ESSR0) & IOP13XX_INTERFACE_SEL_PCIX)
- return __raw_readw(IOP13XX_ATUE_DID);
- else
- return __raw_readw(IOP13XX_ATUX_DID);
-}
-
-static int __init iop13xx_init_atu_setup(char *str)
-{
- init_atu = IOP13XX_INIT_ATU_NONE;
- if (str) {
- while (*str != '\0') {
- switch (*str) {
- case 'x':
- case 'X':
- init_atu |= IOP13XX_INIT_ATU_ATUX;
- init_atu &= ~IOP13XX_INIT_ATU_NONE;
- break;
- case 'e':
- case 'E':
- init_atu |= IOP13XX_INIT_ATU_ATUE;
- init_atu &= ~IOP13XX_INIT_ATU_NONE;
- break;
- case ',':
- case '=':
- break;
- default:
- PRINTK("\"iop13xx_init_atu\" malformed at "
- "character: \'%c\'", *str);
- *(str + 1) = '\0';
- init_atu = IOP13XX_INIT_ATU_DEFAULT;
- }
- str++;
- }
- }
- return 1;
-}
-
-__setup("iop13xx_init_atu", iop13xx_init_atu_setup);
diff --git a/arch/arm/mach-iop13xx/pci.h b/arch/arm/mach-iop13xx/pci.h
deleted file mode 100644
index 736168d8c7ac..000000000000
--- a/arch/arm/mach-iop13xx/pci.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _IOP13XX_PCI_H_
-#define _IOP13XX_PCI_H_
-#include <linux/io.h>
-#include <mach/irqs.h>
-
-#include <linux/types.h>
-
-extern void __iomem *iop13xx_atue_mem_base;
-extern void __iomem *iop13xx_atux_mem_base;
-extern size_t iop13xx_atue_mem_size;
-extern size_t iop13xx_atux_mem_size;
-
-struct pci_sys_data;
-struct pci_host_bridge;
-struct hw_pci;
-int iop13xx_pci_setup(int nr, struct pci_sys_data *sys);
-int iop13xx_scan_bus(int nr, struct pci_host_bridge *bridge);
-void iop13xx_atu_select(struct hw_pci *plat_pci);
-void iop13xx_pci_init(void);
-void iop13xx_map_pci_memory(void);
-
-#define IOP_PCI_STATUS_ERROR (PCI_STATUS_PARITY | \
- PCI_STATUS_SIG_TARGET_ABORT | \
- PCI_STATUS_REC_TARGET_ABORT | \
- PCI_STATUS_REC_TARGET_ABORT | \
- PCI_STATUS_REC_MASTER_ABORT | \
- PCI_STATUS_SIG_SYSTEM_ERROR | \
- PCI_STATUS_DETECTED_PARITY)
-
-#define IOP13XX_ATUE_ATUISR_ERROR (IOP13XX_ATUE_STAT_HALT_ON_ERROR | \
- IOP13XX_ATUE_STAT_ROOT_SYS_ERR | \
- IOP13XX_ATUE_STAT_PCI_IFACE_ERR | \
- IOP13XX_ATUE_STAT_ERR_COR | \
- IOP13XX_ATUE_STAT_ERR_UNCOR | \
- IOP13XX_ATUE_STAT_CRS | \
- IOP13XX_ATUE_STAT_DET_PAR_ERR | \
- IOP13XX_ATUE_STAT_EXT_REC_MABORT | \
- IOP13XX_ATUE_STAT_SIG_TABORT | \
- IOP13XX_ATUE_STAT_EXT_REC_TABORT | \
- IOP13XX_ATUE_STAT_MASTER_DATA_PAR)
-
-#define IOP13XX_ATUX_ATUISR_ERROR (IOP13XX_ATUX_STAT_TX_SCEM | \
- IOP13XX_ATUX_STAT_REC_SCEM | \
- IOP13XX_ATUX_STAT_TX_SERR | \
- IOP13XX_ATUX_STAT_DET_PAR_ERR | \
- IOP13XX_ATUX_STAT_INT_REC_MABORT | \
- IOP13XX_ATUX_STAT_REC_SERR | \
- IOP13XX_ATUX_STAT_EXT_REC_MABORT | \
- IOP13XX_ATUX_STAT_EXT_REC_TABORT | \
- IOP13XX_ATUX_STAT_EXT_SIG_TABORT | \
- IOP13XX_ATUX_STAT_MASTER_DATA_PAR)
-
-/* PCI interrupts
- */
-#define ATUX_INTA IRQ_IOP13XX_XINT0
-#define ATUX_INTB IRQ_IOP13XX_XINT1
-#define ATUX_INTC IRQ_IOP13XX_XINT2
-#define ATUX_INTD IRQ_IOP13XX_XINT3
-
-#define ATUE_INTA IRQ_IOP13XX_ATUE_IMA
-#define ATUE_INTB IRQ_IOP13XX_ATUE_IMB
-#define ATUE_INTC IRQ_IOP13XX_ATUE_IMC
-#define ATUE_INTD IRQ_IOP13XX_ATUE_IMD
-
-#endif /* _IOP13XX_PCI_H_ */
diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c
deleted file mode 100644
index c5c84c9ec9ee..000000000000
--- a/arch/arm/mach-iop13xx/setup.c
+++ /dev/null
@@ -1,595 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * iop13xx platform Initialization
- * Copyright (c) 2005-2006, Intel Corporation.
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/serial_8250.h>
-#include <linux/io.h>
-#include <linux/reboot.h>
-#ifdef CONFIG_MTD_PHYSMAP
-#include <linux/mtd/physmap.h>
-#endif
-#include <asm/mach/map.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/hardware/iop_adma.h>
-#include <mach/irqs.h>
-
-#define IOP13XX_UART_XTAL 33334000
-#define IOP13XX_SETUP_DEBUG 0
-#define PRINTK(x...) ((void)(IOP13XX_SETUP_DEBUG && printk(x)))
-
-/* Standard IO mapping for all IOP13XX based systems
- */
-static struct map_desc iop13xx_std_desc[] __initdata = {
- { /* mem mapped registers */
- .virtual = (unsigned long)IOP13XX_PMMR_VIRT_MEM_BASE,
- .pfn = __phys_to_pfn(IOP13XX_PMMR_PHYS_MEM_BASE),
- .length = IOP13XX_PMMR_SIZE,
- .type = MT_DEVICE,
- },
-};
-
-static struct resource iop13xx_uart0_resources[] = {
- [0] = {
- .start = IOP13XX_UART0_PHYS,
- .end = IOP13XX_UART0_PHYS + 0x3f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_IOP13XX_UART0,
- .end = IRQ_IOP13XX_UART0,
- .flags = IORESOURCE_IRQ
- }
-};
-
-static struct resource iop13xx_uart1_resources[] = {
- [0] = {
- .start = IOP13XX_UART1_PHYS,
- .end = IOP13XX_UART1_PHYS + 0x3f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_IOP13XX_UART1,
- .end = IRQ_IOP13XX_UART1,
- .flags = IORESOURCE_IRQ
- }
-};
-
-static struct plat_serial8250_port iop13xx_uart0_data[] = {
- {
- .membase = IOP13XX_UART0_VIRT,
- .mapbase = IOP13XX_UART0_PHYS,
- .irq = IRQ_IOP13XX_UART0,
- .uartclk = IOP13XX_UART_XTAL,
- .regshift = 2,
- .iotype = UPIO_MEM,
- .flags = UPF_SKIP_TEST,
- },
- { },
-};
-
-static struct plat_serial8250_port iop13xx_uart1_data[] = {
- {
- .membase = IOP13XX_UART1_VIRT,
- .mapbase = IOP13XX_UART1_PHYS,
- .irq = IRQ_IOP13XX_UART1,
- .uartclk = IOP13XX_UART_XTAL,
- .regshift = 2,
- .iotype = UPIO_MEM,
- .flags = UPF_SKIP_TEST,
- },
- { },
-};
-
-/* The ids are fixed up later in iop13xx_platform_init */
-static struct platform_device iop13xx_uart0 = {
- .name = "serial8250",
- .id = 0,
- .dev.platform_data = iop13xx_uart0_data,
- .num_resources = 2,
- .resource = iop13xx_uart0_resources,
-};
-
-static struct platform_device iop13xx_uart1 = {
- .name = "serial8250",
- .id = 0,
- .dev.platform_data = iop13xx_uart1_data,
- .num_resources = 2,
- .resource = iop13xx_uart1_resources
-};
-
-static struct resource iop13xx_i2c_0_resources[] = {
- [0] = {
- .start = IOP13XX_I2C0_PHYS,
- .end = IOP13XX_I2C0_PHYS + 0x18,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_IOP13XX_I2C_0,
- .end = IRQ_IOP13XX_I2C_0,
- .flags = IORESOURCE_IRQ
- }
-};
-
-static struct resource iop13xx_i2c_1_resources[] = {
- [0] = {
- .start = IOP13XX_I2C1_PHYS,
- .end = IOP13XX_I2C1_PHYS + 0x18,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_IOP13XX_I2C_1,
- .end = IRQ_IOP13XX_I2C_1,
- .flags = IORESOURCE_IRQ
- }
-};
-
-static struct resource iop13xx_i2c_2_resources[] = {
- [0] = {
- .start = IOP13XX_I2C2_PHYS,
- .end = IOP13XX_I2C2_PHYS + 0x18,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_IOP13XX_I2C_2,
- .end = IRQ_IOP13XX_I2C_2,
- .flags = IORESOURCE_IRQ
- }
-};
-
-/* I2C controllers. The IOP13XX uses the same block as the IOP3xx, so
- * we just use the same device name.
- */
-
-/* The ids are fixed up later in iop13xx_platform_init */
-static struct platform_device iop13xx_i2c_0_controller = {
- .name = "IOP3xx-I2C",
- .id = 0,
- .num_resources = 2,
- .resource = iop13xx_i2c_0_resources
-};
-
-static struct platform_device iop13xx_i2c_1_controller = {
- .name = "IOP3xx-I2C",
- .id = 0,
- .num_resources = 2,
- .resource = iop13xx_i2c_1_resources
-};
-
-static struct platform_device iop13xx_i2c_2_controller = {
- .name = "IOP3xx-I2C",
- .id = 0,
- .num_resources = 2,
- .resource = iop13xx_i2c_2_resources
-};
-
-#ifdef CONFIG_MTD_PHYSMAP
-/* PBI Flash Device
- */
-static struct physmap_flash_data iq8134x_flash_data = {
- .width = 2,
-};
-
-static struct resource iq8134x_flash_resource = {
- .start = IQ81340_FLASHBASE,
- .end = 0,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device iq8134x_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = { .platform_data = &iq8134x_flash_data, },
- .num_resources = 1,
- .resource = &iq8134x_flash_resource,
-};
-
-static unsigned long iq8134x_probe_flash_size(void)
-{
- uint8_t __iomem *flash_addr = ioremap(IQ81340_FLASHBASE, PAGE_SIZE);
- int i;
- char query[3];
- unsigned long size = 0;
- int width = iq8134x_flash_data.width;
-
- if (flash_addr) {
- /* send CFI 'query' command */
- writew(0x98, flash_addr);
-
- /* check for CFI compliance */
- for (i = 0; i < 3 * width; i += width)
- query[i / width] = readb(flash_addr + (0x10 * width) + i);
-
- /* read the size */
- if (memcmp(query, "QRY", 3) == 0)
- size = 1 << readb(flash_addr + (0x27 * width));
-
- /* send CFI 'read array' command */
- writew(0xff, flash_addr);
-
- iounmap(flash_addr);
- }
-
- return size;
-}
-#endif
-
-/* ADMA Channels */
-static struct resource iop13xx_adma_0_resources[] = {
- [0] = {
- .start = IOP13XX_ADMA_PHYS_BASE(0),
- .end = IOP13XX_ADMA_UPPER_PA(0),
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_IOP13XX_ADMA0_EOT,
- .end = IRQ_IOP13XX_ADMA0_EOT,
- .flags = IORESOURCE_IRQ
- },
- [2] = {
- .start = IRQ_IOP13XX_ADMA0_EOC,
- .end = IRQ_IOP13XX_ADMA0_EOC,
- .flags = IORESOURCE_IRQ
- },
- [3] = {
- .start = IRQ_IOP13XX_ADMA0_ERR,
- .end = IRQ_IOP13XX_ADMA0_ERR,
- .flags = IORESOURCE_IRQ
- }
-};
-
-static struct resource iop13xx_adma_1_resources[] = {
- [0] = {
- .start = IOP13XX_ADMA_PHYS_BASE(1),
- .end = IOP13XX_ADMA_UPPER_PA(1),
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_IOP13XX_ADMA1_EOT,
- .end = IRQ_IOP13XX_ADMA1_EOT,
- .flags = IORESOURCE_IRQ
- },
- [2] = {
- .start = IRQ_IOP13XX_ADMA1_EOC,
- .end = IRQ_IOP13XX_ADMA1_EOC,
- .flags = IORESOURCE_IRQ
- },
- [3] = {
- .start = IRQ_IOP13XX_ADMA1_ERR,
- .end = IRQ_IOP13XX_ADMA1_ERR,
- .flags = IORESOURCE_IRQ
- }
-};
-
-static struct resource iop13xx_adma_2_resources[] = {
- [0] = {
- .start = IOP13XX_ADMA_PHYS_BASE(2),
- .end = IOP13XX_ADMA_UPPER_PA(2),
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_IOP13XX_ADMA2_EOT,
- .end = IRQ_IOP13XX_ADMA2_EOT,
- .flags = IORESOURCE_IRQ
- },
- [2] = {
- .start = IRQ_IOP13XX_ADMA2_EOC,
- .end = IRQ_IOP13XX_ADMA2_EOC,
- .flags = IORESOURCE_IRQ
- },
- [3] = {
- .start = IRQ_IOP13XX_ADMA2_ERR,
- .end = IRQ_IOP13XX_ADMA2_ERR,
- .flags = IORESOURCE_IRQ
- }
-};
-
-static u64 iop13xx_adma_dmamask = DMA_BIT_MASK(32);
-static struct iop_adma_platform_data iop13xx_adma_0_data = {
- .hw_id = 0,
- .pool_size = PAGE_SIZE,
-};
-
-static struct iop_adma_platform_data iop13xx_adma_1_data = {
- .hw_id = 1,
- .pool_size = PAGE_SIZE,
-};
-
-static struct iop_adma_platform_data iop13xx_adma_2_data = {
- .hw_id = 2,
- .pool_size = PAGE_SIZE,
-};
-
-/* The ids are fixed up later in iop13xx_platform_init */
-static struct platform_device iop13xx_adma_0_channel = {
- .name = "iop-adma",
- .id = 0,
- .num_resources = 4,
- .resource = iop13xx_adma_0_resources,
- .dev = {
- .dma_mask = &iop13xx_adma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = (void *) &iop13xx_adma_0_data,
- },
-};
-
-static struct platform_device iop13xx_adma_1_channel = {
- .name = "iop-adma",
- .id = 0,
- .num_resources = 4,
- .resource = iop13xx_adma_1_resources,
- .dev = {
- .dma_mask = &iop13xx_adma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = (void *) &iop13xx_adma_1_data,
- },
-};
-
-static struct platform_device iop13xx_adma_2_channel = {
- .name = "iop-adma",
- .id = 0,
- .num_resources = 4,
- .resource = iop13xx_adma_2_resources,
- .dev = {
- .dma_mask = &iop13xx_adma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = (void *) &iop13xx_adma_2_data,
- },
-};
-
-void __init iop13xx_map_io(void)
-{
- /* Initialize the Static Page Table maps */
- iotable_init(iop13xx_std_desc, ARRAY_SIZE(iop13xx_std_desc));
-}
-
-static int init_uart;
-static int init_i2c;
-static int init_adma;
-
-void __init iop13xx_platform_init(void)
-{
- int i;
- u32 uart_idx, i2c_idx, adma_idx, plat_idx;
- struct platform_device *iop13xx_devices[IQ81340_MAX_PLAT_DEVICES];
-
- /* set the bases so we can read the device id */
- iop13xx_set_atu_mmr_bases();
-
- memset(iop13xx_devices, 0, sizeof(iop13xx_devices));
-
- if (init_uart == IOP13XX_INIT_UART_DEFAULT) {
- switch (iop13xx_dev_id()) {
- /* enable both uarts on iop341 */
- case 0x3380:
- case 0x3384:
- case 0x3388:
- case 0x338c:
- init_uart |= IOP13XX_INIT_UART_0;
- init_uart |= IOP13XX_INIT_UART_1;
- break;
- /* only enable uart 1 */
- default:
- init_uart |= IOP13XX_INIT_UART_1;
- }
- }
-
- if (init_i2c == IOP13XX_INIT_I2C_DEFAULT) {
- switch (iop13xx_dev_id()) {
- /* enable all i2c units on iop341 and iop342 */
- case 0x3380:
- case 0x3384:
- case 0x3388:
- case 0x338c:
- case 0x3382:
- case 0x3386:
- case 0x338a:
- case 0x338e:
- init_i2c |= IOP13XX_INIT_I2C_0;
- init_i2c |= IOP13XX_INIT_I2C_1;
- init_i2c |= IOP13XX_INIT_I2C_2;
- break;
- /* only enable i2c 1 and 2 */
- default:
- init_i2c |= IOP13XX_INIT_I2C_1;
- init_i2c |= IOP13XX_INIT_I2C_2;
- }
- }
-
- if (init_adma == IOP13XX_INIT_ADMA_DEFAULT) {
- init_adma |= IOP13XX_INIT_ADMA_0;
- init_adma |= IOP13XX_INIT_ADMA_1;
- init_adma |= IOP13XX_INIT_ADMA_2;
- }
-
- plat_idx = 0;
- uart_idx = 0;
- i2c_idx = 0;
-
- /* uart 1 (if enabled) is ttyS0 */
- if (init_uart & IOP13XX_INIT_UART_1) {
- PRINTK("Adding uart1 to platform device list\n");
- iop13xx_uart1.id = uart_idx++;
- iop13xx_devices[plat_idx++] = &iop13xx_uart1;
- }
- if (init_uart & IOP13XX_INIT_UART_0) {
- PRINTK("Adding uart0 to platform device list\n");
- iop13xx_uart0.id = uart_idx++;
- iop13xx_devices[plat_idx++] = &iop13xx_uart0;
- }
-
- for(i = 0; i < IQ81340_NUM_I2C; i++) {
- if ((init_i2c & (1 << i)) && IOP13XX_SETUP_DEBUG)
- printk("Adding i2c%d to platform device list\n", i);
- switch(init_i2c & (1 << i)) {
- case IOP13XX_INIT_I2C_0:
- iop13xx_i2c_0_controller.id = i2c_idx++;
- iop13xx_devices[plat_idx++] =
- &iop13xx_i2c_0_controller;
- break;
- case IOP13XX_INIT_I2C_1:
- iop13xx_i2c_1_controller.id = i2c_idx++;
- iop13xx_devices[plat_idx++] =
- &iop13xx_i2c_1_controller;
- break;
- case IOP13XX_INIT_I2C_2:
- iop13xx_i2c_2_controller.id = i2c_idx++;
- iop13xx_devices[plat_idx++] =
- &iop13xx_i2c_2_controller;
- break;
- }
- }
-
- /* initialize adma channel ids and capabilities */
- adma_idx = 0;
- for (i = 0; i < IQ81340_NUM_ADMA; i++) {
- struct iop_adma_platform_data *plat_data;
- if ((init_adma & (1 << i)) && IOP13XX_SETUP_DEBUG)
- printk(KERN_INFO
- "Adding adma%d to platform device list\n", i);
- switch (init_adma & (1 << i)) {
- case IOP13XX_INIT_ADMA_0:
- iop13xx_adma_0_channel.id = adma_idx++;
- iop13xx_devices[plat_idx++] = &iop13xx_adma_0_channel;
- plat_data = &iop13xx_adma_0_data;
- dma_cap_set(DMA_MEMCPY, plat_data->cap_mask);
- dma_cap_set(DMA_XOR, plat_data->cap_mask);
- dma_cap_set(DMA_XOR_VAL, plat_data->cap_mask);
- dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask);
- break;
- case IOP13XX_INIT_ADMA_1:
- iop13xx_adma_1_channel.id = adma_idx++;
- iop13xx_devices[plat_idx++] = &iop13xx_adma_1_channel;
- plat_data = &iop13xx_adma_1_data;
- dma_cap_set(DMA_MEMCPY, plat_data->cap_mask);
- dma_cap_set(DMA_XOR, plat_data->cap_mask);
- dma_cap_set(DMA_XOR_VAL, plat_data->cap_mask);
- dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask);
- break;
- case IOP13XX_INIT_ADMA_2:
- iop13xx_adma_2_channel.id = adma_idx++;
- iop13xx_devices[plat_idx++] = &iop13xx_adma_2_channel;
- plat_data = &iop13xx_adma_2_data;
- dma_cap_set(DMA_MEMCPY, plat_data->cap_mask);
- dma_cap_set(DMA_XOR, plat_data->cap_mask);
- dma_cap_set(DMA_XOR_VAL, plat_data->cap_mask);
- dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask);
- dma_cap_set(DMA_PQ, plat_data->cap_mask);
- dma_cap_set(DMA_PQ_VAL, plat_data->cap_mask);
- break;
- }
- }
-
-#ifdef CONFIG_MTD_PHYSMAP
- iq8134x_flash_resource.end = iq8134x_flash_resource.start +
- iq8134x_probe_flash_size() - 1;
- if (iq8134x_flash_resource.end > iq8134x_flash_resource.start)
- iop13xx_devices[plat_idx++] = &iq8134x_flash;
- else
- printk(KERN_ERR "%s: Failed to probe flash size\n", __func__);
-#endif
-
- platform_add_devices(iop13xx_devices, plat_idx);
-}
-
-static int __init iop13xx_init_uart_setup(char *str)
-{
- if (str) {
- while (*str != '\0') {
- switch(*str) {
- case '0':
- init_uart |= IOP13XX_INIT_UART_0;
- break;
- case '1':
- init_uart |= IOP13XX_INIT_UART_1;
- break;
- case ',':
- case '=':
- break;
- default:
- PRINTK("\"iop13xx_init_uart\" malformed"
- " at character: \'%c\'", *str);
- *(str + 1) = '\0';
- init_uart = IOP13XX_INIT_UART_DEFAULT;
- }
- str++;
- }
- }
- return 1;
-}
-
-static int __init iop13xx_init_i2c_setup(char *str)
-{
- if (str) {
- while (*str != '\0') {
- switch(*str) {
- case '0':
- init_i2c |= IOP13XX_INIT_I2C_0;
- break;
- case '1':
- init_i2c |= IOP13XX_INIT_I2C_1;
- break;
- case '2':
- init_i2c |= IOP13XX_INIT_I2C_2;
- break;
- case ',':
- case '=':
- break;
- default:
- PRINTK("\"iop13xx_init_i2c\" malformed"
- " at character: \'%c\'", *str);
- *(str + 1) = '\0';
- init_i2c = IOP13XX_INIT_I2C_DEFAULT;
- }
- str++;
- }
- }
- return 1;
-}
-
-static int __init iop13xx_init_adma_setup(char *str)
-{
- if (str) {
- while (*str != '\0') {
- switch (*str) {
- case '0':
- init_adma |= IOP13XX_INIT_ADMA_0;
- break;
- case '1':
- init_adma |= IOP13XX_INIT_ADMA_1;
- break;
- case '2':
- init_adma |= IOP13XX_INIT_ADMA_2;
- break;
- case ',':
- case '=':
- break;
- default:
- PRINTK("\"iop13xx_init_adma\" malformed"
- " at character: \'%c\'", *str);
- *(str + 1) = '\0';
- init_adma = IOP13XX_INIT_ADMA_DEFAULT;
- }
- str++;
- }
- }
- return 1;
-}
-
-__setup("iop13xx_init_adma", iop13xx_init_adma_setup);
-__setup("iop13xx_init_uart", iop13xx_init_uart_setup);
-__setup("iop13xx_init_i2c", iop13xx_init_i2c_setup);
-
-void iop13xx_restart(enum reboot_mode mode, const char *cmd)
-{
- /*
- * Reset the internal bus (warning both cores are reset)
- */
- write_wdtcr(IOP_WDTCR_EN_ARM);
- write_wdtcr(IOP_WDTCR_EN);
- write_wdtsr(IOP13XX_WDTSR_WRITE_EN | IOP13XX_WDTCR_IB_RESET);
- write_wdtcr(0x1000);
-}
diff --git a/arch/arm/mach-iop13xx/tpmi.c b/arch/arm/mach-iop13xx/tpmi.c
deleted file mode 100644
index 4f916549e381..000000000000
--- a/arch/arm/mach-iop13xx/tpmi.c
+++ /dev/null
@@ -1,244 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * iop13xx tpmi device resources
- * Copyright (c) 2005-2006, Intel Corporation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/io.h>
-#include <asm/irq.h>
-#include <linux/sizes.h>
-#include <mach/irqs.h>
-
-/* assumes CONTROLLER_ONLY# is never asserted in the ESSR register */
-#define IOP13XX_TPMI_MMR(dev) IOP13XX_REG_ADDR32_PHYS(0x48000 + (dev << 12))
-#define IOP13XX_TPMI_MEM(dev) IOP13XX_REG_ADDR32_PHYS(0x60000 + (dev << 13))
-#define IOP13XX_TPMI_CTRL(dev) IOP13XX_REG_ADDR32_PHYS(0x50000 + (dev << 10))
-#define IOP13XX_TPMI_IOP_CTRL(dev) (IOP13XX_TPMI_CTRL(dev) + 0x2000)
-#define IOP13XX_TPMI_MMR_SIZE (SZ_4K - 1)
-#define IOP13XX_TPMI_MEM_SIZE (255)
-#define IOP13XX_TPMI_MEM_CTRL (SZ_1K - 1)
-#define IOP13XX_TPMI_RESOURCE_MMR 0
-#define IOP13XX_TPMI_RESOURCE_MEM 1
-#define IOP13XX_TPMI_RESOURCE_CTRL 2
-#define IOP13XX_TPMI_RESOURCE_IOP_CTRL 3
-#define IOP13XX_TPMI_RESOURCE_IRQ 4
-
-static struct resource iop13xx_tpmi_0_resources[] = {
- [IOP13XX_TPMI_RESOURCE_MMR] = {
- .start = IOP13XX_TPMI_MMR(4), /* tpmi0 starts at dev == 4 */
- .end = IOP13XX_TPMI_MMR(4) + IOP13XX_TPMI_MMR_SIZE,
- .flags = IORESOURCE_MEM,
- },
- [IOP13XX_TPMI_RESOURCE_MEM] = {
- .start = IOP13XX_TPMI_MEM(0),
- .end = IOP13XX_TPMI_MEM(0) + IOP13XX_TPMI_MEM_SIZE,
- .flags = IORESOURCE_MEM,
- },
- [IOP13XX_TPMI_RESOURCE_CTRL] = {
- .start = IOP13XX_TPMI_CTRL(0),
- .end = IOP13XX_TPMI_CTRL(0) + IOP13XX_TPMI_MEM_CTRL,
- .flags = IORESOURCE_MEM,
- },
- [IOP13XX_TPMI_RESOURCE_IOP_CTRL] = {
- .start = IOP13XX_TPMI_IOP_CTRL(0),
- .end = IOP13XX_TPMI_IOP_CTRL(0) + IOP13XX_TPMI_MEM_CTRL,
- .flags = IORESOURCE_MEM,
- },
- [IOP13XX_TPMI_RESOURCE_IRQ] = {
- .start = IRQ_IOP13XX_TPMI0_OUT,
- .end = IRQ_IOP13XX_TPMI0_OUT,
- .flags = IORESOURCE_IRQ
- }
-};
-
-static struct resource iop13xx_tpmi_1_resources[] = {
- [IOP13XX_TPMI_RESOURCE_MMR] = {
- .start = IOP13XX_TPMI_MMR(1),
- .end = IOP13XX_TPMI_MMR(1) + IOP13XX_TPMI_MMR_SIZE,
- .flags = IORESOURCE_MEM,
- },
- [IOP13XX_TPMI_RESOURCE_MEM] = {
- .start = IOP13XX_TPMI_MEM(1),
- .end = IOP13XX_TPMI_MEM(1) + IOP13XX_TPMI_MEM_SIZE,
- .flags = IORESOURCE_MEM,
- },
- [IOP13XX_TPMI_RESOURCE_CTRL] = {
- .start = IOP13XX_TPMI_CTRL(1),
- .end = IOP13XX_TPMI_CTRL(1) + IOP13XX_TPMI_MEM_CTRL,
- .flags = IORESOURCE_MEM,
- },
- [IOP13XX_TPMI_RESOURCE_IOP_CTRL] = {
- .start = IOP13XX_TPMI_IOP_CTRL(1),
- .end = IOP13XX_TPMI_IOP_CTRL(1) + IOP13XX_TPMI_MEM_CTRL,
- .flags = IORESOURCE_MEM,
- },
- [IOP13XX_TPMI_RESOURCE_IRQ] = {
- .start = IRQ_IOP13XX_TPMI1_OUT,
- .end = IRQ_IOP13XX_TPMI1_OUT,
- .flags = IORESOURCE_IRQ
- }
-};
-
-static struct resource iop13xx_tpmi_2_resources[] = {
- [IOP13XX_TPMI_RESOURCE_MMR] = {
- .start = IOP13XX_TPMI_MMR(2),
- .end = IOP13XX_TPMI_MMR(2) + IOP13XX_TPMI_MMR_SIZE,
- .flags = IORESOURCE_MEM,
- },
- [IOP13XX_TPMI_RESOURCE_MEM] = {
- .start = IOP13XX_TPMI_MEM(2),
- .end = IOP13XX_TPMI_MEM(2) + IOP13XX_TPMI_MEM_SIZE,
- .flags = IORESOURCE_MEM,
- },
- [IOP13XX_TPMI_RESOURCE_CTRL] = {
- .start = IOP13XX_TPMI_CTRL(2),
- .end = IOP13XX_TPMI_CTRL(2) + IOP13XX_TPMI_MEM_CTRL,
- .flags = IORESOURCE_MEM,
- },
- [IOP13XX_TPMI_RESOURCE_IOP_CTRL] = {
- .start = IOP13XX_TPMI_IOP_CTRL(2),
- .end = IOP13XX_TPMI_IOP_CTRL(2) + IOP13XX_TPMI_MEM_CTRL,
- .flags = IORESOURCE_MEM,
- },
- [IOP13XX_TPMI_RESOURCE_IRQ] = {
- .start = IRQ_IOP13XX_TPMI2_OUT,
- .end = IRQ_IOP13XX_TPMI2_OUT,
- .flags = IORESOURCE_IRQ
- }
-};
-
-static struct resource iop13xx_tpmi_3_resources[] = {
- [IOP13XX_TPMI_RESOURCE_MMR] = {
- .start = IOP13XX_TPMI_MMR(3),
- .end = IOP13XX_TPMI_MMR(3) + IOP13XX_TPMI_MMR_SIZE,
- .flags = IORESOURCE_MEM,
- },
- [IOP13XX_TPMI_RESOURCE_MEM] = {
- .start = IOP13XX_TPMI_MEM(3),
- .end = IOP13XX_TPMI_MEM(3) + IOP13XX_TPMI_MEM_SIZE,
- .flags = IORESOURCE_MEM,
- },
- [IOP13XX_TPMI_RESOURCE_CTRL] = {
- .start = IOP13XX_TPMI_CTRL(3),
- .end = IOP13XX_TPMI_CTRL(3) + IOP13XX_TPMI_MEM_CTRL,
- .flags = IORESOURCE_MEM,
- },
- [IOP13XX_TPMI_RESOURCE_IOP_CTRL] = {
- .start = IOP13XX_TPMI_IOP_CTRL(3),
- .end = IOP13XX_TPMI_IOP_CTRL(3) + IOP13XX_TPMI_MEM_CTRL,
- .flags = IORESOURCE_MEM,
- },
- [IOP13XX_TPMI_RESOURCE_IRQ] = {
- .start = IRQ_IOP13XX_TPMI3_OUT,
- .end = IRQ_IOP13XX_TPMI3_OUT,
- .flags = IORESOURCE_IRQ
- }
-};
-
-u64 iop13xx_tpmi_mask = DMA_BIT_MASK(32);
-static struct platform_device iop13xx_tpmi_0_device = {
- .name = "iop-tpmi",
- .id = 0,
- .num_resources = ARRAY_SIZE(iop13xx_tpmi_0_resources),
- .resource = iop13xx_tpmi_0_resources,
- .dev = {
- .dma_mask = &iop13xx_tpmi_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-static struct platform_device iop13xx_tpmi_1_device = {
- .name = "iop-tpmi",
- .id = 1,
- .num_resources = ARRAY_SIZE(iop13xx_tpmi_1_resources),
- .resource = iop13xx_tpmi_1_resources,
- .dev = {
- .dma_mask = &iop13xx_tpmi_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-static struct platform_device iop13xx_tpmi_2_device = {
- .name = "iop-tpmi",
- .id = 2,
- .num_resources = ARRAY_SIZE(iop13xx_tpmi_2_resources),
- .resource = iop13xx_tpmi_2_resources,
- .dev = {
- .dma_mask = &iop13xx_tpmi_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-static struct platform_device iop13xx_tpmi_3_device = {
- .name = "iop-tpmi",
- .id = 3,
- .num_resources = ARRAY_SIZE(iop13xx_tpmi_3_resources),
- .resource = iop13xx_tpmi_3_resources,
- .dev = {
- .dma_mask = &iop13xx_tpmi_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-__init void iop13xx_add_tpmi_devices(void)
-{
- unsigned short device_id;
-
- /* tpmi's not present on iop341 or iop342 */
- if (__raw_readl(IOP13XX_ESSR0) & IOP13XX_INTERFACE_SEL_PCIX)
- /* ATUE must be present */
- device_id = __raw_readw(IOP13XX_ATUE_DID);
- else
- /* ATUX must be present */
- device_id = __raw_readw(IOP13XX_ATUX_DID);
-
- switch (device_id) {
- /* iop34[1|2] 0-tpmi */
- case 0x3380:
- case 0x3384:
- case 0x3388:
- case 0x338c:
- case 0x3382:
- case 0x3386:
- case 0x338a:
- case 0x338e:
- return;
- /* iop348 1-tpmi */
- case 0x3310:
- case 0x3312:
- case 0x3314:
- case 0x3318:
- case 0x331a:
- case 0x331c:
- case 0x33c0:
- case 0x33c2:
- case 0x33c4:
- case 0x33c8:
- case 0x33ca:
- case 0x33cc:
- case 0x33b0:
- case 0x33b2:
- case 0x33b4:
- case 0x33b8:
- case 0x33ba:
- case 0x33bc:
- case 0x3320:
- case 0x3322:
- case 0x3324:
- case 0x3328:
- case 0x332a:
- case 0x332c:
- platform_device_register(&iop13xx_tpmi_0_device);
- return;
- default:
- platform_device_register(&iop13xx_tpmi_0_device);
- platform_device_register(&iop13xx_tpmi_1_device);
- platform_device_register(&iop13xx_tpmi_2_device);
- platform_device_register(&iop13xx_tpmi_3_device);
- return;
- }
-}
diff --git a/arch/arm/mach-iop33x/Kconfig b/arch/arm/mach-iop33x/Kconfig
deleted file mode 100644
index cd6069c7c568..000000000000
--- a/arch/arm/mach-iop33x/Kconfig
+++ /dev/null
@@ -1,22 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-if ARCH_IOP33X
-
-menu "IOP33x Implementation Options"
-
-comment "IOP33x Platform Types"
-
-config ARCH_IQ80331
- bool "Enable support for IQ80331"
- help
- Say Y here if you want to run your kernel on the Intel IQ80331
- evaluation kit for the IOP331 chipset.
-
-config MACH_IQ80332
- bool "Enable support for IQ80332"
- help
- Say Y here if you want to run your kernel on the Intel IQ80332
- evaluation kit for the IOP332 chipset.
-
-endmenu
-
-endif
diff --git a/arch/arm/mach-iop33x/Makefile b/arch/arm/mach-iop33x/Makefile
deleted file mode 100644
index 320ecde1f907..000000000000
--- a/arch/arm/mach-iop33x/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Makefile for the linux kernel.
-#
-
-obj-y := irq.o uart.o
-
-obj-$(CONFIG_ARCH_IQ80331) += iq80331.o
-obj-$(CONFIG_MACH_IQ80332) += iq80332.o
diff --git a/arch/arm/mach-iop33x/Makefile.boot b/arch/arm/mach-iop33x/Makefile.boot
deleted file mode 100644
index e4dd1d26038f..000000000000
--- a/arch/arm/mach-iop33x/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
- zreladdr-y += 0x00008000
-params_phys-y := 0x00000100
-initrd_phys-y := 0x00800000
diff --git a/arch/arm/mach-iop33x/include/mach/adma.h b/arch/arm/mach-iop33x/include/mach/adma.h
deleted file mode 100644
index 8aa7159ab6d8..000000000000
--- a/arch/arm/mach-iop33x/include/mach/adma.h
+++ /dev/null
@@ -1,6 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef IOP33X_ADMA_H
-#define IOP33X_ADMA_H
-#include <asm/hardware/iop3xx-adma.h>
-#endif
-
diff --git a/arch/arm/mach-iop33x/include/mach/entry-macro.S b/arch/arm/mach-iop33x/include/mach/entry-macro.S
deleted file mode 100644
index 0a398fe1fba4..000000000000
--- a/arch/arm/mach-iop33x/include/mach/entry-macro.S
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * arch/arm/mach-iop33x/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for IOP33x-based platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <mach/iop33x.h>
-
- .macro get_irqnr_preamble, base, tmp
- mrc p15, 0, \tmp, c15, c1, 0
- orr \tmp, \tmp, #(1 << 6)
- mcr p15, 0, \tmp, c15, c1, 0 @ Enable cp6 access
- mrc p15, 0, \tmp, c15, c1, 0
- mov \tmp, \tmp
- sub pc, pc, #4 @ cp_wait
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- mrc p6, 0, \irqstat, c14, c0, 0 @ Read IINTVEC
- cmp \irqstat, #0
- mrceq p6, 0, \irqstat, c14, c0, 0 @ erratum 63 workaround
- adds \irqnr, \irqstat, #1
- movne \irqnr, \irqstat, lsr #2
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- mrc p15, 0, \tmp1, c15, c1, 0
- ands \tmp2, \tmp1, #(1 << 6)
- bicne \tmp1, \tmp1, #(1 << 6)
- mcrne p15, 0, \tmp1, c15, c1, 0 @ Disable cp6 access
- .endm
diff --git a/arch/arm/mach-iop33x/include/mach/hardware.h b/arch/arm/mach-iop33x/include/mach/hardware.h
deleted file mode 100644
index 020bafbc36a5..000000000000
--- a/arch/arm/mach-iop33x/include/mach/hardware.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/arm/mach-iop33x/include/mach/hardware.h
- */
-
-#ifndef __HARDWARE_H
-#define __HARDWARE_H
-
-#include <asm/types.h>
-
-/*
- * Note about PCI IO space mappings
- *
- * To make IO space accesses efficient, we store virtual addresses in
- * the IO resources.
- *
- * The PCI IO space is located at virtual 0xfe000000 from physical
- * 0x90000000. The PCI BARs must be programmed with physical addresses,
- * but when we read them, we convert them to virtual addresses. See
- * arch/arm/mach-iop3xx/iop3xx-pci.c
- */
-
-#ifndef __ASSEMBLY__
-void iop33x_init_irq(void);
-
-extern struct platform_device iop33x_uart0_device;
-extern struct platform_device iop33x_uart1_device;
-#endif
-
-
-/*
- * Generic chipset bits
- *
- */
-#include "iop33x.h"
-
-/*
- * Board specific bits
- */
-#include "iq80331.h"
-#include "iq80332.h"
-
-
-#endif
diff --git a/arch/arm/mach-iop33x/include/mach/iop33x.h b/arch/arm/mach-iop33x/include/mach/iop33x.h
deleted file mode 100644
index 0c7041ed7a60..000000000000
--- a/arch/arm/mach-iop33x/include/mach/iop33x.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-iop33x/include/mach/iop33x.h
- *
- * Intel IOP33X Chip definitions
- *
- * Author: Dave Jiang (dave.jiang@intel.com)
- * Copyright (C) 2003, 2004 Intel Corp.
- */
-
-#ifndef __IOP33X_H
-#define __IOP33X_H
-
-/*
- * Peripherals that are shared between the iop32x and iop33x but
- * located at different addresses.
- */
-#define IOP3XX_TIMER_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x07d0 + (reg))
-
-#include <asm/hardware/iop3xx.h>
-
-/* UARTs */
-#define IOP33X_UART0_PHYS (IOP3XX_PERIPHERAL_PHYS_BASE + 0x1700)
-#define IOP33X_UART0_VIRT (IOP3XX_PERIPHERAL_VIRT_BASE + 0x1700)
-#define IOP33X_UART1_PHYS (IOP3XX_PERIPHERAL_PHYS_BASE + 0x1740)
-#define IOP33X_UART1_VIRT (IOP3XX_PERIPHERAL_VIRT_BASE + 0x1740)
-
-/* ATU Parameters
- * set up a 1:1 bus to physical ram relationship
- * w/ pci on top of physical ram in memory map
- */
-#define IOP33X_MAX_RAM_SIZE 0x80000000UL
-#define IOP3XX_MAX_RAM_SIZE IOP33X_MAX_RAM_SIZE
-#define IOP3XX_PCI_LOWER_MEM_BA (PHYS_OFFSET + IOP33X_MAX_RAM_SIZE)
-
-
-#endif
diff --git a/arch/arm/mach-iop33x/include/mach/iq80331.h b/arch/arm/mach-iop33x/include/mach/iq80331.h
deleted file mode 100644
index c7e68d863e44..000000000000
--- a/arch/arm/mach-iop33x/include/mach/iq80331.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/arm/mach-iop33x/include/mach/iq80331.h
- *
- * Intel IQ80331 evaluation board registers
- */
-
-#ifndef __IQ80331_H
-#define __IQ80331_H
-
-#define IQ80331_7SEG_1 0xce840000 /* 7-Segment MSB */
-#define IQ80331_7SEG_0 0xce850000 /* 7-Segment LSB (WO) */
-#define IQ80331_ROTARY_SW 0xce8d0000 /* Rotary Switch */
-#define IQ80331_BATT_STAT 0xce8f0000 /* Battery Status */
-
-
-#endif
diff --git a/arch/arm/mach-iop33x/include/mach/iq80332.h b/arch/arm/mach-iop33x/include/mach/iq80332.h
deleted file mode 100644
index 749b44bf7f62..000000000000
--- a/arch/arm/mach-iop33x/include/mach/iq80332.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/arm/mach-iop33x/include/mach/iq80332.h
- *
- * Intel IQ80332 evaluation board registers
- */
-
-#ifndef __IQ80332_H
-#define __IQ80332_H
-
-#define IQ80332_7SEG_1 0xce840000 /* 7-Segment MSB */
-#define IQ80332_7SEG_0 0xce850000 /* 7-Segment LSB (WO) */
-#define IQ80332_ROTARY_SW 0xce8d0000 /* Rotary Switch */
-#define IQ80332_BATT_STAT 0xce8f0000 /* Battery Status */
-
-
-#endif
diff --git a/arch/arm/mach-iop33x/include/mach/irqs.h b/arch/arm/mach-iop33x/include/mach/irqs.h
deleted file mode 100644
index cc3dce0ad4a1..000000000000
--- a/arch/arm/mach-iop33x/include/mach/irqs.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-iop33x/include/mach/irqs.h
- *
- * Author: Dave Jiang (dave.jiang@intel.com)
- * Copyright: (C) 2003 Intel Corp.
- */
-
-#ifndef __IRQS_H
-#define __IRQS_H
-
-/*
- * IOP80331 chipset interrupts
- */
-#define IRQ_IOP33X_DMA0_EOT 0
-#define IRQ_IOP33X_DMA0_EOC 1
-#define IRQ_IOP33X_DMA1_EOT 2
-#define IRQ_IOP33X_DMA1_EOC 3
-#define IRQ_IOP33X_AA_EOT 6
-#define IRQ_IOP33X_AA_EOC 7
-#define IRQ_IOP33X_TIMER0 8
-#define IRQ_IOP33X_TIMER1 9
-#define IRQ_IOP33X_I2C_0 10
-#define IRQ_IOP33X_I2C_1 11
-#define IRQ_IOP33X_MSG 12
-#define IRQ_IOP33X_MSGIBQ 13
-#define IRQ_IOP33X_ATU_BIST 14
-#define IRQ_IOP33X_PERFMON 15
-#define IRQ_IOP33X_CORE_PMU 16
-#define IRQ_IOP33X_XINT0 24
-#define IRQ_IOP33X_XINT1 25
-#define IRQ_IOP33X_XINT2 26
-#define IRQ_IOP33X_XINT3 27
-#define IRQ_IOP33X_XINT8 32
-#define IRQ_IOP33X_XINT9 33
-#define IRQ_IOP33X_XINT10 34
-#define IRQ_IOP33X_XINT11 35
-#define IRQ_IOP33X_XINT12 36
-#define IRQ_IOP33X_XINT13 37
-#define IRQ_IOP33X_XINT14 38
-#define IRQ_IOP33X_XINT15 39
-#define IRQ_IOP33X_UART0 51
-#define IRQ_IOP33X_UART1 52
-#define IRQ_IOP33X_PBIE 53
-#define IRQ_IOP33X_ATU_CRW 54
-#define IRQ_IOP33X_ATU_ERR 55
-#define IRQ_IOP33X_MCU_ERR 56
-#define IRQ_IOP33X_DMA0_ERR 57
-#define IRQ_IOP33X_DMA1_ERR 58
-#define IRQ_IOP33X_AA_ERR 60
-#define IRQ_IOP33X_MSG_ERR 62
-#define IRQ_IOP33X_HPI 63
-
-#define NR_IRQS 64
-
-
-#endif
diff --git a/arch/arm/mach-iop33x/include/mach/time.h b/arch/arm/mach-iop33x/include/mach/time.h
deleted file mode 100644
index 801f8fd644ad..000000000000
--- a/arch/arm/mach-iop33x/include/mach/time.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _IOP33X_TIME_H_
-#define _IOP33X_TIME_H_
-#define IRQ_IOP_TIMER0 IRQ_IOP33X_TIMER0
-#endif
diff --git a/arch/arm/mach-iop33x/include/mach/uncompress.h b/arch/arm/mach-iop33x/include/mach/uncompress.h
deleted file mode 100644
index 62b71cde1f79..000000000000
--- a/arch/arm/mach-iop33x/include/mach/uncompress.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/arm/mach-iop33x/include/mach/uncompress.h
- */
-
-#include <asm/types.h>
-#include <asm/mach-types.h>
-#include <linux/serial_reg.h>
-#include <mach/hardware.h>
-
-volatile u32 *uart_base;
-
-#define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE)
-
-static inline void putc(char c)
-{
- while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
- barrier();
- uart_base[UART_TX] = c;
-}
-
-static inline void flush(void)
-{
-}
-
-static __inline__ void __arch_decomp_setup(unsigned long arch_id)
-{
- if (machine_is_iq80331() || machine_is_iq80332())
- uart_base = (volatile u32 *)IOP33X_UART0_PHYS;
- else
- uart_base = (volatile u32 *)0xfe800000;
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup() __arch_decomp_setup(arch_id)
diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c
deleted file mode 100644
index ab74fbabc749..000000000000
--- a/arch/arm/mach-iop33x/iq80331.c
+++ /dev/null
@@ -1,148 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-iop33x/iq80331.c
- *
- * Board support code for the Intel IQ80331 platform.
- *
- * Author: Dave Jiang <dave.jiang@intel.com>
- * Copyright (C) 2003 Intel Corp.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/string.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/pci.h>
-#include <asm/mach/time.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <mach/time.h>
-
-/*
- * IQ80331 timer tick configuration.
- */
-static void __init iq80331_timer_init(void)
-{
- /* D-Step parts run at a higher internal bus frequency */
- if (*IOP3XX_ATURID >= 0xa)
- iop_init_time(333000000);
- else
- iop_init_time(266000000);
-}
-
-
-/*
- * IQ80331 PCI.
- */
-static int __init
-iq80331_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- int irq;
-
- if (slot == 1 && pin == 1) {
- /* PCI-X Slot INTA */
- irq = IRQ_IOP33X_XINT1;
- } else if (slot == 1 && pin == 2) {
- /* PCI-X Slot INTB */
- irq = IRQ_IOP33X_XINT2;
- } else if (slot == 1 && pin == 3) {
- /* PCI-X Slot INTC */
- irq = IRQ_IOP33X_XINT3;
- } else if (slot == 1 && pin == 4) {
- /* PCI-X Slot INTD */
- irq = IRQ_IOP33X_XINT0;
- } else if (slot == 2) {
- /* GigE */
- irq = IRQ_IOP33X_XINT2;
- } else {
- printk(KERN_ERR "iq80331_pci_map_irq() called for unknown "
- "device PCI:%d:%d:%d\n", dev->bus->number,
- PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
- irq = -1;
- }
-
- return irq;
-}
-
-static struct hw_pci iq80331_pci __initdata = {
- .nr_controllers = 1,
- .ops = &iop3xx_ops,
- .setup = iop3xx_pci_setup,
- .preinit = iop3xx_pci_preinit_cond,
- .map_irq = iq80331_pci_map_irq,
-};
-
-static int __init iq80331_pci_init(void)
-{
- if ((iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE) &&
- machine_is_iq80331())
- pci_common_init(&iq80331_pci);
-
- return 0;
-}
-
-subsys_initcall(iq80331_pci_init);
-
-
-/*
- * IQ80331 machine initialisation.
- */
-static struct physmap_flash_data iq80331_flash_data = {
- .width = 1,
-};
-
-static struct resource iq80331_flash_resource = {
- .start = 0xc0000000,
- .end = 0xc07fffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device iq80331_flash_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &iq80331_flash_data,
- },
- .num_resources = 1,
- .resource = &iq80331_flash_resource,
-};
-
-static struct resource iq80331_gpio_res[] = {
- DEFINE_RES_MEM((IOP3XX_PERIPHERAL_PHYS_BASE + 0x1780), 0x10),
-};
-
-static void __init iq80331_init_machine(void)
-{
- platform_device_register_simple("gpio-iop", 0,
- iq80331_gpio_res,
- ARRAY_SIZE(iq80331_gpio_res));
- platform_device_register(&iop3xx_i2c0_device);
- platform_device_register(&iop3xx_i2c1_device);
- platform_device_register(&iop33x_uart0_device);
- platform_device_register(&iop33x_uart1_device);
- platform_device_register(&iq80331_flash_device);
- platform_device_register(&iop3xx_dma_0_channel);
- platform_device_register(&iop3xx_dma_1_channel);
- platform_device_register(&iop3xx_aau_channel);
-}
-
-MACHINE_START(IQ80331, "Intel IQ80331")
- /* Maintainer: Intel Corp. */
- .atag_offset = 0x100,
- .map_io = iop3xx_map_io,
- .init_irq = iop33x_init_irq,
- .init_time = iq80331_timer_init,
- .init_machine = iq80331_init_machine,
- .restart = iop3xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c
deleted file mode 100644
index 2e309b197aa4..000000000000
--- a/arch/arm/mach-iop33x/iq80332.c
+++ /dev/null
@@ -1,148 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-iop33x/iq80332.c
- *
- * Board support code for the Intel IQ80332 platform.
- *
- * Author: Dave Jiang <dave.jiang@intel.com>
- * Copyright (C) 2004 Intel Corp.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/string.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/pci.h>
-#include <asm/mach/time.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <mach/time.h>
-
-/*
- * IQ80332 timer tick configuration.
- */
-static void __init iq80332_timer_init(void)
-{
- /* D-Step parts and the iop333 run at a higher internal bus frequency */
- if (*IOP3XX_ATURID >= 0xa || *IOP3XX_ATUDID == 0x374)
- iop_init_time(333000000);
- else
- iop_init_time(266000000);
-}
-
-
-/*
- * IQ80332 PCI.
- */
-static int __init
-iq80332_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- int irq;
-
- if (slot == 4 && pin == 1) {
- /* PCI-X Slot INTA */
- irq = IRQ_IOP33X_XINT0;
- } else if (slot == 4 && pin == 2) {
- /* PCI-X Slot INTB */
- irq = IRQ_IOP33X_XINT1;
- } else if (slot == 4 && pin == 3) {
- /* PCI-X Slot INTC */
- irq = IRQ_IOP33X_XINT2;
- } else if (slot == 4 && pin == 4) {
- /* PCI-X Slot INTD */
- irq = IRQ_IOP33X_XINT3;
- } else if (slot == 6) {
- /* GigE */
- irq = IRQ_IOP33X_XINT2;
- } else {
- printk(KERN_ERR "iq80332_pci_map_irq() called for unknown "
- "device PCI:%d:%d:%d\n", dev->bus->number,
- PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
- irq = -1;
- }
-
- return irq;
-}
-
-static struct hw_pci iq80332_pci __initdata = {
- .nr_controllers = 1,
- .ops = &iop3xx_ops,
- .setup = iop3xx_pci_setup,
- .preinit = iop3xx_pci_preinit_cond,
- .map_irq = iq80332_pci_map_irq,
-};
-
-static int __init iq80332_pci_init(void)
-{
- if ((iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE) &&
- machine_is_iq80332())
- pci_common_init(&iq80332_pci);
-
- return 0;
-}
-
-subsys_initcall(iq80332_pci_init);
-
-
-/*
- * IQ80332 machine initialisation.
- */
-static struct physmap_flash_data iq80332_flash_data = {
- .width = 1,
-};
-
-static struct resource iq80332_flash_resource = {
- .start = 0xc0000000,
- .end = 0xc07fffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device iq80332_flash_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &iq80332_flash_data,
- },
- .num_resources = 1,
- .resource = &iq80332_flash_resource,
-};
-
-static struct resource iq80332_gpio_res[] = {
- DEFINE_RES_MEM((IOP3XX_PERIPHERAL_PHYS_BASE + 0x1780), 0x10),
-};
-
-static void __init iq80332_init_machine(void)
-{
- platform_device_register_simple("gpio-iop", 0,
- iq80332_gpio_res,
- ARRAY_SIZE(iq80332_gpio_res));
- platform_device_register(&iop3xx_i2c0_device);
- platform_device_register(&iop3xx_i2c1_device);
- platform_device_register(&iop33x_uart0_device);
- platform_device_register(&iop33x_uart1_device);
- platform_device_register(&iq80332_flash_device);
- platform_device_register(&iop3xx_dma_0_channel);
- platform_device_register(&iop3xx_dma_1_channel);
- platform_device_register(&iop3xx_aau_channel);
-}
-
-MACHINE_START(IQ80332, "Intel IQ80332")
- /* Maintainer: Intel Corp. */
- .atag_offset = 0x100,
- .map_io = iop3xx_map_io,
- .init_irq = iop33x_init_irq,
- .init_time = iq80332_timer_init,
- .init_machine = iq80332_init_machine,
- .restart = iop3xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-iop33x/irq.c b/arch/arm/mach-iop33x/irq.c
deleted file mode 100644
index 03ad7d3a8f49..000000000000
--- a/arch/arm/mach-iop33x/irq.c
+++ /dev/null
@@ -1,115 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-iop33x/irq.c
- *
- * Generic IOP331 IRQ handling functionality
- *
- * Author: Dave Jiang <dave.jiang@intel.com>
- * Copyright (C) 2003 Intel Corp.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <asm/mach/irq.h>
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
-static u32 iop33x_mask0;
-static u32 iop33x_mask1;
-
-static void intctl0_write(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c0, c0, 0" : : "r" (val));
-}
-
-static void intctl1_write(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c1, c0, 0" : : "r" (val));
-}
-
-static void intstr0_write(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c2, c0, 0" : : "r" (val));
-}
-
-static void intstr1_write(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c3, c0, 0" : : "r" (val));
-}
-
-static void intbase_write(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c12, c0, 0" : : "r" (val));
-}
-
-static void intsize_write(u32 val)
-{
- asm volatile("mcr p6, 0, %0, c13, c0, 0" : : "r" (val));
-}
-
-static void
-iop33x_irq_mask1 (struct irq_data *d)
-{
- iop33x_mask0 &= ~(1 << d->irq);
- intctl0_write(iop33x_mask0);
-}
-
-static void
-iop33x_irq_mask2 (struct irq_data *d)
-{
- iop33x_mask1 &= ~(1 << (d->irq - 32));
- intctl1_write(iop33x_mask1);
-}
-
-static void
-iop33x_irq_unmask1(struct irq_data *d)
-{
- iop33x_mask0 |= 1 << d->irq;
- intctl0_write(iop33x_mask0);
-}
-
-static void
-iop33x_irq_unmask2(struct irq_data *d)
-{
- iop33x_mask1 |= (1 << (d->irq - 32));
- intctl1_write(iop33x_mask1);
-}
-
-struct irq_chip iop33x_irqchip1 = {
- .name = "IOP33x-1",
- .irq_ack = iop33x_irq_mask1,
- .irq_mask = iop33x_irq_mask1,
- .irq_unmask = iop33x_irq_unmask1,
-};
-
-struct irq_chip iop33x_irqchip2 = {
- .name = "IOP33x-2",
- .irq_ack = iop33x_irq_mask2,
- .irq_mask = iop33x_irq_mask2,
- .irq_unmask = iop33x_irq_unmask2,
-};
-
-void __init iop33x_init_irq(void)
-{
- int i;
-
- iop_init_cp6_handler();
-
- intctl0_write(0);
- intctl1_write(0);
- intstr0_write(0);
- intstr1_write(0);
- intbase_write(0);
- intsize_write(1);
- if (machine_is_iq80331())
- *IOP3XX_PCIIRSR = 0x0f;
-
- for (i = 0; i < NR_IRQS; i++) {
- irq_set_chip_and_handler(i,
- (i < 32) ? &iop33x_irqchip1 : &iop33x_irqchip2,
- handle_level_irq);
- irq_clear_status_flags(i, IRQ_NOREQUEST | IRQ_NOPROBE);
- }
-}
diff --git a/arch/arm/mach-iop33x/uart.c b/arch/arm/mach-iop33x/uart.c
deleted file mode 100644
index 8fa079d2e3c3..000000000000
--- a/arch/arm/mach-iop33x/uart.c
+++ /dev/null
@@ -1,100 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-iop33x/uart.c
- *
- * Author: Dave Jiang (dave.jiang@intel.com)
- * Copyright (C) 2004 Intel Corporation.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/major.h>
-#include <linux/fs.h>
-#include <linux/platform_device.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_8250.h>
-#include <linux/io.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/mach/map.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <mach/hardware.h>
-#include <asm/hardware/iop3xx.h>
-#include <asm/mach/arch.h>
-
-#define IOP33X_UART_XTAL 33334000
-
-static struct plat_serial8250_port iop33x_uart0_data[] = {
- {
- .membase = (char *)IOP33X_UART0_VIRT,
- .mapbase = IOP33X_UART0_PHYS,
- .irq = IRQ_IOP33X_UART0,
- .uartclk = IOP33X_UART_XTAL,
- .regshift = 2,
- .iotype = UPIO_MEM,
- .flags = UPF_SKIP_TEST,
- },
- { },
-};
-
-static struct resource iop33x_uart0_resources[] = {
- [0] = {
- .start = IOP33X_UART0_PHYS,
- .end = IOP33X_UART0_PHYS + 0x3f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_IOP33X_UART0,
- .end = IRQ_IOP33X_UART0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device iop33x_uart0_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = iop33x_uart0_data,
- },
- .num_resources = 2,
- .resource = iop33x_uart0_resources,
-};
-
-
-static struct resource iop33x_uart1_resources[] = {
- [0] = {
- .start = IOP33X_UART1_PHYS,
- .end = IOP33X_UART1_PHYS + 0x3f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_IOP33X_UART1,
- .end = IRQ_IOP33X_UART1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct plat_serial8250_port iop33x_uart1_data[] = {
- {
- .membase = (char *)IOP33X_UART1_VIRT,
- .mapbase = IOP33X_UART1_PHYS,
- .irq = IRQ_IOP33X_UART1,
- .uartclk = IOP33X_UART_XTAL,
- .regshift = 2,
- .iotype = UPIO_MEM,
- .flags = UPF_SKIP_TEST,
- },
- { },
-};
-
-struct platform_device iop33x_uart1_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM1,
- .dev = {
- .platform_data = iop33x_uart1_data,
- },
- .num_resources = 2,
- .resource = iop33x_uart1_resources,
-};
diff --git a/arch/arm/plat-iop/Makefile b/arch/arm/plat-iop/Makefile
index 4d839a3cf284..86e354b9065d 100644
--- a/arch/arm/plat-iop/Makefile
+++ b/arch/arm/plat-iop/Makefile
@@ -12,17 +12,3 @@ obj-$(CONFIG_ARCH_IOP32X) += cp6.o
obj-$(CONFIG_ARCH_IOP32X) += adma.o
obj-$(CONFIG_ARCH_IOP32X) += pmu.o
obj-$(CONFIG_ARCH_IOP32X) += restart.o
-
-# IOP33X
-obj-$(CONFIG_ARCH_IOP33X) += i2c.o
-obj-$(CONFIG_ARCH_IOP33X) += pci.o
-obj-$(CONFIG_ARCH_IOP33X) += setup.o
-obj-$(CONFIG_ARCH_IOP33X) += time.o
-obj-$(CONFIG_ARCH_IOP33X) += cp6.o
-obj-$(CONFIG_ARCH_IOP33X) += adma.o
-obj-$(CONFIG_ARCH_IOP33X) += pmu.o
-obj-$(CONFIG_ARCH_IOP33X) += restart.o
-
-# IOP13XX
-obj-$(CONFIG_ARCH_IOP13XX) += cp6.o
-obj-$(CONFIG_ARCH_IOP13XX) += time.o
diff --git a/arch/arm/plat-iop/adma.c b/arch/arm/plat-iop/adma.c
index b8e360299293..368496471e60 100644
--- a/arch/arm/plat-iop/adma.c
+++ b/arch/arm/plat-iop/adma.c
@@ -9,7 +9,6 @@
#include <mach/adma.h>
#include <asm/hardware/iop_adma.h>
-#ifdef CONFIG_ARCH_IOP32X
#define IRQ_DMA0_EOT IRQ_IOP32X_DMA0_EOT
#define IRQ_DMA0_EOC IRQ_IOP32X_DMA0_EOC
#define IRQ_DMA0_ERR IRQ_IOP32X_DMA0_ERR
@@ -21,20 +20,7 @@
#define IRQ_AA_EOT IRQ_IOP32X_AA_EOT
#define IRQ_AA_EOC IRQ_IOP32X_AA_EOC
#define IRQ_AA_ERR IRQ_IOP32X_AA_ERR
-#endif
-#ifdef CONFIG_ARCH_IOP33X
-#define IRQ_DMA0_EOT IRQ_IOP33X_DMA0_EOT
-#define IRQ_DMA0_EOC IRQ_IOP33X_DMA0_EOC
-#define IRQ_DMA0_ERR IRQ_IOP33X_DMA0_ERR
-
-#define IRQ_DMA1_EOT IRQ_IOP33X_DMA1_EOT
-#define IRQ_DMA1_EOC IRQ_IOP33X_DMA1_EOC
-#define IRQ_DMA1_ERR IRQ_IOP33X_DMA1_ERR
-
-#define IRQ_AA_EOT IRQ_IOP33X_AA_EOT
-#define IRQ_AA_EOC IRQ_IOP33X_AA_EOC
-#define IRQ_AA_ERR IRQ_IOP33X_AA_ERR
-#endif
+
/* AAU and DMA Channels */
static struct resource iop3xx_dma_0_resources[] = {
[0] = {
@@ -161,30 +147,14 @@ struct platform_device iop3xx_aau_channel = {
static int __init iop3xx_adma_cap_init(void)
{
- #ifdef CONFIG_ARCH_IOP32X /* the 32x DMA does not perform CRC32C */
- dma_cap_set(DMA_MEMCPY, iop3xx_dma_0_data.cap_mask);
- dma_cap_set(DMA_INTERRUPT, iop3xx_dma_0_data.cap_mask);
- #else
dma_cap_set(DMA_MEMCPY, iop3xx_dma_0_data.cap_mask);
dma_cap_set(DMA_INTERRUPT, iop3xx_dma_0_data.cap_mask);
- #endif
- #ifdef CONFIG_ARCH_IOP32X /* the 32x DMA does not perform CRC32C */
dma_cap_set(DMA_MEMCPY, iop3xx_dma_1_data.cap_mask);
dma_cap_set(DMA_INTERRUPT, iop3xx_dma_1_data.cap_mask);
- #else
- dma_cap_set(DMA_MEMCPY, iop3xx_dma_1_data.cap_mask);
- dma_cap_set(DMA_INTERRUPT, iop3xx_dma_1_data.cap_mask);
- #endif
- #ifdef CONFIG_ARCH_IOP32X /* the 32x AAU does not perform zero sum */
- dma_cap_set(DMA_XOR, iop3xx_aau_data.cap_mask);
- dma_cap_set(DMA_INTERRUPT, iop3xx_aau_data.cap_mask);
- #else
dma_cap_set(DMA_XOR, iop3xx_aau_data.cap_mask);
- dma_cap_set(DMA_XOR_VAL, iop3xx_aau_data.cap_mask);
dma_cap_set(DMA_INTERRUPT, iop3xx_aau_data.cap_mask);
- #endif
return 0;
}
diff --git a/arch/arm/plat-iop/i2c.c b/arch/arm/plat-iop/i2c.c
index dfbd7c332866..8d5fe349c7cd 100644
--- a/arch/arm/plat-iop/i2c.c
+++ b/arch/arm/plat-iop/i2c.c
@@ -26,15 +26,6 @@
#include <asm/hardware/iop3xx.h>
#include <asm/mach/arch.h>
-#ifdef CONFIG_ARCH_IOP32X
-#define IRQ_IOP3XX_I2C_0 IRQ_IOP32X_I2C_0
-#define IRQ_IOP3XX_I2C_1 IRQ_IOP32X_I2C_1
-#endif
-#ifdef CONFIG_ARCH_IOP33X
-#define IRQ_IOP3XX_I2C_0 IRQ_IOP33X_I2C_0
-#define IRQ_IOP3XX_I2C_1 IRQ_IOP33X_I2C_1
-#endif
-
/*
* Each of the I2C busses have corresponding GPIO lines, and the driver
* need to access these directly to drive the bus low at times.
@@ -65,8 +56,8 @@ static struct resource iop3xx_i2c0_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_IOP3XX_I2C_0,
- .end = IRQ_IOP3XX_I2C_0,
+ .start = IRQ_IOP32X_I2C_0,
+ .end = IRQ_IOP32X_I2C_0,
.flags = IORESOURCE_IRQ,
},
};
@@ -86,8 +77,8 @@ static struct resource iop3xx_i2c1_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_IOP3XX_I2C_1,
- .end = IRQ_IOP3XX_I2C_1,
+ .start = IRQ_IOP32X_I2C_1,
+ .end = IRQ_IOP32X_I2C_1,
.flags = IORESOURCE_IRQ,
}
};
diff --git a/arch/arm/plat-iop/pmu.c b/arch/arm/plat-iop/pmu.c
index 04c44a809b32..3834142c17f4 100644
--- a/arch/arm/plat-iop/pmu.c
+++ b/arch/arm/plat-iop/pmu.c
@@ -8,14 +8,8 @@
#include <mach/irqs.h>
static struct resource pmu_resource = {
-#ifdef CONFIG_ARCH_IOP32X
.start = IRQ_IOP32X_CORE_PMU,
.end = IRQ_IOP32X_CORE_PMU,
-#endif
-#ifdef CONFIG_ARCH_IOP33X
- .start = IRQ_IOP33X_CORE_PMU,
- .end = IRQ_IOP33X_CORE_PMU,
-#endif
.flags = IORESOURCE_IRQ,
};
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 03fa0c58cef3..cc84863bc52b 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -295,7 +295,7 @@ config INTEL_IOATDMA
config INTEL_IOP_ADMA
tristate "Intel IOP ADMA support"
- depends on ARCH_IOP32X || ARCH_IOP33X || ARCH_IOP13XX
+ depends on ARCH_IOP32X
select DMA_ENGINE
select ASYNC_TX_ENABLE_CHANNEL_SWITCH
help
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index bb13c266c329..6d4bc584efc4 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -275,7 +275,7 @@ config GPIO_ICH
config GPIO_IOP
tristate "Intel IOP GPIO"
- depends on ARCH_IOP32X || ARCH_IOP33X || COMPILE_TEST
+ depends on ARCH_IOP32X || COMPILE_TEST
select GPIO_GENERIC
help
Say yes here to support the GPIO functionality of a number of Intel
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 09367fc014c3..f8c77edf70d0 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -684,7 +684,7 @@ config I2C_IMX_LPI2C
config I2C_IOP3XX
tristate "Intel IOPx3xx and IXP4xx on-chip I2C interface"
- depends on ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX || ARCH_IOP13XX
+ depends on ARCH_IOP32X || ARCH_IXP4XX
help
Say Y here if you want to use the IIC bus controller on
the Intel IOPx3xx I/O Processors or IXP4xx Network Processors.
--
2.20.0
^ permalink raw reply related [flat|nested] 21+ messages in thread