dmaengine Archive on
 help / color / Atom feed
From: Vinod Koul <>
To: Baolin Wang <>
Subject: Re: [PATCH] dmaengine: sprd: Fix the DMA link-list configuration
Date: Wed, 4 Sep 2019 11:25:55 +0530
Message-ID: <20190904055555.GD2672@vkoul-mobl> (raw)
In-Reply-To: <>

On 30-08-19, 15:37, Baolin Wang wrote:
> For the Spreadtrum DMA link-list mode, when the DMA engine got a slave
> hardware request, which will trigger the DMA engine to load the DMA
> configuration from the link-list memory automatically. But before the
> slave hardware request, the slave will get an incorrect residue due
> to the first node used to trigger the link-list was configured as the
> last source address and destination address.
> Thus we should make sure the first node was configured the start source
> address and destination address, which can fix this issue.

Applied, thanks


      reply index

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-30  7:37 Baolin Wang
2019-09-04  5:55 ` Vinod Koul [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190904055555.GD2672@vkoul-mobl \ \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

dmaengine Archive on

Archives are clonable:
	git clone --mirror dmaengine/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dmaengine dmaengine/ \
	public-inbox-index dmaengine

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone