dmaengine Archive on lore.kernel.org
 help / color / Atom feed
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: <vkoul@kernel.org>, <robh+dt@kernel.org>, <nm@ti.com>,
	<ssantosh@kernel.org>
Cc: <dan.j.williams@intel.com>, <dmaengine@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<grygorii.strashko@ti.com>, <lokeshvutla@ti.com>,
	<t-kristo@ti.com>, <tony@atomide.com>, <j-keerthy@ti.com>
Subject: [PATCH v3 04/14] dmaengine: Add metadata_ops for dma_async_tx_descriptor
Date: Tue, 1 Oct 2019 09:16:54 +0300
Message-ID: <20191001061704.2399-5-peter.ujfalusi@ti.com> (raw)
In-Reply-To: <20191001061704.2399-1-peter.ujfalusi@ti.com>

The metadata is best described as side band data or parameters traveling
alongside the data DMAd by the DMA engine. It is data
which is understood by the peripheral and the peripheral driver only, the
DMA engine see it only as data block and it is not interpreting it in any
way.

The metadata can be different per descriptor as it is a parameter for the
data being transferred.

If the DMA supports per descriptor metadata it can implement the attach,
get_ptr/set_len callbacks.

Client drivers must only use either attach or get_ptr/set_len to avoid
misconfiguration.

Client driver can check if a given metadata mode is supported by the
channel during probe time with
dmaengine_is_metadata_mode_supported(chan, DESC_METADATA_CLIENT);
dmaengine_is_metadata_mode_supported(chan, DESC_METADATA_ENGINE);

and based on this information can use either mode.

Wrappers are also added for the metadata_ops.

To be used in DESC_METADATA_CLIENT mode:
dmaengine_desc_attach_metadata()

To be used in DESC_METADATA_ENGINE mode:
dmaengine_desc_get_metadata_ptr()
dmaengine_desc_set_metadata_len()

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 drivers/dma/dmaengine.c   |  73 ++++++++++++++++++++++++++
 include/linux/dmaengine.h | 108 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 181 insertions(+)

diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
index 03ac4b96117c..6baddf7dcbfd 100644
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -1302,6 +1302,79 @@ void dma_async_tx_descriptor_init(struct dma_async_tx_descriptor *tx,
 }
 EXPORT_SYMBOL(dma_async_tx_descriptor_init);
 
+static inline int desc_check_and_set_metadata_mode(
+	struct dma_async_tx_descriptor *desc, enum dma_desc_metadata_mode mode)
+{
+	/* Make sure that the metadata mode is not mixed */
+	if (!desc->desc_metadata_mode) {
+		if (dmaengine_is_metadata_mode_supported(desc->chan, mode))
+			desc->desc_metadata_mode = mode;
+		else
+			return -ENOTSUPP;
+	} else if (desc->desc_metadata_mode != mode) {
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+int dmaengine_desc_attach_metadata(struct dma_async_tx_descriptor *desc,
+				   void *data, size_t len)
+{
+	int ret;
+
+	if (!desc)
+		return -EINVAL;
+
+	ret = desc_check_and_set_metadata_mode(desc, DESC_METADATA_CLIENT);
+	if (ret)
+		return ret;
+
+	if (!desc->metadata_ops || !desc->metadata_ops->attach)
+		return -ENOTSUPP;
+
+	return desc->metadata_ops->attach(desc, data, len);
+}
+EXPORT_SYMBOL_GPL(dmaengine_desc_attach_metadata);
+
+void *dmaengine_desc_get_metadata_ptr(struct dma_async_tx_descriptor *desc,
+				      size_t *payload_len, size_t *max_len)
+{
+	int ret;
+
+	if (!desc)
+		return ERR_PTR(-EINVAL);
+
+	ret = desc_check_and_set_metadata_mode(desc, DESC_METADATA_ENGINE);
+	if (ret)
+		return ERR_PTR(ret);
+
+	if (!desc->metadata_ops || !desc->metadata_ops->get_ptr)
+		return ERR_PTR(-ENOTSUPP);
+
+	return desc->metadata_ops->get_ptr(desc, payload_len, max_len);
+}
+EXPORT_SYMBOL_GPL(dmaengine_desc_get_metadata_ptr);
+
+int dmaengine_desc_set_metadata_len(struct dma_async_tx_descriptor *desc,
+				    size_t payload_len)
+{
+	int ret;
+
+	if (!desc)
+		return -EINVAL;
+
+	ret = desc_check_and_set_metadata_mode(desc, DESC_METADATA_ENGINE);
+	if (ret)
+		return ret;
+
+	if (!desc->metadata_ops || !desc->metadata_ops->set_len)
+		return -ENOTSUPP;
+
+	return desc->metadata_ops->set_len(desc, payload_len);
+}
+EXPORT_SYMBOL_GPL(dmaengine_desc_set_metadata_len);
+
 /* dma_wait_for_async_tx - spin wait for a transaction to complete
  * @tx: in-flight transaction to wait on
  */
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index 8fcdee1c0cf9..40d062c3b359 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -219,6 +219,58 @@ typedef struct { DECLARE_BITMAP(bits, DMA_TX_TYPE_END); } dma_cap_mask_t;
  * @bytes_transferred: byte counter
  */
 
+/**
+ * enum dma_desc_metadata_mode - per descriptor metadata mode types supported
+ * @DESC_METADATA_CLIENT - the metadata buffer is allocated/provided by the
+ *  client driver and it is attached (via the dmaengine_desc_attach_metadata()
+ *  helper) to the descriptor.
+ *
+ * Client drivers interested to use this mode can follow:
+ * - DMA_MEM_TO_DEV / DEV_MEM_TO_MEM:
+ *   1. prepare the descriptor (dmaengine_prep_*)
+ *	construct the metadata in the client's buffer
+ *   2. use dmaengine_desc_attach_metadata() to attach the buffer to the
+ *	descriptor
+ *   3. submit the transfer
+ * - DMA_DEV_TO_MEM:
+ *   1. prepare the descriptor (dmaengine_prep_*)
+ *   2. use dmaengine_desc_attach_metadata() to attach the buffer to the
+ *	descriptor
+ *   3. submit the transfer
+ *   4. when the transfer is completed, the metadata should be available in the
+ *	attached buffer
+ *
+ * @DESC_METADATA_ENGINE - the metadata buffer is allocated/managed by the DMA
+ *  driver. The client driver can ask for the pointer, maximum size and the
+ *  currently used size of the metadata and can directly update or read it.
+ *  dmaengine_desc_get_metadata_ptr() and dmaengine_desc_set_metadata_len() is
+ *  provided as helper functions.
+ *
+ * Client drivers interested to use this mode can follow:
+ * - DMA_MEM_TO_DEV / DEV_MEM_TO_MEM:
+ *   1. prepare the descriptor (dmaengine_prep_*)
+ *   2. use dmaengine_desc_get_metadata_ptr() to get the pointer to the engine's
+ *	metadata area
+ *   3. update the metadata at the pointer
+ *   4. use dmaengine_desc_set_metadata_len()  to tell the DMA engine the amount
+ *	of data the client has placed into the metadata buffer
+ *   5. submit the transfer
+ * - DMA_DEV_TO_MEM:
+ *   1. prepare the descriptor (dmaengine_prep_*)
+ *   2. submit the transfer
+ *   3. on transfer completion, use dmaengine_desc_get_metadata_ptr() to get the
+ *	pointer to the engine's metadata are
+ *   4. Read out the metadate from the pointer
+ *
+ * Note: the two mode is not compatible and clients must use one mode for a
+ * descriptor.
+ */
+enum dma_desc_metadata_mode {
+	DESC_METADATA_NONE = 0,
+	DESC_METADATA_CLIENT = BIT(0),
+	DESC_METADATA_ENGINE = BIT(1),
+};
+
 struct dma_chan_percpu {
 	/* stats */
 	unsigned long memcpy_count;
@@ -475,6 +527,18 @@ struct dmaengine_unmap_data {
 	dma_addr_t addr[0];
 };
 
+struct dma_async_tx_descriptor;
+
+struct dma_descriptor_metadata_ops {
+	int (*attach)(struct dma_async_tx_descriptor *desc, void *data,
+		      size_t len);
+
+	void *(*get_ptr)(struct dma_async_tx_descriptor *desc,
+			 size_t *payload_len, size_t *max_len);
+	int (*set_len)(struct dma_async_tx_descriptor *desc,
+		       size_t payload_len);
+};
+
 /**
  * struct dma_async_tx_descriptor - async transaction descriptor
  * ---dma generic offload fields---
@@ -488,6 +552,11 @@ struct dmaengine_unmap_data {
  * descriptor pending. To be pushed on .issue_pending() call
  * @callback: routine to call after this operation is complete
  * @callback_param: general parameter to pass to the callback routine
+ * @desc_metadata_mode: core managed metadata mode to protect mixed use of
+ *	DESC_METADATA_CLIENT or DESC_METADATA_ENGINE. Otherwise
+ *	DESC_METADATA_NONE
+ * @metadata_ops: DMA driver provided metadata mode ops, need to be set by the
+ *	DMA driver if metadata mode is supported with the descriptor
  * ---async_tx api specific fields---
  * @next: at completion submit this descriptor
  * @parent: pointer to the next level up in the dependency chain
@@ -504,6 +573,8 @@ struct dma_async_tx_descriptor {
 	dma_async_tx_callback_result callback_result;
 	void *callback_param;
 	struct dmaengine_unmap_data *unmap;
+	enum dma_desc_metadata_mode desc_metadata_mode;
+	struct dma_descriptor_metadata_ops *metadata_ops;
 #ifdef CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH
 	struct dma_async_tx_descriptor *next;
 	struct dma_async_tx_descriptor *parent;
@@ -666,6 +737,7 @@ struct dma_filter {
  * @global_node: list_head for global dma_device_list
  * @filter: information for device/slave to filter function/param mapping
  * @cap_mask: one or more dma_capability flags
+ * @desc_metadata_modes: supported metadata modes by the DMA device
  * @max_xor: maximum number of xor sources, 0 if no capability
  * @max_pq: maximum number of PQ sources and PQ-continue capability
  * @copy_align: alignment shift for memcpy operations
@@ -727,6 +799,7 @@ struct dma_device {
 	struct list_head global_node;
 	struct dma_filter filter;
 	dma_cap_mask_t  cap_mask;
+	enum dma_desc_metadata_mode desc_metadata_modes;
 	unsigned short max_xor;
 	unsigned short max_pq;
 	enum dmaengine_alignment copy_align;
@@ -902,6 +975,41 @@ static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_memcpy(
 						    len, flags);
 }
 
+static inline bool dmaengine_is_metadata_mode_supported(struct dma_chan *chan,
+		enum dma_desc_metadata_mode mode)
+{
+	if (!chan)
+		return false;
+
+	return !!(chan->device->desc_metadata_modes & mode);
+}
+
+#ifdef CONFIG_DMA_ENGINE
+int dmaengine_desc_attach_metadata(struct dma_async_tx_descriptor *desc,
+				   void *data, size_t len);
+void *dmaengine_desc_get_metadata_ptr(struct dma_async_tx_descriptor *desc,
+				      size_t *payload_len, size_t *max_len);
+int dmaengine_desc_set_metadata_len(struct dma_async_tx_descriptor *desc,
+				    size_t payload_len);
+#else /* CONFIG_DMA_ENGINE */
+static inline int dmaengine_desc_attach_metadata(
+		struct dma_async_tx_descriptor *desc, void *data, size_t len)
+{
+	return -EINVAL;
+}
+static inline void *dmaengine_desc_get_metadata_ptr(
+		struct dma_async_tx_descriptor *desc, size_t *payload_len,
+		size_t *max_len)
+{
+	return NULL;
+}
+static inline int dmaengine_desc_set_metadata_len(
+		struct dma_async_tx_descriptor *desc, size_t payload_len)
+{
+	return -EINVAL;
+}
+#endif /* CONFIG_DMA_ENGINE */
+
 /**
  * dmaengine_terminate_all() - Terminate all active DMA transfers
  * @chan: The channel for which to terminate the transfers
-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki


  parent reply index

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-01  6:16 [PATCH v3 00/14] dmaengine/soc: Add Texas Instruments UDMA support Peter Ujfalusi
2019-10-01  6:16 ` [PATCH v3 01/14] bindings: soc: ti: add documentation for k3 ringacc Peter Ujfalusi
2019-10-01  6:16 ` [PATCH v3 02/14] soc: ti: k3: add navss ringacc driver Peter Ujfalusi
2019-10-09  7:14   ` Tero Kristo
2019-10-09 13:27   ` Lokesh Vutla
2019-10-25  9:30     ` Peter Ujfalusi
2019-10-29  8:52   ` Lokesh Vutla
2019-10-30 13:10     ` Grygorii Strashko
2019-10-01  6:16 ` [PATCH v3 03/14] dmaengine: doc: Add sections for per descriptor metadata support Peter Ujfalusi
2019-10-09  7:30   ` Tero Kristo
2019-10-01  6:16 ` Peter Ujfalusi [this message]
2019-10-09  7:37   ` [PATCH v3 04/14] dmaengine: Add metadata_ops for dma_async_tx_descriptor Tero Kristo
2019-10-01  6:16 ` [PATCH v3 05/14] dmaengine: Add support for reporting DMA cached data amount Peter Ujfalusi
2019-10-09  9:17   ` Tero Kristo
2019-10-01  6:16 ` [PATCH v3 06/14] dmaengine: ti: Add cppi5 header for UDMA Peter Ujfalusi
2019-10-09  9:13   ` Tero Kristo
2019-10-01  6:16 ` [PATCH v3 07/14] dt-bindings: dma: ti: Add document for K3 UDMA Peter Ujfalusi
2019-10-10 17:52   ` Rob Herring
2019-10-11  7:30     ` Peter Ujfalusi
2019-10-15 17:30       ` Peter Ujfalusi
2019-10-17 14:03         ` Rob Herring
2019-10-22 11:46           ` Peter Ujfalusi
2019-10-01  6:16 ` [PATCH v3 08/14] dmaengine: ti: New driver for K3 UDMA - split#1: defines, structs, io func Peter Ujfalusi
2019-10-09 13:40   ` Tero Kristo
2019-10-01  6:16 ` [PATCH v3 09/14] dmaengine: ti: New driver for K3 UDMA - split#2: probe/remove, xlate and filter_fn Peter Ujfalusi
2019-10-03  8:35   ` Peter Ujfalusi
2019-10-01  6:17 ` [PATCH v3 10/14] dmaengine: ti: New driver for K3 UDMA - split#3: alloc/free chan_resources Peter Ujfalusi
2019-10-01  6:17 ` [PATCH v3 11/14] dmaengine: ti: New driver for K3 UDMA - split#4: dma_device callbacks 1 Peter Ujfalusi
2019-10-01  6:17 ` [PATCH v3 12/14] dmaengine: ti: New driver for K3 UDMA - split#5: dma_device callbacks 2 Peter Ujfalusi
2019-10-01  6:17 ` [PATCH v3 13/14] dmaengine: ti: New driver for K3 UDMA - split#6: Kconfig and Makefile Peter Ujfalusi
2019-10-01  6:17 ` [PATCH v3 14/14] dmaengine: ti: k3-udma: Add glue layer for non DMAengine users Peter Ujfalusi
2019-10-04 16:35 ` [PATCH v3 00/14] dmaengine/soc: Add Texas Instruments UDMA support santosh.shilimkar
2019-10-08 10:09   ` Peter Ujfalusi
2019-10-09 16:02     ` santosh.shilimkar

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191001061704.2399-5-peter.ujfalusi@ti.com \
    --to=peter.ujfalusi@ti.com \
    --cc=dan.j.williams@intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dmaengine@vger.kernel.org \
    --cc=grygorii.strashko@ti.com \
    --cc=j-keerthy@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lokeshvutla@ti.com \
    --cc=nm@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=ssantosh@kernel.org \
    --cc=t-kristo@ti.com \
    --cc=tony@atomide.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

dmaengine Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/dmaengine/0 dmaengine/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dmaengine dmaengine/ https://lore.kernel.org/dmaengine \
		dmaengine@vger.kernel.org
	public-inbox-index dmaengine

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.dmaengine


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git