[PATCH AUTOSEL 4.19 121/205] dmaengine: dma-jz4780: Don't depend on MACH_JZ4780

[PATCH AUTOSEL 4.19 121/205] dmaengine: dma-jz4780: Don't depend on MACH_JZ4780

[Sasha Levin]

From: Paul Cercueil <paul@crapouillou.net>

[ Upstream commit c558ecd21c852c97ff98dc6c61f715ba420ec251 ]

If we make this driver depend on MACH_JZ4780, that means it can be
enabled only if we're building a kernel specially crafted for a
JZ4780-based board, while most GNU/Linux distributions will want one
generic MIPS kernel that works on multiple boards.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index dacf3f42426de..a4f95574eb9ad 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -143,7 +143,7 @@ config DMA_JZ4740
 
 config DMA_JZ4780
 	tristate "JZ4780 DMA support"
-	depends on MACH_JZ4780 || COMPILE_TEST
+	depends on MIPS || COMPILE_TEST
 	select DMA_ENGINE
 	select DMA_VIRTUAL_CHANNELS
 	help
-- 
2.20.1

[PATCH AUTOSEL 4.19 122/205] dmaengine: dma-jz4780: Further residue status fix

[Sasha Levin]

From: Daniel Silsby <dansilsby@gmail.com>

[ Upstream commit 83ef4fb7556b6a673f755da670cbacab7e2c7f1b ]

Func jz4780_dma_desc_residue() expects the index to the next hw
descriptor as its last parameter. Caller func jz4780_dma_tx_status(),
however, applied modulus before passing it. When the current hw
descriptor was last in the list, the index passed became zero.

The resulting excess of reported residue especially caused problems
with cyclic DMA transfer clients, i.e. ALSA AIC audio output, which
rely on this for determining current DMA location within buffer.

Combined with the recent and related residue-reporting fixes, spurious
ALSA audio underruns on jz4770 hardware are now fixed.

Signed-off-by: Daniel Silsby <dansilsby@gmail.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/dma-jz4780.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/dma-jz4780.c b/drivers/dma/dma-jz4780.c
index 987899610b461..edff93aacad36 100644
--- a/drivers/dma/dma-jz4780.c
+++ b/drivers/dma/dma-jz4780.c
@@ -587,7 +587,7 @@ static enum dma_status jz4780_dma_tx_status(struct dma_chan *chan,
 					to_jz4780_dma_desc(vdesc), 0);
 	} else if (cookie == jzchan->desc->vdesc.tx.cookie) {
 		txstate->residue = jz4780_dma_desc_residue(jzchan, jzchan->desc,
-			  (jzchan->curr_hwdesc + 1) % jzchan->desc->count);
+					jzchan->curr_hwdesc + 1);
 	} else
 		txstate->residue = 0;
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 128/205] dmaengine: at_xdmac: remove a stray bottom half unlock

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 0b515abb6b7eb08e90bdfc01fc8fbdd112c15d81 ]

We switched this code from spin_lock_bh() to vanilla spin_lock() but
there was one stray spin_unlock_bh() that was overlooked.  This
patch converts it to spin_unlock() as well.

Fixes: d8570d018f69 ("dmaengine: at_xdmac: move spin_lock_bh to spin_lock in tasklet")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/at_xdmac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/at_xdmac.c b/drivers/dma/at_xdmac.c
index db5b8fe1dd4ab..7db66f974041e 100644
--- a/drivers/dma/at_xdmac.c
+++ b/drivers/dma/at_xdmac.c
@@ -1608,7 +1608,7 @@ static void at_xdmac_tasklet(unsigned long data)
 		dev_vdbg(chan2dev(&atchan->chan), "%s: desc 0x%p\n", __func__, desc);
 		if (!desc->active_xfer) {
 			dev_err(chan2dev(&atchan->chan), "Xfer not active: exiting");
-			spin_unlock_bh(&atchan->lock);
+			spin_unlock(&atchan->lock);
 			return;
 		}
 
-- 
2.20.1