dmaengine Archive on lore.kernel.org
 help / color / Atom feed
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: <vkoul@kernel.org>
Cc: <dmaengine@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<dan.j.williams@intel.com>, <grygorii.strashko@ti.com>,
	<vigneshr@ti.com>
Subject: [PATCH v2 1/6] dmaengine: ti: k3-udma: Use ktime/usleep_range based TX completion check
Date: Fri, 14 Feb 2020 11:14:36 +0200
Message-ID: <20200214091441.27535-2-peter.ujfalusi@ti.com> (raw)
In-Reply-To: <20200214091441.27535-1-peter.ujfalusi@ti.com>

From: Vignesh Raghavendra <vigneshr@ti.com>

In some cases (McSPI for example) the jiffie and delayed_work based
workaround can cause big throughput drop.

Switch to use ktime/usleep_range based implementation to be able
to sustain speed for PDMA based peripherals.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 drivers/dma/ti/k3-udma.c | 80 ++++++++++++++++++++++++++--------------
 1 file changed, 53 insertions(+), 27 deletions(-)

diff --git a/drivers/dma/ti/k3-udma.c b/drivers/dma/ti/k3-udma.c
index ea79c2df28e0..fb59c869a6a7 100644
--- a/drivers/dma/ti/k3-udma.c
+++ b/drivers/dma/ti/k3-udma.c
@@ -5,6 +5,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/delay.h>
 #include <linux/dmaengine.h>
 #include <linux/dma-mapping.h>
 #include <linux/dmapool.h>
@@ -169,7 +170,7 @@ enum udma_chan_state {
 
 struct udma_tx_drain {
 	struct delayed_work work;
-	unsigned long jiffie;
+	ktime_t tstamp;
 	u32 residue;
 };
 
@@ -946,9 +947,10 @@ static bool udma_is_desc_really_done(struct udma_chan *uc, struct udma_desc *d)
 	peer_bcnt = udma_tchanrt_read(uc->tchan, UDMA_TCHAN_RT_PEER_BCNT_REG);
 	bcnt = udma_tchanrt_read(uc->tchan, UDMA_TCHAN_RT_BCNT_REG);
 
+	/* Transfer is incomplete, store current residue and time stamp */
 	if (peer_bcnt < bcnt) {
 		uc->tx_drain.residue = bcnt - peer_bcnt;
-		uc->tx_drain.jiffie = jiffies;
+		uc->tx_drain.tstamp = ktime_get();
 		return false;
 	}
 
@@ -961,35 +963,59 @@ static void udma_check_tx_completion(struct work_struct *work)
 					    tx_drain.work.work);
 	bool desc_done = true;
 	u32 residue_diff;
-	unsigned long jiffie_diff, delay;
+	ktime_t time_diff;
+	unsigned long delay;
+
+	while (1) {
+		if (uc->desc) {
+			/* Get previous residue and time stamp */
+			residue_diff = uc->tx_drain.residue;
+			time_diff = uc->tx_drain.tstamp;
+			/*
+			 * Get current residue and time stamp or see if
+			 * transfer is complete
+			 */
+			desc_done = udma_is_desc_really_done(uc, uc->desc);
+		}
 
-	if (uc->desc) {
-		residue_diff = uc->tx_drain.residue;
-		jiffie_diff = uc->tx_drain.jiffie;
-		desc_done = udma_is_desc_really_done(uc, uc->desc);
-	}
-
-	if (!desc_done) {
-		jiffie_diff = uc->tx_drain.jiffie - jiffie_diff;
-		residue_diff -= uc->tx_drain.residue;
-		if (residue_diff) {
-			/* Try to guess when we should check next time */
-			residue_diff /= jiffie_diff;
-			delay = uc->tx_drain.residue / residue_diff / 3;
-			if (jiffies_to_msecs(delay) < 5)
-				delay = 0;
-		} else {
-			/* No progress, check again in 1 second  */
-			delay = HZ;
+		if (!desc_done) {
+			/*
+			 * Find the time delta and residue delta w.r.t
+			 * previous poll
+			 */
+			time_diff = ktime_sub(uc->tx_drain.tstamp,
+					      time_diff) + 1;
+			residue_diff -= uc->tx_drain.residue;
+			if (residue_diff) {
+				/*
+				 * Try to guess when we should check
+				 * next time by calculating rate at
+				 * which data is being drained at the
+				 * peer device
+				 */
+				delay = (time_diff / residue_diff) *
+					uc->tx_drain.residue;
+			} else {
+				/* No progress, check again in 1 second  */
+				schedule_delayed_work(&uc->tx_drain.work, HZ);
+				break;
+			}
+
+			usleep_range(ktime_to_us(delay),
+				     ktime_to_us(delay) + 10);
+			continue;
 		}
 
-		schedule_delayed_work(&uc->tx_drain.work, delay);
-	} else if (uc->desc) {
-		struct udma_desc *d = uc->desc;
+		if (uc->desc) {
+			struct udma_desc *d = uc->desc;
+
+			uc->bcnt += d->residue;
+			udma_start(uc);
+			vchan_cookie_complete(&d->vd);
+			break;
+		}
 
-		uc->bcnt += d->residue;
-		udma_start(uc);
-		vchan_cookie_complete(&d->vd);
+		break;
 	}
 }
 
-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki


  reply index

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-14  9:14 [PATCH v2 0/6] dmaengine: ti: k3-udma: Fixes for 5.6 Peter Ujfalusi
2020-02-14  9:14 ` Peter Ujfalusi [this message]
2020-02-14  9:14 ` [PATCH v2 2/6] dmaengine: ti: k3-udma: Workaround for RX teardown with stale data in peer Peter Ujfalusi
2020-02-14  9:14 ` [PATCH v2 3/6] dmaengine: ti: k3-udma: Move the TR counter calculation to helper function Peter Ujfalusi
2020-02-14  9:14 ` [PATCH v2 4/6] dmaengine: ti: k3-udma: Use the TR counter helper for slave_sg and cyclic Peter Ujfalusi
2020-02-14  9:14 ` [PATCH v2 5/6] dmaengine: ti: k3-udma: Use the channel direction in pause/resume functions Peter Ujfalusi
2020-02-14  9:14 ` [PATCH v2 6/6] dmaengine: ti: k3-udma: Fix terminated transfer handling Peter Ujfalusi

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200214091441.27535-2-peter.ujfalusi@ti.com \
    --to=peter.ujfalusi@ti.com \
    --cc=dan.j.williams@intel.com \
    --cc=dmaengine@vger.kernel.org \
    --cc=grygorii.strashko@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=vigneshr@ti.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

dmaengine Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/dmaengine/0 dmaengine/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dmaengine dmaengine/ https://lore.kernel.org/dmaengine \
		dmaengine@vger.kernel.org
	public-inbox-index dmaengine

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.dmaengine


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git