[PATCH AUTOSEL 5.5 014/542] dmaengine: ti: edma: add missed operations

[PATCH AUTOSEL 5.5 014/542] dmaengine: ti: edma: add missed operations

[Sasha Levin]

From: Chuhong Yuan <hslester96@gmail.com>

[ Upstream commit 2a03c1314506557277829562dd2ec5c11a6ea914 ]

The driver forgets to call pm_runtime_disable and pm_runtime_put_sync in
probe failure and remove.
Add the calls and modify probe failure handling to fix it.

To simplify the fix, the patch adjusts the calling order and merges checks
for devm_kcalloc.

Fixes: 2b6b3b742019 ("ARM/dmaengine: edma: Merge the two drivers under drivers/dma/")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20191124052855.6472-1-hslester96@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/ti/edma.c | 37 ++++++++++++++++++++-----------------
 1 file changed, 20 insertions(+), 17 deletions(-)

diff --git a/drivers/dma/ti/edma.c b/drivers/dma/ti/edma.c
index 756a3c951dc72..0628ee4bf1b41 100644
--- a/drivers/dma/ti/edma.c
+++ b/drivers/dma/ti/edma.c
@@ -2289,13 +2289,6 @@ static int edma_probe(struct platform_device *pdev)
 	if (!info)
 		return -ENODEV;
 
-	pm_runtime_enable(dev);
-	ret = pm_runtime_get_sync(dev);
-	if (ret < 0) {
-		dev_err(dev, "pm_runtime_get_sync() failed\n");
-		return ret;
-	}
-
 	ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
 	if (ret)
 		return ret;
@@ -2326,27 +2319,31 @@ static int edma_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, ecc);
 
+	pm_runtime_enable(dev);
+	ret = pm_runtime_get_sync(dev);
+	if (ret < 0) {
+		dev_err(dev, "pm_runtime_get_sync() failed\n");
+		pm_runtime_disable(dev);
+		return ret;
+	}
+
 	/* Get eDMA3 configuration from IP */
 	ret = edma_setup_from_hw(dev, info, ecc);
 	if (ret)
-		return ret;
+		goto err_disable_pm;
 
 	/* Allocate memory based on the information we got from the IP */
 	ecc->slave_chans = devm_kcalloc(dev, ecc->num_channels,
 					sizeof(*ecc->slave_chans), GFP_KERNEL);
-	if (!ecc->slave_chans)
-		return -ENOMEM;
 
 	ecc->slot_inuse = devm_kcalloc(dev, BITS_TO_LONGS(ecc->num_slots),
 				       sizeof(unsigned long), GFP_KERNEL);
-	if (!ecc->slot_inuse)
-		return -ENOMEM;
 
 	ecc->channels_mask = devm_kcalloc(dev,
 					   BITS_TO_LONGS(ecc->num_channels),
 					   sizeof(unsigned long), GFP_KERNEL);
-	if (!ecc->channels_mask)
-		return -ENOMEM;
+	if (!ecc->slave_chans || !ecc->slot_inuse || !ecc->channels_mask)
+		goto err_disable_pm;
 
 	/* Mark all channels available initially */
 	bitmap_fill(ecc->channels_mask, ecc->num_channels);
@@ -2388,7 +2385,7 @@ static int edma_probe(struct platform_device *pdev)
 				       ecc);
 		if (ret) {
 			dev_err(dev, "CCINT (%d) failed --> %d\n", irq, ret);
-			return ret;
+			goto err_disable_pm;
 		}
 		ecc->ccint = irq;
 	}
@@ -2404,7 +2401,7 @@ static int edma_probe(struct platform_device *pdev)
 				       ecc);
 		if (ret) {
 			dev_err(dev, "CCERRINT (%d) failed --> %d\n", irq, ret);
-			return ret;
+			goto err_disable_pm;
 		}
 		ecc->ccerrint = irq;
 	}
@@ -2412,7 +2409,8 @@ static int edma_probe(struct platform_device *pdev)
 	ecc->dummy_slot = edma_alloc_slot(ecc, EDMA_SLOT_ANY);
 	if (ecc->dummy_slot < 0) {
 		dev_err(dev, "Can't allocate PaRAM dummy slot\n");
-		return ecc->dummy_slot;
+		ret = ecc->dummy_slot;
+		goto err_disable_pm;
 	}
 
 	queue_priority_mapping = info->queue_priority_mapping;
@@ -2512,6 +2510,9 @@ static int edma_probe(struct platform_device *pdev)
 
 err_reg1:
 	edma_free_slot(ecc, ecc->dummy_slot);
+err_disable_pm:
+	pm_runtime_put_sync(dev);
+	pm_runtime_disable(dev);
 	return ret;
 }
 
@@ -2542,6 +2543,8 @@ static int edma_remove(struct platform_device *pdev)
 	if (ecc->dma_memcpy)
 		dma_async_device_unregister(ecc->dma_memcpy);
 	edma_free_slot(ecc, ecc->dummy_slot);
+	pm_runtime_put_sync(dev);
+	pm_runtime_disable(dev);
 
 	return 0;
 }
-- 
2.20.1

[PATCH AUTOSEL 5.5 025/542] dmaengine: ti: edma: Fix error return code in edma_probe()

[Sasha Levin]

From: Wei Yongjun <weiyongjun1@huawei.com>

[ Upstream commit d1fd03a35efc6285e43f4ef35ef04dbf2c9389c6 ]

Fix to return negative error code -ENOMEM from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 2a03c1314506 ("dmaengine: ti: edma: add missed operations")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20191212114622.127322-1-weiyongjun1@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/ti/edma.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/ti/edma.c b/drivers/dma/ti/edma.c
index 0628ee4bf1b41..03a7f647f7b2c 100644
--- a/drivers/dma/ti/edma.c
+++ b/drivers/dma/ti/edma.c
@@ -2342,8 +2342,10 @@ static int edma_probe(struct platform_device *pdev)
 	ecc->channels_mask = devm_kcalloc(dev,
 					   BITS_TO_LONGS(ecc->num_channels),
 					   sizeof(unsigned long), GFP_KERNEL);
-	if (!ecc->slave_chans || !ecc->slot_inuse || !ecc->channels_mask)
+	if (!ecc->slave_chans || !ecc->slot_inuse || !ecc->channels_mask) {
+		ret = -ENOMEM;
 		goto err_disable_pm;
+	}
 
 	/* Mark all channels available initially */
 	bitmap_fill(ecc->channels_mask, ecc->num_channels);
-- 
2.20.1

[PATCH AUTOSEL 5.5 090/542] dmaengine: fsl-qdma: fix duplicated argument to &&

[Sasha Levin]

From: Chen Zhou <chenzhou10@huawei.com>

[ Upstream commit 4b048178854da11656596d36a107577d66fd1e08 ]

There is duplicated argument to && in function fsl_qdma_free_chan_resources,
which looks like a typo, pointer fsl_queue->desc_pool also needs NULL check,
fix it.
Detected with coccinelle.

Fixes: b092529e0aa0 ("dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs")
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Reviewed-by: Peng Ma <peng.ma@nxp.com>
Tested-by: Peng Ma <peng.ma@nxp.com>
Link: https://lore.kernel.org/r/20200120125843.34398-1-chenzhou10@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/fsl-qdma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/fsl-qdma.c b/drivers/dma/fsl-qdma.c
index 89792083d62c5..95cc0256b3878 100644
--- a/drivers/dma/fsl-qdma.c
+++ b/drivers/dma/fsl-qdma.c
@@ -304,7 +304,7 @@ static void fsl_qdma_free_chan_resources(struct dma_chan *chan)
 
 	vchan_dma_desc_free_list(&fsl_chan->vchan, &head);
 
-	if (!fsl_queue->comp_pool && !fsl_queue->comp_pool)
+	if (!fsl_queue->comp_pool && !fsl_queue->desc_pool)
 		return;
 
 	list_for_each_entry_safe(comp_temp, _comp_temp,
-- 
2.20.1

[PATCH AUTOSEL 5.5 195/542] dmaengine: axi-dmac: add a check for devm_regmap_init_mmio

[Sasha Levin]

From: Chuhong Yuan <hslester96@gmail.com>

[ Upstream commit a5b982af953bcc838cd198b0434834cc1dff14ec ]

The driver misses checking the result of devm_regmap_init_mmio().
Add a check to fix it.

Fixes: fc15be39a827 ("dmaengine: axi-dmac: add regmap support")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20191209085711.16001-1-hslester96@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/dma-axi-dmac.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/dma-axi-dmac.c b/drivers/dma/dma-axi-dmac.c
index a0ee404b736ed..f1d149e328395 100644
--- a/drivers/dma/dma-axi-dmac.c
+++ b/drivers/dma/dma-axi-dmac.c
@@ -830,6 +830,7 @@ static int axi_dmac_probe(struct platform_device *pdev)
 	struct dma_device *dma_dev;
 	struct axi_dmac *dmac;
 	struct resource *res;
+	struct regmap *regmap;
 	int ret;
 
 	dmac = devm_kzalloc(&pdev->dev, sizeof(*dmac), GFP_KERNEL);
@@ -921,10 +922,17 @@ static int axi_dmac_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, dmac);
 
-	devm_regmap_init_mmio(&pdev->dev, dmac->base, &axi_dmac_regmap_config);
+	regmap = devm_regmap_init_mmio(&pdev->dev, dmac->base,
+		 &axi_dmac_regmap_config);
+	if (IS_ERR(regmap)) {
+		ret = PTR_ERR(regmap);
+		goto err_free_irq;
+	}
 
 	return 0;
 
+err_free_irq:
+	free_irq(dmac->irq, dmac);
 err_unregister_of:
 	of_dma_controller_free(pdev->dev.of_node);
 err_unregister_device:
-- 
2.20.1

[PATCH AUTOSEL 5.5 259/542] dmaengine: Store module owner in dma_device struct

[Sasha Levin]

From: Logan Gunthorpe <logang@deltatee.com>

[ Upstream commit dae7a589c18a4d979d5f14b09374e871b995ceb1 ]

dma_chan_to_owner() dereferences the driver from the struct device to
obtain the owner and call module_[get|put](). However, if the backing
device is unbound before the dma_device is unregistered, the driver
will be cleared and this will cause a NULL pointer dereference.

Instead, store a pointer to the owner module in the dma_device struct
so the module reference can be properly put when the channel is put, even
if the backing device was destroyed first.

This change helps to support a safer unbind of DMA engines.
If the dma_device is unregistered in the driver's remove function,
there's no guarantee that there are no existing clients and a users
action may trigger the WARN_ONCE in dma_async_device_unregister()
which is unlikely to leave the system in a consistent state.
Instead, a better approach is to allow the backing driver to go away
and fail any subsequent requests to it.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Link: https://lore.kernel.org/r/20191216190120.21374-2-logang@deltatee.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/dmaengine.c   | 4 +++-
 include/linux/dmaengine.h | 2 ++
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
index 03ac4b96117cd..4b604086b1b3a 100644
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -179,7 +179,7 @@ __dma_device_satisfies_mask(struct dma_device *device,
 
 static struct module *dma_chan_to_owner(struct dma_chan *chan)
 {
-	return chan->device->dev->driver->owner;
+	return chan->device->owner;
 }
 
 /**
@@ -919,6 +919,8 @@ int dma_async_device_register(struct dma_device *device)
 		return -EIO;
 	}
 
+	device->owner = device->dev->driver->owner;
+
 	if (dma_has_cap(DMA_MEMCPY, device->cap_mask) && !device->device_prep_dma_memcpy) {
 		dev_err(device->dev,
 			"Device claims capability %s, but op is not defined\n",
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index dad4a68fa0094..8013562751a50 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -674,6 +674,7 @@ struct dma_filter {
  * @fill_align: alignment shift for memset operations
  * @dev_id: unique device ID
  * @dev: struct device reference for dma mapping api
+ * @owner: owner module (automatically set based on the provided dev)
  * @src_addr_widths: bit mask of src addr widths the device supports
  *	Width is specified in bytes, e.g. for a device supporting
  *	a width of 4 the mask should have BIT(4) set.
@@ -737,6 +738,7 @@ struct dma_device {
 
 	int dev_id;
 	struct device *dev;
+	struct module *owner;
 
 	u32 src_addr_widths;
 	u32 dst_addr_widths;
-- 
2.20.1

[PATCH AUTOSEL 5.5 262/542] dmaengine: imx-sdma: Fix memory leak

[Sasha Levin]

From: Sascha Hauer <s.hauer@pengutronix.de>

[ Upstream commit 02939cd167095f16328a1bd5cab5a90b550606df ]

The current descriptor is not on any list of the virtual DMA channel.
Once sdma_terminate_all() is called when a descriptor is currently
in flight then this one is forgotten to be freed. We have to call
vchan_terminate_vdesc() on this descriptor to re-add it to the lists.
Now that we also free the currently running descriptor we can (and
actually have to) remove the current descriptor from its list also
for the cyclic case.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Robin Gong <yibin.gong@nxp.com>
Tested-by: Robin Gong <yibin.gong@nxp.com>
Link: https://lore.kernel.org/r/20191216105328.15198-10-s.hauer@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/imx-sdma.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index c27e206a764c3..66f1b2ac5cde4 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -760,12 +760,8 @@ static void sdma_start_desc(struct sdma_channel *sdmac)
 		return;
 	}
 	sdmac->desc = desc = to_sdma_desc(&vd->tx);
-	/*
-	 * Do not delete the node in desc_issued list in cyclic mode, otherwise
-	 * the desc allocated will never be freed in vchan_dma_desc_free_list
-	 */
-	if (!(sdmac->flags & IMX_DMA_SG_LOOP))
-		list_del(&vd->node);
+
+	list_del(&vd->node);
 
 	sdma->channel_control[channel].base_bd_ptr = desc->bd_phys;
 	sdma->channel_control[channel].current_bd_ptr = desc->bd_phys;
@@ -1071,7 +1067,6 @@ static void sdma_channel_terminate_work(struct work_struct *work)
 
 	spin_lock_irqsave(&sdmac->vc.lock, flags);
 	vchan_get_all_descriptors(&sdmac->vc, &head);
-	sdmac->desc = NULL;
 	spin_unlock_irqrestore(&sdmac->vc.lock, flags);
 	vchan_dma_desc_free_list(&sdmac->vc, &head);
 	sdmac->context_loaded = false;
@@ -1080,11 +1075,19 @@ static void sdma_channel_terminate_work(struct work_struct *work)
 static int sdma_disable_channel_async(struct dma_chan *chan)
 {
 	struct sdma_channel *sdmac = to_sdma_chan(chan);
+	unsigned long flags;
+
+	spin_lock_irqsave(&sdmac->vc.lock, flags);
 
 	sdma_disable_channel(chan);
 
-	if (sdmac->desc)
+	if (sdmac->desc) {
+		vchan_terminate_vdesc(&sdmac->desc->vd);
+		sdmac->desc = NULL;
 		schedule_work(&sdmac->terminate_worker);
+	}
+
+	spin_unlock_irqrestore(&sdmac->vc.lock, flags);
 
 	return 0;
 }
-- 
2.20.1