From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: <vkoul@kernel.org>
Cc: <dmaengine@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<dan.j.williams@intel.com>, <geert@linux-m68k.org>
Subject: [PATCH v5 2/3] dmaengine: ti: k3-udma: Implement custom dbg_summary_show for debugfs
Date: Fri, 6 Mar 2020 16:28:38 +0200 [thread overview]
Message-ID: <20200306142839.17910-3-peter.ujfalusi@ti.com> (raw)
In-Reply-To: <20200306142839.17910-1-peter.ujfalusi@ti.com>
With the custom dbg_summary_show the driver can show useful information
about the used channels.
dma0 (285c0000.dma-controller): number of channels: 24
dma1 (31150000.dma-controller): number of channels: 84
dma1chan0 | 2b00000.mcasp:tx (MEM_TO_DEV, tchan16 [0x1010 -> 0xc400], PDMA[ ACC32 BURST ], TR mode)
dma1chan1 | 2b00000.mcasp:rx (DEV_TO_MEM, rchan16 [0x4400 -> 0x9010], PDMA[ ACC32 BURST ], TR mode)
dma1chan2 | 2ba0000.mcasp:tx (MEM_TO_DEV, tchan17 [0x1011 -> 0xc507], PDMA[ ACC32 BURST ], TR mode)
dma1chan3 | 2ba0000.mcasp:rx (DEV_TO_MEM, rchan17 [0x4507 -> 0x9011], PDMA[ ACC32 BURST ], TR mode)
dma1chan4 | in-use (MEM_TO_MEM, chan0 pair [0x1000 -> 0x9000], PSI-L Native, TR mode)
dma1chan5 | in-use (MEM_TO_MEM, chan1 pair [0x1001 -> 0x9001], PSI-L Native, TR mode)
dma1chan6 | in-use (MEM_TO_MEM, chan4 pair [0x1004 -> 0x9004], PSI-L Native, TR mode)
dma1chan7 | in-use (MEM_TO_MEM, chan5 pair [0x1005 -> 0x9005], PSI-L Native, TR mode)
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
drivers/dma/ti/k3-udma.c | 63 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 63 insertions(+)
diff --git a/drivers/dma/ti/k3-udma.c b/drivers/dma/ti/k3-udma.c
index 5e076e5680f4..a9c0251adf1a 100644
--- a/drivers/dma/ti/k3-udma.c
+++ b/drivers/dma/ti/k3-udma.c
@@ -3501,6 +3501,66 @@ static int udma_setup_rx_flush(struct udma_dev *ud)
return 0;
}
+#ifdef CONFIG_DEBUG_FS
+static void udma_dbg_summary_show_chan(struct seq_file *s,
+ struct dma_chan *chan)
+{
+ struct udma_chan *uc = to_udma_chan(chan);
+ struct udma_chan_config *ucc = &uc->config;
+
+ seq_printf(s, " %-13s| %s", dma_chan_name(chan),
+ chan->dbg_client_name ?: "in-use");
+ seq_printf(s, " (%s, ", dmaengine_get_direction_text(uc->config.dir));
+
+ switch (uc->config.dir) {
+ case DMA_MEM_TO_MEM:
+ seq_printf(s, "chan%d pair [0x%04x -> 0x%04x], ", uc->tchan->id,
+ ucc->src_thread, ucc->dst_thread);
+ break;
+ case DMA_DEV_TO_MEM:
+ seq_printf(s, "rchan%d [0x%04x -> 0x%04x], ", uc->rchan->id,
+ ucc->src_thread, ucc->dst_thread);
+ break;
+ case DMA_MEM_TO_DEV:
+ seq_printf(s, "tchan%d [0x%04x -> 0x%04x], ", uc->tchan->id,
+ ucc->src_thread, ucc->dst_thread);
+ break;
+ default:
+ seq_printf(s, ")\n");
+ return;
+ }
+
+ if (ucc->ep_type == PSIL_EP_NATIVE) {
+ seq_printf(s, "PSI-L Native");
+ if (ucc->metadata_size) {
+ seq_printf(s, "[%s", ucc->needs_epib ? " EPIB" : "");
+ if (ucc->psd_size)
+ seq_printf(s, " PSDsize:%u", ucc->psd_size);
+ seq_printf(s, " ]");
+ }
+ } else {
+ seq_printf(s, "PDMA");
+ if (ucc->enable_acc32 || ucc->enable_burst)
+ seq_printf(s, "[%s%s ]",
+ ucc->enable_acc32 ? " ACC32" : "",
+ ucc->enable_burst ? " BURST" : "");
+ }
+
+ seq_printf(s, ", %s)\n", ucc->pkt_mode ? "Packet mode" : "TR mode");
+}
+
+static void udma_dbg_summary_show(struct seq_file *s,
+ struct dma_device *dma_dev)
+{
+ struct dma_chan *chan;
+
+ list_for_each_entry(chan, &dma_dev->channels, device_node) {
+ if (chan->client_count)
+ udma_dbg_summary_show_chan(s, chan);
+ }
+}
+#endif /* CONFIG_DEBUG_FS */
+
#define TI_UDMAC_BUSWIDTHS (BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \
BIT(DMA_SLAVE_BUSWIDTH_3_BYTES) | \
@@ -3587,6 +3647,9 @@ static int udma_probe(struct platform_device *pdev)
ud->ddev.device_resume = udma_resume;
ud->ddev.device_terminate_all = udma_terminate_all;
ud->ddev.device_synchronize = udma_synchronize;
+#ifdef CONFIG_DEBUG_FS
+ ud->ddev.dbg_summary_show = udma_dbg_summary_show;
+#endif
ud->ddev.device_free_chan_resources = udma_free_chan_resources;
ud->ddev.src_addr_widths = TI_UDMAC_BUSWIDTHS;
--
Peter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
next prev parent reply other threads:[~2020-03-06 14:28 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-06 14:28 [PATCH v5 0/3] dmaengine: Initial debugfs support Peter Ujfalusi
2020-03-06 14:28 ` [PATCH v5 1/3] dmaengine: Add basic " Peter Ujfalusi
2020-03-06 14:28 ` Peter Ujfalusi [this message]
2020-03-06 14:28 ` [PATCH v5 3/3] dmaengine: Create debug directories for DMA devices Peter Ujfalusi
2020-03-11 9:26 ` [PATCH v5 0/3] dmaengine: Initial debugfs support Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200306142839.17910-3-peter.ujfalusi@ti.com \
--to=peter.ujfalusi@ti.com \
--cc=dan.j.williams@intel.com \
--cc=dmaengine@vger.kernel.org \
--cc=geert@linux-m68k.org \
--cc=linux-kernel@vger.kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).