dmaengine Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v1] dmaengine: pch_dma: use generic power management
@ 2020-07-20 11:37 Vaibhav Gupta
  2020-07-27  8:56 ` Vinod Koul
  0 siblings, 1 reply; 5+ messages in thread
From: Vaibhav Gupta @ 2020-07-20 11:37 UTC (permalink / raw)
  To: Bjorn Helgaas, Bjorn Helgaas, Bjorn Helgaas, Vaibhav Gupta,
	Dan Williams, Vinod Koul
  Cc: Vaibhav Gupta, Shuah Khan, linux-kernel, linux-kernel-mentees, dmaengine

Drivers using legacy PM have to manage PCI states and device's PM states
themselves. They also need to take care of configuration registers.

With improved and powerful support of generic PM, PCI Core takes care of
above mentioned, device-independent, jobs.

This driver makes use of PCI helper functions like
pci_save/restore_state(), pci_enable/disable_device(),
and pci_set_power_state() to do required operations. In generic mode, they
are no longer needed.

Change function parameter in both .suspend() and .resume() to
"struct device*" type. Use dev_get_drvdata() to get drv data.

Compile-tested only.

Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
---
 drivers/dma/pch_dma.c | 35 +++++++++--------------------------
 1 file changed, 9 insertions(+), 26 deletions(-)

diff --git a/drivers/dma/pch_dma.c b/drivers/dma/pch_dma.c
index a3b0b4c56a19..e93005837e3f 100644
--- a/drivers/dma/pch_dma.c
+++ b/drivers/dma/pch_dma.c
@@ -735,8 +735,7 @@ static irqreturn_t pd_irq(int irq, void *devid)
 	return ret0 | ret2;
 }
 
-#ifdef	CONFIG_PM
-static void pch_dma_save_regs(struct pch_dma *pd)
+static void __maybe_unused pch_dma_save_regs(struct pch_dma *pd)
 {
 	struct pch_dma_chan *pd_chan;
 	struct dma_chan *chan, *_c;
@@ -759,7 +758,7 @@ static void pch_dma_save_regs(struct pch_dma *pd)
 	}
 }
 
-static void pch_dma_restore_regs(struct pch_dma *pd)
+static void __maybe_unused pch_dma_restore_regs(struct pch_dma *pd)
 {
 	struct pch_dma_chan *pd_chan;
 	struct dma_chan *chan, *_c;
@@ -782,40 +781,25 @@ static void pch_dma_restore_regs(struct pch_dma *pd)
 	}
 }
 
-static int pch_dma_suspend(struct pci_dev *pdev, pm_message_t state)
+static int __maybe_unused pch_dma_suspend(struct device *dev)
 {
-	struct pch_dma *pd = pci_get_drvdata(pdev);
+	struct pch_dma *pd = dev_get_drvdata(dev);
 
 	if (pd)
 		pch_dma_save_regs(pd);
 
-	pci_save_state(pdev);
-	pci_disable_device(pdev);
-	pci_set_power_state(pdev, pci_choose_state(pdev, state));
-
 	return 0;
 }
 
-static int pch_dma_resume(struct pci_dev *pdev)
+static int __maybe_unused pch_dma_resume(struct device *dev)
 {
-	struct pch_dma *pd = pci_get_drvdata(pdev);
-	int err;
-
-	pci_set_power_state(pdev, PCI_D0);
-	pci_restore_state(pdev);
-
-	err = pci_enable_device(pdev);
-	if (err) {
-		dev_dbg(&pdev->dev, "failed to enable device\n");
-		return err;
-	}
+	struct pch_dma *pd = dev_get_drvdata(dev);
 
 	if (pd)
 		pch_dma_restore_regs(pd);
 
 	return 0;
 }
-#endif
 
 static int pch_dma_probe(struct pci_dev *pdev,
 				   const struct pci_device_id *id)
@@ -993,15 +977,14 @@ static const struct pci_device_id pch_dma_id_table[] = {
 	{ 0, },
 };
 
+static SIMPLE_DEV_PM_OPS(pch_dma_pm_ops, pch_dma_suspend, pch_dma_resume);
+
 static struct pci_driver pch_dma_driver = {
 	.name		= DRV_NAME,
 	.id_table	= pch_dma_id_table,
 	.probe		= pch_dma_probe,
 	.remove		= pch_dma_remove,
-#ifdef CONFIG_PM
-	.suspend	= pch_dma_suspend,
-	.resume		= pch_dma_resume,
-#endif
+	.driver.pm	= &pch_dma_pm_ops,
 };
 
 module_pci_driver(pch_dma_driver);
-- 
2.27.0


^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH v1] dmaengine: pch_dma: use generic power management
  2020-07-20 11:37 [PATCH v1] dmaengine: pch_dma: use generic power management Vaibhav Gupta
@ 2020-07-27  8:56 ` Vinod Koul
  2020-07-27 10:25   ` Vaibhav Gupta
  2020-07-27 11:19   ` Andy Shevchenko
  0 siblings, 2 replies; 5+ messages in thread
From: Vinod Koul @ 2020-07-27  8:56 UTC (permalink / raw)
  To: Vaibhav Gupta
  Cc: Bjorn Helgaas, Bjorn Helgaas, Bjorn Helgaas, Vaibhav Gupta,
	Dan Williams, Shuah Khan, linux-kernel, linux-kernel-mentees,
	dmaengine

Hi Vaibhav,

On 20-07-20, 17:07, Vaibhav Gupta wrote:
> Drivers using legacy PM have to manage PCI states and device's PM states
> themselves. They also need to take care of configuration registers.
> 
> With improved and powerful support of generic PM, PCI Core takes care of
> above mentioned, device-independent, jobs.
> 
> This driver makes use of PCI helper functions like
> pci_save/restore_state(), pci_enable/disable_device(),
> and pci_set_power_state() to do required operations. In generic mode, they
> are no longer needed.
> 
> Change function parameter in both .suspend() and .resume() to
> "struct device*" type. Use dev_get_drvdata() to get drv data.

You are doing too many things in One patch. Do consider splitting them
up to a change per patch. for example using __maybe could be one patch,
removing code is suspend-resume callbacks would be other one.
> 
> Compile-tested only.

I would like to see some testing before we merge this

> 
> Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
> ---
>  drivers/dma/pch_dma.c | 35 +++++++++--------------------------
>  1 file changed, 9 insertions(+), 26 deletions(-)
> 
> diff --git a/drivers/dma/pch_dma.c b/drivers/dma/pch_dma.c
> index a3b0b4c56a19..e93005837e3f 100644
> --- a/drivers/dma/pch_dma.c
> +++ b/drivers/dma/pch_dma.c
> @@ -735,8 +735,7 @@ static irqreturn_t pd_irq(int irq, void *devid)
>  	return ret0 | ret2;
>  }
>  
> -#ifdef	CONFIG_PM
> -static void pch_dma_save_regs(struct pch_dma *pd)
> +static void __maybe_unused pch_dma_save_regs(struct pch_dma *pd)
>  {
>  	struct pch_dma_chan *pd_chan;
>  	struct dma_chan *chan, *_c;
> @@ -759,7 +758,7 @@ static void pch_dma_save_regs(struct pch_dma *pd)
>  	}
>  }
>  
> -static void pch_dma_restore_regs(struct pch_dma *pd)
> +static void __maybe_unused pch_dma_restore_regs(struct pch_dma *pd)
>  {
>  	struct pch_dma_chan *pd_chan;
>  	struct dma_chan *chan, *_c;
> @@ -782,40 +781,25 @@ static void pch_dma_restore_regs(struct pch_dma *pd)
>  	}
>  }
>  
> -static int pch_dma_suspend(struct pci_dev *pdev, pm_message_t state)
> +static int __maybe_unused pch_dma_suspend(struct device *dev)
>  {
> -	struct pch_dma *pd = pci_get_drvdata(pdev);
> +	struct pch_dma *pd = dev_get_drvdata(dev);
>  
>  	if (pd)
>  		pch_dma_save_regs(pd);
>  
> -	pci_save_state(pdev);
> -	pci_disable_device(pdev);
> -	pci_set_power_state(pdev, pci_choose_state(pdev, state));
> -
>  	return 0;
>  }
>  
> -static int pch_dma_resume(struct pci_dev *pdev)
> +static int __maybe_unused pch_dma_resume(struct device *dev)
>  {
> -	struct pch_dma *pd = pci_get_drvdata(pdev);
> -	int err;
> -
> -	pci_set_power_state(pdev, PCI_D0);
> -	pci_restore_state(pdev);
> -
> -	err = pci_enable_device(pdev);
> -	if (err) {
> -		dev_dbg(&pdev->dev, "failed to enable device\n");
> -		return err;
> -	}
> +	struct pch_dma *pd = dev_get_drvdata(dev);
>  
>  	if (pd)
>  		pch_dma_restore_regs(pd);
>  
>  	return 0;
>  }
> -#endif
>  
>  static int pch_dma_probe(struct pci_dev *pdev,
>  				   const struct pci_device_id *id)
> @@ -993,15 +977,14 @@ static const struct pci_device_id pch_dma_id_table[] = {
>  	{ 0, },
>  };
>  
> +static SIMPLE_DEV_PM_OPS(pch_dma_pm_ops, pch_dma_suspend, pch_dma_resume);
> +
>  static struct pci_driver pch_dma_driver = {
>  	.name		= DRV_NAME,
>  	.id_table	= pch_dma_id_table,
>  	.probe		= pch_dma_probe,
>  	.remove		= pch_dma_remove,
> -#ifdef CONFIG_PM
> -	.suspend	= pch_dma_suspend,
> -	.resume		= pch_dma_resume,
> -#endif
> +	.driver.pm	= &pch_dma_pm_ops,
>  };
>  
>  module_pci_driver(pch_dma_driver);
> -- 
> 2.27.0

-- 
~Vinod

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH v1] dmaengine: pch_dma: use generic power management
  2020-07-27  8:56 ` Vinod Koul
@ 2020-07-27 10:25   ` Vaibhav Gupta
  2020-07-27 11:19   ` Andy Shevchenko
  1 sibling, 0 replies; 5+ messages in thread
From: Vaibhav Gupta @ 2020-07-27 10:25 UTC (permalink / raw)
  To: Vinod Koul
  Cc: Bjorn Helgaas, Bjorn Helgaas, Bjorn Helgaas, Vaibhav Gupta,
	Dan Williams, Shuah Khan, linux-kernel, linux-kernel-mentees,
	dmaengine

On Mon, Jul 27, 2020 at 02:26:21PM +0530, Vinod Koul wrote:
> Hi Vaibhav,
> 
> On 20-07-20, 17:07, Vaibhav Gupta wrote:
> > Drivers using legacy PM have to manage PCI states and device's PM states
> > themselves. They also need to take care of configuration registers.
> > 
> > With improved and powerful support of generic PM, PCI Core takes care of
> > above mentioned, device-independent, jobs.
> > 
> > This driver makes use of PCI helper functions like
> > pci_save/restore_state(), pci_enable/disable_device(),
> > and pci_set_power_state() to do required operations. In generic mode, they
> > are no longer needed.
> > 
> > Change function parameter in both .suspend() and .resume() to
> > "struct device*" type. Use dev_get_drvdata() to get drv data.
> 
> You are doing too many things in One patch. Do consider splitting them
> up to a change per patch. for example using __maybe could be one patch,
> removing code is suspend-resume callbacks would be other one.
>
Sure. But I guess just marking of "__maybe_unused" is not some significant
change. All the legacy PCI drivers have .suspend() and .resume() inside
"#ifdef CONFIG_PM" container.
It is only when I am upgrading them one by one to generic, I remove the
container and mark them with the attribute. So it is like a part of complete
generic upgrade.

Thanks
Vaibhav Gupta
> > Compile-tested only.
> 
> I would like to see some testing before we merge this
> 
> > 
> > Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
> > ---
> >  drivers/dma/pch_dma.c | 35 +++++++++--------------------------
> >  1 file changed, 9 insertions(+), 26 deletions(-)
> > 
> > diff --git a/drivers/dma/pch_dma.c b/drivers/dma/pch_dma.c
> > index a3b0b4c56a19..e93005837e3f 100644
> > --- a/drivers/dma/pch_dma.c
> > +++ b/drivers/dma/pch_dma.c
> > @@ -735,8 +735,7 @@ static irqreturn_t pd_irq(int irq, void *devid)
> >  	return ret0 | ret2;
> >  }
> >  
> > -#ifdef	CONFIG_PM
> > -static void pch_dma_save_regs(struct pch_dma *pd)
> > +static void __maybe_unused pch_dma_save_regs(struct pch_dma *pd)
> >  {
> >  	struct pch_dma_chan *pd_chan;
> >  	struct dma_chan *chan, *_c;
> > @@ -759,7 +758,7 @@ static void pch_dma_save_regs(struct pch_dma *pd)
> >  	}
> >  }
> >  
> > -static void pch_dma_restore_regs(struct pch_dma *pd)
> > +static void __maybe_unused pch_dma_restore_regs(struct pch_dma *pd)
> >  {
> >  	struct pch_dma_chan *pd_chan;
> >  	struct dma_chan *chan, *_c;
> > @@ -782,40 +781,25 @@ static void pch_dma_restore_regs(struct pch_dma *pd)
> >  	}
> >  }
> >  
> > -static int pch_dma_suspend(struct pci_dev *pdev, pm_message_t state)
> > +static int __maybe_unused pch_dma_suspend(struct device *dev)
> >  {
> > -	struct pch_dma *pd = pci_get_drvdata(pdev);
> > +	struct pch_dma *pd = dev_get_drvdata(dev);
> >  
> >  	if (pd)
> >  		pch_dma_save_regs(pd);
> >  
> > -	pci_save_state(pdev);
> > -	pci_disable_device(pdev);
> > -	pci_set_power_state(pdev, pci_choose_state(pdev, state));
> > -
> >  	return 0;
> >  }
> >  
> > -static int pch_dma_resume(struct pci_dev *pdev)
> > +static int __maybe_unused pch_dma_resume(struct device *dev)
> >  {
> > -	struct pch_dma *pd = pci_get_drvdata(pdev);
> > -	int err;
> > -
> > -	pci_set_power_state(pdev, PCI_D0);
> > -	pci_restore_state(pdev);
> > -
> > -	err = pci_enable_device(pdev);
> > -	if (err) {
> > -		dev_dbg(&pdev->dev, "failed to enable device\n");
> > -		return err;
> > -	}
> > +	struct pch_dma *pd = dev_get_drvdata(dev);
> >  
> >  	if (pd)
> >  		pch_dma_restore_regs(pd);
> >  
> >  	return 0;
> >  }
> > -#endif
> >  
> >  static int pch_dma_probe(struct pci_dev *pdev,
> >  				   const struct pci_device_id *id)
> > @@ -993,15 +977,14 @@ static const struct pci_device_id pch_dma_id_table[] = {
> >  	{ 0, },
> >  };
> >  
> > +static SIMPLE_DEV_PM_OPS(pch_dma_pm_ops, pch_dma_suspend, pch_dma_resume);
> > +
> >  static struct pci_driver pch_dma_driver = {
> >  	.name		= DRV_NAME,
> >  	.id_table	= pch_dma_id_table,
> >  	.probe		= pch_dma_probe,
> >  	.remove		= pch_dma_remove,
> > -#ifdef CONFIG_PM
> > -	.suspend	= pch_dma_suspend,
> > -	.resume		= pch_dma_resume,
> > -#endif
> > +	.driver.pm	= &pch_dma_pm_ops,
> >  };
> >  
> >  module_pci_driver(pch_dma_driver);
> > -- 
> > 2.27.0
> 
> -- 
> ~Vinod

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH v1] dmaengine: pch_dma: use generic power management
  2020-07-27  8:56 ` Vinod Koul
  2020-07-27 10:25   ` Vaibhav Gupta
@ 2020-07-27 11:19   ` Andy Shevchenko
  2020-07-27 13:08     ` Vaibhav Gupta
  1 sibling, 1 reply; 5+ messages in thread
From: Andy Shevchenko @ 2020-07-27 11:19 UTC (permalink / raw)
  To: Vinod Koul
  Cc: Vaibhav Gupta, Bjorn Helgaas, Bjorn Helgaas, Bjorn Helgaas,
	Vaibhav Gupta, Dan Williams, Shuah Khan,
	Linux Kernel Mailing List, linux-kernel-mentees, dmaengine

On Mon, Jul 27, 2020 at 1:16 PM Vinod Koul <vkoul@kernel.org> wrote:
> On 20-07-20, 17:07, Vaibhav Gupta wrote:
> > Drivers using legacy PM have to manage PCI states and device's PM states
> > themselves. They also need to take care of configuration registers.
> >
> > With improved and powerful support of generic PM, PCI Core takes care of
> > above mentioned, device-independent, jobs.
> >
> > This driver makes use of PCI helper functions like
> > pci_save/restore_state(), pci_enable/disable_device(),
> > and pci_set_power_state() to do required operations. In generic mode, they
> > are no longer needed.
> >
> > Change function parameter in both .suspend() and .resume() to
> > "struct device*" type. Use dev_get_drvdata() to get drv data.
>
> You are doing too many things in One patch. Do consider splitting them
> up to a change per patch. for example using __maybe could be one patch,
> removing code is suspend-resume callbacks would be other one.

Vinod, while I completely agree with you in general, in this case it
would make more unnecessary churn and will be rather unhelpful in all
ways: for the contributor to do this work, for the reader to collect
all the pieces. It also will be a bisectability issue, because the
#ifdeffery replacement (IIRC you need to move from CONFIG_PM to
CONFIG_PM_SLEEP). I really don't see any advantages of the splitting
here.

> > Compile-tested only.
>
> I would like to see some testing before we merge this

I have hardware to test (Intel Minnowboard v1) but have no time. And
taking into account that I did similar changes for many other drivers,
I can give my
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
and take responsibility if somebody complains in the future (I don't
believe it will be one).

P.S. Another scenario if Vaibhav can find that board (there were
dozens of thousands at least produced and floating on the second hand
market) and test himself. It may be good since he touches the full lot
of PCH (EGT20) drivers.

> > Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
> > ---
> >  drivers/dma/pch_dma.c | 35 +++++++++--------------------------
> >  1 file changed, 9 insertions(+), 26 deletions(-)
> >
> > diff --git a/drivers/dma/pch_dma.c b/drivers/dma/pch_dma.c
> > index a3b0b4c56a19..e93005837e3f 100644
> > --- a/drivers/dma/pch_dma.c
> > +++ b/drivers/dma/pch_dma.c
> > @@ -735,8 +735,7 @@ static irqreturn_t pd_irq(int irq, void *devid)
> >       return ret0 | ret2;
> >  }
> >
> > -#ifdef       CONFIG_PM
> > -static void pch_dma_save_regs(struct pch_dma *pd)
> > +static void __maybe_unused pch_dma_save_regs(struct pch_dma *pd)
> >  {
> >       struct pch_dma_chan *pd_chan;
> >       struct dma_chan *chan, *_c;
> > @@ -759,7 +758,7 @@ static void pch_dma_save_regs(struct pch_dma *pd)
> >       }
> >  }
> >
> > -static void pch_dma_restore_regs(struct pch_dma *pd)
> > +static void __maybe_unused pch_dma_restore_regs(struct pch_dma *pd)
> >  {
> >       struct pch_dma_chan *pd_chan;
> >       struct dma_chan *chan, *_c;
> > @@ -782,40 +781,25 @@ static void pch_dma_restore_regs(struct pch_dma *pd)
> >       }
> >  }
> >
> > -static int pch_dma_suspend(struct pci_dev *pdev, pm_message_t state)
> > +static int __maybe_unused pch_dma_suspend(struct device *dev)
> >  {
> > -     struct pch_dma *pd = pci_get_drvdata(pdev);
> > +     struct pch_dma *pd = dev_get_drvdata(dev);
> >
> >       if (pd)
> >               pch_dma_save_regs(pd);
> >
> > -     pci_save_state(pdev);
> > -     pci_disable_device(pdev);
> > -     pci_set_power_state(pdev, pci_choose_state(pdev, state));
> > -
> >       return 0;
> >  }
> >
> > -static int pch_dma_resume(struct pci_dev *pdev)
> > +static int __maybe_unused pch_dma_resume(struct device *dev)
> >  {
> > -     struct pch_dma *pd = pci_get_drvdata(pdev);
> > -     int err;
> > -
> > -     pci_set_power_state(pdev, PCI_D0);
> > -     pci_restore_state(pdev);
> > -
> > -     err = pci_enable_device(pdev);
> > -     if (err) {
> > -             dev_dbg(&pdev->dev, "failed to enable device\n");
> > -             return err;
> > -     }
> > +     struct pch_dma *pd = dev_get_drvdata(dev);
> >
> >       if (pd)
> >               pch_dma_restore_regs(pd);
> >
> >       return 0;
> >  }
> > -#endif
> >
> >  static int pch_dma_probe(struct pci_dev *pdev,
> >                                  const struct pci_device_id *id)
> > @@ -993,15 +977,14 @@ static const struct pci_device_id pch_dma_id_table[] = {
> >       { 0, },
> >  };
> >
> > +static SIMPLE_DEV_PM_OPS(pch_dma_pm_ops, pch_dma_suspend, pch_dma_resume);
> > +
> >  static struct pci_driver pch_dma_driver = {
> >       .name           = DRV_NAME,
> >       .id_table       = pch_dma_id_table,
> >       .probe          = pch_dma_probe,
> >       .remove         = pch_dma_remove,
> > -#ifdef CONFIG_PM
> > -     .suspend        = pch_dma_suspend,
> > -     .resume         = pch_dma_resume,
> > -#endif
> > +     .driver.pm      = &pch_dma_pm_ops,
> >  };
> >
> >  module_pci_driver(pch_dma_driver);
> > --
> > 2.27.0
>
> --
> ~Vinod



-- 
With Best Regards,
Andy Shevchenko

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH v1] dmaengine: pch_dma: use generic power management
  2020-07-27 11:19   ` Andy Shevchenko
@ 2020-07-27 13:08     ` Vaibhav Gupta
  0 siblings, 0 replies; 5+ messages in thread
From: Vaibhav Gupta @ 2020-07-27 13:08 UTC (permalink / raw)
  To: Andy Shevchenko
  Cc: Vinod Koul, Bjorn Helgaas, Bjorn Helgaas, Bjorn Helgaas,
	Vaibhav Gupta, Dan Williams, Shuah Khan,
	Linux Kernel Mailing List, linux-kernel-mentees, dmaengine

On Mon, Jul 27, 2020 at 02:19:14PM +0300, Andy Shevchenko wrote:
> On Mon, Jul 27, 2020 at 1:16 PM Vinod Koul <vkoul@kernel.org> wrote:
> > On 20-07-20, 17:07, Vaibhav Gupta wrote:
> > > Drivers using legacy PM have to manage PCI states and device's PM states
> > > themselves. They also need to take care of configuration registers.
> > >
> > > With improved and powerful support of generic PM, PCI Core takes care of
> > > above mentioned, device-independent, jobs.
> > >
> > > This driver makes use of PCI helper functions like
> > > pci_save/restore_state(), pci_enable/disable_device(),
> > > and pci_set_power_state() to do required operations. In generic mode, they
> > > are no longer needed.
> > >
> > > Change function parameter in both .suspend() and .resume() to
> > > "struct device*" type. Use dev_get_drvdata() to get drv data.
> >
> > You are doing too many things in One patch. Do consider splitting them
> > up to a change per patch. for example using __maybe could be one patch,
> > removing code is suspend-resume callbacks would be other one.
> 
> Vinod, while I completely agree with you in general, in this case it
> would make more unnecessary churn and will be rather unhelpful in all
> ways: for the contributor to do this work, for the reader to collect
> all the pieces. It also will be a bisectability issue, because the
> #ifdeffery replacement (IIRC you need to move from CONFIG_PM to
> CONFIG_PM_SLEEP). I really don't see any advantages of the splitting
> here.
> 
> > > Compile-tested only.
> >
> > I would like to see some testing before we merge this
> 
> I have hardware to test (Intel Minnowboard v1) but have no time. And
> taking into account that I did similar changes for many other drivers,
> I can give my
> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> and take responsibility if somebody complains in the future (I don't
> believe it will be one).
>
Thanks! :D 
> P.S. Another scenario if Vaibhav can find that board (there were
> dozens of thousands at least produced and floating on the second hand
> market) and test himself. It may be good since he touches the full lot
> of PCH (EGT20) drivers.
> 
I cannot promise, but surely will try to get my hands on it :)

Thanks
Vaibhav Gupta
> > > Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
> > > ---
> > >  drivers/dma/pch_dma.c | 35 +++++++++--------------------------
> > >  1 file changed, 9 insertions(+), 26 deletions(-)
> > >
> > > diff --git a/drivers/dma/pch_dma.c b/drivers/dma/pch_dma.c
> > > index a3b0b4c56a19..e93005837e3f 100644
> > > --- a/drivers/dma/pch_dma.c
> > > +++ b/drivers/dma/pch_dma.c
> > > @@ -735,8 +735,7 @@ static irqreturn_t pd_irq(int irq, void *devid)
> > >       return ret0 | ret2;
> > >  }
> > >
> > > -#ifdef       CONFIG_PM
> > > -static void pch_dma_save_regs(struct pch_dma *pd)
> > > +static void __maybe_unused pch_dma_save_regs(struct pch_dma *pd)
> > >  {
> > >       struct pch_dma_chan *pd_chan;
> > >       struct dma_chan *chan, *_c;
> > > @@ -759,7 +758,7 @@ static void pch_dma_save_regs(struct pch_dma *pd)
> > >       }
> > >  }
> > >
> > > -static void pch_dma_restore_regs(struct pch_dma *pd)
> > > +static void __maybe_unused pch_dma_restore_regs(struct pch_dma *pd)
> > >  {
> > >       struct pch_dma_chan *pd_chan;
> > >       struct dma_chan *chan, *_c;
> > > @@ -782,40 +781,25 @@ static void pch_dma_restore_regs(struct pch_dma *pd)
> > >       }
> > >  }
> > >
> > > -static int pch_dma_suspend(struct pci_dev *pdev, pm_message_t state)
> > > +static int __maybe_unused pch_dma_suspend(struct device *dev)
> > >  {
> > > -     struct pch_dma *pd = pci_get_drvdata(pdev);
> > > +     struct pch_dma *pd = dev_get_drvdata(dev);
> > >
> > >       if (pd)
> > >               pch_dma_save_regs(pd);
> > >
> > > -     pci_save_state(pdev);
> > > -     pci_disable_device(pdev);
> > > -     pci_set_power_state(pdev, pci_choose_state(pdev, state));
> > > -
> > >       return 0;
> > >  }
> > >
> > > -static int pch_dma_resume(struct pci_dev *pdev)
> > > +static int __maybe_unused pch_dma_resume(struct device *dev)
> > >  {
> > > -     struct pch_dma *pd = pci_get_drvdata(pdev);
> > > -     int err;
> > > -
> > > -     pci_set_power_state(pdev, PCI_D0);
> > > -     pci_restore_state(pdev);
> > > -
> > > -     err = pci_enable_device(pdev);
> > > -     if (err) {
> > > -             dev_dbg(&pdev->dev, "failed to enable device\n");
> > > -             return err;
> > > -     }
> > > +     struct pch_dma *pd = dev_get_drvdata(dev);
> > >
> > >       if (pd)
> > >               pch_dma_restore_regs(pd);
> > >
> > >       return 0;
> > >  }
> > > -#endif
> > >
> > >  static int pch_dma_probe(struct pci_dev *pdev,
> > >                                  const struct pci_device_id *id)
> > > @@ -993,15 +977,14 @@ static const struct pci_device_id pch_dma_id_table[] = {
> > >       { 0, },
> > >  };
> > >
> > > +static SIMPLE_DEV_PM_OPS(pch_dma_pm_ops, pch_dma_suspend, pch_dma_resume);
> > > +
> > >  static struct pci_driver pch_dma_driver = {
> > >       .name           = DRV_NAME,
> > >       .id_table       = pch_dma_id_table,
> > >       .probe          = pch_dma_probe,
> > >       .remove         = pch_dma_remove,
> > > -#ifdef CONFIG_PM
> > > -     .suspend        = pch_dma_suspend,
> > > -     .resume         = pch_dma_resume,
> > > -#endif
> > > +     .driver.pm      = &pch_dma_pm_ops,
> > >  };
> > >
> > >  module_pci_driver(pch_dma_driver);
> > > --
> > > 2.27.0
> >
> > --
> > ~Vinod
> 
> 
> 
> -- 
> With Best Regards,
> Andy Shevchenko

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, back to index

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-20 11:37 [PATCH v1] dmaengine: pch_dma: use generic power management Vaibhav Gupta
2020-07-27  8:56 ` Vinod Koul
2020-07-27 10:25   ` Vaibhav Gupta
2020-07-27 11:19   ` Andy Shevchenko
2020-07-27 13:08     ` Vaibhav Gupta

dmaengine Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/dmaengine/0 dmaengine/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dmaengine dmaengine/ https://lore.kernel.org/dmaengine \
		dmaengine@vger.kernel.org
	public-inbox-index dmaengine

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.dmaengine


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git