From: "Gustavo A. R. Silva" <gustavoars@kernel.org>
To: Vinod Koul <vkoul@kernel.org>,
Dan Williams <dan.j.williams@intel.com>,
Li Yang <leoyang.li@nxp.com>, Zhang Wei <zw@zh-kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>,
Alexei Starovoitov <ast@kernel.org>,
Daniel Borkmann <daniel@iogearbox.net>,
Martin KaFai Lau <kafai@fb.com>, Song Liu <songliubraving@fb.com>,
Yonghong Song <yhs@fb.com>, Andrii Nakryiko <andriin@fb.com>,
John Fastabend <john.fastabend@gmail.com>,
KP Singh <kpsingh@chromium.org>
Cc: dmaengine@vger.kernel.org, linux-kernel@vger.kernel.org,
linuxppc-dev@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org, netdev@vger.kernel.org,
bpf@vger.kernel.org,
"Gustavo A. R. Silva" <gustavoars@kernel.org>
Subject: [PATCH][next] dmaengine: Use fallthrough pseudo-keyword
Date: Mon, 27 Jul 2020 15:34:13 -0500 [thread overview]
Message-ID: <20200727203413.GA6245@embeddedor> (raw)
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.
[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
---
drivers/dma/amba-pl08x.c | 10 +++++-----
drivers/dma/fsldma.c | 2 +-
drivers/dma/imx-dma.c | 2 +-
drivers/dma/iop-adma.h | 12 ++++++------
drivers/dma/nbpfaxi.c | 2 +-
drivers/dma/pl330.c | 10 +++-------
drivers/dma/sh/shdma-base.c | 2 +-
7 files changed, 18 insertions(+), 22 deletions(-)
diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c
index 9adc7a2fa3d3..a24882ba3764 100644
--- a/drivers/dma/amba-pl08x.c
+++ b/drivers/dma/amba-pl08x.c
@@ -1767,7 +1767,7 @@ static u32 pl08x_memcpy_cctl(struct pl08x_driver_data *pl08x)
default:
dev_err(&pl08x->adev->dev,
"illegal burst size for memcpy, set to 1\n");
- /* Fall through */
+ fallthrough;
case PL08X_BURST_SZ_1:
cctl |= PL080_BSIZE_1 << PL080_CONTROL_SB_SIZE_SHIFT |
PL080_BSIZE_1 << PL080_CONTROL_DB_SIZE_SHIFT;
@@ -1806,7 +1806,7 @@ static u32 pl08x_memcpy_cctl(struct pl08x_driver_data *pl08x)
default:
dev_err(&pl08x->adev->dev,
"illegal bus width for memcpy, set to 8 bits\n");
- /* Fall through */
+ fallthrough;
case PL08X_BUS_WIDTH_8_BITS:
cctl |= PL080_WIDTH_8BIT << PL080_CONTROL_SWIDTH_SHIFT |
PL080_WIDTH_8BIT << PL080_CONTROL_DWIDTH_SHIFT;
@@ -1850,7 +1850,7 @@ static u32 pl08x_ftdmac020_memcpy_cctl(struct pl08x_driver_data *pl08x)
default:
dev_err(&pl08x->adev->dev,
"illegal bus width for memcpy, set to 8 bits\n");
- /* Fall through */
+ fallthrough;
case PL08X_BUS_WIDTH_8_BITS:
cctl |= PL080_WIDTH_8BIT << FTDMAC020_LLI_SRC_WIDTH_SHIFT |
PL080_WIDTH_8BIT << FTDMAC020_LLI_DST_WIDTH_SHIFT;
@@ -2612,7 +2612,7 @@ static int pl08x_of_probe(struct amba_device *adev,
switch (val) {
default:
dev_err(&adev->dev, "illegal burst size for memcpy, set to 1\n");
- /* Fall through */
+ fallthrough;
case 1:
pd->memcpy_burst_size = PL08X_BURST_SZ_1;
break;
@@ -2647,7 +2647,7 @@ static int pl08x_of_probe(struct amba_device *adev,
switch (val) {
default:
dev_err(&adev->dev, "illegal bus width for memcpy, set to 8 bits\n");
- /* Fall through */
+ fallthrough;
case 8:
pd->memcpy_bus_width = PL08X_BUS_WIDTH_8_BITS;
break;
diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c
index ad72b3f42ffa..e342cf52d296 100644
--- a/drivers/dma/fsldma.c
+++ b/drivers/dma/fsldma.c
@@ -1163,7 +1163,7 @@ static int fsl_dma_chan_probe(struct fsldma_device *fdev,
switch (chan->feature & FSL_DMA_IP_MASK) {
case FSL_DMA_IP_85XX:
chan->toggle_ext_pause = fsl_chan_toggle_ext_pause;
- /* Fall through */
+ fallthrough;
case FSL_DMA_IP_83XX:
chan->toggle_ext_start = fsl_chan_toggle_ext_start;
chan->set_src_loop_size = fsl_chan_set_src_loop_size;
diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c
index 5c0fb3134825..88717506c1f6 100644
--- a/drivers/dma/imx-dma.c
+++ b/drivers/dma/imx-dma.c
@@ -556,7 +556,7 @@ static int imxdma_xfer_desc(struct imxdma_desc *d)
* We fall-through here intentionally, since a 2D transfer is
* similar to MEMCPY just adding the 2D slot configuration.
*/
- /* Fall through */
+ fallthrough;
case IMXDMA_DESC_MEMCPY:
imx_dmav1_writel(imxdma, d->src, DMA_SAR(imxdmac->channel));
imx_dmav1_writel(imxdma, d->dest, DMA_DAR(imxdmac->channel));
diff --git a/drivers/dma/iop-adma.h b/drivers/dma/iop-adma.h
index c499c9578f00..d44eabb6f5eb 100644
--- a/drivers/dma/iop-adma.h
+++ b/drivers/dma/iop-adma.h
@@ -496,7 +496,7 @@ iop3xx_desc_init_xor(struct iop3xx_desc_aau *hw_desc, int src_cnt,
}
hw_desc->src_edc[AAU_EDCR2_IDX].e_desc_ctrl = edcr;
src_cnt = 24;
- /* fall through */
+ fallthrough;
case 17 ... 24:
if (!u_desc_ctrl.field.blk_ctrl) {
hw_desc->src_edc[AAU_EDCR2_IDX].e_desc_ctrl = 0;
@@ -510,7 +510,7 @@ iop3xx_desc_init_xor(struct iop3xx_desc_aau *hw_desc, int src_cnt,
}
hw_desc->src_edc[AAU_EDCR1_IDX].e_desc_ctrl = edcr;
src_cnt = 16;
- /* fall through */
+ fallthrough;
case 9 ... 16:
if (!u_desc_ctrl.field.blk_ctrl)
u_desc_ctrl.field.blk_ctrl = 0x2; /* use EDCR0 */
@@ -522,7 +522,7 @@ iop3xx_desc_init_xor(struct iop3xx_desc_aau *hw_desc, int src_cnt,
}
hw_desc->src_edc[AAU_EDCR0_IDX].e_desc_ctrl = edcr;
src_cnt = 8;
- /* fall through */
+ fallthrough;
case 2 ... 8:
shift = 1;
for (i = 0; i < src_cnt; i++) {
@@ -602,19 +602,19 @@ iop_desc_init_null_xor(struct iop_adma_desc_slot *desc, int src_cnt,
case 25 ... 32:
u_desc_ctrl.field.blk_ctrl = 0x3; /* use EDCR[2:0] */
hw_desc->src_edc[AAU_EDCR2_IDX].e_desc_ctrl = 0;
- /* fall through */
+ fallthrough;
case 17 ... 24:
if (!u_desc_ctrl.field.blk_ctrl) {
hw_desc->src_edc[AAU_EDCR2_IDX].e_desc_ctrl = 0;
u_desc_ctrl.field.blk_ctrl = 0x3; /* use EDCR[2:0] */
}
hw_desc->src_edc[AAU_EDCR1_IDX].e_desc_ctrl = 0;
- /* fall through */
+ fallthrough;
case 9 ... 16:
if (!u_desc_ctrl.field.blk_ctrl)
u_desc_ctrl.field.blk_ctrl = 0x2; /* use EDCR0 */
hw_desc->src_edc[AAU_EDCR0_IDX].e_desc_ctrl = 0;
- /* fall through */
+ fallthrough;
case 1 ... 8:
if (!u_desc_ctrl.field.blk_ctrl && src_cnt > 4)
u_desc_ctrl.field.blk_ctrl = 0x1; /* use mini-desc */
diff --git a/drivers/dma/nbpfaxi.c b/drivers/dma/nbpfaxi.c
index 74df621402e1..ca4e0930207a 100644
--- a/drivers/dma/nbpfaxi.c
+++ b/drivers/dma/nbpfaxi.c
@@ -483,7 +483,7 @@ static size_t nbpf_xfer_size(struct nbpf_device *nbpf,
default:
pr_warn("%s(): invalid bus width %u\n", __func__, width);
- /* fall through */
+ fallthrough;
case DMA_SLAVE_BUSWIDTH_1_BYTE:
size = burst;
}
diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index 2c508ee672b9..9b69716172a4 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -1061,16 +1061,16 @@ static bool _start(struct pl330_thread *thrd)
if (_state(thrd) == PL330_STATE_KILLING)
UNTIL(thrd, PL330_STATE_STOPPED)
- /* fall through */
+ fallthrough;
case PL330_STATE_FAULTING:
_stop(thrd);
- /* fall through */
+ fallthrough;
case PL330_STATE_KILLING:
case PL330_STATE_COMPLETING:
UNTIL(thrd, PL330_STATE_STOPPED)
- /* fall through */
+ fallthrough;
case PL330_STATE_STOPPED:
return _trigger(thrd);
@@ -1121,7 +1121,6 @@ static u32 _emit_load(unsigned int dry_run, u8 buf[],
switch (direction) {
case DMA_MEM_TO_MEM:
- /* fall through */
case DMA_MEM_TO_DEV:
off += _emit_LD(dry_run, &buf[off], cond);
break;
@@ -1155,7 +1154,6 @@ static inline u32 _emit_store(unsigned int dry_run, u8 buf[],
switch (direction) {
case DMA_MEM_TO_MEM:
- /* fall through */
case DMA_DEV_TO_MEM:
off += _emit_ST(dry_run, &buf[off], cond);
break;
@@ -1216,7 +1214,6 @@ static int _bursts(struct pl330_dmac *pl330, unsigned dry_run, u8 buf[],
switch (pxs->desc->rqtype) {
case DMA_MEM_TO_DEV:
- /* fall through */
case DMA_DEV_TO_MEM:
off += _ldst_peripheral(pl330, dry_run, &buf[off], pxs, cyc,
cond);
@@ -1266,7 +1263,6 @@ static int _dregs(struct pl330_dmac *pl330, unsigned int dry_run, u8 buf[],
switch (pxs->desc->rqtype) {
case DMA_MEM_TO_DEV:
- /* fall through */
case DMA_DEV_TO_MEM:
off += _emit_MOV(dry_run, &buf[off], CCR, dregs_ccr);
off += _ldst_peripheral(pl330, dry_run, &buf[off], pxs, 1,
diff --git a/drivers/dma/sh/shdma-base.c b/drivers/dma/sh/shdma-base.c
index 2deeaab078a4..788d696323bb 100644
--- a/drivers/dma/sh/shdma-base.c
+++ b/drivers/dma/sh/shdma-base.c
@@ -383,7 +383,7 @@ static dma_async_tx_callback __ld_cleanup(struct shdma_chan *schan, bool all)
switch (desc->mark) {
case DESC_COMPLETED:
desc->mark = DESC_WAITING;
- /* Fall through */
+ fallthrough;
case DESC_WAITING:
if (head_acked)
async_tx_ack(&desc->async_tx);
--
2.27.0
next reply other threads:[~2020-07-27 20:28 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-27 20:34 Gustavo A. R. Silva [this message]
2020-08-05 13:19 ` [PATCH][next] dmaengine: Use fallthrough pseudo-keyword Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200727203413.GA6245@embeddedor \
--to=gustavoars@kernel.org \
--cc=andriin@fb.com \
--cc=ast@kernel.org \
--cc=bpf@vger.kernel.org \
--cc=dan.j.williams@intel.com \
--cc=daniel@iogearbox.net \
--cc=dmaengine@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=john.fastabend@gmail.com \
--cc=kafai@fb.com \
--cc=kernel@pengutronix.de \
--cc=kpsingh@chromium.org \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=netdev@vger.kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=songliubraving@fb.com \
--cc=vkoul@kernel.org \
--cc=yhs@fb.com \
--cc=zw@zh-kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).