dmaengine.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sia Jee Heng <jee.heng.sia@intel.com>
To: vkoul@kernel.org, Eugeniy.Paltsev@synopsys.com
Cc: andriy.shevchenko@linux.intel.com, dmaengine@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 12/15] dmaengine: dw-axi-dmac: Add Intel KeemBay DMA register fields
Date: Mon, 12 Oct 2020 12:21:57 +0800	[thread overview]
Message-ID: <20201012042200.29787-13-jee.heng.sia@intel.com> (raw)
In-Reply-To: <20201012042200.29787-1-jee.heng.sia@intel.com>

Add support for Intel KeemBay DMA registers. These registers are required
to run data transfer between device to memory and memory to device on Intel
KeemBay SoC.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
---
 drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c |  4 ++++
 drivers/dma/dw-axi-dmac/dw-axi-dmac.h          | 14 ++++++++++++++
 2 files changed, 18 insertions(+)

diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
index ce89b4dee1dc..19806c586e81 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
@@ -1252,6 +1252,10 @@ static int dw_probe(struct platform_device *pdev)
 	if (IS_ERR(chip->regs))
 		return PTR_ERR(chip->regs);
 
+	chip->apb_regs = devm_platform_ioremap_resource(pdev, 1);
+	if (IS_ERR(chip->apb_regs))
+		dev_warn(&pdev->dev, "apb_regs not supported\n");
+
 	chip->core_clk = devm_clk_get(chip->dev, "core-clk");
 	if (IS_ERR(chip->core_clk))
 		return PTR_ERR(chip->core_clk);
diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
index bdb66d775125..f64e8d33b127 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
@@ -63,6 +63,7 @@ struct axi_dma_chip {
 	struct device		*dev;
 	int			irq;
 	void __iomem		*regs;
+	void __iomem		*apb_regs;
 	struct clk		*core_clk;
 	struct clk		*cfgr_clk;
 	struct dw_axi_dma	*dw;
@@ -169,6 +170,19 @@ static inline struct axi_dma_chan *dchan_to_axi_dma_chan(struct dma_chan *dchan)
 #define CH_INTSIGNAL_ENA	0x090 /* R/W Chan Interrupt Signal Enable */
 #define CH_INTCLEAR		0x098 /* W Chan Interrupt Clear */
 
+/* Apb slave registers */
+#define DMAC_APB_CFG		0x000 /* DMAC Apb Configuration Register */
+#define DMAC_APB_STAT		0x004 /* DMAC Apb Status Register */
+#define DMAC_APB_DEBUG_STAT_0	0x008 /* DMAC Apb Debug Status Register 0 */
+#define DMAC_APB_DEBUG_STAT_1	0x00C /* DMAC Apb Debug Status Register 1 */
+#define DMAC_APB_HW_HS_SEL_0	0x010 /* DMAC Apb HW HS register 0 */
+#define DMAC_APB_HW_HS_SEL_1	0x014 /* DMAC Apb HW HS register 1 */
+#define DMAC_APB_LPI		0x018 /* DMAC Apb Low Power Interface Reg */
+#define DMAC_APB_BYTE_WR_CH_EN	0x01C /* DMAC Apb Byte Write Enable */
+#define DMAC_APB_HALFWORD_WR_CH_EN	0x020 /* DMAC Halfword write enables */
+
+#define UNUSED_CHANNEL		0x3F /* Set unused DMA channel to 0x3F */
+#define MAX_BLOCK_SIZE		0x1000 /* 1024 blocks * 4 bytes data width */
 
 /* DMAC_CFG */
 #define DMAC_EN_POS			0
-- 
2.18.0


  parent reply	other threads:[~2020-10-12  4:39 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-12  4:21 [PATCH 00/15] dmaengine: dw-axi-dmac: support Intel KeemBay AxiDMA Sia Jee Heng
2020-10-12  4:21 ` [PATCH 01/15] dt-bindings: dma: Add YAML schemas for dw-axi-dmac Sia Jee Heng
2020-10-12  4:21 ` [PATCH 02/15] dmaengine: dw-axi-dmac: simplify descriptor management Sia Jee Heng
2020-10-12  4:21 ` [PATCH 03/15] dmaengine: dw-axi-dmac: move dma_pool_create() to alloc_chan_resources() Sia Jee Heng
2020-10-12  4:21 ` [PATCH 04/15] dmaengine: dw-axi-dmac: Add device_synchronize() callback Sia Jee Heng
2020-10-12  4:21 ` [PATCH 05/15] dmaengine: dw-axi-dmac: Add device_config operation Sia Jee Heng
2020-10-12  4:21 ` [PATCH 06/15] dmaengine: dw-axi-dmac: Support device_prep_slave_sg Sia Jee Heng
2020-10-12  4:21 ` [PATCH 07/15] dmaegine: dw-axi-dmac: Support device_prep_dma_cyclic() Sia Jee Heng
2020-10-12  4:21 ` [PATCH 08/15] dmaengine: dw-axi-dmac: Support of_dma_controller_register() Sia Jee Heng
2020-10-12  4:21 ` [PATCH 09/15] dmaengine: dw-axi-dmac: Support burst residue granularity Sia Jee Heng
2020-10-12  4:21 ` [PATCH 10/15] dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA support Sia Jee Heng
2020-10-12  4:21 ` [PATCH 11/15] dt-binding: dma: dw-axi-dmac: Add support for Intel KeemBay AxiDMA Sia Jee Heng
2020-10-12  4:21 ` Sia Jee Heng [this message]
2020-10-12  4:21 ` [PATCH 13/15] dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA handshake Sia Jee Heng
2020-10-12  4:21 ` [PATCH 14/15] dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA BYTE and HALFWORD registers Sia Jee Heng
2020-10-12  4:22 ` [PATCH 15/15] dmaengine: dw-axi-dmac: Set constraint to the Max segment size Sia Jee Heng
2020-10-12 13:59 ` [PATCH 00/15] dmaengine: dw-axi-dmac: support Intel KeemBay AxiDMA Andy Shevchenko
2020-10-13  5:49   ` Sia, Jee Heng
2020-10-13  7:01     ` Vinod Koul
2020-10-13  7:12       ` Sia, Jee Heng
2020-10-13  7:16         ` Vinod Koul
2020-10-16 14:51 ` Eugeniy Paltsev
2020-10-19  1:22   ` Sia, Jee Heng
2020-10-19 11:39     ` andriy.shevchenko
2020-10-21  1:54       ` Sia, Jee Heng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201012042200.29787-13-jee.heng.sia@intel.com \
    --to=jee.heng.sia@intel.com \
    --cc=Eugeniy.Paltsev@synopsys.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=dmaengine@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).