[PATCH 00/15] dmaengine: dw-axi-dmac: support Intel KeemBay AxiDMA

[PATCH 00/15] dmaengine: dw-axi-dmac: support Intel KeemBay AxiDMA

[Sia Jee Heng]

The below patch series are to support AxiDMA running on Intel KeemBay SoC.
The base driver is dw-axi-dmac but code refactoring is needed, for example:
- Support YAML Schemas DT binding.
- Replacing Linked List with virtual descriptor management.
- Remove unrelated hw desc stuff from dma memory pool.
- Manage dma memory pool alloc/destroy based on channel activity.
- Support dmaengine device_sync() callback.
- Support dmaengine device_config().
- Support dmaegnine device_prep_slave_sg().
- Support dmaengine device_prep_dma_cyclic().
- Support of_dma_controller_register().
- Support burst residue granularity.
- Support Intel KeemBay AxiDMA registers.
- Support Intel KeemBay AxiDMA device handshake.
- Support Intel KeemBay AxiDMA BYTE and HALFWORD device operation.
- Add constraint to Max segment size.

This patch set is to replace the patch series submitted at:
https://lore.kernel.org/dmaengine/1599213094-30144-1-git-send-email-jee.heng.sia@intel.com/

This patch series are tested on Intel KeemBay platform.


Sia Jee Heng (15):
  dt-bindings: dma: Add YAML schemas for dw-axi-dmac
  dmaengine: dw-axi-dmac: simplify descriptor management
  dmaengine: dw-axi-dmac: move dma_pool_create() to
    alloc_chan_resources()
  dmaengine: dw-axi-dmac: Add device_synchronize() callback
  dmaengine: dw-axi-dmac: Add device_config operation
  dmaengine: dw-axi-dmac: Support device_prep_slave_sg
  dmaegine: dw-axi-dmac: Support device_prep_dma_cyclic()
  dmaengine: dw-axi-dmac: Support of_dma_controller_register()
  dmaengine: dw-axi-dmac: Support burst residue granularity
  dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA support
  dt-binding: dma: dw-axi-dmac: Add support for Intel KeemBay AxiDMA
  dmaengine: dw-axi-dmac: Add Intel KeemBay DMA register fields
  dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA handshake
  dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA BYTE and HALFWORD
    registers
  dmaengine: dw-axi-dmac: Set constraint to the Max segment size

 .../bindings/dma/snps,dw-axi-dmac.txt         |  39 -
 .../bindings/dma/snps,dw-axi-dmac.yaml        | 149 ++++
 .../dma/dw-axi-dmac/dw-axi-dmac-platform.c    | 696 +++++++++++++++---
 drivers/dma/dw-axi-dmac/dw-axi-dmac.h         |  33 +-
 4 files changed, 783 insertions(+), 134 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.txt
 create mode 100644 Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml

-- 
2.18.0

[PATCH 01/15] dt-bindings: dma: Add YAML schemas for dw-axi-dmac

[Sia Jee Heng]

YAML schemas Device Tree (DT) binding is the new format for DT to replace
the old format. Introduce YAML schemas DT binding for dw-axi-dmac and
remove the old version.

Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
---
 .../bindings/dma/snps,dw-axi-dmac.txt         |  39 ------
 .../bindings/dma/snps,dw-axi-dmac.yaml        | 124 ++++++++++++++++++
 2 files changed, 124 insertions(+), 39 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.txt
 create mode 100644 Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml

diff --git a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.txt b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.txt
deleted file mode 100644
index dbe160400adc..000000000000
--- a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Synopsys DesignWare AXI DMA Controller
-
-Required properties:
-- compatible: "snps,axi-dma-1.01a"
-- reg: Address range of the DMAC registers. This should include
-  all of the per-channel registers.
-- interrupt: Should contain the DMAC interrupt number.
-- dma-channels: Number of channels supported by hardware.
-- snps,dma-masters: Number of AXI masters supported by the hardware.
-- snps,data-width: Maximum AXI data width supported by hardware.
-  (0 - 8bits, 1 - 16bits, 2 - 32bits, ..., 6 - 512bits)
-- snps,priority: Priority of channel. Array size is equal to the number of
-  dma-channels. Priority value must be programmed within [0:dma-channels-1]
-  range. (0 - minimum priority)
-- snps,block-size: Maximum block size supported by the controller channel.
-  Array size is equal to the number of dma-channels.
-
-Optional properties:
-- snps,axi-max-burst-len: Restrict master AXI burst length by value specified
-  in this property. If this property is missing the maximum AXI burst length
-  supported by DMAC is used. [1:256]
-
-Example:
-
-dmac: dma-controller@80000 {
-	compatible = "snps,axi-dma-1.01a";
-	reg = <0x80000 0x400>;
-	clocks = <&core_clk>, <&cfgr_clk>;
-	clock-names = "core-clk", "cfgr-clk";
-	interrupt-parent = <&intc>;
-	interrupts = <27>;
-
-	dma-channels = <4>;
-	snps,dma-masters = <2>;
-	snps,data-width = <3>;
-	snps,block-size = <4096 4096 4096 4096>;
-	snps,priority = <0 1 2 3>;
-	snps,axi-max-burst-len = <16>;
-};
diff --git a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
new file mode 100644
index 000000000000..e688d25864bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/snps,dw-axi-dmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare AXI DMA Controller
+
+maintainers:
+  - Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com
+
+description: |
+ Synopsys DesignWare AXI DMA Controller DT Binding
+
+properties:
+  compatible:
+    enum:
+      - snps,axi-dma-1.01a
+
+  reg:
+    items:
+      - description: Address range of the DMAC registers.
+
+  reg-names:
+    items:
+      - const: axidma_ctrl_regs
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: core-clk
+      - const: cfgr-clk
+
+  '#dma-cells':
+    const: 1
+
+  dma-channels:
+    description: |
+      Number of channels supported by hardware.
+
+  snps,dma-masters:
+    description: |
+      Number of AXI masters supported by the hardware.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [1, 2]
+        default: 2
+
+  snps,data-width:
+    description: |
+      AXI data width supported by hardware.
+      (0 - 8bits, 1 - 16bits, 2 - 32bits, ..., 6 - 512bits)
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [0, 1, 2, 3, 4, 5, 6]
+        default: 4
+
+  snps,priority:
+    description: |
+      Channel priority specifier associated with the DMA channels.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+      - minItems: 1
+        maxItems: 8
+        default: [0, 1, 2, 3]
+
+  snps,block-size:
+    description: |
+      Channel block size specifier associated with the DMA channels.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+      - minItems: 1
+        maxItems: 8
+        default: [4096, 4096, 4096, 4096]
+
+  snps,axi-max-burst-len:
+    description: |
+      Restrict master AXI burst length by value specified in this property.
+      If this property is missing the maximum AXI burst length supported by
+      DMAC is used. [1:256]
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+        default: 16
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - '#dma-cells'
+  - dma-channels
+  - snps,dma-masters
+  - snps,data-width
+  - snps,priority
+  - snps,block-size
+
+examples:
+  - |
+     #include <dt-bindings/interrupt-controller/arm-gic.h>
+     #include <dt-bindings/interrupt-controller/irq.h>
+     /* example with snps,dw-axi-dmac */
+     dmac: dma-controller@80000 {
+         compatible = "snps,axi-dma-1.01a";
+         reg = <0x80000 0x400>;
+         clocks = <&core_clk>, <&cfgr_clk>;
+         clock-names = "core-clk", "cfgr-clk";
+         interrupt-parent = <&intc>;
+         interrupts = <27>;
+         #dma-cells = <1>;
+         dma-channels = <4>;
+         snps,dma-masters = <2>;
+         snps,data-width = <3>;
+         snps,block-size = <4096 4096 4096 4096>;
+         snps,priority = <0 1 2 3>;
+         snps,axi-max-burst-len = <16>;
+     };
-- 
2.18.0

[PATCH 02/15] dmaengine: dw-axi-dmac: simplify descriptor management

[Sia Jee Heng]

Simplify and refactor the descriptor management by removing the redundant
Linked List Item (LLI) queue control logic from the AxiDMA driver.
The descriptor is split into virtual descriptor and hardware LLI so that
only hardware LLI memories are allocated from the DMA memory pool.

Up to 64 descriptors can be allocated within a PAGE_SIZE compare to 16
descriptors in previous version. This solves the problem where an
ALSA driver expects more than 16 DMA descriptors to run.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
---
 .../dma/dw-axi-dmac/dw-axi-dmac-platform.c    | 164 ++++++++++--------
 drivers/dma/dw-axi-dmac/dw-axi-dmac.h         |   9 +-
 2 files changed, 102 insertions(+), 71 deletions(-)

diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
index 14c1ac26f866..8cfd645479e1 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
@@ -21,6 +21,7 @@
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/property.h>
+#include <linux/slab.h>
 #include <linux/types.h>
 
 #include "dw-axi-dmac.h"
@@ -195,43 +196,58 @@ static inline const char *axi_chan_name(struct axi_dma_chan *chan)
 	return dma_chan_name(&chan->vc.chan);
 }
 
-static struct axi_dma_desc *axi_desc_get(struct axi_dma_chan *chan)
+static struct axi_dma_desc *axi_desc_alloc(u32 num)
 {
-	struct dw_axi_dma *dw = chan->chip->dw;
 	struct axi_dma_desc *desc;
+
+	desc = kzalloc(sizeof(*desc), GFP_NOWAIT);
+	if (!desc)
+		return NULL;
+
+	desc->hw_desc = kcalloc(num, sizeof(*desc->hw_desc), GFP_NOWAIT);
+	if (!desc->hw_desc) {
+		kfree(desc);
+		return NULL;
+	}
+
+	return desc;
+}
+
+static struct axi_dma_lli *axi_desc_get(struct axi_dma_chan *chan,
+					dma_addr_t *addr)
+{
+	struct dw_axi_dma *dw = chan->chip->dw;
+	struct axi_dma_lli *lli;
 	dma_addr_t phys;
 
-	desc = dma_pool_zalloc(dw->desc_pool, GFP_NOWAIT, &phys);
-	if (unlikely(!desc)) {
+	lli = dma_pool_zalloc(dw->desc_pool, GFP_NOWAIT, &phys);
+	if (unlikely(!lli)) {
 		dev_err(chan2dev(chan), "%s: not enough descriptors available\n",
 			axi_chan_name(chan));
 		return NULL;
 	}
 
 	atomic_inc(&chan->descs_allocated);
-	INIT_LIST_HEAD(&desc->xfer_list);
-	desc->vd.tx.phys = phys;
-	desc->chan = chan;
+	*addr = phys;
 
-	return desc;
+	return lli;
 }
 
 static void axi_desc_put(struct axi_dma_desc *desc)
 {
 	struct axi_dma_chan *chan = desc->chan;
 	struct dw_axi_dma *dw = chan->chip->dw;
-	struct axi_dma_desc *child, *_next;
-	unsigned int descs_put = 0;
+	int count = atomic_read(&chan->descs_allocated);
+	struct axi_dma_hw_desc *hw_desc;
+	int descs_put;
 
-	list_for_each_entry_safe(child, _next, &desc->xfer_list, xfer_list) {
-		list_del(&child->xfer_list);
-		dma_pool_free(dw->desc_pool, child, child->vd.tx.phys);
-		descs_put++;
+	for (descs_put = 0; descs_put < count; descs_put++) {
+		hw_desc = &desc->hw_desc[descs_put];
+		dma_pool_free(dw->desc_pool, hw_desc->lli, hw_desc->llp);
 	}
 
-	dma_pool_free(dw->desc_pool, desc, desc->vd.tx.phys);
-	descs_put++;
-
+	kfree(desc->hw_desc);
+	kfree(desc);
 	atomic_sub(descs_put, &chan->descs_allocated);
 	dev_vdbg(chan2dev(chan), "%s: %d descs put, %d still allocated\n",
 		axi_chan_name(chan), descs_put,
@@ -258,9 +274,9 @@ dma_chan_tx_status(struct dma_chan *dchan, dma_cookie_t cookie,
 	return ret;
 }
 
-static void write_desc_llp(struct axi_dma_desc *desc, dma_addr_t adr)
+static void write_desc_llp(struct axi_dma_hw_desc *desc, dma_addr_t adr)
 {
-	desc->lli.llp = cpu_to_le64(adr);
+	desc->lli->llp = cpu_to_le64(adr);
 }
 
 static void write_chan_llp(struct axi_dma_chan *chan, dma_addr_t adr)
@@ -295,7 +311,7 @@ static void axi_chan_block_xfer_start(struct axi_dma_chan *chan,
 	       DWAXIDMAC_HS_SEL_HW << CH_CFG_H_HS_SEL_SRC_POS);
 	axi_chan_iowrite32(chan, CH_CFG_H, reg);
 
-	write_chan_llp(chan, first->vd.tx.phys | lms);
+	write_chan_llp(chan, first->hw_desc[0].llp | lms);
 
 	irq_mask = DWAXIDMAC_IRQ_DMA_TRF | DWAXIDMAC_IRQ_ALL_ERR;
 	axi_chan_irq_sig_set(chan, irq_mask);
@@ -378,67 +394,78 @@ static void dma_chan_free_chan_resources(struct dma_chan *dchan)
  * transfer and completes the DMA transfer operation at the end of current
  * block transfer.
  */
-static void set_desc_last(struct axi_dma_desc *desc)
+static void set_desc_last(struct axi_dma_hw_desc *desc)
 {
 	u32 val;
 
-	val = le32_to_cpu(desc->lli.ctl_hi);
+	val = le32_to_cpu(desc->lli->ctl_hi);
 	val |= CH_CTL_H_LLI_LAST;
-	desc->lli.ctl_hi = cpu_to_le32(val);
+	desc->lli->ctl_hi = cpu_to_le32(val);
 }
 
-static void write_desc_sar(struct axi_dma_desc *desc, dma_addr_t adr)
+static void write_desc_sar(struct axi_dma_hw_desc *desc, dma_addr_t adr)
 {
-	desc->lli.sar = cpu_to_le64(adr);
+	desc->lli->sar = cpu_to_le64(adr);
 }
 
-static void write_desc_dar(struct axi_dma_desc *desc, dma_addr_t adr)
+static void write_desc_dar(struct axi_dma_hw_desc *desc, dma_addr_t adr)
 {
-	desc->lli.dar = cpu_to_le64(adr);
+	desc->lli->dar = cpu_to_le64(adr);
 }
 
-static void set_desc_src_master(struct axi_dma_desc *desc)
+static void set_desc_src_master(struct axi_dma_hw_desc *desc)
 {
 	u32 val;
 
 	/* Select AXI0 for source master */
-	val = le32_to_cpu(desc->lli.ctl_lo);
+	val = le32_to_cpu(desc->lli->ctl_lo);
 	val &= ~CH_CTL_L_SRC_MAST;
-	desc->lli.ctl_lo = cpu_to_le32(val);
+	desc->lli->ctl_lo = cpu_to_le32(val);
 }
 
-static void set_desc_dest_master(struct axi_dma_desc *desc)
+static void set_desc_dest_master(struct axi_dma_hw_desc *hw_desc,
+				 struct axi_dma_desc *desc)
 {
 	u32 val;
 
 	/* Select AXI1 for source master if available */
-	val = le32_to_cpu(desc->lli.ctl_lo);
+	val = le32_to_cpu(hw_desc->lli->ctl_lo);
 	if (desc->chan->chip->dw->hdata->nr_masters > 1)
 		val |= CH_CTL_L_DST_MAST;
 	else
 		val &= ~CH_CTL_L_DST_MAST;
 
-	desc->lli.ctl_lo = cpu_to_le32(val);
+	hw_desc->lli->ctl_lo = cpu_to_le32(val);
 }
 
 static struct dma_async_tx_descriptor *
 dma_chan_prep_dma_memcpy(struct dma_chan *dchan, dma_addr_t dst_adr,
 			 dma_addr_t src_adr, size_t len, unsigned long flags)
 {
-	struct axi_dma_desc *first = NULL, *desc = NULL, *prev = NULL;
 	struct axi_dma_chan *chan = dchan_to_axi_dma_chan(dchan);
 	size_t block_ts, max_block_ts, xfer_len;
-	u32 xfer_width, reg;
+	struct axi_dma_hw_desc *hw_desc = NULL;
+	struct axi_dma_desc *desc = NULL;
+	u32 xfer_width, reg, num;
+	u64 llp = 0;
 	u8 lms = 0; /* Select AXI0 master for LLI fetching */
 
 	dev_dbg(chan2dev(chan), "%s: memcpy: src: %pad dst: %pad length: %zd flags: %#lx",
 		axi_chan_name(chan), &src_adr, &dst_adr, len, flags);
 
 	max_block_ts = chan->chip->dw->hdata->block_size[chan->id];
+	xfer_width = axi_chan_get_xfer_width(chan, src_adr, dst_adr, len);
+	num = DIV_ROUND_UP(len, max_block_ts << xfer_width);
+	desc = axi_desc_alloc(num);
+	if (unlikely(!desc))
+		goto err_desc_get;
 
+	desc->chan = chan;
+	num = 0;
 	while (len) {
 		xfer_len = len;
 
+		hw_desc = &desc->hw_desc[num];
 		/*
 		 * Take care for the alignment.
 		 * Actually source and destination widths can be different, but
@@ -457,13 +484,13 @@ dma_chan_prep_dma_memcpy(struct dma_chan *dchan, dma_addr_t dst_adr,
 			xfer_len = max_block_ts << xfer_width;
 		}
 
-		desc = axi_desc_get(chan);
-		if (unlikely(!desc))
+		hw_desc->lli = axi_desc_get(chan, &hw_desc->llp);
+		if (unlikely(!hw_desc->lli))
 			goto err_desc_get;
 
-		write_desc_sar(desc, src_adr);
-		write_desc_dar(desc, dst_adr);
-		desc->lli.block_ts_lo = cpu_to_le32(block_ts - 1);
+		write_desc_sar(hw_desc, src_adr);
+		write_desc_dar(hw_desc, dst_adr);
+		hw_desc->lli->block_ts_lo = cpu_to_le32(block_ts - 1);
 
 		reg = CH_CTL_H_LLI_VALID;
 		if (chan->chip->dw->hdata->restrict_axi_burst_len) {
@@ -474,7 +501,7 @@ dma_chan_prep_dma_memcpy(struct dma_chan *dchan, dma_addr_t dst_adr,
 				CH_CTL_H_AWLEN_EN |
 				burst_len << CH_CTL_H_AWLEN_POS);
 		}
-		desc->lli.ctl_hi = cpu_to_le32(reg);
+		hw_desc->lli->ctl_hi = cpu_to_le32(reg);
 
 		reg = (DWAXIDMAC_BURST_TRANS_LEN_4 << CH_CTL_L_DST_MSIZE_POS |
 		       DWAXIDMAC_BURST_TRANS_LEN_4 << CH_CTL_L_SRC_MSIZE_POS |
@@ -482,62 +509,61 @@ dma_chan_prep_dma_memcpy(struct dma_chan *dchan, dma_addr_t dst_adr,
 		       xfer_width << CH_CTL_L_SRC_WIDTH_POS |
 		       DWAXIDMAC_CH_CTL_L_INC << CH_CTL_L_DST_INC_POS |
 		       DWAXIDMAC_CH_CTL_L_INC << CH_CTL_L_SRC_INC_POS);
-		desc->lli.ctl_lo = cpu_to_le32(reg);
+		hw_desc->lli->ctl_lo = cpu_to_le32(reg);
 
-		set_desc_src_master(desc);
-		set_desc_dest_master(desc);
+		set_desc_src_master(hw_desc);
+		set_desc_dest_master(hw_desc, desc);
 
-		/* Manage transfer list (xfer_list) */
-		if (!first) {
-			first = desc;
-		} else {
-			list_add_tail(&desc->xfer_list, &first->xfer_list);
-			write_desc_llp(prev, desc->vd.tx.phys | lms);
-		}
-		prev = desc;
 
 		/* update the length and addresses for the next loop cycle */
 		len -= xfer_len;
 		dst_adr += xfer_len;
 		src_adr += xfer_len;
+		num++;
 	}
 
 	/* Total len of src/dest sg == 0, so no descriptor were allocated */
-	if (unlikely(!first))
+	if (unlikely(!desc))
 		return NULL;
 
 	/* Set end-of-link to the last link descriptor of list */
-	set_desc_last(desc);
+	set_desc_last(&desc->hw_desc[num - 1]);
+	/* Managed transfer list */
+	do {
+		hw_desc = &desc->hw_desc[--num];
+		write_desc_llp(hw_desc, llp | lms);
+		llp = hw_desc->llp;
+	} while (num);
 
-	return vchan_tx_prep(&chan->vc, &first->vd, flags);
+	return vchan_tx_prep(&chan->vc, &desc->vd, flags);
 
 err_desc_get:
-	if (first)
-		axi_desc_put(first);
+	if (desc)
+		axi_desc_put(desc);
 	return NULL;
 }
 
 static void axi_chan_dump_lli(struct axi_dma_chan *chan,
-			      struct axi_dma_desc *desc)
+			      struct axi_dma_hw_desc *desc)
 {
 	dev_err(dchan2dev(&chan->vc.chan),
 		"SAR: 0x%llx DAR: 0x%llx LLP: 0x%llx BTS 0x%x CTL: 0x%x:%08x",
-		le64_to_cpu(desc->lli.sar),
-		le64_to_cpu(desc->lli.dar),
-		le64_to_cpu(desc->lli.llp),
-		le32_to_cpu(desc->lli.block_ts_lo),
-		le32_to_cpu(desc->lli.ctl_hi),
-		le32_to_cpu(desc->lli.ctl_lo));
+		le64_to_cpu(desc->lli->sar),
+		le64_to_cpu(desc->lli->dar),
+		le64_to_cpu(desc->lli->llp),
+		le32_to_cpu(desc->lli->block_ts_lo),
+		le32_to_cpu(desc->lli->ctl_hi),
+		le32_to_cpu(desc->lli->ctl_lo));
 }
 
 static void axi_chan_list_dump_lli(struct axi_dma_chan *chan,
 				   struct axi_dma_desc *desc_head)
 {
-	struct axi_dma_desc *desc;
+	int count = atomic_read(&chan->descs_allocated);
+	int i;
 
-	axi_chan_dump_lli(chan, desc_head);
-	list_for_each_entry(desc, &desc_head->xfer_list, xfer_list)
-		axi_chan_dump_lli(chan, desc);
+	for (i = 0; i < count; i++)
+		axi_chan_dump_lli(chan, &desc_head->hw_desc[i]);
 }
 
 static noinline void axi_chan_handle_err(struct axi_dma_chan *chan, u32 status)
@@ -872,7 +898,7 @@ static int dw_probe(struct platform_device *pdev)
 
 	/* Lli address must be aligned to a 64-byte boundary */
 	dw->desc_pool = dmam_pool_create(KBUILD_MODNAME, chip->dev,
-					 sizeof(struct axi_dma_desc), 64, 0);
+					 sizeof(struct axi_dma_lli), 64, 0);
 	if (!dw->desc_pool) {
 		dev_err(chip->dev, "No memory for descriptors dma pool\n");
 		return -ENOMEM;
diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
index 18b6014cf9b4..41e775e6e593 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
@@ -41,6 +41,7 @@ struct axi_dma_chan {
 
 	struct virt_dma_chan		vc;
 
+	struct axi_dma_desc		*desc;
 	/* these other elements are all protected by vc.lock */
 	bool				is_paused;
 };
@@ -80,12 +81,16 @@ struct __packed axi_dma_lli {
 	__le32		reserved_hi;
 };
 
+struct axi_dma_hw_desc {
+	struct axi_dma_lli	*lli;
+	dma_addr_t		llp;
+};
+
 struct axi_dma_desc {
-	struct axi_dma_lli		lli;
+	struct axi_dma_hw_desc	*hw_desc;
 
 	struct virt_dma_desc		vd;
 	struct axi_dma_chan		*chan;
-	struct list_head		xfer_list;
 };
 
 static inline struct device *dchan2dev(struct dma_chan *dchan)
-- 
2.18.0

[PATCH 03/15] dmaengine: dw-axi-dmac: move dma_pool_create() to alloc_chan_resources()

[Sia Jee Heng]

The DMA memory block is created at driver load time and exist for
device lifetime. Move the dma_pool_create() to the ->chan_resource()
callback function allowing the DMA memory blocks to be created as needed
and destroyed when the channel is freed.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
---
 .../dma/dw-axi-dmac/dw-axi-dmac-platform.c    | 24 ++++++++++---------
 drivers/dma/dw-axi-dmac/dw-axi-dmac.h         |  2 +-
 2 files changed, 14 insertions(+), 12 deletions(-)

diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
index 8cfd645479e1..46e2ba978e20 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
@@ -216,11 +216,10 @@ static struct axi_dma_desc *axi_desc_alloc(u32 num)
 static struct axi_dma_lli *axi_desc_get(struct axi_dma_chan *chan,
 					dma_addr_t *addr)
 {
-	struct dw_axi_dma *dw = chan->chip->dw;
 	struct axi_dma_lli *lli;
 	dma_addr_t phys;
 
-	lli = dma_pool_zalloc(dw->desc_pool, GFP_NOWAIT, &phys);
+	lli = dma_pool_zalloc(chan->desc_pool, GFP_NOWAIT, &phys);
 	if (unlikely(!lli)) {
 		dev_err(chan2dev(chan), "%s: not enough descriptors available\n",
 			axi_chan_name(chan));
@@ -236,14 +235,13 @@ static struct axi_dma_lli *axi_desc_get(struct axi_dma_chan *chan,
 static void axi_desc_put(struct axi_dma_desc *desc)
 {
 	struct axi_dma_chan *chan = desc->chan;
-	struct dw_axi_dma *dw = chan->chip->dw;
 	int count = atomic_read(&chan->descs_allocated);
 	struct axi_dma_hw_desc *hw_desc;
 	int descs_put;
 
 	for (descs_put = 0; descs_put < count; descs_put++) {
 		hw_desc = &desc->hw_desc[descs_put];
-		dma_pool_free(dw->desc_pool, hw_desc->lli, hw_desc->llp);
+		dma_pool_free(chan->desc_pool, hw_desc->lli, hw_desc->llp);
 	}
 
 	kfree(desc->hw_desc);
@@ -360,6 +358,15 @@ static int dma_chan_alloc_chan_resources(struct dma_chan *dchan)
 		return -EBUSY;
 	}
 
+	/* LLI address must be aligned to a 64-byte boundary */
+	chan->desc_pool = dma_pool_create(dev_name(chan2dev(chan)),
+					  chan->chip->dev,
+					  sizeof(struct axi_dma_lli),
+					  64, 0);
+	if (!chan->desc_pool) {
+		dev_err(chan2dev(chan), "No memory for descriptors\n");
+		return -ENOMEM;
+	}
 	dev_vdbg(dchan2dev(dchan), "%s: allocating\n", axi_chan_name(chan));
 
 	pm_runtime_get(chan->chip->dev);
@@ -381,6 +388,8 @@ static void dma_chan_free_chan_resources(struct dma_chan *dchan)
 
 	vchan_free_chan_resources(&chan->vc);
 
+	dma_pool_destroy(chan->desc_pool);
+	chan->desc_pool = NULL;
 	dev_vdbg(dchan2dev(dchan),
 		 "%s: free resources, descriptor still allocated: %u\n",
 		 axi_chan_name(chan), atomic_read(&chan->descs_allocated));
@@ -896,13 +905,6 @@ static int dw_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	/* Lli address must be aligned to a 64-byte boundary */
-	dw->desc_pool = dmam_pool_create(KBUILD_MODNAME, chip->dev,
-					 sizeof(struct axi_dma_lli), 64, 0);
-	if (!dw->desc_pool) {
-		dev_err(chip->dev, "No memory for descriptors dma pool\n");
-		return -ENOMEM;
-	}
 
 	INIT_LIST_HEAD(&dw->dma.channels);
 	for (i = 0; i < hdata->nr_channels; i++) {
diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
index 41e775e6e593..f886b2bb75de 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
@@ -39,6 +39,7 @@ struct axi_dma_chan {
 	u8				id;
 	atomic_t			descs_allocated;
 
+	struct dma_pool			*desc_pool;
 	struct virt_dma_chan		vc;
 
 	struct axi_dma_desc		*desc;
@@ -49,7 +50,6 @@ struct axi_dma_chan {
 struct dw_axi_dma {
 	struct dma_device	dma;
 	struct dw_axi_dma_hcfg	*hdata;
-	struct dma_pool		*desc_pool;
 
 	/* channels */
 	struct axi_dma_chan	*chan;
-- 
2.18.0

[PATCH 04/15] dmaengine: dw-axi-dmac: Add device_synchronize() callback

[Sia Jee Heng]

Add support for device_synchronize() callback function to sync with
dmaengine_terminate_sync().

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
---
 drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
index 46e2ba978e20..56b213211341 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
@@ -347,6 +347,13 @@ static void dma_chan_issue_pending(struct dma_chan *dchan)
 	spin_unlock_irqrestore(&chan->vc.lock, flags);
 }
 
+static void dw_axi_dma_synchronize(struct dma_chan *dchan)
+{
+	struct axi_dma_chan *chan = dchan_to_axi_dma_chan(dchan);
+
+	vchan_synchronize(&chan->vc);
+}
+
 static int dma_chan_alloc_chan_resources(struct dma_chan *dchan)
 {
 	struct axi_dma_chan *chan = dchan_to_axi_dma_chan(dchan);
@@ -940,6 +947,7 @@ static int dw_probe(struct platform_device *pdev)
 	dw->dma.device_free_chan_resources = dma_chan_free_chan_resources;
 
 	dw->dma.device_prep_dma_memcpy = dma_chan_prep_dma_memcpy;
+	dw->dma.device_synchronize = dw_axi_dma_synchronize;
 
 	platform_set_drvdata(pdev, chip);
 
-- 
2.18.0

[PATCH 05/15] dmaengine: dw-axi-dmac: Add device_config operation

[Sia Jee Heng]

Add device_config() callback function so that the device address
can be passed to the dma driver.

DMA clients use this interface to pass in the device address to the
AxiDMA. Without this interface, data transfer between device to memory
and memory to device would failed.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
---
 drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c | 11 +++++++++++
 drivers/dma/dw-axi-dmac/dw-axi-dmac.h          |  1 +
 2 files changed, 12 insertions(+)

diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
index 56b213211341..16e6934ae9a1 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
@@ -559,6 +559,16 @@ dma_chan_prep_dma_memcpy(struct dma_chan *dchan, dma_addr_t dst_adr,
 	return NULL;
 }
 
+static int dw_axi_dma_chan_slave_config(struct dma_chan *dchan,
+					struct dma_slave_config *config)
+{
+	struct axi_dma_chan *chan = dchan_to_axi_dma_chan(dchan);
+
+	memcpy(&chan->config, config, sizeof(*config));
+
+	return 0;
+}
+
 static void axi_chan_dump_lli(struct axi_dma_chan *chan,
 			      struct axi_dma_hw_desc *desc)
 {
@@ -948,6 +958,7 @@ static int dw_probe(struct platform_device *pdev)
 
 	dw->dma.device_prep_dma_memcpy = dma_chan_prep_dma_memcpy;
 	dw->dma.device_synchronize = dw_axi_dma_synchronize;
+	dw->dma.device_config = dw_axi_dma_chan_slave_config;
 
 	platform_set_drvdata(pdev, chip);
 
diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
index f886b2bb75de..a75b921d6b1a 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
@@ -43,6 +43,7 @@ struct axi_dma_chan {
 	struct virt_dma_chan		vc;
 
 	struct axi_dma_desc		*desc;
+	struct dma_slave_config		config;
 	/* these other elements are all protected by vc.lock */
 	bool				is_paused;
 };
-- 
2.18.0

[PATCH 06/15] dmaengine: dw-axi-dmac: Support device_prep_slave_sg

[Sia Jee Heng]

Add device_prep_slave_sg() callback function so that DMA_MEM_TO_DEV
and DMA_DEV_TO_MEM operations in single mode can be supported.

Existing AxiDMA driver only support data transfer between
memory to memory. Data transfer between device to memory and
memory to device in single mode would failed if this interface
is not supported by the AxiDMA driver.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
---
 .../dma/dw-axi-dmac/dw-axi-dmac-platform.c    | 142 ++++++++++++++++++
 drivers/dma/dw-axi-dmac/dw-axi-dmac.h         |   1 +
 2 files changed, 143 insertions(+)

diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
index 16e6934ae9a1..1124c97025f2 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
@@ -307,6 +307,22 @@ static void axi_chan_block_xfer_start(struct axi_dma_chan *chan,
 	       priority << CH_CFG_H_PRIORITY_POS |
 	       DWAXIDMAC_HS_SEL_HW << CH_CFG_H_HS_SEL_DST_POS |
 	       DWAXIDMAC_HS_SEL_HW << CH_CFG_H_HS_SEL_SRC_POS);
+	switch (chan->direction) {
+	case DMA_MEM_TO_DEV:
+		reg |= (chan->config.device_fc ?
+			DWAXIDMAC_TT_FC_MEM_TO_PER_DST :
+			DWAXIDMAC_TT_FC_MEM_TO_PER_DMAC)
+			<< CH_CFG_H_TT_FC_POS;
+		break;
+	case DMA_DEV_TO_MEM:
+		reg |= (chan->config.device_fc ?
+			DWAXIDMAC_TT_FC_PER_TO_MEM_SRC :
+			DWAXIDMAC_TT_FC_PER_TO_MEM_DMAC)
+			<< CH_CFG_H_TT_FC_POS;
+		break;
+	default:
+		break;
+	}
 	axi_chan_iowrite32(chan, CH_CFG_H, reg);
 
 	write_chan_llp(chan, first->hw_desc[0].llp | lms);
@@ -559,6 +575,129 @@ dma_chan_prep_dma_memcpy(struct dma_chan *dchan, dma_addr_t dst_adr,
 	return NULL;
 }
 
+static struct dma_async_tx_descriptor *
+dw_axi_dma_chan_prep_slave_sg(struct dma_chan *dchan, struct scatterlist *sgl,
+			      unsigned int sg_len,
+			      enum dma_transfer_direction direction,
+			      unsigned long flags, void *context)
+{
+	struct axi_dma_chan *chan = dchan_to_axi_dma_chan(dchan);
+	unsigned int data_width = BIT(chan->chip->dw->hdata->m_data_width);
+	struct axi_dma_hw_desc *hw_desc = NULL;
+	struct axi_dma_desc *desc = NULL;
+	struct scatterlist *sg;
+	unsigned int reg_width;
+	unsigned int mem_width;
+	dma_addr_t reg;
+	unsigned int i;
+	u32 ctllo, ctlhi;
+	size_t block_ts;
+	u32 mem, len;
+	u64 llp = 0;
+	u8 lms = 0; /* Select AXI0 master for LLI fetching */
+
+	if (unlikely(!is_slave_direction(direction) || !sg_len))
+		return NULL;
+
+	chan->direction = direction;
+
+	desc = axi_desc_alloc(sg_len);
+	if (unlikely(!desc))
+		goto err_desc_get;
+
+	switch (direction) {
+	case DMA_MEM_TO_DEV:
+		reg_width = __ffs(chan->config.dst_addr_width);
+		reg = chan->config.dst_addr;
+		ctllo = reg_width << CH_CTL_L_DST_WIDTH_POS |
+			DWAXIDMAC_CH_CTL_L_NOINC << CH_CTL_L_DST_INC_POS |
+			DWAXIDMAC_CH_CTL_L_INC << CH_CTL_L_SRC_INC_POS;
+		break;
+	case DMA_DEV_TO_MEM:
+		reg_width = __ffs(chan->config.src_addr_width);
+		reg = chan->config.src_addr;
+		ctllo = reg_width << CH_CTL_L_SRC_WIDTH_POS |
+			DWAXIDMAC_CH_CTL_L_INC << CH_CTL_L_DST_INC_POS |
+			DWAXIDMAC_CH_CTL_L_NOINC << CH_CTL_L_SRC_INC_POS;
+		break;
+	default:
+		return NULL;
+	}
+
+	desc->chan = chan;
+
+	for_each_sg(sgl, sg, sg_len, i) {
+		mem = sg_dma_address(sg);
+		len = sg_dma_len(sg);
+		hw_desc = &desc->hw_desc[i];
+		mem_width = __ffs(data_width | mem | len);
+		if (mem_width > DWAXIDMAC_TRANS_WIDTH_32)
+			mem_width = DWAXIDMAC_TRANS_WIDTH_32;
+
+		hw_desc->lli = axi_desc_get(chan, &hw_desc->llp);
+		if (unlikely(!hw_desc->lli))
+			goto err_desc_get;
+
+		if (direction == DMA_MEM_TO_DEV)
+			block_ts = len >> mem_width;
+		else
+			block_ts = len >> reg_width;
+
+		ctlhi = CH_CTL_H_LLI_VALID;
+		if (chan->chip->dw->hdata->restrict_axi_burst_len) {
+			u32 burst_len = chan->chip->dw->hdata->axi_rw_burst_len;
+
+			ctlhi |= (CH_CTL_H_ARLEN_EN |
+				burst_len << CH_CTL_H_ARLEN_POS |
+				CH_CTL_H_AWLEN_EN |
+				burst_len << CH_CTL_H_AWLEN_POS);
+		}
+
+		hw_desc->lli->ctl_hi = cpu_to_le32(ctlhi);
+
+		if (direction == DMA_MEM_TO_DEV)
+			ctllo |= mem_width << CH_CTL_L_SRC_WIDTH_POS;
+		else
+			ctllo |= mem_width << CH_CTL_L_DST_WIDTH_POS;
+
+		if (direction == DMA_MEM_TO_DEV) {
+			write_desc_sar(hw_desc, mem);
+			write_desc_dar(hw_desc, reg);
+		} else {
+			write_desc_sar(hw_desc, reg);
+			write_desc_dar(hw_desc, mem);
+		}
+
+		hw_desc->lli->block_ts_lo = cpu_to_le32(block_ts - 1);
+		ctllo |= (DWAXIDMAC_BURST_TRANS_LEN_4 << CH_CTL_L_DST_MSIZE_POS |
+				 DWAXIDMAC_BURST_TRANS_LEN_4 << CH_CTL_L_SRC_MSIZE_POS);
+		hw_desc->lli->ctl_lo = cpu_to_le32(ctllo);
+
+		set_desc_src_master(hw_desc);
+	}
+
+	if (unlikely(!desc))
+		return NULL;
+
+	/* Set end-of-link to the last link descriptor of list */
+	set_desc_last(&desc->hw_desc[sg_len - 1]);
+
+	/* Managed transfer list */
+	do {
+		hw_desc = &desc->hw_desc[--sg_len];
+		write_desc_llp(hw_desc, llp | lms);
+		llp = hw_desc->llp;
+	} while (sg_len);
+
+	return vchan_tx_prep(&chan->vc, &desc->vd, flags);
+
+err_desc_get:
+	if (desc)
+		axi_desc_put(desc);
+
+	return NULL;
+}
+
 static int dw_axi_dma_chan_slave_config(struct dma_chan *dchan,
 					struct dma_slave_config *config)
 {
@@ -938,12 +1077,14 @@ static int dw_probe(struct platform_device *pdev)
 
 	/* Set capabilities */
 	dma_cap_set(DMA_MEMCPY, dw->dma.cap_mask);
+	dma_cap_set(DMA_SLAVE, dw->dma.cap_mask);
 
 	/* DMA capabilities */
 	dw->dma.chancnt = hdata->nr_channels;
 	dw->dma.src_addr_widths = AXI_DMA_BUSWIDTHS;
 	dw->dma.dst_addr_widths = AXI_DMA_BUSWIDTHS;
 	dw->dma.directions = BIT(DMA_MEM_TO_MEM);
+	dw->dma.directions |= BIT(DMA_MEM_TO_DEV) | BIT(DMA_DEV_TO_MEM);
 	dw->dma.residue_granularity = DMA_RESIDUE_GRANULARITY_DESCRIPTOR;
 
 	dw->dma.dev = chip->dev;
@@ -959,6 +1100,7 @@ static int dw_probe(struct platform_device *pdev)
 	dw->dma.device_prep_dma_memcpy = dma_chan_prep_dma_memcpy;
 	dw->dma.device_synchronize = dw_axi_dma_synchronize;
 	dw->dma.device_config = dw_axi_dma_chan_slave_config;
+	dw->dma.device_prep_slave_sg = dw_axi_dma_chan_prep_slave_sg;
 
 	platform_set_drvdata(pdev, chip);
 
diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
index a75b921d6b1a..ac49f2e14b0c 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
@@ -44,6 +44,7 @@ struct axi_dma_chan {
 
 	struct axi_dma_desc		*desc;
 	struct dma_slave_config		config;
+	enum dma_transfer_direction	direction;
 	/* these other elements are all protected by vc.lock */
 	bool				is_paused;
 };
-- 
2.18.0

[PATCH 07/15] dmaegine: dw-axi-dmac: Support device_prep_dma_cyclic()

[Sia Jee Heng]

Add support for device_prep_dma_cyclic() callback function to benefit
DMA cyclic client, for example ALSA.

Existing AxiDMA driver only support data transfer between memory to memory.
Data transfer between device to memory and memory to device in cyclic mode
would failed if this interface is not supported by the AxiDMA driver.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
---
 .../dma/dw-axi-dmac/dw-axi-dmac-platform.c    | 182 +++++++++++++++++-
 drivers/dma/dw-axi-dmac/dw-axi-dmac.h         |   2 +
 2 files changed, 177 insertions(+), 7 deletions(-)

diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
index 1124c97025f2..9e574753aaf0 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
@@ -15,6 +15,8 @@
 #include <linux/err.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
@@ -575,6 +577,135 @@ dma_chan_prep_dma_memcpy(struct dma_chan *dchan, dma_addr_t dst_adr,
 	return NULL;
 }
 
+static struct dma_async_tx_descriptor *
+dw_axi_dma_chan_prep_cyclic(struct dma_chan *dchan, dma_addr_t dma_addr,
+			    size_t buf_len, size_t period_len,
+			    enum dma_transfer_direction direction,
+			    unsigned long flags)
+{
+	struct axi_dma_chan *chan = dchan_to_axi_dma_chan(dchan);
+	u32 data_width = BIT(chan->chip->dw->hdata->m_data_width);
+	struct axi_dma_hw_desc *hw_desc = NULL;
+	struct axi_dma_desc *desc = NULL;
+	dma_addr_t src_addr = dma_addr;
+	u32 num_periods = buf_len / period_len;
+	unsigned int reg_width;
+	unsigned int mem_width;
+	dma_addr_t reg;
+	unsigned int i;
+	u32 ctllo, ctlhi;
+	size_t block_ts;
+	u64 llp = 0;
+	u8 lms = 0; /* Select AXI0 master for LLI fetching */
+
+	block_ts = chan->chip->dw->hdata->block_size[chan->id];
+
+	mem_width = __ffs(data_width | dma_addr | period_len);
+	if (mem_width > DWAXIDMAC_TRANS_WIDTH_32)
+		mem_width = DWAXIDMAC_TRANS_WIDTH_32;
+
+	desc = axi_desc_alloc(num_periods);
+	if (unlikely(!desc))
+		goto err_desc_get;
+
+	chan->direction = direction;
+	desc->chan = chan;
+	chan->cyclic = true;
+
+	switch (direction) {
+	case DMA_MEM_TO_DEV:
+		reg_width = __ffs(chan->config.dst_addr_width);
+		reg = chan->config.dst_addr;
+		ctllo = reg_width << CH_CTL_L_DST_WIDTH_POS |
+			DWAXIDMAC_CH_CTL_L_NOINC << CH_CTL_L_DST_INC_POS |
+			DWAXIDMAC_CH_CTL_L_INC << CH_CTL_L_SRC_INC_POS;
+		break;
+	case DMA_DEV_TO_MEM:
+		reg_width = __ffs(chan->config.src_addr_width);
+		reg = chan->config.src_addr;
+		ctllo = reg_width << CH_CTL_L_SRC_WIDTH_POS |
+			DWAXIDMAC_CH_CTL_L_INC << CH_CTL_L_DST_INC_POS |
+			DWAXIDMAC_CH_CTL_L_NOINC << CH_CTL_L_SRC_INC_POS;
+		break;
+	default:
+		return NULL;
+	}
+
+	for (i = 0; i < num_periods; i++) {
+		hw_desc = &desc->hw_desc[i];
+
+		hw_desc->lli = axi_desc_get(chan, &hw_desc->llp);
+		if (unlikely(!hw_desc->lli))
+			goto err_desc_get;
+
+		if (direction == DMA_MEM_TO_DEV)
+			block_ts = period_len >> mem_width;
+		else
+			block_ts = period_len >> reg_width;
+
+		ctlhi = CH_CTL_H_LLI_VALID;
+		if (chan->chip->dw->hdata->restrict_axi_burst_len) {
+			u32 burst_len = chan->chip->dw->hdata->axi_rw_burst_len;
+
+			ctlhi |= (CH_CTL_H_ARLEN_EN |
+				burst_len << CH_CTL_H_ARLEN_POS |
+				CH_CTL_H_AWLEN_EN |
+				burst_len << CH_CTL_H_AWLEN_POS);
+		}
+
+		hw_desc->lli->ctl_hi = cpu_to_le32(ctlhi);
+
+		if (direction == DMA_MEM_TO_DEV)
+			ctllo |= mem_width << CH_CTL_L_SRC_WIDTH_POS;
+		else
+			ctllo |= mem_width << CH_CTL_L_DST_WIDTH_POS;
+
+		if (direction == DMA_MEM_TO_DEV) {
+			write_desc_sar(hw_desc, src_addr);
+			write_desc_dar(hw_desc, reg);
+		} else {
+			write_desc_sar(hw_desc, reg);
+			write_desc_dar(hw_desc, src_addr);
+		}
+
+		hw_desc->lli->block_ts_lo = cpu_to_le32(block_ts - 1);
+
+		ctllo |= (DWAXIDMAC_BURST_TRANS_LEN_4 << CH_CTL_L_DST_MSIZE_POS |
+			  DWAXIDMAC_BURST_TRANS_LEN_4 << CH_CTL_L_SRC_MSIZE_POS);
+		hw_desc->lli->ctl_lo = cpu_to_le32(ctllo);
+
+		set_desc_src_master(hw_desc);
+
+		/*
+		 * Set end-of-link to the linked descriptor, so that cyclic
+		 * callback function can be triggered during interrupt.
+		 */
+		set_desc_last(hw_desc);
+
+		src_addr += period_len;
+	}
+
+	if (unlikely(!desc))
+		return NULL;
+
+	llp = desc->hw_desc[0].llp;
+
+	/* Managed transfer list */
+	do {
+		hw_desc = &desc->hw_desc[--num_periods];
+		write_desc_llp(hw_desc, llp | lms);
+		llp = hw_desc->llp;
+	} while (num_periods);
+
+	return vchan_tx_prep(&chan->vc, &desc->vd, flags);
+
+err_desc_get:
+	if (desc)
+		axi_desc_put(desc);
+
+	return NULL;
+}
+
 static struct dma_async_tx_descriptor *
 dw_axi_dma_chan_prep_slave_sg(struct dma_chan *dchan, struct scatterlist *sgl,
 			      unsigned int sg_len,
@@ -761,8 +892,13 @@ static noinline void axi_chan_handle_err(struct axi_dma_chan *chan, u32 status)
 
 static void axi_chan_block_xfer_complete(struct axi_dma_chan *chan)
 {
+	int count = atomic_read(&chan->descs_allocated);
+	struct axi_dma_hw_desc *hw_desc;
+	struct axi_dma_desc *desc;
 	struct virt_dma_desc *vd;
 	unsigned long flags;
+	u64 llp;
+	int i;
 
 	spin_lock_irqsave(&chan->vc.lock, flags);
 	if (unlikely(axi_chan_is_hw_enable(chan))) {
@@ -773,12 +909,32 @@ static void axi_chan_block_xfer_complete(struct axi_dma_chan *chan)
 
 	/* The completed descriptor currently is in the head of vc list */
 	vd = vchan_next_desc(&chan->vc);
-	/* Remove the completed descriptor from issued list before completing */
-	list_del(&vd->node);
-	vchan_cookie_complete(vd);
 
-	/* Submit queued descriptors after processing the completed ones */
-	axi_chan_start_first_queued(chan);
+	if (chan->cyclic) {
+		vchan_cyclic_callback(vd);
+		desc = vd_to_axi_desc(vd);
+		if (desc) {
+			llp = lo_hi_readq(chan->chan_regs + CH_LLP);
+			for (i = 0; i < count; i++) {
+				hw_desc = &desc->hw_desc[i];
+				if (hw_desc->llp == llp) {
+					axi_chan_irq_clear(chan, hw_desc->lli->status_lo);
+					hw_desc->lli->ctl_hi |= CH_CTL_H_LLI_VALID;
+					desc->completed_blocks = i;
+					break;
+				}
+			}
+
+			axi_chan_enable(chan);
+		}
+	} else {
+		/* Remove the completed descriptor from issued list before completing */
+		list_del(&vd->node);
+		vchan_cookie_complete(vd);
+
+		/* Submit queued descriptors after processing the completed ones */
+		axi_chan_start_first_queued(chan);
+	}
 
 	spin_unlock_irqrestore(&chan->vc.lock, flags);
 }
@@ -818,15 +974,25 @@ static irqreturn_t dw_axi_dma_interrupt(int irq, void *dev_id)
 static int dma_chan_terminate_all(struct dma_chan *dchan)
 {
 	struct axi_dma_chan *chan = dchan_to_axi_dma_chan(dchan);
+	u32 chan_active = BIT(chan->id) << DMAC_CHAN_EN_SHIFT;
 	unsigned long flags;
+	u32 val;
+	int ret;
 	LIST_HEAD(head);
 
-	spin_lock_irqsave(&chan->vc.lock, flags);
-
 	axi_chan_disable(chan);
 
+	ret = readl_poll_timeout_atomic(chan->chip->regs + DMAC_CHEN, val,
+					!(val & chan_active), 1000, 10000);
+	if (ret == -ETIMEDOUT)
+		dev_warn(dchan2dev(dchan),
+			 "%s failed to stop\n", axi_chan_name(chan));
+
+	spin_lock_irqsave(&chan->vc.lock, flags);
+
 	vchan_get_all_descriptors(&chan->vc, &head);
 
+	chan->cyclic = false;
 	spin_unlock_irqrestore(&chan->vc.lock, flags);
 
 	vchan_dma_desc_free_list(&chan->vc, &head);
@@ -1078,6 +1244,7 @@ static int dw_probe(struct platform_device *pdev)
 	/* Set capabilities */
 	dma_cap_set(DMA_MEMCPY, dw->dma.cap_mask);
 	dma_cap_set(DMA_SLAVE, dw->dma.cap_mask);
+	dma_cap_set(DMA_CYCLIC, dw->dma.cap_mask);
 
 	/* DMA capabilities */
 	dw->dma.chancnt = hdata->nr_channels;
@@ -1101,6 +1268,7 @@ static int dw_probe(struct platform_device *pdev)
 	dw->dma.device_synchronize = dw_axi_dma_synchronize;
 	dw->dma.device_config = dw_axi_dma_chan_slave_config;
 	dw->dma.device_prep_slave_sg = dw_axi_dma_chan_prep_slave_sg;
+	dw->dma.device_prep_dma_cyclic = dw_axi_dma_chan_prep_cyclic;
 
 	platform_set_drvdata(pdev, chip);
 
diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
index ac49f2e14b0c..a26b0a242a93 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
@@ -45,6 +45,7 @@ struct axi_dma_chan {
 	struct axi_dma_desc		*desc;
 	struct dma_slave_config		config;
 	enum dma_transfer_direction	direction;
+	bool				cyclic;
 	/* these other elements are all protected by vc.lock */
 	bool				is_paused;
 };
@@ -93,6 +94,7 @@ struct axi_dma_desc {
 
 	struct virt_dma_desc		vd;
 	struct axi_dma_chan		*chan;
+	u32				completed_blocks;
 };
 
 static inline struct device *dchan2dev(struct dma_chan *dchan)
-- 
2.18.0

[PATCH 08/15] dmaengine: dw-axi-dmac: Support of_dma_controller_register()

[Sia Jee Heng]

Add support for of_dma_controller_register() so that DMA clients
can pass in device handshake number to the AxiDMA driver.

DMA clients shall code the device handshake number in the Device tree.
When DMA activities are needed, DMA clients shall invoke OF helper
function to pass in the device handshake number to the AxiDMA.

Without register to the of_dma_controller_register(), data transfer
between memory to device and device to memory operations would failed.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
---
 .../dma/dw-axi-dmac/dw-axi-dmac-platform.c    | 26 +++++++++++++++++++
 drivers/dma/dw-axi-dmac/dw-axi-dmac.h         |  1 +
 2 files changed, 27 insertions(+)

diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
index 9e574753aaf0..011cf7134f25 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
@@ -20,6 +20,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_dma.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/property.h>
@@ -1103,6 +1104,22 @@ static int __maybe_unused axi_dma_runtime_resume(struct device *dev)
 	return axi_dma_resume(chip);
 }
 
+static struct dma_chan *dw_axi_dma_of_xlate(struct of_phandle_args *dma_spec,
+					    struct of_dma *ofdma)
+{
+	struct dw_axi_dma *dw = ofdma->of_dma_data;
+	struct axi_dma_chan *chan;
+	struct dma_chan *dchan;
+
+	dchan = dma_get_any_slave_channel(&dw->dma);
+	if (!dchan)
+		return NULL;
+
+	chan = dchan_to_axi_dma_chan(dchan);
+	chan->hw_hs_num = dma_spec->args[0];
+	return dchan;
+}
+
 static int parse_device_properties(struct axi_dma_chip *chip)
 {
 	struct device *dev = chip->dev;
@@ -1292,6 +1309,13 @@ static int dw_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_pm_disable;
 
+	/* Register with OF helpers for DMA lookups */
+	ret = of_dma_controller_register(pdev->dev.of_node,
+					 dw_axi_dma_of_xlate, dw);
+	if (ret < 0)
+		dev_warn(&pdev->dev,
+			 "Failed to register OF DMA controller, fallback to MEM_TO_MEM mode\n");
+
 	dev_info(chip->dev, "DesignWare AXI DMA Controller, %d channels\n",
 		 dw->hdata->nr_channels);
 
@@ -1325,6 +1349,8 @@ static int dw_remove(struct platform_device *pdev)
 
 	devm_free_irq(chip->dev, chip->irq, chip);
 
+	of_dma_controller_free(chip->dev->of_node);
+
 	list_for_each_entry_safe(chan, _chan, &dw->dma.channels,
 			vc.chan.device_node) {
 		list_del(&chan->vc.chan.device_node);
diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
index a26b0a242a93..651874e5c88f 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
@@ -37,6 +37,7 @@ struct axi_dma_chan {
 	struct axi_dma_chip		*chip;
 	void __iomem			*chan_regs;
 	u8				id;
+	u8				hw_hs_num;
 	atomic_t			descs_allocated;
 
 	struct dma_pool			*desc_pool;
-- 
2.18.0

[PATCH 09/15] dmaengine: dw-axi-dmac: Support burst residue granularity

[Sia Jee Heng]

Add support for DMA_RESIDUE_GRANULARITY_BURST so that AxiDMA can report
DMA residue.

Existing AxiDMA driver only support data transfer between
memory to memory operation, therefore reporting DMA residue
to the DMA clients is not supported.

Reporting DMA residue to the DMA clients is important as DMA clients
shall invoke dmaengine_tx_status() to understand the number of bytes
been transferred so that the buffer pointer can be updated accordingly.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
---
 .../dma/dw-axi-dmac/dw-axi-dmac-platform.c    | 44 ++++++++++++++++---
 drivers/dma/dw-axi-dmac/dw-axi-dmac.h         |  2 +
 2 files changed, 39 insertions(+), 7 deletions(-)

diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
index 011cf7134f25..cd99557a716c 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
@@ -265,14 +265,36 @@ dma_chan_tx_status(struct dma_chan *dchan, dma_cookie_t cookie,
 		  struct dma_tx_state *txstate)
 {
 	struct axi_dma_chan *chan = dchan_to_axi_dma_chan(dchan);
-	enum dma_status ret;
+	struct virt_dma_desc *vdesc;
+	enum dma_status status;
+	u32 completed_length;
+	unsigned long flags;
+	u32 completed_blocks;
+	size_t bytes = 0;
+	u32 length;
+	u32 len;
 
-	ret = dma_cookie_status(dchan, cookie, txstate);
+	status = dma_cookie_status(dchan, cookie, txstate);
+	if (status == DMA_COMPLETE)
+		return status;
 
-	if (chan->is_paused && ret == DMA_IN_PROGRESS)
-		ret = DMA_PAUSED;
+	spin_lock_irqsave(&chan->vc.lock, flags);
 
-	return ret;
+	vdesc = vchan_find_desc(&chan->vc, cookie);
+	if (vdesc) {
+		length = vd_to_axi_desc(vdesc)->length;
+		completed_blocks = vd_to_axi_desc(vdesc)->completed_blocks;
+		len = vd_to_axi_desc(vdesc)->hw_desc[0].len;
+		completed_length = completed_blocks * len;
+		bytes = length - completed_length;
+	} else {
+		bytes = vd_to_axi_desc(vdesc)->length;
+	}
+
+	spin_unlock_irqrestore(&chan->vc.lock, flags);
+	dma_set_residue(txstate, bytes);
+
+	return status;
 }
 
 static void write_desc_llp(struct axi_dma_hw_desc *desc, dma_addr_t adr)
@@ -497,6 +519,7 @@ dma_chan_prep_dma_memcpy(struct dma_chan *dchan, dma_addr_t dst_adr,
 
 	desc->chan = chan;
 	num = 0;
+	desc->length = 0;
 	while (len) {
 		xfer_len = len;
 
@@ -549,7 +572,8 @@ dma_chan_prep_dma_memcpy(struct dma_chan *dchan, dma_addr_t dst_adr,
 		set_desc_src_master(hw_desc);
 		set_desc_dest_master(hw_desc, desc);
 
-
+		hw_desc->len = xfer_len;
+		desc->length += hw_desc->len;
 		/* update the length and addresses for the next loop cycle */
 		len -= xfer_len;
 		dst_adr += xfer_len;
@@ -612,6 +636,7 @@ dw_axi_dma_chan_prep_cyclic(struct dma_chan *dchan, dma_addr_t dma_addr,
 	chan->direction = direction;
 	desc->chan = chan;
 	chan->cyclic = true;
+	desc->length = 0;
 
 	switch (direction) {
 	case DMA_MEM_TO_DEV:
@@ -677,6 +702,8 @@ dw_axi_dma_chan_prep_cyclic(struct dma_chan *dchan, dma_addr_t dma_addr,
 
 		set_desc_src_master(hw_desc);
 
+		hw_desc->len = period_len;
+		desc->length += hw_desc->len;
 		/*
 		 * Set end-of-link to the linked descriptor, so that cyclic
 		 * callback function can be triggered during interrupt.
@@ -757,6 +784,7 @@ dw_axi_dma_chan_prep_slave_sg(struct dma_chan *dchan, struct scatterlist *sgl,
 	}
 
 	desc->chan = chan;
+	desc->length = 0;
 
 	for_each_sg(sgl, sg, sg_len, i) {
 		mem = sg_dma_address(sg);
@@ -806,6 +834,8 @@ dw_axi_dma_chan_prep_slave_sg(struct dma_chan *dchan, struct scatterlist *sgl,
 		hw_desc->lli->ctl_lo = cpu_to_le32(ctllo);
 
 		set_desc_src_master(hw_desc);
+		hw_desc->len = len;
+		desc->length += hw_desc->len;
 	}
 
 	if (unlikely(!desc))
@@ -1269,7 +1299,7 @@ static int dw_probe(struct platform_device *pdev)
 	dw->dma.dst_addr_widths = AXI_DMA_BUSWIDTHS;
 	dw->dma.directions = BIT(DMA_MEM_TO_MEM);
 	dw->dma.directions |= BIT(DMA_MEM_TO_DEV) | BIT(DMA_DEV_TO_MEM);
-	dw->dma.residue_granularity = DMA_RESIDUE_GRANULARITY_DESCRIPTOR;
+	dw->dma.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
 
 	dw->dma.dev = chip->dev;
 	dw->dma.device_tx_status = dma_chan_tx_status;
diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
index 651874e5c88f..bdb66d775125 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
@@ -88,6 +88,7 @@ struct __packed axi_dma_lli {
 struct axi_dma_hw_desc {
 	struct axi_dma_lli	*lli;
 	dma_addr_t		llp;
+	u32			len;
 };
 
 struct axi_dma_desc {
@@ -96,6 +97,7 @@ struct axi_dma_desc {
 	struct virt_dma_desc		vd;
 	struct axi_dma_chan		*chan;
 	u32				completed_blocks;
+	u32				length;
 };
 
 static inline struct device *dchan2dev(struct dma_chan *dchan)
-- 
2.18.0

[PATCH 10/15] dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA support

[Sia Jee Heng]

Add support for Intel KeemBay AxiDMA to the .compatible field.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
---
 drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
index cd99557a716c..ce89b4dee1dc 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
@@ -1396,6 +1396,7 @@ static const struct dev_pm_ops dw_axi_dma_pm_ops = {
 
 static const struct of_device_id dw_dma_of_id_table[] = {
 	{ .compatible = "snps,axi-dma-1.01a" },
+	{ .compatible = "intel,kmb-axi-dma" },
 	{}
 };
 MODULE_DEVICE_TABLE(of, dw_dma_of_id_table);
-- 
2.18.0

[PATCH 11/15] dt-binding: dma: dw-axi-dmac: Add support for Intel KeemBay AxiDMA

[Sia Jee Heng]

Add support for Intel KeemBay AxiDMA to the dw-axi-dmac
Schemas DT binding.

Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
---
 .../bindings/dma/snps,dw-axi-dmac.yaml        | 25 +++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
index e688d25864bc..0e9bc5553a36 100644
--- a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
+++ b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
@@ -8,6 +8,7 @@ title: Synopsys DesignWare AXI DMA Controller
 
 maintainers:
   - Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com
+  - Sia, Jee Heng <jee.heng.sia@intel.com>
 
 description: |
  Synopsys DesignWare AXI DMA Controller DT Binding
@@ -16,6 +17,7 @@ properties:
   compatible:
     enum:
       - snps,axi-dma-1.01a
+      - intel,kmb-axi-dma
 
   reg:
     items:
@@ -24,6 +26,7 @@ properties:
   reg-names:
     items:
       - const: axidma_ctrl_regs
+      - const: axidma_apb_regs
 
   interrupts:
     maxItems: 1
@@ -122,3 +125,25 @@ examples:
          snps,priority = <0 1 2 3>;
          snps,axi-max-burst-len = <16>;
      };
+
+  - |
+     #include <dt-bindings/interrupt-controller/arm-gic.h>
+     #include <dt-bindings/interrupt-controller/irq.h>
+     /* example with intel,kmb-axi-dma */
+     #define KEEM_BAY_PSS_AXI_DMA
+     #define KEEM_BAY_PSS_APB_AXI_DMA
+     axi_dma: dma@28000000 {
+         compatible = "intel,kmb-axi-dma";
+         reg = <0x28000000 0x1000 0x20250000 0x24>;
+         reg-names = "axidma_ctrl_regs", "axidma_apb_regs";
+         interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+         clock-names = "core-clk", "cfgr-clk";
+         clocks = <&scmi_clk KEEM_BAY_PSS_AXI_DMA>, <&scmi_clk KEEM_BAY_PSS_APB_AXI_DMA>;
+         #dma-cells = <1>;
+         dma-channels = <8>;
+         snps,dma-masters = <1>;
+         snps,data-width = <4>;
+         snps,priority = <0 0 0 0 0 0 0 0>;
+         snps,block-size = <1024 1024 1024 1024 1024 1024 1024 1024>;
+         snps,axi-max-burst-len = <16>;
+     };
-- 
2.18.0

[PATCH 12/15] dmaengine: dw-axi-dmac: Add Intel KeemBay DMA register fields

[Sia Jee Heng]

Add support for Intel KeemBay DMA registers. These registers are required
to run data transfer between device to memory and memory to device on Intel
KeemBay SoC.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
---
 drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c |  4 ++++
 drivers/dma/dw-axi-dmac/dw-axi-dmac.h          | 14 ++++++++++++++
 2 files changed, 18 insertions(+)

diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
index ce89b4dee1dc..19806c586e81 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
@@ -1252,6 +1252,10 @@ static int dw_probe(struct platform_device *pdev)
 	if (IS_ERR(chip->regs))
 		return PTR_ERR(chip->regs);
 
+	chip->apb_regs = devm_platform_ioremap_resource(pdev, 1);
+	if (IS_ERR(chip->apb_regs))
+		dev_warn(&pdev->dev, "apb_regs not supported\n");
+
 	chip->core_clk = devm_clk_get(chip->dev, "core-clk");
 	if (IS_ERR(chip->core_clk))
 		return PTR_ERR(chip->core_clk);
diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
index bdb66d775125..f64e8d33b127 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
@@ -63,6 +63,7 @@ struct axi_dma_chip {
 	struct device		*dev;
 	int			irq;
 	void __iomem		*regs;
+	void __iomem		*apb_regs;
 	struct clk		*core_clk;
 	struct clk		*cfgr_clk;
 	struct dw_axi_dma	*dw;
@@ -169,6 +170,19 @@ static inline struct axi_dma_chan *dchan_to_axi_dma_chan(struct dma_chan *dchan)
 #define CH_INTSIGNAL_ENA	0x090 /* R/W Chan Interrupt Signal Enable */
 #define CH_INTCLEAR		0x098 /* W Chan Interrupt Clear */
 
+/* Apb slave registers */
+#define DMAC_APB_CFG		0x000 /* DMAC Apb Configuration Register */
+#define DMAC_APB_STAT		0x004 /* DMAC Apb Status Register */
+#define DMAC_APB_DEBUG_STAT_0	0x008 /* DMAC Apb Debug Status Register 0 */
+#define DMAC_APB_DEBUG_STAT_1	0x00C /* DMAC Apb Debug Status Register 1 */
+#define DMAC_APB_HW_HS_SEL_0	0x010 /* DMAC Apb HW HS register 0 */
+#define DMAC_APB_HW_HS_SEL_1	0x014 /* DMAC Apb HW HS register 1 */
+#define DMAC_APB_LPI		0x018 /* DMAC Apb Low Power Interface Reg */
+#define DMAC_APB_BYTE_WR_CH_EN	0x01C /* DMAC Apb Byte Write Enable */
+#define DMAC_APB_HALFWORD_WR_CH_EN	0x020 /* DMAC Halfword write enables */
+
+#define UNUSED_CHANNEL		0x3F /* Set unused DMA channel to 0x3F */
+#define MAX_BLOCK_SIZE		0x1000 /* 1024 blocks * 4 bytes data width */
 
 /* DMAC_CFG */
 #define DMAC_EN_POS			0
-- 
2.18.0

[PATCH 13/15] dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA handshake

[Sia Jee Heng]

Add support for Intel KeemBay AxiDMA device handshake programming.
Device handshake number passed in to the AxiDMA shall be written to
the Intel KeemBay AxiDMA hardware handshake registers before DMA
operations are started.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
---
 .../dma/dw-axi-dmac/dw-axi-dmac-platform.c    | 52 +++++++++++++++++++
 1 file changed, 52 insertions(+)

diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
index 19806c586e81..0f40b41fd5c0 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
@@ -445,6 +445,48 @@ static void dma_chan_free_chan_resources(struct dma_chan *dchan)
 	pm_runtime_put(chan->chip->dev);
 }
 
+static int dw_axi_dma_set_hw_channel(struct axi_dma_chip *chip, u32 hs_number,
+				     bool set)
+{
+	unsigned long start = 0;
+	unsigned long reg_value;
+	unsigned long reg_mask;
+	unsigned long reg_set;
+	unsigned long mask;
+	unsigned long val;
+
+	if (!chip->apb_regs)
+		return -ENODEV;
+
+	/*
+	 * An unused DMA channel has a default value of 0x3F.
+	 * Lock the DMA channel by assign a handshake number to the channel.
+	 * Unlock the DMA channel by assign 0x3F to the channel.
+	 */
+	if (set) {
+		reg_set = UNUSED_CHANNEL;
+		val = hs_number;
+	} else {
+		reg_set = hs_number;
+		val = UNUSED_CHANNEL;
+	}
+
+	reg_value = lo_hi_readq(chip->apb_regs + DMAC_APB_HW_HS_SEL_0);
+
+	for_each_set_clump8(start, reg_mask, &reg_value, 64) {
+		if (reg_mask == reg_set) {
+			mask = GENMASK_ULL(start + 7, start);
+			reg_value &= ~mask;
+			reg_value |= rol64(val, start);
+			lo_hi_writeq(reg_value,
+				     chip->apb_regs + DMAC_APB_HW_HS_SEL_0);
+			break;
+		}
+	}
+
+	return 0;
+}
+
 /*
  * If DW_axi_dmac sees CHx_CTL.ShadowReg_Or_LLI_Last bit of the fetched LLI
  * as 1, it understands that the current block is the final block in the
@@ -725,6 +767,9 @@ dw_axi_dma_chan_prep_cyclic(struct dma_chan *dchan, dma_addr_t dma_addr,
 		llp = hw_desc->llp;
 	} while (num_periods);
 
+	if (dw_axi_dma_set_hw_channel(chan->chip, chan->hw_hs_num, true))
+		goto err_desc_get;
+
 	return vchan_tx_prep(&chan->vc, &desc->vd, flags);
 
 err_desc_get:
@@ -851,6 +896,9 @@ dw_axi_dma_chan_prep_slave_sg(struct dma_chan *dchan, struct scatterlist *sgl,
 		llp = hw_desc->llp;
 	} while (sg_len);
 
+	if (dw_axi_dma_set_hw_channel(chan->chip, chan->hw_hs_num, true))
+		goto err_desc_get;
+
 	return vchan_tx_prep(&chan->vc, &desc->vd, flags);
 
 err_desc_get:
@@ -1019,6 +1067,10 @@ static int dma_chan_terminate_all(struct dma_chan *dchan)
 		dev_warn(dchan2dev(dchan),
 			 "%s failed to stop\n", axi_chan_name(chan));
 
+	if (chan->direction != DMA_MEM_TO_MEM)
+		dw_axi_dma_set_hw_channel(chan->chip,
+					  chan->hw_hs_num, false);
+
 	spin_lock_irqsave(&chan->vc.lock, flags);
 
 	vchan_get_all_descriptors(&chan->vc, &head);
-- 
2.18.0

[PATCH 14/15] dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA BYTE and HALFWORD registers

[Sia Jee Heng]

Add support for Intel KeemBay AxiDMA BYTE and HALFWORD registers
programming.

Intel KeemBay AxiDMA supports data transfer between device to memory
and memory to device operations.

This code is needed by I2C, I3C, I2S, SPI and UART which uses FIFO
size of 8bits and 16bits to perform memory to device data transfer
operation. 0-padding functionality is provided to avoid
pre-processing of data on CPU.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
---
 .../dma/dw-axi-dmac/dw-axi-dmac-platform.c    | 44 ++++++++++++++++---
 1 file changed, 39 insertions(+), 5 deletions(-)

diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
index 0f40b41fd5c0..d4fca3ffe67f 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
@@ -312,7 +312,7 @@ static void axi_chan_block_xfer_start(struct axi_dma_chan *chan,
 				      struct axi_dma_desc *first)
 {
 	u32 priority = chan->chip->dw->hdata->priority[chan->id];
-	u32 reg, irq_mask;
+	u32 reg, irq_mask, reg_width, offset, val;
 	u8 lms = 0; /* Select AXI0 master for LLI fetching */
 
 	if (unlikely(axi_chan_is_hw_enable(chan))) {
@@ -334,6 +334,25 @@ static void axi_chan_block_xfer_start(struct axi_dma_chan *chan,
 	       DWAXIDMAC_HS_SEL_HW << CH_CFG_H_HS_SEL_SRC_POS);
 	switch (chan->direction) {
 	case DMA_MEM_TO_DEV:
+		if (chan->chip->apb_regs) {
+			reg_width = __ffs(chan->config.dst_addr_width);
+			/*
+			 * Configure Byte and Halfword register
+			 * for MEM_TO_DEV only.
+			 */
+			if (reg_width == DWAXIDMAC_TRANS_WIDTH_16) {
+				offset = DMAC_APB_HALFWORD_WR_CH_EN;
+				val = ioread32(chan->chip->apb_regs + offset);
+				val |= BIT(chan->id);
+				iowrite32(val, chan->chip->apb_regs + offset);
+			} else if (reg_width == DWAXIDMAC_TRANS_WIDTH_8) {
+				offset = DMAC_APB_BYTE_WR_CH_EN;
+				val = ioread32(chan->chip->apb_regs + offset);
+				val |= BIT(chan->id);
+				iowrite32(val, chan->chip->apb_regs + offset);
+			}
+		}
+
 		reg |= (chan->config.device_fc ?
 			DWAXIDMAC_TT_FC_MEM_TO_PER_DST :
 			DWAXIDMAC_TT_FC_MEM_TO_PER_DMAC)
@@ -1054,8 +1073,9 @@ static int dma_chan_terminate_all(struct dma_chan *dchan)
 {
 	struct axi_dma_chan *chan = dchan_to_axi_dma_chan(dchan);
 	u32 chan_active = BIT(chan->id) << DMAC_CHAN_EN_SHIFT;
+	u32 reg_width = __ffs(chan->config.dst_addr_width);
 	unsigned long flags;
-	u32 val;
+	u32 offset, val;
 	int ret;
 	LIST_HEAD(head);
 
@@ -1067,9 +1087,23 @@ static int dma_chan_terminate_all(struct dma_chan *dchan)
 		dev_warn(dchan2dev(dchan),
 			 "%s failed to stop\n", axi_chan_name(chan));
 
-	if (chan->direction != DMA_MEM_TO_MEM)
-		dw_axi_dma_set_hw_channel(chan->chip,
-					  chan->hw_hs_num, false);
+	if (chan->direction != DMA_MEM_TO_MEM) {
+		ret = dw_axi_dma_set_hw_channel(chan->chip,
+						chan->hw_hs_num, false);
+		if (ret == 0 && chan->direction == DMA_MEM_TO_DEV) {
+			if (reg_width == DWAXIDMAC_TRANS_WIDTH_8) {
+				offset = DMAC_APB_BYTE_WR_CH_EN;
+				val = ioread32(chan->chip->apb_regs + offset);
+				val &= ~BIT(chan->id);
+				iowrite32(val, chan->chip->apb_regs + offset);
+			} else if (reg_width == DWAXIDMAC_TRANS_WIDTH_16) {
+				offset = DMAC_APB_HALFWORD_WR_CH_EN;
+				val = ioread32(chan->chip->apb_regs + offset);
+				val &= ~BIT(chan->id);
+				iowrite32(val, chan->chip->apb_regs + offset);
+			}
+		}
+	}
 
 	spin_lock_irqsave(&chan->vc.lock, flags);
 
-- 
2.18.0

[PATCH 15/15] dmaengine: dw-axi-dmac: Set constraint to the Max segment size

[Sia Jee Heng]

Add support for DMA Scatter-Gather (SG) constraint so that DMA clients can
handle the AxiDMA limitation.

Without supporting DMA constraint the default Max segment size reported by
dmaengine is 64KB, which is not supported by Intel KeemBay AxiDMA.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
---
 drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c | 8 ++++++++
 drivers/dma/dw-axi-dmac/dw-axi-dmac.h          | 1 +
 2 files changed, 9 insertions(+)

diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
index d4fca3ffe67f..bd56e21663c3 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
@@ -12,6 +12,7 @@
 #include <linux/device.h>
 #include <linux/dmaengine.h>
 #include <linux/dmapool.h>
+#include <linux/dma-mapping.h>
 #include <linux/err.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
@@ -1407,6 +1408,13 @@ static int dw_probe(struct platform_device *pdev)
 	dw->dma.device_prep_slave_sg = dw_axi_dma_chan_prep_slave_sg;
 	dw->dma.device_prep_dma_cyclic = dw_axi_dma_chan_prep_cyclic;
 
+	/*
+	 * Synopsis DesignWare AxiDMA datasheet mentioned Maximum
+	 * supported blocks is 1024. Device register width is 4 bytes.
+	 * Therefore, set constraint to 1024 * 4.
+	 */
+	dw->dma.dev->dma_parms = &dw->dma_parms;
+	dma_set_max_seg_size(&pdev->dev, MAX_BLOCK_SIZE);
 	platform_set_drvdata(pdev, chip);
 
 	pm_runtime_enable(chip->dev);
diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
index f64e8d33b127..67669049cead 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
@@ -54,6 +54,7 @@ struct axi_dma_chan {
 struct dw_axi_dma {
 	struct dma_device	dma;
 	struct dw_axi_dma_hcfg	*hdata;
+	struct device_dma_parameters	dma_parms;
 
 	/* channels */
 	struct axi_dma_chan	*chan;
-- 
2.18.0

Re: [PATCH 00/15] dmaengine: dw-axi-dmac: support Intel KeemBay AxiDMA

[Andy Shevchenko]

On Mon, Oct 12, 2020 at 12:21:45PM +0800, Sia Jee Heng wrote:
> The below patch series are to support AxiDMA running on Intel KeemBay SoC.
> The base driver is dw-axi-dmac but code refactoring is needed, for example:
> - Support YAML Schemas DT binding.
> - Replacing Linked List with virtual descriptor management.
> - Remove unrelated hw desc stuff from dma memory pool.
> - Manage dma memory pool alloc/destroy based on channel activity.
> - Support dmaengine device_sync() callback.
> - Support dmaengine device_config().
> - Support dmaegnine device_prep_slave_sg().
> - Support dmaengine device_prep_dma_cyclic().
> - Support of_dma_controller_register().
> - Support burst residue granularity.
> - Support Intel KeemBay AxiDMA registers.
> - Support Intel KeemBay AxiDMA device handshake.
> - Support Intel KeemBay AxiDMA BYTE and HALFWORD device operation.
> - Add constraint to Max segment size.
> 
> This patch set is to replace the patch series submitted at:
> https://lore.kernel.org/dmaengine/1599213094-30144-1-git-send-email-jee.heng.sia@intel.com/

And it means effectively the bumped version, besides the fact that you double
sent this one...


Please fix and resend. Note, now is merge window is open. Depends on
maintainer's flow it may be good or bad time to resend with properly formed
changelog and version of the series.

> This patch series are tested on Intel KeemBay platform.
> 
> 
> Sia Jee Heng (15):
>   dt-bindings: dma: Add YAML schemas for dw-axi-dmac
>   dmaengine: dw-axi-dmac: simplify descriptor management
>   dmaengine: dw-axi-dmac: move dma_pool_create() to
>     alloc_chan_resources()
>   dmaengine: dw-axi-dmac: Add device_synchronize() callback
>   dmaengine: dw-axi-dmac: Add device_config operation
>   dmaengine: dw-axi-dmac: Support device_prep_slave_sg
>   dmaegine: dw-axi-dmac: Support device_prep_dma_cyclic()
>   dmaengine: dw-axi-dmac: Support of_dma_controller_register()
>   dmaengine: dw-axi-dmac: Support burst residue granularity
>   dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA support
>   dt-binding: dma: dw-axi-dmac: Add support for Intel KeemBay AxiDMA
>   dmaengine: dw-axi-dmac: Add Intel KeemBay DMA register fields
>   dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA handshake
>   dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA BYTE and HALFWORD
>     registers
>   dmaengine: dw-axi-dmac: Set constraint to the Max segment size
> 
>  .../bindings/dma/snps,dw-axi-dmac.txt         |  39 -
>  .../bindings/dma/snps,dw-axi-dmac.yaml        | 149 ++++
>  .../dma/dw-axi-dmac/dw-axi-dmac-platform.c    | 696 +++++++++++++++---
>  drivers/dma/dw-axi-dmac/dw-axi-dmac.h         |  33 +-
>  4 files changed, 783 insertions(+), 134 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.txt
>  create mode 100644 Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
> 
> -- 
> 2.18.0
> 

-- 
With Best Regards,
Andy Shevchenko

RE: [PATCH 00/15] dmaengine: dw-axi-dmac: support Intel KeemBay AxiDMA

[Sia, Jee Heng]

> -----Original Message-----
> From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Sent: 12 October 2020 9:59 PM
> To: Sia, Jee Heng <jee.heng.sia@intel.com>
> Cc: vkoul@kernel.org; Eugeniy.Paltsev@synopsys.com;
> dmaengine@vger.kernel.org; linux-kernel@vger.kernel.org
> Subject: Re: [PATCH 00/15] dmaengine: dw-axi-dmac: support Intel KeemBay
> AxiDMA
> 
> On Mon, Oct 12, 2020 at 12:21:45PM +0800, Sia Jee Heng wrote:
> > The below patch series are to support AxiDMA running on Intel KeemBay SoC.
> > The base driver is dw-axi-dmac but code refactoring is needed, for example:
> > - Support YAML Schemas DT binding.
> > - Replacing Linked List with virtual descriptor management.
> > - Remove unrelated hw desc stuff from dma memory pool.
> > - Manage dma memory pool alloc/destroy based on channel activity.
> > - Support dmaengine device_sync() callback.
> > - Support dmaengine device_config().
> > - Support dmaegnine device_prep_slave_sg().
> > - Support dmaengine device_prep_dma_cyclic().
> > - Support of_dma_controller_register().
> > - Support burst residue granularity.
> > - Support Intel KeemBay AxiDMA registers.
> > - Support Intel KeemBay AxiDMA device handshake.
> > - Support Intel KeemBay AxiDMA BYTE and HALFWORD device operation.
> > - Add constraint to Max segment size.
> >
> > This patch set is to replace the patch series submitted at:
> > https://lore.kernel.org/dmaengine/1599213094-30144-1-git-send-email-je
> > e.heng.sia@intel.com/
> 
> And it means effectively the bumped version, besides the fact that you double
> sent this one...
> 
> 
> Please fix and resend. Note, now is merge window is open. Depends on
> maintainer's flow it may be good or bad time to resend with properly formed
> changelog and version of the series.
[>>] Thanks. Will resend the patch set with v1 in the header.
> 
> > This patch series are tested on Intel KeemBay platform.
> >
> >
> > Sia Jee Heng (15):
> >   dt-bindings: dma: Add YAML schemas for dw-axi-dmac
> >   dmaengine: dw-axi-dmac: simplify descriptor management
> >   dmaengine: dw-axi-dmac: move dma_pool_create() to
> >     alloc_chan_resources()
> >   dmaengine: dw-axi-dmac: Add device_synchronize() callback
> >   dmaengine: dw-axi-dmac: Add device_config operation
> >   dmaengine: dw-axi-dmac: Support device_prep_slave_sg
> >   dmaegine: dw-axi-dmac: Support device_prep_dma_cyclic()
> >   dmaengine: dw-axi-dmac: Support of_dma_controller_register()
> >   dmaengine: dw-axi-dmac: Support burst residue granularity
> >   dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA support
> >   dt-binding: dma: dw-axi-dmac: Add support for Intel KeemBay AxiDMA
> >   dmaengine: dw-axi-dmac: Add Intel KeemBay DMA register fields
> >   dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA handshake
> >   dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA BYTE and HALFWORD
> >     registers
> >   dmaengine: dw-axi-dmac: Set constraint to the Max segment size
> >
> >  .../bindings/dma/snps,dw-axi-dmac.txt         |  39 -
> >  .../bindings/dma/snps,dw-axi-dmac.yaml        | 149 ++++
> >  .../dma/dw-axi-dmac/dw-axi-dmac-platform.c    | 696 +++++++++++++++---
> >  drivers/dma/dw-axi-dmac/dw-axi-dmac.h         |  33 +-
> >  4 files changed, 783 insertions(+), 134 deletions(-)  delete mode
> > 100644 Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.txt
> >  create mode 100644
> > Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
> >
> > --
> > 2.18.0
> >
> 
> --
> With Best Regards,
> Andy Shevchenko
> 

Re: [PATCH 00/15] dmaengine: dw-axi-dmac: support Intel KeemBay AxiDMA

[Vinod Koul]

On 13-10-20, 05:49, Sia, Jee Heng wrote:
> > >
> > > This patch set is to replace the patch series submitted at:
> > > https://lore.kernel.org/dmaengine/1599213094-30144-1-git-send-email-je
> > > e.heng.sia@intel.com/
> > 
> > And it means effectively the bumped version, besides the fact that you double
> > sent this one...
> > 
> > 
> > Please fix and resend. Note, now is merge window is open. Depends on
> > maintainer's flow it may be good or bad time to resend with properly formed
> > changelog and version of the series.

yeah sorry I wont look at it till merge window closes

> [>>] Thanks. Will resend the patch set with v1 in the header.

Should this be v1, v1 was the first post, this would be v2!

Please use git format-patch -v2 to autogenerate version headers in
patches..

I thought Intel folks had internal review list to take care of these
things, is it no longer used..?

-- 
~Vinod

RE: [PATCH 00/15] dmaengine: dw-axi-dmac: support Intel KeemBay AxiDMA

[Sia, Jee Heng]

> -----Original Message-----
> From: Vinod Koul <vkoul@kernel.org>
> Sent: 13 October 2020 3:01 PM
> To: Sia, Jee Heng <jee.heng.sia@intel.com>
> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>;
> Eugeniy.Paltsev@synopsys.com; dmaengine@vger.kernel.org; linux-
> kernel@vger.kernel.org
> Subject: Re: [PATCH 00/15] dmaengine: dw-axi-dmac: support Intel KeemBay
> AxiDMA
> 
> On 13-10-20, 05:49, Sia, Jee Heng wrote:
> > > >
> > > > This patch set is to replace the patch series submitted at:
> > > > https://lore.kernel.org/dmaengine/1599213094-30144-1-git-send-emai
> > > > l-je
> > > > e.heng.sia@intel.com/
> > >
> > > And it means effectively the bumped version, besides the fact that
> > > you double sent this one...
> > >
> > >
> > > Please fix and resend. Note, now is merge window is open. Depends on
> > > maintainer's flow it may be good or bad time to resend with properly
> > > formed changelog and version of the series.
> 
> yeah sorry I wont look at it till merge window closes
[>>] Sorry.
> 
> > [>>] Thanks. Will resend the patch set with v1 in the header.
> 
> Should this be v1, v1 was the first post, this would be v2!
> 
[>>] Thanks for the correction. I meant v2.
> Please use git format-patch -v2 to autogenerate version headers in patches..
> 
> I thought Intel folks had internal review list to take care of these things, is it no
> longer used..?
[>>] We are, but I am confuse on what should I do to the existing patch set sent in 
https://lore.kernel.org/dmaengine/1599213094-30144-1-git-send-email-jee.heng.sia@intel.com/. There is no response from anyone.
> 
> --
> ~Vinod

Re: [PATCH 00/15] dmaengine: dw-axi-dmac: support Intel KeemBay AxiDMA

[Vinod Koul]

On 13-10-20, 07:12, Sia, Jee Heng wrote:
> 
> 
> > -----Original Message-----
> > From: Vinod Koul <vkoul@kernel.org>
> > Sent: 13 October 2020 3:01 PM
> > To: Sia, Jee Heng <jee.heng.sia@intel.com>
> > Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>;
> > Eugeniy.Paltsev@synopsys.com; dmaengine@vger.kernel.org; linux-
> > kernel@vger.kernel.org
> > Subject: Re: [PATCH 00/15] dmaengine: dw-axi-dmac: support Intel KeemBay
> > AxiDMA
> > 
> > On 13-10-20, 05:49, Sia, Jee Heng wrote:
> > > > >
> > > > > This patch set is to replace the patch series submitted at:
> > > > > https://lore.kernel.org/dmaengine/1599213094-30144-1-git-send-emai
> > > > > l-je
> > > > > e.heng.sia@intel.com/
> > > >
> > > > And it means effectively the bumped version, besides the fact that
> > > > you double sent this one...
> > > >
> > > >
> > > > Please fix and resend. Note, now is merge window is open. Depends on
> > > > maintainer's flow it may be good or bad time to resend with properly
> > > > formed changelog and version of the series.
> > 
> > yeah sorry I wont look at it till merge window closes
> [>>] Sorry.
> > 
> > > [>>] Thanks. Will resend the patch set with v1 in the header.
> > 
> > Should this be v1, v1 was the first post, this would be v2!
> > 
> [>>] Thanks for the correction. I meant v2.
> > Please use git format-patch -v2 to autogenerate version headers in patches..
> > 
> > I thought Intel folks had internal review list to take care of these things, is it no
> > longer used..?
> [>>] We are, but I am confuse on what should I do to the existing patch set sent in 
> https://lore.kernel.org/dmaengine/1599213094-30144-1-git-send-email-jee.heng.sia@intel.com/. There is no response from anyone.

Sorry my bad looks like I have missed this one, can you please repost
this after merge window closes and I will look into it

Thanks

-- 
~Vinod

Re: [PATCH 00/15] dmaengine: dw-axi-dmac: support Intel KeemBay AxiDMA

[Eugeniy Paltsev]

Hi Sia,

Is this patch series available in some public git repo?
I want to test it on our HW with DW AXI DMAC.

Thanks.
---
 Eugeniy Paltsev


________________________________________
From: Sia Jee Heng <jee.heng.sia@intel.com>
Sent: Monday, October 12, 2020 07:21
To: vkoul@kernel.org; Eugeniy Paltsev
Cc: andriy.shevchenko@linux.intel.com; dmaengine@vger.kernel.org; linux-kernel@vger.kernel.org
Subject: [PATCH 00/15] dmaengine: dw-axi-dmac: support Intel KeemBay AxiDMA

The below patch series are to support AxiDMA running on Intel KeemBay SoC.
The base driver is dw-axi-dmac but code refactoring is needed, for example:
- Support YAML Schemas DT binding.
- Replacing Linked List with virtual descriptor management.
- Remove unrelated hw desc stuff from dma memory pool.
- Manage dma memory pool alloc/destroy based on channel activity.
- Support dmaengine device_sync() callback.
- Support dmaengine device_config().
- Support dmaegnine device_prep_slave_sg().
- Support dmaengine device_prep_dma_cyclic().
- Support of_dma_controller_register().
- Support burst residue granularity.
- Support Intel KeemBay AxiDMA registers.
- Support Intel KeemBay AxiDMA device handshake.
- Support Intel KeemBay AxiDMA BYTE and HALFWORD device operation.
- Add constraint to Max segment size.

This patch set is to replace the patch series submitted at:
https://urldefense.com/v3/__https://lore.kernel.org/dmaengine/1599213094-30144-1-git-send-email-jee.heng.sia@intel.com/__;!!A4F2R9G_pg!Nemc1rSHID2X4d8pr0LNF0nD9Odrn425GRV8MSTPDvPwE6a3iWPeylAJSaxwqXjfPapMO4U$

This patch series are tested on Intel KeemBay platform.


Sia Jee Heng (15):
  dt-bindings: dma: Add YAML schemas for dw-axi-dmac
  dmaengine: dw-axi-dmac: simplify descriptor management
  dmaengine: dw-axi-dmac: move dma_pool_create() to
    alloc_chan_resources()
  dmaengine: dw-axi-dmac: Add device_synchronize() callback
  dmaengine: dw-axi-dmac: Add device_config operation
  dmaengine: dw-axi-dmac: Support device_prep_slave_sg
  dmaegine: dw-axi-dmac: Support device_prep_dma_cyclic()
  dmaengine: dw-axi-dmac: Support of_dma_controller_register()
  dmaengine: dw-axi-dmac: Support burst residue granularity
  dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA support
  dt-binding: dma: dw-axi-dmac: Add support for Intel KeemBay AxiDMA
  dmaengine: dw-axi-dmac: Add Intel KeemBay DMA register fields
  dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA handshake
  dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA BYTE and HALFWORD
    registers
  dmaengine: dw-axi-dmac: Set constraint to the Max segment size

 .../bindings/dma/snps,dw-axi-dmac.txt         |  39 -
 .../bindings/dma/snps,dw-axi-dmac.yaml        | 149 ++++
 .../dma/dw-axi-dmac/dw-axi-dmac-platform.c    | 696 +++++++++++++++---
 drivers/dma/dw-axi-dmac/dw-axi-dmac.h         |  33 +-
 4 files changed, 783 insertions(+), 134 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.txt
 create mode 100644 Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml

--
2.18.0

RE: [PATCH 00/15] dmaengine: dw-axi-dmac: support Intel KeemBay AxiDMA

[Sia, Jee Heng]

> -----Original Message-----
> From: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
> Sent: 16 October 2020 10:51 PM
> To: Sia, Jee Heng <jee.heng.sia@intel.com>
> Cc: andriy.shevchenko@linux.intel.com; dmaengine@vger.kernel.org; linux-
> kernel@vger.kernel.org; vkoul@kernel.org; Alexey Brodkin
> <Alexey.Brodkin@synopsys.com>
> Subject: Re: [PATCH 00/15] dmaengine: dw-axi-dmac: support Intel KeemBay
> AxiDMA
> 
> Hi Sia,
> 
> Is this patch series available in some public git repo?
[>>] We do not have public git repo, but the patch series are tested on kernel v5.9
> I want to test it on our HW with DW AXI DMAC.
> 
> Thanks.
> ---
>  Eugeniy Paltsev
> 
> 
> ________________________________________
> From: Sia Jee Heng <jee.heng.sia@intel.com>
> Sent: Monday, October 12, 2020 07:21
> To: vkoul@kernel.org; Eugeniy Paltsev
> Cc: andriy.shevchenko@linux.intel.com; dmaengine@vger.kernel.org; linux-
> kernel@vger.kernel.org
> Subject: [PATCH 00/15] dmaengine: dw-axi-dmac: support Intel KeemBay
> AxiDMA
> 
> The below patch series are to support AxiDMA running on Intel KeemBay SoC.
> The base driver is dw-axi-dmac but code refactoring is needed, for example:
> - Support YAML Schemas DT binding.
> - Replacing Linked List with virtual descriptor management.
> - Remove unrelated hw desc stuff from dma memory pool.
> - Manage dma memory pool alloc/destroy based on channel activity.
> - Support dmaengine device_sync() callback.
> - Support dmaengine device_config().
> - Support dmaegnine device_prep_slave_sg().
> - Support dmaengine device_prep_dma_cyclic().
> - Support of_dma_controller_register().
> - Support burst residue granularity.
> - Support Intel KeemBay AxiDMA registers.
> - Support Intel KeemBay AxiDMA device handshake.
> - Support Intel KeemBay AxiDMA BYTE and HALFWORD device operation.
> - Add constraint to Max segment size.
> 
> This patch set is to replace the patch series submitted at:
> https://urldefense.com/v3/__https://lore.kernel.org/dmaengine/1599213094-
> 30144-1-git-send-email-
> jee.heng.sia@intel.com/__;!!A4F2R9G_pg!Nemc1rSHID2X4d8pr0LNF0nD9Odrn4
> 25GRV8MSTPDvPwE6a3iWPeylAJSaxwqXjfPapMO4U$
> 
> This patch series are tested on Intel KeemBay platform.
> 
> 
> Sia Jee Heng (15):
>   dt-bindings: dma: Add YAML schemas for dw-axi-dmac
>   dmaengine: dw-axi-dmac: simplify descriptor management
>   dmaengine: dw-axi-dmac: move dma_pool_create() to
>     alloc_chan_resources()
>   dmaengine: dw-axi-dmac: Add device_synchronize() callback
>   dmaengine: dw-axi-dmac: Add device_config operation
>   dmaengine: dw-axi-dmac: Support device_prep_slave_sg
>   dmaegine: dw-axi-dmac: Support device_prep_dma_cyclic()
>   dmaengine: dw-axi-dmac: Support of_dma_controller_register()
>   dmaengine: dw-axi-dmac: Support burst residue granularity
>   dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA support
>   dt-binding: dma: dw-axi-dmac: Add support for Intel KeemBay AxiDMA
>   dmaengine: dw-axi-dmac: Add Intel KeemBay DMA register fields
>   dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA handshake
>   dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA BYTE and HALFWORD
>     registers
>   dmaengine: dw-axi-dmac: Set constraint to the Max segment size
> 
>  .../bindings/dma/snps,dw-axi-dmac.txt         |  39 -
>  .../bindings/dma/snps,dw-axi-dmac.yaml        | 149 ++++
>  .../dma/dw-axi-dmac/dw-axi-dmac-platform.c    | 696 +++++++++++++++---
>  drivers/dma/dw-axi-dmac/dw-axi-dmac.h         |  33 +-
>  4 files changed, 783 insertions(+), 134 deletions(-)  delete mode 100644
> Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.txt
>  create mode 100644 Documentation/devicetree/bindings/dma/snps,dw-axi-
> dmac.yaml
> 
> --
> 2.18.0

Re: [PATCH 00/15] dmaengine: dw-axi-dmac: support Intel KeemBay AxiDMA

[andriy.shevchenko]

On Mon, Oct 19, 2020 at 01:22:03AM +0000, Sia, Jee Heng wrote:
> > From: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
> > Sent: 16 October 2020 10:51 PM

> > Hi Sia,
> > 
> > Is this patch series available in some public git repo?
> [>>] We do not have public git repo, but the patch series are tested on kernel v5.9

Sia, can you fork a kernel repository on GitHub or GitLab and create there a
branch with this series based on v5.9?

> > I want to test it on our HW with DW AXI DMAC.

Eugeniy, to be honest, it's not a big deal to create one either with help of
lore.kernel.org or patchwork [1].

For your convenience (disclaimer, I can't guarantee I haven't missed something
here) I published it here [2]. Note, I didn't compile it.

[1]: https://patchwork.kernel.org/project/linux-dmaengine/cover/20201012042200.29787-1-jee.heng.sia@intel.com/
[2]: https://gitlab.com/andy-shev/next/-/tree/topic/dw-dma-axi

-- 
With Best Regards,
Andy Shevchenko

RE: [PATCH 00/15] dmaengine: dw-axi-dmac: support Intel KeemBay AxiDMA

[Sia, Jee Heng]

> -----Original Message-----
> From: andriy.shevchenko@linux.intel.com
> <andriy.shevchenko@linux.intel.com>
> Sent: 19 October 2020 7:39 PM
> To: Sia, Jee Heng <jee.heng.sia@intel.com>
> Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>;
> dmaengine@vger.kernel.org; linux-kernel@vger.kernel.org; vkoul@kernel.org;
> Alexey Brodkin <Alexey.Brodkin@synopsys.com>
> Subject: Re: [PATCH 00/15] dmaengine: dw-axi-dmac: support Intel KeemBay
> AxiDMA
> 
> On Mon, Oct 19, 2020 at 01:22:03AM +0000, Sia, Jee Heng wrote:
> > > From: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
> > > Sent: 16 October 2020 10:51 PM
> 
> > > Hi Sia,
> > >
> > > Is this patch series available in some public git repo?
> > [>>] We do not have public git repo, but the patch series are tested
> > on kernel v5.9
> 
> Sia, can you fork a kernel repository on GitHub or GitLab and create there a
> branch with this series based on v5.9?
[>>] Thanks Andy to help to create branch at https://gitlab.com/andy-shev/next/-/tree/topic/dw-dma-axi.
Eugeniy, you can start to use this branch and I shall learn to create a public repo. Do let me know if you need anything else.
> 
> > > I want to test it on our HW with DW AXI DMAC.
> 
> Eugeniy, to be honest, it's not a big deal to create one either with help of
> lore.kernel.org or patchwork [1].
> 
> For your convenience (disclaimer, I can't guarantee I haven't missed something
> here) I published it here [2]. Note, I didn't compile it.
> 
> [1]: https://patchwork.kernel.org/project/linux-
> dmaengine/cover/20201012042200.29787-1-jee.heng.sia@intel.com/
> [2]: https://gitlab.com/andy-shev/next/-/tree/topic/dw-dma-axi
> 
> --
> With Best Regards,
> Andy Shevchenko
>