dmaengine.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
 messages from 2019-02-26 07:15:52 to 2019-04-15 12:15:37 UTC [more...]

[PATCH 0/7] Fix some bugs and add new feature for Spreadtrum DMA engine
 2019-04-15 12:14 UTC  (7+ messages)
` [3/7] dmaengine: sprd: Fix the incorrect start for 2-stage destination channels
  ` [PATCH 3/7] "
` [4/7] dmaengine: sprd: Add device validation to support multiple controllers
  ` [PATCH 4/7] "
` [5/7] dmaengine: sprd: Fix block length overflow
  ` [PATCH 5/7] "

[7/7] dmaengine: sprd: Add interrupt support for 2-stage transfer
 2019-04-15 12:15 UTC 

[6/7] dmaengine: sprd: Fix the right place to configure 2-stage transfer
 2019-04-15 12:15 UTC 

[2/7] dmaengine: sprd: Add validation of current descriptor in irq handler
 2019-04-15 12:14 UTC 

[1/7] dmaengine: sprd: Fix the possible crash when getting engine status
 2019-04-15 12:14 UTC 

[4/6] dma: tegra: add accurate reporting of dma state
 2019-04-14 15:20 UTC  (8+ messages)
              ` [PATCH 4/6] "

[v3,1/2] dmaengine: sh: rcar-dmac: With cyclic DMA residue 0 is valid
 2019-04-12  9:54 UTC  (10+ messages)
` [PATCH v3 1/2] "
` [v3,2/2] dmaengine: sh: rcar-dmac: Fix glitch in dmaengine_tx_status
  ` [PATCH v3 2/2] "

dmaengine: rcar-dmac: Update copyright information
 2019-04-11 15:17 UTC  (6+ messages)
` [PATCH] "

[v11,1/4] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
 2019-04-11  8:20 UTC  (7+ messages)
      ` [PATCH v11 1/4] "

[v1] dmaengine: idma64: Move driver name to the header
 2019-04-09 18:01 UTC  (6+ messages)
` [PATCH v1] "

[v2] mfd: intel-lpss: Set the device in reset state when init
 2019-04-09 15:36 UTC  (4+ messages)
` [PATCH v2] "

[V3,1/2] dmaengine: fsl-dpaa2-qdma: Add the DPDMAI(Data Path DMA Interface) support
 2019-04-09  7:22 UTC  (4+ messages)
` [V3 1/2] "
` [V3,2/2] dmaengine: fsl-dpaa2-qdma: Add NXP dpaa2 qDMA controller driver for Layerscape SoCs
  ` [V3 2/2] "

Issues with i.MX SPI DMA transfers
 2019-04-09  3:26 UTC  (6+ messages)

intel-lpss: Set the device in reset state when init
 2019-04-08  8:05 UTC  (6+ messages)
` [PATCH] "

dmaengine: bcm2835: Drop duplicate capability setting
 2019-04-05  7:07 UTC 

dmaengine: bcm2835: Drop duplicate capability setting
 2019-04-04 17:25 UTC 

Issues with i.MX SPI DMA transfers
 2019-04-03 17:13 UTC 

dmaengine: pl330: _stop: clear interrupt status
 2019-04-03 11:06 UTC 

[v2,3/3] arm64: dts: imx8mq: Change ahb clock for imx8mq
 2019-04-03 11:00 UTC 

[v2,1/3] arm64: dts: imx8mq: Fix the fsl,imx8mq-sdma compatible string
 2019-04-03 10:59 UTC 

[v3,3/3] dmaengine: at_xdmac: only monitor overflow errors for peripheral xfer
 2019-04-03 10:23 UTC 

[v3,2/3] dmaengine: at_xdmac: enhance channel errors handling in tasklet
 2019-04-03 10:23 UTC 

[v3,1/3] dmaengine: at_xdmac: remove BUG_ON macro in tasklet
 2019-04-03 10:23 UTC 

[v2,1/3] dmaengine: at_xdmac: remove BUG_ON macro in tasklet
 2019-04-03 10:22 UTC 

[v2,3/3] dmaengine: at_xdmac: only monitor overflow errors for peripheral xfer
 2019-04-03 10:09 UTC 

[v2,2/3] dmaengine: at_xdmac: enhance channel errors handling in tasklet
 2019-04-03 10:09 UTC 

[v2,1/3] dmaengine: at_xdmac: remove BUG_ON macro in tasklet
 2019-04-03 10:09 UTC 

[2/3] dmaengine: at_xdmac: enhance channel errors handling in tasklet
 2019-04-03 10:05 UTC 

[RFC] dmaengine: bcm2835: Avoid GFP_KERNEL in device_prep_slave_sg
 2019-04-01 18:38 UTC 

[2/2] dmaengine: sh: rcar-dmac: Fix glitch in dmaengine_tx_status
 2019-04-01 12:47 UTC 

[v2,1/3] arm64: dts: imx8mq: Fix the fsl,imx8mq-sdma compatible string
 2019-03-30 16:55 UTC 

[v2,3/3] arm64: dts: imx8mq: Change ahb clock for imx8mq
 2019-03-29 15:21 UTC 

[v2,2/3] dmaengine: imx-sdma: Only check ratio on parts that support 1:1
 2019-03-29 15:21 UTC 

[v2,1/3] arm64: dts: imx8mq: Fix the fsl,imx8mq-sdma compatible string
 2019-03-29 15:21 UTC 

[1/4] arm64: dts: imx8mq: Fix the fsl,imx8mq-sdma compatible string
 2019-03-29 14:09 UTC 

dma: ti: fix a missing check in omap_dma_prep_dma_cyclic
 2019-03-29 13:21 UTC 

[1/4] arm64: dts: imx8mq: Fix the fsl,imx8mq-sdma compatible string
 2019-03-29 11:20 UTC 

[1/4] arm64: dts: imx8mq: Fix the fsl,imx8mq-sdma compatible string
 2019-03-29  9:10 UTC 

[2/4] dmaengine: imx-sdma: Add clock ratio 1:1 check
 2019-03-28 22:52 UTC 

[3/4] dt-bindings: Document the new imx8mq-sdma compatible string
 2019-03-28 15:18 UTC 

[1/4] arm64: dts: imx8mq: Fix the fsl,imx8mq-sdma compatible string
 2019-03-28 14:56 UTC 

[4/4] arm64: dts: imx8mq: Change ahb clock for imx8mq
 2019-03-28 13:38 UTC 

[3/4] dt-bindings: Document the new imx8mq-sdma compatible string
 2019-03-28 13:38 UTC 

[2/4] dmaengine: imx-sdma: Add clock ratio 1:1 check
 2019-03-28 13:38 UTC 

[1/4] arm64: dts: imx8mq: Fix the fsl,imx8mq-sdma compatible string
 2019-03-28 13:38 UTC 

[1/6] dt-bindings: arm64: allwinner: h6: Add binding for DMA controller
 2019-03-27 23:47 UTC 

dmaengine: stm32-dma: fix residue calculation in stm32-dma
 2019-03-27 12:21 UTC 

[V2,RESEND] dmaengine: axi-dmac: Enable DMA_INTERLEAVE capability
 2019-03-26 14:07 UTC 

[V3] dmaengine: axi-dmac: Don't check the number of frames for alignment
 2019-03-26 14:05 UTC 

dmaengine: axi-dmac: Infer synthesis configuration parameters hardware
 2019-03-26 13:06 UTC 

[v2] dmaengine: stm32-mdma: Revert "Add a check on read_u32_array"
 2019-03-26  8:55 UTC 

[v2,1/1] dmaengine: imx-sdma: revert: add clock ratio 1:1 check
 2019-03-26  2:10 UTC 

[v2] dmaengine: stm32-mdma: Revert "Add a check on read_u32_array"
 2019-03-25 16:28 UTC 

[v2] dmaengine: stm32-mdma: Revert "Add a check on read_u32_array"
 2019-03-25 16:21 UTC 

[v1] Revert "dmaengine: stm32-mdma: Add a check on read_u32_array"
 2019-03-25 16:17 UTC 

[v1] Revert "dmaengine: stm32-mdma: Add a check on read_u32_array"
 2019-03-25 15:25 UTC 

[v1] Revert "dmaengine: stm32-mdma: Add a check on read_u32_array"
 2019-03-25 14:46 UTC 

dmaengine: pl08x: be fair when re-assigning physical channel
 2019-03-25  8:15 UTC 

dmaengine: axi-dmac: extend support for ZynqMP arch
 2019-03-25  5:54 UTC 

dma:xgene-dma:move spin_lock_bh to spin_lock in tasklet
 2019-03-25  5:52 UTC 

dmaengine: pl08x: be fair when re-assigning physical channel
 2019-03-25  5:13 UTC 

[V4] dmaengine: axi-dmac: Split too large segments
 2019-03-25  5:04 UTC 

[v2] dmaengine: pl330: introduce debugfs interface
 2019-03-25  4:58 UTC 

[3/3] dmaengine: edma: make edma_filter_fn private
 2019-03-25  4:56 UTC 

[2/3] dmaengine: omap-dma: make omap_dma_filter_fn private
 2019-03-25  4:56 UTC 

[v3,1/2] dmaengine: tegra210-adma: use devm_clk_*() helpers
 2019-03-25  4:54 UTC 

[2/2] dmaengine: milbeaut: Add Milbeaut AXI DMA controller
 2019-03-25  4:15 UTC 

[1/2] dt-bindings: dmaengine: Add Milbeaut AXI DMA controller bindings
 2019-03-25  4:15 UTC 

dma: ti: fix a missing check in omap_dma_prep_dma_cyclic
 2019-03-23 22:39 UTC 

[v2,1/1] dmaengine: imx-sdma: revert: add clock ratio 1:1 check
 2019-03-22 13:20 UTC 

[2/6] dmaengine: sun6i: Add a quirk for additional mbus clock
 2019-03-22 13:03 UTC 

[2/6] dmaengine: sun6i: Add a quirk for additional mbus clock
 2019-03-22 12:59 UTC 

[v2,1/1] dmaengine: imx-sdma: revert: add clock ratio 1:1 check
 2019-03-22  3:36 UTC 

[1/1] dmaengine: imx-sdma: revert: add clock ratio 1:1 check
 2019-03-22  3:31 UTC 

[1/1] dmaengine: imx-sdma: revert: add clock ratio 1:1 check
 2019-03-22  3:10 UTC 

[1/1] dmaengine: imx-sdma: revert: add clock ratio 1:1 check
 2019-03-22  3:05 UTC 

[v1] dmaengine: idma64: Use actual device for DMA transfers
 2019-03-21 14:18 UTC 

dma:xgene-dma:move spin_lock_bh to spin_lock in tasklet
 2019-03-19 16:45 UTC 

[v1] dmaengine: idma64: Use actual device for DMA transfers
 2019-03-19 14:25 UTC 

[v1] dmaengine: idma64: Use actual device for DMA transfers
 2019-03-19 12:57 UTC 

[v1] dmaengine: idma64: Use actual device for DMA transfers
 2019-03-18 15:39 UTC 

[v2] dmaengine: pl330: introduce debugfs interface
 2019-03-17 10:03 UTC 

dmaengine: pl330: introduce debugfs interface
 2019-03-17 10:02 UTC 

dmaengine: pl330: introduce debugfs interface
 2019-03-17 10:00 UTC 

dmaengine: pl330: introduce debugfs interface
 2019-03-17  9:58 UTC 

[5/6] dmaengine: sun6i: Add support for H6 DMA
 2019-03-16 11:37 UTC 

[1/6] dt-bindings: arm64: allwinner: h6: Add binding for DMA controller
 2019-03-16 11:27 UTC 

[2/6] dmaengine: sun6i: Add a quirk for additional mbus clock
 2019-03-16 11:23 UTC 

[5/6] dmaengine: sun6i: Add support for H6 DMA
 2019-03-16 11:13 UTC 

[2/6] dmaengine: sun6i: Add a quirk for additional mbus clock
 2019-03-16 11:07 UTC 

[1/6] dt-bindings: arm64: allwinner: h6: Add binding for DMA controller
 2019-03-16 10:57 UTC 

dmaengine: pl330: introduce debugfs interface
 2019-03-15 17:00 UTC 

dmaengine: pl330: introduce debugfs interface
 2019-03-14 18:49 UTC 

[v3,2/2] dmaengine: tegra210-adma: update system sleep callbacks
 2019-03-13 12:11 UTC 

[v3,2/2] dmaengine: tegra210-adma: update system sleep callbacks
 2019-03-13 11:32 UTC 

[v3,1/2] dmaengine: tegra210-adma: use devm_clk_*() helpers
 2019-03-13 11:32 UTC 

[v2,2/2] dmaengine: tegra210-adma: update system sleep callbacks
 2019-03-13 10:56 UTC 

[v2,2/2] dmaengine: tegra210-adma: update system sleep callbacks
 2019-03-13 10:49 UTC 

[v2,2/2] dmaengine: tegra210-adma: update system sleep callbacks
 2019-03-13 10:40 UTC 

[v2,2/2] dmaengine: tegra210-adma: update system sleep callbacks
 2019-03-13 10:28 UTC 

[v2,2/2] dmaengine: tegra210-adma: update system sleep callbacks
 2019-03-13  5:43 UTC 

[v2,1/2] dmaengine: tegra210-adma: use devm_clk_*() helpers
 2019-03-13  5:43 UTC 

dmaengine: tegra210-adma: use devm_clk_*() helpers
 2019-03-12 15:24 UTC 

dmaengine: tegra210-adma: use devm_clk_*() helpers
 2019-03-12 14:35 UTC 

[2/6] dmaengine: sun6i: Add a quirk for additional mbus clock
 2019-03-11  5:47 UTC 

[2/3] dmaengine: omap-dma: make omap_dma_filter_fn private
 2019-03-08 14:32 UTC 

[3/3] dmaengine: edma: make edma_filter_fn private
 2019-03-08 14:32 UTC 

[V4] dmaengine: axi-dmac: Split too large segments
 2019-03-08 13:02 UTC 

dmaengine: axi-dmac: Split too large segments
 2019-03-08 12:58 UTC 

[6/6] arm64: dts: allwinner: h6: Add DMA node
 2019-03-07 16:58 UTC 

[5/6] dmaengine: sun6i: Add support for H6 DMA
 2019-03-07 16:58 UTC 

[4/6] dmaengine: sun6i: Add a quirk for setting mode fields
 2019-03-07 16:58 UTC 

[3/6] dmaengine: sun6i: Add a quirk for setting DRQ fields
 2019-03-07 16:58 UTC 

[2/6] dmaengine: sun6i: Add a quirk for additional mbus clock
 2019-03-07 16:58 UTC 

[1/6] dt-bindings: arm64: allwinner: h6: Add binding for DMA controller
 2019-03-07 16:58 UTC 

[3/3] dmaengine: edma: make edma_filter_fn private
 2019-03-07 15:16 UTC 

[2/3] dmaengine: omap-dma: make omap_dma_filter_fn private
 2019-03-07 15:16 UTC 

[1/3] ASoC: ti: remove compat dma probing
 2019-03-07 15:16 UTC 

[v11,4/4] serial: 8250-mtk: modify uart DMA rx
 2019-03-07  1:45 UTC 

[v11,3/4] dt-bindings: dma: uart: rename binding
 2019-03-07  1:45 UTC 

[v11,2/4] arm: dts: mt2712: add uart APDMA to device tree
 2019-03-07  1:45 UTC 

[3/3] irqchip/gic-pm: use devm_clk_*() helpers
 2019-03-06 13:21 UTC 

[V3] dmaengine: axi-dmac: Split too large segments
 2019-03-06 12:21 UTC 

[V2] dmaengine: axi-dmac: Split too large segments
 2019-03-06 12:21 UTC 

[3/3] irqchip/gic-pm: use devm_clk_*() helpers
 2019-03-06 12:00 UTC 

[3/3] irqchip/gic-pm: use devm_clk_*() helpers
 2019-03-06 11:31 UTC 

[3/3] irqchip/gic-pm: use devm_clk_*() helpers
 2019-03-06 10:41 UTC 

[2/3] dmaengine: tegra210-adma: use devm_clk_*() helpers
 2019-03-06 10:41 UTC 

[1/3] bus: tegra-aconnect: use devm_clk_*() helpers
 2019-03-06 10:41 UTC 

[2/2] dmaengine: sh: rcar-dmac: Fix glitch in dmaengine_tx_status
 2019-03-05  5:56 UTC 

[v2,1/2] dmaengine: sh: rcar-dmac: With cyclic DMA residue 0 is valid
 2019-03-05  5:56 UTC 

[v2,2/2] dmaengine: fsl-dpaa2-qdma: Add NXP dpaa2 qDMA controller driver for Layerscape SoCs
 2019-03-04 17:21 UTC 

dmaengine: pl08x: be fair when re-assigning physical channel
 2019-03-04 15:03 UTC 

[2/2] dmaengine: sh: rcar-dmac: Fix glitch in dmaengine_tx_status
 2019-03-04 10:37 UTC 

[v2,2/2] dmaengine: fsl-dpaa2-qdma: Add NXP dpaa2 qDMA controller driver for Layerscape SoCs
 2019-03-04  9:10 UTC 

[v2,1/2] dmaengine: fsl-dpaa2-qdma: Add the DPDMAI(Data Path DMA Interface) support
 2019-03-04  9:10 UTC 

[2/2] dmaengine: sh: rcar-dmac: Fix glitch in dmaengine_tx_status
 2019-03-04  7:56 UTC 

[1/2] dmaengine: sh: rcar-dmac: With cyclic DMA residue 0 is valid
 2019-03-04  7:56 UTC 

dmaengine: axi-dmac: extend support for ZynqMP arch
 2019-02-28 12:39 UTC 

[V2] dmaengine: axi-dmac: Split too large segments
 2019-02-28 12:37 UTC 

[V2] dmaengine: axi-dmac: assign `copy_align` property
 2019-02-27 10:55 UTC 

[V2] dmaengine: axi-dmac: assign `copy_align` property
 2019-02-27  8:12 UTC 

[V2] dmaengine: axi-dmac: assign `copy_align` property
 2019-02-26 17:43 UTC 

[V2] dmaengine: axi-dmac: assign `copy_align` property
 2019-02-26  8:52 UTC 

[V2] dmaengine: axi-dmac: don't check the number of frames for alignment
 2019-02-26  8:48 UTC 

[1/2] dma: axi-dmac: don't check the number of frames for alignment
 2019-02-26  8:36 UTC 

dma: axi-dmac: assign `copy_align` property
 2019-02-26  8:03 UTC 

[2/2] dma: axi-dmac: report DMA_INTERLEAVE capability
 2019-02-26  8:02 UTC 

[1/2] dma: axi-dmac: don't check the number of frames for alignment
 2019-02-26  8:01 UTC 

[V2] dmaengine: axi-dmac: report DMA_INTERLEAVE capability
 2019-02-26  7:35 UTC 

dma: axi-dmac: assign `copy_align` property
 2019-02-26  7:19 UTC 

[2/2] dma: axi-dmac: report DMA_INTERLEAVE capability
 2019-02-26  7:15 UTC 


This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).