messages from 2019-05-24 00:29:03 to 2019-06-12 16:17:35 UTC [more...]
[PATCH 1/6] dma: amba-pl08x: no need to cast away call to debugfs_create_file()
2019-06-12 16:17 UTC (11+ messages)
` [PATCH 2/6] dma: bcm-sba-raid: no need to check return value of debugfs_create functions
` [PATCH 3/6] dma: coh901318: no need to cast away call to debugfs_create_file()
` [PATCH 4/6] dma: pxa_dma: no need to check return value of debugfs_create functions
` [PATCH 5/6] dma: mic_x100_dma: "
` [PATCH 6/6] dma: qcom: hidma: "
dmatest
2019-06-12 9:06 UTC
[PATCH -next] dmaengine: dw-edma: Fix build error without CONFIG_PCI_MSI
2019-06-12 4:54 UTC (2+ messages)
linux-next: Tree for Jun 11 (drivers/dma/dw-edma/)
2019-06-12 4:53 UTC (2+ messages)
[PATCH] dmaengine: dw-edma: Fix build error without CONFIG_PCI_MSI
2019-06-12 4:21 UTC (2+ messages)
[PATCH v5 00/15] add ecspi ERR009165 for i.mx6/7 soc family
2019-06-12 2:32 UTC (21+ messages)
` [PATCH v5 01/15] Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"
` [PATCH v5 02/15] Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"
` [PATCH v5 03/15] Revert "dmaengine: imx-sdma: refine to load context only once"
` [PATCH v5 04/15] dmaengine: imx-sdma: remove dupilicated sdma_load_context
` [PATCH v5 05/15] dmaengine: imx-sdma: add mcu_2_ecspi script
` [PATCH v5 06/15] spi: imx: fix ERR009165
` [PATCH v5 07/15] spi: imx: remove ERR009165 workaround on i.mx6ul
` [PATCH v5 08/15] spi: imx: add new i.mx6ul compatible name in binding doc
` [PATCH v5 09/15] dmaengine: imx-sdma: remove ERR009165 on i.mx6ul
` [PATCH v5 10/15] dma: imx-sdma: add i.mx6ul/6sx compatible name
` [PATCH v5 11/15] dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm
` [PATCH v5 12/15] ARM: dts: imx6ul: add dma support on ecspi
` [PATCH v5 13/15] ARM: dts: imx6sll: correct sdma compatible
` [PATCH v5 14/15] arm64: defconfig: Enable SDMA on i.mx8mq/8mm
` [PATCH v5 15/15] dmaengine: imx-sdma: add uart rom script
[PATCH v4] arm64: dts: allwinner: h6: Add DMA node
2019-06-11 21:40 UTC
[PATCH 00/16] dmaengine/soc/firmware: Add Texas Instruments UDMA support
2019-06-11 17:36 UTC (7+ messages)
` [PATCH 01/16] firmware: ti_sci: Add resource management APIs for ringacc, psi-l and udma
` [PATCH v1.1] "
[PATCHv2 1/2] dt-bindings: pl330: document the optional resets property
2019-06-11 15:34 UTC (2+ messages)
` [PATCHv2 2/2] dmagengine: pl330: add code to get reset property
[PATCH] dmaengine: dmatest: Add support for completion polling
2019-06-11 13:41 UTC (9+ messages)
[PATCH v3 0/7] Allwinner H6 DMA support
2019-06-11 8:28 UTC (17+ messages)
` [PATCH v3 1/7] dt-bindings: arm64: allwinner: h6: Add binding for DMA controller
` [PATCH v3 2/7] dmaengine: sun6i: Add a quirk for additional mbus clock
` [PATCH v3 3/7] dmaengine: sun6i: Add a quirk for setting DRQ fields
` [PATCH v3 4/7] dmaengine: sun6i: Add a quirk for setting mode fields
` [PATCH v3 5/7] dmaengine: sun6i: Add support for H6 DMA
` [PATCH v3 6/7] arm64: dts: allwinner: h6: Add DMA node
` [PATCH v3 7/7] arm64: defconfig: enable Allwinner DMA drivers
[PATCH 1/2] dt-bindings: pl330: document the optional resets property
2019-06-10 23:40 UTC (9+ messages)
` [PATCH 2/2] dmagengine: pl330: add code to get reset property
[V3,1/2] dmaengine: fsl-dpaa2-qdma: Add the DPDMAI(Data Path DMA Interface) support
2019-06-10 9:51 UTC (7+ messages)
` [V3,2/2] dmaengine: fsl-dpaa2-qdma: Add NXP dpaa2 qDMA controller driver for Layerscape SoCs
` [EXT] Re: [V3 2/2] "
` [EXT] Re: [V3 1/2] dmaengine: fsl-dpaa2-qdma: Add the DPDMAI(Data Path DMA Interface) support
[RFC] dmaengine: add fifo_size member
2019-06-10 8:01 UTC (39+ messages)
` [PATCH] "
[PATCH/RFC] dmaengine: Create symlinks from DMA channels to slaves
2019-06-10 7:54 UTC (2+ messages)
[PATCH trivial] dmaengine: Grammar s/the its/its/, s/need/needs/
2019-06-10 7:51 UTC (2+ messages)
[PATCH] dmaengine: axi-dmac: update license header
2019-06-10 7:49 UTC (2+ messages)
[PATCH v2 0/6] dmaengine: Add Synopsys eDMA IP driver (version 0)
2019-06-10 7:42 UTC (10+ messages)
` [PATCH v2 1/6] dmaengine: Add Synopsys eDMA IP core driver
` [PATCH v2 2/6] dmaengine: Add Synopsys eDMA IP version 0 support
` [PATCH v2 3/6] dmaengine: Add Synopsys eDMA IP version 0 debugfs support
` [PATCH v2 4/6] PCI: Add Synopsys endpoint EDDA Device ID
` [PATCH v2 5/6] dmaengine: Add Synopsys eDMA IP PCIe glue-logic
` [PATCH v2 6/6] MAINTAINERS: Add Synopsys eDMA IP driver maintainer
[GIT PULL]: dmaengine fixes for v5.2-rc4
2019-06-08 20:10 UTC (2+ messages)
[PATCH] dma: jz4780: Make probe function __init_or_module
2019-06-08 10:23 UTC (2+ messages)
[PATCH 1/4] dmaengine: virt-dma: store result on dma descriptor
2019-06-06 10:45 UTC (4+ messages)
` [PATCH 2/4] dmaengine: axi-dmac: populate residue info for completed xfers
` [PATCH 3/4] dmaengine: axi-dmac: terminate early DMA transfers after a partial one
` [PATCH 4/4] dmaengine: axi-dmac: add regmap support
[PATCH v3 0/8] add edma2 for i.mx7ulp
2019-06-05 2:29 UTC (13+ messages)
` [PATCH v3 1/8] dmaengine: fsl-edma: add dmamux_nr for next version
` [PATCH v3 2/8] dmaengine: mcf-edma: update to 'dmamux_nr'
` [PATCH v3 3/8] dmaengine: fsl-edma-common: move dmamux register to another single function
` [PATCH v3 4/8] dmaengine: fsl-edma-common: version check for v2 instead
` [PATCH v3 5/8] dmaengine: fsl-edma: add drvdata for vf610
` [PATCH v3 6/8] dt-bindings: dma: fsl-edma: add new i.mx7ulp-edma
` [PATCH v3 7/8] dmaengine: fsl-edma: add i.mx7ulp edma2 version support
` [PATCH v3 8/8] ARM: dts: imx7ulp: add edma device node
[PATCH v1] dmaengine: tegra-apb: Error out if DMA_PREP_INTERRUPT flag is unset
2019-06-04 12:16 UTC (4+ messages)
[V3 1/2] dmaengine: fsl-qdma: fixed the source/destination descriptor format
2019-06-04 12:07 UTC (4+ messages)
` [V3 2/2] dmaengine: fsl-qdma: Add improvement
[PATCH AUTOSEL 4.4 52/56] dmaengine: idma64: Use actual device for DMA transfers
2019-06-01 13:25 UTC
[PATCH v13 0/2] add uart DMA function
2019-05-30 9:34 UTC (4+ messages)
` [PATCH 2/2] serial: 8250-mtk: modify uart DMA rx
Purchase_rfq
2019-05-28 18:12 UTC
[PATCH] dmaengine: use to_platform_device()
2019-05-27 13:27 UTC (3+ messages)
[PATCH v2 0/7] Allwinner H6 DMA support
2019-05-27 12:49 UTC (11+ messages)
` [PATCH v2 1/7] dt-bindings: arm64: allwinner: h6: Add binding for DMA controller
` [PATCH v2 2/7] dmaengine: sun6i: Add a quirk for additional mbus clock
` [PATCH v2 3/7] dmaengine: sun6i: Add a quirk for setting DRQ fields
` [PATCH v2 4/7] dmaengine: sun6i: Add a quirk for setting mode fields
` [PATCH v2 5/7] dmaengine: sun6i: Add support for H6 DMA
` [PATCH v2 6/7] arm64: dts: allwinner: h6: Add DMA node
` [PATCH v2 7/7] arm64: defconfig: enable Allwinner DMA drivers
[PATCH v2 0/7] add edma2 for i.mx7ulp
2019-05-27 10:10 UTC (13+ messages)
` [PATCH v2 1/7] dmaengine: fsl-edma: add dmamux_nr for next version
` [PATCH v2 2/7] dmaengine: mcf-edma: update to 'dmamux_nr'
` [PATCH v2 3/7] dmaengine: fsl-edma-common: move dmamux register to another single function
` [PATCH v2 4/7] dmaengine: fsl-edma-common: version check for v2 instead
` [PATCH v2 5/7] dt-bindings: dma: fsl-edma: add new i.mx7ulp-edma
` [PATCH v2 6/7] dmaengine: fsl-edma: add i.mx7ulp edma2 version support
` [PATCH v2 7/7] ARM: dts: imx7ulp: add edma device node
[PATCH v1 0/6] add edma2 for i.mx7ulp
2019-05-27 7:31 UTC (4+ messages)
` [PATCH v1 4/6] dmaengine: fsl-edma: add i.mx7ulp edma2 version support
[PATCH 1/3][V3] include: fpga: adi-axi-common.h: add common regs & defs header
2019-05-27 7:06 UTC (4+ messages)
` [PATCH 2/3][V3] dmaengine: axi-dmac: Discover length alignment requirement
` [PATCH 3/3][V3] dmaengine: axi-dmac: assign `copy_align` property
[PATCH 1/3][V2] include: fpga: adi-axi-common.h: add common regs & defs header
2019-05-27 6:40 UTC (3+ messages)
[PATCH v3 0/2] dmaengine: ti: edma: Polled completion support
2019-05-27 6:39 UTC (3+ messages)
[PATCH v2 0/8] Add matching device node validation in DMA engine core
2019-05-27 5:54 UTC (2+ messages)
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).