From: Jassi Brar <jassisinghbrar@gmail.com>
To: Rob Herring <robh@kernel.org>
Cc: dmaengine@vger.kernel.org,
Devicetree List <devicetree@vger.kernel.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
vkoul@kernel.org, Mark Rutland <mark.rutland@arm.com>,
orito.takao@socionext.com,
Masami Hiramatsu <masami.hiramatsu@linaro.org>,
kasai.kazuhiro@socionext.com,
Jassi Brar <jaswinder.singh@linaro.org>
Subject: Re: [PATCH 1/2] dt-bindings: milbeaut-m10v-hdmac: Add Socionext Milbeaut HDMAC bindings
Date: Tue, 9 Jul 2019 23:12:03 -0500 [thread overview]
Message-ID: <CABb+yY3OsAh3xgX8_vvA7A7mU+FkEj__BQs9CxMvf=eYxRYXyw@mail.gmail.com> (raw)
In-Reply-To: <20190709143437.GA30850@bogus>
On Tue, Jul 9, 2019 at 9:34 AM Rob Herring <robh@kernel.org> wrote:
>
> On Wed, Jun 12, 2019 at 07:52:37PM -0500, jassisinghbrar@gmail.com wrote:
> > From: Jassi Brar <jaswinder.singh@linaro.org>
> >
> > Document the devicetree bindings for Socionext Milbeaut HDMAC
> > controller. Controller has upto 8 floating channels, that need
> > a predefined slave-id to work from a set of slaves.
> >
> > Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
> > ---
> > .../bindings/dma/milbeaut-m10v-hdmac.txt | 54 +++++++++++++++++++
> > 1 file changed, 54 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/dma/milbeaut-m10v-hdmac.txt
> >
> > diff --git a/Documentation/devicetree/bindings/dma/milbeaut-m10v-hdmac.txt b/Documentation/devicetree/bindings/dma/milbeaut-m10v-hdmac.txt
> > new file mode 100644
> > index 000000000000..a104fcb9e73d
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/dma/milbeaut-m10v-hdmac.txt
> > @@ -0,0 +1,51 @@
> > +* Milbeaut AHB DMA Controller
> > +
> > +Milbeaut AHB DMA controller has transfer capability bellow.
> > + - memory to memory transfer
> > + - device to memory transfer
> > + - memory to device transfer
> > +
> > +Required property:
> > +- compatible: Should be "socionext,milbeaut-m10v-hdmac"
> > +- reg: Should contain DMA registers location and length.
> > +- interrupts: Should contain all of the per-channel DMA interrupts.
>
> How many?
>
Each channel has an IRQ line. And the number of channels is
configurable. So instead of having some explicit property like
'dma-channels', we infer that from the number of irqs registered.
> > +- #dma-cells: Should be 1. Specify the ID of the slave.
> > +- clocks: Phandle to the clock used by the HDMAC module.
> > +
> > +
> > +Example:
> > +
> > + hdmac1: hdmac@1e110000 {
>
> dma-controller@...
>
OK
> > + compatible = "socionext,milbeaut-m10v-hdmac";
> > + reg = <0x1e110000 0x10000>;
> > + interrupts = <0 132 4>,
> > + <0 133 4>,
> > + <0 134 4>,
> > + <0 135 4>,
> > + <0 136 4>,
> > + <0 137 4>,
> > + <0 138 4>,
> > + <0 139 4>;
> > + #dma-cells = <1>;
> > + clocks = <&dummy_clk>;
> > + };
> > +
> > +* DMA client
> > +
> > +Clients have to specify the DMA requests with phandles in a list.
>
> Nothing specific to this binding here and the client side is already
> documented, so drop this section.
>
OK.
Thanks
next prev parent reply other threads:[~2019-07-10 4:12 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-13 0:51 [PATCH 0/2] Add support for AHB DMA controller on Milbeaut series jassisinghbrar
2019-06-13 0:52 ` [PATCH 1/2] dt-bindings: milbeaut-m10v-hdmac: Add Socionext Milbeaut HDMAC bindings jassisinghbrar
2019-07-09 14:34 ` Rob Herring
2019-07-10 4:12 ` Jassi Brar [this message]
2019-07-10 13:48 ` Rob Herring
2019-06-13 0:52 ` [PATCH 2/2] dmaengine: milbeaut-hdmac: Add HDMAC driver for Milbeaut platforms jassisinghbrar
2019-06-24 6:44 ` Vinod Koul
2019-08-16 2:25 ` Jassi Brar
2019-08-16 4:43 ` Vinod Koul
2019-08-18 5:16 ` [PATCH v2 0/2] Add support for AHB DMA controller on Milbeaut series jassisinghbrar
2019-08-18 5:17 ` [PATCH v2 1/2] dt-bindings: milbeaut-m10v-hdmac: Add Socionext Milbeaut HDMAC bindings jassisinghbrar
2019-08-27 16:31 ` Rob Herring
2019-09-04 5:50 ` Vinod Koul
2019-09-04 6:18 ` Jassi Brar
2019-09-06 5:12 ` Vinod Koul
2019-08-18 5:18 ` [PATCH v2 2/2] dmaengine: milbeaut-hdmac: Add HDMAC driver for Milbeaut platforms jassisinghbrar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CABb+yY3OsAh3xgX8_vvA7A7mU+FkEj__BQs9CxMvf=eYxRYXyw@mail.gmail.com' \
--to=jassisinghbrar@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=jaswinder.singh@linaro.org \
--cc=kasai.kazuhiro@socionext.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=masami.hiramatsu@linaro.org \
--cc=orito.takao@socionext.com \
--cc=robh@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).