* [BUG BISECT] Net boot fails on VF50 after "dmaengine: fsl-edma: support little endian for edma driver"
@ 2019-07-02 12:12 Krzysztof Kozłowski
2019-07-02 12:16 ` Krzysztof Kozlowski
` (2 more replies)
0 siblings, 3 replies; 10+ messages in thread
From: Krzysztof Kozłowski @ 2019-07-02 12:12 UTC (permalink / raw)
To: Peng Ma, Vinod Koul, dmaengine, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 548 bytes --]
Hi,
Bisect pointed commit:
commit 002905eca5bedab08bafd9e325bbbb41670c7712
Author: Peng Ma <peng.ma@nxp.com>
Date: Thu Jun 13 10:27:08 2019 +0000
dmaengine: fsl-edma: support little endian for edma driver
as a reason of NFSv4 root boot failures. Toradex Colibri VF50 (Cortex
A5) on Toradex Iris board.
The user-space starts but hangs - a lot of messages are missing or
seriously delayed.
Please revert the patch of fix it. If needed I can provide more
details about test system - let me know.
Full log attached.
Best regards,
Krzysztof
[-- Attachment #2: bootlog.txt --]
[-- Type: text/plain, Size: 11577 bytes --]
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.2.0-rc1-00052-g002905eca5be (krzk@PC-kkoz) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9)) #731 Tue Jul 2 14:07:36 CEST 2019
[ 0.000000] CPU: ARMv7 Processor [410fc051] revision 1 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Toradex Colibri VF50 on Colibri Evaluation Board
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] cma: Reserved 16 MiB at 0x87000000
[ 0.000000] CPU: All CPU(s) started in SVC mode.
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: ip=:::::eth0: root=/dev/nfs ubi.mtd=ubi1 console=tty1 console=ttyLP0,115200n8 consoleblank=0
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 103832K/131072K available (6144K kernel code, 197K rwdata, 1728K rodata, 1024K init, 144K bss, 10856K reserved, 16384K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] random: get_random_bytes called from start_kernel+0x288/0x418 with crng_init=0
[ 0.000056] sched_clock: 64 bits at 132MHz, resolution 7ns, wraps every 2199023255551ns
[ 0.000126] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x1e7178659b, max_idle_ns: 440795204301 ns
[ 0.000212] Switching to timer-based delay loop, resolution 7ns
[ 0.001307] Console: colour dummy device 80x30
[ 0.001900] printk: console [tty1] enabled
[ 0.001994] Calibrating delay loop (skipped), value calculated using timer frequency.. 264.00 BogoMIPS (lpj=1320000)
[ 0.002085] pid_max: default: 32768 minimum: 301
[ 0.002479] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.002588] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.004031] *** VALIDATE proc ***
[ 0.004467] *** VALIDATE cgroup1 ***
[ 0.004549] *** VALIDATE cgroup2 ***
[ 0.004748] CPU: Testing write buffer coherency: ok
[ 0.007201] Setting up static identity map for 0x80100000 - 0x80100060
[ 0.009654] devtmpfs: initialized
[ 0.022643] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1
[ 0.023499] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.023633] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.025932] pinctrl core: initialized pinctrl subsystem
[ 0.029072] NET: Registered protocol family 16
[ 0.033335] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.036355] cpuidle: using governor menu
[ 0.036762] hw-breakpoint: found 2 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.036843] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.048865] vf610-pinctrl 40048000.iomuxc: initialized IMX pinctrl driver
[ 0.144412] +V3.3: supplied by 3.3V
[ 0.146779] SCSI subsystem initialized
[ 0.147578] usbcore: registered new interface driver usbfs
[ 0.147822] usbcore: registered new interface driver hub
[ 0.148167] usbcore: registered new device driver usb
[ 0.150969] i2c i2c-0: using dma0chan0 (tx) and dma0chan1 (rx) for DMA transfers
[ 0.151079] i2c i2c-0: IMX I2C adapter registered
[ 0.151753] pps_core: LinuxPPS API ver. 1 registered
[ 0.151823] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.151973] PTP clock support registered
[ 0.155752] clocksource: Switched to clocksource arm_global_timer
[ 0.193726] NET: Registered protocol family 2
[ 0.195459] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes)
[ 0.195624] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.195721] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.195948] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.196517] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.196649] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.197279] NET: Registered protocol family 1
[ 0.199112] RPC: Registered named UNIX socket transport module.
[ 0.199210] RPC: Registered udp transport module.
[ 0.199253] RPC: Registered tcp transport module.
[ 0.199291] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.201363] hw perfevents: enabled with armv7_cortex_a5 PMU driver, 3 counters available
[ 0.204878] Initialise system trusted keyrings
[ 0.205567] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[ 0.224600] NFS: Registering the id_resolver key type
[ 0.224753] Key type id_resolver registered
[ 0.224802] Key type id_legacy registered
[ 0.224976] ntfs: driver 2.1.32 [Flags: R/W].
[ 0.226803] fuse: init (API version 7.30)
[ 0.228826] Key type asymmetric registered
[ 0.228917] Asymmetric key parser 'x509' registered
[ 0.229004] io scheduler mq-deadline registered
[ 0.229056] io scheduler kyber registered
[ 0.243446] 40027000.serial: ttyLP0 at MMIO 0x40027000 (irq = 19, base_baud = 4125000) is a FSL_LPUART
[ 0.718642] printk: console [ttyLP0] enabled
[ 0.724672] 40028000.serial: ttyLP1 at MMIO 0x40028000 (irq = 20, base_baud = 4125000) is a FSL_LPUART
[ 0.736152] 40029000.serial: ttyLP2 at MMIO 0x40029000 (irq = 21, base_baud = 4125000) is a FSL_LPUART
[ 0.750981] brd: module loaded
[ 0.776021] loop: module loaded
[ 0.782734] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
[ 0.789288] nand: Macronix NAND 128MiB 3,3V 8-bit
[ 0.794058] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 0.802176] Bad block table found at page 65472, version 0x01
[ 0.808308] Bad block table found at page 65408, version 0x01
[ 0.814355] nand_read_bbt: bad block at 0x0000013c0000
[ 0.819832] 6 fixed-partitions partitions found on MTD device vf610_nfc
[ 0.826597] Creating 6 MTD partitions on "vf610_nfc":
[ 0.831722] 0x000000000000-0x000000020000 : "vf-bcb"
[ 0.838413] 0x000000020000-0x000000180000 : "u-boot"
[ 0.844988] 0x000000180000-0x0000001c0000 : "u-boot-env"
[ 0.852132] 0x0000001c0000-0x000004080000 : "ubi1"
[ 0.859177] 0x000004080000-0x000007f40000 : "ubi2"
[ 0.866141] 0x000007f40000-0x000007f80000 : "reserved"
[ 0.877849] libphy: Fixed MDIO Bus: probed
[ 0.895255] libphy: fec_enet_mii_bus: probed
[ 0.901726] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.909279] usbcore: registered new interface driver usb-storage
[ 0.915720] usbcore: registered new interface driver usbserial_generic
[ 0.922589] usbserial: USB Serial support registered for generic
[ 0.928892] usbcore: registered new interface driver ftdi_sio
[ 0.934818] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 0.942435] usbcore: registered new interface driver pl2303
[ 0.948290] usbserial: USB Serial support registered for pl2303
[ 0.967265] snvs_rtc 400a7000.snvs:snvs-rtc-lp: registered as rtc0
[ 0.973873] i2c /dev entries driver
[ 0.982362] imx2-wdt 4003e000.wdog: timeout 60 sec (nowayout=0)
[ 0.989821] sdhci: Secure Digital Host Controller Interface driver
[ 0.996188] sdhci: Copyright(c) Pierre Ossman
[ 1.000597] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.007851] sdhci-esdhc-imx 400b2000.esdhc: Got CD GPIO
[ 1.040860] mmc0: SDHCI controller on 400b2000.esdhc [400b2000.esdhc] using ADMA
[ 1.060981] NET: Registered protocol family 17
[ 1.066026] Key type dns_resolver registered
[ 1.070612] Registering SWP/SWPB emulation handler
[ 1.077587] registered taskstats version 1
[ 1.081760] Loading compiled-in X.509 certificates
[ 1.090291] regulator-usbh-vbus GPIO handle specifies active low - ignored
[ 1.097661] VCC_USB[1-4]: supplied by 5V
[ 1.107410] ci_hdrc ci_hdrc.1: EHCI Host Controller
[ 1.112492] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
[ 1.145914] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
[ 1.153885] hub 1-0:1.0: USB hub found
[ 1.157998] hub 1-0:1.0: 1 port detected
[ 1.165981] ubi0: default fastmap pool size: 25
[ 1.170601] ubi0: default fastmap WL pool size: 12
[ 1.175431] ubi0: attaching mtd3
[ 1.205997] random: fast init done
[ 1.258665] ubi0: attached by fastmap
[ 1.262407] ubi0: fastmap pool size: 25
[ 1.266421] ubi0: fastmap WL pool size: 12
[ 1.281459] ubi0: attached mtd3 (name "ubi1", size 62 MiB)
[ 1.287166] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.294095] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.301003] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.308080] ubi0: good PEBs: 501, bad PEBs: 1, corrupted PEBs: 0
[ 1.314133] ubi0: user volume: 5, internal volumes: 1, max. volumes count: 128
[ 1.321470] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 0
[ 1.329943] ubi0: available PEBs: 0, total reserved PEBs: 501, PEBs reserved for bad PEB handling: 19
[ 1.339326] ubi0: background thread "ubi_bgt0d" started, PID 77
[ 1.346120] snvs_rtc 400a7000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01T00:00:00 UTC (0)
[ 1.361214] Micrel KSZ8041 400d1000.ethernet-1:00: attached PHY driver [Micrel KSZ8041] (mii_bus:phy_addr=400d1000.ethernet-1:00, irq=POLL)
[ 1.374935] fec 400d1000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off
[ 1.405878] Sending DHCP requests ., OK
[ 1.469786] IP-Config: Got DHCP answer from 192.168.10.1, my address is 192.168.10.17
[ 1.477763] IP-Config: Complete:
[ 1.481062] device=eth0, hwaddr=00:14:2d:2c:a1:2e, ipaddr=192.168.10.17, mask=255.255.255.0, gw=192.168.10.1
[ 1.491443] host=192.168.10.17, domain=, nis-domain=(none)
[ 1.497465] bootserver=192.168.10.1, rootserver=192.168.10.1, rootpath=/srv/nfs/colibri_vf,v4,tcp
[ 1.497483] nameserver0=192.168.10.1
[ 1.678362] VFS: Mounted root (nfs4 filesystem) on device 0:13.
[ 1.686077] usb 1-1: new high-speed USB device number 2 using ci_hdrc
[ 1.692969] devtmpfs: mounted
[ 1.704559] Freeing unused kernel memory: 1024K
[ 1.709848] Run /sbin/init as init process
[ 2.879008] systemd[1]: System time before build time, advancing clock.
[ 3.068391] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.119319] systemd[1]: systemd 232 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[ 3.139859] systemd[1]: Detected architecture arm.
[ 33.774655] systemd[1]: Set hostname to <col-vf50-proceq>.
[ 33.951009] random: systemd: uninitialized urandom read (16 bytes read)
[ 34.397842] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read)
[ 34.461872] systemd-fstab-generator[96]: Checking was requested for "ubi0:config", but it is not a device.
[ 64.512904] random: systemd: uninitialized urandom read (16 bytes read)
[ 64.565275] random: systemd: uninitialized urandom read (16 bytes read)
[ 64.573224] random: systemd: uninitialized urandom read (16 bytes read)
[ 65.717719] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 95.851417] systemd[1]: Listening on Journal Socket.
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [BUG BISECT] Net boot fails on VF50 after "dmaengine: fsl-edma: support little endian for edma driver"
2019-07-02 12:12 [BUG BISECT] Net boot fails on VF50 after "dmaengine: fsl-edma: support little endian for edma driver" Krzysztof Kozłowski
@ 2019-07-02 12:16 ` Krzysztof Kozlowski
2019-07-02 13:04 ` Fabio Estevam
2019-07-04 2:10 ` [EXT] " Peng Ma
2 siblings, 0 replies; 10+ messages in thread
From: Krzysztof Kozlowski @ 2019-07-02 12:16 UTC (permalink / raw)
To: Peng Ma, Vinod Koul, dmaengine, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 599 bytes --]
... one more time, but from proper email address:
Hi,
Bisect pointed commit:
commit 002905eca5bedab08bafd9e325bbbb41670c7712
Author: Peng Ma <peng.ma@nxp.com>
Date: Thu Jun 13 10:27:08 2019 +0000
dmaengine: fsl-edma: support little endian for edma driver
as a reason of NFSv4 root boot failures. Toradex Colibri VF50 (Cortex
A5) on Toradex Iris board.
The user-space starts but hangs - a lot of messages are missing or
seriously delayed.
Please revert the patch of fix it. If needed I can provide more
details about test system - let me know.
Full log attached.
Best regards,
Krzysztof
[-- Attachment #2: bootlog.txt --]
[-- Type: text/plain, Size: 11577 bytes --]
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.2.0-rc1-00052-g002905eca5be (krzk@PC-kkoz) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9)) #731 Tue Jul 2 14:07:36 CEST 2019
[ 0.000000] CPU: ARMv7 Processor [410fc051] revision 1 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Toradex Colibri VF50 on Colibri Evaluation Board
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] cma: Reserved 16 MiB at 0x87000000
[ 0.000000] CPU: All CPU(s) started in SVC mode.
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: ip=:::::eth0: root=/dev/nfs ubi.mtd=ubi1 console=tty1 console=ttyLP0,115200n8 consoleblank=0
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 103832K/131072K available (6144K kernel code, 197K rwdata, 1728K rodata, 1024K init, 144K bss, 10856K reserved, 16384K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] random: get_random_bytes called from start_kernel+0x288/0x418 with crng_init=0
[ 0.000056] sched_clock: 64 bits at 132MHz, resolution 7ns, wraps every 2199023255551ns
[ 0.000126] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x1e7178659b, max_idle_ns: 440795204301 ns
[ 0.000212] Switching to timer-based delay loop, resolution 7ns
[ 0.001307] Console: colour dummy device 80x30
[ 0.001900] printk: console [tty1] enabled
[ 0.001994] Calibrating delay loop (skipped), value calculated using timer frequency.. 264.00 BogoMIPS (lpj=1320000)
[ 0.002085] pid_max: default: 32768 minimum: 301
[ 0.002479] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.002588] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.004031] *** VALIDATE proc ***
[ 0.004467] *** VALIDATE cgroup1 ***
[ 0.004549] *** VALIDATE cgroup2 ***
[ 0.004748] CPU: Testing write buffer coherency: ok
[ 0.007201] Setting up static identity map for 0x80100000 - 0x80100060
[ 0.009654] devtmpfs: initialized
[ 0.022643] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1
[ 0.023499] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.023633] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.025932] pinctrl core: initialized pinctrl subsystem
[ 0.029072] NET: Registered protocol family 16
[ 0.033335] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.036355] cpuidle: using governor menu
[ 0.036762] hw-breakpoint: found 2 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.036843] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.048865] vf610-pinctrl 40048000.iomuxc: initialized IMX pinctrl driver
[ 0.144412] +V3.3: supplied by 3.3V
[ 0.146779] SCSI subsystem initialized
[ 0.147578] usbcore: registered new interface driver usbfs
[ 0.147822] usbcore: registered new interface driver hub
[ 0.148167] usbcore: registered new device driver usb
[ 0.150969] i2c i2c-0: using dma0chan0 (tx) and dma0chan1 (rx) for DMA transfers
[ 0.151079] i2c i2c-0: IMX I2C adapter registered
[ 0.151753] pps_core: LinuxPPS API ver. 1 registered
[ 0.151823] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.151973] PTP clock support registered
[ 0.155752] clocksource: Switched to clocksource arm_global_timer
[ 0.193726] NET: Registered protocol family 2
[ 0.195459] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes)
[ 0.195624] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.195721] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.195948] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.196517] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.196649] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.197279] NET: Registered protocol family 1
[ 0.199112] RPC: Registered named UNIX socket transport module.
[ 0.199210] RPC: Registered udp transport module.
[ 0.199253] RPC: Registered tcp transport module.
[ 0.199291] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.201363] hw perfevents: enabled with armv7_cortex_a5 PMU driver, 3 counters available
[ 0.204878] Initialise system trusted keyrings
[ 0.205567] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[ 0.224600] NFS: Registering the id_resolver key type
[ 0.224753] Key type id_resolver registered
[ 0.224802] Key type id_legacy registered
[ 0.224976] ntfs: driver 2.1.32 [Flags: R/W].
[ 0.226803] fuse: init (API version 7.30)
[ 0.228826] Key type asymmetric registered
[ 0.228917] Asymmetric key parser 'x509' registered
[ 0.229004] io scheduler mq-deadline registered
[ 0.229056] io scheduler kyber registered
[ 0.243446] 40027000.serial: ttyLP0 at MMIO 0x40027000 (irq = 19, base_baud = 4125000) is a FSL_LPUART
[ 0.718642] printk: console [ttyLP0] enabled
[ 0.724672] 40028000.serial: ttyLP1 at MMIO 0x40028000 (irq = 20, base_baud = 4125000) is a FSL_LPUART
[ 0.736152] 40029000.serial: ttyLP2 at MMIO 0x40029000 (irq = 21, base_baud = 4125000) is a FSL_LPUART
[ 0.750981] brd: module loaded
[ 0.776021] loop: module loaded
[ 0.782734] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
[ 0.789288] nand: Macronix NAND 128MiB 3,3V 8-bit
[ 0.794058] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 0.802176] Bad block table found at page 65472, version 0x01
[ 0.808308] Bad block table found at page 65408, version 0x01
[ 0.814355] nand_read_bbt: bad block at 0x0000013c0000
[ 0.819832] 6 fixed-partitions partitions found on MTD device vf610_nfc
[ 0.826597] Creating 6 MTD partitions on "vf610_nfc":
[ 0.831722] 0x000000000000-0x000000020000 : "vf-bcb"
[ 0.838413] 0x000000020000-0x000000180000 : "u-boot"
[ 0.844988] 0x000000180000-0x0000001c0000 : "u-boot-env"
[ 0.852132] 0x0000001c0000-0x000004080000 : "ubi1"
[ 0.859177] 0x000004080000-0x000007f40000 : "ubi2"
[ 0.866141] 0x000007f40000-0x000007f80000 : "reserved"
[ 0.877849] libphy: Fixed MDIO Bus: probed
[ 0.895255] libphy: fec_enet_mii_bus: probed
[ 0.901726] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.909279] usbcore: registered new interface driver usb-storage
[ 0.915720] usbcore: registered new interface driver usbserial_generic
[ 0.922589] usbserial: USB Serial support registered for generic
[ 0.928892] usbcore: registered new interface driver ftdi_sio
[ 0.934818] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 0.942435] usbcore: registered new interface driver pl2303
[ 0.948290] usbserial: USB Serial support registered for pl2303
[ 0.967265] snvs_rtc 400a7000.snvs:snvs-rtc-lp: registered as rtc0
[ 0.973873] i2c /dev entries driver
[ 0.982362] imx2-wdt 4003e000.wdog: timeout 60 sec (nowayout=0)
[ 0.989821] sdhci: Secure Digital Host Controller Interface driver
[ 0.996188] sdhci: Copyright(c) Pierre Ossman
[ 1.000597] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.007851] sdhci-esdhc-imx 400b2000.esdhc: Got CD GPIO
[ 1.040860] mmc0: SDHCI controller on 400b2000.esdhc [400b2000.esdhc] using ADMA
[ 1.060981] NET: Registered protocol family 17
[ 1.066026] Key type dns_resolver registered
[ 1.070612] Registering SWP/SWPB emulation handler
[ 1.077587] registered taskstats version 1
[ 1.081760] Loading compiled-in X.509 certificates
[ 1.090291] regulator-usbh-vbus GPIO handle specifies active low - ignored
[ 1.097661] VCC_USB[1-4]: supplied by 5V
[ 1.107410] ci_hdrc ci_hdrc.1: EHCI Host Controller
[ 1.112492] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
[ 1.145914] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
[ 1.153885] hub 1-0:1.0: USB hub found
[ 1.157998] hub 1-0:1.0: 1 port detected
[ 1.165981] ubi0: default fastmap pool size: 25
[ 1.170601] ubi0: default fastmap WL pool size: 12
[ 1.175431] ubi0: attaching mtd3
[ 1.205997] random: fast init done
[ 1.258665] ubi0: attached by fastmap
[ 1.262407] ubi0: fastmap pool size: 25
[ 1.266421] ubi0: fastmap WL pool size: 12
[ 1.281459] ubi0: attached mtd3 (name "ubi1", size 62 MiB)
[ 1.287166] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.294095] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.301003] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.308080] ubi0: good PEBs: 501, bad PEBs: 1, corrupted PEBs: 0
[ 1.314133] ubi0: user volume: 5, internal volumes: 1, max. volumes count: 128
[ 1.321470] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 0
[ 1.329943] ubi0: available PEBs: 0, total reserved PEBs: 501, PEBs reserved for bad PEB handling: 19
[ 1.339326] ubi0: background thread "ubi_bgt0d" started, PID 77
[ 1.346120] snvs_rtc 400a7000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01T00:00:00 UTC (0)
[ 1.361214] Micrel KSZ8041 400d1000.ethernet-1:00: attached PHY driver [Micrel KSZ8041] (mii_bus:phy_addr=400d1000.ethernet-1:00, irq=POLL)
[ 1.374935] fec 400d1000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off
[ 1.405878] Sending DHCP requests ., OK
[ 1.469786] IP-Config: Got DHCP answer from 192.168.10.1, my address is 192.168.10.17
[ 1.477763] IP-Config: Complete:
[ 1.481062] device=eth0, hwaddr=00:14:2d:2c:a1:2e, ipaddr=192.168.10.17, mask=255.255.255.0, gw=192.168.10.1
[ 1.491443] host=192.168.10.17, domain=, nis-domain=(none)
[ 1.497465] bootserver=192.168.10.1, rootserver=192.168.10.1, rootpath=/srv/nfs/colibri_vf,v4,tcp
[ 1.497483] nameserver0=192.168.10.1
[ 1.678362] VFS: Mounted root (nfs4 filesystem) on device 0:13.
[ 1.686077] usb 1-1: new high-speed USB device number 2 using ci_hdrc
[ 1.692969] devtmpfs: mounted
[ 1.704559] Freeing unused kernel memory: 1024K
[ 1.709848] Run /sbin/init as init process
[ 2.879008] systemd[1]: System time before build time, advancing clock.
[ 3.068391] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.119319] systemd[1]: systemd 232 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[ 3.139859] systemd[1]: Detected architecture arm.
[ 33.774655] systemd[1]: Set hostname to <col-vf50-proceq>.
[ 33.951009] random: systemd: uninitialized urandom read (16 bytes read)
[ 34.397842] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read)
[ 34.461872] systemd-fstab-generator[96]: Checking was requested for "ubi0:config", but it is not a device.
[ 64.512904] random: systemd: uninitialized urandom read (16 bytes read)
[ 64.565275] random: systemd: uninitialized urandom read (16 bytes read)
[ 64.573224] random: systemd: uninitialized urandom read (16 bytes read)
[ 65.717719] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 95.851417] systemd[1]: Listening on Journal Socket.
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [BUG BISECT] Net boot fails on VF50 after "dmaengine: fsl-edma: support little endian for edma driver"
2019-07-02 12:12 [BUG BISECT] Net boot fails on VF50 after "dmaengine: fsl-edma: support little endian for edma driver" Krzysztof Kozłowski
2019-07-02 12:16 ` Krzysztof Kozlowski
@ 2019-07-02 13:04 ` Fabio Estevam
2019-07-02 13:10 ` Krzysztof Kozlowski
2019-07-04 2:10 ` [EXT] " Peng Ma
2 siblings, 1 reply; 10+ messages in thread
From: Fabio Estevam @ 2019-07-02 13:04 UTC (permalink / raw)
To: Krzysztof Kozłowski; +Cc: Peng Ma, Vinod Koul, dmaengine, linux-kernel
Hi Krzysztof,
On Tue, Jul 2, 2019 at 9:13 AM Krzysztof Kozłowski
<k.kozlowski.k@gmail.com> wrote:
>
> Hi,
>
> Bisect pointed commit:
> commit 002905eca5bedab08bafd9e325bbbb41670c7712
> Author: Peng Ma <peng.ma@nxp.com>
> Date: Thu Jun 13 10:27:08 2019 +0000
> dmaengine: fsl-edma: support little endian for edma driver
>
> as a reason of NFSv4 root boot failures. Toradex Colibri VF50 (Cortex
> A5) on Toradex Iris board.
>
> The user-space starts but hangs - a lot of messages are missing or
> seriously delayed.
>
> Please revert the patch of fix it. If needed I can provide more
> details about test system - let me know.
>
> Full log attached.
Does this fix the problem?
--- a/arch/arm/boot/dts/vfxxx.dtsi
+++ b/arch/arm/boot/dts/vfxxx.dtsi
@@ -92,6 +92,7 @@
clock-names = "dmamux0", "dmamux1";
clocks = <&clks VF610_CLK_DMAMUX0>,
<&clks VF610_CLK_DMAMUX1>;
+ big-endian;
status = "disabled";
};
@@ -491,6 +492,7 @@
clock-names = "dmamux0", "dmamux1";
clocks = <&clks VF610_CLK_DMAMUX2>,
<&clks VF610_CLK_DMAMUX3>;
+ big-endian;
status = "disabled";
};
I am not saying this is the proper fix as we should not break old dtb's.
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [BUG BISECT] Net boot fails on VF50 after "dmaengine: fsl-edma: support little endian for edma driver"
2019-07-02 13:04 ` Fabio Estevam
@ 2019-07-02 13:10 ` Krzysztof Kozlowski
2019-07-02 14:18 ` Fabio Estevam
0 siblings, 1 reply; 10+ messages in thread
From: Krzysztof Kozlowski @ 2019-07-02 13:10 UTC (permalink / raw)
To: Fabio Estevam; +Cc: Peng Ma, Vinod Koul, dmaengine, linux-kernel
On Tue, 2 Jul 2019 at 15:04, Fabio Estevam <festevam@gmail.com> wrote:
>
> Hi Krzysztof,
>
> On Tue, Jul 2, 2019 at 9:13 AM Krzysztof Kozłowski
> <k.kozlowski.k@gmail.com> wrote:
> >
> > Hi,
> >
> > Bisect pointed commit:
> > commit 002905eca5bedab08bafd9e325bbbb41670c7712
> > Author: Peng Ma <peng.ma@nxp.com>
> > Date: Thu Jun 13 10:27:08 2019 +0000
> > dmaengine: fsl-edma: support little endian for edma driver
> >
> > as a reason of NFSv4 root boot failures. Toradex Colibri VF50 (Cortex
> > A5) on Toradex Iris board.
> >
> > The user-space starts but hangs - a lot of messages are missing or
> > seriously delayed.
> >
> > Please revert the patch of fix it. If needed I can provide more
> > details about test system - let me know.
> >
> > Full log attached.
>
> Does this fix the problem?
>
> --- a/arch/arm/boot/dts/vfxxx.dtsi
> +++ b/arch/arm/boot/dts/vfxxx.dtsi
> @@ -92,6 +92,7 @@
> clock-names = "dmamux0", "dmamux1";
> clocks = <&clks VF610_CLK_DMAMUX0>,
> <&clks VF610_CLK_DMAMUX1>;
> + big-endian;
> status = "disabled";
> };
>
> @@ -491,6 +492,7 @@
> clock-names = "dmamux0", "dmamux1";
> clocks = <&clks VF610_CLK_DMAMUX2>,
> <&clks VF610_CLK_DMAMUX3>;
> + big-endian;
> status = "disabled";
> };
>
> I am not saying this is the proper fix as we should not break old dtb's.
Hi,
No, unfortunately it does not help.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [BUG BISECT] Net boot fails on VF50 after "dmaengine: fsl-edma: support little endian for edma driver"
2019-07-02 13:10 ` Krzysztof Kozlowski
@ 2019-07-02 14:18 ` Fabio Estevam
0 siblings, 0 replies; 10+ messages in thread
From: Fabio Estevam @ 2019-07-02 14:18 UTC (permalink / raw)
To: Krzysztof Kozlowski; +Cc: Peng Ma, Vinod Koul, dmaengine, linux-kernel
On Tue, Jul 2, 2019 at 10:11 AM Krzysztof Kozlowski <krzk@kernel.org> wrote:
> No, unfortunately it does not help.
Just looked at "dmaengine: fsl-edma: support little endian for edma
driver" more closely and this one assumes that there wasn't
little-endian support originally, which is incorrect.
Vybryd, i.MX7ULP uses edma in little-endian mode, so I think that we
should revert it.
Thanks
^ permalink raw reply [flat|nested] 10+ messages in thread
* RE: [EXT] [BUG BISECT] Net boot fails on VF50 after "dmaengine: fsl-edma: support little endian for edma driver"
2019-07-02 12:12 [BUG BISECT] Net boot fails on VF50 after "dmaengine: fsl-edma: support little endian for edma driver" Krzysztof Kozłowski
2019-07-02 12:16 ` Krzysztof Kozlowski
2019-07-02 13:04 ` Fabio Estevam
@ 2019-07-04 2:10 ` Peng Ma
2019-07-04 12:06 ` Fabio Estevam
2019-07-04 12:57 ` Krzysztof Kozlowski
2 siblings, 2 replies; 10+ messages in thread
From: Peng Ma @ 2019-07-04 2:10 UTC (permalink / raw)
To: Krzysztof Kozłowski, Vinod Koul, dmaengine, linux-kernel
Cc: Fabio Estevam, Leo Li, Andy Tang
[-- Attachment #1: Type: text/plain, Size: 2708 bytes --]
Hi Krzysztof,
I am sorry, It is my mistake to forget about VF50 used EDMA IP with little endian.
The Register(CHCFG0 - CHCFG15) of our platform designed as follows:
*-------------------------------------------------------------------------------*
| Offset | Big endian Register| Little endian Register|
|---------------------|--------------------------|-----------------------------|
| 0x0 | CHCFG0 | CHCFG3 |
|---------------------|--------------------------|-----------------------------|
| 0x1 | CHCFG1 | CHCFG2 |
|---------------------|--------------------------|-----------------------------|
| 0x2 | CHCFG2 | CHCFG1 |
|---------------------|--------------------------|-----------------------------|
| 0x3 | CHCFG3 | CHCFG0 |
|---------------------|--------------------------|-----------------------------|
| ... | ...... | ...... |
|---------------------|--------------------------|-----------------------------|
| 0xC | CHCFG12 | CHCFG15 |
|---------------------|--------------------------|-----------------------------|
| 0xD | CHCFG13 | CHCFG14 |
|---------------------|--------------------------|-----------------------------|
| 0xE | CHCFG14 | CHCFG13 |
|---------------------|--------------------------|-----------------------------|
| 0xF | CHCFG15 | CHCFG12 |
*-------------------------------------------------------------------------------*
So we need this patch, I make some changes,Please help me to test attatchment on VF50 board,
Thanks.
Best Regards,
Peng
>-----Original Message-----
>From: Krzysztof Kozłowski <k.kozlowski.k@gmail.com>
>Sent: 2019年7月2日 20:13
>To: Peng Ma <peng.ma@nxp.com>; Vinod Koul <vkoul@kernel.org>;
>dmaengine@vger.kernel.org; linux-kernel@vger.kernel.org
>Subject: [EXT] [BUG BISECT] Net boot fails on VF50 after "dmaengine:
>fsl-edma: support little endian for edma driver"
>
>Caution: EXT Email
>
>Hi,
>
>Bisect pointed commit:
>commit 002905eca5bedab08bafd9e325bbbb41670c7712
>Author: Peng Ma <peng.ma@nxp.com>
>Date: Thu Jun 13 10:27:08 2019 +0000
> dmaengine: fsl-edma: support little endian for edma driver
>
>as a reason of NFSv4 root boot failures. Toradex Colibri VF50 (Cortex
>A5) on Toradex Iris board.
>
>The user-space starts but hangs - a lot of messages are missing or seriously
>delayed.
>
>Please revert the patch of fix it. If needed I can provide more details about test
>system - let me know.
>
>Full log attached.
>
>Best regards,
>Krzysztof
[-- Attachment #2: 0001-dmaengine-fsl-edma-support-little-endian-for-edma-dr.patch --]
[-- Type: application/octet-stream, Size: 3060 bytes --]
From 95031d3e00a07bbfe1c987f28a4b468243799ac6 Mon Sep 17 00:00:00 2001
From: Peng Ma <peng.ma@nxp.com>
Date: Thu, 13 Jun 2019 10:27:08 +0000
Subject: [PATCH] dmaengine: fsl-edma: support little endian for edma driver
Our platforms with below registers(CHCFG0 - CHCFG15) of eDMA
*-----------------------------------------------------------*
| Offset | Big endian Register| Little endian Register|
|--------------|--------------------|-----------------------|
| 0x0 | CHCFG0 | CHCFG3 |
|--------------|--------------------|-----------------------|
| 0x1 | CHCFG1 | CHCFG2 |
|--------------|--------------------|-----------------------|
| 0x2 | CHCFG2 | CHCFG1 |
|--------------|--------------------|-----------------------|
| 0x3 | CHCFG3 | CHCFG0 |
|--------------|--------------------|-----------------------|
| ... | ...... | ...... |
|--------------|--------------------|-----------------------|
| 0xC | CHCFG12 | CHCFG15 |
|--------------|--------------------|-----------------------|
| 0xD | CHCFG13 | CHCFG14 |
|--------------|--------------------|-----------------------|
| 0xE | CHCFG14 | CHCFG13 |
|--------------|--------------------|-----------------------|
| 0xF | CHCFG15 | CHCFG12 |
*-----------------------------------------------------------*
Current eDMA driver does not support Little endian, so this
patch is to improve edma driver to support little endian.
Signed-off-by: Peng Ma <peng.ma@nxp.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
drivers/dma/fsl-edma-common.c | 12 ++++++++++++
1 files changed, 12 insertions(+), 0 deletions(-)
diff --git a/drivers/dma/fsl-edma-common.c b/drivers/dma/fsl-edma-common.c
index 680b2a0..f30c203 100644
--- a/drivers/dma/fsl-edma-common.c
+++ b/drivers/dma/fsl-edma-common.c
@@ -7,6 +7,7 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/dma-mapping.h>
+#include <linux/sys_soc.h>
#include "fsl-edma-common.h"
@@ -42,6 +43,11 @@
#define EDMA_TCD 0x1000
+struct soc_device_attribute soc_fixup_tuning[] = {
+ { .family = "QorIQ LS1028A"},
+ { },
+};
+
static void fsl_edma_enable_request(struct fsl_edma_chan *fsl_chan)
{
struct edma_regs *regs = &fsl_chan->edma->regs;
@@ -83,9 +89,15 @@ void fsl_edma_chan_mux(struct fsl_edma_chan *fsl_chan,
u32 ch = fsl_chan->vchan.chan.chan_id;
void __iomem *muxaddr;
unsigned int chans_per_mux, ch_off;
+ int endian_diff[4] = {3, 1, -1, -3};
chans_per_mux = fsl_chan->edma->n_chans / DMAMUX_NR;
ch_off = fsl_chan->vchan.chan.chan_id % chans_per_mux;
+
+ if (!fsl_chan->edma->big_endian &&
+ soc_device_match(soc_fixup_tuning))
+ ch_off += endian_diff[ch_off % 4];
+
muxaddr = fsl_chan->edma->muxbase[ch / chans_per_mux];
slot = EDMAMUX_CHCFG_SOURCE(slot);
--
1.7.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: [EXT] [BUG BISECT] Net boot fails on VF50 after "dmaengine: fsl-edma: support little endian for edma driver"
2019-07-04 2:10 ` [EXT] " Peng Ma
@ 2019-07-04 12:06 ` Fabio Estevam
2019-07-05 2:02 ` Peng Ma
2019-07-04 12:57 ` Krzysztof Kozlowski
1 sibling, 1 reply; 10+ messages in thread
From: Fabio Estevam @ 2019-07-04 12:06 UTC (permalink / raw)
To: Peng Ma
Cc: Krzysztof Kozłowski, Vinod Koul, dmaengine, linux-kernel,
Fabio Estevam, Leo Li, Andy Tang
Hi Peng,
On Wed, Jul 3, 2019 at 11:10 PM Peng Ma <peng.ma@nxp.com> wrote:
> So we need this patch, I make some changes,Please help me to test attatchment on VF50 board,
You need to change the Subject to something like:
Subject: [PATCH] dmaengine: fsl-edma: Add support for LS1028A
Also, in the commit log, please change "Our platforms" to "LS1028A"
Please remove this part: "Current eDMA driver does not support Little endian"
,which is not correct.
^ permalink raw reply [flat|nested] 10+ messages in thread
* RE: [EXT] [BUG BISECT] Net boot fails on VF50 after "dmaengine: fsl-edma: support little endian for edma driver"
2019-07-04 12:06 ` Fabio Estevam
@ 2019-07-05 2:02 ` Peng Ma
0 siblings, 0 replies; 10+ messages in thread
From: Peng Ma @ 2019-07-05 2:02 UTC (permalink / raw)
To: Fabio Estevam
Cc: Krzysztof Kozłowski, Vinod Koul, dmaengine, linux-kernel,
Fabio Estevam, Leo Li, Andy Tang
Hi Fabio,
Thanks very much for your suggestion, I will do some changes then to
Send upstream review.
Best Regards,
Peng
>-----Original Message-----
>From: Fabio Estevam <festevam@gmail.com>
>Sent: 2019年7月4日 20:07
>To: Peng Ma <peng.ma@nxp.com>
>Cc: Krzysztof Kozłowski <k.kozlowski.k@gmail.com>; Vinod Koul
><vkoul@kernel.org>; dmaengine@vger.kernel.org;
>linux-kernel@vger.kernel.org; Fabio Estevam <fabio.estevam@nxp.com>; Leo
>Li <leoyang.li@nxp.com>; Andy Tang <andy.tang@nxp.com>
>Subject: Re: [EXT] [BUG BISECT] Net boot fails on VF50 after "dmaengine:
>fsl-edma: support little endian for edma driver"
>
>Caution: EXT Email
>
>Hi Peng,
>
>On Wed, Jul 3, 2019 at 11:10 PM Peng Ma <peng.ma@nxp.com> wrote:
>
>> So we need this patch, I make some changes,Please help me to test
>attatchment on VF50 board,
>
>You need to change the Subject to something like:
>
>Subject: [PATCH] dmaengine: fsl-edma: Add support for LS1028A
>
>Also, in the commit log, please change "Our platforms" to "LS1028A"
>
>Please remove this part: "Current eDMA driver does not support Little endian"
>
>,which is not correct.
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [EXT] [BUG BISECT] Net boot fails on VF50 after "dmaengine: fsl-edma: support little endian for edma driver"
2019-07-04 2:10 ` [EXT] " Peng Ma
2019-07-04 12:06 ` Fabio Estevam
@ 2019-07-04 12:57 ` Krzysztof Kozlowski
2019-07-05 2:04 ` Peng Ma
1 sibling, 1 reply; 10+ messages in thread
From: Krzysztof Kozlowski @ 2019-07-04 12:57 UTC (permalink / raw)
To: Peng Ma
Cc: Vinod Koul, dmaengine, linux-kernel, Fabio Estevam, Leo Li, Andy Tang
On Thu, 4 Jul 2019 at 04:10, Peng Ma <peng.ma@nxp.com> wrote:
>
> Hi Krzysztof,
>
> I am sorry, It is my mistake to forget about VF50 used EDMA IP with little endian.
> The Register(CHCFG0 - CHCFG15) of our platform designed as follows:
> *-------------------------------------------------------------------------------*
> | Offset | Big endian Register| Little endian Register|
> |---------------------|--------------------------|-----------------------------|
> | 0x0 | CHCFG0 | CHCFG3 |
> |---------------------|--------------------------|-----------------------------|
> | 0x1 | CHCFG1 | CHCFG2 |
> |---------------------|--------------------------|-----------------------------|
> | 0x2 | CHCFG2 | CHCFG1 |
> |---------------------|--------------------------|-----------------------------|
> | 0x3 | CHCFG3 | CHCFG0 |
> |---------------------|--------------------------|-----------------------------|
> | ... | ...... | ...... |
> |---------------------|--------------------------|-----------------------------|
> | 0xC | CHCFG12 | CHCFG15 |
> |---------------------|--------------------------|-----------------------------|
> | 0xD | CHCFG13 | CHCFG14 |
> |---------------------|--------------------------|-----------------------------|
> | 0xE | CHCFG14 | CHCFG13 |
> |---------------------|--------------------------|-----------------------------|
> | 0xF | CHCFG15 | CHCFG12 |
> *-------------------------------------------------------------------------------*
>
> So we need this patch, I make some changes,Please help me to test attatchment on VF50 board,
> Thanks.
With the patch VF50 boots fine.
BTW, Colibri VF50 nicely boots from network almost out of the box so
it is easy to add it to automated tests for simple boot tests. This
way you do not have to manually test it on such platform...
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 10+ messages in thread
* RE: [EXT] [BUG BISECT] Net boot fails on VF50 after "dmaengine: fsl-edma: support little endian for edma driver"
2019-07-04 12:57 ` Krzysztof Kozlowski
@ 2019-07-05 2:04 ` Peng Ma
0 siblings, 0 replies; 10+ messages in thread
From: Peng Ma @ 2019-07-05 2:04 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Vinod Koul, dmaengine, linux-kernel, Fabio Estevam, Leo Li, Andy Tang
Hi Krzysztof,
Got it. Thanks for your help
Best Regards,
Peng
>-----Original Message-----
>From: Krzysztof Kozlowski <krzk@kernel.org>
>Sent: 2019年7月4日 20:57
>To: Peng Ma <peng.ma@nxp.com>
>Cc: Vinod Koul <vkoul@kernel.org>; dmaengine@vger.kernel.org;
>linux-kernel@vger.kernel.org; Fabio Estevam <fabio.estevam@nxp.com>; Leo
>Li <leoyang.li@nxp.com>; Andy Tang <andy.tang@nxp.com>
>Subject: Re: [EXT] [BUG BISECT] Net boot fails on VF50 after "dmaengine:
>fsl-edma: support little endian for edma driver"
>
>Caution: EXT Email
>
>On Thu, 4 Jul 2019 at 04:10, Peng Ma <peng.ma@nxp.com> wrote:
>>
>> Hi Krzysztof,
>>
>> I am sorry, It is my mistake to forget about VF50 used EDMA IP with little
>endian.
>> The Register(CHCFG0 - CHCFG15) of our platform designed as follows:
>> *---------------------------------------------------------------------
>> ----------*
>> | Offset | Big endian Register| Little endian Register|
>> |---------------------|--------------------------|-----------------------------|
>> | 0x0 | CHCFG0 | CHCFG3 |
>> |---------------------|--------------------------|-----------------------------|
>> | 0x1 | CHCFG1 | CHCFG2 |
>> |---------------------|--------------------------|-----------------------------|
>> | 0x2 | CHCFG2 | CHCFG1 |
>> |---------------------|--------------------------|-----------------------------|
>> | 0x3 | CHCFG3 | CHCFG0 |
>> |---------------------|--------------------------|-----------------------------|
>> | ... | ...... | ...... |
>> |---------------------|--------------------------|-----------------------------|
>> | 0xC | CHCFG12 | CHCFG15 |
>> |---------------------|--------------------------|-----------------------------|
>> | 0xD | CHCFG13 | CHCFG14 |
>> |---------------------|--------------------------|-----------------------------|
>> | 0xE | CHCFG14 | CHCFG13 |
>> |---------------------|--------------------------|-----------------------------|
>> | 0xF | CHCFG15 | CHCFG12 |
>> *---------------------------------------------------------------------
>> ----------*
>>
>> So we need this patch, I make some changes,Please help me to test
>> attatchment on VF50 board, Thanks.
>
>With the patch VF50 boots fine.
>
>BTW, Colibri VF50 nicely boots from network almost out of the box so it is easy
>to add it to automated tests for simple boot tests. This way you do not have to
>manually test it on such platform...
>
>Best regards,
>Krzysztof
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2019-07-05 2:05 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-07-02 12:12 [BUG BISECT] Net boot fails on VF50 after "dmaengine: fsl-edma: support little endian for edma driver" Krzysztof Kozłowski
2019-07-02 12:16 ` Krzysztof Kozlowski
2019-07-02 13:04 ` Fabio Estevam
2019-07-02 13:10 ` Krzysztof Kozlowski
2019-07-02 14:18 ` Fabio Estevam
2019-07-04 2:10 ` [EXT] " Peng Ma
2019-07-04 12:06 ` Fabio Estevam
2019-07-05 2:02 ` Peng Ma
2019-07-04 12:57 ` Krzysztof Kozlowski
2019-07-05 2:04 ` Peng Ma
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).