dmaengine Archive on lore.kernel.org
 help / color / Atom feed
From: Gustavo Pimentel <Gustavo.Pimentel@synopsys.com>
To: linux-pci@vger.kernel.org, dmaengine@vger.kernel.org
Cc: Gustavo Pimentel <Gustavo.Pimentel@synopsys.com>
Subject: [PATCH v2 0/6] dmaengine: Add Synopsys eDMA IP driver (version 0)
Date: Tue,  4 Jun 2019 15:29:21 +0200
Message-ID: <cover.1559654565.git.gustavo.pimentel@synopsys.com> (raw)

Add Synopsys eDMA IP driver (version 0 and for EP side only) to Linux
kernel. This IP is generally distributed with Synopsys PCIe EndPoint IP
(depends of the use and licensing agreement), which supports:
 - legacy and unroll modes
 - 16 independent and concurrent channels (8 write + 8 read)
 - supports linked list (scatter-gather) transfer
 - each linked list descriptor can transfer from 1 byte to 4 Gbytes
 - supports cyclic transfer
 - PCIe EndPoint glue-logic

This patch series contains:
 - eDMA core + eDMA core v0 driver (implements the interface with
 DMAengine controller APIs and interfaces with eDMA HW block)
 - eDMA PCIe glue-logic reference driver (attaches to Synopsys EP and
 provides memory access to eDMA core driver)

Gustavo Pimentel (6):
  dmaengine: Add Synopsys eDMA IP core driver
  dmaengine: Add Synopsys eDMA IP version 0 support
  dmaengine: Add Synopsys eDMA IP version 0 debugfs support
  PCI: Add Synopsys endpoint EDDA Device ID
  dmaengine: Add Synopsys eDMA IP PCIe glue-logic
  MAINTAINERS: Add Synopsys eDMA IP driver maintainer

 MAINTAINERS                              |   7 +
 drivers/dma/Kconfig                      |   2 +
 drivers/dma/Makefile                     |   1 +
 drivers/dma/dw-edma/Kconfig              |  18 +
 drivers/dma/dw-edma/Makefile             |   7 +
 drivers/dma/dw-edma/dw-edma-core.c       | 937 +++++++++++++++++++++++++++++++
 drivers/dma/dw-edma/dw-edma-core.h       | 165 ++++++
 drivers/dma/dw-edma/dw-edma-pcie.c       | 229 ++++++++
 drivers/dma/dw-edma/dw-edma-v0-core.c    | 354 ++++++++++++
 drivers/dma/dw-edma/dw-edma-v0-core.h    |  28 +
 drivers/dma/dw-edma/dw-edma-v0-debugfs.c | 310 ++++++++++
 drivers/dma/dw-edma/dw-edma-v0-debugfs.h |  27 +
 drivers/dma/dw-edma/dw-edma-v0-regs.h    | 158 ++++++
 drivers/misc/pci_endpoint_test.c         |   2 +-
 include/linux/dma/edma.h                 |  47 ++
 include/linux/pci_ids.h                  |   1 +
 16 files changed, 2292 insertions(+), 1 deletion(-)
 create mode 100644 drivers/dma/dw-edma/Kconfig
 create mode 100644 drivers/dma/dw-edma/Makefile
 create mode 100644 drivers/dma/dw-edma/dw-edma-core.c
 create mode 100644 drivers/dma/dw-edma/dw-edma-core.h
 create mode 100644 drivers/dma/dw-edma/dw-edma-pcie.c
 create mode 100644 drivers/dma/dw-edma/dw-edma-v0-core.c
 create mode 100644 drivers/dma/dw-edma/dw-edma-v0-core.h
 create mode 100644 drivers/dma/dw-edma/dw-edma-v0-debugfs.c
 create mode 100644 drivers/dma/dw-edma/dw-edma-v0-debugfs.h
 create mode 100644 drivers/dma/dw-edma/dw-edma-v0-regs.h
 create mode 100644 include/linux/dma/edma.h

-- 
2.7.4


             reply index

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-04 13:29 Gustavo Pimentel [this message]
2019-06-04 13:29 ` [PATCH v2 1/6] dmaengine: Add Synopsys eDMA IP core driver Gustavo Pimentel
2019-06-04 13:29 ` [PATCH v2 2/6] dmaengine: Add Synopsys eDMA IP version 0 support Gustavo Pimentel
2019-06-04 13:29 ` [PATCH v2 3/6] dmaengine: Add Synopsys eDMA IP version 0 debugfs support Gustavo Pimentel
2019-06-04 13:29 ` [PATCH v2 4/6] PCI: Add Synopsys endpoint EDDA Device ID Gustavo Pimentel
2019-06-04 13:29 ` [PATCH v2 5/6] dmaengine: Add Synopsys eDMA IP PCIe glue-logic Gustavo Pimentel
2019-06-04 13:29 ` [PATCH v2 6/6] MAINTAINERS: Add Synopsys eDMA IP driver maintainer Gustavo Pimentel
2019-06-04 19:40 ` [PATCH v2 0/6] dmaengine: Add Synopsys eDMA IP driver (version 0) Bjorn Helgaas
2019-06-05  8:14   ` Gustavo Pimentel
2019-06-10  7:42 ` Vinod Koul

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=cover.1559654565.git.gustavo.pimentel@synopsys.com \
    --to=gustavo.pimentel@synopsys.com \
    --cc=dmaengine@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

dmaengine Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/dmaengine/0 dmaengine/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dmaengine dmaengine/ https://lore.kernel.org/dmaengine \
		dmaengine@vger.kernel.org dmaengine@archiver.kernel.org
	public-inbox-index dmaengine


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.dmaengine


AGPL code for this site: git clone https://public-inbox.org/ public-inbox