dmaengine Archive on lore.kernel.org
 help / color / Atom feed
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: Rob Herring <robh@kernel.org>
Cc: <vkoul@kernel.org>, <dmaengine@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <dan.j.williams@intel.com>,
	<devicetree@vger.kernel.org>
Subject: Re: [PATCH v2 1/3] dt-bindings: dmaengine: dma-common: Change dma-channel-mask to uint32-array
Date: Wed, 18 Sep 2019 17:04:50 +0300
Message-ID: <d76ffc38-8e68-656a-325b-37de9b01e015@ti.com> (raw)
In-Reply-To: <20190918132835.GA4527@bogus>



On 18/09/2019 16.28, Rob Herring wrote:
> On Tue, Sep 10, 2019 at 02:45:57PM +0300, Peter Ujfalusi wrote:
>> Make the dma-channel-mask to be usable for controllers with more than 32
>> channels.
>>
>> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
>> ---
>>  Documentation/devicetree/bindings/dma/dma-common.yaml | 10 +++++++++-
>>  1 file changed, 9 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/dma/dma-common.yaml b/Documentation/devicetree/bindings/dma/dma-common.yaml
>> index ed0a49a6f020..41460946be64 100644
>> --- a/Documentation/devicetree/bindings/dma/dma-common.yaml
>> +++ b/Documentation/devicetree/bindings/dma/dma-common.yaml
>> @@ -25,11 +25,19 @@ properties:
>>        Used to provide DMA controller specific information.
>>  
>>    dma-channel-mask:
>> -    $ref: /schemas/types.yaml#definitions/uint32
>>      description:
>>        Bitmask of available DMA channels in ascending order that are
>>        not reserved by firmware and are available to the
>>        kernel. i.e. first channel corresponds to LSB.
>> +    allOf:
>> +      - $ref: /schemas/types.yaml#/definitions/uint32-array
>> +        items:
>> +          minItems = 1
> 
> '='? Just making up the syntax?

Opps, sorry.

> 
>> +          maxItems = 255 # Should be enough
>> +          - description: Mask of channels 0-31
>> +          - description: Mask of channels 32-63
> 
> You are mixing a schema and list here...

Should I extend the description with something like this:
"The first item in the array is for channels 0-31, the second is for
channels 32-63, etc."

To make sure that it is used in a correct and consistent manner.

>> +          ...
> 
> That's end of doc marker in YAML...

I believe I need some reading to do for YAML..

> 
>> +          - description: Mask of chnanels X-(X+31)
> 
> Obviously, this was not validated with 'make dt_binding_check'.
make dt_bindings_check
make: *** No rule to make target 'dt_bindings_check'.  Stop.

> What you  want is:
> 
>     allOf:
>       - $ref: /schemas/types.yaml#/definitions/uint32-array
>       - minItems: 1
>         maxItems: 255 # Should be enough

OK and thanks for the comments.

- Péter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

  reply index

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-10 11:45 [PATCH v2 0/3] dmaengine: bindings/edma: dma-channel-mask to array Peter Ujfalusi
2019-09-10 11:45 ` [PATCH v2 1/3] dt-bindings: dmaengine: dma-common: Change dma-channel-mask to uint32-array Peter Ujfalusi
2019-09-18 13:28   ` Rob Herring
2019-09-18 14:04     ` Peter Ujfalusi [this message]
2019-09-18 14:21       ` Rob Herring
2019-09-19  8:42         ` Peter Ujfalusi
2019-09-10 11:45 ` [PATCH v2 2/3] dt-bindings: dma: ti-edma: Document dma-channel-mask for EDMA Peter Ujfalusi
2019-09-18 13:29   ` Rob Herring
2019-09-18 14:06     ` Peter Ujfalusi
2019-09-10 11:45 ` [PATCH v2 3/3] dmaengine: ti: edma: Add support for handling reserved channels Peter Ujfalusi

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=d76ffc38-8e68-656a-325b-37de9b01e015@ti.com \
    --to=peter.ujfalusi@ti.com \
    --cc=dan.j.williams@intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dmaengine@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

dmaengine Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/dmaengine/0 dmaengine/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dmaengine dmaengine/ https://lore.kernel.org/dmaengine \
		dmaengine@vger.kernel.org
	public-inbox-index dmaengine

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.dmaengine


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git