dmaengine Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v4 0/2] Add Intel LGM soc DMA support
@ 2020-07-09  6:01 Amireddy Mallikarjuna reddy
  2020-07-09  6:01 ` [PATCH v4 1/2] dt-bindings: dma: Add bindings for intel LGM SOC Amireddy Mallikarjuna reddy
  2020-07-09  6:01 ` [PATCH v4 2/2] Add Intel LGM soc DMA support Amireddy Mallikarjuna reddy
  0 siblings, 2 replies; 10+ messages in thread
From: Amireddy Mallikarjuna reddy @ 2020-07-09  6:01 UTC (permalink / raw)
  To: dmaengine, vkoul, devicetree, robh+dt
  Cc: linux-kernel, andriy.shevchenko, chuanhua.lei, cheol.yong.kim,
	qi-ming.wu, malliamireddy009, Amireddy Mallikarjuna reddy

Add DMA controller driver for Lightning Mountain(LGM) family of SoCs.

The main function of the DMA controller is the transfer of data from/to any
DPlus compliant peripheral to/from the memory. A memory to memory copy
capability can also be configured.
This ldma driver is used for configure the device and channnels for data
and control paths.

These controllers provide DMA capabilities for a variety of on-chip
devices such as SSC, HSNAND and GSWIP.

-------------
Future Plans:
-------------
LGM SOC also supports Hardware Memory Copy engine.
The role of the HW Memory copy engine is to offload memory copy operations
from the CPU.

Amireddy Mallikarjuna reddy (2):
  dt-bindings: dma: Add bindings for intel LGM SOC
  Add Intel LGM soc DMA support.

 .../devicetree/bindings/dma/intel,ldma.yaml        |  416 +++++
 drivers/dma/Kconfig                                |    2 +
 drivers/dma/Makefile                               |    1 +
 drivers/dma/lgm/Kconfig                            |    9 +
 drivers/dma/lgm/Makefile                           |    2 +
 drivers/dma/lgm/lgm-dma.c                          | 1941 ++++++++++++++++++++
 include/linux/dma/lgm_dma.h                        |   27 +
 7 files changed, 2398 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/dma/intel,ldma.yaml
 create mode 100644 drivers/dma/lgm/Kconfig
 create mode 100644 drivers/dma/lgm/Makefile
 create mode 100644 drivers/dma/lgm/lgm-dma.c
 create mode 100644 include/linux/dma/lgm_dma.h

-- 
2.11.0


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v4 1/2] dt-bindings: dma: Add bindings for intel LGM SOC
  2020-07-09  6:01 [PATCH v4 0/2] Add Intel LGM soc DMA support Amireddy Mallikarjuna reddy
@ 2020-07-09  6:01 ` Amireddy Mallikarjuna reddy
  2020-07-09  7:54   ` Langer, Thomas
  2020-07-09  6:01 ` [PATCH v4 2/2] Add Intel LGM soc DMA support Amireddy Mallikarjuna reddy
  1 sibling, 1 reply; 10+ messages in thread
From: Amireddy Mallikarjuna reddy @ 2020-07-09  6:01 UTC (permalink / raw)
  To: dmaengine, vkoul, devicetree, robh+dt
  Cc: linux-kernel, andriy.shevchenko, chuanhua.lei, cheol.yong.kim,
	qi-ming.wu, malliamireddy009, Amireddy Mallikarjuna reddy

Add DT bindings YAML schema for DMA controller driver
of Lightning Mountain(LGM) SoC.

Signed-off-by: Amireddy Mallikarjuna reddy <mallikarjunax.reddy@linux.intel.com>
---
v1:
- Initial version.

v2:
- Fix bot errors.

v3:
- No change.

v4:
- Address Thomas langer comments
---
 .../devicetree/bindings/dma/intel,ldma.yaml        | 416 +++++++++++++++++++++
 1 file changed, 416 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/dma/intel,ldma.yaml

diff --git a/Documentation/devicetree/bindings/dma/intel,ldma.yaml b/Documentation/devicetree/bindings/dma/intel,ldma.yaml
new file mode 100644
index 000000000000..7f666b9812e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/intel,ldma.yaml
@@ -0,0 +1,416 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/intel,ldma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lightning Mountain centralized low speed DMA and high speed DMA controllers.
+
+maintainers:
+  - chuanhua.lei@intel.com
+  - mallikarjunax.reddy@intel.com
+
+properties:
+ $nodename:
+   pattern: "^dma(@.*)?$"
+
+ "#dma-cells":
+   const: 1
+
+ compatible:
+  anyOf:
+   - const: intel,lgm-cdma
+   - const: intel,lgm-dma2tx
+   - const: intel,lgm-dma1rx
+   - const: intel,lgm-dma1tx
+   - const: intel,lgm-dma0tx
+   - const: intel,lgm-dma3
+   - const: intel,lgm-toe-dma30
+   - const: intel,lgm-toe-dma31
+
+ reg:
+  maxItems: 1
+
+ clocks:
+  maxItems: 1
+
+ resets:
+  maxItems: 1
+
+ interrupts:
+  maxItems: 1
+
+ intel,dma-poll-cnt:
+   $ref: /schemas/types.yaml#definitions/uint32
+   description:
+     DMA descriptor polling counter. It may need fine tune according
+     to the system application scenario.
+
+ intel,dma-byte-en:
+   type: boolean
+   description:
+     DMA byte enable is only valid for DMA write(RX).
+     Byte enable(1) means DMA write will be based on the number of dwords
+     instead of the whole burst.
+
+ intel,dma-drb:
+    type: boolean
+    description:
+      DMA descriptor read back to make sure data and desc synchronization.
+
+ intel,dma-burst:
+    $ref: /schemas/types.yaml#definitions/uint32
+    description:
+       Specifiy the DMA burst size(in dwords), the valid value will be 8, 16, 32.
+       Default is 16 for data path dma, 32 is for memcopy DMA.
+
+ intel,dma-polling-cnt:
+    $ref: /schemas/types.yaml#definitions/uint32
+    description:
+       DMA descriptor polling counter. It may need fine tune according to
+       the system application scenario.
+
+ intel,dma-desc-in-sram:
+    type: boolean
+    description:
+       DMA descritpors in SRAM or not. Some old controllers descriptors
+       can be in DRAM or SRAM. The new ones are all in SRAM.
+
+ intel,dma-orrc:
+    $ref: /schemas/types.yaml#definitions/uint32
+    description:
+       DMA outstanding read counter. The maximum value is 16, and it may
+       need fine tune according to the system application scenarios.
+
+ intel,dma-dburst-wr:
+    type: boolean
+    description:
+       Enable RX dynamic burst write. It only applies to RX DMA and memcopy DMA.
+
+
+ dma-ports:
+    type: object
+    description:
+       This sub-node must contain a sub-node for each DMA port.
+    properties:
+      '#address-cells':
+        const: 1
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "^dma-ports@[0-9]+$":
+          type: object
+
+          properties:
+            reg:
+              items:
+                - enum: [0, 1, 2, 3, 4, 5]
+              description:
+                 Which port this node refers to.
+
+            intel,name:
+              $ref: /schemas/types.yaml#definitions/string-array
+              description:
+                 Port name of each DMA port.
+
+            intel,chans:
+              $ref: /schemas/types.yaml#/definitions/uint32-array
+              description:
+                 The channels included on this port. Format is channel start
+                 number and how many channels on this port.
+
+            intel,burst:
+              $ref: /schemas/types.yaml#/definitions/uint32
+              description:
+                 Specify the DMA port burst size, the valid value will be
+                 2, 4, 8. Default is 2 for data path dma.
+
+            intel,txwgt:
+              $ref: /schemas/types.yaml#/definitions/uint32
+              description:
+                 Specify the port transmit weight for QoS purpose. The valid
+                 value is 1~7. Default value is 1.
+
+            intel,endian:
+              $ref: /schemas/types.yaml#/definitions/uint32
+              description:
+                 Specify the DMA port endiannes conversion due to SoC endianness difference.
+
+          required:
+            - reg
+            - intel,name
+            - intel,chans
+
+
+ dma-channels:
+    type: object
+    description:
+       This sub-node must contain a sub-node for each DMA channel.
+    properties:
+      '#address-cells':
+        const: 1
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "^dma-channels@[0-9]+$":
+          type: object
+
+          properties:
+            reg:
+              items:
+                - enum: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
+              description:
+                 Which channel this node refers to.
+
+            intel,desc_num:
+              $ref: /schemas/types.yaml#/definitions/uint32
+              description:
+                 Per channel maximum descriptor number. The max value is 255.
+
+            intel,pkt_sz:
+              $ref: /schemas/types.yaml#/definitions/uint32
+              description:
+                 Channel buffer packet size. It must be power of 2.
+                 The maximum size is 4096.
+
+            intel,desc-rx-nonpost:
+              type: boolean
+              description:
+                 Write non-posted type for DMA RX last data beat of every descriptor.
+
+            intel,data-endian:
+              $ref: /schemas/types.yaml#/definitions/uint32
+              description:
+                 Per channel data endianness configuration according to SoC requirement.
+
+            intel,desc-endian:
+              $ref: /schemas/types.yaml#/definitions/uint32
+              description:
+                 Per channel descriptor endianness configuration according to SoC requirement.
+
+            intel,data-endian-en:
+              type: boolean
+              description:
+                 Per channel data endianness enabled.
+
+            intel,desc-endian-en:
+              type: boolean
+              description:
+                 Per channel descriptor endianness enabled.
+
+            intel,byte-offset:
+              $ref: /schemas/types.yaml#/definitions/uint32
+              description:
+                 Per channel byte offset(0~128).
+
+            intel,hdr-mode:
+              $ref: /schemas/types.yaml#/definitions/uint32-array
+              description:
+                 The first parameter is header mode size, the second
+                 parameter is checksum enable or disable. If enabled,
+                 header mode size is ignored. If disabled, header mode
+                 size must be provided.
+
+            intel,non-arb-cnt:
+              $ref: /schemas/types.yaml#/definitions/uint32
+              description:
+                 Per channel non arbitration counter while polling
+
+            intel,arb-cnt:
+              $ref: /schemas/types.yaml#/definitions/uint32
+              description:
+                 Per channel arbitration counter while polling.
+                 arb_cnt must be greater than non_arb_cnt
+
+            intel,pkt-drop:
+              type: boolean
+              description:
+                 Channel packet drop enabled or disabled.
+
+            intel,hw-desc:
+              $ref: /schemas/types.yaml#/definitions/uint32-array
+              description:
+                 Per channel dma hardware descriptor configuration.
+                 The first parameter is descriptor physical address and the
+                 second parameter hardware descriptor number.
+
+          required:
+            - reg
+
+required:
+ - compatible
+ - reg
+ - '#dma-cells'
+
+examples:
+ - |
+   dma0: dma@e0e00000 {
+     compatible = "intel,lgm-cdma";
+     reg = <0xe0e00000 0x1000>;
+     #dma-cells = <1>;
+     interrupt-parent = <&ioapic1>;
+     interrupts = <82 1>;
+     resets = <&rcu0 0x30 0>;
+     reset-names = "ctrl";
+     clocks = <&cgu0 80>;
+     intel,dma-poll-cnt = <4>;
+     intel,dma-byte-en;
+     intel,dma-drb;
+     dma-ports {
+       #address-cells = <1>;
+       #size-cells = <0>;
+
+       dma-ports@0 {
+           reg = <0>;
+           intel,name = "SPI0";
+           intel,chans = <0 2>;
+           intel,burst = <2>;
+           intel,txwgt = <1>;
+       };
+       dma-ports@1 {
+           reg = <1>;
+           intel,name = "SPI1";
+           intel,chans = <2 2>;
+           intel,burst = <2>;
+           intel,txwgt = <1>;
+       };
+       dma-ports@2 {
+           reg = <2>;
+           intel,name = "SPI2";
+           intel,chans = <4 2>;
+           intel,burst = <2>;
+           intel,txwgt = <1>;
+       };
+       dma-ports@3 {
+           reg = <3>;
+           intel,name = "SPI3";
+           intel,chans = <6 2>;
+           intel,burst = <2>;
+           intel,endian = <0>;
+           intel,txwgt = <1>;
+       };
+       dma-ports@4 {
+           reg = <4>;
+           intel,name = "HSNAND";
+           intel,chans = <8 2>;
+           intel,burst = <8>;
+           intel,txwgt = <1>;
+       };
+       dma-ports@5 {
+           reg = <5>;
+           intel,name = "PCM";
+           intel,chans = <10 6>;
+           intel,burst = <8>;
+           intel,txwgt = <1>;
+       };
+     };
+     dma-channels {
+       #address-cells = <1>;
+       #size-cells = <0>;
+
+       dma-channels@0 {
+           reg = <0>;
+           intel,desc_num = <1>;
+       };
+       dma-channels@1 {
+           reg = <1>;
+           intel,desc_num = <1>;
+       };
+       dma-channels@2 {
+           reg = <2>;
+           intel,desc_num = <1>;
+       };
+       dma-channels@3 {
+           reg = <3>;
+           intel,desc_num = <1>;
+       };
+       dma-channels@4 {
+           reg = <4>;
+           intel,desc_num = <1>;
+       };
+       dma-channels@5 {
+           reg = <5>;
+           intel,desc_num = <1>;
+       };
+       dma-channels@6 {
+           reg = <6>;
+           intel,desc_num = <1>;
+       };
+       dma-channels@7 {
+           reg = <7>;
+           intel,desc_num = <1>;
+       };
+       dma-channels@8 {
+           reg = <8>;
+       };
+       dma-channels@9 {
+           reg = <9>;
+       };
+       dma-channels@10 {
+           reg = <10>;
+       };
+       dma-channels@11 {
+           reg = <11>;
+       };
+       dma-channels@12 {
+           reg = <12>;
+       };
+       dma-channels@13 {
+           reg = <13>;
+       };
+       dma-channels@14 {
+           reg = <14>;
+       };
+       dma-channels@15 {
+           reg = <15>;
+       };
+     };
+   };
+ - |
+   dma3: dma@ec800000 {
+     compatible = "intel,lgm-dma3";
+     reg = <0xec800000 0x1000>;
+     clocks = <&cgu0 71>;
+     resets = <&rcu0 0x10 9>;
+     #dma-cells = <1>;
+     intel,dma-burst = <32>;
+     intel,dma-polling-cnt = <16>;
+     intel,dma-desc-in-sram;
+     intel,dma-orrc = <16>;
+     intel,dma-byte-en;
+     intel,dma-dburst-wr;
+     dma-channels {
+         #address-cells = <1>;
+         #size-cells = <0>;
+
+         dma-channels@12 {
+             reg = <12>;
+             intel,pkt_sz = <4096>;
+             intel,desc-rx-nonpost;
+             intel,data-endian = <0>;
+             intel,desc-endian = <0>;
+             intel,data-endian-en;
+             intel,desc-endian-en;
+             intel,byte-offset = <0>;
+             intel,hdr-mode = <128 0>;
+             intel,non-arb-cnt = <0>;
+             intel,arb-cnt = <0>;
+             intel,hw-desc = <0x20000000 8>;
+         };
+         dma-channels@13 {
+             reg = <13>;
+             intel,pkt-drop;
+             intel,pkt_sz = <4096>;
+             intel,data-endian = <0>;
+             intel,desc-endian = <0>;
+             intel,data-endian-en;
+             intel,desc-endian-en;
+             intel,byte-offset = <0>;
+             intel,hdr-mode = <128 0>;
+             intel,non-arb-cnt = <0>;
+             intel,arb-cnt = <0>;
+         };
+     };
+   };
-- 
2.11.0


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v4 2/2] Add Intel LGM soc DMA support.
  2020-07-09  6:01 [PATCH v4 0/2] Add Intel LGM soc DMA support Amireddy Mallikarjuna reddy
  2020-07-09  6:01 ` [PATCH v4 1/2] dt-bindings: dma: Add bindings for intel LGM SOC Amireddy Mallikarjuna reddy
@ 2020-07-09  6:01 ` Amireddy Mallikarjuna reddy
  2020-07-09 11:09   ` Andy Shevchenko
  1 sibling, 1 reply; 10+ messages in thread
From: Amireddy Mallikarjuna reddy @ 2020-07-09  6:01 UTC (permalink / raw)
  To: dmaengine, vkoul, devicetree, robh+dt
  Cc: linux-kernel, andriy.shevchenko, chuanhua.lei, cheol.yong.kim,
	qi-ming.wu, malliamireddy009, Amireddy Mallikarjuna reddy

Add DMA controller driver for Lightning Mountain(LGM) family of SoCs.

The main function of the DMA controller is the transfer of data from/to any
DPlus compliant peripheral to/from the memory. A memory to memory copy
capability can also be configured.

This ldma driver is used for configure the device and channnels for data
and control paths.

Signed-off-by: Amireddy Mallikarjuna reddy <mallikarjunax.reddy@linux.intel.com>
---
v1:
- Initial version.

v2:
- Fix device tree bot issues, correspondign driver changes done.
- Fix kerntel test robot warnings.
  --------------------------------------------------------
  >> drivers/dma/lgm/lgm-dma.c:729:5: warning: no previous prototype for function 'intel_dma_chan_desc_cfg' [-Wmissing-prototypes]
  int intel_dma_chan_desc_cfg(struct dma_chan *chan, dma_addr_t desc_base,
  ^
  drivers/dma/lgm/lgm-dma.c:729:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
  int intel_dma_chan_desc_cfg(struct dma_chan *chan, dma_addr_t desc_base,
  ^
  static
  1 warning generated.

  vim +/intel_dma_chan_desc_cfg +729 drivers/dma/lgm/lgm-dma.c

    728
  > 729 int intel_dma_chan_desc_cfg(struct dma_chan *chan, dma_addr_t desc_base,
    730                             int desc_num)
    731 {
    732         return ldma_chan_desc_cfg(to_ldma_chan(chan), desc_base, desc_num);
    733 }
    734 EXPORT_SYMBOL_GPL(intel_dma_chan_desc_cfg);
    735

   Reported-by: kernel test robot <lkp@intel.com>
   ---------------------------------------------------------------

v3:
- Fix smatch warning.
  ----------------------------------------------------------------
  smatch warnings:
  drivers/dma/lgm/lgm-dma.c:1306 ldma_cfg_init() error: uninitialized symbol 'ret'.

  Reported-by: kernel test robot <lkp@intel.com>
  Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
  ----------------------------------------------------------------

v4:
- Address Thomas Langer comments in dtbinding and corresponding driver side changes.
---
 drivers/dma/Kconfig         |    2 +
 drivers/dma/Makefile        |    1 +
 drivers/dma/lgm/Kconfig     |    9 +
 drivers/dma/lgm/Makefile    |    2 +
 drivers/dma/lgm/lgm-dma.c   | 1941 +++++++++++++++++++++++++++++++++++++++++++
 include/linux/dma/lgm_dma.h |   27 +
 6 files changed, 1982 insertions(+)
 create mode 100644 drivers/dma/lgm/Kconfig
 create mode 100644 drivers/dma/lgm/Makefile
 create mode 100644 drivers/dma/lgm/lgm-dma.c
 create mode 100644 include/linux/dma/lgm_dma.h

diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index de41d7928bff..caeaf12fd524 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -737,6 +737,8 @@ source "drivers/dma/ti/Kconfig"
 
 source "drivers/dma/fsl-dpaa2-qdma/Kconfig"
 
+source "drivers/dma/lgm/Kconfig"
+
 # clients
 comment "DMA Clients"
 	depends on DMA_ENGINE
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index e60f81331d4c..0b899b076f4e 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -83,6 +83,7 @@ obj-$(CONFIG_XGENE_DMA) += xgene-dma.o
 obj-$(CONFIG_ZX_DMA) += zx_dma.o
 obj-$(CONFIG_ST_FDMA) += st_fdma.o
 obj-$(CONFIG_FSL_DPAA2_QDMA) += fsl-dpaa2-qdma/
+obj-$(CONFIG_INTEL_LDMA) += lgm/
 
 obj-y += mediatek/
 obj-y += qcom/
diff --git a/drivers/dma/lgm/Kconfig b/drivers/dma/lgm/Kconfig
new file mode 100644
index 000000000000..bdb5b0d91afb
--- /dev/null
+++ b/drivers/dma/lgm/Kconfig
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config INTEL_LDMA
+	bool "Lightning Mountain centralized low speed DMA and high speed DMA controllers"
+	select DMA_ENGINE
+	select DMA_VIRTUAL_CHANNELS
+	help
+	  Enable support for intel Lightning Mountain SOC DMA controllers.
+	  These controllers provide DMA capabilities for a variety of on-chip
+	  devices such as SSC, HSNAND and GSWIP.
diff --git a/drivers/dma/lgm/Makefile b/drivers/dma/lgm/Makefile
new file mode 100644
index 000000000000..f318a8eff464
--- /dev/null
+++ b/drivers/dma/lgm/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_INTEL_LDMA)	+= lgm-dma.o
diff --git a/drivers/dma/lgm/lgm-dma.c b/drivers/dma/lgm/lgm-dma.c
new file mode 100644
index 000000000000..91c0a28fe8fb
--- /dev/null
+++ b/drivers/dma/lgm/lgm-dma.c
@@ -0,0 +1,1941 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Lightning Mountain centralized low speed and high speed DMA controller driver
+ *
+ * Copyright (c) 2016 ~ 2020 Intel Corporation.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/dma/lgm_dma.h>
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/iopoll.h>
+#include <linux/of_dma.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+
+#include "../dmaengine.h"
+#include "../virt-dma.h"
+
+#define DRIVER_NAME			"lgm-ldma"
+
+#define DMA_ID				0x0008
+#define DMA_ID_REV			GENMASK(7, 0)
+#define DMA_ID_PNR			GENMASK(19, 16)
+#define DMA_ID_CHNR			GENMASK(26, 20)
+#define DMA_ID_DW_128B			BIT(27)
+#define DMA_ID_AW_36B			BIT(28)
+#define DMA_VER32			0x32
+#define DMA_VER31			0x31
+#define DMA_VER22			0x0A
+
+#define DMA_CTRL			0x0010
+#define DMA_CTRL_RST			BIT(0)
+#define DMA_CTRL_DSRAM_PATH		BIT(1)
+#define DMA_CTRL_DBURST_WR		BIT(3)
+#define DMA_CTRL_VLD_DF_ACK		BIT(4)
+#define DMA_CTRL_CH_FL			BIT(6)
+#define DMA_CTRL_DS_FOD			BIT(7)
+#define DMA_CTRL_DRB			BIT(8)
+#define DMA_CTRL_ENBE			BIT(9)
+#define DMA_CTRL_DESC_TMOUT_CNT_V31	GENMASK(27, 16)
+#define DMA_CTRL_DESC_TMOUT_EN_V31	BIT(30)
+#define DMA_CTRL_PKTARB			BIT(31)
+
+#define DMA_CPOLL			0x0014
+#define DMA_CPOLL_CNT			GENMASK(15, 4)
+#define DMA_CPOLL_EN			BIT(31)
+
+#define DMA_CS				0x0018
+#define DMA_CS_MASK			GENMASK(5, 0)
+
+#define DMA_CCTRL			0x001C
+#define DMA_CCTRL_ON			BIT(0)
+#define DMA_CCTRL_RST			BIT(1)
+#define DMA_CCTRL_CH_POLL_EN		BIT(2)
+#define DMA_CCTRL_CH_ABC		BIT(3) /* Adaptive Burst Chop */
+#define DMA_CDBA_MSB			GENMASK(7, 4)
+#define DMA_CCTRL_DIR_TX		BIT(8)
+#define DMA_CCTRL_CLASS			GENMASK(11, 9)
+#define DMA_CCTRL_CLASSH		GENMASK(19, 18)
+#define DMA_CCTRL_WR_NP_EN		BIT(21)
+#define DMA_CCTRL_PDEN			BIT(23)
+#define DMA_MAX_CLASS			(SZ_32 - 1)
+
+#define DMA_CDBA			0x0020
+#define DMA_CDLEN			0x0024
+#define DMA_CIS				0x0028
+#define DMA_CIE				0x002C
+#define DMA_CI_EOP			BIT(1)
+#define DMA_CI_DUR			BIT(2)
+#define DMA_CI_DESCPT			BIT(3)
+#define DMA_CI_CHOFF			BIT(4)
+#define DMA_CI_RDERR			BIT(5)
+#define DMA_CI_ALL							\
+	(DMA_CI_EOP | DMA_CI_DUR | DMA_CI_DESCPT | DMA_CI_CHOFF | DMA_CI_RDERR)
+
+#define DMA_PS				0x0040
+#define DMA_PCTRL			0x0044
+#define DMA_PCTRL_RXBL16		BIT(0)
+#define DMA_PCTRL_TXBL16		BIT(1)
+#define DMA_PCTRL_RXBL			GENMASK(3, 2)
+#define DMA_PCTRL_RXBL_8		3
+#define DMA_PCTRL_TXBL			GENMASK(5, 4)
+#define DMA_PCTRL_TXBL_8		3
+#define DMA_PCTRL_PDEN			BIT(6)
+#define DMA_PCTRL_RXBL32		BIT(7)
+#define DMA_PCTRL_RXENDI		GENMASK(9, 8)
+#define DMA_PCTRL_TXENDI		GENMASK(11, 10)
+#define DMA_PCTRL_TXBL32		BIT(15)
+#define DMA_PCTRL_MEM_FLUSH		BIT(16)
+
+#define DMA_IRNEN1			0x00E8
+#define DMA_IRNCR1			0x00EC
+#define DMA_IRNEN			0x00F4
+#define DMA_IRNCR			0x00F8
+#define DMA_C_DP_TICK			0x100
+#define DMA_C_DP_TICK_TIKNARB		GENMASK(15, 0)
+#define DMA_C_DP_TICK_TIKARB		GENMASK(31, 16)
+
+#define DMA_C_HDRM			0x110
+/*
+ * If header mode is set in DMA descriptor,
+ *   If bit 30 is disabled, HDR_LEN must be configured according to channel
+ *     requirement.
+ *   If bit 30 is enabled(checksum with heade mode), HDR_LEN has no need to
+ *     be configured. It will enable check sum for switch
+ * If header mode is not set in DMA descriptor,
+ *   This register setting doesn't matter
+ */
+#define DMA_C_HDRM_HDR_SUM		BIT(30)
+
+#define DMA_C_BOFF			0x120
+#define DMA_C_BOFF_BOF_LEN		GENMASK(7, 0)
+#define DMA_C_BOFF_EN			BIT(31)
+
+#define DMA_ORRC			0x190
+#define DMA_ORRC_ORRCNT			GENMASK(8, 4)
+#define DMA_ORRC_EN			BIT(31)
+
+#define DMA_C_ENDIAN			0x200
+#define DMA_C_END_DATAENDI		GENMASK(1, 0)
+#define DMA_C_END_DE_EN			BIT(7)
+#define DMA_C_END_DESENDI		GENMASK(9, 8)
+#define DMA_C_END_DES_EN		BIT(16)
+
+/* DMA controller capability */
+#define DMA_ADDR_36BIT			BIT(0)
+#define DMA_DATA_128BIT			BIT(1)
+#define DMA_CHAN_FLOW_CTL		BIT(2)
+#define DMA_DESC_FTOD			BIT(3)
+#define DMA_DESC_IN_SRAM		BIT(4)
+#define DMA_EN_BYTE_EN			BIT(5)
+#define DMA_DBURST_WR			BIT(6)
+#define DMA_VLD_FETCH_ACK		BIT(7)
+#define DMA_DFT_DRB			BIT(8)
+
+#define DMA_ORRC_MAX_CNT		(SZ_32 - 1)
+#define DMA_DFT_POLL_CNT		SZ_4
+
+#define DMA_DFT_BURST_V22		2
+#define DMA_BURSTL_8DW			8
+#define DMA_BURSTL_16DW			16
+#define DMA_BURSTL_32DW			32
+#define DMA_DFT_BURST			DMA_BURSTL_16DW
+
+#define DMA_MAX_DESC_NUM		(SZ_8K - 1)
+#define DMA_MAX_PKT_SZ			(SZ_16K - 1)
+#define DMA_PKT_SZ_DFT			SZ_2K
+#define DMA_CHAN_BOFF_MAX		(SZ_256 - 1)
+
+#define DMA_DFT_ENDIAN			DMA_ENDIAN_TYPE0
+#define DMA_ENDIAN_MAX			DMA_ENDIAN_TYPE3
+
+#define DMA_DFT_DESC_TCNT		50
+#define DMA_HDR_LEN_MAX			(SZ_16K - 1)
+
+/* DMA flags */
+#define DMA_TX_CH			BIT(0)
+#define DMA_RX_CH			BIT(1)
+#define DEVICE_ALLOC_DESC		BIT(2)
+#define CHAN_IN_USE			BIT(3)
+#define DMA_HW_DESC			BIT(4)
+
+#define DMA_CHAN_RST			1
+#define DMA_TX_PORT_DFT_WGT		1
+#define DMA_DFT_DESC_NUM		1
+#define DMA_MAX_SIZE			(BIT(16) - 1)
+#define MAX_LOWER_CHANS			32
+#define MASK_LOWER_CHANS		GENMASK(4, 0)
+#define DMA_OWN				1
+
+enum ldma_chan_on_off {
+	DMA_CH_OFF = 0,
+	DMA_CH_ON = 1,
+};
+
+enum ldma_pkt_drop {
+	DMA_PKT_DROP_DIS = 0,
+	DMA_PKT_DROP_EN,
+};
+
+enum ldma_endian {
+	DMA_ENDIAN_TYPE0 = 0,
+	DMA_ENDIAN_TYPE1,
+	DMA_ENDIAN_TYPE2,
+	DMA_ENDIAN_TYPE3,
+};
+
+enum {
+	DMA_TYPE_TX = 0,
+	DMA_TYPE_RX,
+	DMA_TYPE_MCPY,
+};
+
+struct ldma_dev;
+struct ldma_port;
+struct ldma_chan {
+	struct ldma_port	*port; /* back pointer */
+	char			name[8]; /* Channel name */
+	struct virt_dma_chan	vchan;
+	int			nr; /* Channel id in hardware */
+	u32			flags; /* central way or channel based way */
+	enum ldma_chan_on_off	onoff;
+	dma_addr_t		desc_phys;
+	void			*desc_base; /* Virtual address */
+	u32			desc_cnt; /* Number of descriptors */
+	int			rst;
+	u32			pkt_sz;
+	u32			nonarb_cnt;
+	u32			arb_cnt;
+	u32			hdrm_len;
+	bool			hdrm_csum;
+	u32			boff_len;
+	u32			data_endian;
+	u32			desc_endian;
+	bool			pden;
+	bool			desc_rx_np;
+	bool			data_endian_en;
+	bool			desc_endian_en;
+	bool			abc_en;
+	bool			desc_init;
+	struct dma_pool		*desc_pool; /* Descriptors pool */
+	u32			desc_num;
+	struct dw2_desc_sw	*ds;
+	struct work_struct	work;
+};
+
+struct ldma_port {
+	struct ldma_dev		*ldev; /* back pointer */
+	const char		*name;
+	u32			portid;
+	u32			rxbl;
+	u32			txbl;
+	u32			chan_start;
+	u32			chan_sz;
+	u32			txwgt;
+	enum ldma_endian	rxendi;
+	enum ldma_endian	txendi;
+	enum ldma_pkt_drop	pkt_drop;
+	int			flush_memcpy;
+	bool			pden;
+};
+
+/* Instance specific data */
+struct ldma_inst_data {
+	struct dma_dev_ops	*ops;
+	const char	*name;
+	u32 type;
+};
+
+struct ldma_dev {
+	struct device		*dev;
+	void __iomem		*base;
+	struct reset_control	*rst;
+	struct clk		*core_clk;
+	struct dma_device	dma_dev;
+	u32			ver;
+	int			irq;
+	struct ldma_port	*ports;
+	struct ldma_chan	*chans; /* channel list on this DMA or port */
+	spinlock_t		dev_lock; /* Controller register execlusive */
+	u32			chan_nrs;
+	u32			port_nrs;
+	u32			flags;
+	u32			pollcnt;
+	u32			orrc; /* Outstanding read count */
+	const struct ldma_inst_data *inst;
+	struct workqueue_struct *wq;
+};
+
+struct dw2_desc {
+	union {
+		struct {
+			u32 len		:16;
+			u32 res0	:7;
+			u32 bofs	:2;
+			u32 res1	:3;
+			u32 eop		:1;
+			u32 sop		:1;
+			u32 c		:1;
+			u32 own		:1;
+		} __packed field;
+		u32 word;
+	} __packed status;
+	u32 addr;
+} __packed __aligned(8);
+
+struct dw2_desc_sw {
+	struct ldma_chan		*chan;
+	struct dma_async_tx_descriptor	async_tx;
+	dma_addr_t			desc_phys;
+	size_t				desc_cnt;
+	size_t				size;
+	struct dw2_desc			*desc_hw;
+};
+
+struct dma_dev_ops {
+	int (*device_alloc_chan_resources)(struct dma_chan *chan);
+	void (*device_free_chan_resources)(struct dma_chan *chan);
+	int (*device_config)(struct dma_chan *chan,
+			     struct dma_slave_config *config);
+	int (*device_pause)(struct dma_chan *chan);
+	int (*device_resume)(struct dma_chan *chan);
+	int (*device_terminate_all)(struct dma_chan *chan);
+	void (*device_synchronize)(struct dma_chan *chan);
+	enum dma_status (*device_tx_status)(struct dma_chan *chan,
+					    dma_cookie_t cookie,
+					    struct dma_tx_state *txstate);
+	struct dma_async_tx_descriptor *(*device_prep_slave_sg)
+		(struct dma_chan *chan, struct scatterlist *sgl,
+		unsigned int sg_len, enum dma_transfer_direction direction,
+		unsigned long flags, void *context);
+	void (*device_issue_pending)(struct dma_chan *chan);
+};
+
+static inline void
+ldma_update_bits(struct ldma_dev *d, u32 mask, u32 val, u32 ofs)
+{
+	u32 old_val, new_val;
+
+	old_val = readl(d->base +  ofs);
+	new_val = (old_val & ~mask) | (val & mask);
+
+	if (new_val != old_val)
+		writel(new_val, d->base + ofs);
+}
+
+static inline struct ldma_chan *to_ldma_chan(struct dma_chan *chan)
+{
+	return container_of(chan, struct ldma_chan, vchan.chan);
+}
+
+static inline struct ldma_dev *to_ldma_dev(struct dma_device *dma_dev)
+{
+	return container_of(dma_dev, struct ldma_dev, dma_dev);
+}
+
+static inline bool ldma_chan_tx(struct ldma_chan *c)
+{
+	return !!(c->flags & DMA_TX_CH);
+}
+
+static inline bool ldma_chan_is_hw_desc(struct ldma_chan *c)
+{
+	return !!(c->flags & DMA_HW_DESC);
+}
+
+static void ldma_dev_reset(struct ldma_dev *d)
+
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&d->dev_lock, flags);
+	ldma_update_bits(d, DMA_CTRL_RST, DMA_CTRL_RST, DMA_CTRL);
+	spin_unlock_irqrestore(&d->dev_lock, flags);
+}
+
+static void ldma_dev_pkt_arb_cfg(struct ldma_dev *d, bool enable)
+{
+	unsigned long flags;
+	u32 mask = DMA_CTRL_PKTARB;
+	u32 val = enable ? DMA_CTRL_PKTARB : 0;
+
+	spin_lock_irqsave(&d->dev_lock, flags);
+	ldma_update_bits(d, mask, val, DMA_CTRL);
+	spin_unlock_irqrestore(&d->dev_lock, flags);
+}
+
+static void ldma_dev_sram_desc_cfg(struct ldma_dev *d, bool enable)
+{
+	unsigned long flags;
+	u32 mask = DMA_CTRL_DSRAM_PATH;
+	u32 val = enable ? DMA_CTRL_DSRAM_PATH : 0;
+
+	spin_lock_irqsave(&d->dev_lock, flags);
+	ldma_update_bits(d, mask, val, DMA_CTRL);
+	spin_unlock_irqrestore(&d->dev_lock, flags);
+}
+
+static void ldma_dev_chan_flow_ctl_cfg(struct ldma_dev *d, bool enable)
+{
+	unsigned long flags;
+	u32 mask, val;
+
+	if (d->inst->type != DMA_TYPE_TX)
+		return;
+
+	mask = DMA_CTRL_CH_FL;
+	val = enable ? DMA_CTRL_CH_FL : 0;
+
+	spin_lock_irqsave(&d->dev_lock, flags);
+	ldma_update_bits(d, mask, val, DMA_CTRL);
+	spin_unlock_irqrestore(&d->dev_lock, flags);
+}
+
+static void ldma_dev_global_polling_enable(struct ldma_dev *d)
+{
+	unsigned long flags;
+	u32 mask = DMA_CPOLL_EN | DMA_CPOLL_CNT;
+	u32 val = DMA_CPOLL_EN;
+
+	val |= FIELD_PREP(DMA_CPOLL_CNT, d->pollcnt);
+
+	spin_lock_irqsave(&d->dev_lock, flags);
+	ldma_update_bits(d, mask, val, DMA_CPOLL);
+	spin_unlock_irqrestore(&d->dev_lock, flags);
+}
+
+static void ldma_dev_desc_fetch_on_demand_cfg(struct ldma_dev *d, bool enable)
+{
+	unsigned long flags;
+	u32 mask, val;
+
+	if (d->inst->type == DMA_TYPE_MCPY)
+		return;
+
+	mask = DMA_CTRL_DS_FOD;
+	val = enable ? DMA_CTRL_DS_FOD : 0;
+
+	spin_lock_irqsave(&d->dev_lock, flags);
+	ldma_update_bits(d, mask, val, DMA_CTRL);
+	spin_unlock_irqrestore(&d->dev_lock, flags);
+}
+
+static void ldma_dev_byte_enable_cfg(struct ldma_dev *d, bool enable)
+{
+	unsigned long flags;
+	u32 mask = DMA_CTRL_ENBE;
+	u32 val = enable ? DMA_CTRL_ENBE : 0;
+
+	spin_lock_irqsave(&d->dev_lock, flags);
+	ldma_update_bits(d, mask, val, DMA_CTRL);
+	spin_unlock_irqrestore(&d->dev_lock, flags);
+}
+
+/*
+ * orr_cnt >= 16, it will be 16
+ * 4 <= orr_cnt < 16, it ill be orr_cnt
+ * orr_cnt < 4, it will be 3. Minimum 3 orr supported
+ */
+static void ldma_dev_orrc_cfg(struct ldma_dev *d)
+{
+	unsigned long flags;
+	u32 val = 0;
+	u32 mask;
+
+	if (d->inst->type == DMA_TYPE_RX)
+		return;
+
+	mask = DMA_ORRC_EN | DMA_ORRC_ORRCNT;
+	if (d->orrc > 0 && d->orrc <= DMA_ORRC_MAX_CNT)
+		val = DMA_ORRC_EN | FIELD_PREP(DMA_ORRC_ORRCNT, d->orrc);
+
+	spin_lock_irqsave(&d->dev_lock, flags);
+	ldma_update_bits(d, mask, val, DMA_ORRC);
+	spin_unlock_irqrestore(&d->dev_lock, flags);
+}
+
+static void ldma_dev_df_tout_cfg(struct ldma_dev *d, bool enable, int tcnt)
+{
+	u32 mask = DMA_CTRL_DESC_TMOUT_CNT_V31;
+	unsigned long flags;
+	u32 val;
+
+	if (enable)
+		val = DMA_CTRL_DESC_TMOUT_EN_V31 | FIELD_PREP(DMA_CTRL_DESC_TMOUT_CNT_V31, tcnt);
+	else
+		val = 0;
+
+	spin_lock_irqsave(&d->dev_lock, flags);
+	ldma_update_bits(d, mask, val, DMA_CTRL);
+	spin_unlock_irqrestore(&d->dev_lock, flags);
+}
+
+static void ldma_dev_dburst_wr_cfg(struct ldma_dev *d, bool enable)
+{
+	unsigned long flags;
+	u32 mask, val;
+
+	if (d->inst->type != DMA_TYPE_RX && d->inst->type != DMA_TYPE_MCPY)
+		return;
+
+	mask = DMA_CTRL_DBURST_WR;
+	val = enable ? DMA_CTRL_DBURST_WR : 0;
+
+	spin_lock_irqsave(&d->dev_lock, flags);
+	ldma_update_bits(d, mask, val, DMA_CTRL);
+	spin_unlock_irqrestore(&d->dev_lock, flags);
+}
+
+static void ldma_dev_vld_fetch_ack_cfg(struct ldma_dev *d, bool enable)
+{
+	unsigned long flags;
+	u32 mask, val;
+
+	if (d->inst->type != DMA_TYPE_TX)
+		return;
+
+	mask = DMA_CTRL_VLD_DF_ACK;
+	val = enable ? DMA_CTRL_VLD_DF_ACK : 0;
+
+	spin_lock_irqsave(&d->dev_lock, flags);
+	ldma_update_bits(d, mask, val, DMA_CTRL);
+	spin_unlock_irqrestore(&d->dev_lock, flags);
+}
+
+static void ldma_dev_drb_cfg(struct ldma_dev *d, int enable)
+{
+	unsigned long flags;
+	u32 mask = DMA_CTRL_DRB;
+	u32 val = enable ? DMA_CTRL_DRB : 0;
+
+	spin_lock_irqsave(&d->dev_lock, flags);
+	ldma_update_bits(d, mask, val, DMA_CTRL);
+	spin_unlock_irqrestore(&d->dev_lock, flags);
+}
+
+static int ldma_dev_cfg(struct ldma_dev *d)
+{
+	bool enable;
+
+	ldma_dev_pkt_arb_cfg(d, true);
+	ldma_dev_global_polling_enable(d);
+
+	enable = !!(d->flags & DMA_DFT_DRB);
+	ldma_dev_drb_cfg(d, enable);
+
+	enable = !!(d->flags & DMA_EN_BYTE_EN);
+	ldma_dev_byte_enable_cfg(d, enable);
+
+	enable = !!(d->flags & DMA_CHAN_FLOW_CTL);
+	ldma_dev_chan_flow_ctl_cfg(d, enable);
+
+	enable = !!(d->flags & DMA_DESC_FTOD);
+	ldma_dev_desc_fetch_on_demand_cfg(d, enable);
+
+	enable = !!(d->flags & DMA_DESC_IN_SRAM);
+	ldma_dev_sram_desc_cfg(d, enable);
+
+	enable = !!(d->flags & DMA_DBURST_WR);
+	ldma_dev_dburst_wr_cfg(d, enable);
+
+	enable = !!(d->flags & DMA_VLD_FETCH_ACK);
+	ldma_dev_vld_fetch_ack_cfg(d, enable);
+
+	if (d->ver > DMA_VER22) {
+		ldma_dev_orrc_cfg(d);
+		ldma_dev_df_tout_cfg(d, true, DMA_DFT_DESC_TCNT);
+	}
+
+	dev_dbg(d->dev, "%s Controller 0x%08x configuration done\n",
+		d->inst->name, readl(d->base + DMA_CTRL));
+
+	return 0;
+}
+
+static int ldma_chan_cctrl_cfg(struct ldma_chan *c, u32 val)
+{
+	struct ldma_dev *d = to_ldma_dev(c->vchan.chan.device);
+	unsigned long flags;
+	u32 reg;
+
+	spin_lock_irqsave(&d->dev_lock, flags);
+	ldma_update_bits(d, DMA_CS_MASK, c->nr, DMA_CS);
+	reg = readl(d->base + DMA_CCTRL);
+	/* Read from hardware */
+	if (reg & DMA_CCTRL_DIR_TX)
+		c->flags |= DMA_TX_CH;
+	else
+		c->flags |= DMA_RX_CH;
+
+	/* Keep the class value unchanged */
+	reg &= DMA_CCTRL_CLASS | DMA_CCTRL_CLASSH;
+	reg |= val;
+	writel(reg, d->base + DMA_CCTRL);
+	spin_unlock_irqrestore(&d->dev_lock, flags);
+
+	return 0;
+}
+
+static void ldma_chan_irq_init(struct ldma_chan *c)
+{
+	struct ldma_dev *d = to_ldma_dev(c->vchan.chan.device);
+	unsigned long flags;
+	u32 enofs, crofs;
+	u32 cn_bit;
+
+	if (c->nr < MAX_LOWER_CHANS) {
+		enofs = DMA_IRNEN;
+		crofs = DMA_IRNCR;
+	} else {
+		enofs = DMA_IRNEN1;
+		crofs = DMA_IRNCR1;
+	}
+
+	cn_bit = BIT(c->nr & MASK_LOWER_CHANS);
+	spin_lock_irqsave(&d->dev_lock, flags);
+	ldma_update_bits(d, DMA_CS_MASK, c->nr, DMA_CS);
+
+	/* Clear all interrupts and disabled it */
+	writel(0, d->base + DMA_CIE);
+	writel(DMA_CI_ALL, d->base + DMA_CIS);
+
+	ldma_update_bits(d, cn_bit, 0, enofs);
+	writel(cn_bit, d->base + crofs);
+	spin_unlock_irqrestore(&d->dev_lock, flags);
+}
+
+static void ldma_chan_set_class(struct ldma_chan *c, u32 val)
+{
+	struct ldma_dev *d = to_ldma_dev(c->vchan.chan.device);
+	unsigned long flags;
+	u32 class_val;
+
+	if (d->inst->type == DMA_TYPE_MCPY || val > DMA_MAX_CLASS)
+		return;
+
+	/* 3 bits low */
+	class_val = FIELD_PREP(DMA_CCTRL_CLASS, val & 0x7);
+	/* 2 bits high */
+	class_val |= FIELD_PREP(DMA_CCTRL_CLASSH, (val >> 3) & 0x3);
+
+	spin_lock_irqsave(&d->dev_lock, flags);
+	ldma_update_bits(d, DMA_CS_MASK, c->nr, DMA_CS);
+	ldma_update_bits(d, DMA_CCTRL_CLASS | DMA_CCTRL_CLASSH, class_val,
+			 DMA_CCTRL);
+	spin_unlock_irqrestore(&d->dev_lock, flags);
+}
+
+static int ldma_chan_on(struct ldma_chan *c)
+{
+	struct ldma_dev *d = to_ldma_dev(c->vchan.chan.device);
+	unsigned long flags;
+
+	/* If descriptors not configured, not allow to turn on channel */
+	if (WARN_ON(!c->desc_init))
+		return -EINVAL;
+
+	spin_lock_irqsave(&d->dev_lock, flags);
+	ldma_update_bits(d, DMA_CS_MASK, c->nr, DMA_CS);
+	ldma_update_bits(d, DMA_CCTRL_ON, DMA_CCTRL_ON, DMA_CCTRL);
+	spin_unlock_irqrestore(&d->dev_lock, flags);
+
+	c->onoff = DMA_CH_ON;
+
+	return 0;
+}
+
+static int ldma_chan_off(struct ldma_chan *c)
+{
+	struct ldma_dev *d = to_ldma_dev(c->vchan.chan.device);
+	unsigned long flags;
+	u32 val;
+	int ret;
+
+	spin_lock_irqsave(&d->dev_lock, flags);
+	ldma_update_bits(d, DMA_CS_MASK, c->nr, DMA_CS);
+	ldma_update_bits(d, DMA_CCTRL_ON, 0, DMA_CCTRL);
+	spin_unlock_irqrestore(&d->dev_lock, flags);
+
+	ret = readl_poll_timeout_atomic(d->base + DMA_CCTRL, val,
+					!(val & DMA_CCTRL_ON), 0, 10000);
+	if (ret)
+		return ret;
+
+	c->onoff = DMA_CH_OFF;
+
+	return 0;
+}
+
+static void ldma_chan_desc_hw_cfg(struct ldma_chan *c, dma_addr_t desc_base,
+				  int desc_num)
+{
+	struct ldma_dev *d = to_ldma_dev(c->vchan.chan.device);
+	unsigned long flags;
+
+	spin_lock_irqsave(&d->dev_lock, flags);
+	ldma_update_bits(d, DMA_CS_MASK, c->nr, DMA_CS);
+	writel(lower_32_bits(desc_base), d->base + DMA_CDBA);
+	/* High 4 bits */
+	if (IS_ENABLED(CONFIG_64BIT)) {
+		u32 hi = upper_32_bits(desc_base) & 0xF;
+
+		ldma_update_bits(d, DMA_CDBA_MSB,
+				 FIELD_PREP(DMA_CDBA_MSB, hi), DMA_CCTRL);
+	}
+	writel(desc_num, d->base + DMA_CDLEN);
+	spin_unlock_irqrestore(&d->dev_lock, flags);
+
+	c->desc_init = true;
+}
+
+/*
+ * Descriptor base address and data pointer must be physical address when
+ * writen to the register.
+ * This API will be used by CBM which configure hardware descriptor.
+ */
+static int ldma_chan_desc_cfg(struct ldma_chan *c, dma_addr_t desc_base,
+			      int desc_num)
+{
+	struct ldma_dev *d = to_ldma_dev(c->vchan.chan.device);
+
+	if (!desc_num) {
+		dev_err(d->dev, "Channel %d must allocate descriptor first\n",
+			c->nr);
+		return -EINVAL;
+	}
+
+	if (desc_num > DMA_MAX_DESC_NUM) {
+		dev_err(d->dev, "Channel %d descriptor number out of range %d\n",
+			c->nr, desc_num);
+		return -EINVAL;
+	}
+
+	ldma_chan_desc_hw_cfg(c, desc_base, desc_num);
+
+	c->flags |= DMA_HW_DESC;
+	c->desc_cnt = desc_num;
+	c->desc_phys = desc_base;
+
+	return 0;
+}
+
+int intel_dma_chan_desc_cfg(struct dma_chan *chan, dma_addr_t desc_base,
+			    int desc_num)
+{
+	return ldma_chan_desc_cfg(to_ldma_chan(chan), desc_base, desc_num);
+}
+EXPORT_SYMBOL_GPL(intel_dma_chan_desc_cfg);
+
+static int ldma_chan_reset(struct ldma_chan *c)
+{
+	struct ldma_dev *d = to_ldma_dev(c->vchan.chan.device);
+	unsigned long flags;
+	u32 val;
+	int ret;
+
+	ret = ldma_chan_off(c);
+	if (ret)
+		return ret;
+
+	spin_lock_irqsave(&d->dev_lock, flags);
+	ldma_update_bits(d, DMA_CS_MASK, c->nr, DMA_CS);
+	ldma_update_bits(d, DMA_CCTRL_RST, DMA_CCTRL_RST, DMA_CCTRL);
+	spin_unlock_irqrestore(&d->dev_lock, flags);
+
+	ret = readl_poll_timeout_atomic(d->base + DMA_CCTRL, val,
+					!(val & DMA_CCTRL_RST), 0, 10000);
+	if (ret)
+		return ret;
+
+	c->rst = 1;
+	c->desc_init = false;
+
+	return 0;
+}
+
+static void ldma_chan_polling_cfg(struct ldma_chan *c, u32 nonarb_cnt,
+				  u32 arb_cnt)
+{
+	struct ldma_dev *d = to_ldma_dev(c->vchan.chan.device);
+	unsigned long flags;
+	u32 val;
+
+	if (arb_cnt > nonarb_cnt)
+		return;
+
+	spin_lock_irqsave(&d->dev_lock, flags);
+	ldma_update_bits(d, DMA_CS_MASK, c->nr, DMA_CS);
+
+	if (nonarb_cnt && arb_cnt) {
+		val = FIELD_PREP(DMA_C_DP_TICK_TIKNARB, nonarb_cnt) |
+		      FIELD_PREP(DMA_C_DP_TICK_TIKARB, arb_cnt);
+		writel(val, d->base + DMA_C_DP_TICK);
+		/* Ensure counter ready, then enable it */
+		wmb();
+		ldma_update_bits(d, DMA_CCTRL_CH_POLL_EN,
+				 DMA_CCTRL_CH_POLL_EN, DMA_CCTRL);
+	} else {
+		writel(0, d->base + DMA_C_DP_TICK);
+		/* Ensure counter ready, then enable it */
+		wmb();
+		ldma_update_bits(d, DMA_CCTRL_CH_POLL_EN, 0, DMA_CCTRL);
+	}
+	spin_unlock_irqrestore(&d->dev_lock, flags);
+}
+
+static void ldma_chan_byte_offset_cfg(struct ldma_chan *c, u32 boff_len)
+{
+	struct ldma_dev *d = to_ldma_dev(c->vchan.chan.device);
+	u32 mask = DMA_C_BOFF_EN | DMA_C_BOFF_BOF_LEN;
+	unsigned long flags;
+	u32 val;
+
+	if (boff_len > 0 && boff_len <= DMA_CHAN_BOFF_MAX)
+		val = FIELD_PREP(DMA_C_BOFF_BOF_LEN, boff_len) | DMA_C_BOFF_EN;
+	else
+		val = 0;
+
+	spin_lock_irqsave(&d->dev_lock, flags);
+	ldma_update_bits(d, DMA_CS_MASK, c->nr, DMA_CS);
+	ldma_update_bits(d, mask, val, DMA_C_BOFF);
+	spin_unlock_irqrestore(&d->dev_lock, flags);
+}
+
+static void ldma_chan_data_endian_cfg(struct ldma_chan *c, bool enable,
+				      u32 endian_type)
+{
+	struct ldma_dev *d = to_ldma_dev(c->vchan.chan.device);
+	u32 mask = DMA_C_END_DE_EN | DMA_C_END_DATAENDI;
+	unsigned long flags;
+	u32 val;
+
+	if (enable)
+		val = DMA_C_END_DE_EN | FIELD_PREP(DMA_C_END_DATAENDI, endian_type);
+	else
+		val = 0;
+
+	spin_lock_irqsave(&d->dev_lock, flags);
+	ldma_update_bits(d, DMA_CS_MASK, c->nr, DMA_CS);
+	ldma_update_bits(d, mask, val, DMA_C_ENDIAN);
+	spin_unlock_irqrestore(&d->dev_lock, flags);
+}
+
+static void ldma_chan_desc_endian_cfg(struct ldma_chan *c, bool enable,
+				      u32 endian_type)
+{
+	struct ldma_dev *d = to_ldma_dev(c->vchan.chan.device);
+	u32 mask = DMA_C_END_DES_EN | DMA_C_END_DESENDI;
+	unsigned long flags;
+	u32 val;
+
+	if (enable)
+		val = DMA_C_END_DES_EN | FIELD_PREP(DMA_C_END_DESENDI, endian_type);
+	else
+		val = 0;
+
+	spin_lock_irqsave(&d->dev_lock, flags);
+	ldma_update_bits(d, DMA_CS_MASK, c->nr, DMA_CS);
+	ldma_update_bits(d, mask, val, DMA_C_ENDIAN);
+	spin_unlock_irqrestore(&d->dev_lock, flags);
+}
+
+static void ldma_chan_hdr_mode_cfg(struct ldma_chan *c, u32 hdr_len, bool csum)
+{
+	struct ldma_dev *d = to_ldma_dev(c->vchan.chan.device);
+
+	unsigned long flags;
+	u32 mask, val;
+
+	/* NB, csum disabled, hdr length must be provided */
+	if (!csum && (!hdr_len || hdr_len > DMA_HDR_LEN_MAX))
+		return;
+
+	mask = DMA_C_HDRM_HDR_SUM;
+	val = DMA_C_HDRM_HDR_SUM;
+
+	if (!csum && hdr_len)
+		val = hdr_len;
+
+	spin_lock_irqsave(&d->dev_lock, flags);
+	ldma_update_bits(d, DMA_CS_MASK, c->nr, DMA_CS);
+	ldma_update_bits(d, mask, val, DMA_C_HDRM);
+	spin_unlock_irqrestore(&d->dev_lock, flags);
+}
+
+static void ldma_chan_rxwr_np_cfg(struct ldma_chan *c, bool enable)
+{
+	struct ldma_dev *d = to_ldma_dev(c->vchan.chan.device);
+	unsigned long flags;
+	u32 mask, val;
+
+	/* Only valid for RX channel */
+	if (ldma_chan_tx(c))
+		return;
+
+	mask = DMA_CCTRL_WR_NP_EN;
+	val = enable ? DMA_CCTRL_WR_NP_EN : 0;
+
+	spin_lock_irqsave(&d->dev_lock, flags);
+	ldma_update_bits(d, DMA_CS_MASK, c->nr, DMA_CS);
+	ldma_update_bits(d, mask, val, DMA_CCTRL);
+	spin_unlock_irqrestore(&d->dev_lock, flags);
+}
+
+static void ldma_chan_abc_cfg(struct ldma_chan *c, bool enable)
+{
+	struct ldma_dev *d = to_ldma_dev(c->vchan.chan.device);
+	unsigned long flags;
+	u32 mask, val;
+
+	if (d->ver < DMA_VER32 || ldma_chan_tx(c))
+		return;
+
+	mask = DMA_CCTRL_CH_ABC;
+	val = enable ? DMA_CCTRL_CH_ABC : 0;
+
+	spin_lock_irqsave(&d->dev_lock, flags);
+	ldma_update_bits(d, DMA_CS_MASK, c->nr, DMA_CS);
+	ldma_update_bits(d, mask, val, DMA_CCTRL);
+	spin_unlock_irqrestore(&d->dev_lock, flags);
+}
+
+static int ldma_port_cfg(struct ldma_port *p)
+{
+	unsigned long flags;
+	struct ldma_dev *d;
+	u32 reg;
+
+	d = p->ldev;
+	reg = p->flush_memcpy ? DMA_PCTRL_MEM_FLUSH : 0;
+	reg |= FIELD_PREP(DMA_PCTRL_TXENDI, p->txendi);
+	reg |= FIELD_PREP(DMA_PCTRL_RXENDI, p->rxendi);
+
+	if (d->ver == DMA_VER22) {
+		reg |= FIELD_PREP(DMA_PCTRL_TXBL, p->txbl);
+		reg |= FIELD_PREP(DMA_PCTRL_RXBL, p->rxbl);
+	} else {
+		reg |= FIELD_PREP(DMA_PCTRL_PDEN, p->pkt_drop);
+
+		if (p->txbl == DMA_BURSTL_32DW)
+			reg |= DMA_PCTRL_TXBL32;
+		else if (p->txbl == DMA_BURSTL_16DW)
+			reg |= DMA_PCTRL_TXBL16;
+		else
+			reg |= FIELD_PREP(DMA_PCTRL_TXBL, DMA_PCTRL_TXBL_8);
+
+		if (p->rxbl == DMA_BURSTL_32DW)
+			reg |= DMA_PCTRL_RXBL32;
+		else if (p->rxbl == DMA_BURSTL_16DW)
+			reg |= DMA_PCTRL_RXBL16;
+		else
+			reg |= FIELD_PREP(DMA_PCTRL_RXBL, DMA_PCTRL_RXBL_8);
+	}
+
+	spin_lock_irqsave(&d->dev_lock, flags);
+	writel(p->portid, d->base + DMA_PS);
+	writel(reg, d->base + DMA_PCTRL);
+	spin_unlock_irqrestore(&d->dev_lock, flags);
+
+	dev_dbg(d->dev, "%s Port Control 0x%08x configuration done\n",
+		p->name, readl(d->base + DMA_PCTRL));
+
+	return 0;
+}
+
+static int ldma_chan_cfg(struct ldma_chan *c)
+{
+	struct ldma_dev *d = to_ldma_dev(c->vchan.chan.device);
+	u32 reg;
+
+	reg = c->pden ? DMA_CCTRL_PDEN : 0;
+	reg |= c->onoff ? DMA_CCTRL_ON : 0;
+	reg |= c->rst ? DMA_CCTRL_RST : 0;
+
+	ldma_chan_cctrl_cfg(c, reg);
+	ldma_chan_irq_init(c);
+
+	if (d->ver > DMA_VER22) {
+		ldma_chan_set_class(c, c->nr);
+		ldma_chan_polling_cfg(c, c->nonarb_cnt, c->arb_cnt);
+		ldma_chan_byte_offset_cfg(c, c->boff_len);
+		ldma_chan_data_endian_cfg(c, c->data_endian_en, c->data_endian);
+		ldma_chan_desc_endian_cfg(c, c->desc_endian_en, c->desc_endian);
+		ldma_chan_hdr_mode_cfg(c, c->hdrm_len, c->hdrm_csum);
+		ldma_chan_rxwr_np_cfg(c, c->desc_rx_np);
+		ldma_chan_abc_cfg(c, c->abc_en);
+
+		if (ldma_chan_is_hw_desc(c))
+			ldma_chan_desc_hw_cfg(c, c->desc_phys, c->desc_cnt);
+	}
+
+	return 0;
+}
+
+static void ldma_dev_init(struct ldma_dev *d)
+{
+	struct ldma_port *p;
+	struct ldma_chan *c;
+	int i;
+
+	spin_lock_init(&d->dev_lock);
+	ldma_dev_reset(d);
+	ldma_dev_cfg(d);
+
+	/* DMA port initialization */
+	for (i = 0; i < d->port_nrs; i++) {
+		p = &d->ports[i];
+		ldma_port_cfg(p);
+	}
+
+	/* DMA channel initialization */
+	for (i = 0; i < d->chan_nrs; i++) {
+		c = &d->chans[i];
+		ldma_chan_cfg(c);
+	}
+}
+
+/*
+ * The configuration stored in the devicetree matches the configuration
+ * parameters of the peripheral instance and allows the driver to know which
+ * features are implemented and how it should behave. Users only configure
+ * what is necessary. All other setting will fall back to default setting
+ */
+static int dma_parse_chan_dt(struct fwnode_handle *fw_chan, struct ldma_dev *d)
+{
+	struct ldma_port *p;
+	struct ldma_chan *c;
+	u32 v[2], val;
+	int ret;
+
+	ret = fwnode_property_read_u32(fw_chan, "reg", &val);
+	if (ret)
+		return ret;
+
+	/* Sanity check for channel range */
+	if (val >= d->chan_nrs)
+		return -ENODEV;
+
+	c = &d->chans[val];
+
+	ret = fwnode_property_read_u32(fw_chan, "intel,desc_num", &c->desc_num);
+	if (ret || (!ret && c->desc_num > 255))
+		c->desc_num = DMA_DFT_DESC_NUM;
+
+	/* Default setting has been set before in case of error inputs */
+	if (!fwnode_property_read_u32(fw_chan, "intel,pkt-sz", &val)) {
+		if (val > DMA_MAX_PKT_SZ)
+			return -EINVAL;
+		c->pkt_sz = val;
+	}
+
+	if (!fwnode_property_read_u32(fw_chan, "intel,data-endian", &val)) {
+		if (val > DMA_ENDIAN_MAX)
+			return -EINVAL;
+		c->data_endian = val;
+	}
+
+	if (!fwnode_property_read_u32(fw_chan, "intel,desc-endian", &val)) {
+		if (val > DMA_ENDIAN_MAX)
+			return -EINVAL;
+		c->desc_endian = val;
+	}
+
+	if (fwnode_property_read_u32(fw_chan, "intel,byte-offset",
+				     &c->boff_len))
+		c->boff_len = 0;
+
+	if (fwnode_property_read_u32(fw_chan, "non-arb-cnt", &c->nonarb_cnt))
+		c->nonarb_cnt = 0;
+
+	if (fwnode_property_read_u32(fw_chan, "intel,arb-cnt", &c->arb_cnt))
+		c->arb_cnt = 0;
+
+	if (c->arb_cnt > c->nonarb_cnt) {
+		dev_err(d->dev, "arb cnt should be less than no arb cnt\n");
+		return -EINVAL;
+	}
+
+	if (!fwnode_property_read_u32_array(fw_chan, "intel,hdr-mode", v,
+					    ARRAY_SIZE(v))) {
+		c->hdrm_csum = !!v[1];
+		if (!c->hdrm_csum) {
+			if (!v[0] || v[0] > DMA_HDR_LEN_MAX)
+				return -EINVAL;
+		}
+		c->hdrm_len = v[0];
+	}
+
+	if (!fwnode_property_read_u32_array(fw_chan, "intel,chan-hw-desc", v,
+					    ARRAY_SIZE(v))) {
+		u32 cnt = v[1];
+
+		if (!cnt) {
+			dev_err(d->dev,
+				"Channel %d must allocate descriptor first\n",
+				c->nr);
+			return -EINVAL;
+		}
+
+		if (cnt > DMA_MAX_DESC_NUM) {
+			dev_err(d->dev,
+				"Channel %d descriptor number out of range %d\n",
+				c->nr, cnt);
+			return -EINVAL;
+		}
+		c->desc_phys = v[0];
+		c->desc_cnt = cnt;
+		c->flags |= DMA_HW_DESC;
+	}
+
+	/* If channel packet drop enabled, port packet drop should be enabled */
+	c->pden = fwnode_property_read_bool(fw_chan, "intel,pkt-drop");
+	if (c->pden) {
+		p = c->port;
+		/* Config once on the dma port packet drop */
+		if (!p->pden) {
+			p->pkt_drop = DMA_PKT_DROP_EN;
+			p->pden = true;
+		}
+	}
+
+	c->desc_rx_np = fwnode_property_read_bool(fw_chan,
+						  "intel,desc-rx-nonpost");
+	c->data_endian_en = fwnode_property_read_bool(fw_chan,
+						      "intel,data-endian-en");
+	c->desc_endian_en = fwnode_property_read_bool(fw_chan,
+						      "intel,data-endian-en");
+	return 0;
+}
+
+static unsigned int dma_get_channel_node_count(struct ldma_dev *d)
+{
+	struct fwnode_handle *fwnode = dev_fwnode(d->dev);
+	struct fwnode_handle *fw_chans;
+	struct fwnode_handle *child;
+	unsigned int count = 0;
+
+	fw_chans = fwnode_get_named_child_node(fwnode, "dma-channels");
+	fwnode_for_each_child_node(fw_chans, child)
+		count++;
+
+	return count;
+}
+
+static int dma_parse_port_dt(struct fwnode_handle *fw_port, struct ldma_dev *d)
+{
+	struct ldma_port *p;
+	u32 val, v[2];
+	int ret;
+
+	ret = fwnode_property_read_u32(fw_port, "reg", &val);
+	if (ret)
+		return ret;
+
+	/* Sanit check */
+	if (val >= d->port_nrs)
+		return -ENODEV;
+
+	p = &d->ports[val];
+
+	ret = fwnode_property_read_string(fw_port, "intel,name", &p->name);
+	if (ret) {
+		dev_err(d->dev, "Failed to get port name ret=%d\n", ret);
+		return ret;
+	}
+
+	ret = fwnode_property_read_u32_array(fw_port, "intel,chans", v,
+					     ARRAY_SIZE(v));
+	if (ret) {
+		dev_err(d->dev, "Failed to get port chan mapping ret=%d\n",
+			ret);
+		return ret;
+	}
+	p->chan_start = v[0];
+	p->chan_sz = v[1];
+
+	if (fwnode_property_read_u32(fw_port, "intel,burst", &p->txbl))
+		p->txbl = DMA_DFT_BURST_V22;
+
+	if (p->txbl != 2 && p->txbl != 4 && p->txbl != 8)
+		return -EINVAL;
+
+	/* TX and RX has the same burst length */
+	p->txbl = ilog2(p->txbl);
+	p->rxbl = p->txbl;
+
+	if (fwnode_property_read_u32(fw_port, "intel,endian", &p->txendi))
+		p->txendi = DMA_DFT_ENDIAN;
+
+	/* TX and RX has the same endianness */
+	p->rxendi = p->txendi;
+
+	if (fwnode_property_read_u32(fw_port, "intel,txwgt", &p->txwgt))
+		p->txwgt = DMA_TX_PORT_DFT_WGT;
+
+	if (!strncmp(p->name, "MEMCPY", 4))
+		p->flush_memcpy = 1;
+
+	/*
+	 * Get max available channels instead of reading from regsiters
+	 */
+	d->chan_nrs = dma_get_channel_node_count(d);
+
+	dev_dbg(d->dev, "Port %s burst %d endian %d txwgt %d\n",
+		p->name, p->rxbl, p->rxendi, p->txwgt);
+
+	return 0;
+}
+
+static int ldma_cfg_init(struct ldma_dev *d)
+{
+	struct fwnode_handle *fwnode = dev_fwnode(d->dev);
+	struct fwnode_handle *fw_chans, *fw_chan;
+	struct fwnode_handle *fw_ports, *fw_port;
+	struct ldma_chan *c;
+	struct ldma_port *p;
+	u32 prop, val;
+	int ret, i;
+
+	if (fwnode_property_read_bool(fwnode, "intel,dma-chan-fc"))
+		d->flags |= DMA_CHAN_FLOW_CTL;
+
+	if (fwnode_property_read_bool(fwnode, "intel,dma-desc-fod"))
+		d->flags |= DMA_DESC_FTOD;
+
+	if (fwnode_property_read_bool(fwnode, "intel,dma-desc-in-sram"))
+		d->flags |= DMA_DESC_IN_SRAM;
+
+	if (fwnode_property_read_bool(fwnode, "intel,dma-byte-en"))
+		d->flags |= DMA_EN_BYTE_EN;
+
+	if (fwnode_property_read_bool(fwnode, "intel,dma-dfetch-ack"))
+		d->flags |= DMA_VLD_FETCH_ACK;
+
+	if (fwnode_property_read_bool(fwnode, "intel,dma-dburst-wr"))
+		d->flags |= DMA_DBURST_WR;
+
+	if (fwnode_property_read_bool(fwnode, "intel,dma-drb"))
+		d->flags |= DMA_DFT_DRB;
+
+	if (fwnode_property_read_u32(fwnode, "intel,dma-polling-cnt",
+				     &d->pollcnt))
+		d->pollcnt = DMA_DFT_POLL_CNT;
+
+	if (!fwnode_property_read_u32(fwnode, "intel,dma-orrc", &val)) {
+		if (val > DMA_ORRC_MAX_CNT)
+			return -EINVAL;
+		d->orrc = val;
+	}
+
+	if (d->ver > DMA_VER22) {
+		if (!d->port_nrs)
+			return -EINVAL;
+
+		for (i = 0; i < d->port_nrs; i++) {
+			p = &d->ports[i];
+			p->rxendi = DMA_DFT_ENDIAN;
+			p->txendi = DMA_DFT_ENDIAN;
+
+			if (!fwnode_property_read_u32(fwnode, "intel,dma-burst",
+						      &prop)) {
+				p->rxbl = prop;
+				p->txbl = prop;
+			} else {
+				p->rxbl = DMA_DFT_BURST;
+				p->txbl = DMA_DFT_BURST;
+			}
+
+			p->pkt_drop = DMA_PKT_DROP_DIS;
+			p->flush_memcpy = 0;
+		}
+	}
+
+	/* Port specific, required for dma0 */
+	fw_ports = fwnode_get_named_child_node(fwnode, "dma-ports");
+	if (!fw_ports && d->ver == DMA_VER22) {
+		dev_err(d->dev, "Failed to get ports settings\n");
+		return -ENODEV;
+	}
+	if (fw_ports) {
+		fwnode_for_each_child_node(fw_ports, fw_port) {
+			ret = dma_parse_port_dt(fw_port, d);
+			if (ret) {
+				fwnode_handle_put(fw_port);
+				fwnode_handle_put(fw_ports);
+				return -EINVAL;
+			}
+		}
+		fwnode_handle_put(fw_ports);
+	}
+
+	d->chans = devm_kcalloc(d->dev, d->chan_nrs, sizeof(*c), GFP_KERNEL);
+	if (!d->chans)
+		return -ENOMEM;
+
+	/* Channel based configuration if available, optional */
+	fw_chans = fwnode_get_named_child_node(fwnode, "dma-channels");
+	if (fw_chans) {
+		fwnode_for_each_child_node(fw_chans, fw_chan) {
+			if (dma_parse_chan_dt(fw_chan, d)) {
+				fwnode_handle_put(fw_chan);
+				fwnode_handle_put(fw_chans);
+				return -EINVAL;
+			}
+		}
+		fwnode_handle_put(fw_chans);
+	}
+
+	return 0;
+}
+
+static void dma_free_desc_resource(struct ldma_chan *c)
+{
+	struct dw2_desc_sw *ds = c->ds;
+
+	dma_pool_free(c->desc_pool, ds->desc_hw, ds->desc_phys);
+	kfree(ds);
+	c->ds = NULL;
+}
+
+static struct dw2_desc_sw *
+dma_alloc_desc_resource(int num, struct ldma_chan *c)
+{
+	struct device *dev = c->vchan.chan.device->dev;
+	struct dw2_desc_sw *ds;
+
+	if (num > c->desc_num) {
+		dev_err(dev, "sg num %d exceed max %d\n", num, c->desc_num);
+		return NULL;
+	}
+
+	ds = kzalloc(sizeof(*ds), GFP_NOWAIT);
+	if (!ds)
+		return NULL;
+
+	ds->chan = c;
+
+	ds->desc_hw = dma_pool_zalloc(c->desc_pool, GFP_ATOMIC,
+				      &ds->desc_phys);
+	if (!ds->desc_hw) {
+		dev_dbg(dev, "out of memory for link descriptor\n");
+		kfree(ds);
+		return NULL;
+	}
+	ds->desc_cnt = num;
+
+	return ds;
+}
+
+static void ldma_chan_irq_en(struct ldma_chan *c)
+{
+	struct ldma_dev *d = to_ldma_dev(c->vchan.chan.device);
+	unsigned long flags;
+
+	spin_lock_irqsave(&d->dev_lock, flags);
+	writel(c->nr, d->base + DMA_CS);
+	writel(DMA_CI_EOP, d->base + DMA_CIE);
+	ldma_update_bits(d, 0, BIT(c->nr), DMA_IRNEN);
+	spin_unlock_irqrestore(&d->dev_lock, flags);
+}
+
+static void dma_issue_pending(struct dma_chan *chan)
+{
+	struct ldma_chan *c = to_ldma_chan(chan);
+	struct ldma_dev *d = to_ldma_dev(c->vchan.chan.device);
+	struct dw2_desc_sw *ds = c->ds;
+
+	if (d->ver == DMA_VER22) {
+		ldma_chan_desc_hw_cfg(c, ds->desc_phys, ds->desc_cnt);
+		ldma_chan_irq_en(c);
+	}
+	ldma_chan_on(c);
+}
+
+static void dma_synchronize(struct dma_chan *chan)
+{
+	struct ldma_chan *c = to_ldma_chan(chan);
+
+	/*
+	 * clear any pending work if any. In that
+	 * case the resource needs to be free here.
+	 */
+	cancel_work_sync(&c->work);
+	if (c->ds)
+		dma_free_desc_resource(c);
+}
+
+static int dma_terminate_all(struct dma_chan *chan)
+{
+	struct ldma_chan *c = to_ldma_chan(chan);
+
+	return ldma_chan_reset(c);
+}
+
+static int dma_resume_chan(struct dma_chan *chan)
+{
+	struct ldma_chan *c = to_ldma_chan(chan);
+
+	ldma_chan_on(c);
+
+	return 0;
+}
+
+static int dma_pause_chan(struct dma_chan *chan)
+{
+	struct ldma_chan *c = to_ldma_chan(chan);
+
+	return ldma_chan_off(c);
+}
+
+static enum dma_status
+dma_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
+	      struct dma_tx_state *txstate)
+{
+	struct ldma_chan *c = to_ldma_chan(chan);
+	struct ldma_dev *d = to_ldma_dev(c->vchan.chan.device);
+	enum dma_status status = DMA_COMPLETE;
+
+	if (d->ver == DMA_VER22)
+		status = dma_cookie_status(chan, cookie, txstate);
+
+	return status;
+}
+
+static dma_cookie_t dma_tx_submit(struct dma_async_tx_descriptor *tx)
+{
+	return dma_cookie_assign(tx);
+}
+
+static void dma_chan_irq(int irq, void *data)
+{
+	struct ldma_chan *c = data;
+	struct ldma_dev *d = to_ldma_dev(c->vchan.chan.device);
+	u32 stat;
+
+	/* Disable channel interrupts  */
+	writel(c->nr, d->base + DMA_CS);
+	stat = readl(d->base + DMA_CIS);
+	if (!stat)
+		return;
+
+	ldma_update_bits(d, DMA_CI_ALL, 0, DMA_CIE);
+	writel(stat, d->base + DMA_CIS);
+	queue_work(d->wq, &c->work);
+}
+
+static irqreturn_t dma_interrupt(int irq, void *dev_id)
+{
+	struct ldma_dev *d = dev_id;
+	struct ldma_chan *c;
+	unsigned long irncr;
+	u32 cid;
+
+	irncr = readl(d->base + DMA_IRNCR);
+	if (!irncr) {
+		dev_err(d->dev, "dummy interrupt\n");
+		return IRQ_NONE;
+	}
+
+	for_each_set_bit(cid, &irncr, d->chan_nrs) {
+		/* Mask */
+		ldma_update_bits(d, BIT(cid), 0, DMA_IRNEN);
+		/* Ack */
+		ldma_update_bits(d, 0, BIT(cid), DMA_IRNCR);
+
+		c = &d->chans[cid];
+		dma_chan_irq(irq, c);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static struct dma_async_tx_descriptor *
+dma_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
+		  unsigned int sglen, enum dma_transfer_direction dir,
+		  unsigned long flags, void *context)
+{
+	struct ldma_chan *c = to_ldma_chan(chan);
+	size_t len, avail, total = 0;
+	struct dw2_desc *hw_ds;
+	struct dw2_desc_sw *ds;
+	struct scatterlist *sg;
+	int num = sglen, i;
+	dma_addr_t addr;
+
+	if (!sgl)
+		return NULL;
+
+	for_each_sg(sgl, sg, sglen, i) {
+		avail = sg_dma_len(sg);
+		if (avail > DMA_MAX_SIZE)
+			num += DIV_ROUND_UP(avail, DMA_MAX_SIZE) - 1;
+	}
+
+	ds = dma_alloc_desc_resource(num, c);
+	if (!ds)
+		return NULL;
+
+	c->ds = ds;
+
+	num = 0;
+	/* sop and eop has to be handled nicely */
+	for_each_sg(sgl, sg, sglen, i) {
+		addr = sg_dma_address(sg);
+		avail = sg_dma_len(sg);
+		total += avail;
+
+		do {
+			len = min_t(size_t, avail, DMA_MAX_SIZE);
+
+			hw_ds = &ds->desc_hw[num];
+			switch (sglen) {
+			case 1:
+				hw_ds->status.field.sop = 1;
+				hw_ds->status.field.eop = 1;
+				break;
+			default:
+				if (num == 0) {
+					hw_ds->status.field.sop = 1;
+					hw_ds->status.field.eop = 0;
+				} else if (num == (sglen - 1)) {
+					hw_ds->status.field.sop = 0;
+					hw_ds->status.field.eop = 1;
+				} else {
+					hw_ds->status.field.sop = 0;
+					hw_ds->status.field.eop = 0;
+				}
+				break;
+			}
+
+			/* Only 32 bit address supported */
+			hw_ds->addr = (u32)addr;
+			hw_ds->status.field.len = len;
+			hw_ds->status.field.c = 0;
+			hw_ds->status.field.bofs = addr & 0x3;
+			/* Ensure data ready before ownership change */
+			wmb();
+			hw_ds->status.field.own = DMA_OWN;
+			/* Ensure ownership changed before moving forward */
+			wmb();
+			num++;
+			addr += len;
+			avail -= len;
+		} while (avail);
+	}
+
+	ds->size = total;
+
+	dma_async_tx_descriptor_init(&ds->async_tx, &c->vchan.chan);
+	ds->async_tx.tx_submit = dma_tx_submit;
+	ds->async_tx.flags = DMA_CTRL_ACK;
+
+	return &ds->async_tx;
+}
+
+static int
+dma_slave_config(struct dma_chan *chan, struct dma_slave_config *cfg)
+{
+	struct ldma_chan *c = to_ldma_chan(chan);
+	struct ldma_dev *d = to_ldma_dev(c->vchan.chan.device);
+	struct ldma_port *p = c->port;
+	unsigned long flags;
+	u32 bl;
+
+	if ((cfg->direction == DMA_DEV_TO_MEM &&
+	     cfg->src_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES) ||
+	    (cfg->direction == DMA_MEM_TO_DEV &&
+	     cfg->dst_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES) ||
+	    !is_slave_direction(cfg->direction))
+		return -EINVAL;
+
+	/* Default setting will be used */
+	if (!cfg->src_maxburst && !cfg->dst_maxburst)
+		return 0;
+
+	/* Must be the same */
+	if (cfg->src_maxburst && cfg->dst_maxburst &&
+	    cfg->src_maxburst != cfg->dst_maxburst)
+		return -EINVAL;
+
+	if (cfg->dst_maxburst)
+		cfg->src_maxburst = cfg->dst_maxburst;
+
+	bl = ilog2(cfg->src_maxburst);
+
+	spin_lock_irqsave(&d->dev_lock, flags);
+	writel(p->portid, d->base + DMA_PS);
+	ldma_update_bits(d, DMA_PCTRL_RXBL | DMA_PCTRL_TXBL,
+			 FIELD_PREP(DMA_PCTRL_RXBL, bl) |
+			 FIELD_PREP(DMA_PCTRL_TXBL, bl), DMA_PCTRL);
+	spin_unlock_irqrestore(&d->dev_lock, flags);
+
+	return 0;
+}
+
+static int dma_alloc_chan_resources(struct dma_chan *chan)
+{
+	struct ldma_chan *c = to_ldma_chan(chan);
+	struct ldma_dev *d = to_ldma_dev(c->vchan.chan.device);
+	struct device *dev = c->vchan.chan.device->dev;
+	size_t	desc_sz;
+
+	if (d->ver > DMA_VER22) {
+		c->flags |= CHAN_IN_USE;
+		return 0;
+	}
+
+	if (c->desc_pool)
+		return c->desc_num;
+
+	desc_sz = c->desc_num * sizeof(struct dw2_desc);
+	c->desc_pool = dma_pool_create(c->name, dev, desc_sz,
+				       __alignof__(struct dw2_desc), 0);
+
+	if (!c->desc_pool) {
+		dev_err(dev, "unable to allocate descriptor pool\n");
+		return -ENOMEM;
+	}
+
+	return c->desc_num;
+}
+
+static void dma_free_chan_resources(struct dma_chan *chan)
+{
+	struct ldma_chan *c = to_ldma_chan(chan);
+	struct ldma_dev *d = to_ldma_dev(c->vchan.chan.device);
+
+	if (d->ver == DMA_VER22) {
+		dma_pool_destroy(c->desc_pool);
+		c->desc_pool = NULL;
+		ldma_chan_reset(c);
+	} else {
+		c->flags &= ~CHAN_IN_USE;
+	}
+}
+
+static void dma_work(struct work_struct *work)
+{
+	struct ldma_chan *c = container_of(work, struct ldma_chan, work);
+	struct dma_async_tx_descriptor *tx = &c->ds->async_tx;
+	struct dmaengine_desc_callback cb;
+
+	dmaengine_desc_get_callback(tx, &cb);
+	dma_cookie_complete(tx);
+	dmaengine_desc_callback_invoke(&cb, NULL);
+	dma_free_desc_resource(c);
+}
+
+static struct dma_chan *ldma_xlate(struct of_phandle_args *spec,
+				   struct of_dma *ofdma)
+{
+	struct ldma_dev *d = ofdma->of_dma_data;
+	u32 chan_id =  spec->args[0];
+
+	if (spec->args_count != 1 || chan_id >= d->chan_nrs)
+		return NULL;
+
+	return dma_get_slave_channel(&d->chans[chan_id].vchan.chan);
+}
+
+static void ldma_clk_disable(void *data)
+{
+	struct ldma_dev *d = data;
+
+	clk_disable_unprepare(d->core_clk);
+}
+
+static struct dma_dev_ops dma0_ops = {
+	.device_alloc_chan_resources = dma_alloc_chan_resources,
+	.device_free_chan_resources = dma_free_chan_resources,
+	.device_config = dma_slave_config,
+	.device_prep_slave_sg = dma_prep_slave_sg,
+	.device_tx_status = dma_tx_status,
+	.device_pause = dma_pause_chan,
+	.device_resume = dma_resume_chan,
+	.device_terminate_all = dma_terminate_all,
+	.device_synchronize = dma_synchronize,
+	.device_issue_pending = dma_issue_pending,
+};
+
+static struct dma_dev_ops hdma_ops = {
+	.device_alloc_chan_resources = dma_alloc_chan_resources,
+	.device_free_chan_resources = dma_free_chan_resources,
+	.device_terminate_all = dma_terminate_all,
+	.device_issue_pending = dma_issue_pending,
+	.device_tx_status = dma_tx_status,
+	.device_resume = dma_resume_chan,
+	.device_pause = dma_pause_chan,
+};
+
+static const struct ldma_inst_data dma0 = {
+	.name = "dma0",
+	.ops = &dma0_ops,
+};
+
+static const struct ldma_inst_data dma2tx = {
+	.name = "dma2tx",
+	.type = DMA_TYPE_TX,
+	.ops = &hdma_ops,
+};
+
+static const struct ldma_inst_data dma1rx = {
+	.name = "dma1rx",
+	.type = DMA_TYPE_RX,
+	.ops = &hdma_ops,
+};
+
+static const struct ldma_inst_data dma1tx = {
+	.name = "dma1tx",
+	.type = DMA_TYPE_TX,
+	.ops = &hdma_ops,
+};
+
+static const struct ldma_inst_data dma0tx = {
+	.name = "dma0tx",
+	.type = DMA_TYPE_TX,
+	.ops = &hdma_ops,
+};
+
+static const struct ldma_inst_data dma3 = {
+	.name = "dma3",
+	.type = DMA_TYPE_MCPY,
+	.ops = &hdma_ops,
+};
+
+static const struct ldma_inst_data toe_dma30 = {
+	.name = "toe_dma30",
+	.type = DMA_TYPE_MCPY,
+	.ops = &hdma_ops,
+};
+
+static const struct ldma_inst_data toe_dma31 = {
+	.name = "toe_dma31",
+	.type = DMA_TYPE_MCPY,
+	.ops = &hdma_ops,
+};
+
+static const struct of_device_id intel_ldma_match[] = {
+	{ .compatible = "intel,lgm-cdma", .data = &dma0},
+	{ .compatible = "intel,lgm-dma2tx", .data = &dma2tx},
+	{ .compatible = "intel,lgm-dma1rx", .data = &dma1rx},
+	{ .compatible = "intel,lgm-dma1tx", .data = &dma1tx},
+	{ .compatible = "intel,lgm-dma0tx", .data = &dma0tx},
+	{ .compatible = "intel,lgm-dma3", .data = &dma3},
+	{ .compatible = "intel,lgm-toe-dma30", .data = &toe_dma30},
+	{ .compatible = "intel,lgm-toe-dma31", .data = &toe_dma31},
+	{}
+};
+
+static int intel_ldma_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct dma_device *dma_dev;
+	struct ldma_chan *c;
+	struct ldma_port *p;
+	struct ldma_dev *d;
+	u32 id, bitn = 32;
+	int i, j, k, ret;
+
+	d = devm_kzalloc(dev, sizeof(*d), GFP_KERNEL);
+	if (!d)
+		return -ENOMEM;
+
+	/* Link controller to platform device */
+	d->dev = &pdev->dev;
+
+	d->inst = device_get_match_data(dev);
+	if (!d->inst) {
+		dev_err(dev, "No device match found\n");
+		return -ENODEV;
+	}
+
+	d->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(d->base))
+		return PTR_ERR(d->base);
+
+	/* Power up and reset the dma engine, some DMAs always on?? */
+	d->core_clk = devm_clk_get_optional(dev, NULL);
+	if (IS_ERR(d->core_clk))
+		return PTR_ERR(d->core_clk);
+	clk_prepare_enable(d->core_clk);
+
+	ret = devm_add_action_or_reset(dev, ldma_clk_disable, d);
+	if (ret) {
+		dev_err(dev, "Failed to devm_add_action_or_reset, %d\n", ret);
+		return ret;
+	}
+
+	d->rst = devm_reset_control_get_optional(dev, NULL);
+	if (IS_ERR(d->rst))
+		return PTR_ERR(d->rst);
+	reset_control_deassert(d->rst);
+
+	id = readl(d->base + DMA_ID);
+	d->chan_nrs = FIELD_GET(DMA_ID_CHNR, id);
+	d->port_nrs = FIELD_GET(DMA_ID_PNR, id);
+	d->ver = FIELD_GET(DMA_ID_REV, id);
+
+	if (id & DMA_ID_AW_36B)
+		d->flags |= DMA_ADDR_36BIT;
+
+	if (IS_ENABLED(CONFIG_64BIT)) {
+		if (id & DMA_ID_AW_36B)
+			bitn = 36;
+	}
+
+	if (id & DMA_ID_DW_128B)
+		d->flags |= DMA_DATA_128BIT;
+
+	ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(bitn));
+	if (ret) {
+		dev_err(dev, "No usable DMA configuration\n");
+		return ret;
+	}
+
+	if (d->ver == DMA_VER22) {
+		d->irq = platform_get_irq(pdev, 0);
+		if (d->irq < 0)
+			return d->irq;
+
+		ret = devm_request_irq(&pdev->dev, d->irq, dma_interrupt,
+				       0, DRIVER_NAME, d);
+		if (ret)
+			return ret;
+
+		d->wq = alloc_ordered_workqueue("dma_wq", WQ_MEM_RECLAIM |
+						WQ_HIGHPRI);
+		if (!d->wq)
+			return -ENOMEM;
+	}
+
+	dma_dev = &d->dma_dev;
+	dma_cap_set(DMA_SLAVE, dma_dev->cap_mask);
+
+	/* Channel initializations */
+	INIT_LIST_HEAD(&dma_dev->channels);
+
+	/* Port Initializations */
+	d->ports = devm_kcalloc(dev, d->port_nrs, sizeof(*p), GFP_KERNEL);
+	if (!d->ports)
+		return -ENOMEM;
+
+	for (i = 0; i < d->port_nrs; i++) {
+		p = &d->ports[i];
+		p->portid = i;
+		p->ldev = d;
+	}
+
+	ret = ldma_cfg_init(d);
+	if (ret)
+		return ret;
+
+	dma_dev->dev = &pdev->dev;
+	/*
+	 * Link channel id to channel index and link to dma channel list
+	 * It also back points to controller and its port
+	 */
+	for (i = 0, k = 0; i < d->port_nrs; i++) {
+		if (d->ver == DMA_VER22) {
+			u32 chan_end;
+
+			p = &d->ports[i];
+			chan_end = p->chan_start + p->chan_sz;
+			for (j = p->chan_start; j < chan_end; j++) {
+				c = &d->chans[k];
+				c->port = p;
+				c->nr = j; /* Real channel number */
+				c->rst = DMA_CHAN_RST;
+				snprintf(c->name, sizeof(c->name), "chan%d",
+					 c->nr);
+				INIT_WORK(&c->work, dma_work);
+				vchan_init(&c->vchan, dma_dev);
+				k++;
+			}
+		} else {
+			p = &d->ports[i];
+			for (i = 0; i < d->chan_nrs; i++) {
+				c = &d->chans[i];
+				c->port = p;
+				c->data_endian = DMA_DFT_ENDIAN;
+				c->desc_endian = DMA_DFT_ENDIAN;
+				c->flags |= DEVICE_ALLOC_DESC;
+				c->pkt_sz = DMA_PKT_SZ_DFT;
+				c->onoff = DMA_CH_OFF;
+				c->rst = DMA_CHAN_RST;
+				c->abc_en = true;
+				c->nr = i;
+				vchan_init(&c->vchan, dma_dev);
+			}
+		}
+	}
+
+	/* Set DMA capabilities */
+	dma_cap_zero(dma_dev->cap_mask);
+
+	dma_dev->device_alloc_chan_resources =
+		d->inst->ops->device_alloc_chan_resources;
+	dma_dev->device_free_chan_resources =
+		d->inst->ops->device_free_chan_resources;
+	dma_dev->device_terminate_all = d->inst->ops->device_terminate_all;
+	dma_dev->device_issue_pending = d->inst->ops->device_issue_pending;
+	dma_dev->device_tx_status = d->inst->ops->device_tx_status;
+	dma_dev->device_resume = d->inst->ops->device_resume;
+	dma_dev->device_pause = d->inst->ops->device_pause;
+	dma_dev->device_config = d->inst->ops->device_config;
+	dma_dev->device_prep_slave_sg = d->inst->ops->device_prep_slave_sg;
+	dma_dev->device_synchronize = d->inst->ops->device_synchronize;
+
+	if (d->ver == DMA_VER22) {
+		dma_dev->src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
+		dma_dev->dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
+		dma_dev->directions = BIT(DMA_MEM_TO_DEV) |
+				      BIT(DMA_DEV_TO_MEM);
+		dma_dev->residue_granularity =
+					DMA_RESIDUE_GRANULARITY_DESCRIPTOR;
+	}
+
+	platform_set_drvdata(pdev, d);
+
+	ldma_dev_init(d);
+
+	ret = dma_async_device_register(dma_dev);
+	if (ret) {
+		dev_err(dev, "Failed to register slave DMA engine device\n");
+		return ret;
+	}
+
+	ret = of_dma_controller_register(pdev->dev.of_node, ldma_xlate, d);
+	if (ret) {
+		dev_err(dev, "Failed to register of DMA controller\n");
+		dma_async_device_unregister(dma_dev);
+		return ret;
+	}
+
+	dev_info(dev, "Init done - rev: %x, ports: %d channels: %d\n", d->ver,
+		 d->port_nrs, d->chan_nrs);
+
+	return 0;
+}
+
+static struct platform_driver intel_ldma_driver = {
+	.probe = intel_ldma_probe,
+	.driver = {
+		.name = DRIVER_NAME,
+		.of_match_table = intel_ldma_match,
+	},
+};
+
+static int __init intel_ldma_init(void)
+{
+	return platform_driver_register(&intel_ldma_driver);
+}
+
+device_initcall(intel_ldma_init);
diff --git a/include/linux/dma/lgm_dma.h b/include/linux/dma/lgm_dma.h
new file mode 100644
index 000000000000..3a2ee6ad0710
--- /dev/null
+++ b/include/linux/dma/lgm_dma.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2016 ~ 2019 Intel Corporation.
+ */
+#ifndef LGM_DMA_H
+#define LGM_DMA_H
+
+#include <linux/types.h>
+#include <linux/dmaengine.h>
+
+/*!
+ * \fn int intel_dma_chan_desc_cfg(struct dma_chan *chan, dma_addr_t desc_base,
+ *                                 int desc_num)
+ * \brief Configure low level channel descriptors
+ * \param[in] chan   pointer to DMA channel that the client is using
+ * \param[in] desc_base   descriptor base physical address
+ * \param[in] desc_num   number of descriptors
+ * \return   0 on success
+ * \return   kernel bug reported on failure
+ *
+ * This function configure the low level channel descriptors. It will be
+ * used by CBM whose descriptor is not DDR, actually some registers.
+ */
+int intel_dma_chan_desc_cfg(struct dma_chan *chan, dma_addr_t desc_base,
+			    int desc_num);
+
+#endif /* LGM_DMA_H */
-- 
2.11.0


^ permalink raw reply	[flat|nested] 10+ messages in thread

* RE: [PATCH v4 1/2] dt-bindings: dma: Add bindings for intel LGM SOC
  2020-07-09  6:01 ` [PATCH v4 1/2] dt-bindings: dma: Add bindings for intel LGM SOC Amireddy Mallikarjuna reddy
@ 2020-07-09  7:54   ` Langer, Thomas
  2020-07-13  3:39     ` Reddy, MallikarjunaX
  0 siblings, 1 reply; 10+ messages in thread
From: Langer, Thomas @ 2020-07-09  7:54 UTC (permalink / raw)
  To: Amireddy Mallikarjuna reddy, dmaengine, vkoul, devicetree, robh+dt
  Cc: linux-kernel, Shevchenko, Andriy, chuanhua.lei, Kim, Cheol Yong,
	Wu, Qiming, malliamireddy009



> -----Original Message-----
> From: devicetree-owner@vger.kernel.org <devicetree-
> owner@vger.kernel.org> On Behalf Of Amireddy Mallikarjuna reddy
> Sent: Donnerstag, 9. Juli 2020 08:01
> To: dmaengine@vger.kernel.org; vkoul@kernel.org;
> devicetree@vger.kernel.org; robh+dt@kernel.org
> Cc: linux-kernel@vger.kernel.org; Shevchenko, Andriy
> <andriy.shevchenko@intel.com>; chuanhua.lei@linux.intel.com; Kim, Cheol
> Yong <cheol.yong.kim@intel.com>; Wu, Qiming <qi-ming.wu@intel.com>;
> malliamireddy009@gmail.com; Amireddy Mallikarjuna reddy
> <mallikarjunax.reddy@linux.intel.com>
> Subject: [PATCH v4 1/2] dt-bindings: dma: Add bindings for intel LGM SOC
> 
> Add DT bindings YAML schema for DMA controller driver
> of Lightning Mountain(LGM) SoC.
> 
> Signed-off-by: Amireddy Mallikarjuna reddy
> <mallikarjunax.reddy@linux.intel.com>
> ---
> v1:
> - Initial version.
> 
> v2:
> - Fix bot errors.
> 
> v3:
> - No change.
> 
> v4:
> - Address Thomas langer comments

Please read my comments again and then respond about the topics you ignored.
I added some hints below again.

Thanks.

> ---
>  .../devicetree/bindings/dma/intel,ldma.yaml        | 416
> +++++++++++++++++++++
>  1 file changed, 416 insertions(+)
>  create mode 100644
> Documentation/devicetree/bindings/dma/intel,ldma.yaml
> 
> diff --git a/Documentation/devicetree/bindings/dma/intel,ldma.yaml
> b/Documentation/devicetree/bindings/dma/intel,ldma.yaml
> new file mode 100644
> index 000000000000..7f666b9812e4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dma/intel,ldma.yaml
> @@ -0,0 +1,416 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/dma/intel,ldma.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Lightning Mountain centralized low speed DMA and high speed DMA
> controllers.
> +
> +maintainers:
> +  - chuanhua.lei@intel.com
> +  - mallikarjunax.reddy@intel.com
> +
> +properties:
> + $nodename:
> +   pattern: "^dma(@.*)?$"

Please explain the difference to the common dma binding.

> +
> + "#dma-cells":
> +   const: 1
> +
> + compatible:
> +  anyOf:
> +   - const: intel,lgm-cdma
> +   - const: intel,lgm-dma2tx
> +   - const: intel,lgm-dma1rx
> +   - const: intel,lgm-dma1tx
> +   - const: intel,lgm-dma0tx
> +   - const: intel,lgm-dma3
> +   - const: intel,lgm-toe-dma30
> +   - const: intel,lgm-toe-dma31

Please explain why you need so many different compatible strings.

> +
> + reg:
> +  maxItems: 1
> +
> + clocks:
> +  maxItems: 1
> +
> + resets:
> +  maxItems: 1
> +
> + interrupts:
> +  maxItems: 1
> +
> + intel,dma-poll-cnt:
> +   $ref: /schemas/types.yaml#definitions/uint32
> +   description:
> +     DMA descriptor polling counter. It may need fine tune according
> +     to the system application scenario.
> +
> + intel,dma-byte-en:
> +   type: boolean
> +   description:
> +     DMA byte enable is only valid for DMA write(RX).
> +     Byte enable(1) means DMA write will be based on the number of
> dwords
> +     instead of the whole burst.
> +
> + intel,dma-drb:
> +    type: boolean
> +    description:
> +      DMA descriptor read back to make sure data and desc
> synchronization.
> +
> + intel,dma-burst:
> +    $ref: /schemas/types.yaml#definitions/uint32
> +    description:
> +       Specifiy the DMA burst size(in dwords), the valid value will be
> 8, 16, 32.
> +       Default is 16 for data path dma, 32 is for memcopy DMA.
> +
> + intel,dma-polling-cnt:
> +    $ref: /schemas/types.yaml#definitions/uint32
> +    description:
> +       DMA descriptor polling counter. It may need fine tune according
> to
> +       the system application scenario.
> +
> + intel,dma-desc-in-sram:
> +    type: boolean
> +    description:
> +       DMA descritpors in SRAM or not. Some old controllers descriptors
> +       can be in DRAM or SRAM. The new ones are all in SRAM.
> +
> + intel,dma-orrc:
> +    $ref: /schemas/types.yaml#definitions/uint32
> +    description:
> +       DMA outstanding read counter. The maximum value is 16, and it
> may
> +       need fine tune according to the system application scenarios.
> +
> + intel,dma-dburst-wr:
> +    type: boolean
> +    description:
> +       Enable RX dynamic burst write. It only applies to RX DMA and
> memcopy DMA.
> +
> +
> + dma-ports:
> +    type: object
> +    description:
> +       This sub-node must contain a sub-node for each DMA port.
> +    properties:
> +      '#address-cells':
> +        const: 1
> +      '#size-cells':
> +        const: 0
> +
> +    patternProperties:
> +      "^dma-ports@[0-9]+$":
> +          type: object
> +
> +          properties:
> +            reg:
> +              items:
> +                - enum: [0, 1, 2, 3, 4, 5]
> +              description:
> +                 Which port this node refers to.
> +
> +            intel,name:
> +              $ref: /schemas/types.yaml#definitions/string-array
> +              description:
> +                 Port name of each DMA port.
> +
> +            intel,chans:
> +              $ref: /schemas/types.yaml#/definitions/uint32-array
> +              description:
> +                 The channels included on this port. Format is channel
> start
> +                 number and how many channels on this port.
> +
> +            intel,burst:
> +              $ref: /schemas/types.yaml#/definitions/uint32
> +              description:
> +                 Specify the DMA port burst size, the valid value will
> be
> +                 2, 4, 8. Default is 2 for data path dma.
> +
> +            intel,txwgt:
> +              $ref: /schemas/types.yaml#/definitions/uint32
> +              description:
> +                 Specify the port transmit weight for QoS purpose. The
> valid
> +                 value is 1~7. Default value is 1.
> +
> +            intel,endian:
> +              $ref: /schemas/types.yaml#/definitions/uint32
> +              description:
> +                 Specify the DMA port endiannes conversion due to SoC
> endianness difference.
> +
> +          required:
> +            - reg
> +            - intel,name
> +            - intel,chans
> +
> +
> + dma-channels:
> +    type: object
> +    description:
> +       This sub-node must contain a sub-node for each DMA channel.
> +    properties:
> +      '#address-cells':
> +        const: 1
> +      '#size-cells':
> +        const: 0
> +
> +    patternProperties:
> +      "^dma-channels@[0-9]+$":
> +          type: object
> +
> +          properties:
> +            reg:
> +              items:
> +                - enum: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13,
> 14, 15]
> +              description:
> +                 Which channel this node refers to.
> +
> +            intel,desc_num:
> +              $ref: /schemas/types.yaml#/definitions/uint32
> +              description:
> +                 Per channel maximum descriptor number. The max value
> is 255.
> +
> +            intel,pkt_sz:
> +              $ref: /schemas/types.yaml#/definitions/uint32
> +              description:
> +                 Channel buffer packet size. It must be power of 2.
> +                 The maximum size is 4096.
> +
> +            intel,desc-rx-nonpost:
> +              type: boolean
> +              description:
> +                 Write non-posted type for DMA RX last data beat of
> every descriptor.
> +
> +            intel,data-endian:
> +              $ref: /schemas/types.yaml#/definitions/uint32
> +              description:
> +                 Per channel data endianness configuration according to
> SoC requirement.
> +
> +            intel,desc-endian:
> +              $ref: /schemas/types.yaml#/definitions/uint32
> +              description:
> +                 Per channel descriptor endianness configuration
> according to SoC requirement.
> +
> +            intel,data-endian-en:
> +              type: boolean
> +              description:
> +                 Per channel data endianness enabled.
> +
> +            intel,desc-endian-en:
> +              type: boolean
> +              description:
> +                 Per channel descriptor endianness enabled.
> +
> +            intel,byte-offset:
> +              $ref: /schemas/types.yaml#/definitions/uint32
> +              description:
> +                 Per channel byte offset(0~128).
> +
> +            intel,hdr-mode:
> +              $ref: /schemas/types.yaml#/definitions/uint32-array
> +              description:
> +                 The first parameter is header mode size, the second
> +                 parameter is checksum enable or disable. If enabled,
> +                 header mode size is ignored. If disabled, header mode
> +                 size must be provided.
> +
> +            intel,non-arb-cnt:
> +              $ref: /schemas/types.yaml#/definitions/uint32
> +              description:
> +                 Per channel non arbitration counter while polling
> +
> +            intel,arb-cnt:
> +              $ref: /schemas/types.yaml#/definitions/uint32
> +              description:
> +                 Per channel arbitration counter while polling.
> +                 arb_cnt must be greater than non_arb_cnt
> +
> +            intel,pkt-drop:
> +              type: boolean
> +              description:
> +                 Channel packet drop enabled or disabled.
> +
> +            intel,hw-desc:
> +              $ref: /schemas/types.yaml#/definitions/uint32-array
> +              description:
> +                 Per channel dma hardware descriptor configuration.
> +                 The first parameter is descriptor physical address and
> the
> +                 second parameter hardware descriptor number.
> +
> +          required:
> +            - reg
> +
> +required:
> + - compatible
> + - reg
> + - '#dma-cells'
> +
> +examples:
> + - |
> +   dma0: dma@e0e00000 {
> +     compatible = "intel,lgm-cdma";
> +     reg = <0xe0e00000 0x1000>;
> +     #dma-cells = <1>;
> +     interrupt-parent = <&ioapic1>;
> +     interrupts = <82 1>;
> +     resets = <&rcu0 0x30 0>;
> +     reset-names = "ctrl";
> +     clocks = <&cgu0 80>;
> +     intel,dma-poll-cnt = <4>;
> +     intel,dma-byte-en;
> +     intel,dma-drb;
> +     dma-ports {
> +       #address-cells = <1>;
> +       #size-cells = <0>;
> +
> +       dma-ports@0 {
> +           reg = <0>;
> +           intel,name = "SPI0";
> +           intel,chans = <0 2>;
> +           intel,burst = <2>;
> +           intel,txwgt = <1>;
> +       };
> +       dma-ports@1 {
> +           reg = <1>;
> +           intel,name = "SPI1";
> +           intel,chans = <2 2>;
> +           intel,burst = <2>;
> +           intel,txwgt = <1>;
> +       };
> +       dma-ports@2 {
> +           reg = <2>;
> +           intel,name = "SPI2";
> +           intel,chans = <4 2>;
> +           intel,burst = <2>;
> +           intel,txwgt = <1>;
> +       };
> +       dma-ports@3 {
> +           reg = <3>;
> +           intel,name = "SPI3";
> +           intel,chans = <6 2>;
> +           intel,burst = <2>;
> +           intel,endian = <0>;
> +           intel,txwgt = <1>;
> +       };
> +       dma-ports@4 {
> +           reg = <4>;
> +           intel,name = "HSNAND";
> +           intel,chans = <8 2>;
> +           intel,burst = <8>;
> +           intel,txwgt = <1>;
> +       };
> +       dma-ports@5 {
> +           reg = <5>;
> +           intel,name = "PCM";
> +           intel,chans = <10 6>;
> +           intel,burst = <8>;
> +           intel,txwgt = <1>;
> +       };
> +     };
> +     dma-channels {
> +       #address-cells = <1>;
> +       #size-cells = <0>;
> +
> +       dma-channels@0 {
> +           reg = <0>;
> +           intel,desc_num = <1>;
> +       };
> +       dma-channels@1 {
> +           reg = <1>;
> +           intel,desc_num = <1>;
> +       };
> +       dma-channels@2 {
> +           reg = <2>;
> +           intel,desc_num = <1>;
> +       };
> +       dma-channels@3 {
> +           reg = <3>;
> +           intel,desc_num = <1>;
> +       };
> +       dma-channels@4 {
> +           reg = <4>;
> +           intel,desc_num = <1>;
> +       };
> +       dma-channels@5 {
> +           reg = <5>;
> +           intel,desc_num = <1>;
> +       };
> +       dma-channels@6 {
> +           reg = <6>;
> +           intel,desc_num = <1>;
> +       };
> +       dma-channels@7 {
> +           reg = <7>;
> +           intel,desc_num = <1>;
> +       };
> +       dma-channels@8 {
> +           reg = <8>;
> +       };
> +       dma-channels@9 {
> +           reg = <9>;
> +       };
> +       dma-channels@10 {
> +           reg = <10>;
> +       };
> +       dma-channels@11 {
> +           reg = <11>;
> +       };
> +       dma-channels@12 {
> +           reg = <12>;
> +       };
> +       dma-channels@13 {
> +           reg = <13>;
> +       };
> +       dma-channels@14 {
> +           reg = <14>;
> +       };
> +       dma-channels@15 {
> +           reg = <15>;
> +       };
> +     };
> +   };
> + - |
> +   dma3: dma@ec800000 {
> +     compatible = "intel,lgm-dma3";
> +     reg = <0xec800000 0x1000>;
> +     clocks = <&cgu0 71>;
> +     resets = <&rcu0 0x10 9>;
> +     #dma-cells = <1>;
> +     intel,dma-burst = <32>;
> +     intel,dma-polling-cnt = <16>;
> +     intel,dma-desc-in-sram;
> +     intel,dma-orrc = <16>;
> +     intel,dma-byte-en;
> +     intel,dma-dburst-wr;
> +     dma-channels {
> +         #address-cells = <1>;
> +         #size-cells = <0>;
> +
> +         dma-channels@12 {
> +             reg = <12>;
> +             intel,pkt_sz = <4096>;
> +             intel,desc-rx-nonpost;
> +             intel,data-endian = <0>;
> +             intel,desc-endian = <0>;
> +             intel,data-endian-en;
> +             intel,desc-endian-en;
> +             intel,byte-offset = <0>;
> +             intel,hdr-mode = <128 0>;
> +             intel,non-arb-cnt = <0>;
> +             intel,arb-cnt = <0>;
> +             intel,hw-desc = <0x20000000 8>;
> +         };
> +         dma-channels@13 {
> +             reg = <13>;
> +             intel,pkt-drop;
> +             intel,pkt_sz = <4096>;
> +             intel,data-endian = <0>;
> +             intel,desc-endian = <0>;
> +             intel,data-endian-en;
> +             intel,desc-endian-en;
> +             intel,byte-offset = <0>;
> +             intel,hdr-mode = <128 0>;
> +             intel,non-arb-cnt = <0>;
> +             intel,arb-cnt = <0>;
> +         };
> +     };
> +   };
> --
> 2.11.0


^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v4 2/2] Add Intel LGM soc DMA support.
  2020-07-09  6:01 ` [PATCH v4 2/2] Add Intel LGM soc DMA support Amireddy Mallikarjuna reddy
@ 2020-07-09 11:09   ` Andy Shevchenko
  2020-07-13  8:41     ` Reddy, MallikarjunaX
  0 siblings, 1 reply; 10+ messages in thread
From: Andy Shevchenko @ 2020-07-09 11:09 UTC (permalink / raw)
  To: Amireddy Mallikarjuna reddy
  Cc: dmaengine, vkoul, devicetree, robh+dt, linux-kernel,
	chuanhua.lei, cheol.yong.kim, qi-ming.wu, malliamireddy009

On Thu, Jul 09, 2020 at 02:01:06PM +0800, Amireddy Mallikarjuna reddy wrote:
> Add DMA controller driver for Lightning Mountain(LGM) family of SoCs.
> 
> The main function of the DMA controller is the transfer of data from/to any
> DPlus compliant peripheral to/from the memory. A memory to memory copy
> capability can also be configured.
> 
> This ldma driver is used for configure the device and channnels for data
> and control paths.

> +#include "../virt-dma.h"

I didn't find any evidence this driver utilizes virt-dma API in full.
For example, there is a virt_dma_desc structure and descriptor management around it.
Why don't you use it?

-- 
With Best Regards,
Andy Shevchenko



^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v4 1/2] dt-bindings: dma: Add bindings for intel LGM SOC
  2020-07-09  7:54   ` Langer, Thomas
@ 2020-07-13  3:39     ` Reddy, MallikarjunaX
  2020-07-13 17:22       ` Rob Herring
  0 siblings, 1 reply; 10+ messages in thread
From: Reddy, MallikarjunaX @ 2020-07-13  3:39 UTC (permalink / raw)
  To: Langer, Thomas, dmaengine, vkoul, devicetree, robh+dt
  Cc: linux-kernel, Shevchenko, Andriy, chuanhua.lei, Kim, Cheol Yong,
	Wu, Qiming, malliamireddy009, mallikarjunax.reddy

Hi Thomas,

Thanks for the review. My comments inline.

On 7/9/2020 3:54 PM, Langer, Thomas wrote:
>
>> -----Original Message-----
>> From: devicetree-owner@vger.kernel.org <devicetree-
>> owner@vger.kernel.org> On Behalf Of Amireddy Mallikarjuna reddy
>> Sent: Donnerstag, 9. Juli 2020 08:01
>> To: dmaengine@vger.kernel.org; vkoul@kernel.org;
>> devicetree@vger.kernel.org; robh+dt@kernel.org
>> Cc: linux-kernel@vger.kernel.org; Shevchenko, Andriy
>> <andriy.shevchenko@intel.com>; chuanhua.lei@linux.intel.com; Kim, Cheol
>> Yong <cheol.yong.kim@intel.com>; Wu, Qiming <qi-ming.wu@intel.com>;
>> malliamireddy009@gmail.com; Amireddy Mallikarjuna reddy
>> <mallikarjunax.reddy@linux.intel.com>
>> Subject: [PATCH v4 1/2] dt-bindings: dma: Add bindings for intel LGM SOC
>>
>> Add DT bindings YAML schema for DMA controller driver
>> of Lightning Mountain(LGM) SoC.
>>
>> Signed-off-by: Amireddy Mallikarjuna reddy
>> <mallikarjunax.reddy@linux.intel.com>
>> ---
>> v1:
>> - Initial version.
>>
>> v2:
>> - Fix bot errors.
>>
>> v3:
>> - No change.
>>
>> v4:
>> - Address Thomas langer comments
> Please read my comments again and then respond about the topics you ignored.
> I added some hints below again.
>
> Thanks.
>
>> ---
>>   .../devicetree/bindings/dma/intel,ldma.yaml        | 416
>> +++++++++++++++++++++
>>   1 file changed, 416 insertions(+)
>>   create mode 100644
>> Documentation/devicetree/bindings/dma/intel,ldma.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/dma/intel,ldma.yaml
>> b/Documentation/devicetree/bindings/dma/intel,ldma.yaml
>> new file mode 100644
>> index 000000000000..7f666b9812e4
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/dma/intel,ldma.yaml
>> @@ -0,0 +1,416 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/dma/intel,ldma.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Lightning Mountain centralized low speed DMA and high speed DMA
>> controllers.
>> +
>> +maintainers:
>> +  - chuanhua.lei@intel.com
>> +  - mallikarjunax.reddy@intel.com
>> +
>> +properties:
>> + $nodename:
>> +   pattern: "^dma(@.*)?$"
> Please explain the difference to the common dma binding.
No difference. we can use "^dma-controller(@.*)?$" as in the common binding.
Its My bad. I missed the changes to include in this patch. Surely update 
in the upcoming patch.
>
>> +
>> + "#dma-cells":
>> +   const: 1
>> +
>> + compatible:
>> +  anyOf:
>> +   - const: intel,lgm-cdma
>> +   - const: intel,lgm-dma2tx
>> +   - const: intel,lgm-dma1rx
>> +   - const: intel,lgm-dma1tx
>> +   - const: intel,lgm-dma0tx
>> +   - const: intel,lgm-dma3
>> +   - const: intel,lgm-toe-dma30
>> +   - const: intel,lgm-toe-dma31
> Please explain why you need so many different compatible strings.
This hw dma has 7 DMA instances.
Some for datapath, some for memcpy  and some for TOE.
Some for TX only, some for RX only, and some for TX/RX(memcpy and ToE).

dma TX/RX type we considered as driver specific data of each instance 
and used different compatible strings for each instance.
And also idea is in future if any driver specific data of any particular 
instance we can handle.

Here if dma name and type(tx or rx) will be accepted as devicetree 
attributes then we can move .name = "toe_dma31", & .type = DMA_TYPE_MCPY
to devicetree. So that the compatible strings can be limited to two. 
intel,lgm-cdma & intel,lgm-hdma .

please suggest us the better proposal.
>
>> +
>> + reg:
>> +  maxItems: 1
>> +
>> + clocks:
>> +  maxItems: 1
>> +
>> + resets:
>> +  maxItems: 1
>> +
>> + interrupts:
>> +  maxItems: 1
>> +
>> + intel,dma-poll-cnt:
>> +   $ref: /schemas/types.yaml#definitions/uint32
>> +   description:
>> +     DMA descriptor polling counter. It may need fine tune according
>> +     to the system application scenario.
>> +
>> + intel,dma-byte-en:
>> +   type: boolean
>> +   description:
>> +     DMA byte enable is only valid for DMA write(RX).
>> +     Byte enable(1) means DMA write will be based on the number of
>> dwords
>> +     instead of the whole burst.
>> +
>> + intel,dma-drb:
>> +    type: boolean
>> +    description:
>> +      DMA descriptor read back to make sure data and desc
>> synchronization.
>> +
>> + intel,dma-burst:
>> +    $ref: /schemas/types.yaml#definitions/uint32
>> +    description:
>> +       Specifiy the DMA burst size(in dwords), the valid value will be
>> 8, 16, 32.
>> +       Default is 16 for data path dma, 32 is for memcopy DMA.
>> +
>> + intel,dma-polling-cnt:
>> +    $ref: /schemas/types.yaml#definitions/uint32
>> +    description:
>> +       DMA descriptor polling counter. It may need fine tune according
>> to
>> +       the system application scenario.
>> +
>> + intel,dma-desc-in-sram:
>> +    type: boolean
>> +    description:
>> +       DMA descritpors in SRAM or not. Some old controllers descriptors
>> +       can be in DRAM or SRAM. The new ones are all in SRAM.
>> +
>> + intel,dma-orrc:
>> +    $ref: /schemas/types.yaml#definitions/uint32
>> +    description:
>> +       DMA outstanding read counter. The maximum value is 16, and it
>> may
>> +       need fine tune according to the system application scenarios.
>> +
>> + intel,dma-dburst-wr:
>> +    type: boolean
>> +    description:
>> +       Enable RX dynamic burst write. It only applies to RX DMA and
>> memcopy DMA.
>> +
>> +
>> + dma-ports:
>> +    type: object
>> +    description:
>> +       This sub-node must contain a sub-node for each DMA port.
>> +    properties:
>> +      '#address-cells':
>> +        const: 1
>> +      '#size-cells':
>> +        const: 0
>> +
>> +    patternProperties:
>> +      "^dma-ports@[0-9]+$":
>> +          type: object
>> +
>> +          properties:
>> +            reg:
>> +              items:
>> +                - enum: [0, 1, 2, 3, 4, 5]
>> +              description:
>> +                 Which port this node refers to.
>> +
>> +            intel,name:
>> +              $ref: /schemas/types.yaml#definitions/string-array
>> +              description:
>> +                 Port name of each DMA port.
>> +
>> +            intel,chans:
>> +              $ref: /schemas/types.yaml#/definitions/uint32-array
>> +              description:
>> +                 The channels included on this port. Format is channel
>> start
>> +                 number and how many channels on this port.
>> +
>> +            intel,burst:
>> +              $ref: /schemas/types.yaml#/definitions/uint32
>> +              description:
>> +                 Specify the DMA port burst size, the valid value will
>> be
>> +                 2, 4, 8. Default is 2 for data path dma.
>> +
>> +            intel,txwgt:
>> +              $ref: /schemas/types.yaml#/definitions/uint32
>> +              description:
>> +                 Specify the port transmit weight for QoS purpose. The
>> valid
>> +                 value is 1~7. Default value is 1.
>> +
>> +            intel,endian:
>> +              $ref: /schemas/types.yaml#/definitions/uint32
>> +              description:
>> +                 Specify the DMA port endiannes conversion due to SoC
>> endianness difference.
>> +
>> +          required:
>> +            - reg
>> +            - intel,name
>> +            - intel,chans
>> +
>> +
>> + dma-channels:
>> +    type: object
>> +    description:
>> +       This sub-node must contain a sub-node for each DMA channel.
>> +    properties:
>> +      '#address-cells':
>> +        const: 1
>> +      '#size-cells':
>> +        const: 0
>> +
>> +    patternProperties:
>> +      "^dma-channels@[0-9]+$":
>> +          type: object
>> +
>> +          properties:
>> +            reg:
>> +              items:
>> +                - enum: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13,
>> 14, 15]
>> +              description:
>> +                 Which channel this node refers to.
>> +
>> +            intel,desc_num:
>> +              $ref: /schemas/types.yaml#/definitions/uint32
>> +              description:
>> +                 Per channel maximum descriptor number. The max value
>> is 255.
>> +
>> +            intel,pkt_sz:
>> +              $ref: /schemas/types.yaml#/definitions/uint32
>> +              description:
>> +                 Channel buffer packet size. It must be power of 2.
>> +                 The maximum size is 4096.
>> +
>> +            intel,desc-rx-nonpost:
>> +              type: boolean
>> +              description:
>> +                 Write non-posted type for DMA RX last data beat of
>> every descriptor.
>> +
>> +            intel,data-endian:
>> +              $ref: /schemas/types.yaml#/definitions/uint32
>> +              description:
>> +                 Per channel data endianness configuration according to
>> SoC requirement.
>> +
>> +            intel,desc-endian:
>> +              $ref: /schemas/types.yaml#/definitions/uint32
>> +              description:
>> +                 Per channel descriptor endianness configuration
>> according to SoC requirement.
>> +
>> +            intel,data-endian-en:
>> +              type: boolean
>> +              description:
>> +                 Per channel data endianness enabled.
>> +
>> +            intel,desc-endian-en:
>> +              type: boolean
>> +              description:
>> +                 Per channel descriptor endianness enabled.
>> +
>> +            intel,byte-offset:
>> +              $ref: /schemas/types.yaml#/definitions/uint32
>> +              description:
>> +                 Per channel byte offset(0~128).
>> +
>> +            intel,hdr-mode:
>> +              $ref: /schemas/types.yaml#/definitions/uint32-array
>> +              description:
>> +                 The first parameter is header mode size, the second
>> +                 parameter is checksum enable or disable. If enabled,
>> +                 header mode size is ignored. If disabled, header mode
>> +                 size must be provided.
>> +
>> +            intel,non-arb-cnt:
>> +              $ref: /schemas/types.yaml#/definitions/uint32
>> +              description:
>> +                 Per channel non arbitration counter while polling
>> +
>> +            intel,arb-cnt:
>> +              $ref: /schemas/types.yaml#/definitions/uint32
>> +              description:
>> +                 Per channel arbitration counter while polling.
>> +                 arb_cnt must be greater than non_arb_cnt
>> +
>> +            intel,pkt-drop:
>> +              type: boolean
>> +              description:
>> +                 Channel packet drop enabled or disabled.
>> +
>> +            intel,hw-desc:
>> +              $ref: /schemas/types.yaml#/definitions/uint32-array
>> +              description:
>> +                 Per channel dma hardware descriptor configuration.
>> +                 The first parameter is descriptor physical address and
>> the
>> +                 second parameter hardware descriptor number.
>> +
>> +          required:
>> +            - reg
>> +
>> +required:
>> + - compatible
>> + - reg
>> + - '#dma-cells'
>> +
>> +examples:
>> + - |
>> +   dma0: dma@e0e00000 {
>> +     compatible = "intel,lgm-cdma";
>> +     reg = <0xe0e00000 0x1000>;
>> +     #dma-cells = <1>;
>> +     interrupt-parent = <&ioapic1>;
>> +     interrupts = <82 1>;
>> +     resets = <&rcu0 0x30 0>;
>> +     reset-names = "ctrl";
>> +     clocks = <&cgu0 80>;
>> +     intel,dma-poll-cnt = <4>;
>> +     intel,dma-byte-en;
>> +     intel,dma-drb;
>> +     dma-ports {
>> +       #address-cells = <1>;
>> +       #size-cells = <0>;
>> +
>> +       dma-ports@0 {
>> +           reg = <0>;
>> +           intel,name = "SPI0";
>> +           intel,chans = <0 2>;
>> +           intel,burst = <2>;
>> +           intel,txwgt = <1>;
>> +       };
>> +       dma-ports@1 {
>> +           reg = <1>;
>> +           intel,name = "SPI1";
>> +           intel,chans = <2 2>;
>> +           intel,burst = <2>;
>> +           intel,txwgt = <1>;
>> +       };
>> +       dma-ports@2 {
>> +           reg = <2>;
>> +           intel,name = "SPI2";
>> +           intel,chans = <4 2>;
>> +           intel,burst = <2>;
>> +           intel,txwgt = <1>;
>> +       };
>> +       dma-ports@3 {
>> +           reg = <3>;
>> +           intel,name = "SPI3";
>> +           intel,chans = <6 2>;
>> +           intel,burst = <2>;
>> +           intel,endian = <0>;
>> +           intel,txwgt = <1>;
>> +       };
>> +       dma-ports@4 {
>> +           reg = <4>;
>> +           intel,name = "HSNAND";
>> +           intel,chans = <8 2>;
>> +           intel,burst = <8>;
>> +           intel,txwgt = <1>;
>> +       };
>> +       dma-ports@5 {
>> +           reg = <5>;
>> +           intel,name = "PCM";
>> +           intel,chans = <10 6>;
>> +           intel,burst = <8>;
>> +           intel,txwgt = <1>;
>> +       };
>> +     };
>> +     dma-channels {
>> +       #address-cells = <1>;
>> +       #size-cells = <0>;
>> +
>> +       dma-channels@0 {
>> +           reg = <0>;
>> +           intel,desc_num = <1>;
>> +       };
>> +       dma-channels@1 {
>> +           reg = <1>;
>> +           intel,desc_num = <1>;
>> +       };
>> +       dma-channels@2 {
>> +           reg = <2>;
>> +           intel,desc_num = <1>;
>> +       };
>> +       dma-channels@3 {
>> +           reg = <3>;
>> +           intel,desc_num = <1>;
>> +       };
>> +       dma-channels@4 {
>> +           reg = <4>;
>> +           intel,desc_num = <1>;
>> +       };
>> +       dma-channels@5 {
>> +           reg = <5>;
>> +           intel,desc_num = <1>;
>> +       };
>> +       dma-channels@6 {
>> +           reg = <6>;
>> +           intel,desc_num = <1>;
>> +       };
>> +       dma-channels@7 {
>> +           reg = <7>;
>> +           intel,desc_num = <1>;
>> +       };
>> +       dma-channels@8 {
>> +           reg = <8>;
>> +       };
>> +       dma-channels@9 {
>> +           reg = <9>;
>> +       };
>> +       dma-channels@10 {
>> +           reg = <10>;
>> +       };
>> +       dma-channels@11 {
>> +           reg = <11>;
>> +       };
>> +       dma-channels@12 {
>> +           reg = <12>;
>> +       };
>> +       dma-channels@13 {
>> +           reg = <13>;
>> +       };
>> +       dma-channels@14 {
>> +           reg = <14>;
>> +       };
>> +       dma-channels@15 {
>> +           reg = <15>;
>> +       };
>> +     };
>> +   };
>> + - |
>> +   dma3: dma@ec800000 {
>> +     compatible = "intel,lgm-dma3";
>> +     reg = <0xec800000 0x1000>;
>> +     clocks = <&cgu0 71>;
>> +     resets = <&rcu0 0x10 9>;
>> +     #dma-cells = <1>;
>> +     intel,dma-burst = <32>;
>> +     intel,dma-polling-cnt = <16>;
>> +     intel,dma-desc-in-sram;
>> +     intel,dma-orrc = <16>;
>> +     intel,dma-byte-en;
>> +     intel,dma-dburst-wr;
>> +     dma-channels {
>> +         #address-cells = <1>;
>> +         #size-cells = <0>;
>> +
>> +         dma-channels@12 {
>> +             reg = <12>;
>> +             intel,pkt_sz = <4096>;
>> +             intel,desc-rx-nonpost;
>> +             intel,data-endian = <0>;
>> +             intel,desc-endian = <0>;
>> +             intel,data-endian-en;
>> +             intel,desc-endian-en;
>> +             intel,byte-offset = <0>;
>> +             intel,hdr-mode = <128 0>;
>> +             intel,non-arb-cnt = <0>;
>> +             intel,arb-cnt = <0>;
>> +             intel,hw-desc = <0x20000000 8>;
>> +         };
>> +         dma-channels@13 {
>> +             reg = <13>;
>> +             intel,pkt-drop;
>> +             intel,pkt_sz = <4096>;
>> +             intel,data-endian = <0>;
>> +             intel,desc-endian = <0>;
>> +             intel,data-endian-en;
>> +             intel,desc-endian-en;
>> +             intel,byte-offset = <0>;
>> +             intel,hdr-mode = <128 0>;
>> +             intel,non-arb-cnt = <0>;
>> +             intel,arb-cnt = <0>;
>> +         };
>> +     };
>> +   };
>> --
>> 2.11.0

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v4 2/2] Add Intel LGM soc DMA support.
  2020-07-09 11:09   ` Andy Shevchenko
@ 2020-07-13  8:41     ` Reddy, MallikarjunaX
  2020-07-13  9:03       ` Andy Shevchenko
  0 siblings, 1 reply; 10+ messages in thread
From: Reddy, MallikarjunaX @ 2020-07-13  8:41 UTC (permalink / raw)
  To: Andy Shevchenko
  Cc: dmaengine, vkoul, devicetree, robh+dt, linux-kernel,
	chuanhua.lei, cheol.yong.kim, qi-ming.wu, malliamireddy009,
	mallikarjunax.reddy

Thanks for the review Andy. My comments inline.

On 7/9/2020 7:09 PM, Andy Shevchenko wrote:
> On Thu, Jul 09, 2020 at 02:01:06PM +0800, Amireddy Mallikarjuna reddy wrote:
>> Add DMA controller driver for Lightning Mountain(LGM) family of SoCs.
>>
>> The main function of the DMA controller is the transfer of data from/to any
>> DPlus compliant peripheral to/from the memory. A memory to memory copy
>> capability can also be configured.
>>
>> This ldma driver is used for configure the device and channnels for data
>> and control paths.
>> +#include "../virt-dma.h"
> I didn't find any evidence this driver utilizes virt-dma API in full.
> For example, there is a virt_dma_desc structure and descriptor management around it.
> Why don't you use it?
Lgm dma soc has its own hardware descriptor.
and each dma channel is associated with a peripheral, it is one to one 
mapping between channel and associated peripheral.
>

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v4 2/2] Add Intel LGM soc DMA support.
  2020-07-13  8:41     ` Reddy, MallikarjunaX
@ 2020-07-13  9:03       ` Andy Shevchenko
  0 siblings, 0 replies; 10+ messages in thread
From: Andy Shevchenko @ 2020-07-13  9:03 UTC (permalink / raw)
  To: Reddy, MallikarjunaX
  Cc: dmaengine, vkoul, devicetree, robh+dt, linux-kernel,
	chuanhua.lei, cheol.yong.kim, qi-ming.wu, malliamireddy009

On Mon, Jul 13, 2020 at 04:41:31PM +0800, Reddy, MallikarjunaX wrote:
> On 7/9/2020 7:09 PM, Andy Shevchenko wrote:
> > On Thu, Jul 09, 2020 at 02:01:06PM +0800, Amireddy Mallikarjuna reddy wrote:
> > > Add DMA controller driver for Lightning Mountain(LGM) family of SoCs.
> > > 
> > > The main function of the DMA controller is the transfer of data from/to any
> > > DPlus compliant peripheral to/from the memory. A memory to memory copy
> > > capability can also be configured.
> > > 
> > > This ldma driver is used for configure the device and channnels for data
> > > and control paths.
> > > +#include "../virt-dma.h"
> > I didn't find any evidence this driver utilizes virt-dma API in full.
> > For example, there is a virt_dma_desc structure and descriptor management around it.
> > Why don't you use it?
> Lgm dma soc has its own hardware descriptor.
> and each dma channel is associated with a peripheral, it is one to one
> mapping between channel and associated peripheral.

And this neither objects nor answers to my question.

Hint: above mentioned structure is an abstraction of hardware descriptors for
easier management in Linux kernel.

-- 
With Best Regards,
Andy Shevchenko



^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v4 1/2] dt-bindings: dma: Add bindings for intel LGM SOC
  2020-07-13  3:39     ` Reddy, MallikarjunaX
@ 2020-07-13 17:22       ` Rob Herring
  2020-07-21  2:53         ` Reddy, MallikarjunaX
  0 siblings, 1 reply; 10+ messages in thread
From: Rob Herring @ 2020-07-13 17:22 UTC (permalink / raw)
  To: Reddy, MallikarjunaX
  Cc: Langer, Thomas, dmaengine, vkoul, devicetree, linux-kernel,
	Shevchenko, Andriy, chuanhua.lei, Kim, Cheol Yong, Wu, Qiming,
	malliamireddy009, mallikarjunax.reddy

On Mon, Jul 13, 2020 at 11:39:49AM +0800, Reddy, MallikarjunaX wrote:
> Hi Thomas,
> 
> Thanks for the review. My comments inline.
> 
> On 7/9/2020 3:54 PM, Langer, Thomas wrote:
> > 
> > > -----Original Message-----
> > > From: devicetree-owner@vger.kernel.org <devicetree-
> > > owner@vger.kernel.org> On Behalf Of Amireddy Mallikarjuna reddy
> > > Sent: Donnerstag, 9. Juli 2020 08:01
> > > To: dmaengine@vger.kernel.org; vkoul@kernel.org;
> > > devicetree@vger.kernel.org; robh+dt@kernel.org
> > > Cc: linux-kernel@vger.kernel.org; Shevchenko, Andriy
> > > <andriy.shevchenko@intel.com>; chuanhua.lei@linux.intel.com; Kim, Cheol
> > > Yong <cheol.yong.kim@intel.com>; Wu, Qiming <qi-ming.wu@intel.com>;
> > > malliamireddy009@gmail.com; Amireddy Mallikarjuna reddy
> > > <mallikarjunax.reddy@linux.intel.com>
> > > Subject: [PATCH v4 1/2] dt-bindings: dma: Add bindings for intel LGM SOC
> > > 
> > > Add DT bindings YAML schema for DMA controller driver
> > > of Lightning Mountain(LGM) SoC.
> > > 
> > > Signed-off-by: Amireddy Mallikarjuna reddy
> > > <mallikarjunax.reddy@linux.intel.com>
> > > ---
> > > v1:
> > > - Initial version.
> > > 
> > > v2:
> > > - Fix bot errors.
> > > 
> > > v3:
> > > - No change.
> > > 
> > > v4:
> > > - Address Thomas langer comments
> > Please read my comments again and then respond about the topics you ignored.
> > I added some hints below again.
> > 
> > Thanks.
> > 
> > > ---
> > >   .../devicetree/bindings/dma/intel,ldma.yaml        | 416
> > > +++++++++++++++++++++
> > >   1 file changed, 416 insertions(+)
> > >   create mode 100644
> > > Documentation/devicetree/bindings/dma/intel,ldma.yaml
> > > 
> > > diff --git a/Documentation/devicetree/bindings/dma/intel,ldma.yaml
> > > b/Documentation/devicetree/bindings/dma/intel,ldma.yaml
> > > new file mode 100644
> > > index 000000000000..7f666b9812e4
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/dma/intel,ldma.yaml
> > > @@ -0,0 +1,416 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/dma/intel,ldma.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Lightning Mountain centralized low speed DMA and high speed DMA
> > > controllers.
> > > +
> > > +maintainers:
> > > +  - chuanhua.lei@intel.com
> > > +  - mallikarjunax.reddy@intel.com
> > > +
> > > +properties:
> > > + $nodename:
> > > +   pattern: "^dma(@.*)?$"
> > Please explain the difference to the common dma binding.
> No difference. we can use "^dma-controller(@.*)?$" as in the common binding.
> Its My bad. I missed the changes to include in this patch. Surely update in
> the upcoming patch.
> > 
> > > +
> > > + "#dma-cells":
> > > +   const: 1
> > > +
> > > + compatible:
> > > +  anyOf:
> > > +   - const: intel,lgm-cdma
> > > +   - const: intel,lgm-dma2tx
> > > +   - const: intel,lgm-dma1rx
> > > +   - const: intel,lgm-dma1tx
> > > +   - const: intel,lgm-dma0tx
> > > +   - const: intel,lgm-dma3
> > > +   - const: intel,lgm-toe-dma30
> > > +   - const: intel,lgm-toe-dma31
> > Please explain why you need so many different compatible strings.
> This hw dma has 7 DMA instances.
> Some for datapath, some for memcpy  and some for TOE.
> Some for TX only, some for RX only, and some for TX/RX(memcpy and ToE).
> 
> dma TX/RX type we considered as driver specific data of each instance and
> used different compatible strings for each instance.
> And also idea is in future if any driver specific data of any particular
> instance we can handle.
> 
> Here if dma name and type(tx or rx) will be accepted as devicetree
> attributes then we can move .name = "toe_dma31", & .type = DMA_TYPE_MCPY
> to devicetree. So that the compatible strings can be limited to two.
> intel,lgm-cdma & intel,lgm-hdma .

Different compatibles are okay if the instances are different and we 
don't have properties to describe the differences.

For some of what you have in this binding, I think it should be part of 
the consumer cells.

> 
> please suggest us the better proposal.
> > 
> > > +
> > > + reg:
> > > +  maxItems: 1
> > > +
> > > + clocks:
> > > +  maxItems: 1
> > > +
> > > + resets:
> > > +  maxItems: 1
> > > +
> > > + interrupts:
> > > +  maxItems: 1
> > > +
> > > + intel,dma-poll-cnt:
> > > +   $ref: /schemas/types.yaml#definitions/uint32
> > > +   description:
> > > +     DMA descriptor polling counter. It may need fine tune according
> > > +     to the system application scenario.
> > > +
> > > + intel,dma-byte-en:
> > > +   type: boolean
> > > +   description:
> > > +     DMA byte enable is only valid for DMA write(RX).
> > > +     Byte enable(1) means DMA write will be based on the number of
> > > dwords
> > > +     instead of the whole burst.
> > > +
> > > + intel,dma-drb:
> > > +    type: boolean
> > > +    description:
> > > +      DMA descriptor read back to make sure data and desc
> > > synchronization.
> > > +
> > > + intel,dma-burst:
> > > +    $ref: /schemas/types.yaml#definitions/uint32
> > > +    description:
> > > +       Specifiy the DMA burst size(in dwords), the valid value will be
> > > 8, 16, 32.
> > > +       Default is 16 for data path dma, 32 is for memcopy DMA.
> > > +
> > > + intel,dma-polling-cnt:

What's the difference with intel,dma-poll-cnt?

> > > +    $ref: /schemas/types.yaml#definitions/uint32
> > > +    description:
> > > +       DMA descriptor polling counter. It may need fine tune according
> > > to
> > > +       the system application scenario.
> > > +
> > > + intel,dma-desc-in-sram:
> > > +    type: boolean
> > > +    description:
> > > +       DMA descritpors in SRAM or not. Some old controllers descriptors
> > > +       can be in DRAM or SRAM. The new ones are all in SRAM.
> > > +
> > > + intel,dma-orrc:
> > > +    $ref: /schemas/types.yaml#definitions/uint32
> > > +    description:
> > > +       DMA outstanding read counter. The maximum value is 16, and it
> > > may
> > > +       need fine tune according to the system application scenarios.
> > > +
> > > + intel,dma-dburst-wr:
> > > +    type: boolean
> > > +    description:
> > > +       Enable RX dynamic burst write. It only applies to RX DMA and
> > > memcopy DMA.
> > > +
> > > +
> > > + dma-ports:
> > > +    type: object
> > > +    description:
> > > +       This sub-node must contain a sub-node for each DMA port.

What's a DMA port?

> > > +    properties:
> > > +      '#address-cells':
> > > +        const: 1
> > > +      '#size-cells':
> > > +        const: 0
> > > +
> > > +    patternProperties:
> > > +      "^dma-ports@[0-9]+$":
> > > +          type: object
> > > +
> > > +          properties:
> > > +            reg:
> > > +              items:
> > > +                - enum: [0, 1, 2, 3, 4, 5]
> > > +              description:
> > > +                 Which port this node refers to.
> > > +
> > > +            intel,name:
> > > +              $ref: /schemas/types.yaml#definitions/string-array
> > > +              description:
> > > +                 Port name of each DMA port.

Why do you need this?

> > > +
> > > +            intel,chans:
> > > +              $ref: /schemas/types.yaml#/definitions/uint32-array
> > > +              description:
> > > +                 The channels included on this port. Format is channel
> > > start
> > > +                 number and how many channels on this port.

We already have standard properties for defining channels.

> > > +
> > > +            intel,burst:
> > > +              $ref: /schemas/types.yaml#/definitions/uint32
> > > +              description:
> > > +                 Specify the DMA port burst size, the valid value will
> > > be
> > > +                 2, 4, 8. Default is 2 for data path dma.

This would normally be in the consumer cells.

> > > +
> > > +            intel,txwgt:
> > > +              $ref: /schemas/types.yaml#/definitions/uint32
> > > +              description:
> > > +                 Specify the port transmit weight for QoS purpose. The
> > > valid
> > > +                 value is 1~7. Default value is 1.
> > > +
> > > +            intel,endian:
> > > +              $ref: /schemas/types.yaml#/definitions/uint32
> > > +              description:
> > > +                 Specify the DMA port endiannes conversion due to SoC
> > > endianness difference.
> > > +
> > > +          required:
> > > +            - reg
> > > +            - intel,name
> > > +            - intel,chans
> > > +
> > > +
> > > + dma-channels:
> > > +    type: object
> > > +    description:
> > > +       This sub-node must contain a sub-node for each DMA channel.
> > > +    properties:
> > > +      '#address-cells':
> > > +        const: 1
> > > +      '#size-cells':
> > > +        const: 0
> > > +
> > > +    patternProperties:
> > > +      "^dma-channels@[0-9]+$":
> > > +          type: object
> > > +
> > > +          properties:
> > > +            reg:
> > > +              items:
> > > +                - enum: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13,
> > > 14, 15]
> > > +              description:
> > > +                 Which channel this node refers to.
> > > +
> > > +            intel,desc_num:
> > > +              $ref: /schemas/types.yaml#/definitions/uint32
> > > +              description:
> > > +                 Per channel maximum descriptor number. The max value
> > > is 255.
> > > +
> > > +            intel,pkt_sz:
> > > +              $ref: /schemas/types.yaml#/definitions/uint32
> > > +              description:
> > > +                 Channel buffer packet size. It must be power of 2.
> > > +                 The maximum size is 4096.
> > > +
> > > +            intel,desc-rx-nonpost:
> > > +              type: boolean
> > > +              description:
> > > +                 Write non-posted type for DMA RX last data beat of
> > > every descriptor.
> > > +
> > > +            intel,data-endian:
> > > +              $ref: /schemas/types.yaml#/definitions/uint32
> > > +              description:
> > > +                 Per channel data endianness configuration according to
> > > SoC requirement.
> > > +
> > > +            intel,desc-endian:
> > > +              $ref: /schemas/types.yaml#/definitions/uint32
> > > +              description:
> > > +                 Per channel descriptor endianness configuration
> > > according to SoC requirement.
> > > +
> > > +            intel,data-endian-en:
> > > +              type: boolean
> > > +              description:
> > > +                 Per channel data endianness enabled.
> > > +
> > > +            intel,desc-endian-en:
> > > +              type: boolean
> > > +              description:
> > > +                 Per channel descriptor endianness enabled.
> > > +
> > > +            intel,byte-offset:
> > > +              $ref: /schemas/types.yaml#/definitions/uint32
> > > +              description:
> > > +                 Per channel byte offset(0~128).
> > > +
> > > +            intel,hdr-mode:
> > > +              $ref: /schemas/types.yaml#/definitions/uint32-array
> > > +              description:
> > > +                 The first parameter is header mode size, the second
> > > +                 parameter is checksum enable or disable. If enabled,
> > > +                 header mode size is ignored. If disabled, header mode
> > > +                 size must be provided.
> > > +
> > > +            intel,non-arb-cnt:
> > > +              $ref: /schemas/types.yaml#/definitions/uint32
> > > +              description:
> > > +                 Per channel non arbitration counter while polling
> > > +
> > > +            intel,arb-cnt:
> > > +              $ref: /schemas/types.yaml#/definitions/uint32
> > > +              description:
> > > +                 Per channel arbitration counter while polling.
> > > +                 arb_cnt must be greater than non_arb_cnt
> > > +
> > > +            intel,pkt-drop:
> > > +              type: boolean
> > > +              description:
> > > +                 Channel packet drop enabled or disabled.
> > > +
> > > +            intel,hw-desc:
> > > +              $ref: /schemas/types.yaml#/definitions/uint32-array
> > > +              description:
> > > +                 Per channel dma hardware descriptor configuration.
> > > +                 The first parameter is descriptor physical address and
> > > the
> > > +                 second parameter hardware descriptor number.

All/most of these seem like client/consumer settings.

> > > +
> > > +          required:
> > > +            - reg
> > > +
> > > +required:
> > > + - compatible
> > > + - reg
> > > + - '#dma-cells'
> > > +
> > > +examples:
> > > + - |
> > > +   dma0: dma@e0e00000 {
> > > +     compatible = "intel,lgm-cdma";
> > > +     reg = <0xe0e00000 0x1000>;
> > > +     #dma-cells = <1>;
> > > +     interrupt-parent = <&ioapic1>;
> > > +     interrupts = <82 1>;
> > > +     resets = <&rcu0 0x30 0>;
> > > +     reset-names = "ctrl";
> > > +     clocks = <&cgu0 80>;
> > > +     intel,dma-poll-cnt = <4>;
> > > +     intel,dma-byte-en;
> > > +     intel,dma-drb;
> > > +     dma-ports {
> > > +       #address-cells = <1>;
> > > +       #size-cells = <0>;
> > > +
> > > +       dma-ports@0 {
> > > +           reg = <0>;
> > > +           intel,name = "SPI0";
> > > +           intel,chans = <0 2>;
> > > +           intel,burst = <2>;
> > > +           intel,txwgt = <1>;

Yeah, based on the names, it definitely seems like these belong as cells 
in 'dmas' properties.

> > > +       };
> > > +       dma-ports@1 {
> > > +           reg = <1>;
> > > +           intel,name = "SPI1";
> > > +           intel,chans = <2 2>;
> > > +           intel,burst = <2>;
> > > +           intel,txwgt = <1>;
> > > +       };
> > > +       dma-ports@2 {
> > > +           reg = <2>;
> > > +           intel,name = "SPI2";
> > > +           intel,chans = <4 2>;
> > > +           intel,burst = <2>;
> > > +           intel,txwgt = <1>;
> > > +       };
> > > +       dma-ports@3 {
> > > +           reg = <3>;
> > > +           intel,name = "SPI3";
> > > +           intel,chans = <6 2>;
> > > +           intel,burst = <2>;
> > > +           intel,endian = <0>;
> > > +           intel,txwgt = <1>;
> > > +       };
> > > +       dma-ports@4 {
> > > +           reg = <4>;
> > > +           intel,name = "HSNAND";
> > > +           intel,chans = <8 2>;
> > > +           intel,burst = <8>;
> > > +           intel,txwgt = <1>;
> > > +       };
> > > +       dma-ports@5 {
> > > +           reg = <5>;
> > > +           intel,name = "PCM";
> > > +           intel,chans = <10 6>;
> > > +           intel,burst = <8>;
> > > +           intel,txwgt = <1>;
> > > +       };
> > > +     };
> > > +     dma-channels {
> > > +       #address-cells = <1>;
> > > +       #size-cells = <0>;
> > > +
> > > +       dma-channels@0 {
> > > +           reg = <0>;
> > > +           intel,desc_num = <1>;
> > > +       };
> > > +       dma-channels@1 {
> > > +           reg = <1>;
> > > +           intel,desc_num = <1>;
> > > +       };
> > > +       dma-channels@2 {
> > > +           reg = <2>;
> > > +           intel,desc_num = <1>;
> > > +       };
> > > +       dma-channels@3 {
> > > +           reg = <3>;
> > > +           intel,desc_num = <1>;
> > > +       };
> > > +       dma-channels@4 {
> > > +           reg = <4>;
> > > +           intel,desc_num = <1>;
> > > +       };
> > > +       dma-channels@5 {
> > > +           reg = <5>;
> > > +           intel,desc_num = <1>;
> > > +       };
> > > +       dma-channels@6 {
> > > +           reg = <6>;
> > > +           intel,desc_num = <1>;
> > > +       };
> > > +       dma-channels@7 {
> > > +           reg = <7>;
> > > +           intel,desc_num = <1>;
> > > +       };
> > > +       dma-channels@8 {
> > > +           reg = <8>;
> > > +       };
> > > +       dma-channels@9 {
> > > +           reg = <9>;
> > > +       };
> > > +       dma-channels@10 {
> > > +           reg = <10>;
> > > +       };
> > > +       dma-channels@11 {
> > > +           reg = <11>;
> > > +       };
> > > +       dma-channels@12 {
> > > +           reg = <12>;
> > > +       };
> > > +       dma-channels@13 {
> > > +           reg = <13>;
> > > +       };
> > > +       dma-channels@14 {
> > > +           reg = <14>;
> > > +       };
> > > +       dma-channels@15 {
> > > +           reg = <15>;
> > > +       };
> > > +     };
> > > +   };
> > > + - |
> > > +   dma3: dma@ec800000 {
> > > +     compatible = "intel,lgm-dma3";
> > > +     reg = <0xec800000 0x1000>;
> > > +     clocks = <&cgu0 71>;
> > > +     resets = <&rcu0 0x10 9>;
> > > +     #dma-cells = <1>;
> > > +     intel,dma-burst = <32>;
> > > +     intel,dma-polling-cnt = <16>;
> > > +     intel,dma-desc-in-sram;
> > > +     intel,dma-orrc = <16>;
> > > +     intel,dma-byte-en;
> > > +     intel,dma-dburst-wr;
> > > +     dma-channels {
> > > +         #address-cells = <1>;
> > > +         #size-cells = <0>;
> > > +
> > > +         dma-channels@12 {
> > > +             reg = <12>;
> > > +             intel,pkt_sz = <4096>;
> > > +             intel,desc-rx-nonpost;
> > > +             intel,data-endian = <0>;
> > > +             intel,desc-endian = <0>;
> > > +             intel,data-endian-en;
> > > +             intel,desc-endian-en;
> > > +             intel,byte-offset = <0>;
> > > +             intel,hdr-mode = <128 0>;
> > > +             intel,non-arb-cnt = <0>;
> > > +             intel,arb-cnt = <0>;
> > > +             intel,hw-desc = <0x20000000 8>;
> > > +         };
> > > +         dma-channels@13 {
> > > +             reg = <13>;
> > > +             intel,pkt-drop;
> > > +             intel,pkt_sz = <4096>;
> > > +             intel,data-endian = <0>;
> > > +             intel,desc-endian = <0>;
> > > +             intel,data-endian-en;
> > > +             intel,desc-endian-en;
> > > +             intel,byte-offset = <0>;
> > > +             intel,hdr-mode = <128 0>;
> > > +             intel,non-arb-cnt = <0>;
> > > +             intel,arb-cnt = <0>;
> > > +         };
> > > +     };
> > > +   };
> > > --
> > > 2.11.0

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v4 1/2] dt-bindings: dma: Add bindings for intel LGM SOC
  2020-07-13 17:22       ` Rob Herring
@ 2020-07-21  2:53         ` Reddy, MallikarjunaX
  0 siblings, 0 replies; 10+ messages in thread
From: Reddy, MallikarjunaX @ 2020-07-21  2:53 UTC (permalink / raw)
  To: Rob Herring
  Cc: Langer, Thomas, dmaengine, vkoul, devicetree, linux-kernel,
	Shevchenko, Andriy, chuanhua.lei, Kim, Cheol Yong, Wu, Qiming,
	malliamireddy009, mallikarjunax.reddy

Thanks Rob for the review. Please see my comments inline.

On 7/14/2020 1:22 AM, Rob Herring wrote:
> On Mon, Jul 13, 2020 at 11:39:49AM +0800, Reddy, MallikarjunaX wrote:
>> Hi Thomas,
>>
>> Thanks for the review. My comments inline.
>>
>> On 7/9/2020 3:54 PM, Langer, Thomas wrote:
>>>> -----Original Message-----
>>>> From: devicetree-owner@vger.kernel.org <devicetree-
>>>> owner@vger.kernel.org> On Behalf Of Amireddy Mallikarjuna reddy
>>>> Sent: Donnerstag, 9. Juli 2020 08:01
>>>> To: dmaengine@vger.kernel.org; vkoul@kernel.org;
>>>> devicetree@vger.kernel.org; robh+dt@kernel.org
>>>> Cc: linux-kernel@vger.kernel.org; Shevchenko, Andriy
>>>> <andriy.shevchenko@intel.com>; chuanhua.lei@linux.intel.com; Kim, Cheol
>>>> Yong <cheol.yong.kim@intel.com>; Wu, Qiming <qi-ming.wu@intel.com>;
>>>> malliamireddy009@gmail.com; Amireddy Mallikarjuna reddy
>>>> <mallikarjunax.reddy@linux.intel.com>
>>>> Subject: [PATCH v4 1/2] dt-bindings: dma: Add bindings for intel LGM SOC
>>>>
>>>> Add DT bindings YAML schema for DMA controller driver
>>>> of Lightning Mountain(LGM) SoC.
>>>>
>>>> Signed-off-by: Amireddy Mallikarjuna reddy
>>>> <mallikarjunax.reddy@linux.intel.com>
>>>> ---
>>>> v1:
>>>> - Initial version.
>>>>
>>>> v2:
>>>> - Fix bot errors.
>>>>
>>>> v3:
>>>> - No change.
>>>>
>>>> v4:
>>>> - Address Thomas langer comments
>>> Please read my comments again and then respond about the topics you ignored.
>>> I added some hints below again.
>>>
>>> Thanks.
>>>
>>>> ---
>>>>    .../devicetree/bindings/dma/intel,ldma.yaml        | 416
>>>> +++++++++++++++++++++
>>>>    1 file changed, 416 insertions(+)
>>>>    create mode 100644
>>>> Documentation/devicetree/bindings/dma/intel,ldma.yaml
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/dma/intel,ldma.yaml
>>>> b/Documentation/devicetree/bindings/dma/intel,ldma.yaml
>>>> new file mode 100644
>>>> index 000000000000..7f666b9812e4
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/dma/intel,ldma.yaml
>>>> @@ -0,0 +1,416 @@
>>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>>>> +%YAML 1.2
>>>> +---
>>>> +$id: http://devicetree.org/schemas/dma/intel,ldma.yaml#
>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>>> +
>>>> +title: Lightning Mountain centralized low speed DMA and high speed DMA
>>>> controllers.
>>>> +
>>>> +maintainers:
>>>> +  - chuanhua.lei@intel.com
>>>> +  - mallikarjunax.reddy@intel.com
>>>> +
>>>> +properties:
>>>> + $nodename:
>>>> +   pattern: "^dma(@.*)?$"
>>> Please explain the difference to the common dma binding.
>> No difference. we can use "^dma-controller(@.*)?$" as in the common binding.
>> Its My bad. I missed the changes to include in this patch. Surely update in
>> the upcoming patch.
>>>> +
>>>> + "#dma-cells":
>>>> +   const: 1
>>>> +
>>>> + compatible:
>>>> +  anyOf:
>>>> +   - const: intel,lgm-cdma
>>>> +   - const: intel,lgm-dma2tx
>>>> +   - const: intel,lgm-dma1rx
>>>> +   - const: intel,lgm-dma1tx
>>>> +   - const: intel,lgm-dma0tx
>>>> +   - const: intel,lgm-dma3
>>>> +   - const: intel,lgm-toe-dma30
>>>> +   - const: intel,lgm-toe-dma31
>>> Please explain why you need so many different compatible strings.
>> This hw dma has 7 DMA instances.
>> Some for datapath, some for memcpy  and some for TOE.
>> Some for TX only, some for RX only, and some for TX/RX(memcpy and ToE).
>>
>> dma TX/RX type we considered as driver specific data of each instance and
>> used different compatible strings for each instance.
>> And also idea is in future if any driver specific data of any particular
>> instance we can handle.
>>
>> Here if dma name and type(tx or rx) will be accepted as devicetree
>> attributes then we can move .name = "toe_dma31", & .type = DMA_TYPE_MCPY
>> to devicetree. So that the compatible strings can be limited to two.
>> intel,lgm-cdma & intel,lgm-hdma .
> Different compatibles are okay if the instances are different and we
> don't have properties to describe the differences.
>
> For some of what you have in this binding, I think it should be part of
> the consumer cells.
>
>> please suggest us the better proposal.
>>>> +
>>>> + reg:
>>>> +  maxItems: 1
>>>> +
>>>> + clocks:
>>>> +  maxItems: 1
>>>> +
>>>> + resets:
>>>> +  maxItems: 1
>>>> +
>>>> + interrupts:
>>>> +  maxItems: 1
>>>> +
>>>> + intel,dma-poll-cnt:
>>>> +   $ref: /schemas/types.yaml#definitions/uint32
>>>> +   description:
>>>> +     DMA descriptor polling counter. It may need fine tune according
>>>> +     to the system application scenario.
>>>> +
>>>> + intel,dma-byte-en:
>>>> +   type: boolean
>>>> +   description:
>>>> +     DMA byte enable is only valid for DMA write(RX).
>>>> +     Byte enable(1) means DMA write will be based on the number of
>>>> dwords
>>>> +     instead of the whole burst.
>>>> +
>>>> + intel,dma-drb:
>>>> +    type: boolean
>>>> +    description:
>>>> +      DMA descriptor read back to make sure data and desc
>>>> synchronization.
>>>> +
>>>> + intel,dma-burst:
>>>> +    $ref: /schemas/types.yaml#definitions/uint32
>>>> +    description:
>>>> +       Specifiy the DMA burst size(in dwords), the valid value will be
>>>> 8, 16, 32.
>>>> +       Default is 16 for data path dma, 32 is for memcopy DMA.
>>>> +
>>>> + intel,dma-polling-cnt:
> What's the difference with intel,dma-poll-cnt?
This is redundant. I will remove it.
>
>>>> +    $ref: /schemas/types.yaml#definitions/uint32
>>>> +    description:
>>>> +       DMA descriptor polling counter. It may need fine tune according
>>>> to
>>>> +       the system application scenario.
>>>> +
>>>> + intel,dma-desc-in-sram:
>>>> +    type: boolean
>>>> +    description:
>>>> +       DMA descritpors in SRAM or not. Some old controllers descriptors
>>>> +       can be in DRAM or SRAM. The new ones are all in SRAM.
>>>> +
>>>> + intel,dma-orrc:
>>>> +    $ref: /schemas/types.yaml#definitions/uint32
>>>> +    description:
>>>> +       DMA outstanding read counter. The maximum value is 16, and it
>>>> may
>>>> +       need fine tune according to the system application scenarios.
>>>> +
>>>> + intel,dma-dburst-wr:
>>>> +    type: boolean
>>>> +    description:
>>>> +       Enable RX dynamic burst write. It only applies to RX DMA and
>>>> memcopy DMA.
>>>> +
>>>> +
>>>> + dma-ports:
>>>> +    type: object
>>>> +    description:
>>>> +       This sub-node must contain a sub-node for each DMA port.
> What's a DMA port?
DMA port represent the peripheral.
>
>>>> +    properties:
>>>> +      '#address-cells':
>>>> +        const: 1
>>>> +      '#size-cells':
>>>> +        const: 0
>>>> +
>>>> +    patternProperties:
>>>> +      "^dma-ports@[0-9]+$":
>>>> +          type: object
>>>> +
>>>> +          properties:
>>>> +            reg:
>>>> +              items:
>>>> +                - enum: [0, 1, 2, 3, 4, 5]
>>>> +              description:
>>>> +                 Which port this node refers to.
>>>> +
>>>> +            intel,name:
>>>> +              $ref: /schemas/types.yaml#definitions/string-array
>>>> +              description:
>>>> +                 Port name of each DMA port.
> Why do you need this?
we are using port name for
1. compare with name and and enable port configurations dynamically when 
it is enabled from devicetree.
2. for debug purpose.
>
>>>> +
>>>> +            intel,chans:
>>>> +              $ref: /schemas/types.yaml#/definitions/uint32-array
>>>> +              description:
>>>> +                 The channels included on this port. Format is channel
>>>> start
>>>> +                 number and how many channels on this port.
> We already have standard properties for defining channels.
I think you are reffering to 'dma-channels' property. This represents 
Number of DMA channels supported by the controller.

intel,chans attribute represents channels starting number and number of 
channels in this port.
intel,chans = <channel starting number, number of channels in this port>
>
>>>> +
>>>> +            intel,burst:
>>>> +              $ref: /schemas/types.yaml#/definitions/uint32
>>>> +              description:
>>>> +                 Specify the DMA port burst size, the valid value will
>>>> be
>>>> +                 2, 4, 8. Default is 2 for data path dma.
> This would normally be in the consumer cells.
>
>>>> +
>>>> +            intel,txwgt:
>>>> +              $ref: /schemas/types.yaml#/definitions/uint32
>>>> +              description:
>>>> +                 Specify the port transmit weight for QoS purpose. The
>>>> valid
>>>> +                 value is 1~7. Default value is 1.
>>>> +
>>>> +            intel,endian:
>>>> +              $ref: /schemas/types.yaml#/definitions/uint32
>>>> +              description:
>>>> +                 Specify the DMA port endiannes conversion due to SoC
>>>> endianness difference.
>>>> +
>>>> +          required:
>>>> +            - reg
>>>> +            - intel,name
>>>> +            - intel,chans
>>>> +
>>>> +
>>>> + dma-channels:
>>>> +    type: object
>>>> +    description:
>>>> +       This sub-node must contain a sub-node for each DMA channel.
>>>> +    properties:
>>>> +      '#address-cells':
>>>> +        const: 1
>>>> +      '#size-cells':
>>>> +        const: 0
>>>> +
>>>> +    patternProperties:
>>>> +      "^dma-channels@[0-9]+$":
>>>> +          type: object
>>>> +
>>>> +          properties:
>>>> +            reg:
>>>> +              items:
>>>> +                - enum: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13,
>>>> 14, 15]
>>>> +              description:
>>>> +                 Which channel this node refers to.
>>>> +
>>>> +            intel,desc_num:
>>>> +              $ref: /schemas/types.yaml#/definitions/uint32
>>>> +              description:
>>>> +                 Per channel maximum descriptor number. The max value
>>>> is 255.
>>>> +
>>>> +            intel,pkt_sz:
>>>> +              $ref: /schemas/types.yaml#/definitions/uint32
>>>> +              description:
>>>> +                 Channel buffer packet size. It must be power of 2.
>>>> +                 The maximum size is 4096.
>>>> +
>>>> +            intel,desc-rx-nonpost:
>>>> +              type: boolean
>>>> +              description:
>>>> +                 Write non-posted type for DMA RX last data beat of
>>>> every descriptor.
>>>> +
>>>> +            intel,data-endian:
>>>> +              $ref: /schemas/types.yaml#/definitions/uint32
>>>> +              description:
>>>> +                 Per channel data endianness configuration according to
>>>> SoC requirement.
>>>> +
>>>> +            intel,desc-endian:
>>>> +              $ref: /schemas/types.yaml#/definitions/uint32
>>>> +              description:
>>>> +                 Per channel descriptor endianness configuration
>>>> according to SoC requirement.
>>>> +
>>>> +            intel,data-endian-en:
>>>> +              type: boolean
>>>> +              description:
>>>> +                 Per channel data endianness enabled.
>>>> +
>>>> +            intel,desc-endian-en:
>>>> +              type: boolean
>>>> +              description:
>>>> +                 Per channel descriptor endianness enabled.
>>>> +
>>>> +            intel,byte-offset:
>>>> +              $ref: /schemas/types.yaml#/definitions/uint32
>>>> +              description:
>>>> +                 Per channel byte offset(0~128).
>>>> +
>>>> +            intel,hdr-mode:
>>>> +              $ref: /schemas/types.yaml#/definitions/uint32-array
>>>> +              description:
>>>> +                 The first parameter is header mode size, the second
>>>> +                 parameter is checksum enable or disable. If enabled,
>>>> +                 header mode size is ignored. If disabled, header mode
>>>> +                 size must be provided.
>>>> +
>>>> +            intel,non-arb-cnt:
>>>> +              $ref: /schemas/types.yaml#/definitions/uint32
>>>> +              description:
>>>> +                 Per channel non arbitration counter while polling
>>>> +
>>>> +            intel,arb-cnt:
>>>> +              $ref: /schemas/types.yaml#/definitions/uint32
>>>> +              description:
>>>> +                 Per channel arbitration counter while polling.
>>>> +                 arb_cnt must be greater than non_arb_cnt
>>>> +
>>>> +            intel,pkt-drop:
>>>> +              type: boolean
>>>> +              description:
>>>> +                 Channel packet drop enabled or disabled.
>>>> +
>>>> +            intel,hw-desc:
>>>> +              $ref: /schemas/types.yaml#/definitions/uint32-array
>>>> +              description:
>>>> +                 Per channel dma hardware descriptor configuration.
>>>> +                 The first parameter is descriptor physical address and
>>>> the
>>>> +                 second parameter hardware descriptor number.
> All/most of these seem like client/consumer settings.
>
>>>> +
>>>> +          required:
>>>> +            - reg
>>>> +
>>>> +required:
>>>> + - compatible
>>>> + - reg
>>>> + - '#dma-cells'
>>>> +
>>>> +examples:
>>>> + - |
>>>> +   dma0: dma@e0e00000 {
>>>> +     compatible = "intel,lgm-cdma";
>>>> +     reg = <0xe0e00000 0x1000>;
>>>> +     #dma-cells = <1>;
>>>> +     interrupt-parent = <&ioapic1>;
>>>> +     interrupts = <82 1>;
>>>> +     resets = <&rcu0 0x30 0>;
>>>> +     reset-names = "ctrl";
>>>> +     clocks = <&cgu0 80>;
>>>> +     intel,dma-poll-cnt = <4>;
>>>> +     intel,dma-byte-en;
>>>> +     intel,dma-drb;
>>>> +     dma-ports {
>>>> +       #address-cells = <1>;
>>>> +       #size-cells = <0>;
>>>> +
>>>> +       dma-ports@0 {
>>>> +           reg = <0>;
>>>> +           intel,name = "SPI0";
>>>> +           intel,chans = <0 2>;
>>>> +           intel,burst = <2>;
>>>> +           intel,txwgt = <1>;
> Yeah, based on the names, it definitely seems like these belong as cells
> in 'dmas' properties.

ok.
If we move these attributes to dmas, we need to configure these 
dynamically from driver side when client request for channel.

Both port and channel mapping is needed for dma slave configuration and 
also the available channels reading from device-tree dynamically instead 
of reading from registers.
So port & channel id's and descriptor information will keep in the child 
nodes and other attributes like burst, txwgt will move to 'dmas'.

>>>> +       };
>>>> +       dma-ports@1 {
>>>> +           reg = <1>;
>>>> +           intel,name = "SPI1";
>>>> +           intel,chans = <2 2>;
>>>> +           intel,burst = <2>;
>>>> +           intel,txwgt = <1>;
>>>> +       };
>>>> +       dma-ports@2 {
>>>> +           reg = <2>;
>>>> +           intel,name = "SPI2";
>>>> +           intel,chans = <4 2>;
>>>> +           intel,burst = <2>;
>>>> +           intel,txwgt = <1>;
>>>> +       };
>>>> +       dma-ports@3 {
>>>> +           reg = <3>;
>>>> +           intel,name = "SPI3";
>>>> +           intel,chans = <6 2>;
>>>> +           intel,burst = <2>;
>>>> +           intel,endian = <0>;
>>>> +           intel,txwgt = <1>;
>>>> +       };
>>>> +       dma-ports@4 {
>>>> +           reg = <4>;
>>>> +           intel,name = "HSNAND";
>>>> +           intel,chans = <8 2>;
>>>> +           intel,burst = <8>;
>>>> +           intel,txwgt = <1>;
>>>> +       };
>>>> +       dma-ports@5 {
>>>> +           reg = <5>;
>>>> +           intel,name = "PCM";
>>>> +           intel,chans = <10 6>;
>>>> +           intel,burst = <8>;
>>>> +           intel,txwgt = <1>;
>>>> +       };
>>>> +     };
>>>> +     dma-channels {
>>>> +       #address-cells = <1>;
>>>> +       #size-cells = <0>;
>>>> +
>>>> +       dma-channels@0 {
>>>> +           reg = <0>;
>>>> +           intel,desc_num = <1>;
>>>> +       };
>>>> +       dma-channels@1 {
>>>> +           reg = <1>;
>>>> +           intel,desc_num = <1>;
>>>> +       };
>>>> +       dma-channels@2 {
>>>> +           reg = <2>;
>>>> +           intel,desc_num = <1>;
>>>> +       };
>>>> +       dma-channels@3 {
>>>> +           reg = <3>;
>>>> +           intel,desc_num = <1>;
>>>> +       };
>>>> +       dma-channels@4 {
>>>> +           reg = <4>;
>>>> +           intel,desc_num = <1>;
>>>> +       };
>>>> +       dma-channels@5 {
>>>> +           reg = <5>;
>>>> +           intel,desc_num = <1>;
>>>> +       };
>>>> +       dma-channels@6 {
>>>> +           reg = <6>;
>>>> +           intel,desc_num = <1>;
>>>> +       };
>>>> +       dma-channels@7 {
>>>> +           reg = <7>;
>>>> +           intel,desc_num = <1>;
>>>> +       };
>>>> +       dma-channels@8 {
>>>> +           reg = <8>;
>>>> +       };
>>>> +       dma-channels@9 {
>>>> +           reg = <9>;
>>>> +       };
>>>> +       dma-channels@10 {
>>>> +           reg = <10>;
>>>> +       };
>>>> +       dma-channels@11 {
>>>> +           reg = <11>;
>>>> +       };
>>>> +       dma-channels@12 {
>>>> +           reg = <12>;
>>>> +       };
>>>> +       dma-channels@13 {
>>>> +           reg = <13>;
>>>> +       };
>>>> +       dma-channels@14 {
>>>> +           reg = <14>;
>>>> +       };
>>>> +       dma-channels@15 {
>>>> +           reg = <15>;
>>>> +       };
>>>> +     };
>>>> +   };
>>>> + - |
>>>> +   dma3: dma@ec800000 {
>>>> +     compatible = "intel,lgm-dma3";
>>>> +     reg = <0xec800000 0x1000>;
>>>> +     clocks = <&cgu0 71>;
>>>> +     resets = <&rcu0 0x10 9>;
>>>> +     #dma-cells = <1>;
>>>> +     intel,dma-burst = <32>;
>>>> +     intel,dma-polling-cnt = <16>;
>>>> +     intel,dma-desc-in-sram;
>>>> +     intel,dma-orrc = <16>;
>>>> +     intel,dma-byte-en;
>>>> +     intel,dma-dburst-wr;
>>>> +     dma-channels {
>>>> +         #address-cells = <1>;
>>>> +         #size-cells = <0>;
>>>> +
>>>> +         dma-channels@12 {
>>>> +             reg = <12>;
>>>> +             intel,pkt_sz = <4096>;
>>>> +             intel,desc-rx-nonpost;
>>>> +             intel,data-endian = <0>;
>>>> +             intel,desc-endian = <0>;
>>>> +             intel,data-endian-en;
>>>> +             intel,desc-endian-en;
>>>> +             intel,byte-offset = <0>;
>>>> +             intel,hdr-mode = <128 0>;
>>>> +             intel,non-arb-cnt = <0>;
>>>> +             intel,arb-cnt = <0>;
>>>> +             intel,hw-desc = <0x20000000 8>;
>>>> +         };
>>>> +         dma-channels@13 {
>>>> +             reg = <13>;
>>>> +             intel,pkt-drop;
>>>> +             intel,pkt_sz = <4096>;
>>>> +             intel,data-endian = <0>;
>>>> +             intel,desc-endian = <0>;
>>>> +             intel,data-endian-en;
>>>> +             intel,desc-endian-en;
>>>> +             intel,byte-offset = <0>;
>>>> +             intel,hdr-mode = <128 0>;
>>>> +             intel,non-arb-cnt = <0>;
>>>> +             intel,arb-cnt = <0>;
>>>> +         };
>>>> +     };
>>>> +   };
>>>> --
>>>> 2.11.0

^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, back to index

Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-09  6:01 [PATCH v4 0/2] Add Intel LGM soc DMA support Amireddy Mallikarjuna reddy
2020-07-09  6:01 ` [PATCH v4 1/2] dt-bindings: dma: Add bindings for intel LGM SOC Amireddy Mallikarjuna reddy
2020-07-09  7:54   ` Langer, Thomas
2020-07-13  3:39     ` Reddy, MallikarjunaX
2020-07-13 17:22       ` Rob Herring
2020-07-21  2:53         ` Reddy, MallikarjunaX
2020-07-09  6:01 ` [PATCH v4 2/2] Add Intel LGM soc DMA support Amireddy Mallikarjuna reddy
2020-07-09 11:09   ` Andy Shevchenko
2020-07-13  8:41     ` Reddy, MallikarjunaX
2020-07-13  9:03       ` Andy Shevchenko

dmaengine Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/dmaengine/0 dmaengine/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dmaengine dmaengine/ https://lore.kernel.org/dmaengine \
		dmaengine@vger.kernel.org
	public-inbox-index dmaengine

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.dmaengine


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git