dev.dpdk.org archive mirror
 help / color / mirror / Atom feed
From: Andrew Rybchenko <arybchenko@solarflare.com>
To: Neil Horman <nhorman@tuxdriver.com>,
	John McNamara <john.mcnamara@intel.com>,
	Marko Kovacevic <marko.kovacevic@intel.com>,
	Bernard Iremonger <bernard.iremonger@intel.com>,
	Ori Kam <orika@mellanox.com>,
	Bruce Richardson <bruce.richardson@intel.com>,
	"Pablo de Lara" <pablo.de.lara.guarch@intel.com>,
	Radu Nicolau <radu.nicolau@intel.com>,
	Akhil Goyal <akhil.goyal@nxp.com>,
	Tomasz Kantecki <tomasz.kantecki@intel.com>,
	Harry van Haaren <harry.van.haaren@intel.com>,
	Xiaoyun Li <xiaoyun.li@intel.com>,
	Thomas Monjalon <thomas@monjalon.net>,
	Ferruh Yigit <ferruh.yigit@intel.com>
Cc: <dev@dpdk.org>, Ivan Ilchenko <Ivan.Ilchenko@oktetlabs.ru>
Subject: [dpdk-dev] [PATCH v2 01/13] ethdev: change promiscuous mode controllers to return errors
Date: Mon, 9 Sep 2019 12:58:38 +0100	[thread overview]
Message-ID: <1568030331-16526-2-git-send-email-arybchenko@solarflare.com> (raw)
In-Reply-To: <1568030331-16526-1-git-send-email-arybchenko@solarflare.com>

From: Ivan Ilchenko <Ivan.Ilchenko@oktetlabs.ru>

Change rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable()
return value from void to int and return negative errno values
in case of error conditions.
Modify usage of these functions across the ethdev according
to new return type.

Signed-off-by: Ivan Ilchenko <Ivan.Ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
---
 doc/guides/rel_notes/deprecation.rst        |  1 -
 doc/guides/rel_notes/release_19_11.rst      |  4 ++
 doc/guides/sample_app_ug/flow_classify.rst  |  6 ++-
 doc/guides/sample_app_ug/flow_filtering.rst | 15 +++++-
 doc/guides/sample_app_ug/rxtx_callbacks.rst |  5 +-
 doc/guides/sample_app_ug/skeleton.rst       |  6 ++-
 lib/librte_ethdev/rte_ethdev.c              | 52 ++++++++++++++++-----
 lib/librte_ethdev/rte_ethdev.h              | 14 +++++-
 8 files changed, 80 insertions(+), 23 deletions(-)

diff --git a/doc/guides/rel_notes/deprecation.rst b/doc/guides/rel_notes/deprecation.rst
index cbb4c34efd..b2e0a1fc7c 100644
--- a/doc/guides/rel_notes/deprecation.rst
+++ b/doc/guides/rel_notes/deprecation.rst
@@ -88,7 +88,6 @@ Deprecation Notices
   negative errno values to indicate various error conditions (e.g.
   invalid port ID, unsupported operation, failed operation):
 
-  - ``rte_eth_promiscuous_enable`` and ``rte_eth_promiscuous_disable``
   - ``rte_eth_allmulticast_enable`` and ``rte_eth_allmulticast_disable``
   - ``rte_eth_link_get`` and ``rte_eth_link_get_nowait``
   - ``rte_eth_dev_stop``
diff --git a/doc/guides/rel_notes/release_19_11.rst b/doc/guides/rel_notes/release_19_11.rst
index 152f120197..5299157df7 100644
--- a/doc/guides/rel_notes/release_19_11.rst
+++ b/doc/guides/rel_notes/release_19_11.rst
@@ -97,6 +97,10 @@ API Changes
 * ethdev: changed ``rte_eth_dev_infos_get`` return value from ``void`` to
   ``int`` to provide a way to report various error conditions.
 
+* ethdev: changed ``rte_eth_promiscuous_enable`` and
+  ``rte_eth_promiscuous_disable`` return value from ``void`` to ``int`` to
+  provide a way to report various error conditions.
+
 
 ABI Changes
 -----------
diff --git a/doc/guides/sample_app_ug/flow_classify.rst b/doc/guides/sample_app_ug/flow_classify.rst
index 96a5c66d0f..7c2b6dcf83 100644
--- a/doc/guides/sample_app_ug/flow_classify.rst
+++ b/doc/guides/sample_app_ug/flow_classify.rst
@@ -315,7 +315,9 @@ Forwarding application is shown below:
                addr.addr_bytes[4], addr.addr_bytes[5]);
 
         /* Enable RX in promiscuous mode for the Ethernet device. */
-        rte_eth_promiscuous_enable(port);
+        retval = rte_eth_promiscuous_enable(port);
+        if (retval != 0)
+                return retval;
 
         return 0;
     }
@@ -343,7 +345,7 @@ Finally the RX port is set in promiscuous mode:
 
 .. code-block:: c
 
-    rte_eth_promiscuous_enable(port);
+    retval = rte_eth_promiscuous_enable(port);
 
 The Add Rules function
 ~~~~~~~~~~~~~~~~~~~~~~
diff --git a/doc/guides/sample_app_ug/flow_filtering.rst b/doc/guides/sample_app_ug/flow_filtering.rst
index 02fc675506..de3e4ab0b6 100644
--- a/doc/guides/sample_app_ug/flow_filtering.rst
+++ b/doc/guides/sample_app_ug/flow_filtering.rst
@@ -193,7 +193,13 @@ application is shown below:
                    }
           }
 
-           rte_eth_promiscuous_enable(port_id);
+           ret = rte_eth_promiscuous_enable(port_id);
+           if (ret != 0) {
+                   rte_exit(EXIT_FAILURE,
+                           ":: cannot enable promiscuous mode: err=%d, port=%u\n",
+                           ret, port_id);
+           }
+
            ret = rte_eth_dev_start(port_id);
            if (ret < 0) {
                    rte_exit(EXIT_FAILURE,
@@ -278,7 +284,12 @@ We are setting the RX port to promiscuous mode:
 
 .. code-block:: c
 
-   rte_eth_promiscuous_enable(port_id);
+   ret = rte_eth_promiscuous_enable(port_id);
+   if (ret != 0) {
+        rte_exit(EXIT_FAILURE,
+                 ":: cannot enable promiscuous mode: err=%d, port=%u\n",
+                 ret, port_id);
+   }
 
 The last step is to start the port.
 
diff --git a/doc/guides/sample_app_ug/rxtx_callbacks.rst b/doc/guides/sample_app_ug/rxtx_callbacks.rst
index 32c120992f..0a69ec71ab 100644
--- a/doc/guides/sample_app_ug/rxtx_callbacks.rst
+++ b/doc/guides/sample_app_ug/rxtx_callbacks.rst
@@ -117,8 +117,9 @@ comments:
             return retval;
 
         /* Enable RX in promiscuous mode for the Ethernet device. */
-        rte_eth_promiscuous_enable(port);
-
+        retval = rte_eth_promiscuous_enable(port);
+        if (retval != 0)
+            return retval;
 
         /* Add the callbacks for RX and TX.*/
         rte_eth_add_rx_callback(port, 0, add_timestamps, NULL);
diff --git a/doc/guides/sample_app_ug/skeleton.rst b/doc/guides/sample_app_ug/skeleton.rst
index 59ca511d33..1d0a2760d4 100644
--- a/doc/guides/sample_app_ug/skeleton.rst
+++ b/doc/guides/sample_app_ug/skeleton.rst
@@ -149,7 +149,9 @@ Forwarding application is shown below:
             return retval;
 
         /* Enable RX in promiscuous mode for the Ethernet device. */
-        rte_eth_promiscuous_enable(port);
+        retval = rte_eth_promiscuous_enable(port);
+        if (retval != 0)
+            return retval;
 
         return 0;
     }
@@ -177,7 +179,7 @@ Finally the RX port is set in promiscuous mode:
 
 .. code-block:: c
 
-        rte_eth_promiscuous_enable(port);
+        retval = rte_eth_promiscuous_enable(port);
 
 
 The Lcores Main
diff --git a/lib/librte_ethdev/rte_ethdev.c b/lib/librte_ethdev/rte_ethdev.c
index 30b0c7803f..b97dd8aa85 100644
--- a/lib/librte_ethdev/rte_ethdev.c
+++ b/lib/librte_ethdev/rte_ethdev.c
@@ -1381,24 +1381,41 @@ rte_eth_dev_mac_restore(struct rte_eth_dev *dev,
 	}
 }
 
-static void
+static int
 rte_eth_dev_config_restore(struct rte_eth_dev *dev,
 			   struct rte_eth_dev_info *dev_info, uint16_t port_id)
 {
+	int ret;
+
 	if (!(*dev_info->dev_flags & RTE_ETH_DEV_NOLIVE_MAC_ADDR))
 		rte_eth_dev_mac_restore(dev, dev_info);
 
 	/* replay promiscuous configuration */
-	if (rte_eth_promiscuous_get(port_id) == 1)
-		rte_eth_promiscuous_enable(port_id);
-	else if (rte_eth_promiscuous_get(port_id) == 0)
-		rte_eth_promiscuous_disable(port_id);
+	if (rte_eth_promiscuous_get(port_id) == 1) {
+		ret = rte_eth_promiscuous_enable(port_id);
+		if (ret != 0 && ret != -ENOTSUP) {
+			RTE_ETHDEV_LOG(ERR,
+				"Failed to enable promiscuous mode for device (port %u): %s\n",
+				port_id, rte_strerror(-ret));
+			return ret;
+		}
+	} else if (rte_eth_promiscuous_get(port_id) == 0) {
+		ret = rte_eth_promiscuous_disable(port_id);
+		if (ret != 0 && ret != -ENOTSUP) {
+			RTE_ETHDEV_LOG(ERR,
+				"Failed to disable promiscuous mode for device (port %u): %s\n",
+				port_id, rte_strerror(-ret));
+			return ret;
+		}
+	}
 
 	/* replay all multicast configuration */
 	if (rte_eth_allmulticast_get(port_id) == 1)
 		rte_eth_allmulticast_enable(port_id);
 	else if (rte_eth_allmulticast_get(port_id) == 0)
 		rte_eth_allmulticast_disable(port_id);
+
+	return 0;
 }
 
 int
@@ -1436,7 +1453,14 @@ rte_eth_dev_start(uint16_t port_id)
 	else
 		return eth_err(port_id, diag);
 
-	rte_eth_dev_config_restore(dev, &dev_info, port_id);
+	ret = rte_eth_dev_config_restore(dev, &dev_info, port_id);
+	if (ret != 0) {
+		RTE_ETHDEV_LOG(ERR,
+			"Error during restoring configuration for device (port %u): %s\n",
+			port_id, rte_strerror(-ret));
+		rte_eth_dev_stop(port_id);
+		return ret;
+	}
 
 	if (dev->data->dev_conf.intr_conf.lsc == 0) {
 		RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->link_update, -ENOTSUP);
@@ -1864,30 +1888,34 @@ rte_eth_tx_done_cleanup(uint16_t port_id, uint16_t queue_id, uint32_t free_cnt)
 	return eth_err(port_id, ret);
 }
 
-void
+int
 rte_eth_promiscuous_enable(uint16_t port_id)
 {
 	struct rte_eth_dev *dev;
 
-	RTE_ETH_VALID_PORTID_OR_RET(port_id);
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
 	dev = &rte_eth_devices[port_id];
 
-	RTE_FUNC_PTR_OR_RET(*dev->dev_ops->promiscuous_enable);
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->promiscuous_enable, -ENOTSUP);
 	(*dev->dev_ops->promiscuous_enable)(dev);
 	dev->data->promiscuous = 1;
+
+	return 0;
 }
 
-void
+int
 rte_eth_promiscuous_disable(uint16_t port_id)
 {
 	struct rte_eth_dev *dev;
 
-	RTE_ETH_VALID_PORTID_OR_RET(port_id);
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
 	dev = &rte_eth_devices[port_id];
 
-	RTE_FUNC_PTR_OR_RET(*dev->dev_ops->promiscuous_disable);
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->promiscuous_disable, -ENOTSUP);
 	dev->data->promiscuous = 0;
 	(*dev->dev_ops->promiscuous_disable)(dev);
+
+	return 0;
 }
 
 int
diff --git a/lib/librte_ethdev/rte_ethdev.h b/lib/librte_ethdev/rte_ethdev.h
index 475dbdae17..f07a829b29 100644
--- a/lib/librte_ethdev/rte_ethdev.h
+++ b/lib/librte_ethdev/rte_ethdev.h
@@ -2022,16 +2022,26 @@ int rte_eth_dev_reset(uint16_t port_id);
  *
  * @param port_id
  *   The port identifier of the Ethernet device.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if support for promiscuous_enable() does not exist
+ *     for the device.
+ *   - (-ENODEV) if *port_id* invalid.
  */
-void rte_eth_promiscuous_enable(uint16_t port_id);
+int rte_eth_promiscuous_enable(uint16_t port_id);
 
 /**
  * Disable receipt in promiscuous mode for an Ethernet device.
  *
  * @param port_id
  *   The port identifier of the Ethernet device.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if support for promiscuous_disable() does not exist
+ *     for the device.
+ *   - (-ENODEV) if *port_id* invalid.
  */
-void rte_eth_promiscuous_disable(uint16_t port_id);
+int rte_eth_promiscuous_disable(uint16_t port_id);
 
 /**
  * Return the value of promiscuous mode for an Ethernet device.
-- 
2.17.1


  reply	other threads:[~2019-09-09 11:59 UTC|newest]

Thread overview: 77+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-05 16:10 [dpdk-dev] [PATCH 00/13] ethdev: change promiscuous mode functions to return status Andrew Rybchenko
2019-09-05 16:10 ` [dpdk-dev] [PATCH 01/13] ethdev: change promiscuous mode controllers to return errors Andrew Rybchenko
2019-09-05 16:10 ` [dpdk-dev] [PATCH 02/13] net/failsafe: check code of promiscuous mode switch Andrew Rybchenko
2019-09-05 16:25   ` Gaëtan Rivet
2019-09-05 16:32     ` Andrew Rybchenko
2019-09-05 16:36   ` Stephen Hemminger
2019-09-05 16:38     ` Andrew Rybchenko
2019-09-06  9:24       ` Gaëtan Rivet
2019-09-06 10:08         ` Andrew Rybchenko
2019-09-05 16:40   ` Stephen Hemminger
2019-09-05 16:49     ` Andrew Rybchenko
2019-09-05 17:13       ` Stephen Hemminger
2019-09-05 16:10 ` [dpdk-dev] [PATCH 03/13] net/bonding: " Andrew Rybchenko
2019-09-05 16:10 ` [dpdk-dev] [PATCH 04/13] ethdev: change promiscuous callbacks to return status Andrew Rybchenko
2019-09-05 16:10 ` [dpdk-dev] [PATCH 05/13] ethdev: do nothing if promiscuous mode is applied again Andrew Rybchenko
2019-09-05 16:10 ` [dpdk-dev] [PATCH 06/13] app/pipeline: check code of promiscuous mode switch Andrew Rybchenko
2019-09-05 16:10 ` [dpdk-dev] [PATCH 07/13] app/testpmd: " Andrew Rybchenko
2019-09-05 16:10 ` [dpdk-dev] [PATCH 08/13] app/eventdev: " Andrew Rybchenko
2019-09-05 16:10 ` [dpdk-dev] [PATCH 09/13] app/pdump: " Andrew Rybchenko
2019-09-05 16:10 ` [dpdk-dev] [PATCH 10/13] app/test: " Andrew Rybchenko
2019-09-05 16:10 ` [dpdk-dev] [PATCH 11/13] kni: " Andrew Rybchenko
2019-09-05 16:10 ` [dpdk-dev] [PATCH 12/13] test/bonding: " Andrew Rybchenko
2019-09-05 16:10 ` [dpdk-dev] [PATCH 13/13] examples: take promiscuous mode switch result into account Andrew Rybchenko
2019-09-09 11:58 ` [dpdk-dev] [PATCH v2 00/13] ethdev: change promiscuous mode functions to return status Andrew Rybchenko
2019-09-09 11:58   ` Andrew Rybchenko [this message]
2019-09-13 15:35     ` [dpdk-dev] [PATCH v2 01/13] ethdev: change promiscuous mode controllers to return errors Ferruh Yigit
2019-09-09 11:58   ` [dpdk-dev] [PATCH v2 02/13] net/failsafe: check code of promiscuous mode switch Andrew Rybchenko
2019-09-09 12:48     ` Gaëtan Rivet
2019-09-09 11:58   ` [dpdk-dev] [PATCH v2 03/13] net/bonding: " Andrew Rybchenko
2019-09-09 11:58   ` [dpdk-dev] [PATCH v2 04/13] ethdev: change promiscuous callbacks to return status Andrew Rybchenko
2019-09-10  7:53     ` Matan Azrad
2019-09-13 21:05       ` Andrew Rybchenko
2019-09-11  8:46     ` Hyong Youb Kim (hyonkim)
2019-09-13 21:06       ` Andrew Rybchenko
2019-09-16  6:48         ` Hyong Youb Kim (hyonkim)
2019-09-13 15:34     ` Ferruh Yigit
2019-09-13 15:54       ` Andrew Rybchenko
2019-09-13 16:33         ` Ferruh Yigit
2019-09-13 15:39     ` Ferruh Yigit
2019-09-13 16:05       ` Andrew Rybchenko
2019-09-13 16:34         ` Ferruh Yigit
2019-09-13 19:57           ` Andrew Rybchenko
2019-09-16 13:22             ` Ferruh Yigit
2019-09-16 15:45               ` Andrew Rybchenko
2019-09-16 15:58                 ` Ferruh Yigit
2019-09-13 16:43     ` Ferruh Yigit
2019-09-13 20:33       ` Andrew Rybchenko
2019-09-13 16:56     ` Ferruh Yigit
2019-09-13 20:38       ` Andrew Rybchenko
2019-09-09 11:58   ` [dpdk-dev] [PATCH v2 05/13] ethdev: do nothing if promiscuous mode is applied again Andrew Rybchenko
2019-09-09 11:58   ` [dpdk-dev] [PATCH v2 06/13] app/pipeline: check code of promiscuous mode switch Andrew Rybchenko
2019-09-09 11:58   ` [dpdk-dev] [PATCH v2 07/13] app/testpmd: " Andrew Rybchenko
2019-09-09 11:58   ` [dpdk-dev] [PATCH v2 08/13] app/eventdev: " Andrew Rybchenko
2019-09-09 11:58   ` [dpdk-dev] [PATCH v2 09/13] app/pdump: " Andrew Rybchenko
2019-09-09 11:58   ` [dpdk-dev] [PATCH v2 10/13] app/test: " Andrew Rybchenko
2019-09-09 11:58   ` [dpdk-dev] [PATCH v2 11/13] kni: " Andrew Rybchenko
2019-09-09 11:58   ` [dpdk-dev] [PATCH v2 12/13] test/bonding: " Andrew Rybchenko
2019-09-09 11:58   ` [dpdk-dev] [PATCH v2 13/13] examples: take promiscuous mode switch result into account Andrew Rybchenko
2019-09-13 16:40     ` Ferruh Yigit
2019-09-13 18:30       ` Andrew Rybchenko
2019-09-13 16:37   ` [dpdk-dev] [PATCH v2 00/13] ethdev: change promiscuous mode functions to return status Ferruh Yigit
2019-09-14 11:37 ` [dpdk-dev] [PATCH v3 " Andrew Rybchenko
2019-09-14 11:37   ` [dpdk-dev] [PATCH v3 01/13] ethdev: change promiscuous mode controllers to return errors Andrew Rybchenko
2019-09-14 11:37   ` [dpdk-dev] [PATCH v3 02/13] net/failsafe: check code of promiscuous mode switch Andrew Rybchenko
2019-09-14 11:37   ` [dpdk-dev] [PATCH v3 03/13] net/bonding: " Andrew Rybchenko
2019-09-14 11:37   ` [dpdk-dev] [PATCH v3 04/13] ethdev: change promiscuous callbacks to return status Andrew Rybchenko
2019-09-14 11:37   ` [dpdk-dev] [PATCH v3 05/13] ethdev: do nothing if promiscuous mode is applied again Andrew Rybchenko
2019-09-14 11:37   ` [dpdk-dev] [PATCH v3 06/13] app/pipeline: check code of promiscuous mode switch Andrew Rybchenko
2019-09-14 11:37   ` [dpdk-dev] [PATCH v3 07/13] app/testpmd: " Andrew Rybchenko
2019-09-16 13:18     ` Iremonger, Bernard
2019-09-14 11:37   ` [dpdk-dev] [PATCH v3 08/13] app/eventdev: " Andrew Rybchenko
2019-09-14 11:37   ` [dpdk-dev] [PATCH v3 09/13] app/pdump: " Andrew Rybchenko
2019-09-14 11:37   ` [dpdk-dev] [PATCH v3 10/13] app/test: " Andrew Rybchenko
2019-09-14 11:37   ` [dpdk-dev] [PATCH v3 11/13] kni: " Andrew Rybchenko
2019-09-14 11:37   ` [dpdk-dev] [PATCH v3 12/13] test/bonding: " Andrew Rybchenko
2019-09-14 11:37   ` [dpdk-dev] [PATCH v3 13/13] examples: take promiscuous mode switch result into account Andrew Rybchenko
2019-09-24  7:31   ` [dpdk-dev] [PATCH v3 00/13] ethdev: change promiscuous mode functions to return status Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1568030331-16526-2-git-send-email-arybchenko@solarflare.com \
    --to=arybchenko@solarflare.com \
    --cc=Ivan.Ilchenko@oktetlabs.ru \
    --cc=akhil.goyal@nxp.com \
    --cc=bernard.iremonger@intel.com \
    --cc=bruce.richardson@intel.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=harry.van.haaren@intel.com \
    --cc=john.mcnamara@intel.com \
    --cc=marko.kovacevic@intel.com \
    --cc=nhorman@tuxdriver.com \
    --cc=orika@mellanox.com \
    --cc=pablo.de.lara.guarch@intel.com \
    --cc=radu.nicolau@intel.com \
    --cc=thomas@monjalon.net \
    --cc=tomasz.kantecki@intel.com \
    --cc=xiaoyun.li@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).