From: Joyce Kong <joyce.kong@arm.com>
To: dev@dpdk.org
Cc: nd@arm.com, thomas@monjalon.net, jerinj@marvell.com,
stephen@networkplumber.org, mb@smartsharesystems.com,
david.marchand@redhat.com, honnappa.nagarahalli@arm.com,
gavin.hu@arm.com, ravi1.kumar@amd.com, rmody@marvell.com,
shshaikh@marvell.com, xuanziyang2@huawei.com,
cloud.wangxiaoyun@huawei.com, zhouguoyang@huawei.com
Subject: [dpdk-dev] [PATCH v3 4/6] net/bnx2x: use common rte bit operation APIs instead
Date: Mon, 18 Nov 2019 18:06:57 +0800 [thread overview]
Message-ID: <1574071619-10407-5-git-send-email-joyce.kong@arm.com> (raw)
In-Reply-To: <1574071619-10407-1-git-send-email-joyce.kong@arm.com>
In-Reply-To: <1571125801-45773-1-git-send-email-joyce.kong@arm.com>
Remove its own bit operation APIs and use the common one,
this can reduce the code duplication largely.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
---
drivers/net/bnx2x/bnx2x.c | 209 ++++++++++++++++-------------------
drivers/net/bnx2x/bnx2x.h | 4 -
drivers/net/bnx2x/ecore_sp.h | 9 +-
3 files changed, 98 insertions(+), 124 deletions(-)
diff --git a/drivers/net/bnx2x/bnx2x.c b/drivers/net/bnx2x/bnx2x.c
index ed31335ac..979eed988 100644
--- a/drivers/net/bnx2x/bnx2x.c
+++ b/drivers/net/bnx2x/bnx2x.c
@@ -26,6 +26,7 @@
#include <fcntl.h>
#include <zlib.h>
#include <rte_string_fns.h>
+#include <rte_bitops.h>
#define BNX2X_PMD_VER_PREFIX "BNX2X PMD"
#define BNX2X_PMD_VERSION_MAJOR 1
@@ -129,32 +130,6 @@ static void bnx2x_ack_sb(struct bnx2x_softc *sc, uint8_t igu_sb_id,
uint8_t storm, uint16_t index, uint8_t op,
uint8_t update);
-int bnx2x_test_bit(int nr, volatile unsigned long *addr)
-{
- int res;
-
- mb();
- res = ((*addr) & (1UL << nr)) != 0;
- mb();
- return res;
-}
-
-void bnx2x_set_bit(unsigned int nr, volatile unsigned long *addr)
-{
- __sync_fetch_and_or(addr, (1UL << nr));
-}
-
-void bnx2x_clear_bit(int nr, volatile unsigned long *addr)
-{
- __sync_fetch_and_and(addr, ~(1UL << nr));
-}
-
-int bnx2x_test_and_clear_bit(int nr, volatile unsigned long *addr)
-{
- unsigned long mask = (1UL << nr);
- return __sync_fetch_and_and(addr, ~mask) & mask;
-}
-
int bnx2x_cmpxchg(volatile int *addr, int old, int new)
{
return __sync_val_compare_and_swap(addr, old, new);
@@ -1427,11 +1402,11 @@ bnx2x_del_all_macs(struct bnx2x_softc *sc, struct ecore_vlan_mac_obj *mac_obj,
/* wait for completion of requested */
if (wait_for_comp) {
- bnx2x_set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
+ rte_set_bit32(RAMROD_COMP_WAIT, &ramrod_flags);
}
/* Set the mac type of addresses we want to clear */
- bnx2x_set_bit(mac_type, &vlan_mac_flags);
+ rte_set_bit32(mac_type, &vlan_mac_flags);
rc = mac_obj->delete_all(sc, mac_obj, &vlan_mac_flags, &ramrod_flags);
if (rc < 0)
@@ -1458,26 +1433,26 @@ bnx2x_fill_accept_flags(struct bnx2x_softc *sc, uint32_t rx_mode,
break;
case BNX2X_RX_MODE_NORMAL:
- bnx2x_set_bit(ECORE_ACCEPT_UNICAST, rx_accept_flags);
- bnx2x_set_bit(ECORE_ACCEPT_MULTICAST, rx_accept_flags);
- bnx2x_set_bit(ECORE_ACCEPT_BROADCAST, rx_accept_flags);
+ rte_set_bit32(ECORE_ACCEPT_UNICAST, rx_accept_flags);
+ rte_set_bit32(ECORE_ACCEPT_MULTICAST, rx_accept_flags);
+ rte_set_bit32(ECORE_ACCEPT_BROADCAST, rx_accept_flags);
/* internal switching mode */
- bnx2x_set_bit(ECORE_ACCEPT_UNICAST, tx_accept_flags);
- bnx2x_set_bit(ECORE_ACCEPT_MULTICAST, tx_accept_flags);
- bnx2x_set_bit(ECORE_ACCEPT_BROADCAST, tx_accept_flags);
+ rte_set_bit32(ECORE_ACCEPT_UNICAST, tx_accept_flags);
+ rte_set_bit32(ECORE_ACCEPT_MULTICAST, tx_accept_flags);
+ rte_set_bit32(ECORE_ACCEPT_BROADCAST, tx_accept_flags);
break;
case BNX2X_RX_MODE_ALLMULTI:
- bnx2x_set_bit(ECORE_ACCEPT_UNICAST, rx_accept_flags);
- bnx2x_set_bit(ECORE_ACCEPT_ALL_MULTICAST, rx_accept_flags);
- bnx2x_set_bit(ECORE_ACCEPT_BROADCAST, rx_accept_flags);
+ rte_set_bit32(ECORE_ACCEPT_UNICAST, rx_accept_flags);
+ rte_set_bit32(ECORE_ACCEPT_ALL_MULTICAST, rx_accept_flags);
+ rte_set_bit32(ECORE_ACCEPT_BROADCAST, rx_accept_flags);
/* internal switching mode */
- bnx2x_set_bit(ECORE_ACCEPT_UNICAST, tx_accept_flags);
- bnx2x_set_bit(ECORE_ACCEPT_ALL_MULTICAST, tx_accept_flags);
- bnx2x_set_bit(ECORE_ACCEPT_BROADCAST, tx_accept_flags);
+ rte_set_bit32(ECORE_ACCEPT_UNICAST, tx_accept_flags);
+ rte_set_bit32(ECORE_ACCEPT_ALL_MULTICAST, tx_accept_flags);
+ rte_set_bit32(ECORE_ACCEPT_BROADCAST, tx_accept_flags);
break;
@@ -1488,19 +1463,20 @@ bnx2x_fill_accept_flags(struct bnx2x_softc *sc, uint32_t rx_mode,
* should receive matched and unmatched (in resolution of port)
* unicast packets.
*/
- bnx2x_set_bit(ECORE_ACCEPT_UNMATCHED, rx_accept_flags);
- bnx2x_set_bit(ECORE_ACCEPT_UNICAST, rx_accept_flags);
- bnx2x_set_bit(ECORE_ACCEPT_ALL_MULTICAST, rx_accept_flags);
- bnx2x_set_bit(ECORE_ACCEPT_BROADCAST, rx_accept_flags);
+ rte_set_bit32(ECORE_ACCEPT_UNMATCHED, rx_accept_flags);
+ rte_set_bit32(ECORE_ACCEPT_UNICAST, rx_accept_flags);
+ rte_set_bit32(ECORE_ACCEPT_ALL_MULTICAST, rx_accept_flags);
+ rte_set_bit32(ECORE_ACCEPT_BROADCAST, rx_accept_flags);
/* internal switching mode */
- bnx2x_set_bit(ECORE_ACCEPT_ALL_MULTICAST, tx_accept_flags);
- bnx2x_set_bit(ECORE_ACCEPT_BROADCAST, tx_accept_flags);
+ rte_set_bit32(ECORE_ACCEPT_ALL_MULTICAST, tx_accept_flags);
+ rte_set_bit32(ECORE_ACCEPT_BROADCAST, tx_accept_flags);
if (IS_MF_SI(sc)) {
- bnx2x_set_bit(ECORE_ACCEPT_ALL_UNICAST, tx_accept_flags);
+ rte_set_bit32(ECORE_ACCEPT_ALL_UNICAST,
+ tx_accept_flags);
} else {
- bnx2x_set_bit(ECORE_ACCEPT_UNICAST, tx_accept_flags);
+ rte_set_bit32(ECORE_ACCEPT_UNICAST, tx_accept_flags);
}
break;
@@ -1512,8 +1488,8 @@ bnx2x_fill_accept_flags(struct bnx2x_softc *sc, uint32_t rx_mode,
/* Set ACCEPT_ANY_VLAN as we do not enable filtering by VLAN */
if (rx_mode != BNX2X_RX_MODE_NONE) {
- bnx2x_set_bit(ECORE_ACCEPT_ANY_VLAN, rx_accept_flags);
- bnx2x_set_bit(ECORE_ACCEPT_ANY_VLAN, tx_accept_flags);
+ rte_set_bit32(ECORE_ACCEPT_ANY_VLAN, rx_accept_flags);
+ rte_set_bit32(ECORE_ACCEPT_ANY_VLAN, tx_accept_flags);
}
return 0;
@@ -1542,7 +1518,7 @@ bnx2x_set_q_rx_mode(struct bnx2x_softc *sc, uint8_t cl_id,
ramrod_param.rdata = BNX2X_SP(sc, rx_mode_rdata);
ramrod_param.rdata_mapping =
(rte_iova_t)BNX2X_SP_MAPPING(sc, rx_mode_rdata),
- bnx2x_set_bit(ECORE_FILTER_RX_MODE_PENDING, &sc->sp_state);
+ rte_set_bit32(ECORE_FILTER_RX_MODE_PENDING, &sc->sp_state);
ramrod_param.ramrod_flags = ramrod_flags;
ramrod_param.rx_mode_flags = rx_mode_flags;
@@ -1571,9 +1547,9 @@ int bnx2x_set_storm_rx_mode(struct bnx2x_softc *sc)
return rc;
}
- bnx2x_set_bit(RAMROD_RX, &ramrod_flags);
- bnx2x_set_bit(RAMROD_TX, &ramrod_flags);
- bnx2x_set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
+ rte_set_bit32(RAMROD_RX, &ramrod_flags);
+ rte_set_bit32(RAMROD_TX, &ramrod_flags);
+ rte_set_bit32(RAMROD_COMP_WAIT, &ramrod_flags);
return bnx2x_set_q_rx_mode(sc, sc->fp[0].cl_id, rx_mode_flags,
rx_accept_flags, tx_accept_flags,
@@ -1698,7 +1674,7 @@ static int bnx2x_func_wait_started(struct bnx2x_softc *sc)
"Forcing STARTED-->TX_STOPPED-->STARTED");
func_params.f_obj = &sc->func_obj;
- bnx2x_set_bit(RAMROD_DRV_CLR_ONLY, &func_params.ramrod_flags);
+ rte_set_bit32(RAMROD_DRV_CLR_ONLY, &func_params.ramrod_flags);
/* STARTED-->TX_STOPPED */
func_params.cmd = ECORE_F_CMD_TX_STOP;
@@ -1722,7 +1698,7 @@ static int bnx2x_stop_queue(struct bnx2x_softc *sc, int index)
q_params.q_obj = &sc->sp_objs[fp->index].q_obj;
/* We want to wait for completion in this context */
- bnx2x_set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags);
+ rte_set_bit32(RAMROD_COMP_WAIT, &q_params.ramrod_flags);
/* Stop the primary connection: */
@@ -1783,7 +1759,7 @@ static int bnx2x_func_stop(struct bnx2x_softc *sc)
int rc;
/* prepare parameters for function state transitions */
- bnx2x_set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
+ rte_set_bit32(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
func_params.f_obj = &sc->func_obj;
func_params.cmd = ECORE_F_CMD_STOP;
@@ -1797,7 +1773,7 @@ static int bnx2x_func_stop(struct bnx2x_softc *sc)
if (rc) {
PMD_DRV_LOG(NOTICE, sc, "FUNC_STOP ramrod failed. "
"Running a dry transaction");
- bnx2x_set_bit(RAMROD_DRV_CLR_ONLY, &func_params.ramrod_flags);
+ rte_set_bit32(RAMROD_DRV_CLR_ONLY, &func_params.ramrod_flags);
return ecore_func_state_change(sc, &func_params);
}
@@ -1809,7 +1785,7 @@ static int bnx2x_reset_hw(struct bnx2x_softc *sc, uint32_t load_code)
struct ecore_func_state_params func_params = { NULL };
/* Prepare parameters for function state transitions */
- bnx2x_set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
+ rte_set_bit32(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
func_params.f_obj = &sc->func_obj;
func_params.cmd = ECORE_F_CMD_HW_RESET;
@@ -1866,11 +1842,10 @@ bnx2x_chip_cleanup(struct bnx2x_softc *sc, uint32_t unload_mode, uint8_t keep_li
* a race between the completion code and this code.
*/
- if (bnx2x_test_bit(ECORE_FILTER_RX_MODE_PENDING, &sc->sp_state)) {
- bnx2x_set_bit(ECORE_FILTER_RX_MODE_SCHED, &sc->sp_state);
- } else {
+ if (rte_get_bit32(ECORE_FILTER_RX_MODE_PENDING, &sc->sp_state))
+ rte_set_bit32(ECORE_FILTER_RX_MODE_SCHED, &sc->sp_state);
+ else
bnx2x_set_storm_rx_mode(sc);
- }
/* Clean up multicast configuration */
rparam.mcast_obj = &sc->mcast_obj;
@@ -1960,12 +1935,12 @@ static void bnx2x_squeeze_objects(struct bnx2x_softc *sc)
/* Cleanup MACs' object first... */
/* Wait for completion of requested */
- bnx2x_set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
+ rte_set_bit32(RAMROD_COMP_WAIT, &ramrod_flags);
/* Perform a dry cleanup */
- bnx2x_set_bit(RAMROD_DRV_CLR_ONLY, &ramrod_flags);
+ rte_set_bit32(RAMROD_DRV_CLR_ONLY, &ramrod_flags);
/* Clean ETH primary MAC */
- bnx2x_set_bit(ECORE_ETH_MAC, &vlan_mac_flags);
+ rte_set_bit32(ECORE_ETH_MAC, &vlan_mac_flags);
rc = mac_obj->delete_all(sc, &sc->sp_objs->mac_obj, &vlan_mac_flags,
&ramrod_flags);
if (rc != 0) {
@@ -1974,7 +1949,7 @@ static void bnx2x_squeeze_objects(struct bnx2x_softc *sc)
/* Cleanup UC list */
vlan_mac_flags = 0;
- bnx2x_set_bit(ECORE_UC_LIST_MAC, &vlan_mac_flags);
+ rte_set_bit32(ECORE_UC_LIST_MAC, &vlan_mac_flags);
rc = mac_obj->delete_all(sc, mac_obj, &vlan_mac_flags, &ramrod_flags);
if (rc != 0) {
PMD_DRV_LOG(NOTICE, sc,
@@ -1984,7 +1959,7 @@ static void bnx2x_squeeze_objects(struct bnx2x_softc *sc)
/* Now clean mcast object... */
rparam.mcast_obj = &sc->mcast_obj;
- bnx2x_set_bit(RAMROD_DRV_CLR_ONLY, &rparam.ramrod_flags);
+ rte_set_bit32(RAMROD_DRV_CLR_ONLY, &rparam.ramrod_flags);
/* Add a DEL command... */
rc = ecore_config_mcast(sc, &rparam, ECORE_MCAST_CMD_DEL);
@@ -4288,7 +4263,7 @@ bnx2x_handle_classification_eqe(struct bnx2x_softc *sc, union event_ring_elem *e
struct ecore_vlan_mac_obj *vlan_mac_obj;
/* always push next commands out, don't wait here */
- bnx2x_set_bit(RAMROD_CONT, &ramrod_flags);
+ rte_set_bit32(RAMROD_CONT, &ramrod_flags);
switch (le32toh(elem->message.data.eth_event.echo) >> BNX2X_SWCID_SHIFT) {
case ECORE_FILTER_MAC_PENDING:
@@ -4319,12 +4294,12 @@ bnx2x_handle_classification_eqe(struct bnx2x_softc *sc, union event_ring_elem *e
static void bnx2x_handle_rx_mode_eqe(struct bnx2x_softc *sc)
{
- bnx2x_clear_bit(ECORE_FILTER_RX_MODE_PENDING, &sc->sp_state);
+ rte_clear_bit32(ECORE_FILTER_RX_MODE_PENDING, &sc->sp_state);
/* send rx_mode command again if was requested */
- if (bnx2x_test_and_clear_bit(ECORE_FILTER_RX_MODE_SCHED, &sc->sp_state)) {
+ if (rte_test_and_clear_bit32(ECORE_FILTER_RX_MODE_SCHED,
+ &sc->sp_state))
bnx2x_set_storm_rx_mode(sc);
- }
}
static void bnx2x_update_eq_prod(struct bnx2x_softc *sc, uint16_t prod)
@@ -4693,7 +4668,7 @@ static int bnx2x_init_hw(struct bnx2x_softc *sc, uint32_t load_code)
PMD_INIT_FUNC_TRACE(sc);
/* prepare the parameters for function state transitions */
- bnx2x_set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
+ rte_set_bit32(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
func_params.f_obj = &sc->func_obj;
func_params.cmd = ECORE_F_CMD_HW_INIT;
@@ -4988,8 +4963,8 @@ static void bnx2x_init_eth_fp(struct bnx2x_softc *sc, int idx)
bnx2x_update_fp_sb_idx(fp);
/* Configure Queue State object */
- bnx2x_set_bit(ECORE_Q_TYPE_HAS_RX, &q_type);
- bnx2x_set_bit(ECORE_Q_TYPE_HAS_TX, &q_type);
+ rte_set_bit32(ECORE_Q_TYPE_HAS_RX, &q_type);
+ rte_set_bit32(ECORE_Q_TYPE_HAS_TX, &q_type);
ecore_init_queue_obj(sc,
&sc->sp_objs[idx].q_obj,
@@ -5803,7 +5778,7 @@ static int bnx2x_func_start(struct bnx2x_softc *sc)
&func_params.params.start;
/* Prepare parameters for function state transitions */
- bnx2x_set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
+ rte_set_bit32(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
func_params.f_obj = &sc->func_obj;
func_params.cmd = ECORE_F_CMD_START;
@@ -6379,11 +6354,11 @@ bnx2x_pf_q_prep_init(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp,
uint8_t cos;
int cxt_index, cxt_offset;
- bnx2x_set_bit(ECORE_Q_FLG_HC, &init_params->rx.flags);
- bnx2x_set_bit(ECORE_Q_FLG_HC, &init_params->tx.flags);
+ rte_set_bit32(ECORE_Q_FLG_HC, &init_params->rx.flags);
+ rte_set_bit32(ECORE_Q_FLG_HC, &init_params->tx.flags);
- bnx2x_set_bit(ECORE_Q_FLG_HC_EN, &init_params->rx.flags);
- bnx2x_set_bit(ECORE_Q_FLG_HC_EN, &init_params->tx.flags);
+ rte_set_bit32(ECORE_Q_FLG_HC_EN, &init_params->rx.flags);
+ rte_set_bit32(ECORE_Q_FLG_HC_EN, &init_params->tx.flags);
/* HC rate */
init_params->rx.hc_rate =
@@ -6417,7 +6392,7 @@ bnx2x_get_common_flags(struct bnx2x_softc *sc, uint8_t zero_stats)
unsigned long flags = 0;
/* PF driver will always initialize the Queue to an ACTIVE state */
- bnx2x_set_bit(ECORE_Q_FLG_ACTIVE, &flags);
+ rte_set_bit32(ECORE_Q_FLG_ACTIVE, &flags);
/*
* tx only connections collect statistics (on the same index as the
@@ -6425,9 +6400,9 @@ bnx2x_get_common_flags(struct bnx2x_softc *sc, uint8_t zero_stats)
* connection is initialized.
*/
- bnx2x_set_bit(ECORE_Q_FLG_STATS, &flags);
+ rte_set_bit32(ECORE_Q_FLG_STATS, &flags);
if (zero_stats) {
- bnx2x_set_bit(ECORE_Q_FLG_ZERO_STATS, &flags);
+ rte_set_bit32(ECORE_Q_FLG_ZERO_STATS, &flags);
}
/*
@@ -6435,10 +6410,10 @@ bnx2x_get_common_flags(struct bnx2x_softc *sc, uint8_t zero_stats)
* CoS-ness doesn't survive the loopback
*/
if (sc->flags & BNX2X_TX_SWITCHING) {
- bnx2x_set_bit(ECORE_Q_FLG_TX_SWITCH, &flags);
+ rte_set_bit32(ECORE_Q_FLG_TX_SWITCH, &flags);
}
- bnx2x_set_bit(ECORE_Q_FLG_PCSUM_ON_PKT, &flags);
+ rte_set_bit32(ECORE_Q_FLG_PCSUM_ON_PKT, &flags);
return flags;
}
@@ -6448,15 +6423,15 @@ static unsigned long bnx2x_get_q_flags(struct bnx2x_softc *sc, uint8_t leading)
unsigned long flags = 0;
if (IS_MF_SD(sc)) {
- bnx2x_set_bit(ECORE_Q_FLG_OV, &flags);
+ rte_set_bit32(ECORE_Q_FLG_OV, &flags);
}
if (leading) {
- bnx2x_set_bit(ECORE_Q_FLG_LEADING_RSS, &flags);
- bnx2x_set_bit(ECORE_Q_FLG_MCAST, &flags);
+ rte_set_bit32(ECORE_Q_FLG_LEADING_RSS, &flags);
+ rte_set_bit32(ECORE_Q_FLG_MCAST, &flags);
}
- bnx2x_set_bit(ECORE_Q_FLG_VLAN, &flags);
+ rte_set_bit32(ECORE_Q_FLG_VLAN, &flags);
/* merge with common flags */
return flags | bnx2x_get_common_flags(sc, TRUE);
@@ -6577,7 +6552,7 @@ bnx2x_setup_queue(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp, uint8_t lea
q_params.q_obj = &BNX2X_SP_OBJ(sc, fp).q_obj;
/* we want to wait for completion in this context */
- bnx2x_set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags);
+ rte_set_bit32(RAMROD_COMP_WAIT, &q_params.ramrod_flags);
/* prepare the INIT parameters */
bnx2x_pf_q_prep_init(sc, fp, &q_params.params.init);
@@ -6645,20 +6620,20 @@ bnx2x_config_rss_pf(struct bnx2x_softc *sc, struct ecore_rss_config_obj *rss_obj
params.rss_obj = rss_obj;
- bnx2x_set_bit(RAMROD_COMP_WAIT, ¶ms.ramrod_flags);
+ rte_set_bit32(RAMROD_COMP_WAIT, ¶ms.ramrod_flags);
- bnx2x_set_bit(ECORE_RSS_MODE_REGULAR, ¶ms.rss_flags);
+ rte_set_bit32(ECORE_RSS_MODE_REGULAR, ¶ms.rss_flags);
/* RSS configuration */
- bnx2x_set_bit(ECORE_RSS_IPV4, ¶ms.rss_flags);
- bnx2x_set_bit(ECORE_RSS_IPV4_TCP, ¶ms.rss_flags);
- bnx2x_set_bit(ECORE_RSS_IPV6, ¶ms.rss_flags);
- bnx2x_set_bit(ECORE_RSS_IPV6_TCP, ¶ms.rss_flags);
+ rte_set_bit32(ECORE_RSS_IPV4, ¶ms.rss_flags);
+ rte_set_bit32(ECORE_RSS_IPV4_TCP, ¶ms.rss_flags);
+ rte_set_bit32(ECORE_RSS_IPV6, ¶ms.rss_flags);
+ rte_set_bit32(ECORE_RSS_IPV6_TCP, ¶ms.rss_flags);
if (rss_obj->udp_rss_v4) {
- bnx2x_set_bit(ECORE_RSS_IPV4_UDP, ¶ms.rss_flags);
+ rte_set_bit32(ECORE_RSS_IPV4_UDP, ¶ms.rss_flags);
}
if (rss_obj->udp_rss_v6) {
- bnx2x_set_bit(ECORE_RSS_IPV6_UDP, ¶ms.rss_flags);
+ rte_set_bit32(ECORE_RSS_IPV6_UDP, ¶ms.rss_flags);
}
/* Hash bits */
@@ -6673,7 +6648,7 @@ bnx2x_config_rss_pf(struct bnx2x_softc *sc, struct ecore_rss_config_obj *rss_obj
params.rss_key[i] = (uint32_t) rte_rand();
}
- bnx2x_set_bit(ECORE_RSS_SET_SRCH, ¶ms.rss_flags);
+ rte_set_bit32(ECORE_RSS_SET_SRCH, ¶ms.rss_flags);
}
if (IS_PF(sc))
@@ -6730,11 +6705,11 @@ bnx2x_set_mac_one(struct bnx2x_softc *sc, uint8_t * mac,
ramrod_param.ramrod_flags = *ramrod_flags;
/* fill a user request section if needed */
- if (!bnx2x_test_bit(RAMROD_CONT, ramrod_flags)) {
+ if (!rte_get_bit32(RAMROD_CONT, ramrod_flags)) {
rte_memcpy(ramrod_param.user_req.u.mac.mac, mac,
ETH_ALEN);
- bnx2x_set_bit(mac_type, &ramrod_param.user_req.vlan_mac_flags);
+ rte_set_bit32(mac_type, &ramrod_param.user_req.vlan_mac_flags);
/* Set the command: ADD or DEL */
ramrod_param.user_req.cmd = (set) ? ECORE_VLAN_MAC_ADD :
@@ -6761,7 +6736,7 @@ static int bnx2x_set_eth_mac(struct bnx2x_softc *sc, uint8_t set)
PMD_DRV_LOG(DEBUG, sc, "Adding Ethernet MAC");
- bnx2x_set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
+ rte_set_bit32(RAMROD_COMP_WAIT, &ramrod_flags);
/* Eth MAC is set on RSS leading client (fp[0]) */
return bnx2x_set_mac_one(sc, sc->link_params.mac_addr,
@@ -6893,24 +6868,26 @@ bnx2x_fill_report_data(struct bnx2x_softc *sc, struct bnx2x_link_report_data *da
/* Link is down */
if (!sc->link_vars.link_up || (sc->flags & BNX2X_MF_FUNC_DIS)) {
- bnx2x_set_bit(BNX2X_LINK_REPORT_LINK_DOWN,
+ rte_set_bit32(BNX2X_LINK_REPORT_LINK_DOWN,
&data->link_report_flags);
}
/* Full DUPLEX */
if (sc->link_vars.duplex == DUPLEX_FULL) {
- bnx2x_set_bit(BNX2X_LINK_REPORT_FULL_DUPLEX,
+ rte_set_bit32(BNX2X_LINK_REPORT_FULL_DUPLEX,
&data->link_report_flags);
}
/* Rx Flow Control is ON */
if (sc->link_vars.flow_ctrl & ELINK_FLOW_CTRL_RX) {
- bnx2x_set_bit(BNX2X_LINK_REPORT_RX_FC_ON, &data->link_report_flags);
+ rte_set_bit32(BNX2X_LINK_REPORT_RX_FC_ON,
+ &data->link_report_flags);
}
/* Tx Flow Control is ON */
if (sc->link_vars.flow_ctrl & ELINK_FLOW_CTRL_TX) {
- bnx2x_set_bit(BNX2X_LINK_REPORT_TX_FC_ON, &data->link_report_flags);
+ rte_set_bit32(BNX2X_LINK_REPORT_TX_FC_ON,
+ &data->link_report_flags);
}
}
@@ -6929,9 +6906,9 @@ static void bnx2x_link_report_locked(struct bnx2x_softc *sc)
/* Don't report link down or exactly the same link status twice */
if (!memcmp(&cur_data, &sc->last_reported_link, sizeof(cur_data)) ||
- (bnx2x_test_bit(BNX2X_LINK_REPORT_LINK_DOWN,
+ (rte_get_bit32(BNX2X_LINK_REPORT_LINK_DOWN,
&sc->last_reported_link.link_report_flags) &&
- bnx2x_test_bit(BNX2X_LINK_REPORT_LINK_DOWN,
+ rte_get_bit32(BNX2X_LINK_REPORT_LINK_DOWN,
&cur_data.link_report_flags))) {
return;
}
@@ -6946,14 +6923,14 @@ static void bnx2x_link_report_locked(struct bnx2x_softc *sc)
/* report new link params and remember the state for the next time */
rte_memcpy(&sc->last_reported_link, &cur_data, sizeof(cur_data));
- if (bnx2x_test_bit(BNX2X_LINK_REPORT_LINK_DOWN,
+ if (rte_get_bit32(BNX2X_LINK_REPORT_LINK_DOWN,
&cur_data.link_report_flags)) {
ELINK_DEBUG_P0(sc, "NIC Link is Down");
} else {
__rte_unused const char *duplex;
__rte_unused const char *flow;
- if (bnx2x_test_and_clear_bit(BNX2X_LINK_REPORT_FULL_DUPLEX,
+ if (rte_test_and_clear_bit32(BNX2X_LINK_REPORT_FULL_DUPLEX,
&cur_data.link_report_flags)) {
duplex = "full";
ELINK_DEBUG_P0(sc, "link set to full duplex");
@@ -6968,19 +6945,19 @@ static void bnx2x_link_report_locked(struct bnx2x_softc *sc)
* enabled.
*/
if (cur_data.link_report_flags) {
- if (bnx2x_test_bit(BNX2X_LINK_REPORT_RX_FC_ON,
+ if (rte_get_bit32(BNX2X_LINK_REPORT_RX_FC_ON,
&cur_data.link_report_flags) &&
- bnx2x_test_bit(BNX2X_LINK_REPORT_TX_FC_ON,
+ rte_get_bit32(BNX2X_LINK_REPORT_TX_FC_ON,
&cur_data.link_report_flags)) {
flow = "ON - receive & transmit";
- } else if (bnx2x_test_bit(BNX2X_LINK_REPORT_RX_FC_ON,
+ } else if (rte_get_bit32(BNX2X_LINK_REPORT_RX_FC_ON,
&cur_data.link_report_flags) &&
- !bnx2x_test_bit(BNX2X_LINK_REPORT_TX_FC_ON,
+ !rte_get_bit32(BNX2X_LINK_REPORT_TX_FC_ON,
&cur_data.link_report_flags)) {
flow = "ON - receive";
- } else if (!bnx2x_test_bit(BNX2X_LINK_REPORT_RX_FC_ON,
+ } else if (!rte_get_bit32(BNX2X_LINK_REPORT_RX_FC_ON,
&cur_data.link_report_flags) &&
- bnx2x_test_bit(BNX2X_LINK_REPORT_TX_FC_ON,
+ rte_get_bit32(BNX2X_LINK_REPORT_TX_FC_ON,
&cur_data.link_report_flags)) {
flow = "ON - transmit";
} else {
diff --git a/drivers/net/bnx2x/bnx2x.h b/drivers/net/bnx2x/bnx2x.h
index 3383c7675..e6e66e870 100644
--- a/drivers/net/bnx2x/bnx2x.h
+++ b/drivers/net/bnx2x/bnx2x.h
@@ -1809,10 +1809,6 @@ static const uint32_t dmae_reg_go_c[] = {
#define PCI_PM_D0 1
#define PCI_PM_D3hot 2
-int bnx2x_test_bit(int nr, volatile unsigned long * addr);
-void bnx2x_set_bit(unsigned int nr, volatile unsigned long * addr);
-void bnx2x_clear_bit(int nr, volatile unsigned long * addr);
-int bnx2x_test_and_clear_bit(int nr, volatile unsigned long * addr);
int bnx2x_cmpxchg(volatile int *addr, int old, int new);
int bnx2x_dma_alloc(struct bnx2x_softc *sc, size_t size,
diff --git a/drivers/net/bnx2x/ecore_sp.h b/drivers/net/bnx2x/ecore_sp.h
index cc1db377a..59a2e8e39 100644
--- a/drivers/net/bnx2x/ecore_sp.h
+++ b/drivers/net/bnx2x/ecore_sp.h
@@ -15,6 +15,7 @@
#define ECORE_SP_H
#include <rte_byteorder.h>
+#include <rte_bitops.h>
#if RTE_BYTE_ORDER == RTE_LITTLE_ENDIAN
#ifndef __LITTLE_ENDIAN
@@ -73,10 +74,10 @@ typedef rte_spinlock_t ECORE_MUTEX_SPIN;
#define ECORE_SET_BIT_NA(bit, var) (*var |= (1 << bit))
#define ECORE_CLEAR_BIT_NA(bit, var) (*var &= ~(1 << bit))
-#define ECORE_TEST_BIT(bit, var) bnx2x_test_bit(bit, var)
-#define ECORE_SET_BIT(bit, var) bnx2x_set_bit(bit, var)
-#define ECORE_CLEAR_BIT(bit, var) bnx2x_clear_bit(bit, var)
-#define ECORE_TEST_AND_CLEAR_BIT(bit, var) bnx2x_test_and_clear_bit(bit, var)
+#define ECORE_TEST_BIT(bit, var) rte_get_bit32(bit, var)
+#define ECORE_SET_BIT(bit, var) rte_set_bit32(bit, var)
+#define ECORE_CLEAR_BIT(bit, var) rte_clear_bit32(bit, var)
+#define ECORE_TEST_AND_CLEAR_BIT(bit, var) rte_test_and_clear_bit32(bit, var)
#define atomic_load_acq_int (int)*
#define atomic_store_rel_int(a, v) (*a = v)
--
2.17.1
next prev parent reply other threads:[~2019-11-18 10:07 UTC|newest]
Thread overview: 141+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-15 7:49 [dpdk-dev] [PATCH v1 0/5] implement common rte bit operation APIs in PMDs Joyce Kong
2019-10-15 7:49 ` [dpdk-dev] [PATCH v1 1/5] lib/eal: implement the family of rte bit operation APIs Joyce Kong
2019-10-15 16:53 ` Stephen Hemminger
2019-10-18 9:00 ` Joyce Kong (Arm Technology China)
2019-10-16 7:54 ` Jerin Jacob
2019-10-18 9:02 ` Joyce Kong (Arm Technology China)
2019-10-23 3:12 ` Joyce Kong (Arm Technology China)
2019-10-16 19:05 ` Stephen Hemminger
2019-10-17 13:32 ` [dpdk-dev] [PATCH v1 1/5] lib/eal: implement the family of rte bitoperation APIs Morten Brørup
2019-10-18 8:58 ` Joyce Kong (Arm Technology China)
2019-10-23 3:07 ` Joyce Kong (Arm Technology China)
2019-10-23 7:45 ` Morten Brørup
2019-10-23 17:30 ` Honnappa Nagarahalli
2019-10-24 3:38 ` Gavin Hu (Arm Technology China)
2019-11-01 13:48 ` Honnappa Nagarahalli
2019-11-03 15:45 ` Gavin Hu (Arm Technology China)
2019-10-15 7:49 ` [dpdk-dev] [PATCH v1 2/5] net/axgbe: use common rte bit operation APIs instead Joyce Kong
2019-10-15 7:49 ` [dpdk-dev] [PATCH v1 3/5] net/bnx2x: " Joyce Kong
2019-10-15 7:50 ` [dpdk-dev] [PATCH v1 4/5] net/hinic: " Joyce Kong
2019-10-15 7:50 ` [dpdk-dev] [PATCH v1 5/5] net/qede: " Joyce Kong
2019-10-15 16:51 ` [dpdk-dev] [PATCH v1 0/5] implement common rte bit operation APIs in PMDs Stephen Hemminger
2019-10-18 9:01 ` Joyce Kong (Arm Technology China)
2019-10-23 2:54 ` [dpdk-dev] [PATCH v2 0/6] " Joyce Kong
2019-10-25 13:14 ` David Marchand
2019-10-29 16:42 ` Thomas Monjalon
2019-10-30 9:55 ` Gavin Hu (Arm Technology China)
2019-10-30 10:17 ` Thomas Monjalon
2019-10-30 12:32 ` Jerin Jacob
2019-10-30 13:02 ` Morten Brørup
2019-10-31 10:39 ` Gavin Hu (Arm Technology China)
2019-10-23 2:54 ` [dpdk-dev] [PATCH v2 1/6] lib/eal: implement the family of rte bit operation APIs Joyce Kong
2019-10-23 3:09 ` Honnappa Nagarahalli
2019-10-23 4:56 ` Jerin Jacob
2019-10-23 7:46 ` Morten Brørup
2019-10-23 2:54 ` [dpdk-dev] [PATCH v2 2/6] test/iobitops: add io bit operation test case Joyce Kong
2019-10-23 2:54 ` [dpdk-dev] [PATCH v2 3/6] net/axgbe: use common rte bit operation APIs instead Joyce Kong
2019-10-23 3:16 ` Honnappa Nagarahalli
2019-10-23 2:54 ` [dpdk-dev] [PATCH v2 4/6] net/bnx2x: " Joyce Kong
2019-10-23 2:54 ` [dpdk-dev] [PATCH v2 5/6] net/hinic: " Joyce Kong
2019-10-23 2:54 ` [dpdk-dev] [PATCH v2 6/6] net/qede: " Joyce Kong
2019-11-18 10:06 ` [dpdk-dev] [PATCH v3 0/6] implement common rte bit operation APIs in PMDs Joyce Kong
2019-11-18 10:06 ` [dpdk-dev] [PATCH v3 1/6] lib/eal: implement the family of rte bit operation APIs Joyce Kong
2019-11-18 10:52 ` [dpdk-dev] [PATCH v3 1/6] lib/eal: implement the family of rte bitoperation APIs Morten Brørup
2019-11-19 9:22 ` Joyce Kong (Arm Technology China)
2019-11-18 10:06 ` [dpdk-dev] [PATCH v3 2/6] test/bitops: add bit operation test case Joyce Kong
2019-11-18 10:06 ` [dpdk-dev] [PATCH v3 3/6] net/axgbe: use common rte bit operation APIs instead Joyce Kong
2019-11-18 10:06 ` Joyce Kong [this message]
2019-11-18 10:06 ` [dpdk-dev] [PATCH v3 5/6] net/qede: " Joyce Kong
2019-11-18 10:06 ` [dpdk-dev] [PATCH v3 6/6] net/hinic: " Joyce Kong
2019-11-20 10:12 ` [dpdk-dev] [PATCH v4 0/6] implement common rte bit operation APIs in PMDs Joyce Kong
2019-11-20 10:12 ` [dpdk-dev] [PATCH v4 1/6] lib/eal: implement the family of rte bit operation APIs Joyce Kong
2019-11-20 13:40 ` [dpdk-dev] [PATCH v4 1/6] lib/eal: implement the family of rte bitoperation APIs Morten Brørup
2019-11-20 10:12 ` [dpdk-dev] [PATCH v4 2/6] test/bitops: add bit operation test case Joyce Kong
2019-11-20 10:12 ` [dpdk-dev] [PATCH v4 3/6] net/axgbe: use common rte bit operation APIs instead Joyce Kong
2019-11-20 10:12 ` [dpdk-dev] [PATCH v4 4/6] net/bnx2x: " Joyce Kong
2019-11-20 10:12 ` [dpdk-dev] [PATCH v4 5/6] net/qede: " Joyce Kong
2019-11-20 10:12 ` [dpdk-dev] [PATCH v4 6/6] net/hinic: " Joyce Kong
2019-11-28 6:44 ` [dpdk-dev] [PATCH v5 0/6] implement common rte bit operation APIs in PMDs Joyce Kong
2019-11-28 6:44 ` [dpdk-dev] [PATCH v5 1/6] lib/eal: implement the family of rte bit operation APIs Joyce Kong
2019-11-28 6:44 ` [dpdk-dev] [PATCH v5 2/6] test/bitops: add bit operation test case Joyce Kong
2019-11-28 6:44 ` [dpdk-dev] [PATCH v5 3/6] net/axgbe: use common rte bit operation APIs instead Joyce Kong
2019-12-02 6:09 ` Gavin Hu (Arm Technology China)
2019-12-02 9:12 ` Thomas Monjalon
2019-12-02 9:24 ` [dpdk-dev] [PATCH v5 3/6] net/axgbe: use common rte bitoperation " Morten Brørup
2019-12-02 9:30 ` Thomas Monjalon
2019-12-02 16:53 ` Stephen Hemminger
2019-12-03 6:52 ` Gavin Hu (Arm Technology China)
2019-11-28 6:44 ` [dpdk-dev] [PATCH v5 4/6] net/bnx2x: use common rte bit operation " Joyce Kong
2019-11-28 6:44 ` [dpdk-dev] [PATCH v5 5/6] net/qede: " Joyce Kong
2019-11-28 6:44 ` [dpdk-dev] [PATCH v5 6/6] net/hinic: " Joyce Kong
2019-12-18 6:00 ` [dpdk-dev] [PATCH v6 0/6] implement common rte bit operation APIs in PMDs Joyce Kong
2019-12-18 6:55 ` Gavin Hu
2020-01-17 13:03 ` David Marchand
2019-12-18 6:00 ` [dpdk-dev] [PATCH v6 1/6] lib/eal: implement the family of rte bit operation APIs Joyce Kong
2019-12-20 6:52 ` Honnappa Nagarahalli
2019-12-21 16:07 ` Honnappa Nagarahalli
2019-12-21 18:07 ` Stephen Hemminger
2019-12-23 5:04 ` Honnappa Nagarahalli
2019-12-23 16:36 ` Stephen Hemminger
2019-12-30 3:02 ` Gavin Hu
2020-01-07 0:44 ` Honnappa Nagarahalli
2020-01-07 1:26 ` Stephen Hemminger
2020-01-07 4:41 ` Honnappa Nagarahalli
2020-01-07 0:41 ` Honnappa Nagarahalli
2019-12-21 18:08 ` Stephen Hemminger
2019-12-23 5:45 ` Honnappa Nagarahalli
2019-12-23 8:59 ` Jerin Jacob
2019-12-18 6:00 ` [dpdk-dev] [PATCH v6 2/6] test/bitops: add bit operation test case Joyce Kong
2019-12-18 6:00 ` [dpdk-dev] [PATCH v6 3/6] net/axgbe: use common rte bit operation APIs instead Joyce Kong
2019-12-18 6:00 ` [dpdk-dev] [PATCH v6 4/6] net/bnx2x: " Joyce Kong
2019-12-18 6:00 ` [dpdk-dev] [PATCH v6 5/6] net/qede: " Joyce Kong
2019-12-18 6:00 ` [dpdk-dev] [PATCH v6 6/6] net/hinic: " Joyce Kong
2020-03-09 9:54 ` [dpdk-dev] [PATCH v7 0/6] implement common rte bit operation APIs in PMDs Joyce Kong
2020-03-09 9:54 ` [dpdk-dev] [PATCH v7 1/6] lib/eal: implement the family of PMD bit operation APIs Joyce Kong
2020-03-09 15:50 ` Stephen Hemminger
2020-03-31 22:35 ` Thomas Monjalon
2020-04-01 8:27 ` Gavin Hu
2020-04-01 9:45 ` Thomas Monjalon
2020-04-02 7:20 ` Gavin Hu
2020-04-02 8:07 ` Thomas Monjalon
2020-04-02 8:11 ` Jerin Jacob
2020-04-02 9:02 ` Gavin Hu
2020-03-09 9:54 ` [dpdk-dev] [PATCH v7 2/6] test/pmdbitops: add PMD bit operation test case Joyce Kong
2020-03-09 9:54 ` [dpdk-dev] [PATCH v7 3/6] net/axgbe: use common rte bit operation APIs instead Joyce Kong
2020-03-09 9:54 ` [dpdk-dev] [PATCH v7 4/6] net/bnx2x: " Joyce Kong
2020-03-09 9:54 ` [dpdk-dev] [PATCH v7 5/6] net/qede: " Joyce Kong
2020-03-09 9:54 ` [dpdk-dev] [PATCH v7 6/6] net/hinic: " Joyce Kong
2020-04-16 5:38 ` [dpdk-dev] [PATCH v8 0/6] implement common bit operation APIs Joyce Kong
2020-04-16 5:38 ` [dpdk-dev] [PATCH v8 1/6] lib/eal: implement the family of " Joyce Kong
2020-04-16 18:55 ` [dpdk-dev] [PATCH v8 1/6] lib/eal: implement the family of commonbit " Morten Brørup
2020-04-17 8:18 ` Joyce Kong
2020-04-17 9:38 ` [dpdk-dev] [PATCH v8 1/6] lib/eal: implement the family of common bit " Jerin Jacob
2020-04-20 2:46 ` Joyce Kong
2020-04-16 5:38 ` [dpdk-dev] [PATCH v8 2/6] test/bitops: add bit operation test case Joyce Kong
2020-04-16 5:38 ` [dpdk-dev] [PATCH v8 3/6] net/axgbe: use common rte bit operation APIs instead Joyce Kong
2020-04-16 5:38 ` [dpdk-dev] [PATCH v8 4/6] net/bnx2x: " Joyce Kong
2020-04-16 5:38 ` [dpdk-dev] [PATCH v8 5/6] net/qede: " Joyce Kong
2020-04-16 5:38 ` [dpdk-dev] [PATCH v8 6/6] net/hinic: " Joyce Kong
2020-04-24 3:21 ` [dpdk-dev] [PATCH v9 0/6] implement common bit operation APIs Joyce Kong
2020-04-24 3:21 ` [dpdk-dev] [PATCH v9 1/6] lib/eal: implement the family of " Joyce Kong
2020-04-24 8:08 ` Thomas Monjalon
2020-04-26 2:07 ` Joyce Kong
2020-04-25 19:59 ` Thomas Monjalon
2020-04-26 7:18 ` Joyce Kong
2020-04-26 9:23 ` Thomas Monjalon
2020-04-24 3:21 ` [dpdk-dev] [PATCH v9 2/6] test/bitops: add bit operation test case Joyce Kong
2020-04-24 3:21 ` [dpdk-dev] [PATCH v9 3/6] net/axgbe: use common rte bit operation APIs instead Joyce Kong
2020-04-24 3:21 ` [dpdk-dev] [PATCH v9 4/6] net/bnx2x: " Joyce Kong
2020-04-24 3:21 ` [dpdk-dev] [PATCH v9 5/6] net/qede: " Joyce Kong
2020-04-24 3:21 ` [dpdk-dev] [PATCH v9 6/6] net/hinic: " Joyce Kong
2020-04-27 7:58 ` [dpdk-dev] [PATCH v10 0/6] implement common bit operation APIs Joyce Kong
2020-06-16 12:36 ` Thomas Monjalon
2020-04-27 7:58 ` [dpdk-dev] [PATCH v10 1/6] lib/eal: implement the family of " Joyce Kong
2020-04-27 7:58 ` [dpdk-dev] [PATCH v10 2/6] test/bitops: add bit operation test case Joyce Kong
2020-04-27 7:58 ` [dpdk-dev] [PATCH v10 3/6] net/axgbe: use common rte bit operation APIs instead Joyce Kong
2020-04-27 7:58 ` [dpdk-dev] [PATCH v10 4/6] net/bnx2x: " Joyce Kong
2024-02-17 12:01 ` Mattias Rönnblom
2024-02-17 14:25 ` Thomas Monjalon
2020-04-27 7:58 ` [dpdk-dev] [PATCH v10 5/6] net/qede: " Joyce Kong
2020-04-27 7:58 ` [dpdk-dev] [PATCH v10 6/6] net/hinic: " Joyce Kong
2020-06-16 12:31 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1574071619-10407-5-git-send-email-joyce.kong@arm.com \
--to=joyce.kong@arm.com \
--cc=cloud.wangxiaoyun@huawei.com \
--cc=david.marchand@redhat.com \
--cc=dev@dpdk.org \
--cc=gavin.hu@arm.com \
--cc=honnappa.nagarahalli@arm.com \
--cc=jerinj@marvell.com \
--cc=mb@smartsharesystems.com \
--cc=nd@arm.com \
--cc=ravi1.kumar@amd.com \
--cc=rmody@marvell.com \
--cc=shshaikh@marvell.com \
--cc=stephen@networkplumber.org \
--cc=thomas@monjalon.net \
--cc=xuanziyang2@huawei.com \
--cc=zhouguoyang@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).