DPDK-dev Archive on lore.kernel.org
 help / color / Atom feed
From: Andrew Rybchenko <arybchenko@solarflare.com>
To: Chas Williams <chas3@att.com>
Cc: <dev@dpdk.org>, <stable@dpdk.org>
Subject: [dpdk-dev] [PATCH] net/bonding: do not inherit slave device configuration
Date: Tue, 19 Nov 2019 09:03:40 +0000
Message-ID: <1574154221-8628-1-git-send-email-arybchenko@solarflare.com> (raw)

Bonding device should control bonded devices configuration.

Also avoid usage of slave's data->dev_conf.

Fixes: 2efb58cbab6e ("bond: new link bonding library")
Cc: stable@dpdk.org

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
---
 drivers/net/bonding/rte_eth_bond_pmd.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/net/bonding/rte_eth_bond_pmd.c b/drivers/net/bonding/rte_eth_bond_pmd.c
index 707a0f3cdd..4f0e83205d 100644
--- a/drivers/net/bonding/rte_eth_bond_pmd.c
+++ b/drivers/net/bonding/rte_eth_bond_pmd.c
@@ -1679,6 +1679,7 @@ int
 slave_configure(struct rte_eth_dev *bonded_eth_dev,
 		struct rte_eth_dev *slave_eth_dev)
 {
+	struct rte_eth_conf dev_conf;
 	struct bond_rx_queue *bd_rx_q;
 	struct bond_tx_queue *bd_tx_q;
 	uint16_t nb_rx_queues;
@@ -1693,34 +1694,34 @@ slave_configure(struct rte_eth_dev *bonded_eth_dev,
 	/* Stop slave */
 	rte_eth_dev_stop(slave_eth_dev->data->port_id);
 
+	memset(&dev_conf, 0, sizeof(dev_conf));
+
 	/* Enable interrupts on slave device if supported */
 	if (slave_eth_dev->data->dev_flags & RTE_ETH_DEV_INTR_LSC)
-		slave_eth_dev->data->dev_conf.intr_conf.lsc = 1;
+		dev_conf.intr_conf.lsc = 1;
 
 	/* If RSS is enabled for bonding, try to enable it for slaves  */
 	if (bonded_eth_dev->data->dev_conf.rxmode.mq_mode & ETH_MQ_RX_RSS_FLAG) {
 		if (internals->rss_key_len != 0) {
-			slave_eth_dev->data->dev_conf.rx_adv_conf.rss_conf.rss_key_len =
+			dev_conf.rx_adv_conf.rss_conf.rss_key_len =
 					internals->rss_key_len;
-			slave_eth_dev->data->dev_conf.rx_adv_conf.rss_conf.rss_key =
+			dev_conf.rx_adv_conf.rss_conf.rss_key =
 					internals->rss_key;
 		} else {
-			slave_eth_dev->data->dev_conf.rx_adv_conf.rss_conf.rss_key = NULL;
+			dev_conf.rx_adv_conf.rss_conf.rss_key = NULL;
 		}
 
-		slave_eth_dev->data->dev_conf.rx_adv_conf.rss_conf.rss_hf =
+		dev_conf.rx_adv_conf.rss_conf.rss_hf =
 				bonded_eth_dev->data->dev_conf.rx_adv_conf.rss_conf.rss_hf;
-		slave_eth_dev->data->dev_conf.rxmode.mq_mode =
+		dev_conf.rxmode.mq_mode =
 				bonded_eth_dev->data->dev_conf.rxmode.mq_mode;
 	}
 
 	if (bonded_eth_dev->data->dev_conf.rxmode.offloads &
 			DEV_RX_OFFLOAD_VLAN_FILTER)
-		slave_eth_dev->data->dev_conf.rxmode.offloads |=
-				DEV_RX_OFFLOAD_VLAN_FILTER;
+		dev_conf.rxmode.offloads |= DEV_RX_OFFLOAD_VLAN_FILTER;
 	else
-		slave_eth_dev->data->dev_conf.rxmode.offloads &=
-				~DEV_RX_OFFLOAD_VLAN_FILTER;
+		dev_conf.rxmode.offloads &= ~DEV_RX_OFFLOAD_VLAN_FILTER;
 
 	nb_rx_queues = bonded_eth_dev->data->nb_rx_queues;
 	nb_tx_queues = bonded_eth_dev->data->nb_tx_queues;
@@ -1742,8 +1743,7 @@ slave_configure(struct rte_eth_dev *bonded_eth_dev,
 
 	/* Configure device */
 	errval = rte_eth_dev_configure(slave_eth_dev->data->port_id,
-			nb_rx_queues, nb_tx_queues,
-			&(slave_eth_dev->data->dev_conf));
+			nb_rx_queues, nb_tx_queues, &dev_conf);
 	if (errval != 0) {
 		RTE_BOND_LOG(ERR, "Cannot configure slave device: port %u, err (%d)",
 				slave_eth_dev->data->port_id, errval);
-- 
2.17.1


             reply index

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-19  9:03 Andrew Rybchenko [this message]
2019-11-19 12:18 ` [dpdk-dev] [dpdk-stable] " Ferruh Yigit
2019-11-19 12:40   ` Andrew Rybchenko
2019-12-03 10:17     ` Ferruh Yigit
2019-12-08 15:44     ` Chas Williams
2019-12-09  7:16       ` Andrew Rybchenko
2019-12-09 13:36         ` Chas Williams
2019-12-09 14:31           ` Andrew Rybchenko
2019-12-09 14:45             ` Chas Williams

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1574154221-8628-1-git-send-email-arybchenko@solarflare.com \
    --to=arybchenko@solarflare.com \
    --cc=chas3@att.com \
    --cc=dev@dpdk.org \
    --cc=stable@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK-dev Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/dpdk-dev/0 dpdk-dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dpdk-dev dpdk-dev/ https://lore.kernel.org/dpdk-dev \
		dev@dpdk.org
	public-inbox-index dpdk-dev

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git