dev.dpdk.org archive mirror
 help / color / mirror / Atom feed
From: Gavin Hu <gavin.hu@arm.com>
To: dev@dpdk.org
Cc: nd@arm.com, david.marchand@redhat.com, thomas@monjalon.net,
	rasland@mellanox.com, maxime.coquelin@redhat.com,
	tiwei.bie@intel.com, hemant.agrawal@nxp.com, jerinj@marvell.com,
	pbhagavatula@marvell.com, Honnappa.Nagarahalli@arm.com,
	ruifeng.wang@arm.com, phil.yang@arm.com, joyce.kong@arm.com,
	steve.capper@arm.com
Subject: [dpdk-dev] [PATCH v2 2/3] net/virtio: virtual PCI requires smp barriers
Date: Fri, 20 Dec 2019 11:09:50 +0800	[thread overview]
Message-ID: <1576811391-19131-3-git-send-email-gavin.hu@arm.com> (raw)
In-Reply-To: <1576811391-19131-1-git-send-email-gavin.hu@arm.com>
In-Reply-To: <1571758074-16445-1-git-send-email-gavin.hu@arm.com>

Other than real PCI reads and writes to the device memory requiring
the io barriers, virtual pci memories are normal memory in the smp
configuration, which requires the smp barriers.

Since the smp barriers and io barriers are identical on x86 and PPC,
this change has only effect on aarch64.

As far as peripheral coherence order for ‘virtual’ devices, the arch
intent is that the Hypervisor view of things takes precedence – since
translations are made in holistic manner as the full stage1+stage2
regime, there is no such thing as a transaction taking on “EL1”
mapping as far as ordering. If the Hypervisor maps stage2 as Normal
but the OS at EL1 maps it as Device-nGnRE, then it’s Normal memory and
follows the ordering rules for Normal memory.

Signed-off-by: Gavin Hu <gavin.hu@arm.com>
---
 drivers/net/virtio/virtio_pci.c | 108 +++++++++++++++++++++++++++++-----------
 1 file changed, 78 insertions(+), 30 deletions(-)

diff --git a/drivers/net/virtio/virtio_pci.c b/drivers/net/virtio/virtio_pci.c
index 4468e89..64aa0a0 100644
--- a/drivers/net/virtio/virtio_pci.c
+++ b/drivers/net/virtio/virtio_pci.c
@@ -24,6 +24,54 @@
 #define PCI_CAP_ID_VNDR		0x09
 #define PCI_CAP_ID_MSIX		0x11
 
+static __rte_always_inline uint8_t
+virtio_pci_read8(const volatile void *addr)
+{
+	uint8_t val;
+	val = rte_read8_relaxed(addr);
+	rte_smp_rmb();
+	return val;
+}
+
+static __rte_always_inline uint16_t
+virtio_pci_read16(const volatile void *addr)
+{
+	uint16_t val;
+	val = rte_read16_relaxed(addr);
+	rte_smp_rmb();
+	return val;
+}
+
+static __rte_always_inline uint32_t
+virtio_pci_read32(const volatile void *addr)
+{
+	uint32_t val;
+	val = rte_read32_relaxed(addr);
+	rte_smp_rmb();
+	return val;
+}
+
+static __rte_always_inline void
+virtio_pci_write8(uint8_t value, volatile void *addr)
+{
+	rte_smp_wmb();
+	rte_write8_relaxed(value, addr);
+}
+
+static __rte_always_inline void
+virtio_pci_write16(uint16_t value, volatile void *addr)
+{
+	rte_smp_wmb();
+	rte_write16_relaxed(value, addr);
+}
+
+static __rte_always_inline void
+virtio_pci_write32(uint32_t value, volatile void *addr)
+{
+	rte_smp_wmb();
+	rte_write32_relaxed(value, addr);
+}
+
 /*
  * The remaining space is defined by each driver as the per-driver
  * configuration space.
@@ -260,8 +308,8 @@ const struct virtio_pci_ops legacy_ops = {
 static inline void
 io_write64_twopart(uint64_t val, uint32_t *lo, uint32_t *hi)
 {
-	rte_write32(val & ((1ULL << 32) - 1), lo);
-	rte_write32(val >> 32,		     hi);
+	virtio_pci_write32(val & ((1ULL << 32) - 1), lo);
+	virtio_pci_write32(val >> 32,		     hi);
 }
 
 static void
@@ -273,13 +321,13 @@ modern_read_dev_config(struct virtio_hw *hw, size_t offset,
 	uint8_t old_gen, new_gen;
 
 	do {
-		old_gen = rte_read8(&hw->common_cfg->config_generation);
+		old_gen = virtio_pci_read8(&hw->common_cfg->config_generation);
 
 		p = dst;
 		for (i = 0;  i < length; i++)
-			*p++ = rte_read8((uint8_t *)hw->dev_cfg + offset + i);
+			*p++ = virtio_pci_read8((uint8_t *)hw->dev_cfg + offset + i);
 
-		new_gen = rte_read8(&hw->common_cfg->config_generation);
+		new_gen = virtio_pci_read8(&hw->common_cfg->config_generation);
 	} while (old_gen != new_gen);
 }
 
@@ -291,7 +339,7 @@ modern_write_dev_config(struct virtio_hw *hw, size_t offset,
 	const uint8_t *p = src;
 
 	for (i = 0;  i < length; i++)
-		rte_write8((*p++), (((uint8_t *)hw->dev_cfg) + offset + i));
+		virtio_pci_write8((*p++), (((uint8_t *)hw->dev_cfg) + offset + i));
 }
 
 static uint64_t
@@ -299,11 +347,11 @@ modern_get_features(struct virtio_hw *hw)
 {
 	uint32_t features_lo, features_hi;
 
-	rte_write32(0, &hw->common_cfg->device_feature_select);
-	features_lo = rte_read32(&hw->common_cfg->device_feature);
+	virtio_pci_write32(0, &hw->common_cfg->device_feature_select);
+	features_lo = virtio_pci_read32(&hw->common_cfg->device_feature);
 
-	rte_write32(1, &hw->common_cfg->device_feature_select);
-	features_hi = rte_read32(&hw->common_cfg->device_feature);
+	virtio_pci_write32(1, &hw->common_cfg->device_feature_select);
+	features_hi = virtio_pci_read32(&hw->common_cfg->device_feature);
 
 	return ((uint64_t)features_hi << 32) | features_lo;
 }
@@ -311,53 +359,53 @@ modern_get_features(struct virtio_hw *hw)
 static void
 modern_set_features(struct virtio_hw *hw, uint64_t features)
 {
-	rte_write32(0, &hw->common_cfg->guest_feature_select);
-	rte_write32(features & ((1ULL << 32) - 1),
+	virtio_pci_write32(0, &hw->common_cfg->guest_feature_select);
+	virtio_pci_write32(features & ((1ULL << 32) - 1),
 		    &hw->common_cfg->guest_feature);
 
-	rte_write32(1, &hw->common_cfg->guest_feature_select);
-	rte_write32(features >> 32,
+	virtio_pci_write32(1, &hw->common_cfg->guest_feature_select);
+	virtio_pci_write32(features >> 32,
 		    &hw->common_cfg->guest_feature);
 }
 
 static uint8_t
 modern_get_status(struct virtio_hw *hw)
 {
-	return rte_read8(&hw->common_cfg->device_status);
+	return virtio_pci_read8(&hw->common_cfg->device_status);
 }
 
 static void
 modern_set_status(struct virtio_hw *hw, uint8_t status)
 {
-	rte_write8(status, &hw->common_cfg->device_status);
+	virtio_pci_write8(status, &hw->common_cfg->device_status);
 }
 
 static uint8_t
 modern_get_isr(struct virtio_hw *hw)
 {
-	return rte_read8(hw->isr);
+	return virtio_pci_read8(hw->isr);
 }
 
 static uint16_t
 modern_set_config_irq(struct virtio_hw *hw, uint16_t vec)
 {
-	rte_write16(vec, &hw->common_cfg->msix_config);
-	return rte_read16(&hw->common_cfg->msix_config);
+	virtio_pci_write16(vec, &hw->common_cfg->msix_config);
+	return virtio_pci_read16(&hw->common_cfg->msix_config);
 }
 
 static uint16_t
 modern_set_queue_irq(struct virtio_hw *hw, struct virtqueue *vq, uint16_t vec)
 {
-	rte_write16(vq->vq_queue_index, &hw->common_cfg->queue_select);
-	rte_write16(vec, &hw->common_cfg->queue_msix_vector);
-	return rte_read16(&hw->common_cfg->queue_msix_vector);
+	virtio_pci_write16(vq->vq_queue_index, &hw->common_cfg->queue_select);
+	virtio_pci_write16(vec, &hw->common_cfg->queue_msix_vector);
+	return virtio_pci_read16(&hw->common_cfg->queue_msix_vector);
 }
 
 static uint16_t
 modern_get_queue_num(struct virtio_hw *hw, uint16_t queue_id)
 {
-	rte_write16(queue_id, &hw->common_cfg->queue_select);
-	return rte_read16(&hw->common_cfg->queue_size);
+	virtio_pci_write16(queue_id, &hw->common_cfg->queue_select);
+	return virtio_pci_read16(&hw->common_cfg->queue_size);
 }
 
 static int
@@ -375,7 +423,7 @@ modern_setup_queue(struct virtio_hw *hw, struct virtqueue *vq)
 							 ring[vq->vq_nentries]),
 				   VIRTIO_PCI_VRING_ALIGN);
 
-	rte_write16(vq->vq_queue_index, &hw->common_cfg->queue_select);
+	virtio_pci_write16(vq->vq_queue_index, &hw->common_cfg->queue_select);
 
 	io_write64_twopart(desc_addr, &hw->common_cfg->queue_desc_lo,
 				      &hw->common_cfg->queue_desc_hi);
@@ -384,11 +432,11 @@ modern_setup_queue(struct virtio_hw *hw, struct virtqueue *vq)
 	io_write64_twopart(used_addr, &hw->common_cfg->queue_used_lo,
 				      &hw->common_cfg->queue_used_hi);
 
-	notify_off = rte_read16(&hw->common_cfg->queue_notify_off);
+	notify_off = virtio_pci_read16(&hw->common_cfg->queue_notify_off);
 	vq->notify_addr = (void *)((uint8_t *)hw->notify_base +
 				notify_off * hw->notify_off_multiplier);
 
-	rte_write16(1, &hw->common_cfg->queue_enable);
+	virtio_pci_write16(1, &hw->common_cfg->queue_enable);
 
 	PMD_INIT_LOG(DEBUG, "queue %u addresses:", vq->vq_queue_index);
 	PMD_INIT_LOG(DEBUG, "\t desc_addr: %" PRIx64, desc_addr);
@@ -403,7 +451,7 @@ modern_setup_queue(struct virtio_hw *hw, struct virtqueue *vq)
 static void
 modern_del_queue(struct virtio_hw *hw, struct virtqueue *vq)
 {
-	rte_write16(vq->vq_queue_index, &hw->common_cfg->queue_select);
+	virtio_pci_write16(vq->vq_queue_index, &hw->common_cfg->queue_select);
 
 	io_write64_twopart(0, &hw->common_cfg->queue_desc_lo,
 				  &hw->common_cfg->queue_desc_hi);
@@ -412,13 +460,13 @@ modern_del_queue(struct virtio_hw *hw, struct virtqueue *vq)
 	io_write64_twopart(0, &hw->common_cfg->queue_used_lo,
 				  &hw->common_cfg->queue_used_hi);
 
-	rte_write16(0, &hw->common_cfg->queue_enable);
+	virtio_pci_write16(0, &hw->common_cfg->queue_enable);
 }
 
 static void
 modern_notify_queue(struct virtio_hw *hw __rte_unused, struct virtqueue *vq)
 {
-	rte_write16(vq->vq_queue_index, vq->notify_addr);
+	virtio_pci_write16(vq->vq_queue_index, vq->notify_addr);
 }
 
 const struct virtio_pci_ops modern_ops = {
-- 
2.7.4


  parent reply	other threads:[~2019-12-20  3:10 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-22 15:27 [dpdk-dev] [PATCH v1 0/3] relax io barrier for aarch64 and use smp barriers for virtual pci memory Gavin Hu
2019-10-22 15:27 ` [dpdk-dev] [PATCH v1 1/3] eal/arm64: relax the io barrier for aarch64 Gavin Hu
2019-10-22 15:27 ` [dpdk-dev] [PATCH v1 2/3] net/virtio: virtual PCI requires smp barriers Gavin Hu
2019-10-22 15:27 ` [dpdk-dev] [PATCH v1 3/3] crypto/virtio: " Gavin Hu
2019-10-23  8:22 ` [dpdk-dev] [PATCH v1 0/3] relax io barrier for aarch64 and use smp barriers for virtual pci memory Maxime Coquelin
2019-11-07  1:13   ` Gavin Hu (Arm Technology China)
2019-12-20  3:09 ` [dpdk-dev] [PATCH v2 " Gavin Hu
2019-12-20  3:09 ` [dpdk-dev] [PATCH v2 1/3] eal/arm64: relax the io barrier for aarch64 Gavin Hu
2019-12-20  3:33   ` Jerin Jacob
2019-12-20  3:38     ` Jerin Jacob
2019-12-20  4:19       ` Gavin Hu
2019-12-20  4:34         ` Jerin Jacob
2019-12-20  6:32           ` Gavin Hu
2019-12-20  6:55             ` Jerin Jacob
2019-12-23  9:14               ` Gavin Hu
2019-12-23  9:19                 ` Jerin Jacob
2019-12-23 10:16                   ` Gavin Hu
2020-01-02  9:51                     ` Jerin Jacob
2020-01-03  6:30                       ` Gavin Hu
2020-01-03  7:34                         ` Jerin Jacob
2020-01-03  9:12                           ` Gavin Hu
2019-12-20  3:09 ` Gavin Hu [this message]
2019-12-20  8:17   ` [dpdk-dev] [PATCH v2 2/3] net/virtio: virtual PCI requires smp barriers Tiwei Bie
2019-12-20 10:19     ` Gavin Hu
2019-12-20  3:09 ` [dpdk-dev] [PATCH v2 3/3] crypto/virtio: " Gavin Hu
2020-02-08 13:48 ` [dpdk-dev] [PATCH v3] net/i40e: relaxed barrier in the tx fastpath Gavin Hu
2020-02-11  2:11   ` Ye Xiaolong
2020-02-12  6:02     ` Gavin Hu
2020-02-15  8:25   ` Jerin Jacob
2020-02-12  5:56 ` [dpdk-dev] [PATCH v4] " Gavin Hu
2020-02-15 15:16   ` Ye Xiaolong
2020-02-16  9:51     ` Thomas Monjalon
2020-02-16 16:38       ` Ye Xiaolong
2020-02-16 17:36         ` Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1576811391-19131-3-git-send-email-gavin.hu@arm.com \
    --to=gavin.hu@arm.com \
    --cc=Honnappa.Nagarahalli@arm.com \
    --cc=david.marchand@redhat.com \
    --cc=dev@dpdk.org \
    --cc=hemant.agrawal@nxp.com \
    --cc=jerinj@marvell.com \
    --cc=joyce.kong@arm.com \
    --cc=maxime.coquelin@redhat.com \
    --cc=nd@arm.com \
    --cc=pbhagavatula@marvell.com \
    --cc=phil.yang@arm.com \
    --cc=rasland@mellanox.com \
    --cc=ruifeng.wang@arm.com \
    --cc=steve.capper@arm.com \
    --cc=thomas@monjalon.net \
    --cc=tiwei.bie@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).