DPDK-dev Archive on lore.kernel.org
 help / color / Atom feed
From: Shreyansh Jain <shreyansh.jain@nxp.com>
To: ferruh.yigit@intel.com
Cc: dev@dpdk.org, hemant.agrawal@nxp.com, akhil.goyal@nxp.com,
	nipun.gupta@nxp.com, Shreyansh Jain <shreyansh.jain@nxp.com>
Subject: [PATCH 3/7] net/dpaa2: change into dynamic logging
Date: Mon, 12 Mar 2018 14:55:43 +0530
Message-ID: <20180312092547.18472-4-shreyansh.jain@nxp.com> (raw)
In-Reply-To: <20180312092547.18472-1-shreyansh.jain@nxp.com>

Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
---
 config/common_base                        |   5 -
 config/defconfig_arm64-dpaa2-linuxapp-gcc |   9 -
 doc/guides/nics/dpaa2.rst                 |  44 ++---
 drivers/net/dpaa2/Makefile                |   6 -
 drivers/net/dpaa2/base/dpaa2_hw_dpni.c    |  30 ++--
 drivers/net/dpaa2/dpaa2_ethdev.c          | 290 +++++++++++++++---------------
 drivers/net/dpaa2/dpaa2_pmd_logs.h        |  41 +++++
 drivers/net/dpaa2/dpaa2_rxtx.c            |  59 +++---
 8 files changed, 258 insertions(+), 226 deletions(-)
 create mode 100644 drivers/net/dpaa2/dpaa2_pmd_logs.h

diff --git a/config/common_base b/config/common_base
index ad03cf433..64bdfbb73 100644
--- a/config/common_base
+++ b/config/common_base
@@ -188,11 +188,6 @@ CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y
 # Compile burst-oriented NXP DPAA2 PMD driver
 #
 CONFIG_RTE_LIBRTE_DPAA2_PMD=n
-CONFIG_RTE_LIBRTE_DPAA2_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
-CONFIG_RTE_LIBRTE_DPAA2_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_DPAA2_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_DPAA2_DEBUG_TX_FREE=n
 
 #
 # Compile burst-oriented Amazon ENA PMD driver
diff --git a/config/defconfig_arm64-dpaa2-linuxapp-gcc b/config/defconfig_arm64-dpaa2-linuxapp-gcc
index afdbc347b..5647ec2e3 100644
--- a/config/defconfig_arm64-dpaa2-linuxapp-gcc
+++ b/config/defconfig_arm64-dpaa2-linuxapp-gcc
@@ -27,15 +27,6 @@ CONFIG_RTE_LIBRTE_VHOST_NUMA=n
 #
 CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=n
 
-#
-# Compile burst-oriented NXP DPAA2 PMD driver
-#
-CONFIG_RTE_LIBRTE_DPAA2_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
-CONFIG_RTE_LIBRTE_DPAA2_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_DPAA2_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_DPAA2_DEBUG_TX_FREE=n
-
 #
 # Compile NXP DPAA2 crypto sec driver for CAAM HW
 #
diff --git a/doc/guides/nics/dpaa2.rst b/doc/guides/nics/dpaa2.rst
index 9c66edd45..d9917bf5d 100644
--- a/doc/guides/nics/dpaa2.rst
+++ b/doc/guides/nics/dpaa2.rst
@@ -492,30 +492,10 @@ Please note that enabling debugging options may affect system performance.
   By default it is enabled only for defconfig_arm64-dpaa2-* config.
   Toggle compilation of the ``librte_pmd_dpaa2`` driver.
 
-- ``CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER`` (default ``n``)
-
-  Toggle display of generic debugging messages
-
 - ``CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA`` (default ``y``)
 
   Toggle to use physical address vs virtual address for hardware accelerators.
 
-- ``CONFIG_RTE_LIBRTE_DPAA2_DEBUG_INIT`` (default ``n``)
-
-  Toggle display of initialization related messages.
-
-- ``CONFIG_RTE_LIBRTE_DPAA2_DEBUG_RX`` (default ``n``)
-
-  Toggle display of receive fast path run-time message
-
-- ``CONFIG_RTE_LIBRTE_DPAA2_DEBUG_TX`` (default ``n``)
-
-  Toggle display of transmit fast path run-time message
-
-- ``CONFIG_RTE_LIBRTE_DPAA2_DEBUG_TX_FREE`` (default ``n``)
-
-  Toggle display of transmit fast path buffer free run-time message
-
 Driver compilation and testing
 ------------------------------
 
@@ -532,8 +512,7 @@ for details.
 
    .. code-block:: console
 
-      ./arm64-dpaa2-linuxapp-gcc/testpmd -c 0xff -n 1 \
-        -- -i --portmask=0x3 --nb-cores=1 --no-flush-rx
+      ./testpmd -c 0xff -n 1 -- -i --portmask=0x3 --nb-cores=1 --no-flush-rx
 
       .....
       EAL: Registered [pci] bus.
@@ -557,6 +536,27 @@ for details.
       Done
       testpmd>
 
+Enabling logs
+-------------
+
+For enabling logging for DPAA2 PMD, following log-level prefix can be used:
+
+ .. code-block:: console
+
+    <dpdk app> <EAL args> --log-level=bus.fslmc,<level> -- ...
+
+Using ``bus.fslmc`` as log matching criteria, all FSLMC bus logs can be enabled
+which are lower than logging ``level``.
+
+ Or
+
+ .. code-block:: console
+
+    <dpdk app> <EAL args> --log-level=pmd.dpaa2,<level> -- ...
+
+Using ``pmd.dpaa2`` as log matching criteria, all PMD logs can be enabled
+which are lower than logging ``level``.
+
 Limitations
 -----------
 
diff --git a/drivers/net/dpaa2/Makefile b/drivers/net/dpaa2/Makefile
index 068e9d362..1b707adaa 100644
--- a/drivers/net/dpaa2/Makefile
+++ b/drivers/net/dpaa2/Makefile
@@ -10,14 +10,8 @@ include $(RTE_SDK)/mk/rte.vars.mk
 #
 LIB = librte_pmd_dpaa2.a
 
-ifeq ($(CONFIG_RTE_LIBRTE_DPAA2_DEBUG_INIT),y)
-CFLAGS += -O0 -g
-CFLAGS += "-Wno-error"
-else
 CFLAGS += -O3
 CFLAGS += $(WERROR_FLAGS)
-endif
-
 CFLAGS += -I$(RTE_SDK)/drivers/net/dpaa2
 CFLAGS += -I$(RTE_SDK)/drivers/net/dpaa2/mc
 CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc
diff --git a/drivers/net/dpaa2/base/dpaa2_hw_dpni.c b/drivers/net/dpaa2/base/dpaa2_hw_dpni.c
index 4b60f5610..713a41bf3 100644
--- a/drivers/net/dpaa2/base/dpaa2_hw_dpni.c
+++ b/drivers/net/dpaa2/base/dpaa2_hw_dpni.c
@@ -17,7 +17,7 @@
 #include <rte_kvargs.h>
 #include <rte_dev.h>
 
-#include <fslmc_logs.h>
+#include <dpaa2_pmd_logs.h>
 #include <dpaa2_hw_pvt.h>
 #include <dpaa2_hw_mempool.h>
 
@@ -42,7 +42,7 @@ dpaa2_setup_flow_dist(struct rte_eth_dev *eth_dev,
 	p_params = rte_malloc(
 		NULL, DIST_PARAM_IOVA_SIZE, RTE_CACHE_LINE_SIZE);
 	if (!p_params) {
-		PMD_INIT_LOG(ERR, "Memory unavailable");
+		DPAA2_PMD_ERR("Unable to allocate flow-dist parameters");
 		return -ENOMEM;
 	}
 	memset(p_params, 0, DIST_PARAM_IOVA_SIZE);
@@ -50,8 +50,8 @@ dpaa2_setup_flow_dist(struct rte_eth_dev *eth_dev,
 
 	ret = dpaa2_distset_to_dpkg_profile_cfg(req_dist_set, &kg_cfg);
 	if (ret) {
-		PMD_INIT_LOG(ERR, "given rss_hf (%" PRIx64 ") not supported",
-			     req_dist_set);
+		DPAA2_PMD_ERR("Given RSS Hash (%" PRIx64 ") not supported",
+			      req_dist_set);
 		rte_free(p_params);
 		return ret;
 	}
@@ -61,7 +61,7 @@ dpaa2_setup_flow_dist(struct rte_eth_dev *eth_dev,
 
 	ret = dpkg_prepare_key_cfg(&kg_cfg, p_params);
 	if (ret) {
-		PMD_INIT_LOG(ERR, "Unable to prepare extract parameters");
+		DPAA2_PMD_ERR("Unable to prepare extract parameters");
 		rte_free(p_params);
 		return ret;
 	}
@@ -70,7 +70,7 @@ dpaa2_setup_flow_dist(struct rte_eth_dev *eth_dev,
 				  &tc_cfg);
 	rte_free(p_params);
 	if (ret) {
-		PMD_INIT_LOG(ERR,
+		DPAA2_PMD_ERR(
 			     "Setting distribution for Rx failed with err: %d",
 			     ret);
 		return ret;
@@ -93,7 +93,7 @@ int dpaa2_remove_flow_dist(
 	p_params = rte_malloc(
 		NULL, DIST_PARAM_IOVA_SIZE, RTE_CACHE_LINE_SIZE);
 	if (!p_params) {
-		PMD_INIT_LOG(ERR, "Memory unavailable");
+		DPAA2_PMD_ERR("Unable to allocate flow-dist parameters");
 		return -ENOMEM;
 	}
 	memset(p_params, 0, DIST_PARAM_IOVA_SIZE);
@@ -105,7 +105,7 @@ int dpaa2_remove_flow_dist(
 
 	ret = dpkg_prepare_key_cfg(&kg_cfg, p_params);
 	if (ret) {
-		PMD_INIT_LOG(ERR, "Unable to prepare extract parameters");
+		DPAA2_PMD_ERR("Unable to prepare extract parameters");
 		rte_free(p_params);
 		return ret;
 	}
@@ -114,8 +114,8 @@ int dpaa2_remove_flow_dist(
 				  &tc_cfg);
 	rte_free(p_params);
 	if (ret)
-		PMD_INIT_LOG(ERR,
-			     "Setting distribution for Rx failed with err:%d",
+		DPAA2_PMD_ERR(
+			     "Setting distribution for Rx failed with err: %d",
 			     ret);
 	return ret;
 }
@@ -256,7 +256,7 @@ dpaa2_distset_to_dpkg_profile_cfg(
 				break;
 
 			default:
-				PMD_INIT_LOG(WARNING,
+				DPAA2_PMD_WARN(
 					     "Unsupported flow dist option %x",
 					     dist_field);
 				return -EINVAL;
@@ -307,7 +307,7 @@ dpaa2_attach_bp_list(struct dpaa2_dev_priv *priv,
 	retcode = dpni_set_buffer_layout(dpni, CMD_PRI_LOW, priv->token,
 					 DPNI_QUEUE_RX, &layout);
 	if (retcode) {
-		PMD_INIT_LOG(ERR, "Err(%d) in setting rx buffer layout\n",
+		DPAA2_PMD_ERR("Error configuring buffer pool Rx layout (%d)",
 			     retcode);
 		return retcode;
 	}
@@ -322,9 +322,9 @@ dpaa2_attach_bp_list(struct dpaa2_dev_priv *priv,
 
 	retcode = dpni_set_pools(dpni, CMD_PRI_LOW, priv->token, &bpool_cfg);
 	if (retcode != 0) {
-		PMD_INIT_LOG(ERR, "Error in attaching the buffer pool list"
-				" bpid = %d Error code = %d\n",
-				bpool_cfg.pools[0].dpbp_id, retcode);
+		DPAA2_PMD_ERR("Error configuring buffer pool on interface."
+			      " bpid = %d error code = %d",
+			      bpool_cfg.pools[0].dpbp_id, retcode);
 		return retcode;
 	}
 
diff --git a/drivers/net/dpaa2/dpaa2_ethdev.c b/drivers/net/dpaa2/dpaa2_ethdev.c
index fd5897e54..08109da41 100644
--- a/drivers/net/dpaa2/dpaa2_ethdev.c
+++ b/drivers/net/dpaa2/dpaa2_ethdev.c
@@ -18,7 +18,7 @@
 #include <rte_dev.h>
 #include <rte_fslmc.h>
 
-#include <fslmc_logs.h>
+#include "dpaa2_pmd_logs.h"
 #include <fslmc_vfio.h>
 #include <dpaa2_hw_pvt.h>
 #include <dpaa2_hw_mempool.h>
@@ -57,6 +57,8 @@ static int dpaa2_dev_set_link_up(struct rte_eth_dev *dev);
 static int dpaa2_dev_set_link_down(struct rte_eth_dev *dev);
 static int dpaa2_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu);
 
+int dpaa2_logtype_pmd;
+
 /**
  * Atomically reads the link status information from global
  * structure rte_eth_dev.
@@ -76,6 +78,8 @@ dpaa2_dev_atomic_read_link_status(struct rte_eth_dev *dev,
 	struct rte_eth_link *dst = link;
 	struct rte_eth_link *src = &dev->data->dev_link;
 
+	PMD_INIT_FUNC_TRACE();
+
 	if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
 				*(uint64_t *)src) == 0)
 		return -1;
@@ -102,6 +106,8 @@ dpaa2_dev_atomic_write_link_status(struct rte_eth_dev *dev,
 	struct rte_eth_link *dst = &dev->data->dev_link;
 	struct rte_eth_link *src = link;
 
+	PMD_INIT_FUNC_TRACE();
+
 	if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
 				*(uint64_t *)src) == 0)
 		return -1;
@@ -119,7 +125,7 @@ dpaa2_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
 	PMD_INIT_FUNC_TRACE();
 
 	if (dpni == NULL) {
-		RTE_LOG(ERR, PMD, "dpni is NULL\n");
+		DPAA2_PMD_ERR("dpni is NULL");
 		return -1;
 	}
 
@@ -131,7 +137,7 @@ dpaa2_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
 					  priv->token, vlan_id);
 
 	if (ret < 0)
-		PMD_DRV_LOG(ERR, "ret = %d Unable to add/rem vlan %d hwid =%d",
+		DPAA2_PMD_ERR("ret = %d Unable to add/rem vlan %d hwid =%d",
 			    ret, vlan_id, priv->hw_id);
 
 	return ret;
@@ -149,7 +155,7 @@ dpaa2_vlan_offload_set(struct rte_eth_dev *dev, int mask)
 	if (mask & ETH_VLAN_FILTER_MASK) {
 		/* VLAN Filter not avaialble */
 		if (!priv->max_vlan_filters) {
-			RTE_LOG(INFO, PMD, "VLAN filter not available\n");
+			DPAA2_PMD_INFO("VLAN filter not available");
 			goto next_mask;
 		}
 
@@ -160,14 +166,13 @@ dpaa2_vlan_offload_set(struct rte_eth_dev *dev, int mask)
 			ret = dpni_enable_vlan_filter(dpni, CMD_PRI_LOW,
 						      priv->token, false);
 		if (ret < 0)
-			RTE_LOG(ERR, PMD, "Unable to set vlan filter = %d\n",
+			DPAA2_PMD_INFO("Unable to set vlan filter = %d",
 				ret);
 	}
 next_mask:
 	if (mask & ETH_VLAN_EXTEND_MASK) {
 		if (dev->data->dev_conf.rxmode.hw_vlan_extend)
-			RTE_LOG(INFO, PMD,
-				"VLAN extend offload not supported\n");
+			DPAA2_PMD_INFO("VLAN extend offload not supported");
 	}
 
 	return 0;
@@ -187,10 +192,10 @@ dpaa2_fw_version_get(struct rte_eth_dev *dev,
 	PMD_INIT_FUNC_TRACE();
 
 	if (mc_get_soc_version(dpni, CMD_PRI_LOW, &mc_plat_info))
-		RTE_LOG(WARNING, PMD, "\tmc_get_soc_version failed\n");
+		DPAA2_PMD_WARN("\tmc_get_soc_version failed");
 
 	if (mc_get_version(dpni, CMD_PRI_LOW, &mc_ver_info))
-		RTE_LOG(WARNING, PMD, "\tmc_get_version failed\n");
+		DPAA2_PMD_WARN("\tmc_get_version failed");
 
 	ret = snprintf(fw_version, fw_size,
 		       "%x-%d.%d.%d",
@@ -253,7 +258,7 @@ dpaa2_alloc_rx_tx_queues(struct rte_eth_dev *dev)
 	mc_q = rte_malloc(NULL, sizeof(struct dpaa2_queue) * tot_queues,
 			  RTE_CACHE_LINE_SIZE);
 	if (!mc_q) {
-		PMD_INIT_LOG(ERR, "malloc failed for rx/tx queues\n");
+		DPAA2_PMD_ERR("Memory allocation failed for rx/tx queues");
 		return -1;
 	}
 
@@ -330,8 +335,8 @@ dpaa2_eth_dev_configure(struct rte_eth_dev *dev)
 			ret = dpni_set_max_frame_length(dpni, CMD_PRI_LOW,
 				priv->token, eth_conf->rxmode.max_rx_pkt_len);
 			if (ret) {
-				PMD_INIT_LOG(ERR,
-					     "unable to set mtu. check config\n");
+				DPAA2_PMD_ERR(
+					"Unable to set mtu. check config");
 				return ret;
 			}
 		} else {
@@ -343,8 +348,8 @@ dpaa2_eth_dev_configure(struct rte_eth_dev *dev)
 		ret = dpaa2_setup_flow_dist(dev,
 				eth_conf->rx_adv_conf.rss_conf.rss_hf);
 		if (ret) {
-			PMD_INIT_LOG(ERR, "unable to set flow distribution."
-				     "please check queue config\n");
+			DPAA2_PMD_ERR("Unable to set flow distribution."
+				      "Check queue config");
 			return ret;
 		}
 	}
@@ -355,28 +360,28 @@ dpaa2_eth_dev_configure(struct rte_eth_dev *dev)
 	ret = dpni_set_offload(dpni, CMD_PRI_LOW, priv->token,
 			       DPNI_OFF_RX_L3_CSUM, rx_ip_csum_offload);
 	if (ret) {
-		PMD_INIT_LOG(ERR, "Error to set RX l3 csum:Error = %d\n", ret);
+		DPAA2_PMD_ERR("Error to set RX l3 csum:Error = %d", ret);
 		return ret;
 	}
 
 	ret = dpni_set_offload(dpni, CMD_PRI_LOW, priv->token,
 			       DPNI_OFF_RX_L4_CSUM, rx_ip_csum_offload);
 	if (ret) {
-		PMD_INIT_LOG(ERR, "Error to get RX l4 csum:Error = %d\n", ret);
+		DPAA2_PMD_ERR("Error to get RX l4 csum:Error = %d", ret);
 		return ret;
 	}
 
 	ret = dpni_set_offload(dpni, CMD_PRI_LOW, priv->token,
 			       DPNI_OFF_TX_L3_CSUM, true);
 	if (ret) {
-		PMD_INIT_LOG(ERR, "Error to set TX l3 csum:Error = %d\n", ret);
+		DPAA2_PMD_ERR("Error to set TX l3 csum:Error = %d", ret);
 		return ret;
 	}
 
 	ret = dpni_set_offload(dpni, CMD_PRI_LOW, priv->token,
 			       DPNI_OFF_TX_L4_CSUM, true);
 	if (ret) {
-		PMD_INIT_LOG(ERR, "Error to get TX l4 csum:Error = %d\n", ret);
+		DPAA2_PMD_ERR("Error to get TX l4 csum:Error = %d", ret);
 		return ret;
 	}
 
@@ -390,8 +395,7 @@ dpaa2_eth_dev_configure(struct rte_eth_dev *dev)
 		ret = dpni_set_offload(dpni, CMD_PRI_LOW, priv->token,
 				       DPNI_FLCTYPE_HASH, true);
 		if (ret) {
-			PMD_INIT_LOG(ERR, "Error setting FLCTYPE: Err = %d\n",
-				     ret);
+			DPAA2_PMD_ERR("Error setting FLCTYPE: Err = %d", ret);
 			return ret;
 		}
 	}
@@ -427,8 +431,8 @@ dpaa2_dev_rx_queue_setup(struct rte_eth_dev *dev,
 
 	PMD_INIT_FUNC_TRACE();
 
-	PMD_DRV_LOG(DEBUG, "dev =%p, queue =%d, pool = %p, conf =%p",
-		    dev, rx_queue_id, mb_pool, rx_conf);
+	DPAA2_PMD_DEBUG("dev =%p, queue =%d, pool = %p, conf =%p",
+			dev, rx_queue_id, mb_pool, rx_conf);
 
 	if (!priv->bp_list || priv->bp_list->mp != mb_pool) {
 		bpid = mempool_to_bpid(mb_pool);
@@ -467,7 +471,7 @@ dpaa2_dev_rx_queue_setup(struct rte_eth_dev *dev,
 	ret = dpni_set_queue(dpni, CMD_PRI_LOW, priv->token, DPNI_QUEUE_RX,
 			     dpaa2_q->tc_index, flow_id, options, &cfg);
 	if (ret) {
-		PMD_INIT_LOG(ERR, "Error in setting the rx flow: = %d\n", ret);
+		DPAA2_PMD_ERR("Error in setting the rx flow: = %d", ret);
 		return -1;
 	}
 
@@ -479,14 +483,14 @@ dpaa2_dev_rx_queue_setup(struct rte_eth_dev *dev,
 		taildrop.threshold = CONG_THRESHOLD_RX_Q;
 		taildrop.units = DPNI_CONGESTION_UNIT_BYTES;
 		taildrop.oal = CONG_RX_OAL;
-		PMD_DRV_LOG(DEBUG, "Enabling Early Drop on queue = %d",
+		DPAA2_PMD_DEBUG("Enabling Early Drop on queue = %d",
 			    rx_queue_id);
 		ret = dpni_set_taildrop(dpni, CMD_PRI_LOW, priv->token,
 					DPNI_CP_QUEUE, DPNI_QUEUE_RX,
 					dpaa2_q->tc_index, flow_id, &taildrop);
 		if (ret) {
-			PMD_INIT_LOG(ERR, "Error in setting the rx flow"
-				     " err : = %d\n", ret);
+			DPAA2_PMD_ERR("Error in setting taildrop. err=(%d)",
+				      ret);
 			return -1;
 		}
 	}
@@ -529,9 +533,9 @@ dpaa2_dev_tx_queue_setup(struct rte_eth_dev *dev,
 	ret = dpni_set_queue(dpni, CMD_PRI_LOW, priv->token, DPNI_QUEUE_TX,
 			     tc_id, flow_id, options, &tx_flow_cfg);
 	if (ret) {
-		PMD_INIT_LOG(ERR, "Error in setting the tx flow: "
-			     "tc_id=%d, flow =%d ErrorCode = %x\n",
-			     tc_id, flow_id, -ret);
+		DPAA2_PMD_ERR("Error in setting the tx flow: "
+			      "tc_id=%d, flow=%d err=%d",
+			      tc_id, flow_id, ret);
 			return -1;
 	}
 
@@ -543,8 +547,8 @@ dpaa2_dev_tx_queue_setup(struct rte_eth_dev *dev,
 						    priv->token,
 						    DPNI_CONF_DISABLE);
 		if (ret) {
-			PMD_INIT_LOG(ERR, "Error in set tx conf mode settings"
-				     " ErrorCode = %x", ret);
+			DPAA2_PMD_ERR("Error in set tx conf mode settings: "
+				      "err=%d", ret);
 			return -1;
 		}
 	}
@@ -573,9 +577,9 @@ dpaa2_dev_tx_queue_setup(struct rte_eth_dev *dev,
 						       tc_id,
 						       &cong_notif_cfg);
 		if (ret) {
-			PMD_INIT_LOG(ERR,
-			   "Error in setting tx congestion notification: = %d",
-			   -ret);
+			DPAA2_PMD_ERR(
+			   "Error in setting tx congestion notification: "
+			   "err=%d", ret);
 			return -ret;
 		}
 	}
@@ -610,7 +614,7 @@ dpaa2_dev_rx_queue_count(struct rte_eth_dev *dev, uint16_t rx_queue_id)
 	if (unlikely(!DPAA2_PER_LCORE_DPIO)) {
 		ret = dpaa2_affine_qbman_swp();
 		if (ret) {
-			RTE_LOG(ERR, PMD, "Failure in affining portal\n");
+			DPAA2_PMD_ERR("Failure in affining portal");
 			return -EINVAL;
 		}
 	}
@@ -620,7 +624,7 @@ dpaa2_dev_rx_queue_count(struct rte_eth_dev *dev, uint16_t rx_queue_id)
 
 	if (qbman_fq_query_state(swp, dpaa2_q->fqid, &state) == 0) {
 		frame_cnt = qbman_fq_state_frame_count(&state);
-		RTE_LOG(DEBUG, PMD, "RX frame count for q(%d) is %u\n",
+		DPAA2_PMD_DEBUG("RX frame count for q(%d) is %u",
 			rx_queue_id, frame_cnt);
 	}
 	return frame_cnt;
@@ -670,14 +674,14 @@ dpaa2_interrupt_handler(void *param)
 	PMD_INIT_FUNC_TRACE();
 
 	if (dpni == NULL) {
-		RTE_LOG(ERR, PMD, "dpni is NULL");
+		DPAA2_PMD_ERR("dpni is NULL");
 		return;
 	}
 
 	ret = dpni_get_irq_status(dpni, CMD_PRI_LOW, priv->token,
 				  irq_index, &status);
 	if (unlikely(ret)) {
-		RTE_LOG(ERR, PMD, "Can't get irq status (err %d)", ret);
+		DPAA2_PMD_ERR("Can't get irq status (err %d)", ret);
 		clear = 0xffffffff;
 		goto out;
 	}
@@ -693,7 +697,7 @@ dpaa2_interrupt_handler(void *param)
 	ret = dpni_clear_irq_status(dpni, CMD_PRI_LOW, priv->token,
 				    irq_index, clear);
 	if (unlikely(ret))
-		RTE_LOG(ERR, PMD, "Can't clear irq status (err %d)", ret);
+		DPAA2_PMD_ERR("Can't clear irq status (err %d)", ret);
 }
 
 static int
@@ -710,16 +714,16 @@ dpaa2_eth_setup_irqs(struct rte_eth_dev *dev, int enable)
 	err = dpni_set_irq_mask(dpni, CMD_PRI_LOW, priv->token,
 				irq_index, mask);
 	if (err < 0) {
-		PMD_INIT_LOG(ERR, "Error: dpni_set_irq_mask():%d (%s)", err,
-			     strerror(-err));
+		DPAA2_PMD_ERR("Error: dpni_set_irq_mask():%d (%s)", err,
+			      strerror(-err));
 		return err;
 	}
 
 	err = dpni_set_irq_enable(dpni, CMD_PRI_LOW, priv->token,
 				  irq_index, enable);
 	if (err < 0)
-		PMD_INIT_LOG(ERR, "Error: dpni_set_irq_enable():%d (%s)", err,
-			     strerror(-err));
+		DPAA2_PMD_ERR("Error: dpni_set_irq_enable():%d (%s)", err,
+			      strerror(-err));
 
 	return err;
 }
@@ -747,8 +751,8 @@ dpaa2_dev_start(struct rte_eth_dev *dev)
 
 	ret = dpni_enable(dpni, CMD_PRI_LOW, priv->token);
 	if (ret) {
-		PMD_INIT_LOG(ERR, "Failure %d in enabling dpni %d device\n",
-			     ret, priv->hw_id);
+		DPAA2_PMD_ERR("Failure in enabling dpni %d device: err=%d",
+			      priv->hw_id, ret);
 		return ret;
 	}
 
@@ -758,7 +762,7 @@ dpaa2_dev_start(struct rte_eth_dev *dev)
 	ret = dpni_get_qdid(dpni, CMD_PRI_LOW, priv->token,
 			    DPNI_QUEUE_TX, &qdid);
 	if (ret) {
-		PMD_INIT_LOG(ERR, "Error to get qdid:ErrorCode = %d\n", ret);
+		DPAA2_PMD_ERR("Error in getting qdid: err=%d", ret);
 		return ret;
 	}
 	priv->qdid = qdid;
@@ -769,8 +773,8 @@ dpaa2_dev_start(struct rte_eth_dev *dev)
 				     DPNI_QUEUE_RX, dpaa2_q->tc_index,
 				       dpaa2_q->flow_id, &cfg, &qid);
 		if (ret) {
-			PMD_INIT_LOG(ERR, "Error to get flow "
-				     "information Error code = %d\n", ret);
+			DPAA2_PMD_ERR("Error in getting flow information: "
+				      "err=%d", ret);
 			return ret;
 		}
 		dpaa2_q->fqid = qid.fqid;
@@ -785,8 +789,8 @@ dpaa2_dev_start(struct rte_eth_dev *dev)
 	ret = dpni_set_errors_behavior(dpni, CMD_PRI_LOW,
 				       priv->token, &err_cfg);
 	if (ret) {
-		PMD_INIT_LOG(ERR, "Error to dpni_set_errors_behavior:"
-			     "code = %d\n", ret);
+		DPAA2_PMD_ERR("Error to dpni_set_errors_behavior: code = %d",
+			      ret);
 		return ret;
 	}
 
@@ -845,8 +849,8 @@ dpaa2_dev_stop(struct rte_eth_dev *dev)
 
 	ret = dpni_disable(dpni, CMD_PRI_LOW, priv->token);
 	if (ret) {
-		PMD_INIT_LOG(ERR, "Failure (ret %d) in disabling dpni %d dev\n",
-			     ret, priv->hw_id);
+		DPAA2_PMD_ERR("Failure (ret %d) in disabling dpni %d dev",
+			      ret, priv->hw_id);
 		return;
 	}
 
@@ -878,8 +882,8 @@ dpaa2_dev_close(struct rte_eth_dev *dev)
 	/* Clean the device first */
 	ret = dpni_reset(dpni, CMD_PRI_LOW, priv->token);
 	if (ret) {
-		PMD_INIT_LOG(ERR, "Failure cleaning dpni device with"
-			     " error code %d\n", ret);
+		DPAA2_PMD_ERR("Failure cleaning dpni device: "
+			      "err=%d", ret);
 		return;
 	}
 
@@ -898,17 +902,17 @@ dpaa2_dev_promiscuous_enable(
 	PMD_INIT_FUNC_TRACE();
 
 	if (dpni == NULL) {
-		RTE_LOG(ERR, PMD, "dpni is NULL\n");
+		DPAA2_PMD_ERR("dpni is NULL");
 		return;
 	}
 
 	ret = dpni_set_unicast_promisc(dpni, CMD_PRI_LOW, priv->token, true);
 	if (ret < 0)
-		RTE_LOG(ERR, PMD, "Unable to enable U promisc mode %d\n", ret);
+		DPAA2_PMD_ERR("Unable to enable U promisc mode %d", ret);
 
 	ret = dpni_set_multicast_promisc(dpni, CMD_PRI_LOW, priv->token, true);
 	if (ret < 0)
-		RTE_LOG(ERR, PMD, "Unable to enable M promisc mode %d\n", ret);
+		DPAA2_PMD_ERR("Unable to enable M promisc mode %d", ret);
 }
 
 static void
@@ -922,21 +926,20 @@ dpaa2_dev_promiscuous_disable(
 	PMD_INIT_FUNC_TRACE();
 
 	if (dpni == NULL) {
-		RTE_LOG(ERR, PMD, "dpni is NULL\n");
+		DPAA2_PMD_ERR("dpni is NULL");
 		return;
 	}
 
 	ret = dpni_set_unicast_promisc(dpni, CMD_PRI_LOW, priv->token, false);
 	if (ret < 0)
-		RTE_LOG(ERR, PMD, "Unable to disable U promisc mode %d\n", ret);
+		DPAA2_PMD_ERR("Unable to disable U promisc mode %d", ret);
 
 	if (dev->data->all_multicast == 0) {
 		ret = dpni_set_multicast_promisc(dpni, CMD_PRI_LOW,
 						 priv->token, false);
 		if (ret < 0)
-			RTE_LOG(ERR, PMD,
-				"Unable to disable M promisc mode %d\n",
-				ret);
+			DPAA2_PMD_ERR("Unable to disable M promisc mode %d",
+				      ret);
 	}
 }
 
@@ -951,13 +954,13 @@ dpaa2_dev_allmulticast_enable(
 	PMD_INIT_FUNC_TRACE();
 
 	if (dpni == NULL) {
-		RTE_LOG(ERR, PMD, "dpni is NULL\n");
+		DPAA2_PMD_ERR("dpni is NULL");
 		return;
 	}
 
 	ret = dpni_set_multicast_promisc(dpni, CMD_PRI_LOW, priv->token, true);
 	if (ret < 0)
-		RTE_LOG(ERR, PMD, "Unable to enable multicast mode %d\n", ret);
+		DPAA2_PMD_ERR("Unable to enable multicast mode %d", ret);
 }
 
 static void
@@ -970,7 +973,7 @@ dpaa2_dev_allmulticast_disable(struct rte_eth_dev *dev)
 	PMD_INIT_FUNC_TRACE();
 
 	if (dpni == NULL) {
-		RTE_LOG(ERR, PMD, "dpni is NULL\n");
+		DPAA2_PMD_ERR("dpni is NULL");
 		return;
 	}
 
@@ -980,7 +983,7 @@ dpaa2_dev_allmulticast_disable(struct rte_eth_dev *dev)
 
 	ret = dpni_set_multicast_promisc(dpni, CMD_PRI_LOW, priv->token, false);
 	if (ret < 0)
-		RTE_LOG(ERR, PMD, "Unable to disable multicast mode %d\n", ret);
+		DPAA2_PMD_ERR("Unable to disable multicast mode %d", ret);
 }
 
 static int
@@ -995,7 +998,7 @@ dpaa2_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
 	PMD_INIT_FUNC_TRACE();
 
 	if (dpni == NULL) {
-		RTE_LOG(ERR, PMD, "dpni is NULL\n");
+		DPAA2_PMD_ERR("dpni is NULL");
 		return -EINVAL;
 	}
 
@@ -1016,10 +1019,10 @@ dpaa2_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
 	ret = dpni_set_max_frame_length(dpni, CMD_PRI_LOW, priv->token,
 					frame_size);
 	if (ret) {
-		PMD_DRV_LOG(ERR, "setting the max frame length failed");
+		DPAA2_PMD_ERR("Setting the max frame length failed");
 		return -1;
 	}
-	PMD_DRV_LOG(INFO, "MTU is configured %d for the device", mtu);
+	DPAA2_PMD_INFO("MTU configured for the device: %d", mtu);
 	return 0;
 }
 
@@ -1036,15 +1039,15 @@ dpaa2_dev_add_mac_addr(struct rte_eth_dev *dev,
 	PMD_INIT_FUNC_TRACE();
 
 	if (dpni == NULL) {
-		RTE_LOG(ERR, PMD, "dpni is NULL\n");
+		DPAA2_PMD_ERR("dpni is NULL");
 		return -1;
 	}
 
 	ret = dpni_add_mac_addr(dpni, CMD_PRI_LOW,
 				priv->token, addr->addr_bytes);
 	if (ret)
-		RTE_LOG(ERR, PMD,
-			"error: Adding the MAC ADDR failed: err = %d\n", ret);
+		DPAA2_PMD_ERR(
+			"error: Adding the MAC ADDR failed: err = %d", ret);
 	return 0;
 }
 
@@ -1063,15 +1066,15 @@ dpaa2_dev_remove_mac_addr(struct rte_eth_dev *dev,
 	macaddr = &data->mac_addrs[index];
 
 	if (dpni == NULL) {
-		RTE_LOG(ERR, PMD, "dpni is NULL\n");
+		DPAA2_PMD_ERR("dpni is NULL");
 		return;
 	}
 
 	ret = dpni_remove_mac_addr(dpni, CMD_PRI_LOW,
 				   priv->token, macaddr->addr_bytes);
 	if (ret)
-		RTE_LOG(ERR, PMD,
-			"error: Removing the MAC ADDR failed: err = %d\n", ret);
+		DPAA2_PMD_ERR(
+			"error: Removing the MAC ADDR failed: err = %d", ret);
 }
 
 static void
@@ -1085,7 +1088,7 @@ dpaa2_dev_set_mac_addr(struct rte_eth_dev *dev,
 	PMD_INIT_FUNC_TRACE();
 
 	if (dpni == NULL) {
-		RTE_LOG(ERR, PMD, "dpni is NULL\n");
+		DPAA2_PMD_ERR("dpni is NULL");
 		return;
 	}
 
@@ -1093,8 +1096,8 @@ dpaa2_dev_set_mac_addr(struct rte_eth_dev *dev,
 					priv->token, addr->addr_bytes);
 
 	if (ret)
-		RTE_LOG(ERR, PMD,
-			"error: Setting the MAC ADDR failed %d\n", ret);
+		DPAA2_PMD_ERR(
+			"error: Setting the MAC ADDR failed %d", ret);
 }
 static
 int dpaa2_dev_stats_get(struct rte_eth_dev *dev,
@@ -1111,12 +1114,12 @@ int dpaa2_dev_stats_get(struct rte_eth_dev *dev,
 	PMD_INIT_FUNC_TRACE();
 
 	if (!dpni) {
-		RTE_LOG(ERR, PMD, "dpni is NULL\n");
+		DPAA2_PMD_ERR("dpni is NULL");
 		return -EINVAL;
 	}
 
 	if (!stats) {
-		RTE_LOG(ERR, PMD, "stats is NULL\n");
+		DPAA2_PMD_ERR("stats is NULL");
 		return -EINVAL;
 	}
 
@@ -1155,7 +1158,7 @@ int dpaa2_dev_stats_get(struct rte_eth_dev *dev,
 	return 0;
 
 err:
-	RTE_LOG(ERR, PMD, "Operation not completed:Error Code = %d\n", retcode);
+	DPAA2_PMD_ERR("Operation not completed:Error Code = %d", retcode);
 	return retcode;
 };
 
@@ -1200,7 +1203,7 @@ dpaa2_dev_xstats_get(struct rte_eth_dev *dev, struct rte_eth_xstat *xstats,
 	}
 	return i;
 err:
-	RTE_LOG(ERR, PMD, "Error in obtaining extended stats (%d)\n", retcode);
+	DPAA2_PMD_ERR("Error in obtaining extended stats (%d)", retcode);
 	return retcode;
 }
 
@@ -1269,7 +1272,7 @@ dpaa2_xstats_get_by_id(struct rte_eth_dev *dev, const uint64_t *ids,
 
 	for (i = 0; i < n; i++) {
 		if (ids[i] >= stat_cnt) {
-			PMD_INIT_LOG(ERR, "id value isn't valid");
+			DPAA2_PMD_ERR("xstats id value isn't valid");
 			return -1;
 		}
 		values[i] = values_copy[ids[i]];
@@ -1294,7 +1297,7 @@ dpaa2_xstats_get_names_by_id(
 
 	for (i = 0; i < limit; i++) {
 		if (ids[i] >= stat_cnt) {
-			PMD_INIT_LOG(ERR, "id value isn't valid");
+			DPAA2_PMD_ERR("xstats id value isn't valid");
 			return -1;
 		}
 		strcpy(xstats_names[i].name, xstats_names_copy[ids[i]].name);
@@ -1312,7 +1315,7 @@ dpaa2_dev_stats_reset(struct rte_eth_dev *dev)
 	PMD_INIT_FUNC_TRACE();
 
 	if (dpni == NULL) {
-		RTE_LOG(ERR, PMD, "dpni is NULL\n");
+		DPAA2_PMD_ERR("dpni is NULL");
 		return;
 	}
 
@@ -1323,7 +1326,7 @@ dpaa2_dev_stats_reset(struct rte_eth_dev *dev)
 	return;
 
 error:
-	RTE_LOG(ERR, PMD, "Operation not completed:Error Code = %d\n", retcode);
+	DPAA2_PMD_ERR("Operation not completed:Error Code = %d", retcode);
 	return;
 };
 
@@ -1339,7 +1342,7 @@ dpaa2_dev_link_update(struct rte_eth_dev *dev,
 	struct dpni_link_state state = {0};
 
 	if (dpni == NULL) {
-		RTE_LOG(ERR, PMD, "dpni is NULL\n");
+		DPAA2_PMD_ERR("dpni is NULL");
 		return 0;
 	}
 	memset(&old, 0, sizeof(old));
@@ -1347,12 +1350,12 @@ dpaa2_dev_link_update(struct rte_eth_dev *dev,
 
 	ret = dpni_get_link_state(dpni, CMD_PRI_LOW, priv->token, &state);
 	if (ret < 0) {
-		RTE_LOG(ERR, PMD, "error: dpni_get_link_state %d\n", ret);
+		DPAA2_PMD_ERR("error: dpni_get_link_state %d", ret);
 		return -1;
 	}
 
 	if ((old.link_status == state.up) && (old.link_speed == state.rate)) {
-		RTE_LOG(DEBUG, PMD, "No change in status\n");
+		DPAA2_PMD_DEBUG("No change in status");
 		return -1;
 	}
 
@@ -1368,9 +1371,9 @@ dpaa2_dev_link_update(struct rte_eth_dev *dev,
 	dpaa2_dev_atomic_write_link_status(dev, &link);
 
 	if (link.link_status)
-		PMD_DRV_LOG(INFO, "Port %d Link is Up\n", dev->data->port_id);
+		DPAA2_PMD_INFO("Port %d Link is Up", dev->data->port_id);
 	else
-		PMD_DRV_LOG(INFO, "Port %d Link is Down", dev->data->port_id);
+		DPAA2_PMD_INFO("Port %d Link is Down", dev->data->port_id);
 	return 0;
 }
 
@@ -1391,7 +1394,7 @@ dpaa2_dev_set_link_up(struct rte_eth_dev *dev)
 	dpni = (struct fsl_mc_io *)priv->hw;
 
 	if (dpni == NULL) {
-		RTE_LOG(ERR, PMD, "DPNI is NULL\n");
+		DPAA2_PMD_ERR("dpni is NULL");
 		return ret;
 	}
 
@@ -1399,7 +1402,7 @@ dpaa2_dev_set_link_up(struct rte_eth_dev *dev)
 	ret = dpni_is_enabled(dpni, CMD_PRI_LOW, priv->token, &en);
 	if (ret) {
 		/* Unable to obtain dpni status; Not continuing */
-		PMD_DRV_LOG(ERR, "Interface Link UP failed (%d)", ret);
+		DPAA2_PMD_ERR("Interface Link Up failed (%d)", ret);
 		return -EINVAL;
 	}
 
@@ -1407,13 +1410,13 @@ dpaa2_dev_set_link_up(struct rte_eth_dev *dev)
 	if (!en) {
 		ret = dpni_enable(dpni, CMD_PRI_LOW, priv->token);
 		if (ret) {
-			PMD_DRV_LOG(ERR, "Interface Link UP failed (%d)", ret);
+			DPAA2_PMD_ERR("Interface Link Up failed (%d)", ret);
 			return -EINVAL;
 		}
 	}
 	ret = dpni_get_link_state(dpni, CMD_PRI_LOW, priv->token, &state);
 	if (ret < 0) {
-		RTE_LOG(ERR, PMD, "error: dpni_get_link_state %d\n", ret);
+		DPAA2_PMD_ERR("error: dpni_get_link_state %d", ret);
 		return -1;
 	}
 
@@ -1422,10 +1425,10 @@ dpaa2_dev_set_link_up(struct rte_eth_dev *dev)
 	dev->data->dev_link.link_status = state.up;
 
 	if (state.up)
-		PMD_DRV_LOG(INFO, "Port %d Link is set as UP",
+		DPAA2_PMD_INFO("Port %d Link is Up",
 			    dev->data->port_id);
 	else
-		PMD_DRV_LOG(INFO, "Port %d Link is DOWN", dev->data->port_id);
+		DPAA2_PMD_INFO("Port %d Link is Down", dev->data->port_id);
 	return ret;
 }
 
@@ -1448,7 +1451,7 @@ dpaa2_dev_set_link_down(struct rte_eth_dev *dev)
 	dpni = (struct fsl_mc_io *)priv->hw;
 
 	if (dpni == NULL) {
-		RTE_LOG(ERR, PMD, "Device has not yet been configured\n");
+		DPAA2_PMD_ERR("Device has not yet been configured");
 		return ret;
 	}
 
@@ -1461,12 +1464,12 @@ dpaa2_dev_set_link_down(struct rte_eth_dev *dev)
 	do {
 		ret = dpni_disable(dpni, 0, priv->token);
 		if (ret) {
-			PMD_DRV_LOG(ERR, "dpni disable failed (%d)", ret);
+			DPAA2_PMD_ERR("dpni disable failed (%d)", ret);
 			return ret;
 		}
 		ret = dpni_is_enabled(dpni, 0, priv->token, &dpni_enabled);
 		if (ret) {
-			PMD_DRV_LOG(ERR, "dpni_is_enabled failed (%d)", ret);
+			DPAA2_PMD_ERR("dpni_is_enabled failed (%d)", ret);
 			return ret;
 		}
 		if (dpni_enabled)
@@ -1475,12 +1478,12 @@ dpaa2_dev_set_link_down(struct rte_eth_dev *dev)
 	} while (dpni_enabled && --retries);
 
 	if (!retries) {
-		PMD_DRV_LOG(WARNING, "Retry count exceeded disabling DPNI\n");
+		DPAA2_PMD_WARN("Retry count exceeded disabling DPNI");
 		/* todo- we may have to manually cleanup queues.
 		 */
 	} else {
-		PMD_DRV_LOG(INFO, "Port %d Link DOWN successful",
-			    dev->data->port_id);
+		DPAA2_PMD_INFO("Port %d Link Down successful",
+			       dev->data->port_id);
 	}
 
 	dev->data->dev_link.link_status = 0;
@@ -1502,13 +1505,13 @@ dpaa2_flow_ctrl_get(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
 	dpni = (struct fsl_mc_io *)priv->hw;
 
 	if (dpni == NULL || fc_conf == NULL) {
-		RTE_LOG(ERR, PMD, "device not configured\n");
+		DPAA2_PMD_ERR("device not configured");
 		return ret;
 	}
 
 	ret = dpni_get_link_state(dpni, CMD_PRI_LOW, priv->token, &state);
 	if (ret) {
-		RTE_LOG(ERR, PMD, "error: dpni_get_link_state %d\n", ret);
+		DPAA2_PMD_ERR("error: dpni_get_link_state %d", ret);
 		return ret;
 	}
 
@@ -1558,7 +1561,7 @@ dpaa2_flow_ctrl_set(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
 	dpni = (struct fsl_mc_io *)priv->hw;
 
 	if (dpni == NULL) {
-		RTE_LOG(ERR, PMD, "dpni is NULL\n");
+		DPAA2_PMD_ERR("dpni is NULL");
 		return ret;
 	}
 
@@ -1568,7 +1571,7 @@ dpaa2_flow_ctrl_set(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
 	 */
 	ret = dpni_get_link_state(dpni, CMD_PRI_LOW, priv->token, &state);
 	if (ret) {
-		RTE_LOG(ERR, PMD, "Unable to get link state (err=%d)\n", ret);
+		DPAA2_PMD_ERR("Unable to get link state (err=%d)", ret);
 		return -1;
 	}
 
@@ -1613,16 +1616,15 @@ dpaa2_flow_ctrl_set(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
 		cfg.options &= ~DPNI_LINK_OPT_ASYM_PAUSE;
 		break;
 	default:
-		RTE_LOG(ERR, PMD, "Incorrect Flow control flag (%d)\n",
-			fc_conf->mode);
+		DPAA2_PMD_ERR("Incorrect Flow control flag (%d)",
+			      fc_conf->mode);
 		return -1;
 	}
 
 	ret = dpni_set_link_cfg(dpni, CMD_PRI_LOW, priv->token, &cfg);
 	if (ret)
-		RTE_LOG(ERR, PMD,
-			"Unable to set Link configuration (err=%d)\n",
-			ret);
+		DPAA2_PMD_ERR("Unable to set Link configuration (err=%d)",
+			      ret);
 
 	/* Enable link */
 	dpaa2_dev_set_link_up(dev);
@@ -1643,13 +1645,13 @@ dpaa2_dev_rss_hash_update(struct rte_eth_dev *dev,
 	if (rss_conf->rss_hf) {
 		ret = dpaa2_setup_flow_dist(dev, rss_conf->rss_hf);
 		if (ret) {
-			PMD_INIT_LOG(ERR, "unable to set flow dist");
+			DPAA2_PMD_ERR("Unable to set flow dist");
 			return ret;
 		}
 	} else {
 		ret = dpaa2_remove_flow_dist(dev, 0);
 		if (ret) {
-			PMD_INIT_LOG(ERR, "unable to remove flow dist");
+			DPAA2_PMD_ERR("Unable to remove flow dist");
 			return ret;
 		}
 	}
@@ -1707,7 +1709,7 @@ int dpaa2_eth_eventq_attach(const struct rte_eth_dev *dev,
 	ret = dpni_set_queue(dpni, CMD_PRI_LOW, eth_priv->token, DPNI_QUEUE_RX,
 			     dpaa2_ethq->tc_index, flow_id, options, &cfg);
 	if (ret) {
-		RTE_LOG(ERR, PMD, "Error in dpni_set_queue: ret: %d\n", ret);
+		DPAA2_PMD_ERR("Error in dpni_set_queue: ret: %d", ret);
 		return ret;
 	}
 
@@ -1734,7 +1736,7 @@ int dpaa2_eth_eventq_detach(const struct rte_eth_dev *dev,
 	ret = dpni_set_queue(dpni, CMD_PRI_LOW, eth_priv->token, DPNI_QUEUE_RX,
 			     dpaa2_ethq->tc_index, flow_id, options, &cfg);
 	if (ret)
-		RTE_LOG(ERR, PMD, "Error in dpni_set_queue: ret: %d\n", ret);
+		DPAA2_PMD_ERR("Error in dpni_set_queue: ret: %d", ret);
 
 	return ret;
 }
@@ -1801,15 +1803,15 @@ dpaa2_dev_init(struct rte_eth_dev *eth_dev)
 
 	dpni_dev = rte_malloc(NULL, sizeof(struct fsl_mc_io), 0);
 	if (!dpni_dev) {
-		PMD_INIT_LOG(ERR, "malloc failed for dpni device\n");
+		DPAA2_PMD_ERR("Memory allocation failed for dpni device");
 		return -1;
 	}
 
 	dpni_dev->regs = rte_mcp_ptr_list[0];
 	ret = dpni_open(dpni_dev, CMD_PRI_LOW, hw_id, &priv->token);
 	if (ret) {
-		PMD_INIT_LOG(ERR,
-			     "Failure in opening dpni@%d with err code %d\n",
+		DPAA2_PMD_ERR(
+			     "Failure in opening dpni@%d with err code %d",
 			     hw_id, ret);
 		rte_free(dpni_dev);
 		return -1;
@@ -1818,16 +1820,15 @@ dpaa2_dev_init(struct rte_eth_dev *eth_dev)
 	/* Clean the device first */
 	ret = dpni_reset(dpni_dev, CMD_PRI_LOW, priv->token);
 	if (ret) {
-		PMD_INIT_LOG(ERR,
-			     "Failure cleaning dpni@%d with err code %d\n",
-			     hw_id, ret);
+		DPAA2_PMD_ERR("Failure cleaning dpni@%d with err code %d",
+			      hw_id, ret);
 		goto init_err;
 	}
 
 	ret = dpni_get_attributes(dpni_dev, CMD_PRI_LOW, priv->token, &attr);
 	if (ret) {
-		PMD_INIT_LOG(ERR,
-			     "Failure in get dpni@%d attribute, err code %d\n",
+		DPAA2_PMD_ERR(
+			     "Failure in get dpni@%d attribute, err code %d",
 			     hw_id, ret);
 		goto init_err;
 	}
@@ -1843,8 +1844,9 @@ dpaa2_dev_init(struct rte_eth_dev *eth_dev)
 	/* Using number of TX queues as number of TX TCs */
 	priv->nb_tx_queues = attr.num_tx_tcs;
 
-	PMD_DRV_LOG(DEBUG, "RX-TC= %d, nb_rx_queues= %d, nb_tx_queues=%d",
-		    priv->num_rx_tc, priv->nb_rx_queues, priv->nb_tx_queues);
+	DPAA2_PMD_DEBUG("RX-TC= %d, nb_rx_queues= %d, nb_tx_queues=%d",
+			priv->num_rx_tc, priv->nb_rx_queues,
+			priv->nb_tx_queues);
 
 	priv->hw = dpni_dev;
 	priv->hw_id = hw_id;
@@ -1856,7 +1858,7 @@ dpaa2_dev_init(struct rte_eth_dev *eth_dev)
 	/* Allocate memory for hardware structure for queues */
 	ret = dpaa2_alloc_rx_tx_queues(eth_dev);
 	if (ret) {
-		PMD_INIT_LOG(ERR, "dpaa2_alloc_rx_tx_queuesFailed\n");
+		DPAA2_PMD_ERR("Queue allocation Failed");
 		goto init_err;
 	}
 
@@ -1864,9 +1866,9 @@ dpaa2_dev_init(struct rte_eth_dev *eth_dev)
 	eth_dev->data->mac_addrs = rte_zmalloc("dpni",
 		ETHER_ADDR_LEN * attr.mac_filter_entries, 0);
 	if (eth_dev->data->mac_addrs == NULL) {
-		PMD_INIT_LOG(ERR,
+		DPAA2_PMD_ERR(
 		   "Failed to allocate %d bytes needed to store MAC addresses",
-			     ETHER_ADDR_LEN * attr.mac_filter_entries);
+		   ETHER_ADDR_LEN * attr.mac_filter_entries);
 		ret = -ENOMEM;
 		goto init_err;
 	}
@@ -1875,7 +1877,7 @@ dpaa2_dev_init(struct rte_eth_dev *eth_dev)
 					priv->token,
 			(uint8_t *)(eth_dev->data->mac_addrs[0].addr_bytes));
 	if (ret) {
-		PMD_INIT_LOG(ERR, "DPNI get mac address failed:Err Code = %d\n",
+		DPAA2_PMD_ERR("DPNI get mac address failed:Err Code = %d",
 			     ret);
 		goto init_err;
 	}
@@ -1887,8 +1889,7 @@ dpaa2_dev_init(struct rte_eth_dev *eth_dev)
 	ret = dpni_set_buffer_layout(dpni_dev, CMD_PRI_LOW, priv->token,
 				     DPNI_QUEUE_TX, &layout);
 	if (ret) {
-		PMD_INIT_LOG(ERR, "Error (%d) in setting tx buffer layout",
-			     ret);
+		DPAA2_PMD_ERR("Error (%d) in setting tx buffer layout", ret);
 		goto init_err;
 	}
 
@@ -1899,7 +1900,7 @@ dpaa2_dev_init(struct rte_eth_dev *eth_dev)
 	ret = dpni_set_buffer_layout(dpni_dev, CMD_PRI_LOW, priv->token,
 				     DPNI_QUEUE_TX_CONFIRM, &layout);
 	if (ret) {
-		PMD_INIT_LOG(ERR, "Error (%d) in setting tx-conf buffer layout",
+		DPAA2_PMD_ERR("Error (%d) in setting tx-conf buffer layout",
 			     ret);
 		goto init_err;
 	}
@@ -1910,7 +1911,7 @@ dpaa2_dev_init(struct rte_eth_dev *eth_dev)
 	eth_dev->tx_pkt_burst = dpaa2_dev_tx;
 	rte_fslmc_vfio_dmamap();
 
-	RTE_LOG(INFO, PMD, "%s: netdev created\n", eth_dev->data->name);
+	DPAA2_PMD_INFO("%s: netdev created", eth_dev->data->name);
 	return 0;
 init_err:
 	dpaa2_dev_uninit(eth_dev);
@@ -1931,7 +1932,7 @@ dpaa2_dev_uninit(struct rte_eth_dev *eth_dev)
 		return 0;
 
 	if (!dpni) {
-		PMD_INIT_LOG(WARNING, "Already closed or not started");
+		DPAA2_PMD_WARN("Already closed or not started");
 		return -1;
 	}
 
@@ -1958,8 +1959,8 @@ dpaa2_dev_uninit(struct rte_eth_dev *eth_dev)
 	/* Close the device at underlying layer*/
 	ret = dpni_close(dpni, CMD_PRI_LOW, priv->token);
 	if (ret) {
-		PMD_INIT_LOG(ERR,
-			     "Failure closing dpni device with err code %d\n",
+		DPAA2_PMD_ERR(
+			     "Failure closing dpni device with err code %d",
 			     ret);
 	}
 
@@ -1971,7 +1972,7 @@ dpaa2_dev_uninit(struct rte_eth_dev *eth_dev)
 	eth_dev->rx_pkt_burst = NULL;
 	eth_dev->tx_pkt_burst = NULL;
 
-	RTE_LOG(INFO, PMD, "%s: netdev created\n", eth_dev->data->name);
+	DPAA2_PMD_INFO("%s: netdev deleted", eth_dev->data->name);
 	return 0;
 }
 
@@ -1991,8 +1992,8 @@ rte_dpaa2_probe(struct rte_dpaa2_driver *dpaa2_drv,
 						sizeof(struct dpaa2_dev_priv),
 						RTE_CACHE_LINE_SIZE);
 		if (eth_dev->data->dev_private == NULL) {
-			PMD_INIT_LOG(CRIT, "Cannot allocate memzone for"
-				     " private port data\n");
+			DPAA2_PMD_CRIT(
+				"Unable to allocate memory for private data");
 			rte_eth_dev_release_port(eth_dev);
 			return -ENOMEM;
 		}
@@ -2045,3 +2046,12 @@ static struct rte_dpaa2_driver rte_dpaa2_pmd = {
 };
 
 RTE_PMD_REGISTER_DPAA2(net_dpaa2, rte_dpaa2_pmd);
+
+RTE_INIT(dpaa2_pmd_init_log);
+static void
+dpaa2_pmd_init_log(void)
+{
+	dpaa2_logtype_pmd = rte_log_register("pmd.dpaa2");
+	if (dpaa2_logtype_pmd >= 0)
+		rte_log_set_level(dpaa2_logtype_pmd, RTE_LOG_NOTICE);
+}
diff --git a/drivers/net/dpaa2/dpaa2_pmd_logs.h b/drivers/net/dpaa2/dpaa2_pmd_logs.h
new file mode 100644
index 000000000..98a48968a
--- /dev/null
+++ b/drivers/net/dpaa2/dpaa2_pmd_logs.h
@@ -0,0 +1,41 @@
+/*-
+ * SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2017 NXP
+ */
+
+#ifndef _DPAA2_PMD_LOGS_H_
+#define _DPAA2_PMD_LOGS_H_
+
+extern int dpaa2_logtype_pmd;
+
+#define DPAA2_PMD_LOG(level, fmt, args...) \
+	rte_log(RTE_LOG_ ## level, dpaa2_logtype_pmd, "dpaa2_net: " \
+		fmt "\n", ##args)
+
+#define DPAA2_PMD_DEBUG(fmt, args...) \
+	rte_log(RTE_LOG_DEBUG, dpaa2_logtype_pmd, "dpaa2_net: %s(): "\
+		fmt "\n", __func__, ##args)
+
+#define PMD_INIT_FUNC_TRACE() DPAA2_PMD_LOG(DEBUG, " >>")
+
+#define DPAA2_PMD_CRIT(fmt, args...) \
+	DPAA2_PMD_LOG(CRIT, fmt, ## args)
+#define DPAA2_PMD_INFO(fmt, args...) \
+	DPAA2_PMD_LOG(INFO, fmt, ## args)
+#define DPAA2_PMD_ERR(fmt, args...) \
+	DPAA2_PMD_LOG(ERR, fmt, ## args)
+#define DPAA2_PMD_WARN(fmt, args...) \
+	DPAA2_PMD_LOG(WARNING, fmt, ## args)
+
+/* DP Logs, toggled out at compile time if level lower than current level */
+#define DPAA2_PMD_DP_LOG(level, fmt, args...) \
+	RTE_LOG_DP(level, PMD, fmt, ## args)
+
+#define DPAA2_PMD_DP_DEBUG(fmt, args...) \
+	DPAA2_PMD_DP_LOG(DEBUG, fmt, ## args)
+#define DPAA2_PMD_DP_INFO(fmt, args...) \
+	DPAA2_PMD_DP_LOG(INFO, fmt, ## args)
+#define DPAA2_PMD_DP_WARN(fmt, args...) \
+	DPAA2_PMD_DP_LOG(WARNING, fmt, ## args)
+
+#endif /* _DPAA2_PMD_LOGS_H_ */
diff --git a/drivers/net/dpaa2/dpaa2_rxtx.c b/drivers/net/dpaa2/dpaa2_rxtx.c
index 21a08b690..74d004f93 100644
--- a/drivers/net/dpaa2/dpaa2_rxtx.c
+++ b/drivers/net/dpaa2/dpaa2_rxtx.c
@@ -16,12 +16,12 @@
 #include <rte_dev.h>
 
 #include <rte_fslmc.h>
-#include <fslmc_logs.h>
 #include <fslmc_vfio.h>
 #include <dpaa2_hw_pvt.h>
 #include <dpaa2_hw_dpio.h>
 #include <dpaa2_hw_mempool.h>
 
+#include "dpaa2_pmd_logs.h"
 #include "dpaa2_ethdev.h"
 #include "base/dpaa2_hw_dpni_annot.h"
 
@@ -36,7 +36,7 @@
 static inline void __attribute__((hot))
 dpaa2_dev_rx_parse_frc(struct rte_mbuf *m, uint16_t frc)
 {
-	PMD_RX_LOG(DEBUG, "frc = 0x%x   ", frc);
+	DPAA2_PMD_DP_DEBUG("frc = 0x%x\t", frc);
 
 	m->packet_type = RTE_PTYPE_UNKNOWN;
 	switch (frc) {
@@ -107,7 +107,8 @@ dpaa2_dev_rx_parse_slow(struct dpaa2_annot_hdr *annotation)
 {
 	uint32_t pkt_type = RTE_PTYPE_UNKNOWN;
 
-	PMD_RX_LOG(DEBUG, "annotation = 0x%" PRIx64, annotation->word4);
+	DPAA2_PMD_DP_DEBUG("(slow parse) Annotation = 0x%" PRIx64 "\t",
+			   annotation->word4);
 	if (BIT_ISSET_AT_POS(annotation->word3, L2_ARP_PRESENT)) {
 		pkt_type = RTE_PTYPE_L2_ETHER_ARP;
 		goto parse_done;
@@ -169,7 +170,8 @@ dpaa2_dev_rx_parse(struct rte_mbuf *mbuf, void *hw_annot_addr)
 	struct dpaa2_annot_hdr *annotation =
 			(struct dpaa2_annot_hdr *)hw_annot_addr;
 
-	PMD_RX_LOG(DEBUG, "annotation = 0x%" PRIx64, annotation->word4);
+	DPAA2_PMD_DP_DEBUG("(fast parse) Annotation = 0x%" PRIx64 "\t",
+			   annotation->word4);
 
 	/* Check offloads first */
 	if (BIT_ISSET_AT_POS(annotation->word3,
@@ -200,7 +202,6 @@ dpaa2_dev_rx_parse(struct rte_mbuf *mbuf, void *hw_annot_addr)
 		return  RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV6 |
 				RTE_PTYPE_L4_UDP;
 	default:
-		PMD_RX_LOG(DEBUG, "Slow parse the parsing results\n");
 		break;
 	}
 
@@ -298,9 +299,9 @@ eth_fd_to_mbuf(const struct qbman_fd *fd)
 			(void *)((size_t)DPAA2_IOVA_TO_VADDR(DPAA2_GET_FD_ADDR(fd))
 			 + DPAA2_FD_PTA_SIZE));
 
-	PMD_RX_LOG(DEBUG, "to mbuf - mbuf =%p, mbuf->buf_addr =%p, off = %d,"
+	DPAA2_PMD_DP_DEBUG("to mbuf - mbuf =%p, mbuf->buf_addr =%p, off = %d,"
 		"fd_off=%d fd =%" PRIx64 ", meta = %d  bpid =%d, len=%d\n",
-		(void *)mbuf, (void *)mbuf->buf_addr, mbuf->data_off,
+		mbuf, mbuf->buf_addr, mbuf->data_off,
 		DPAA2_GET_FD_OFFSET(fd), DPAA2_GET_FD_ADDR(fd),
 		rte_dpaa2_bpid_info[DPAA2_GET_FD_BPID(fd)].meta_data_size,
 		DPAA2_GET_FD_BPID(fd), DPAA2_GET_FD_LEN(fd));
@@ -324,7 +325,7 @@ eth_mbuf_to_sg_fd(struct rte_mbuf *mbuf,
 
 	temp = rte_pktmbuf_alloc(mbuf->pool);
 	if (temp == NULL) {
-		PMD_TX_LOG(ERR, "No memory to allocate S/G table");
+		DPAA2_PMD_ERR("No memory to allocate S/G table");
 		return -ENOMEM;
 	}
 
@@ -397,9 +398,9 @@ eth_mbuf_to_fd(struct rte_mbuf *mbuf,
 
 	DPAA2_MBUF_TO_CONTIG_FD(mbuf, fd, bpid);
 
-	PMD_TX_LOG(DEBUG, "mbuf =%p, mbuf->buf_addr =%p, off = %d,"
+	DPAA2_PMD_DP_DEBUG("mbuf =%p, mbuf->buf_addr =%p, off = %d,"
 		"fd_off=%d fd =%" PRIx64 ", meta = %d  bpid =%d, len=%d\n",
-		(void *)mbuf, mbuf->buf_addr, mbuf->data_off,
+		mbuf, mbuf->buf_addr, mbuf->data_off,
 		DPAA2_GET_FD_OFFSET(fd), DPAA2_GET_FD_ADDR(fd),
 		rte_dpaa2_bpid_info[DPAA2_GET_FD_BPID(fd)].meta_data_size,
 		DPAA2_GET_FD_BPID(fd), DPAA2_GET_FD_LEN(fd));
@@ -435,7 +436,7 @@ eth_copy_mbuf_to_fd(struct rte_mbuf *mbuf,
 
 	if (rte_dpaa2_mbuf_alloc_bulk(
 		rte_dpaa2_bpid_info[bpid].bp_list->mp, &mb, 1)) {
-		PMD_TX_LOG(WARNING, "Unable to allocated DPAA2 buffer");
+		DPAA2_PMD_DP_WARN("Unable to allocated DPAA2 buffer\n");
 		return -1;
 	}
 	m = (struct rte_mbuf *)mb;
@@ -451,18 +452,18 @@ eth_copy_mbuf_to_fd(struct rte_mbuf *mbuf,
 
 	DPAA2_MBUF_TO_CONTIG_FD(m, fd, bpid);
 
-	PMD_TX_LOG(DEBUG, " mbuf %p BMAN buf addr %p",
-		   (void *)mbuf, mbuf->buf_addr);
-
-	PMD_TX_LOG(DEBUG,
-		"fd_off=%d fd =%" PRIx64 ", meta = %d  bpid =%d, len=%d\n",
-		DPAA2_GET_FD_OFFSET(fd),
+	DPAA2_PMD_DP_DEBUG(
+		"mbuf: %p, BMAN buf addr: %p, fdaddr: %" PRIx64 ", bpid: %d,"
+		" meta: %d, off: %d, len: %d\n",
+		(void *)mbuf,
+		mbuf->buf_addr,
 		DPAA2_GET_FD_ADDR(fd),
-		rte_dpaa2_bpid_info[DPAA2_GET_FD_BPID(fd)].meta_data_size,
 		DPAA2_GET_FD_BPID(fd),
+		rte_dpaa2_bpid_info[DPAA2_GET_FD_BPID(fd)].meta_data_size,
+		DPAA2_GET_FD_OFFSET(fd),
 		DPAA2_GET_FD_LEN(fd));
 
-	return 0;
+return 0;
 }
 
 uint16_t
@@ -483,7 +484,7 @@ dpaa2_dev_prefetch_rx(void *queue, struct rte_mbuf **bufs, uint16_t nb_pkts)
 	if (unlikely(!DPAA2_PER_LCORE_DPIO)) {
 		ret = dpaa2_affine_qbman_swp();
 		if (ret) {
-			RTE_LOG(ERR, PMD, "Failure in affining portal\n");
+			DPAA2_PMD_DP_WARN("Failure in affining portal\n");
 			return 0;
 		}
 	}
@@ -507,8 +508,8 @@ dpaa2_dev_prefetch_rx(void *queue, struct rte_mbuf **bufs, uint16_t nb_pkts)
 		}
 		while (1) {
 			if (qbman_swp_pull(swp, &pulldesc)) {
-				PMD_RX_LOG(WARNING, "VDQ command is not issued."
-					   "QBMAN is busy\n");
+				DPAA2_PMD_DP_WARN("VDQ command is not issued."
+						  " QBMAN is busy (1)\n");
 				/* Portal was busy, try again */
 				continue;
 			}
@@ -591,8 +592,8 @@ dpaa2_dev_prefetch_rx(void *queue, struct rte_mbuf **bufs, uint16_t nb_pkts)
 	/* issue a volatile dequeue command for next pull */
 	while (1) {
 		if (qbman_swp_pull(swp, &pulldesc)) {
-			PMD_RX_LOG(WARNING, "VDQ command is not issued."
-				   "QBMAN is busy\n");
+			DPAA2_PMD_DP_WARN("VDQ command is not issued."
+					  "QBMAN is busy (2)\n");
 			continue;
 		}
 		break;
@@ -683,13 +684,13 @@ dpaa2_dev_tx(void *queue, struct rte_mbuf **bufs, uint16_t nb_pkts)
 	if (unlikely(!DPAA2_PER_LCORE_DPIO)) {
 		ret = dpaa2_affine_qbman_swp();
 		if (ret) {
-			RTE_LOG(ERR, PMD, "Failure in affining portal\n");
+			DPAA2_PMD_DP_WARN("Failure in affining portal\n");
 			return 0;
 		}
 	}
 	swp = DPAA2_PER_LCORE_PORTAL;
 
-	PMD_TX_LOG(DEBUG, "===> dev =%p, fqid =%d", dev, dpaa2_q->fqid);
+	DPAA2_PMD_DP_DEBUG("===> dev =%p, fqid =%d\n", dev, dpaa2_q->fqid);
 
 	/*Prepare enqueue descriptor*/
 	qbman_eq_desc_clear(&eqdesc);
@@ -750,19 +751,19 @@ dpaa2_dev_tx(void *queue, struct rte_mbuf **bufs, uint16_t nb_pkts)
 			}
 			/* Not a hw_pkt pool allocated frame */
 			if (unlikely(!mp || !priv->bp_list)) {
-				PMD_TX_LOG(ERR, "err: no bpool attached");
+				DPAA2_PMD_ERR("Err: No buffer pool attached");
 				goto send_n_return;
 			}
 
 			if (mp->ops_index != priv->bp_list->dpaa2_ops_index) {
-				PMD_TX_LOG(ERR, "non hw offload bufffer ");
+				DPAA2_PMD_WARN("Non DPAA2 buffer pool");
 				/* alloc should be from the default buffer pool
 				 * attached to this interface
 				 */
 				bpid = priv->bp_list->buf_pool.bpid;
 
 				if (unlikely((*bufs)->nb_segs > 1)) {
-					PMD_TX_LOG(ERR, "S/G support not added"
+					DPAA2_PMD_ERR("S/G support not added"
 						" for non hw offload buffer");
 					goto send_n_return;
 				}
-- 
2.14.1

  parent reply index

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-12  9:25 [PATCH 0/7] Change DPAA2 to " Shreyansh Jain
2018-03-12  9:25 ` [PATCH 1/7] bus/fslmc: change " Shreyansh Jain
2018-03-12  9:25 ` [PATCH 2/7] mempool/dpaa2: " Shreyansh Jain
2018-03-12  9:25 ` Shreyansh Jain [this message]
2018-03-12 11:04   ` [PATCH 3/7] net/dpaa2: change into " Ferruh Yigit
2018-03-12 12:01     ` Shreyansh Jain
2018-03-12  9:25 ` [PATCH 4/7] event/dpaa2: change to " Shreyansh Jain
2018-03-12  9:25 ` [PATCH 5/7] bus/fslmc: remove unused debug macros Shreyansh Jain
2018-03-12  9:25 ` [PATCH 6/7] crypto/dpaa2_sec: fix incorrect debugging prints Shreyansh Jain
2018-03-12  9:25 ` [PATCH 7/7] crypto/dpaa2_sec: change to dynamic logging Shreyansh Jain
2018-03-12 12:10 ` [PATCH 0/7] Change DPAA2 " Hemant Agrawal
2018-03-12 12:37 ` Shreyansh Jain
2018-03-13  5:44 ` [RESEND v2 " Shreyansh Jain
2018-03-13  5:44   ` [RESEND v2 1/7] bus/fslmc: change " Shreyansh Jain
2018-03-21  6:24     ` Hemant Agrawal
2018-03-13  5:44   ` [RESEND v2 2/7] mempool/dpaa2: " Shreyansh Jain
2018-03-21  6:27     ` Hemant Agrawal
2018-03-13  5:44   ` [RESEND v2 3/7] net/dpaa2: change into " Shreyansh Jain
2018-03-21  6:31     ` Hemant Agrawal
2018-03-23  7:19       ` Shreyansh Jain
2018-03-13  5:44   ` [RESEND v2 4/7] event/dpaa2: change to " Shreyansh Jain
2018-03-14  4:01     ` Nipun Gupta
2018-03-13  5:44   ` [RESEND v2 5/7] bus/fslmc: remove unused debug macros Shreyansh Jain
2018-03-21  6:13     ` Hemant Agrawal
2018-03-13  5:44   ` [RESEND v2 6/7] crypto/dpaa2_sec: fix incorrect debugging prints Shreyansh Jain
2018-03-21  6:12     ` Hemant Agrawal
2018-03-13  5:44   ` [RESEND v2 7/7] crypto/dpaa2_sec: change to dynamic logging Shreyansh Jain
2018-03-21  6:18     ` Hemant Agrawal
2018-03-23 12:04   ` [PATCH v3 0/7] Change DPAA2 " Shreyansh Jain
2018-03-23 12:04     ` [PATCH v3 1/7] bus/fslmc: change " Shreyansh Jain
2018-03-23 12:04     ` [PATCH v3 2/7] mempool/dpaa2: " Shreyansh Jain
2018-03-26  8:48       ` Hemant Agrawal
2018-03-23 12:04     ` [PATCH v3 3/7] net/dpaa2: change into " Shreyansh Jain
2018-03-26  8:48       ` Hemant Agrawal
2018-03-29 15:26       ` Thomas Monjalon
2018-03-29 18:01         ` Shreyansh Jain
2018-03-23 12:04     ` [PATCH v3 4/7] event/dpaa2: change to " Shreyansh Jain
2018-03-23 12:04     ` [PATCH v3 5/7] bus/fslmc: remove unused debug macros Shreyansh Jain
2018-03-23 12:04     ` [PATCH v3 6/7] crypto/dpaa2_sec: fix incorrect debugging prints Shreyansh Jain
2018-03-23 12:04     ` [PATCH v3 7/7] crypto/dpaa2_sec: change to dynamic logging Shreyansh Jain
2018-04-02 14:05     ` [PATCH v4 0/7] Change DPAA2 " Shreyansh Jain
2018-04-02 14:05       ` [PATCH v4 1/7] bus/fslmc: change " Shreyansh Jain
2019-12-03 15:35         ` [dpdk-dev] " Ferruh Yigit
2018-04-02 14:05       ` [PATCH v4 2/7] mempool/dpaa2: " Shreyansh Jain
2018-04-02 14:05       ` [PATCH v4 3/7] net/dpaa2: change into " Shreyansh Jain
2018-04-02 14:05       ` [PATCH v4 4/7] event/dpaa2: change to " Shreyansh Jain
2018-04-02 14:05       ` [PATCH v4 5/7] bus/fslmc: remove unused debug macros Shreyansh Jain
2018-04-02 14:06       ` [PATCH v4 6/7] crypto/dpaa2_sec: fix incorrect debugging prints Shreyansh Jain
2018-04-02 14:06       ` [PATCH v4 7/7] crypto/dpaa2_sec: change to dynamic logging Shreyansh Jain
2018-04-02 22:03       ` [PATCH v4 0/7] Change DPAA2 " Thomas Monjalon

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180312092547.18472-4-shreyansh.jain@nxp.com \
    --to=shreyansh.jain@nxp.com \
    --cc=akhil.goyal@nxp.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=hemant.agrawal@nxp.com \
    --cc=nipun.gupta@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK-dev Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/dpdk-dev/0 dpdk-dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dpdk-dev dpdk-dev/ https://lore.kernel.org/dpdk-dev \
		dev@dpdk.org
	public-inbox-index dpdk-dev

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git