From: Zhihong Wang <zhihong.wang@intel.com>
To: dev@dpdk.org
Cc: jianfeng.tan@intel.com, tiwei.bie@intel.com,
maxime.coquelin@redhat.com, yliu@fridaylinux.org,
cunming.liang@intel.com, xiao.w.wang@intel.com,
dan.daly@intel.com, Zhihong Wang <zhihong.wang@intel.com>
Subject: [PATCH v5 2/5] vhost: support selective datapath
Date: Mon, 2 Apr 2018 19:46:53 +0800 [thread overview]
Message-ID: <20180402114656.17090-3-zhihong.wang@intel.com> (raw)
In-Reply-To: <20180402114656.17090-1-zhihong.wang@intel.com>
This patch set introduces support for selective datapath in DPDK vhost-user
lib. vDPA stands for vhost Data Path Acceleration. The idea is to support
virtio ring compatible devices to serve virtio driver directly to enable
datapath acceleration.
A set of device ops is defined for device specific operations:
a. get_queue_num: Called to get supported queue number of the device.
b. get_features: Called to get supported features of the device.
c. get_protocol_features: Called to get supported protocol features of
the device.
d. dev_conf: Called to configure the actual device when the virtio
device becomes ready.
e. dev_close: Called to close the actual device when the virtio device
is stopped.
f. set_vring_state: Called to change the state of the vring in the
actual device when vring state changes.
g. set_features: Called to set the negotiated features to device.
h. migration_done: Called to allow the device to response to RARP
sending.
i. get_vfio_group_fd: Called to get the VFIO group fd of the device.
j. get_vfio_device_fd: Called to get the VFIO device fd of the device.
k. get_notify_area: Called to get the notify area info of the queue.
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
---
Changes in v5:
1. Rename the vDPA device ops to follow convention.
2. Improve sanity check.
---
Changes in v4:
1. Remove the "engine" concept in the lib.
---
Changes in v2:
1. Add VFIO related vDPA device ops.
lib/librte_vhost/Makefile | 4 +-
lib/librte_vhost/rte_vdpa.h | 87 +++++++++++++++++++++++++
lib/librte_vhost/rte_vhost_version.map | 7 ++
lib/librte_vhost/vdpa.c | 115 +++++++++++++++++++++++++++++++++
4 files changed, 211 insertions(+), 2 deletions(-)
create mode 100644 lib/librte_vhost/rte_vdpa.h
create mode 100644 lib/librte_vhost/vdpa.c
diff --git a/lib/librte_vhost/Makefile b/lib/librte_vhost/Makefile
index 5d6c6abae..37044ac03 100644
--- a/lib/librte_vhost/Makefile
+++ b/lib/librte_vhost/Makefile
@@ -22,9 +22,9 @@ LDLIBS += -lrte_eal -lrte_mempool -lrte_mbuf -lrte_ethdev -lrte_net
# all source are stored in SRCS-y
SRCS-$(CONFIG_RTE_LIBRTE_VHOST) := fd_man.c iotlb.c socket.c vhost.c \
- vhost_user.c virtio_net.c
+ vhost_user.c virtio_net.c vdpa.c
# install includes
-SYMLINK-$(CONFIG_RTE_LIBRTE_VHOST)-include += rte_vhost.h
+SYMLINK-$(CONFIG_RTE_LIBRTE_VHOST)-include += rte_vhost.h rte_vdpa.h
include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/lib/librte_vhost/rte_vdpa.h b/lib/librte_vhost/rte_vdpa.h
new file mode 100644
index 000000000..90465ca26
--- /dev/null
+++ b/lib/librte_vhost/rte_vdpa.h
@@ -0,0 +1,87 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018 Intel Corporation
+ */
+
+#ifndef _RTE_VDPA_H_
+#define _RTE_VDPA_H_
+
+/**
+ * @file
+ *
+ * Device specific vhost lib
+ */
+
+#include <rte_pci.h>
+#include "rte_vhost.h"
+
+#define MAX_VDPA_NAME_LEN 128
+
+enum vdpa_addr_type {
+ PCI_ADDR,
+ VDPA_ADDR_MAX
+};
+
+struct rte_vdpa_dev_addr {
+ enum vdpa_addr_type type;
+ union {
+ uint8_t __dummy[64];
+ struct rte_pci_addr pci_addr;
+ };
+};
+
+struct rte_vdpa_dev_ops {
+ /* Get capabilities of this device */
+ int (*get_queue_num)(int did, uint32_t *queue_num);
+ int (*get_features)(int did, uint64_t *features);
+ int (*get_protocol_features)(int did, uint64_t *protocol_features);
+
+ /* Driver configure/close the device */
+ int (*dev_conf)(int vid);
+ int (*dev_close)(int vid);
+
+ /* Enable/disable this vring */
+ int (*set_vring_state)(int vid, int vring, int state);
+
+ /* Set features when changed */
+ int (*set_features)(int vid);
+
+ /* Destination operations when migration done */
+ int (*migration_done)(int vid);
+
+ /* Get the vfio group fd */
+ int (*get_vfio_group_fd)(int vid);
+
+ /* Get the vfio device fd */
+ int (*get_vfio_device_fd)(int vid);
+
+ /* Get the notify area info of the queue */
+ int (*get_notify_area)(int vid, int qid,
+ uint64_t *offset, uint64_t *size);
+
+ /* Reserved for future extension */
+ void *reserved[5];
+};
+
+struct rte_vdpa_device {
+ struct rte_vdpa_dev_addr addr;
+ struct rte_vdpa_dev_ops *ops;
+} __rte_cache_aligned;
+
+/* Register a vdpa device, return did if successful, -1 on failure */
+int __rte_experimental
+rte_vdpa_register_device(struct rte_vdpa_dev_addr *addr,
+ struct rte_vdpa_dev_ops *ops);
+
+/* Unregister a vdpa device, return -1 on failure */
+int __rte_experimental
+rte_vdpa_unregister_device(int did);
+
+/* Find did of a vdpa device, return -1 on failure */
+int __rte_experimental
+rte_vdpa_find_device_id(struct rte_vdpa_dev_addr *addr);
+
+/* Find a vdpa device based on did */
+struct rte_vdpa_device * __rte_experimental
+rte_vdpa_get_device(int did);
+
+#endif /* _RTE_VDPA_H_ */
diff --git a/lib/librte_vhost/rte_vhost_version.map b/lib/librte_vhost/rte_vhost_version.map
index df0103129..d3453a2a7 100644
--- a/lib/librte_vhost/rte_vhost_version.map
+++ b/lib/librte_vhost/rte_vhost_version.map
@@ -59,3 +59,10 @@ DPDK_18.02 {
rte_vhost_vring_call;
} DPDK_17.08;
+
+EXPERIMENTAL {
+ rte_vdpa_register_device;
+ rte_vdpa_unregister_device;
+ rte_vdpa_find_device_id;
+ rte_vdpa_get_device;
+} DPDK_18.02;
diff --git a/lib/librte_vhost/vdpa.c b/lib/librte_vhost/vdpa.c
new file mode 100644
index 000000000..4b339b1c2
--- /dev/null
+++ b/lib/librte_vhost/vdpa.c
@@ -0,0 +1,115 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018 Intel Corporation
+ */
+
+/**
+ * @file
+ *
+ * Device specific vhost lib
+ */
+
+#include <stdbool.h>
+
+#include <rte_malloc.h>
+#include "rte_vdpa.h"
+#include "vhost.h"
+
+static struct rte_vdpa_device *vdpa_devices[MAX_VHOST_DEVICE];
+static uint32_t vdpa_device_num;
+
+static bool
+is_same_vdpa_device(struct rte_vdpa_dev_addr *a,
+ struct rte_vdpa_dev_addr *b)
+{
+ bool ret = true;
+
+ if (a->type != b->type)
+ return false;
+
+ switch (a->type) {
+ case PCI_ADDR:
+ if (a->pci_addr.domain != b->pci_addr.domain ||
+ a->pci_addr.bus != b->pci_addr.bus ||
+ a->pci_addr.devid != b->pci_addr.devid ||
+ a->pci_addr.function != b->pci_addr.function)
+ ret = false;
+ break;
+ default:
+ break;
+ }
+
+ return ret;
+}
+
+int
+rte_vdpa_register_device(struct rte_vdpa_dev_addr *addr,
+ struct rte_vdpa_dev_ops *ops)
+{
+ struct rte_vdpa_device *dev;
+ char device_name[MAX_VDPA_NAME_LEN];
+ int i;
+
+ if (vdpa_device_num >= MAX_VHOST_DEVICE)
+ return -1;
+
+ for (i = 0; i < MAX_VHOST_DEVICE; i++) {
+ if (vdpa_devices[i] && is_same_vdpa_device(addr,
+ &vdpa_devices[i]->addr))
+ return -1;
+ }
+
+ for (i = 0; i < MAX_VHOST_DEVICE; i++) {
+ if (vdpa_devices[i] == NULL)
+ break;
+ }
+
+ sprintf(device_name, "vdpa-dev-%d", i);
+ dev = rte_zmalloc(device_name, sizeof(struct rte_vdpa_device),
+ RTE_CACHE_LINE_SIZE);
+ if (!dev)
+ return -1;
+
+ memcpy(&dev->addr, addr, sizeof(struct rte_vdpa_dev_addr));
+ dev->ops = ops;
+ vdpa_devices[i] = dev;
+ vdpa_device_num++;
+
+ return i;
+}
+
+int
+rte_vdpa_unregister_device(int did)
+{
+ if (did < 0 || did >= MAX_VHOST_DEVICE || vdpa_devices[did] == NULL)
+ return -1;
+
+ rte_free(vdpa_devices[did]);
+ vdpa_devices[did] = NULL;
+ vdpa_device_num--;
+
+ return did;
+}
+
+int
+rte_vdpa_find_device_id(struct rte_vdpa_dev_addr *addr)
+{
+ struct rte_vdpa_device *dev;
+ int i;
+
+ for (i = 0; i < MAX_VHOST_DEVICE; ++i) {
+ dev = vdpa_devices[i];
+ if (dev && is_same_vdpa_device(&dev->addr, addr) == 0)
+ return i;
+ }
+
+ return -1;
+}
+
+struct rte_vdpa_device *
+rte_vdpa_get_device(int did)
+{
+ if (did < 0 || did >= MAX_VHOST_DEVICE)
+ return NULL;
+
+ return vdpa_devices[did];
+}
--
2.13.6
next prev parent reply other threads:[~2018-04-02 11:47 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-02 23:28 [PATCH 0/7] vhost: support selective datapath Zhihong Wang
2018-02-02 23:28 ` [PATCH 1/7] vhost: make capabilities configurable Zhihong Wang
2018-02-06 10:19 ` Maxime Coquelin
2018-02-08 3:03 ` Wang, Zhihong
2018-02-02 23:28 ` [PATCH 2/7] vhost: export vhost feature definitions Zhihong Wang
2018-02-02 23:28 ` [PATCH 3/7] vhost: support selective datapath Zhihong Wang
2018-02-02 23:28 ` [PATCH 4/7] vhost: add apis for datapath configuration Zhihong Wang
2018-02-02 23:28 ` [PATCH 5/7] vhost: adapt vhost lib for selective datapath Zhihong Wang
2018-02-02 23:28 ` [PATCH 6/7] vhost: get callfd before device setup Zhihong Wang
2018-02-02 23:28 ` [PATCH 7/7] vhost: export new apis Zhihong Wang
2018-02-13 9:21 ` [PATCH v2 0/6] vhost: support selective datapath Zhihong Wang
2018-02-13 9:21 ` [PATCH v2 1/6] vhost: export vhost feature definitions Zhihong Wang
2018-03-06 9:37 ` Tan, Jianfeng
2018-03-06 14:03 ` Maxime Coquelin
2018-03-15 10:58 ` Wang, Zhihong
2018-02-13 9:21 ` [PATCH v2 2/6] vhost: support selective datapath Zhihong Wang
2018-02-13 9:21 ` [PATCH v2 3/6] vhost: add apis for datapath configuration Zhihong Wang
2018-02-13 9:21 ` [PATCH v2 4/6] vhost: adapt vhost lib for selective datapath Zhihong Wang
2018-02-13 9:21 ` [PATCH v2 5/6] vhost: add apis for live migration Zhihong Wang
2018-02-13 9:21 ` [PATCH v2 6/6] vhost: export new apis Zhihong Wang
2018-03-06 9:51 ` Tan, Jianfeng
2018-03-15 10:55 ` Wang, Zhihong
2018-02-27 10:13 ` [PATCH v3 0/5] vhost: support selective datapath Zhihong Wang
2018-02-27 10:13 ` [PATCH v3 1/5] vhost: export vhost feature definitions Zhihong Wang
2018-02-27 10:13 ` [PATCH v3 2/5] vhost: support selective datapath Zhihong Wang
2018-03-21 21:05 ` Maxime Coquelin
2018-03-22 7:55 ` Wang, Zhihong
2018-03-22 8:31 ` Maxime Coquelin
2018-02-27 10:13 ` [PATCH v3 3/5] vhost: add apis for datapath configuration Zhihong Wang
2018-03-21 21:08 ` Maxime Coquelin
2018-03-22 8:22 ` Wang, Zhihong
2018-03-22 14:18 ` Maxime Coquelin
2018-03-23 10:35 ` Wang, Zhihong
2018-02-27 10:13 ` [PATCH v3 4/5] vhost: adapt vhost lib for selective datapath Zhihong Wang
2018-02-27 10:13 ` [PATCH v3 5/5] vhost: add apis for live migration Zhihong Wang
2018-03-29 12:15 ` [PATCH v3 0/5] vhost: support selective datapath Wodkowski, PawelX
2018-03-30 9:35 ` Wang, Zhihong
2018-03-10 10:01 ` [PATCH v4 " Zhihong Wang
2018-03-10 10:01 ` [PATCH v4 1/5] vhost: export vhost feature definitions Zhihong Wang
2018-03-31 5:56 ` Maxime Coquelin
2018-03-10 10:01 ` [PATCH v4 2/5] vhost: support selective datapath Zhihong Wang
2018-03-31 6:10 ` Maxime Coquelin
2018-04-02 1:58 ` Wang, Zhihong
2018-03-31 7:38 ` Maxime Coquelin
2018-04-02 2:03 ` Wang, Zhihong
2018-03-10 10:01 ` [PATCH v4 3/5] vhost: add apis for datapath configuration Zhihong Wang
2018-03-31 7:04 ` Maxime Coquelin
2018-04-02 2:01 ` Wang, Zhihong
2018-03-10 10:01 ` [PATCH v4 4/5] vhost: adapt vhost lib for selective datapath Zhihong Wang
2018-03-31 7:35 ` Maxime Coquelin
2018-04-02 11:52 ` Wang, Zhihong
2018-03-10 10:01 ` [PATCH v4 5/5] vhost: add apis for live migration Zhihong Wang
2018-03-31 7:39 ` Maxime Coquelin
2018-04-02 11:46 ` [PATCH v5 0/5] vhost: support selective datapath Zhihong Wang
2018-04-02 11:46 ` [PATCH v5 1/5] vhost: export vhost feature definitions Zhihong Wang
2018-04-02 11:46 ` Zhihong Wang [this message]
2018-04-03 8:02 ` [PATCH v5 2/5] vhost: support selective datapath Maxime Coquelin
2018-04-15 17:39 ` Thomas Monjalon
2018-04-16 7:26 ` Maxime Coquelin
2018-04-03 8:19 ` Maxime Coquelin
2018-04-03 14:35 ` Wang, Zhihong
2018-04-02 11:46 ` [PATCH v5 3/5] vhost: add apis for datapath configuration Zhihong Wang
2018-04-03 8:07 ` Maxime Coquelin
2018-04-02 11:46 ` [PATCH v5 4/5] vhost: adapt vhost lib for selective datapath Zhihong Wang
2018-04-03 8:05 ` Maxime Coquelin
2018-04-02 11:46 ` [PATCH v5 5/5] vhost: add apis for live migration Zhihong Wang
2018-04-03 8:27 ` [PATCH v5 0/5] vhost: support selective datapath Maxime Coquelin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180402114656.17090-3-zhihong.wang@intel.com \
--to=zhihong.wang@intel.com \
--cc=cunming.liang@intel.com \
--cc=dan.daly@intel.com \
--cc=dev@dpdk.org \
--cc=jianfeng.tan@intel.com \
--cc=maxime.coquelin@redhat.com \
--cc=tiwei.bie@intel.com \
--cc=xiao.w.wang@intel.com \
--cc=yliu@fridaylinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).