From: Artur Trybula <arturx.trybula@intel.com>
To: dev@dpdk.org, fiona.trahe@intel.com, arturx.trybula@intel.com,
adamx.dybkowski@intel.com
Subject: [dpdk-dev] [PATCH] app/test-compress-perf: report header improvement
Date: Mon, 3 Jun 2019 12:24:01 +0200 [thread overview]
Message-ID: <20190603102401.25715-1-arturx.trybula@intel.com> (raw)
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=y, Size: 5878 bytes --]
This patch adds extra features to the compress performance
test. Some important parameters (memory allocation,
number of ops, number of segments) are calculated and
printed out on the screen.
Signed-off-by: Artur Trybula <arturx.trybula@intel.com>
---
app/test-compress-perf/main.c | 105 +++++++++++++++++++++++++++++++---
1 file changed, 98 insertions(+), 7 deletions(-)
diff --git a/app/test-compress-perf/main.c b/app/test-compress-perf/main.c
index c2a45d130..d1578e435 100644
--- a/app/test-compress-perf/main.c
+++ b/app/test-compress-perf/main.c
@@ -27,6 +27,18 @@ static enum cleanup_st {
ST_DURING_TEST
} cleanup = ST_CLEAR;
+struct performance_tests_results {
+ uint16_t total_segments;
+ uint16_t segment_sz;
+ uint16_t last_segment_sz;
+ uint32_t total_buffs; /*number of buffers = number of ops*/
+ uint16_t segments_per_buff;
+ uint16_t segments_per_last_buff;
+ size_t input_data_sz;
+};
+
+static struct performance_tests_results tests_res;
+
static int
param_range_check(uint16_t size, const struct rte_param_log2_range *range)
{
@@ -218,6 +230,13 @@ comp_perf_allocate_memory(struct comp_test_data *test_data)
" could not be allocated\n");
return -1;
}
+
+ tests_res.total_segments = total_segs;
+ tests_res.segment_sz = test_data->seg_sz;
+ tests_res.total_buffs = test_data->total_bufs;
+ tests_res.segments_per_buff = test_data->max_sgl_segs;
+ tests_res.input_data_sz = test_data->input_data_sz;
+
return 0;
}
@@ -279,9 +298,11 @@ comp_perf_dump_input_data(struct comp_test_data *test_data)
if (test_data->input_data_sz > actual_file_sz)
RTE_LOG(INFO, USER1,
- "%zu bytes read from file %s, extending the file %.2f times\n",
- test_data->input_data_sz, test_data->input_file,
- (double)test_data->input_data_sz/actual_file_sz);
+ "%zu bytes read from file %s, extending the file %.2f times"
+ " to %zu\n",
+ actual_file_sz, test_data->input_file,
+ (double)test_data->input_data_sz/actual_file_sz,
+ test_data->input_data_sz);
else
RTE_LOG(INFO, USER1,
"%zu bytes read from file %s\n",
@@ -349,9 +370,10 @@ prepare_bufs(struct comp_test_data *test_data)
{
uint32_t remaining_data = test_data->input_data_sz;
uint8_t *input_data_ptr = test_data->input_data;
- size_t data_sz;
+ size_t data_sz = 0;
uint8_t *data_addr;
uint32_t i, j;
+ uint16_t segs_per_mbuf = 0;
for (i = 0; i < test_data->total_bufs; i++) {
/* Allocate data in input mbuf and copy data from input file */
@@ -376,7 +398,7 @@ prepare_bufs(struct comp_test_data *test_data)
remaining_data -= data_sz;
/* Already one segment in the mbuf */
- uint16_t segs_per_mbuf = 1;
+ segs_per_mbuf = 1;
/* Chain mbufs if needed for input mbufs */
while (segs_per_mbuf < test_data->max_sgl_segs
@@ -453,6 +475,9 @@ prepare_bufs(struct comp_test_data *test_data)
}
}
+ tests_res.segments_per_last_buff = segs_per_mbuf;
+ tests_res.last_segment_sz = data_sz;
+
return 0;
}
@@ -467,7 +492,71 @@ free_bufs(struct comp_test_data *test_data)
}
}
-
+static void
+print_report_header(void)
+{
+ uint32_t opt_total_segs = DIV_CEIL(tests_res.input_data_sz,
+ MAX_SEG_SIZE);
+
+ if (tests_res.total_buffs > 1) {
+ printf("\nWarning: for the current input parameters number"
+ " of ops is higher than one, which may result"
+ " in sub-optimal performance.\n");
+ printf("To improve the performance (for the current"
+ " input data) following parameters are"
+ " suggested:\n");
+ printf(" • Segment size: %d\n", MAX_SEG_SIZE);
+ printf(" • Number of segments: %u\n", opt_total_segs);
+ } else if (tests_res.total_buffs == 1) {
+ printf("\nWarning: There is only one op with %u segments –"
+ " the compression ratio is the best.\n",
+ tests_res.segments_per_last_buff);
+ if (tests_res.segment_sz < MAX_SEG_SIZE)
+ printf("To reduce compression time, please use"
+ " bigger segment size: %d.\n",
+ MAX_SEG_SIZE);
+ else if (tests_res.segment_sz == MAX_SEG_SIZE)
+ printf("Segment size is optimal for the best"
+ " performance.\n");
+ } else
+ printf("Warning: something wrong happened!!\n");
+
+ printf("\nFor the current input parameters (segment size = %u,"
+ " segments number = %u):\n",
+ tests_res.segment_sz,
+ tests_res.segments_per_buff);
+ printf(" • Total number of segments: %d\n",
+ tests_res.total_segments);
+ printf(" • %u segments %u bytes long, last segment %u"
+ " byte(s) long\n",
+ tests_res.total_segments - 1,
+ tests_res.segment_sz,
+ tests_res.last_segment_sz);
+ printf(" • Number of ops: %u\n", tests_res.total_buffs);
+ printf(" • Total memory allocation: %u\n",
+ (tests_res.total_segments - 1) * tests_res.segment_sz
+ + tests_res.last_segment_sz);
+ if (tests_res.total_buffs > 1)
+ printf(" • %u ops: %u segments in each,"
+ " segment size %u\n",
+ tests_res.total_buffs - 1,
+ tests_res.segments_per_buff,
+ tests_res.segment_sz);
+ if (tests_res.segments_per_last_buff > 1) {
+ printf(" • 1 op %u segments:\n",
+ tests_res.segments_per_last_buff);
+ printf(" o %u segment size %u\n",
+ tests_res.segments_per_last_buff - 1,
+ tests_res.segment_sz);
+ printf(" o last segment size %u\n",
+ tests_res.last_segment_sz);
+ } else if (tests_res.segments_per_last_buff == 1) {
+ printf(" • 1 op (the last one): %u segment %u"
+ " byte(s) long\n\n",
+ tests_res.segments_per_last_buff,
+ tests_res.last_segment_sz);
+ }
+}
int
main(int argc, char **argv)
@@ -533,8 +622,9 @@ main(int argc, char **argv)
else
level = test_data->level.list[0];
+ print_report_header();
+
printf("Burst size = %u\n", test_data->burst_sz);
- printf("File size = %zu\n", test_data->input_data_sz);
printf("%6s%12s%17s%19s%21s%15s%21s%23s%16s\n",
"Level", "Comp size", "Comp ratio [%]",
@@ -612,3 +702,4 @@ main(int argc, char **argv)
}
return ret;
}
+
--
2.17.1
next reply other threads:[~2019-06-03 10:24 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-03 10:24 Artur Trybula [this message]
2019-06-26 17:04 ` [dpdk-dev] [PATCH] app/test-compress-perf: report header improvement Shally Verma
2019-06-27 8:58 ` Trybula, ArturX
2019-06-27 11:00 ` Shally Verma
2019-06-27 11:46 ` Trybula, ArturX
2019-06-27 14:38 ` Shally Verma
2019-06-28 9:52 ` Trybula, ArturX
2019-07-05 6:30 ` [dpdk-dev] [PATCH v2 0/1] add extra features to test-compress-perf Artur Trybula
2019-07-05 6:30 ` [dpdk-dev] [PATCH v2 1/1] app/test-compress-perf: report header improvement Artur Trybula
2019-07-05 6:53 ` Jerin Jacob Kollanukkaran
2019-07-05 7:40 ` [dpdk-dev] [PATCH v3 0/1] add extra features to test-compress-perf Artur Trybula
2019-07-05 7:40 ` [dpdk-dev] [PATCH v3 1/1] app/test-compress-perf: report header improvement Artur Trybula
2019-07-12 10:43 ` [dpdk-dev] [PATCH v4 0/1] add extra features to test-compress-perf Artur Trybula
2019-07-12 10:43 ` [dpdk-dev] [PATCH v4 1/1] app/test-compress-perf: report header improvement Artur Trybula
2019-07-15 12:47 ` [dpdk-dev] [EXT] " Shally Verma
2019-07-15 14:01 ` Trybula, ArturX
2019-07-16 13:49 ` Trahe, Fiona
2019-07-17 7:21 ` Shally Verma
2019-07-17 11:02 ` [dpdk-dev] [PATCH v5 0/1] add extra features to test-compress-perf Artur Trybula
2019-07-17 11:02 ` [dpdk-dev] [PATCH v5 1/1] app/test-compress-perf: report header improvement Artur Trybula
2019-07-17 11:15 ` [dpdk-dev] [EXT] " Shally Verma
2019-07-17 11:26 ` Trybula, ArturX
2019-07-19 13:17 ` Akhil Goyal
2019-07-19 16:21 ` Thomas Monjalon
2019-07-19 17:37 ` Trahe, Fiona
2019-07-24 12:53 ` [dpdk-dev] [PATCH v6 0/1] add extra features to test-compress-perf Adam Dybkowski
2019-07-24 12:53 ` [dpdk-dev] [PATCH v6 1/1] app/test-compress-perf: provide more detailed report Adam Dybkowski
2019-07-24 13:55 ` [dpdk-dev] [PATCH v7 0/1] add extra features to test-compress-perf Adam Dybkowski
2019-07-24 13:55 ` [dpdk-dev] [PATCH v7 1/1] app/test-compress-perf: provide more detailed report Adam Dybkowski
2019-07-25 12:39 ` Trahe, Fiona
2019-07-26 12:41 ` Akhil Goyal
2019-07-17 11:16 ` [dpdk-dev] [EXT] [PATCH v5 0/1] add extra features to test-compress-perf Shally Verma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190603102401.25715-1-arturx.trybula@intel.com \
--to=arturx.trybula@intel.com \
--cc=adamx.dybkowski@intel.com \
--cc=dev@dpdk.org \
--cc=fiona.trahe@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).