DPDK-dev Archive on lore.kernel.org
 help / color / Atom feed
From: Hyong Youb Kim <hyonkim@cisco.com>
To: Ferruh Yigit <ferruh.yigit@intel.com>
Cc: dev@dpdk.org, John Daley <johndale@cisco.com>,
	Hyong Youb Kim <hyonkim@cisco.com>
Subject: [dpdk-dev] [PATCH 1/4] net/enic: set min and max MTU
Date: Thu,  6 Jun 2019 08:26:55 -0700
Message-ID: <20190606152658.17311-2-hyonkim@cisco.com> (raw)
In-Reply-To: <20190606152658.17311-1-hyonkim@cisco.com>

These values correspond to those used in the MTU handler (enic_set_mtu).

Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
 drivers/net/enic/enic_ethdev.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/enic/enic_ethdev.c b/drivers/net/enic/enic_ethdev.c
index 80fbf595e..1bf2ecca8 100644
--- a/drivers/net/enic/enic_ethdev.c
+++ b/drivers/net/enic/enic_ethdev.c
@@ -475,6 +475,8 @@ static void enicpmd_dev_info_get(struct rte_eth_dev *eth_dev,
 	device_info->max_rx_pktlen = enic_mtu_to_max_rx_pktlen(enic->max_mtu);
 	device_info->max_mac_addrs = ENIC_UNICAST_PERFECT_FILTERS;
+	device_info->min_mtu = ENIC_MIN_MTU;
+	device_info->max_mtu = enic->max_mtu;
 	device_info->rx_offload_capa = enic->rx_offload_capa;
 	device_info->tx_offload_capa = enic->tx_offload_capa;
 	device_info->tx_queue_offload_capa = enic->tx_queue_offload_capa;

  reply index

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-06 15:26 [dpdk-dev] [PATCH 0/4] net/enic: minor updates Hyong Youb Kim
2019-06-06 15:26 ` Hyong Youb Kim [this message]
2019-06-06 15:26 ` [dpdk-dev] [PATCH 2/4] net/enic: report speed capabilities Hyong Youb Kim
2019-06-06 15:26 ` [dpdk-dev] [PATCH 3/4] net/enic: remove support for flow count action Hyong Youb Kim
2019-06-06 15:26 ` [dpdk-dev] [PATCH 4/4] net/enic: remove locks from rte flow code Hyong Youb Kim
2019-06-12 13:28 ` [dpdk-dev] [PATCH 0/4] net/enic: minor updates Ferruh Yigit

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190606152658.17311-2-hyonkim@cisco.com \
    --to=hyonkim@cisco.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=johndale@cisco.com \


* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK-dev Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/dpdk-dev/0 dpdk-dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dpdk-dev dpdk-dev/ https://lore.kernel.org/dpdk-dev \
	public-inbox-index dpdk-dev

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone https://public-inbox.org/public-inbox.git