dev.dpdk.org archive mirror
 help / color / mirror / Atom feed
From: <jerinj@marvell.com>
To: <dev@dpdk.org>, Pavan Nikhilesh <pbhagavatula@marvell.com>,
	Jerin Jacob <jerinj@marvell.com>,
	Nithin Dabilpuram <ndabilpuram@marvell.com>,
	"Vamsi Attunuru" <vattunuru@marvell.com>,
	Kiran Kumar K <kirankumark@marvell.com>,
	Satha Rao <skoteshwar@marvell.com>
Cc: <thomas@monjalon.net>, <david.marchand@redhat.com>,
	<anatoly.burakov@intel.com>
Subject: [dpdk-dev] [PATCH v2 3/4] eal: change RTE_PCI_DRV_IOVA_AS_VA flag name
Date: Tue, 16 Jul 2019 19:16:08 +0530	[thread overview]
Message-ID: <20190716134609.40930-4-jerinj@marvell.com> (raw)
In-Reply-To: <20190716134609.40930-1-jerinj@marvell.com>

From: Jerin Jacob <jerinj@marvell.com>

In order to align name with other PCI driver flag such as
RTE_PCI_DRV_NEED_MAPPING and to reflect its purpose, Change
RTE_PCI_DRV_IOVA_AS_VA flag name as RTE_PCI_DRV_NEED_IOVA_AS_VA.

Signed-off-by: Jerin Jacob <jerinj@marvell.com>
---
 drivers/bus/pci/linux/pci.c                 | 4 ++--
 drivers/bus/pci/rte_bus_pci.h               | 4 ++--
 drivers/event/octeontx/timvf_probe.c        | 2 +-
 drivers/event/octeontx2/otx2_evdev.c        | 2 +-
 drivers/mempool/octeontx/octeontx_fpavf.c   | 2 +-
 drivers/mempool/octeontx2/otx2_mempool.c    | 2 +-
 drivers/net/octeontx2/otx2_ethdev.c         | 2 +-
 drivers/raw/octeontx2_dma/otx2_dpi_rawdev.c | 2 +-
 8 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/bus/pci/linux/pci.c b/drivers/bus/pci/linux/pci.c
index 1a2f99b32..1d8d20d93 100644
--- a/drivers/bus/pci/linux/pci.c
+++ b/drivers/bus/pci/linux/pci.c
@@ -580,7 +580,7 @@ pci_device_iova_mode(const struct rte_pci_driver *pdrv,
 		}
 		if (is_vfio_noiommu_enabled != 0)
 			iova_mode = RTE_IOVA_PA;
-		else if ((pdrv->drv_flags & RTE_PCI_DRV_IOVA_AS_VA) != 0)
+		else if ((pdrv->drv_flags & RTE_PCI_DRV_NEED_IOVA_AS_VA) != 0)
 			iova_mode = RTE_IOVA_VA;
 #endif
 		break;
@@ -592,7 +592,7 @@ pci_device_iova_mode(const struct rte_pci_driver *pdrv,
 		break;
 
 	default:
-		if ((pdrv->drv_flags & RTE_PCI_DRV_IOVA_AS_VA) != 0)
+		if ((pdrv->drv_flags & RTE_PCI_DRV_NEED_IOVA_AS_VA) != 0)
 			iova_mode = RTE_IOVA_VA;
 		break;
 	}
diff --git a/drivers/bus/pci/rte_bus_pci.h b/drivers/bus/pci/rte_bus_pci.h
index 0f2177564..29bea6d70 100644
--- a/drivers/bus/pci/rte_bus_pci.h
+++ b/drivers/bus/pci/rte_bus_pci.h
@@ -187,8 +187,8 @@ struct rte_pci_bus {
 #define RTE_PCI_DRV_INTR_RMV 0x0010
 /** Device driver needs to keep mapped resources if unsupported dev detected */
 #define RTE_PCI_DRV_KEEP_MAPPED_RES 0x0020
-/** Device driver only supports IOVA as VA and cannot work with IOVA as PA */
-#define RTE_PCI_DRV_IOVA_AS_VA 0x0040
+/** Device driver needs IOVA as VA and cannot work with IOVA as PA */
+#define RTE_PCI_DRV_NEED_IOVA_AS_VA 0x0040
 
 /**
  * Map the PCI device resources in user space virtual memory address
diff --git a/drivers/event/octeontx/timvf_probe.c b/drivers/event/octeontx/timvf_probe.c
index 08dbd2be9..af87625fd 100644
--- a/drivers/event/octeontx/timvf_probe.c
+++ b/drivers/event/octeontx/timvf_probe.c
@@ -140,7 +140,7 @@ static const struct rte_pci_id pci_timvf_map[] = {
 
 static struct rte_pci_driver pci_timvf = {
 	.id_table = pci_timvf_map,
-	.drv_flags = RTE_PCI_DRV_NEED_MAPPING | RTE_PCI_DRV_IOVA_AS_VA,
+	.drv_flags = RTE_PCI_DRV_NEED_MAPPING | RTE_PCI_DRV_NEED_IOVA_AS_VA,
 	.probe = timvf_probe,
 	.remove = NULL,
 };
diff --git a/drivers/event/octeontx2/otx2_evdev.c b/drivers/event/octeontx2/otx2_evdev.c
index 56716c2ac..e6379e3b4 100644
--- a/drivers/event/octeontx2/otx2_evdev.c
+++ b/drivers/event/octeontx2/otx2_evdev.c
@@ -1630,7 +1630,7 @@ static const struct rte_pci_id pci_sso_map[] = {
 
 static struct rte_pci_driver pci_sso = {
 	.id_table = pci_sso_map,
-	.drv_flags = RTE_PCI_DRV_NEED_MAPPING | RTE_PCI_DRV_IOVA_AS_VA,
+	.drv_flags = RTE_PCI_DRV_NEED_MAPPING | RTE_PCI_DRV_NEED_IOVA_AS_VA,
 	.probe = otx2_sso_probe,
 	.remove = otx2_sso_remove,
 };
diff --git a/drivers/mempool/octeontx/octeontx_fpavf.c b/drivers/mempool/octeontx/octeontx_fpavf.c
index 4cf387e8f..baabc0152 100644
--- a/drivers/mempool/octeontx/octeontx_fpavf.c
+++ b/drivers/mempool/octeontx/octeontx_fpavf.c
@@ -799,7 +799,7 @@ static const struct rte_pci_id pci_fpavf_map[] = {
 
 static struct rte_pci_driver pci_fpavf = {
 	.id_table = pci_fpavf_map,
-	.drv_flags = RTE_PCI_DRV_NEED_MAPPING | RTE_PCI_DRV_IOVA_AS_VA,
+	.drv_flags = RTE_PCI_DRV_NEED_MAPPING | RTE_PCI_DRV_NEED_IOVA_AS_VA,
 	.probe = fpavf_probe,
 };
 
diff --git a/drivers/mempool/octeontx2/otx2_mempool.c b/drivers/mempool/octeontx2/otx2_mempool.c
index 9a5f11cf4..3a4a9425f 100644
--- a/drivers/mempool/octeontx2/otx2_mempool.c
+++ b/drivers/mempool/octeontx2/otx2_mempool.c
@@ -443,7 +443,7 @@ static const struct rte_pci_id pci_npa_map[] = {
 
 static struct rte_pci_driver pci_npa = {
 	.id_table = pci_npa_map,
-	.drv_flags = RTE_PCI_DRV_NEED_MAPPING | RTE_PCI_DRV_IOVA_AS_VA,
+	.drv_flags = RTE_PCI_DRV_NEED_MAPPING | RTE_PCI_DRV_NEED_IOVA_AS_VA,
 	.probe = npa_probe,
 	.remove = npa_remove,
 };
diff --git a/drivers/net/octeontx2/otx2_ethdev.c b/drivers/net/octeontx2/otx2_ethdev.c
index 5ec55511b..7b91f6b31 100644
--- a/drivers/net/octeontx2/otx2_ethdev.c
+++ b/drivers/net/octeontx2/otx2_ethdev.c
@@ -2001,7 +2001,7 @@ static const struct rte_pci_id pci_nix_map[] = {
 
 static struct rte_pci_driver pci_nix = {
 	.id_table = pci_nix_map,
-	.drv_flags = RTE_PCI_DRV_NEED_MAPPING | RTE_PCI_DRV_IOVA_AS_VA |
+	.drv_flags = RTE_PCI_DRV_NEED_MAPPING | RTE_PCI_DRV_NEED_IOVA_AS_VA |
 			RTE_PCI_DRV_INTR_LSC,
 	.probe = nix_probe,
 	.remove = nix_remove,
diff --git a/drivers/raw/octeontx2_dma/otx2_dpi_rawdev.c b/drivers/raw/octeontx2_dma/otx2_dpi_rawdev.c
index 6a1b43678..e398abb75 100644
--- a/drivers/raw/octeontx2_dma/otx2_dpi_rawdev.c
+++ b/drivers/raw/octeontx2_dma/otx2_dpi_rawdev.c
@@ -427,7 +427,7 @@ otx2_dpi_rawdev_remove(struct rte_pci_device *pci_dev)
 
 static struct rte_pci_driver rte_dpi_rawdev_pmd = {
 	.id_table  = pci_dma_map,
-	.drv_flags = RTE_PCI_DRV_NEED_MAPPING | RTE_PCI_DRV_IOVA_AS_VA,
+	.drv_flags = RTE_PCI_DRV_NEED_MAPPING | RTE_PCI_DRV_NEED_IOVA_AS_VA,
 	.probe     = otx2_dpi_rawdev_probe,
 	.remove    = otx2_dpi_rawdev_remove,
 };
-- 
2.22.0


  parent reply	other threads:[~2019-07-16 13:46 UTC|newest]

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-10 21:48 [dpdk-dev] [PATCH 0/2] Fixes on IOVA mode selection David Marchand
2019-07-10 21:48 ` [dpdk-dev] [PATCH 1/2] Revert "bus/pci: add Mellanox kernel driver type" David Marchand
2019-07-16 10:37   ` [dpdk-dev] [EXT] " Jerin Jacob Kollanukkaran
2019-07-10 21:48 ` [dpdk-dev] [PATCH 2/2] eal: fix IOVA mode selection as VA for pci drivers David Marchand
2019-07-11 14:40   ` Thomas Monjalon
2019-07-12  8:05     ` Jerin Jacob Kollanukkaran
2019-07-12 11:03   ` Burakov, Anatoly
2019-07-12 12:43     ` Thomas Monjalon
2019-07-12 12:58       ` Burakov, Anatoly
2019-07-12 13:19         ` Bruce Richardson
2019-07-15 14:26       ` Jerin Jacob Kollanukkaran
2019-07-15 15:03         ` Thomas Monjalon
2019-07-15 15:35           ` Jerin Jacob Kollanukkaran
2019-07-15 16:06             ` Thomas Monjalon
2019-07-15 16:27               ` Jerin Jacob Kollanukkaran
2019-07-16 13:46 ` [dpdk-dev] [PATCH v2 0/4] Fixes on IOVA mode selection jerinj
2019-07-16 13:46   ` [dpdk-dev] [PATCH v2 1/4] Revert "bus/pci: add Mellanox kernel driver type" jerinj
2019-07-16 13:46   ` [dpdk-dev] [PATCH v2 2/4] eal: fix IOVA mode selection as VA for pci drivers jerinj
2019-07-16 14:26     ` Burakov, Anatoly
2019-07-16 15:07       ` Jerin Jacob Kollanukkaran
2019-07-16 13:46   ` jerinj [this message]
2019-07-16 13:46   ` [dpdk-dev] [PATCH v2 4/4] eal: select IOVA mode as VA for default case jerinj
2019-07-16 14:33     ` Burakov, Anatoly
2019-07-17  8:33       ` [dpdk-dev] [EXT] " Jerin Jacob Kollanukkaran
2019-07-17 12:38         ` Burakov, Anatoly
2019-07-17 14:04           ` Jerin Jacob Kollanukkaran
2019-07-18  6:45   ` [dpdk-dev] [PATCH v3 0/4] Fixes on IOVA mode selection jerinj
2019-07-18  6:45     ` [dpdk-dev] [PATCH v3 1/4] Revert "bus/pci: add Mellanox kernel driver type" jerinj
2019-07-18  6:45     ` [dpdk-dev] [PATCH v3 2/4] eal: fix IOVA mode selection as VA for pci drivers jerinj
2019-07-18  6:45     ` [dpdk-dev] [PATCH v3 3/4] eal: change RTE_PCI_DRV_IOVA_AS_VA flag name jerinj
2019-07-18  6:45     ` [dpdk-dev] [PATCH v3 4/4] eal: select IOVA mode as VA for default case jerinj
2019-07-22 11:28     ` [dpdk-dev] [PATCH v3 0/4] Fixes on IOVA mode selection David Marchand
2019-07-22 12:56 ` [dpdk-dev] [PATCH v4 " David Marchand
2019-07-22 12:56   ` [dpdk-dev] [PATCH v4 1/4] Revert "bus/pci: add Mellanox kernel driver type" David Marchand
2019-07-22 12:56   ` [dpdk-dev] [PATCH v4 2/4] eal: fix IOVA mode selection as VA for PCI drivers David Marchand
2019-11-25  9:33     ` Ferruh Yigit
2019-11-25 10:22       ` Thomas Monjalon
2019-11-25 12:03         ` Ferruh Yigit
2019-11-25 12:36           ` David Marchand
2019-11-25 12:58             ` Burakov, Anatoly
2019-11-25 14:29               ` Thomas Monjalon
2019-11-25 11:07       ` Jerin Jacob
2019-07-22 12:56   ` [dpdk-dev] [PATCH v4 3/4] drivers: change IOVA as VA PCI flag name David Marchand
2019-07-22 12:56   ` [dpdk-dev] [PATCH v4 4/4] eal: select IOVA as VA mode for default case David Marchand
2019-07-22 15:53   ` [dpdk-dev] [PATCH v4 0/4] Fixes on IOVA mode selection Thomas Monjalon
2019-07-23  3:35     ` Stojaczyk, Dariusz
2019-07-23  4:18       ` Jerin Jacob Kollanukkaran
2019-07-23  4:54         ` Stojaczyk, Dariusz
2019-07-23  5:27           ` Jerin Jacob Kollanukkaran
2019-07-23  7:21             ` Thomas Monjalon
2019-07-23  9:57             ` Burakov, Anatoly
2019-07-23 10:25               ` Thomas Monjalon
2019-07-23 13:56                 ` Burakov, Anatoly
2019-07-23 14:24                   ` [dpdk-dev] [EXT] " Jerin Jacob Kollanukkaran
2019-07-23 14:29                   ` [dpdk-dev] " Burakov, Anatoly
2019-07-23 14:36                     ` [dpdk-dev] [EXT] " Jerin Jacob Kollanukkaran
2019-07-23 15:47                       ` Burakov, Anatoly

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190716134609.40930-4-jerinj@marvell.com \
    --to=jerinj@marvell.com \
    --cc=anatoly.burakov@intel.com \
    --cc=david.marchand@redhat.com \
    --cc=dev@dpdk.org \
    --cc=kirankumark@marvell.com \
    --cc=ndabilpuram@marvell.com \
    --cc=pbhagavatula@marvell.com \
    --cc=skoteshwar@marvell.com \
    --cc=thomas@monjalon.net \
    --cc=vattunuru@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).