DPDK-dev Archive on lore.kernel.org
 help / color / Atom feed
From: Nagadheeraj Rottela <rnagadheeraj@marvell.com>
To: "dev@dpdk.org" <dev@dpdk.org>
Cc: Srikanth Jampala <jsrikanth@marvell.com>,
	Nagadheeraj Rottela <rnagadheeraj@marvell.com>
Subject: [dpdk-dev] [PATCH v2 10/10] test/crypto: add tests for Nitrox PMD
Date: Fri, 19 Jul 2019 12:33:47 +0000
Message-ID: <20190719123309.24417-11-rnagadheeraj@marvell.com> (raw)
In-Reply-To: <20190719123309.24417-1-rnagadheeraj@marvell.com>

Add hmac(sha1), cbc(aes) authenc tests in the test mechanism.

Signed-off-by: Nagadheeraj Rottela <rnagadheeraj@marvell.com>
---
 app/test/test_cryptodev.c                  | 52 ++++++++++++++++++++++++++++++
 app/test/test_cryptodev.h                  |  1 +
 app/test/test_cryptodev_aes_test_vectors.h | 30 +++++++++++------
 app/test/test_cryptodev_blockcipher.c      |  9 +++++-
 app/test/test_cryptodev_blockcipher.h      |  1 +
 5 files changed, 82 insertions(+), 11 deletions(-)

diff --git a/app/test/test_cryptodev.c b/app/test/test_cryptodev.c
index c8221640d..a5cac5f80 100644
--- a/app/test/test_cryptodev.c
+++ b/app/test/test_cryptodev.c
@@ -2331,6 +2331,25 @@ test_3DES_chain_octeontx_all(void)
 }
 
 static int
+test_AES_chain_nitrox_all(void)
+{
+	struct crypto_testsuite_params *ts_params = &testsuite_params;
+	int status;
+
+	status = test_blockcipher_all_tests(ts_params->mbuf_pool,
+		ts_params->op_mpool,
+		ts_params->session_mpool, ts_params->session_priv_mpool,
+		ts_params->valid_devs[0],
+		rte_cryptodev_driver_id_get(
+		RTE_STR(CRYPTODEV_NAME_NITROX_PMD)),
+		BLKCIPHER_AES_CHAIN_TYPE);
+
+	TEST_ASSERT_EQUAL(status, 0, "Test failed");
+
+	return TEST_SUCCESS;
+}
+
+static int
 test_3DES_cipheronly_octeontx_all(void)
 {
 	struct crypto_testsuite_params *ts_params = &testsuite_params;
@@ -11962,6 +11981,22 @@ static struct unit_test_suite cryptodev_octeontx_testsuite  = {
 	}
 };
 
+static struct unit_test_suite cryptodev_nitrox_testsuite  = {
+	.suite_name = "Crypto NITROX Unit Test Suite",
+	.setup = testsuite_setup,
+	.teardown = testsuite_teardown,
+	.unit_test_cases = {
+		TEST_CASE_ST(ut_setup, ut_teardown,
+			     test_device_configure_invalid_dev_id),
+		TEST_CASE_ST(ut_setup, ut_teardown,
+				test_device_configure_invalid_queue_pair_ids),
+		TEST_CASE_ST(ut_setup, ut_teardown,
+			     test_AES_chain_nitrox_all),
+
+		TEST_CASES_END() /**< NULL terminate unit test array */
+	}
+};
+
 static int
 test_cryptodev_qat(void /*argv __rte_unused, int argc __rte_unused*/)
 {
@@ -12245,6 +12280,22 @@ test_cryptodev_caam_jr(void /*argv __rte_unused, int argc __rte_unused*/)
 	return unit_test_suite_runner(&cryptodev_caam_jr_testsuite);
 }
 
+static int
+test_cryptodev_nitrox(void)
+{
+	gbl_driver_id =	rte_cryptodev_driver_id_get(
+			RTE_STR(CRYPTODEV_NAME_NITROX_PMD));
+
+	if (gbl_driver_id == -1) {
+		RTE_LOG(ERR, USER1, "NITROX PMD must be loaded. Check if "
+				"CONFIG_RTE_LIBRTE_PMD_NITROX is enabled "
+				"in config file to run this testsuite.\n");
+		return TEST_FAILED;
+	}
+
+	return unit_test_suite_runner(&cryptodev_nitrox_testsuite);
+}
+
 REGISTER_TEST_COMMAND(cryptodev_qat_autotest, test_cryptodev_qat);
 REGISTER_TEST_COMMAND(cryptodev_aesni_mb_autotest, test_cryptodev_aesni_mb);
 REGISTER_TEST_COMMAND(cryptodev_openssl_autotest, test_cryptodev_openssl);
@@ -12261,3 +12312,4 @@ REGISTER_TEST_COMMAND(cryptodev_ccp_autotest, test_cryptodev_ccp);
 REGISTER_TEST_COMMAND(cryptodev_virtio_autotest, test_cryptodev_virtio);
 REGISTER_TEST_COMMAND(cryptodev_octeontx_autotest, test_cryptodev_octeontx);
 REGISTER_TEST_COMMAND(cryptodev_caam_jr_autotest, test_cryptodev_caam_jr);
+REGISTER_TEST_COMMAND(cryptodev_nitrox_autotest, test_cryptodev_nitrox);
diff --git a/app/test/test_cryptodev.h b/app/test/test_cryptodev.h
index 14b54dcb6..afcdaf03f 100644
--- a/app/test/test_cryptodev.h
+++ b/app/test/test_cryptodev.h
@@ -67,6 +67,7 @@
 #define CRYPTODEV_NAME_VIRTIO_PMD	crypto_virtio
 #define CRYPTODEV_NAME_OCTEONTX_SYM_PMD	crypto_octeontx
 #define CRYPTODEV_NAME_CAAM_JR_PMD	crypto_caam_jr
+#define CRYPTODEV_NAME_NITROX_PMD	crypto_nitrox
 
 /**
  * Write (spread) data from buffer to mbuf data
diff --git a/app/test/test_cryptodev_aes_test_vectors.h b/app/test/test_cryptodev_aes_test_vectors.h
index ee4fdc9a7..476459b66 100644
--- a/app/test/test_cryptodev_aes_test_vectors.h
+++ b/app/test/test_cryptodev_aes_test_vectors.h
@@ -1537,7 +1537,8 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
 		.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
 		.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
 		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
-			BLOCKCIPHER_TEST_TARGET_PMD_QAT
+			BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+			BLOCKCIPHER_TEST_TARGET_PMD_NITROX
 	},
 		{
 		.test_descr = "AES-128-CTR HMAC-SHA1 Encryption Digest",
@@ -1638,7 +1639,8 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
 			BLOCKCIPHER_TEST_TARGET_PMD_CAAM_JR |
 			BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
 			BLOCKCIPHER_TEST_TARGET_PMD_CCP |
-			BLOCKCIPHER_TEST_TARGET_PMD_OCTEONTX
+			BLOCKCIPHER_TEST_TARGET_PMD_OCTEONTX |
+			BLOCKCIPHER_TEST_TARGET_PMD_NITROX
 	},
 	{
 		.test_descr = "AES-128-CBC HMAC-SHA1 Encryption Digest "
@@ -1647,7 +1649,8 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
 		.op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
 		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_ARMV8 |
 			BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
-			BLOCKCIPHER_TEST_TARGET_PMD_OCTEONTX
+			BLOCKCIPHER_TEST_TARGET_PMD_OCTEONTX |
+			BLOCKCIPHER_TEST_TARGET_PMD_NITROX
 	},
 	{
 		.test_descr = "AES-128-CBC HMAC-SHA1 Encryption Digest "
@@ -1663,7 +1666,8 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
 			BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
 			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
 			BLOCKCIPHER_TEST_TARGET_PMD_CAAM_JR |
-			BLOCKCIPHER_TEST_TARGET_PMD_OCTEONTX
+			BLOCKCIPHER_TEST_TARGET_PMD_OCTEONTX |
+			BLOCKCIPHER_TEST_TARGET_PMD_NITROX
 	},
 	{
 		.test_descr = "AES-128-CBC HMAC-SHA1 Decryption Digest "
@@ -1680,7 +1684,8 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
 			BLOCKCIPHER_TEST_TARGET_PMD_CAAM_JR |
 			BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
 			BLOCKCIPHER_TEST_TARGET_PMD_CCP |
-			BLOCKCIPHER_TEST_TARGET_PMD_OCTEONTX
+			BLOCKCIPHER_TEST_TARGET_PMD_OCTEONTX |
+			BLOCKCIPHER_TEST_TARGET_PMD_NITROX
 	},
 	{
 		.test_descr = "AES-128-CBC HMAC-SHA1 Decryption Digest "
@@ -1691,7 +1696,8 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
 		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
 			    BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
 			    BLOCKCIPHER_TEST_TARGET_PMD_CAAM_JR |
-			    BLOCKCIPHER_TEST_TARGET_PMD_OCTEONTX
+			    BLOCKCIPHER_TEST_TARGET_PMD_OCTEONTX |
+			    BLOCKCIPHER_TEST_TARGET_PMD_NITROX
 	},
 	{
 		.test_descr = "AES-128-CBC HMAC-SHA1 Decryption Digest "
@@ -1700,7 +1706,8 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
 		.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
 		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_ARMV8 |
 			BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
-			BLOCKCIPHER_TEST_TARGET_PMD_OCTEONTX
+			BLOCKCIPHER_TEST_TARGET_PMD_OCTEONTX |
+			BLOCKCIPHER_TEST_TARGET_PMD_NITROX
 	},
 	{
 		.test_descr = "AES-128-CBC HMAC-SHA256 Encryption Digest",
@@ -1850,7 +1857,8 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
 			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
 			BLOCKCIPHER_TEST_TARGET_PMD_CAAM_JR |
 			BLOCKCIPHER_TEST_TARGET_PMD_MB |
-			BLOCKCIPHER_TEST_TARGET_PMD_OCTEONTX
+			BLOCKCIPHER_TEST_TARGET_PMD_OCTEONTX |
+			BLOCKCIPHER_TEST_TARGET_PMD_NITROX
 	},
 	{
 		.test_descr = "AES-128-CBC HMAC-SHA1 Encryption Digest "
@@ -1859,7 +1867,8 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
 		.op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
 		.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
 		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
-			BLOCKCIPHER_TEST_TARGET_PMD_QAT
+			BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+			BLOCKCIPHER_TEST_TARGET_PMD_NITROX
 	},
 	{
 		.test_descr = "AES-128-CBC HMAC-SHA1 Decryption Digest "
@@ -1874,7 +1883,8 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
 			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
 			BLOCKCIPHER_TEST_TARGET_PMD_CAAM_JR |
 			BLOCKCIPHER_TEST_TARGET_PMD_OCTEONTX |
-			BLOCKCIPHER_TEST_TARGET_PMD_MB
+			BLOCKCIPHER_TEST_TARGET_PMD_MB |
+			BLOCKCIPHER_TEST_TARGET_PMD_NITROX
 	},
 	{
 		.test_descr = "AES-128-CBC HMAC-SHA224 Encryption Digest",
diff --git a/app/test/test_cryptodev_blockcipher.c b/app/test/test_cryptodev_blockcipher.c
index b8dcc3962..885a20e8f 100644
--- a/app/test/test_cryptodev_blockcipher.c
+++ b/app/test/test_cryptodev_blockcipher.c
@@ -79,6 +79,8 @@ test_blockcipher_one_case(const struct blockcipher_test_case *t,
 			RTE_STR(CRYPTODEV_NAME_OCTEONTX_SYM_PMD));
 	int null_pmd = rte_cryptodev_driver_id_get(
 				RTE_STR(CRYPTODEV_NAME_NULL_PMD));
+	int nitrox_pmd = rte_cryptodev_driver_id_get(
+			RTE_STR(CRYPTODEV_NAME_NITROX_PMD));
 
 	int nb_segs = 1;
 	uint32_t nb_iterates = 0;
@@ -125,7 +127,8 @@ test_blockcipher_one_case(const struct blockcipher_test_case *t,
 			driver_id == ccp_pmd ||
 			driver_id == virtio_pmd ||
 			driver_id == octeontx_pmd ||
-			driver_id == null_pmd) { /* Fall through */
+			driver_id == null_pmd ||
+			driver_id == nitrox_pmd) { /* Fall through */
 		digest_len = tdata->digest.len;
 	} else if (driver_id == aesni_mb_pmd ||
 			driver_id == scheduler_pmd) {
@@ -717,6 +720,8 @@ test_blockcipher_all_tests(struct rte_mempool *mbuf_pool,
 			RTE_STR(CRYPTODEV_NAME_OCTEONTX_SYM_PMD));
 	int null_pmd = rte_cryptodev_driver_id_get(
 				RTE_STR(CRYPTODEV_NAME_NULL_PMD));
+	int nitrox_pmd = rte_cryptodev_driver_id_get(
+			RTE_STR(CRYPTODEV_NAME_NITROX_PMD));
 
 	switch (test_type) {
 	case BLKCIPHER_AES_CHAIN_TYPE:
@@ -789,6 +794,8 @@ test_blockcipher_all_tests(struct rte_mempool *mbuf_pool,
 		target_pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OCTEONTX;
 	else if (driver_id == null_pmd)
 		target_pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_NULL;
+	else if (driver_id == nitrox_pmd)
+		target_pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_NITROX;
 	else
 		TEST_ASSERT(0, "Unrecognized cryptodev type");
 
diff --git a/app/test/test_cryptodev_blockcipher.h b/app/test/test_cryptodev_blockcipher.h
index 3d4b97533..1a65cdab3 100644
--- a/app/test/test_cryptodev_blockcipher.h
+++ b/app/test/test_cryptodev_blockcipher.h
@@ -32,6 +32,7 @@
 #define BLOCKCIPHER_TEST_TARGET_PMD_CAAM_JR	0x0400 /* CAAM_JR flag */
 #define BLOCKCIPHER_TEST_TARGET_PMD_CCP		0x0800 /* CCP flag */
 #define BLOCKCIPHER_TEST_TARGET_PMD_NULL	0x1000 /* NULL flag */
+#define BLOCKCIPHER_TEST_TARGET_PMD_NITROX	0x2000 /* NITROX flag */
 
 #define BLOCKCIPHER_TEST_OP_CIPHER	(BLOCKCIPHER_TEST_OP_ENCRYPT | \
 					BLOCKCIPHER_TEST_OP_DECRYPT)
-- 
2.13.6


  parent reply index

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-17  5:29 [dpdk-dev] [PATCH 00/10] add Nitrox crypto device support Nagadheeraj Rottela
2019-07-17  5:29 ` [dpdk-dev] [PATCH 01/10] crypto/nitrox: add Nitrox build and doc skeleton Nagadheeraj Rottela
2019-07-17  5:29 ` [dpdk-dev] [PATCH 02/10] crypto/nitrox: add PCI probe and remove routines Nagadheeraj Rottela
2019-07-17  5:29 ` [dpdk-dev] [PATCH 03/10] crypto/nitrox: create Nitrox symmetric cryptodev Nagadheeraj Rottela
2019-07-17  5:29 ` [dpdk-dev] [PATCH 04/10] crypto/nitrox: add basic symmetric cryptodev operations Nagadheeraj Rottela
2019-07-17  5:29 ` [dpdk-dev] [PATCH 05/10] crypto/nitrox: add software queue management functionality Nagadheeraj Rottela
2019-07-17  5:29 ` [dpdk-dev] [PATCH 06/10] crypto/nitrox: add hardware " Nagadheeraj Rottela
2019-07-17  5:29 ` [dpdk-dev] [PATCH 07/10] crypto/nitrox: add session management operations Nagadheeraj Rottela
2019-07-17  5:29 ` [dpdk-dev] [PATCH 08/10] crypto/nitrox: add burst enqueue and dequeue operations Nagadheeraj Rottela
2019-07-17 14:16   ` Aaron Conole
2019-07-17  5:29 ` [dpdk-dev] [PATCH 09/10] crypto/nitrox: add cipher auth crypto chain processing Nagadheeraj Rottela
2019-07-17  5:29 ` [dpdk-dev] [PATCH 10/10] test/crypto: add tests for Nitrox PMD Nagadheeraj Rottela
2019-07-19 12:33 ` [dpdk-dev] [PATCH v2 00/10] add Nitrox crypto device support Nagadheeraj Rottela
2019-07-19 12:33   ` [dpdk-dev] [PATCH v2 01/10] crypto/nitrox: add Nitrox build and doc skeleton Nagadheeraj Rottela
2019-07-19 12:33   ` [dpdk-dev] [PATCH v2 02/10] crypto/nitrox: add PCI probe and remove routines Nagadheeraj Rottela
2019-07-19 12:33   ` [dpdk-dev] [PATCH v2 03/10] crypto/nitrox: create Nitrox symmetric cryptodev Nagadheeraj Rottela
2019-07-19 12:33   ` [dpdk-dev] [PATCH v2 04/10] crypto/nitrox: add basic symmetric cryptodev operations Nagadheeraj Rottela
2019-07-19 12:33   ` [dpdk-dev] [PATCH v2 05/10] crypto/nitrox: add software queue management functionality Nagadheeraj Rottela
2019-07-19 12:33   ` [dpdk-dev] [PATCH v2 06/10] crypto/nitrox: add hardware " Nagadheeraj Rottela
2019-07-19 12:33   ` [dpdk-dev] [PATCH v2 07/10] crypto/nitrox: add session management operations Nagadheeraj Rottela
2019-07-19 12:33   ` [dpdk-dev] [PATCH v2 08/10] crypto/nitrox: add burst enqueue and dequeue operations Nagadheeraj Rottela
2019-07-19 12:33   ` [dpdk-dev] [PATCH v2 09/10] crypto/nitrox: add cipher auth crypto chain processing Nagadheeraj Rottela
2019-07-19 12:33   ` Nagadheeraj Rottela [this message]
2019-08-23 10:42 ` [dpdk-dev] [PATCH v3 00/11] add Nitrox crypto device support Nagadheeraj Rottela
2019-08-23 10:42   ` [dpdk-dev] [PATCH v3 01/11] crypto/nitrox: add Nitrox build and doc skeleton Nagadheeraj Rottela
2019-08-23 10:42   ` [dpdk-dev] [PATCH v3 02/11] crypto/nitrox: add PCI probe and remove routines Nagadheeraj Rottela
2019-08-23 10:42   ` [dpdk-dev] [PATCH v3 03/11] crypto/nitrox: create Nitrox symmetric cryptodev Nagadheeraj Rottela
2019-08-23 10:42   ` [dpdk-dev] [PATCH v3 04/11] crypto/nitrox: add basic symmetric cryptodev operations Nagadheeraj Rottela
2019-08-23 10:42   ` [dpdk-dev] [PATCH v3 05/11] crypto/nitrox: add software queue management functionality Nagadheeraj Rottela
2019-08-23 10:42   ` [dpdk-dev] [PATCH v3 06/11] crypto/nitrox: add hardware " Nagadheeraj Rottela
2019-08-23 10:42   ` [dpdk-dev] [PATCH v3 07/11] crypto/nitrox: add session management operations Nagadheeraj Rottela
2019-08-23 10:42   ` [dpdk-dev] [PATCH v3 08/11] crypto/nitrox: add burst enqueue and dequeue operations Nagadheeraj Rottela
2019-08-25 20:55     ` Mattias Rönnblom
2019-08-26 12:49       ` [dpdk-dev] [PATCH v4 00/11] add Nitrox crypto device support Nagadheeraj Rottela
2019-08-26 12:49         ` [dpdk-dev] [PATCH v4 01/11] crypto/nitrox: add Nitrox build and doc skeleton Nagadheeraj Rottela
2019-08-26 12:49         ` [dpdk-dev] [PATCH v4 02/11] crypto/nitrox: add PCI probe and remove routines Nagadheeraj Rottela
2019-08-26 12:49         ` [dpdk-dev] [PATCH v4 03/11] crypto/nitrox: create Nitrox symmetric cryptodev Nagadheeraj Rottela
2019-08-26 12:49         ` [dpdk-dev] [PATCH v4 04/11] crypto/nitrox: add basic symmetric cryptodev operations Nagadheeraj Rottela
2019-08-26 12:49         ` [dpdk-dev] [PATCH v4 05/11] crypto/nitrox: add software queue management functionality Nagadheeraj Rottela
2019-08-26 12:49         ` [dpdk-dev] [PATCH v4 06/11] crypto/nitrox: add hardware " Nagadheeraj Rottela
2019-08-26 12:49         ` [dpdk-dev] [PATCH v4 07/11] crypto/nitrox: add session management operations Nagadheeraj Rottela
2019-08-26 12:49         ` [dpdk-dev] [PATCH v4 08/11] crypto/nitrox: add burst enqueue and dequeue operations Nagadheeraj Rottela
2019-08-26 12:49         ` [dpdk-dev] [PATCH v4 09/11] crypto/nitrox: add cipher auth crypto chain processing Nagadheeraj Rottela
2019-08-26 12:49         ` [dpdk-dev] [PATCH v4 10/11] test/crypto: add tests for Nitrox PMD Nagadheeraj Rottela
2019-08-26 12:49         ` [dpdk-dev] [PATCH v4 11/11] crypto/nitrox: add SHA224 and SHA256 HMAC algorithms Nagadheeraj Rottela
2019-08-23 10:42   ` [dpdk-dev] [PATCH v3 09/11] crypto/nitrox: add cipher auth crypto chain processing Nagadheeraj Rottela
2019-08-23 10:42   ` [dpdk-dev] [PATCH v3 10/11] test/crypto: add tests for Nitrox PMD Nagadheeraj Rottela
2019-08-23 10:42   ` [dpdk-dev] [PATCH v3 11/11] crypto/nitrox: add SHA224 and SHA256 HMAC algorithms Nagadheeraj Rottela

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190719123309.24417-11-rnagadheeraj@marvell.com \
    --to=rnagadheeraj@marvell.com \
    --cc=dev@dpdk.org \
    --cc=jsrikanth@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK-dev Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/dpdk-dev/0 dpdk-dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dpdk-dev dpdk-dev/ https://lore.kernel.org/dpdk-dev \
		dev@dpdk.org dpdk-dev@archiver.kernel.org
	public-inbox-index dpdk-dev


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/ public-inbox