From: Nagadheeraj Rottela <rnagadheeraj@marvell.com>
To: "akhil.goyal@nxp.com" <akhil.goyal@nxp.com>,
"pablo.de.lara.guarch@intel.com" <pablo.de.lara.guarch@intel.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>,
Srikanth Jampala <jsrikanth@marvell.com>,
Nagadheeraj Rottela <rnagadheeraj@marvell.com>
Subject: [dpdk-dev] [PATCH v3 10/11] test/crypto: add tests for Nitrox PMD
Date: Fri, 23 Aug 2019 10:42:25 +0000
Message-ID: <20190823104144.19300-11-rnagadheeraj@marvell.com> (raw)
In-Reply-To: <20190823104144.19300-1-rnagadheeraj@marvell.com>
Add hmac(sha1), cbc(aes) authenc tests in the test mechanism.
Signed-off-by: Nagadheeraj Rottela <rnagadheeraj@marvell.com>
---
app/test/test_cryptodev.c | 52 ++++++++++++++++++++++++++++++
app/test/test_cryptodev.h | 1 +
app/test/test_cryptodev_aes_test_vectors.h | 30 +++++++++++------
app/test/test_cryptodev_blockcipher.c | 9 +++++-
app/test/test_cryptodev_blockcipher.h | 1 +
5 files changed, 82 insertions(+), 11 deletions(-)
diff --git a/app/test/test_cryptodev.c b/app/test/test_cryptodev.c
index 4197febb0..ed70c3f30 100644
--- a/app/test/test_cryptodev.c
+++ b/app/test/test_cryptodev.c
@@ -2331,6 +2331,25 @@ test_3DES_chain_octeontx_all(void)
}
static int
+test_AES_chain_nitrox_all(void)
+{
+ struct crypto_testsuite_params *ts_params = &testsuite_params;
+ int status;
+
+ status = test_blockcipher_all_tests(ts_params->mbuf_pool,
+ ts_params->op_mpool,
+ ts_params->session_mpool, ts_params->session_priv_mpool,
+ ts_params->valid_devs[0],
+ rte_cryptodev_driver_id_get(
+ RTE_STR(CRYPTODEV_NAME_NITROX_PMD)),
+ BLKCIPHER_AES_CHAIN_TYPE);
+
+ TEST_ASSERT_EQUAL(status, 0, "Test failed");
+
+ return TEST_SUCCESS;
+}
+
+static int
test_3DES_cipheronly_octeontx_all(void)
{
struct crypto_testsuite_params *ts_params = &testsuite_params;
@@ -11969,6 +11988,22 @@ static struct unit_test_suite cryptodev_octeontx_testsuite = {
}
};
+static struct unit_test_suite cryptodev_nitrox_testsuite = {
+ .suite_name = "Crypto NITROX Unit Test Suite",
+ .setup = testsuite_setup,
+ .teardown = testsuite_teardown,
+ .unit_test_cases = {
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_device_configure_invalid_dev_id),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_device_configure_invalid_queue_pair_ids),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_AES_chain_nitrox_all),
+
+ TEST_CASES_END() /**< NULL terminate unit test array */
+ }
+};
+
static int
test_cryptodev_qat(void /*argv __rte_unused, int argc __rte_unused*/)
{
@@ -12252,6 +12287,22 @@ test_cryptodev_caam_jr(void /*argv __rte_unused, int argc __rte_unused*/)
return unit_test_suite_runner(&cryptodev_caam_jr_testsuite);
}
+static int
+test_cryptodev_nitrox(void)
+{
+ gbl_driver_id = rte_cryptodev_driver_id_get(
+ RTE_STR(CRYPTODEV_NAME_NITROX_PMD));
+
+ if (gbl_driver_id == -1) {
+ RTE_LOG(ERR, USER1, "NITROX PMD must be loaded. Check if "
+ "CONFIG_RTE_LIBRTE_PMD_NITROX is enabled "
+ "in config file to run this testsuite.\n");
+ return TEST_FAILED;
+ }
+
+ return unit_test_suite_runner(&cryptodev_nitrox_testsuite);
+}
+
REGISTER_TEST_COMMAND(cryptodev_qat_autotest, test_cryptodev_qat);
REGISTER_TEST_COMMAND(cryptodev_aesni_mb_autotest, test_cryptodev_aesni_mb);
REGISTER_TEST_COMMAND(cryptodev_openssl_autotest, test_cryptodev_openssl);
@@ -12268,3 +12319,4 @@ REGISTER_TEST_COMMAND(cryptodev_ccp_autotest, test_cryptodev_ccp);
REGISTER_TEST_COMMAND(cryptodev_virtio_autotest, test_cryptodev_virtio);
REGISTER_TEST_COMMAND(cryptodev_octeontx_autotest, test_cryptodev_octeontx);
REGISTER_TEST_COMMAND(cryptodev_caam_jr_autotest, test_cryptodev_caam_jr);
+REGISTER_TEST_COMMAND(cryptodev_nitrox_autotest, test_cryptodev_nitrox);
diff --git a/app/test/test_cryptodev.h b/app/test/test_cryptodev.h
index 14b54dcb6..afcdaf03f 100644
--- a/app/test/test_cryptodev.h
+++ b/app/test/test_cryptodev.h
@@ -67,6 +67,7 @@
#define CRYPTODEV_NAME_VIRTIO_PMD crypto_virtio
#define CRYPTODEV_NAME_OCTEONTX_SYM_PMD crypto_octeontx
#define CRYPTODEV_NAME_CAAM_JR_PMD crypto_caam_jr
+#define CRYPTODEV_NAME_NITROX_PMD crypto_nitrox
/**
* Write (spread) data from buffer to mbuf data
diff --git a/app/test/test_cryptodev_aes_test_vectors.h b/app/test/test_cryptodev_aes_test_vectors.h
index ee4fdc9a7..476459b66 100644
--- a/app/test/test_cryptodev_aes_test_vectors.h
+++ b/app/test/test_cryptodev_aes_test_vectors.h
@@ -1537,7 +1537,8 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_NITROX
},
{
.test_descr = "AES-128-CTR HMAC-SHA1 Encryption Digest",
@@ -1638,7 +1639,8 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_CAAM_JR |
BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP |
- BLOCKCIPHER_TEST_TARGET_PMD_OCTEONTX
+ BLOCKCIPHER_TEST_TARGET_PMD_OCTEONTX |
+ BLOCKCIPHER_TEST_TARGET_PMD_NITROX
},
{
.test_descr = "AES-128-CBC HMAC-SHA1 Encryption Digest "
@@ -1647,7 +1649,8 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
.op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_ARMV8 |
BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
- BLOCKCIPHER_TEST_TARGET_PMD_OCTEONTX
+ BLOCKCIPHER_TEST_TARGET_PMD_OCTEONTX |
+ BLOCKCIPHER_TEST_TARGET_PMD_NITROX
},
{
.test_descr = "AES-128-CBC HMAC-SHA1 Encryption Digest "
@@ -1663,7 +1666,8 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_CAAM_JR |
- BLOCKCIPHER_TEST_TARGET_PMD_OCTEONTX
+ BLOCKCIPHER_TEST_TARGET_PMD_OCTEONTX |
+ BLOCKCIPHER_TEST_TARGET_PMD_NITROX
},
{
.test_descr = "AES-128-CBC HMAC-SHA1 Decryption Digest "
@@ -1680,7 +1684,8 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_CAAM_JR |
BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
BLOCKCIPHER_TEST_TARGET_PMD_CCP |
- BLOCKCIPHER_TEST_TARGET_PMD_OCTEONTX
+ BLOCKCIPHER_TEST_TARGET_PMD_OCTEONTX |
+ BLOCKCIPHER_TEST_TARGET_PMD_NITROX
},
{
.test_descr = "AES-128-CBC HMAC-SHA1 Decryption Digest "
@@ -1691,7 +1696,8 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_CAAM_JR |
- BLOCKCIPHER_TEST_TARGET_PMD_OCTEONTX
+ BLOCKCIPHER_TEST_TARGET_PMD_OCTEONTX |
+ BLOCKCIPHER_TEST_TARGET_PMD_NITROX
},
{
.test_descr = "AES-128-CBC HMAC-SHA1 Decryption Digest "
@@ -1700,7 +1706,8 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_ARMV8 |
BLOCKCIPHER_TEST_TARGET_PMD_MVSAM |
- BLOCKCIPHER_TEST_TARGET_PMD_OCTEONTX
+ BLOCKCIPHER_TEST_TARGET_PMD_OCTEONTX |
+ BLOCKCIPHER_TEST_TARGET_PMD_NITROX
},
{
.test_descr = "AES-128-CBC HMAC-SHA256 Encryption Digest",
@@ -1850,7 +1857,8 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_CAAM_JR |
BLOCKCIPHER_TEST_TARGET_PMD_MB |
- BLOCKCIPHER_TEST_TARGET_PMD_OCTEONTX
+ BLOCKCIPHER_TEST_TARGET_PMD_OCTEONTX |
+ BLOCKCIPHER_TEST_TARGET_PMD_NITROX
},
{
.test_descr = "AES-128-CBC HMAC-SHA1 Encryption Digest "
@@ -1859,7 +1867,8 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
.op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_NITROX
},
{
.test_descr = "AES-128-CBC HMAC-SHA1 Decryption Digest "
@@ -1874,7 +1883,8 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
BLOCKCIPHER_TEST_TARGET_PMD_CAAM_JR |
BLOCKCIPHER_TEST_TARGET_PMD_OCTEONTX |
- BLOCKCIPHER_TEST_TARGET_PMD_MB
+ BLOCKCIPHER_TEST_TARGET_PMD_MB |
+ BLOCKCIPHER_TEST_TARGET_PMD_NITROX
},
{
.test_descr = "AES-128-CBC HMAC-SHA224 Encryption Digest",
diff --git a/app/test/test_cryptodev_blockcipher.c b/app/test/test_cryptodev_blockcipher.c
index b8dcc3962..885a20e8f 100644
--- a/app/test/test_cryptodev_blockcipher.c
+++ b/app/test/test_cryptodev_blockcipher.c
@@ -79,6 +79,8 @@ test_blockcipher_one_case(const struct blockcipher_test_case *t,
RTE_STR(CRYPTODEV_NAME_OCTEONTX_SYM_PMD));
int null_pmd = rte_cryptodev_driver_id_get(
RTE_STR(CRYPTODEV_NAME_NULL_PMD));
+ int nitrox_pmd = rte_cryptodev_driver_id_get(
+ RTE_STR(CRYPTODEV_NAME_NITROX_PMD));
int nb_segs = 1;
uint32_t nb_iterates = 0;
@@ -125,7 +127,8 @@ test_blockcipher_one_case(const struct blockcipher_test_case *t,
driver_id == ccp_pmd ||
driver_id == virtio_pmd ||
driver_id == octeontx_pmd ||
- driver_id == null_pmd) { /* Fall through */
+ driver_id == null_pmd ||
+ driver_id == nitrox_pmd) { /* Fall through */
digest_len = tdata->digest.len;
} else if (driver_id == aesni_mb_pmd ||
driver_id == scheduler_pmd) {
@@ -717,6 +720,8 @@ test_blockcipher_all_tests(struct rte_mempool *mbuf_pool,
RTE_STR(CRYPTODEV_NAME_OCTEONTX_SYM_PMD));
int null_pmd = rte_cryptodev_driver_id_get(
RTE_STR(CRYPTODEV_NAME_NULL_PMD));
+ int nitrox_pmd = rte_cryptodev_driver_id_get(
+ RTE_STR(CRYPTODEV_NAME_NITROX_PMD));
switch (test_type) {
case BLKCIPHER_AES_CHAIN_TYPE:
@@ -789,6 +794,8 @@ test_blockcipher_all_tests(struct rte_mempool *mbuf_pool,
target_pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OCTEONTX;
else if (driver_id == null_pmd)
target_pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_NULL;
+ else if (driver_id == nitrox_pmd)
+ target_pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_NITROX;
else
TEST_ASSERT(0, "Unrecognized cryptodev type");
diff --git a/app/test/test_cryptodev_blockcipher.h b/app/test/test_cryptodev_blockcipher.h
index 3d4b97533..1a65cdab3 100644
--- a/app/test/test_cryptodev_blockcipher.h
+++ b/app/test/test_cryptodev_blockcipher.h
@@ -32,6 +32,7 @@
#define BLOCKCIPHER_TEST_TARGET_PMD_CAAM_JR 0x0400 /* CAAM_JR flag */
#define BLOCKCIPHER_TEST_TARGET_PMD_CCP 0x0800 /* CCP flag */
#define BLOCKCIPHER_TEST_TARGET_PMD_NULL 0x1000 /* NULL flag */
+#define BLOCKCIPHER_TEST_TARGET_PMD_NITROX 0x2000 /* NITROX flag */
#define BLOCKCIPHER_TEST_OP_CIPHER (BLOCKCIPHER_TEST_OP_ENCRYPT | \
BLOCKCIPHER_TEST_OP_DECRYPT)
--
2.13.6
next prev parent reply index
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-17 5:29 [dpdk-dev] [PATCH 00/10] add Nitrox crypto device support Nagadheeraj Rottela
2019-07-17 5:29 ` [dpdk-dev] [PATCH 01/10] crypto/nitrox: add Nitrox build and doc skeleton Nagadheeraj Rottela
2019-07-17 5:29 ` [dpdk-dev] [PATCH 02/10] crypto/nitrox: add PCI probe and remove routines Nagadheeraj Rottela
2019-07-17 5:29 ` [dpdk-dev] [PATCH 03/10] crypto/nitrox: create Nitrox symmetric cryptodev Nagadheeraj Rottela
2019-07-17 5:29 ` [dpdk-dev] [PATCH 04/10] crypto/nitrox: add basic symmetric cryptodev operations Nagadheeraj Rottela
2019-07-17 5:29 ` [dpdk-dev] [PATCH 05/10] crypto/nitrox: add software queue management functionality Nagadheeraj Rottela
2019-07-17 5:29 ` [dpdk-dev] [PATCH 06/10] crypto/nitrox: add hardware " Nagadheeraj Rottela
2019-07-17 5:29 ` [dpdk-dev] [PATCH 07/10] crypto/nitrox: add session management operations Nagadheeraj Rottela
2019-07-17 5:29 ` [dpdk-dev] [PATCH 08/10] crypto/nitrox: add burst enqueue and dequeue operations Nagadheeraj Rottela
2019-07-17 14:16 ` Aaron Conole
2019-07-17 5:29 ` [dpdk-dev] [PATCH 09/10] crypto/nitrox: add cipher auth crypto chain processing Nagadheeraj Rottela
2019-07-17 5:29 ` [dpdk-dev] [PATCH 10/10] test/crypto: add tests for Nitrox PMD Nagadheeraj Rottela
2019-07-19 12:33 ` [dpdk-dev] [PATCH v2 00/10] add Nitrox crypto device support Nagadheeraj Rottela
2019-07-19 12:33 ` [dpdk-dev] [PATCH v2 01/10] crypto/nitrox: add Nitrox build and doc skeleton Nagadheeraj Rottela
2019-07-19 12:33 ` [dpdk-dev] [PATCH v2 02/10] crypto/nitrox: add PCI probe and remove routines Nagadheeraj Rottela
2019-07-19 12:33 ` [dpdk-dev] [PATCH v2 03/10] crypto/nitrox: create Nitrox symmetric cryptodev Nagadheeraj Rottela
2019-07-19 12:33 ` [dpdk-dev] [PATCH v2 04/10] crypto/nitrox: add basic symmetric cryptodev operations Nagadheeraj Rottela
2019-07-19 12:33 ` [dpdk-dev] [PATCH v2 05/10] crypto/nitrox: add software queue management functionality Nagadheeraj Rottela
2019-07-19 12:33 ` [dpdk-dev] [PATCH v2 06/10] crypto/nitrox: add hardware " Nagadheeraj Rottela
2019-07-19 12:33 ` [dpdk-dev] [PATCH v2 07/10] crypto/nitrox: add session management operations Nagadheeraj Rottela
2019-07-19 12:33 ` [dpdk-dev] [PATCH v2 08/10] crypto/nitrox: add burst enqueue and dequeue operations Nagadheeraj Rottela
2019-07-19 12:33 ` [dpdk-dev] [PATCH v2 09/10] crypto/nitrox: add cipher auth crypto chain processing Nagadheeraj Rottela
2019-07-19 12:33 ` [dpdk-dev] [PATCH v2 10/10] test/crypto: add tests for Nitrox PMD Nagadheeraj Rottela
2019-08-23 10:42 ` [dpdk-dev] [PATCH v3 00/11] add Nitrox crypto device support Nagadheeraj Rottela
2019-08-23 10:42 ` [dpdk-dev] [PATCH v3 01/11] crypto/nitrox: add Nitrox build and doc skeleton Nagadheeraj Rottela
2019-08-23 10:42 ` [dpdk-dev] [PATCH v3 02/11] crypto/nitrox: add PCI probe and remove routines Nagadheeraj Rottela
2019-08-23 10:42 ` [dpdk-dev] [PATCH v3 03/11] crypto/nitrox: create Nitrox symmetric cryptodev Nagadheeraj Rottela
2019-08-23 10:42 ` [dpdk-dev] [PATCH v3 04/11] crypto/nitrox: add basic symmetric cryptodev operations Nagadheeraj Rottela
2019-08-23 10:42 ` [dpdk-dev] [PATCH v3 05/11] crypto/nitrox: add software queue management functionality Nagadheeraj Rottela
2019-08-23 10:42 ` [dpdk-dev] [PATCH v3 06/11] crypto/nitrox: add hardware " Nagadheeraj Rottela
2019-08-23 10:42 ` [dpdk-dev] [PATCH v3 07/11] crypto/nitrox: add session management operations Nagadheeraj Rottela
2019-08-23 10:42 ` [dpdk-dev] [PATCH v3 08/11] crypto/nitrox: add burst enqueue and dequeue operations Nagadheeraj Rottela
2019-08-25 20:55 ` Mattias Rönnblom
2019-08-26 12:49 ` [dpdk-dev] [PATCH v4 00/11] add Nitrox crypto device support Nagadheeraj Rottela
2019-08-26 12:49 ` [dpdk-dev] [PATCH v4 01/11] crypto/nitrox: add Nitrox build and doc skeleton Nagadheeraj Rottela
2019-09-20 8:56 ` Akhil Goyal
2019-09-20 9:02 ` Akhil Goyal
2019-08-26 12:49 ` [dpdk-dev] [PATCH v4 02/11] crypto/nitrox: add PCI probe and remove routines Nagadheeraj Rottela
2019-09-20 9:15 ` Akhil Goyal
2019-08-26 12:49 ` [dpdk-dev] [PATCH v4 03/11] crypto/nitrox: create Nitrox symmetric cryptodev Nagadheeraj Rottela
2019-09-20 9:29 ` Akhil Goyal
2019-08-26 12:49 ` [dpdk-dev] [PATCH v4 04/11] crypto/nitrox: add basic symmetric cryptodev operations Nagadheeraj Rottela
2019-09-20 9:44 ` Akhil Goyal
2019-08-26 12:49 ` [dpdk-dev] [PATCH v4 05/11] crypto/nitrox: add software queue management functionality Nagadheeraj Rottela
2019-08-26 12:49 ` [dpdk-dev] [PATCH v4 06/11] crypto/nitrox: add hardware " Nagadheeraj Rottela
2019-08-26 12:49 ` [dpdk-dev] [PATCH v4 07/11] crypto/nitrox: add session management operations Nagadheeraj Rottela
2019-08-26 12:49 ` [dpdk-dev] [PATCH v4 08/11] crypto/nitrox: add burst enqueue and dequeue operations Nagadheeraj Rottela
2019-09-20 10:15 ` Akhil Goyal
2019-09-20 11:11 ` Nagadheeraj Rottela
2019-09-20 11:13 ` Akhil Goyal
2019-09-20 11:23 ` Nagadheeraj Rottela
2019-09-20 11:25 ` Akhil Goyal
2019-08-26 12:49 ` [dpdk-dev] [PATCH v4 09/11] crypto/nitrox: add cipher auth crypto chain processing Nagadheeraj Rottela
2019-08-26 12:49 ` [dpdk-dev] [PATCH v4 10/11] test/crypto: add tests for Nitrox PMD Nagadheeraj Rottela
2019-08-26 12:49 ` [dpdk-dev] [PATCH v4 11/11] crypto/nitrox: add SHA224 and SHA256 HMAC algorithms Nagadheeraj Rottela
2019-09-20 8:49 ` Akhil Goyal
2019-09-20 10:16 ` Akhil Goyal
2019-08-23 10:42 ` [dpdk-dev] [PATCH v3 09/11] crypto/nitrox: add cipher auth crypto chain processing Nagadheeraj Rottela
2019-08-23 10:42 ` Nagadheeraj Rottela [this message]
2019-08-23 10:42 ` [dpdk-dev] [PATCH v3 11/11] crypto/nitrox: add SHA224 and SHA256 HMAC algorithms Nagadheeraj Rottela
Reply instructions:
You may reply publically to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190823104144.19300-11-rnagadheeraj@marvell.com \
--to=rnagadheeraj@marvell.com \
--cc=akhil.goyal@nxp.com \
--cc=dev@dpdk.org \
--cc=jsrikanth@marvell.com \
--cc=pablo.de.lara.guarch@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
DPDK-dev Archive on lore.kernel.org
Archives are clonable:
git clone --mirror https://lore.kernel.org/dpdk-dev/0 dpdk-dev/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 dpdk-dev dpdk-dev/ https://lore.kernel.org/dpdk-dev \
dev@dpdk.org dpdk-dev@archiver.kernel.org
public-inbox-index dpdk-dev
Example config snippet for mirrors
Newsgroup available over NNTP:
nntp://nntp.lore.kernel.org/org.dpdk.dev
AGPL code for this site: git clone https://public-inbox.org/ public-inbox