DPDK-dev Archive on lore.kernel.org
 help / color / Atom feed
From: <pbhagavatula@marvell.com>
To: <jerinj@marvell.com>, <thomas@monjalon.net>,
	<david.marchand@redhat.com>,
	 Marko Kovacevic <marko.kovacevic@intel.com>,
	Ori Kam <orika@mellanox.com>,
	Bruce Richardson <bruce.richardson@intel.com>,
	Radu Nicolau <radu.nicolau@intel.com>,
	Akhil Goyal <akhil.goyal@nxp.com>,
	Tomasz Kantecki <tomasz.kantecki@intel.com>,
	Sunil Kumar Kori <skori@marvell.com>,
	"Pavan Nikhilesh" <pbhagavatula@marvell.com>
Cc: <dev@dpdk.org>
Subject: [dpdk-dev] [PATCH v2 2/3] examples/l3fwd: use IP reserved addresses for EM mode
Date: Sun, 2 Aug 2020 23:46:29 +0530
Message-ID: <20200802181631.691-2-pbhagavatula@marvell.com> (raw)
In-Reply-To: <20200802181631.691-1-pbhagavatula@marvell.com>

From: Pavan Nikhilesh <pbhagavatula@marvell.com>

The l3fwd example should use the reserved IPv4/v6 reserved address
ranges defined in RFC5735 and RFC5180 and RFC863 discard protocol for
the port number in the exact match mode of L3 forwarding.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
---
 examples/l3fwd/l3fwd_em.c | 87 ++++++++++++++++++++++++++-------------
 1 file changed, 59 insertions(+), 28 deletions(-)

diff --git a/examples/l3fwd/l3fwd_em.c b/examples/l3fwd/l3fwd_em.c
index fdbee70b4..481b6dcce 100644
--- a/examples/l3fwd/l3fwd_em.c
+++ b/examples/l3fwd/l3fwd_em.c
@@ -99,33 +99,64 @@ struct ipv6_l3fwd_em_route {
 	uint8_t if_out;
 };
 
-static struct ipv4_l3fwd_em_route ipv4_l3fwd_em_route_array[] = {
-	{{RTE_IPV4(101, 0, 0, 0), RTE_IPV4(100, 10, 0, 1),  101, 11, IPPROTO_TCP}, 0},
-	{{RTE_IPV4(201, 0, 0, 0), RTE_IPV4(200, 20, 0, 1),  102, 12, IPPROTO_TCP}, 1},
-	{{RTE_IPV4(111, 0, 0, 0), RTE_IPV4(100, 30, 0, 1),  101, 11, IPPROTO_TCP}, 2},
-	{{RTE_IPV4(211, 0, 0, 0), RTE_IPV4(200, 40, 0, 1),  102, 12, IPPROTO_TCP}, 3},
+/* 198.18.0.0/16 are set aside for RFC2544 benchmarking (RFC5735).
+ * Use RFC863 Discard Protocol.
+ */
+static const struct ipv4_l3fwd_em_route ipv4_l3fwd_em_route_array[] = {
+	{{RTE_IPV4(198, 18, 0, 0), RTE_IPV4(198, 18, 0, 1),  9, 9, IPPROTO_TCP}, 0},
+	{{RTE_IPV4(198, 18, 1, 0), RTE_IPV4(198, 18, 1, 1),  9, 9, IPPROTO_TCP}, 1},
+	{{RTE_IPV4(198, 18, 2, 0), RTE_IPV4(198, 18, 2, 1),  9, 9, IPPROTO_TCP}, 2},
+	{{RTE_IPV4(198, 18, 3, 0), RTE_IPV4(198, 18, 3, 1),  9, 9, IPPROTO_TCP}, 3},
+	{{RTE_IPV4(198, 18, 4, 0), RTE_IPV4(198, 18, 4, 1),  9, 9, IPPROTO_TCP}, 4},
+	{{RTE_IPV4(198, 18, 5, 0), RTE_IPV4(198, 18, 5, 1),  9, 9, IPPROTO_TCP}, 5},
+	{{RTE_IPV4(198, 18, 6, 0), RTE_IPV4(198, 18, 6, 1),  9, 9, IPPROTO_TCP}, 6},
+	{{RTE_IPV4(198, 18, 7, 0), RTE_IPV4(198, 18, 7, 1),  9, 9, IPPROTO_TCP}, 7},
+	{{RTE_IPV4(198, 18, 8, 0), RTE_IPV4(198, 18, 8, 1),  9, 9, IPPROTO_TCP}, 8},
+	{{RTE_IPV4(198, 18, 9, 0), RTE_IPV4(198, 18, 9, 1),  9, 9, IPPROTO_TCP}, 9},
+	{{RTE_IPV4(198, 18, 10, 0), RTE_IPV4(198, 18, 10, 1),  9, 9, IPPROTO_TCP}, 10},
+	{{RTE_IPV4(198, 18, 11, 0), RTE_IPV4(198, 18, 11, 1),  9, 9, IPPROTO_TCP}, 11},
+	{{RTE_IPV4(198, 18, 12, 0), RTE_IPV4(198, 18, 12, 1),  9, 9, IPPROTO_TCP}, 12},
+	{{RTE_IPV4(198, 18, 13, 0), RTE_IPV4(198, 18, 13, 1),  9, 9, IPPROTO_TCP}, 13},
+	{{RTE_IPV4(198, 18, 14, 0), RTE_IPV4(198, 18, 14, 1),  9, 9, IPPROTO_TCP}, 14},
+	{{RTE_IPV4(198, 18, 15, 0), RTE_IPV4(198, 18, 15, 1),  9, 9, IPPROTO_TCP}, 15},
 };
 
-static struct ipv6_l3fwd_em_route ipv6_l3fwd_em_route_array[] = {
-	{{
-	{0xfe, 0x80, 0, 0, 0, 0, 0, 0, 0x02, 0x1e, 0x67, 0xff, 0xfe, 0, 0, 0},
-	{0xfe, 0x80, 0, 0, 0, 0, 0, 0, 0x02, 0x1b, 0x21, 0xff, 0xfe, 0x91, 0x38, 0x05},
-	101, 11, IPPROTO_TCP}, 0},
-
-	{{
-	{0xfe, 0x90, 0, 0, 0, 0, 0, 0, 0x02, 0x1e, 0x67, 0xff, 0xfe, 0, 0, 0},
-	{0xfe, 0x90, 0, 0, 0, 0, 0, 0, 0x02, 0x1b, 0x21, 0xff, 0xfe, 0x91, 0x38, 0x05},
-	102, 12, IPPROTO_TCP}, 1},
-
-	{{
-	{0xfe, 0xa0, 0, 0, 0, 0, 0, 0, 0x02, 0x1e, 0x67, 0xff, 0xfe, 0, 0, 0},
-	{0xfe, 0xa0, 0, 0, 0, 0, 0, 0, 0x02, 0x1b, 0x21, 0xff, 0xfe, 0x91, 0x38, 0x05},
-	101, 11, IPPROTO_TCP}, 2},
-
-	{{
-	{0xfe, 0xb0, 0, 0, 0, 0, 0, 0, 0x02, 0x1e, 0x67, 0xff, 0xfe, 0, 0, 0},
-	{0xfe, 0xb0, 0, 0, 0, 0, 0, 0, 0x02, 0x1b, 0x21, 0xff, 0xfe, 0x91, 0x38, 0x05},
-	102, 12, IPPROTO_TCP}, 3},
+/* 2001:0200::/48 is IANA reserved range for IPv6 benchmarking (RFC5180).
+ * Use RFC863 Discard Protocol.
+ */
+static const struct ipv6_l3fwd_em_route ipv6_l3fwd_em_route_array[] = {
+	{{{32, 1, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
+	  {32, 1, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1}, 9, 9, IPPROTO_TCP}, 0},
+	{{{32, 1, 2, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0},
+	  {32, 1, 2, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1}, 9, 9, IPPROTO_TCP}, 1},
+	{{{32, 1, 2, 0, 0, 0, 0, 0, 0, 2, 0, 0, 0, 0, 0, 0},
+	  {32, 1, 2, 0, 0, 0, 0, 0, 0, 2, 0, 0, 0, 0, 0, 1}, 9, 9, IPPROTO_TCP}, 2},
+	{{{32, 1, 2, 0, 0, 0, 0, 0, 0, 3, 0, 0, 0, 0, 0, 0},
+	  {32, 1, 2, 0, 0, 0, 0, 0, 0, 3, 0, 0, 0, 0, 0, 1}, 9, 9, IPPROTO_TCP}, 3},
+	{{{32, 1, 2, 0, 0, 0, 0, 0, 0, 4, 0, 0, 0, 0, 0, 0},
+	  {32, 1, 2, 0, 0, 0, 0, 0, 0, 4, 0, 0, 0, 0, 0, 1}, 9, 9, IPPROTO_TCP}, 4},
+	{{{32, 1, 2, 0, 0, 0, 0, 0, 0, 5, 0, 0, 0, 0, 0, 0},
+	  {32, 1, 2, 0, 0, 0, 0, 0, 0, 5, 0, 0, 0, 0, 0, 1}, 9, 9, IPPROTO_TCP}, 5},
+	{{{32, 1, 2, 0, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 0},
+	  {32, 1, 2, 0, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 1}, 9, 9, IPPROTO_TCP}, 6},
+	{{{32, 1, 2, 0, 0, 0, 0, 0, 0, 7, 0, 0, 0, 0, 0, 0},
+	  {32, 1, 2, 0, 0, 0, 0, 0, 0, 7, 0, 0, 0, 0, 0, 1}, 9, 9, IPPROTO_TCP}, 7},
+	{{{32, 1, 2, 0, 0, 0, 0, 0, 0, 8, 0, 0, 0, 0, 0, 0},
+	  {32, 1, 2, 0, 0, 0, 0, 0, 0, 8, 0, 0, 0, 0, 0, 1}, 9, 9, IPPROTO_TCP}, 8},
+	{{{32, 1, 2, 0, 0, 0, 0, 0, 0, 9, 0, 0, 0, 0, 0, 0},
+	  {32, 1, 2, 0, 0, 0, 0, 0, 0, 9, 0, 0, 0, 0, 0, 1}, 9, 9, IPPROTO_TCP}, 9},
+	{{{32, 1, 2, 0, 0, 0, 0, 0, 0, 10, 0, 0, 0, 0, 0, 0},
+	  {32, 1, 2, 0, 0, 0, 0, 0, 0, 10, 0, 0, 0, 0, 0, 1}, 9, 9, IPPROTO_TCP}, 10},
+	{{{32, 1, 2, 0, 0, 0, 0, 0, 0, 11, 0, 0, 0, 0, 0, 0},
+	  {32, 1, 2, 0, 0, 0, 0, 0, 0, 11, 0, 0, 0, 0, 0, 1}, 9, 9, IPPROTO_TCP}, 11},
+	{{{32, 1, 2, 0, 0, 0, 0, 0, 0, 12, 0, 0, 0, 0, 0, 0},
+	  {32, 1, 2, 0, 0, 0, 0, 0, 0, 12, 0, 0, 0, 0, 0, 1}, 9, 9, IPPROTO_TCP}, 12},
+	{{{32, 1, 2, 0, 0, 0, 0, 0, 0, 13, 0, 0, 0, 0, 0, 0},
+	  {32, 1, 2, 0, 0, 0, 0, 0, 0, 13, 0, 0, 0, 0, 0, 1}, 9, 9, IPPROTO_TCP}, 13},
+	{{{32, 1, 2, 0, 0, 0, 0, 0, 0, 14, 0, 0, 0, 0, 0, 0},
+	  {32, 1, 2, 0, 0, 0, 0, 0, 0, 14, 0, 0, 0, 0, 0, 1}, 9, 9, IPPROTO_TCP}, 14},
+	{{{32, 1, 2, 0, 0, 0, 0, 0, 0, 15, 0, 0, 0, 0, 0, 0},
+	  {32, 1, 2, 0, 0, 0, 0, 0, 0, 15, 0, 0, 0, 0, 0, 1}, 9, 9, IPPROTO_TCP}, 15},
 };
 
 struct rte_hash *ipv4_l3fwd_em_lookup_struct[NB_SOCKETS];
@@ -429,7 +460,7 @@ populate_ipv4_many_flow_into_table(const struct rte_hash *h,
 		switch (i & (NUMBER_PORT_USED - 1)) {
 		case 0:
 			entry = ipv4_l3fwd_em_route_array[0];
-			entry.key.ip_dst = RTE_IPV4(101, c, b, a);
+			entry.key.ip_dst = RTE_IPV4(9, c, b, a);
 			break;
 		case 1:
 			entry = ipv4_l3fwd_em_route_array[1];
@@ -437,11 +468,11 @@ populate_ipv4_many_flow_into_table(const struct rte_hash *h,
 			break;
 		case 2:
 			entry = ipv4_l3fwd_em_route_array[2];
-			entry.key.ip_dst = RTE_IPV4(111, c, b, a);
+			entry.key.ip_dst = RTE_IPV4(91, c, b, a);
 			break;
 		case 3:
 			entry = ipv4_l3fwd_em_route_array[3];
-			entry.key.ip_dst = RTE_IPV4(211, c, b, a);
+			entry.key.ip_dst = RTE_IPV4(29, c, b, a);
 			break;
 		};
 		convert_ipv4_5tuple(&entry.key, &newkey);
-- 
2.17.1


  reply index

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-30  5:23 [dpdk-dev] [PATCH 1/2] examples/l3fwd: increase number of routes pbhagavatula
2019-10-30  5:23 ` [dpdk-dev] [PATCH 2/2] examples/l3fwd: print port bdf when initializing routes pbhagavatula
2019-11-08  8:51 ` [dpdk-dev] [PATCH 1/2] examples/l3fwd: increase number of routes David Marchand
2020-08-02 18:16 ` [dpdk-dev] [PATCH v2 1/3] " pbhagavatula
2020-08-02 18:16   ` pbhagavatula [this message]
2020-08-02 18:16   ` [dpdk-dev] [PATCH v2 3/3] examples/l3fwd: print port bdf when initializing routes pbhagavatula

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200802181631.691-2-pbhagavatula@marvell.com \
    --to=pbhagavatula@marvell.com \
    --cc=akhil.goyal@nxp.com \
    --cc=bruce.richardson@intel.com \
    --cc=david.marchand@redhat.com \
    --cc=dev@dpdk.org \
    --cc=jerinj@marvell.com \
    --cc=marko.kovacevic@intel.com \
    --cc=orika@mellanox.com \
    --cc=radu.nicolau@intel.com \
    --cc=skori@marvell.com \
    --cc=thomas@monjalon.net \
    --cc=tomasz.kantecki@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK-dev Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/dpdk-dev/0 dpdk-dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dpdk-dev dpdk-dev/ https://lore.kernel.org/dpdk-dev \
		dev@dpdk.org
	public-inbox-index dpdk-dev

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git