DPDK-dev Archive on lore.kernel.org
 help / color / Atom feed
From: Dave Burley <dave.burley@accelercomm.com>
To: dev@dpdk.org
Subject: Re: [dpdk-dev] [PATCH v3 11/14] doc: update of testbbdev documentation
Date: Fri, 13 Mar 2020 11:03:06 +0000
Message-ID: <69da286d-4177-75eb-79cf-256c066bcf54@accelercomm.com> (raw)
In-Reply-To: <1583348102-13253-12-git-send-email-nicolas.chautru@intel.com>

Acked-by: Dave Burley <dave.burley@accelercomm.com>

On 04/03/2020 18:54, Nicolas Chautru wrote:
> From: Nic Chautru <nicolas.chautru@intel.com>
>
> Update related to the changes introduced by the
> previous commits.
>
> Signed-off-by: Nic Chautru <nicolas.chautru@intel.com>
> ---
>   doc/guides/tools/testbbdev.rst | 337 +++++++++++++++++++++++++++++++++++------
>   1 file changed, 291 insertions(+), 46 deletions(-)
>
> diff --git a/doc/guides/tools/testbbdev.rst b/doc/guides/tools/testbbdev.rst
> index 7e95696..016f3f9 100644
> --- a/doc/guides/tools/testbbdev.rst
> +++ b/doc/guides/tools/testbbdev.rst
> @@ -6,9 +6,9 @@ dpdk-test-bbdev Application
>   
>   The ``dpdk-test-bbdev`` tool is a Data Plane Development Kit (DPDK) utility that
>   allows measuring performance parameters of PMDs available in the bbdev framework.
> -Available tests available for execution are: latency, throughput, validation and
> -sanity tests. Execution of tests can be customized using various parameters
> -passed to a python running script.
> +Available tests available for execution are: latency, throughput, validation,
> +bler and sanity tests. Execution of tests can be customized using various
> +parameters passed to a python running script.
>   
>   Compiling the Application
>   -------------------------
> @@ -47,6 +47,8 @@ The tool application has a number of command line options:
>                          [-c TEST_CASE [TEST_CASE ...]]
>                          [-v TEST_VECTOR [TEST_VECTOR...]] [-n NUM_OPS]
>                          [-b BURST_SIZE [BURST_SIZE ...]] [-l NUM_LCORES]
> +                       [-t MAX_ITERS [MAX_ITERS ...]]
> +                       [-s SNR [SNR ...]]
>   
>   command-line Options
>   ~~~~~~~~~~~~~~~~~~~~
> @@ -106,10 +108,18 @@ The following are the command-line options:
>    Specifies operations enqueue/dequeue burst size. If not specified burst_size is
>    set to 32. Maximum is 512.
>   
> +``-t MAX_ITERS [MAX_ITERS ...], --iter_max MAX_ITERS [MAX_ITERS ...]``
> + Specifies LDPC decoder operations maximum number of iterations for throughput
> + and bler tests. If not specified iter_max is set to 6.
> +
> +``-s SNR [SNR ...], --snr SNR [SNR ...]``
> + Specifies for LDPC decoder operations the SNR in dB used when generating LLRs
> + for bler tests. If not specified snr is set to 0 dB.
> +
>   Test Cases
>   ~~~~~~~~~~
>   
> -There are 6 main test cases that can be executed using testbbdev tool:
> +There are 7 main test cases that can be executed using testbbdev tool:
>   
>   * Sanity checks [-c unittest]
>       - Performs sanity checks on BBDEV interface, validating basic functionality
> @@ -149,6 +159,11 @@ There are 6 main test cases that can be executed using testbbdev tool:
>       - Results are printed in million operations per second and million bits
>         per second
>   
> +* BLER measurement [-c bler]
> +    - Performs full operation of enqueue and dequeue
> +    - Measures the achieved throughput on a subset or all available CPU cores
> +    - Computed BLER in % based on the total number of operations.
> +
>   * Interrupt-mode Throughput [-c interrupt]
>       - Similar to Throughput test case, but using interrupts. No polling.
>   
> @@ -159,7 +174,7 @@ Parameter Globbing
>   Thanks to the globbing functionality in python test-bbdev.py script allows to
>   run tests with different set of vector files without giving all of them explicitly.
>   
> -**Example usage:**
> +**Example usage for 4G:**
>   
>   .. code-block:: console
>   
> @@ -221,6 +236,11 @@ It runs all tests with "default" vectors.
>   * ``turbo_enc_default.data`` is a soft link to
>     ``turbo_enc_c1_k6144_r0_e32256_crc24b_rm.data``
>   
> +* ``ldpc_dec_default.data`` is a soft link to
> +  ``ldpc_dec_v6563.data``
> +
> +* ``ldpc_enc_default.data`` is a soft link to
> +  ``ldpc_enc_c1_k8148_r0_e9372_rm.data``
>   
>   Running Tests
>   -------------
> @@ -254,6 +274,38 @@ x86_64-native-linux-icc target:
>                |-- turbo_dec_c1_k6144_r0_e34560_posllr.data
>                |-- turbo_enc_c1_k40_r0_e1194_rm.data
>                |-- turbo_enc_c1_k6144_r0_e32256_crc24b_rm.data
> +             |-- ldpc_enc_v9503.data
> +             |-- ldpc_enc_v8568.data
> +             |-- ldpc_enc_v7813.data
> +             |-- ldpc_enc_v2342.data
> +             |-- ldpc_enc_v11835.data
> +             |-- ldpc_dec_v8568.data
> +             |-- ldpc_dec_v8480.data
> +             |-- ldpc_dec_v7813.data
> +             |-- ldpc_dec_v2342_drop.data
> +             |-- ldpc_dec_v11835.data
> +             |-- ldpc_dec_HARQ_1_2.data
> +             |-- ldpc_dec_HARQ_1_1.data
> +             |-- ldpc_dec_HARQ_1_0.data
> +             |-- ldpc_enc_v8568_crc24a.data
> +             |-- ldpc_enc_v3964_rv1.data
> +             |-- ldpc_enc_c1_k8148_r0_e9372_rm.data
> +             |-- ldpc_enc_c1_k720_r0_e864_rm_crc24b.data
> +             |-- ldpc_enc_c1_k720_r0_e832_rm.data
> +             |-- ldpc_enc_c1_k330_r0_e360_rm.data
> +             |-- ldpc_enc_c1_k1144_r0_e1380_rm_crc24b.data
> +             |-- ldpc_enc_c1_k1144_r0_e1380_rm.data
> +             |-- ldpc_dec_vcrc_fail.data
> +             |-- ldpc_dec_v8568_low.data
> +             |-- ldpc_dec_v14298.data
> +             |-- ldpc_dec_HARQ_26449_1.loopback_w
> +             |-- ldpc_dec_HARQ_1_3.data
> +             |-- ldpc_enc_v2570_lbrm.data
> +             |-- ldpc_dec_v9503.data
> +             |-- ldpc_dec_v6563.data
> +             |-- ldpc_dec_HARQ_3_1_harq_comp.data
> +             |-- ldpc_dec_HARQ_2_1_llr_comp.data
> +             |-- ldpc_dec_HARQ_26449_1.loopback_r
>   
>    |-- x86_64-native-linux-icc
>        |-- app
> @@ -280,7 +332,7 @@ baseband turbo_sw device
>   
>     ./test-bbdev.py -p ../../x86_64-native-linux-icc/app/testbbdev
>     -e="--vdev=baseband_turbo_sw" -t 120 -c validation
> -  -v ./test_vectors/turbo_* -n 64 -b 8 32
> +  -v ./test_vectors/* -n 64 -b 8 32
>   
>   It runs **validation** test for each vector file that matches the given pattern.
>   Number of operations to process on device is set to 64 and operations timeout is
> @@ -342,8 +394,8 @@ Length of chain variable is calculated by parser. Can not be defined
>   explicitly.
>   
>   Variable op_type has to be defined as a first variable in file. It specifies
> -what type of operations will be executed. For decoder op_type has to be set to
> -``RTE_BBDEV_OP_TURBO_DEC`` and for encoder to ``RTE_BBDEV_OP_TURBO_ENC``.
> +what type of operations will be executed. For 4G decoder op_type has to be set to
> +``RTE_BBDEV_OP_TURBO_DEC`` and for 4G encoder to ``RTE_BBDEV_OP_TURBO_ENC``.
>   
>   Full details of the meaning and valid values for the below fields are
>   documented in *rte_bbdev_op.h*
> @@ -469,35 +521,7 @@ uint8_t value
>       num_maps =
>       0
>   
> -Chain of flags for turbo decoder operation. Following flags can be used:
> -
> -- ``RTE_BBDEV_TURBO_SUBBLOCK_DEINTERLEAVE``
> -
> -- ``RTE_BBDEV_TURBO_CRC_TYPE_24B``
> -
> -- ``RTE_BBDEV_TURBO_EQUALIZER``
> -
> -- ``RTE_BBDEV_TURBO_SOFT_OUT_SATURATE``
> -
> -- ``RTE_BBDEV_TURBO_HALF_ITERATION_EVEN``
> -
> -- ``RTE_BBDEV_TURBO_CONTINUE_CRC_MATCH``
> -
> -- ``RTE_BBDEV_TURBO_SOFT_OUTPUT``
> -
> -- ``RTE_BBDEV_TURBO_EARLY_TERMINATION``
> -
> -- ``RTE_BBDEV_TURBO_DEC_INTERRUPTS``
> -
> -- ``RTE_BBDEV_TURBO_POS_LLR_1_BIT_IN``
> -
> -- ``RTE_BBDEV_TURBO_NEG_LLR_1_BIT_IN``
> -
> -- ``RTE_BBDEV_TURBO_POS_LLR_1_BIT_SOFT_OUT``
> -
> -- ``RTE_BBDEV_TURBO_NEG_LLR_1_BIT_SOFT_OUT``
> -
> -- ``RTE_BBDEV_TURBO_MAP_DEC``
> +Chain of flags for LDPC decoder operation based on the rte_bbdev_op_td_flag_bitmasks:
>   
>   Example:
>   
> @@ -579,26 +603,247 @@ uint8_t value
>       rv_index =
>       0
>   
> -Chain of flags for turbo encoder operation. Following flags can be used:
> +Chain of flags for LDPC decoder operation based on the rte_bbdev_op_te_flag_bitmasks:
> +
> +``RTE_BBDEV_TURBO_ENC_SCATTER_GATHER`` is used to indicate the parser to
> +force the input data to be memory split and formed as a segmented mbuf.
> +
> +
> +.. parsed-literal::
> +
> +    op_flags =
> +    RTE_BBDEV_TURBO_RATE_MATCH
>   
> -- ``RTE_BBDEV_TURBO_RV_INDEX_BYPASS``
> +Chain of operation statuses that are expected after operation is performed.
> +Following statuses can be used:
>   
> -- ``RTE_BBDEV_TURBO_RATE_MATCH``
> +- ``DMA``
>   
> -- ``RTE_BBDEV_TURBO_CRC_24B_ATTACH``
> +- ``FCW``
>   
> -- ``RTE_BBDEV_TURBO_CRC_24A_ATTACH``
> +- ``OK``
>   
> -- ``RTE_BBDEV_TURBO_ENC_SCATTER_GATHER``
> +``OK`` means no errors are expected. Cannot be used with other values.
>   
> -``RTE_BBDEV_TURBO_ENC_SCATTER_GATHER`` is used to indicate the parser to
> -force the input data to be memory split and formed as a segmented mbuf.
> +.. parsed-literal::
> +
> +    expected_status =
> +    OK
> +
> +LDPC decoder test vectors template
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +For LDPC decoder it has to be always set to ``RTE_BBDEV_OP_LDPC_DEC``
> +
> +.. parsed-literal::
> +
> +    op_type =
> +    RTE_BBDEV_OP_LDPC_DEC
> +
> +Chain of uint32_t values. Note that it is possible to define more than one
> +input/output entries which will result in chaining two or more data structures
> +for *segmented Transport Blocks*
> +
> +.. parsed-literal::
> +
> +    input0 =
> +    0x00000000, 0x7f817f00, 0x7f7f8100, 0x817f8100, 0x81008100, 0x7f818100, 0x81817f00, 0x7f818100,
> +    0x81007f00, 0x7f818100, 0x817f8100, 0x81817f00, 0x81008100, 0x817f7f00, 0x7f7f8100, 0x81817f00
> +
> +.. parsed-literal::
> +
> +    output0 =
> +    0xa7d6732e
> +
> +uint8_t value
> +
> +.. parsed-literal::
> +
> +    basegraph=
> +    1
> +
> +uint16_t value
> +
> +.. parsed-literal::
> +
> +    z_c=
> +    224
> +
> +uint16_t value
> +
> +.. parsed-literal::
> +
> +    n_cb=
> +    14784
> +
> +uint8_t value
> +
> +.. parsed-literal::
> +
> +    q_m=
> +    1
> +
> +uint16_t value
> +
> +.. parsed-literal::
> +
> +    n_filler=
> +    40
> +
> +uint32_t value
> +
> +.. parsed-literal::
> +
> +    e=
> +    13072
> +
> +uint8_t value
> +
> +.. parsed-literal::
> +
> +    rv_index=
> +    2
> +
> +uint8_t value
> +
> +.. parsed-literal::
> +    code_block_mode=
> +    1
>   
> +uint8_t value
> +
> +.. parsed-literal::
> +
> +    iter_max=
> +    20
> +
> +uint8_t value
> +
> +.. parsed-literal::
> +
> +    expected_iter_count=
> +    8
> +
> +
> +Chain of flags for LDPC decoder operation based on the rte_bbdev_op_ldpcdec_flag_bitmasks:
> +
> +Example:
> +
> +    .. parsed-literal::
> +
> +        op_flags =
> +        RTE_BBDEV_LDPC_ITERATION_STOP_ENABLE, RTE_BBDEV_LDPC_HQ_COMBINE_OUT_ENABLE,
> +        RTE_BBDEV_LDPC_HQ_COMBINE_IN_ENABLE, RTE_BBDEV_LDPC_HARQ_6BIT_COMPRESSION
> +
> +Chain of operation statuses that are expected after operation is performed.
> +Following statuses can be used:
> +
> +- ``SYNCRC``
> +
> +- ``SYN``
> +
> +- ``CRC``
> +
> +- ``OK``
> +
> +``OK`` means no errors are expected. Cannot be used with other values.
> +
> +.. parsed-literal::
> +
> +    expected_status =
> +    CRC
> +
> +
> +LDPC encoder test vectors template
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +For turbo encoder it has to be always set to ``RTE_BBDEV_OP_LDPC_ENC``
> +
> +.. parsed-literal::
> +
> +    op_type =
> +    RTE_BBDEV_OP_LDPC_ENC
> +
> +Chain of uint32_t values
> +
> +.. parsed-literal::
> +
> +    input0 =
> +    0x11d2bcac, 0x4d
> +
> +Chain of uint32_t values
> +
> +.. parsed-literal::
> +
> +    output0 =
> +    0xd2399179, 0x640eb999, 0x2cbaf577, 0xaf224ae2, 0x9d139927, 0xe6909b29,
> +    0xa25b7f47, 0x2aa224ce, 0x79f2
> +
> +
> +uint8_t value
> +
> +.. parsed-literal::
> +
> +    basegraph=
> +    1
> +
> +uint16_t value
> +
> +.. parsed-literal::
> +
> +    z_c=
> +    52
> +
> +uint16_t value
> +
> +.. parsed-literal::
> +
> +    n_cb=
> +    3432
> +
> +uint8_t value
> +
> +.. parsed-literal::
> +
> +    q_m=
> +    6
> +
> +uint16_t value
> +
> +.. parsed-literal::
> +
> +    n_filler=
> +    0
> +
> +uint32_t value
> +
> +.. parsed-literal::
> +
> +    e =
> +    1380
> +
> +uint8_t value
> +
> +.. parsed-literal::
> +
> +    rv_index =
> +    1
> +
> +uint8_t value
> +
> +.. parsed-literal::
> +
> +    code_block_mode =
> +    1
> +
> +
> +Chain of flags for LDPC encoder operation based on the
> +rte_bbdev_op_ldpcenc_flag_bitmasks:
>   
>   .. parsed-literal::
>   
>       op_flags =
> -    RTE_BBDEV_TURBO_RATE_MATCH
> +    RTE_BBDEV_LDPC_RATE_MATCH
>   
>   Chain of operation statuses that are expected after operation is performed.
>   Following statuses can be used:

  reply index

Thread overview: 115+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-27  4:38 [dpdk-dev] [PATCH v1 00/14] bbdev new features Nicolas Chautru
2020-02-27  4:38 ` [dpdk-dev] [PATCH v1 01/14] bbdev: add capability flag for filler bits inclusion in HARQ Nicolas Chautru
2020-02-27  4:38 ` [dpdk-dev] [PATCH v1 02/14] bbdev: expose device HARQ buffer size at device level Nicolas Chautru
2020-02-27  4:38 ` [dpdk-dev] [PATCH v1 03/14] baseband/turbo_sw: fix the exposed LLR decimals assumption Nicolas Chautru
2020-02-27  4:38 ` [dpdk-dev] [PATCH v1 04/14] baseband/turbo_sw: support large size code block Nicolas Chautru
2020-02-27  4:38 ` [dpdk-dev] [PATCH v1 05/14] test-bbdev: rename FPGA LTE macros to be more explicit Nicolas Chautru
2020-02-27  4:39 ` [dpdk-dev] [PATCH v1 06/14] test-bbdev: support HARQ validation Nicolas Chautru
2020-02-27  4:39 ` [dpdk-dev] [PATCH v1 07/14] test-bbdev: support for performance tests Nicolas Chautru
2020-02-27  4:39 ` [dpdk-dev] [PATCH v1 08/14] test-bbdev: support for LDPC interrupt test Nicolas Chautru
2020-02-27  4:39 ` [dpdk-dev] [PATCH v1 09/14] test-bbdev: support for offload test for LDPC Nicolas Chautru
2020-02-27  4:39 ` [dpdk-dev] [PATCH v1 10/14] test-bbdev: vectors update Nicolas Chautru
2020-02-27  4:39 ` [dpdk-dev] [PATCH v1 11/14] doc: update of testbbdev documentation Nicolas Chautru
2020-02-27  4:39 ` [dpdk-dev] [PATCH v1 12/14] drivers/baseband: add PMD for FPGA 5GNR FEC Nicolas Chautru
2020-02-27  4:39 ` [dpdk-dev] [PATCH v1 13/14] test-bbdev: add support for FPGA driver initialization Nicolas Chautru
2020-02-27  4:39 ` [dpdk-dev] [PATCH v1 14/14] doc: add feature matrix table for bbdev devices Nicolas Chautru
2020-03-04 18:22   ` [dpdk-dev] [PATCH v2 00/15] bbdev new features Nicolas Chautru
2020-03-04 18:22     ` [dpdk-dev] [PATCH v2 01/15] bbdev: add capability flag for filler bits inclusion in HARQ Nicolas Chautru
2020-03-04 18:22     ` [dpdk-dev] [PATCH v2 02/15] bbdev: expose device HARQ buffer size at device level Nicolas Chautru
2020-03-04 18:22     ` [dpdk-dev] [PATCH v2 03/15] baseband/turbo_sw: fix the exposed LLR decimals assumption Nicolas Chautru
2020-03-04 18:22     ` [dpdk-dev] [PATCH v2 04/15] baseband/turbo_sw: support large size code block Nicolas Chautru
2020-03-04 18:22     ` [dpdk-dev] [PATCH v2 05/15] test-bbdev: rename FPGA LTE macros to be more explicit Nicolas Chautru
2020-03-04 18:22     ` [dpdk-dev] [PATCH v2 06/15] test-bbdev: support HARQ validation Nicolas Chautru
2020-03-04 18:22     ` [dpdk-dev] [PATCH v2 07/15] test-bbdev: support for performance tests Nicolas Chautru
2020-03-04 18:22     ` [dpdk-dev] [PATCH v2 08/15] test-bbdev: support for LDPC interrupt test Nicolas Chautru
2020-03-04 18:22     ` [dpdk-dev] [PATCH v2 09/15] test-bbdev: support for offload test for LDPC Nicolas Chautru
2020-03-04 18:22     ` [dpdk-dev] [PATCH v2 10/15] test-bbdev: vectors update Nicolas Chautru
2020-03-04 18:22     ` [dpdk-dev] [PATCH v2 11/15] doc: update of testbbdev documentation Nicolas Chautru
2020-03-04 18:22     ` [dpdk-dev] [PATCH v2 12/15] drivers/baseband: add PMD for FPGA 5GNR FEC Nicolas Chautru
2020-03-04 18:22     ` [dpdk-dev] [PATCH v2 13/15] test-bbdev: add support for FPGA driver initialization Nicolas Chautru
2020-03-04 18:22     ` [dpdk-dev] [PATCH v2 14/15] doc: add feature matrix table for bbdev devices Nicolas Chautru
2020-03-04 18:22     ` [dpdk-dev] [PATCH v2 15/15] doc: add release note for bbdev PMD update Nicolas Chautru
2020-03-04 18:54   ` [dpdk-dev] [PATCH v3 00/14] bbdev new features Nicolas Chautru
2020-03-04 18:54     ` [dpdk-dev] [PATCH v3 01/14] bbdev: add capability flag for filler bits inclusion in HARQ Nicolas Chautru
2020-03-13 10:42       ` Dave Burley
2020-03-25  9:53       ` Akhil Goyal
2020-03-26  2:47         ` Chautru, Nicolas
2020-03-04 18:54     ` [dpdk-dev] [PATCH v3 02/14] bbdev: expose device HARQ buffer size at device level Nicolas Chautru
2020-03-13 10:47       ` Dave Burley
2020-03-04 18:54     ` [dpdk-dev] [PATCH v3 03/14] baseband/turbo_sw: fix the exposed LLR decimals assumption Nicolas Chautru
2020-03-04 18:54     ` [dpdk-dev] [PATCH v3 04/14] baseband/turbo_sw: support large size code block Nicolas Chautru
2020-03-13 16:10       ` Dave Burley
2020-03-25 10:18       ` Akhil Goyal
2020-03-26  2:50         ` Chautru, Nicolas
2020-03-04 18:54     ` [dpdk-dev] [PATCH v3 05/14] test-bbdev: rename FPGA LTE macros to be more explicit Nicolas Chautru
2020-03-13 10:55       ` Dave Burley
2020-03-04 18:54     ` [dpdk-dev] [PATCH v3 06/14] test-bbdev: support HARQ validation Nicolas Chautru
2020-03-25 13:23       ` Akhil Goyal
2020-03-26  2:53         ` Chautru, Nicolas
2020-03-04 18:54     ` [dpdk-dev] [PATCH v3 07/14] test-bbdev: support for performance tests Nicolas Chautru
2020-03-13 10:58       ` Dave Burley
2020-03-25 13:47       ` Akhil Goyal
2020-03-26  2:56         ` Chautru, Nicolas
2020-03-04 18:54     ` [dpdk-dev] [PATCH v3 08/14] test-bbdev: support for LDPC interrupt test Nicolas Chautru
2020-03-13 10:59       ` Dave Burley
2020-03-04 18:54     ` [dpdk-dev] [PATCH v3 09/14] test-bbdev: support for offload test for LDPC Nicolas Chautru
2020-03-25 13:54       ` Akhil Goyal
2020-03-26  2:57         ` Chautru, Nicolas
2020-03-04 18:54     ` [dpdk-dev] [PATCH v3 10/14] test-bbdev: vectors update Nicolas Chautru
2020-03-13 11:02       ` Dave Burley
2020-03-25 13:58       ` Akhil Goyal
2020-03-26  2:59         ` Chautru, Nicolas
2020-03-04 18:54     ` [dpdk-dev] [PATCH v3 11/14] doc: update of testbbdev documentation Nicolas Chautru
2020-03-13 11:03       ` Dave Burley [this message]
2020-03-25 14:48       ` Akhil Goyal
2020-03-26  3:02         ` Chautru, Nicolas
2020-03-04 18:55     ` [dpdk-dev] [PATCH v3 12/14] drivers/baseband: add PMD for FPGA 5GNR FEC Nicolas Chautru
2020-03-13 11:03       ` Dave Burley
2020-03-25 14:59       ` Akhil Goyal
2020-03-26  3:16         ` Chautru, Nicolas
2020-03-26  5:27           ` Akhil Goyal
2020-03-30  0:09             ` Chautru, Nicolas
2020-03-04 18:55     ` [dpdk-dev] [PATCH v3 13/14] test-bbdev: add support for FPGA driver initialization Nicolas Chautru
2020-03-13 11:05       ` Dave Burley
2020-03-04 18:55     ` [dpdk-dev] [PATCH v3 14/14] doc: add feature matrix table for bbdev devices Nicolas Chautru
2020-03-13 11:05       ` Dave Burley
2020-03-12 20:10     ` [dpdk-dev] [PATCH v3 00/14] bbdev new features Chautru, Nicolas
2020-03-13  7:15       ` Akhil Goyal
2020-03-24 23:47         ` Chautru, Nicolas
2020-03-26  2:45   ` [dpdk-dev] [PATCH v4 00/10] " Nicolas Chautru
2020-03-26  2:45     ` [dpdk-dev] [PATCH v4 01/10] bbdev: add capability flag for filler bits inclusion in HARQ Nicolas Chautru
2020-03-26  2:45     ` [dpdk-dev] [PATCH v4 02/10] bbdev: expose device HARQ buffer size at device level Nicolas Chautru
2020-03-26  2:45     ` [dpdk-dev] [PATCH v4 03/10] baseband/turbo_sw: fix the exposed LLR decimals assumption Nicolas Chautru
2020-03-26  2:45     ` [dpdk-dev] [PATCH v4 04/10] baseband/turbo_sw: support large size code block Nicolas Chautru
2020-03-26  2:45     ` [dpdk-dev] [PATCH v4 05/10] test-bbdev: rename FPGA LTE macros to be more explicit Nicolas Chautru
2020-03-26  2:45     ` [dpdk-dev] [PATCH v4 06/10] test-bbdev: support HARQ validation Nicolas Chautru
2020-03-26  2:45     ` [dpdk-dev] [PATCH v4 07/10] test-bbdev: support for performance tests Nicolas Chautru
2020-03-26  2:45     ` [dpdk-dev] [PATCH v4 08/10] test-bbdev: support for LDPC interrupt test Nicolas Chautru
2020-03-26  2:45     ` [dpdk-dev] [PATCH v4 09/10] test-bbdev: support for offload test for LDPC Nicolas Chautru
2020-03-26  2:45     ` [dpdk-dev] [PATCH v4 10/10] test-bbdev: vectors update Nicolas Chautru
2020-03-26  3:27   ` [dpdk-dev] [PATCH v5 00/10] bbdev new features Nicolas Chautru
2020-03-26  3:27     ` [dpdk-dev] [PATCH v5 01/10] bbdev: add capability flag for filler bits inclusion in HARQ Nicolas Chautru
2020-03-27 11:44       ` Dave Burley
2020-03-26  3:27     ` [dpdk-dev] [PATCH v5 02/10] bbdev: expose device HARQ buffer size at device level Nicolas Chautru
2020-03-27 11:45       ` Dave Burley
2020-03-26  3:27     ` [dpdk-dev] [PATCH v5 03/10] baseband/turbo_sw: fix the exposed LLR decimals assumption Nicolas Chautru
2020-03-27 11:45       ` Dave Burley
2020-03-26  3:27     ` [dpdk-dev] [PATCH v5 04/10] baseband/turbo_sw: support large size code block Nicolas Chautru
2020-03-27 11:45       ` Dave Burley
2020-03-26  3:27     ` [dpdk-dev] [PATCH v5 05/10] test-bbdev: rename FPGA LTE macros to be more explicit Nicolas Chautru
2020-03-27 11:45       ` Dave Burley
2020-03-26  3:27     ` [dpdk-dev] [PATCH v5 06/10] test-bbdev: support HARQ validation Nicolas Chautru
2020-03-27 11:47       ` Dave Burley
2020-03-26  3:27     ` [dpdk-dev] [PATCH v5 07/10] test-bbdev: support for performance tests Nicolas Chautru
2020-03-27 11:47       ` Dave Burley
2020-03-26  3:27     ` [dpdk-dev] [PATCH v5 08/10] test-bbdev: support for LDPC interrupt test Nicolas Chautru
2020-03-27 11:47       ` Dave Burley
2020-03-26  3:27     ` [dpdk-dev] [PATCH v5 09/10] test-bbdev: support for offload test for LDPC Nicolas Chautru
2020-03-27 11:47       ` Dave Burley
2020-03-26  3:27     ` [dpdk-dev] [PATCH v5 10/10] test-bbdev: vectors update Nicolas Chautru
2020-03-27 11:47       ` Dave Burley
2020-03-27 11:43     ` [dpdk-dev] [PATCH v5 00/10] bbdev new features Dave Burley
2020-04-05 16:41     ` Akhil Goyal
2020-03-03 18:08 ` [dpdk-dev] [PATCH v1 00/14] " Chautru, Nicolas
2020-03-04  8:23   ` Thomas Monjalon
2020-03-04 18:28     ` Chautru, Nicolas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=69da286d-4177-75eb-79cf-256c066bcf54@accelercomm.com \
    --to=dave.burley@accelercomm.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK-dev Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/dpdk-dev/0 dpdk-dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dpdk-dev dpdk-dev/ https://lore.kernel.org/dpdk-dev \
		dev@dpdk.org
	public-inbox-index dpdk-dev

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git