DPDK-dev Archive on lore.kernel.org
 help / color / Atom feed
From: Andrzej Ostruszka <amo@semihalf.com>
To: dev@dpdk.org
Subject: Re: [dpdk-dev] [PATCH v4 27/29] l3fwd-graph: add graph config and main loop
Date: Fri, 10 Apr 2020 01:04:00 +0200
Message-ID: <8b4a122f-9d59-ddb3-8187-63f1e57e3d25@semihalf.com> (raw)
In-Reply-To: <20200405085613.1336841-28-jerinj@marvell.com>

On 4/5/20 10:56 AM, jerinj@marvell.com wrote:
> From: Nithin Dabilpuram <ndabilpuram@marvell.com>
> 
> Add graph creation, configuration logic and graph main loop.
> This graph main loop is run on every slave lcore and calls
> rte_graph_walk() to walk over lcore specific rte_graph.
> Master core accumulates and prints graph walk stats of all the
> lcore's graph's.
> 
> Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
> ---
[...]
> @@ -826,11 +936,26 @@ main(int argc, char **argv)
>  					 "port=%d\n",
>  					 ret, portid);
>  
> +			/* Add this queue node to its graph */
> +			snprintf(qconf->rx_queue_list[queue].node_name,
> +				 RTE_NODE_NAMESIZE, "ethdev_rx-%u-%u", portid,
> +				 queueid);
> +		}
> +
> +		/* Alloc a graph to this lcore only if source exists  */
> +		if (qconf->n_rx_queue) {
> +			qconf->graph_id = nb_graphs;

See below for a comment related to that.

> +			nb_graphs++;
>  		}
>  	}
>  
>  	printf("\n");
>  
> +	/* Ethdev node config, skip rx queue mapping */
> +	ret = rte_node_eth_config(ethdev_conf, nb_conf, nb_graphs);
> +	if (ret)
> +		rte_exit(EXIT_FAILURE, "rte_node_eth_config: err=%d\n", ret);
> +
>  	/* Start ports */
>  	RTE_ETH_FOREACH_DEV(portid)
>  	{
> @@ -858,6 +983,119 @@ main(int argc, char **argv)
>  
>  	check_all_ports_link_status(enabled_port_mask);
>  
> +	/* Graph Initialization */
> +	memset(&graph_conf, 0, sizeof(graph_conf));
> +	graph_conf.node_patterns = node_patterns;
> +	nb_patterns = RTE_DIM(node_patterns);
> +
> +	for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
> +		rte_graph_t graph_id;
> +		rte_edge_t i;
> +
> +		if (rte_lcore_is_enabled(lcore_id) == 0)
> +			continue;
> +
> +		qconf = &lcore_conf[lcore_id];
> +
> +		/* Skip graph creation if no source exists */
> +		if (!qconf->n_rx_queue)
> +			continue;
> +
> +		/* Add rx node patterns of this lcore */
> +		for (i = 0; i < qconf->n_rx_queue; i++) {
> +			graph_conf.node_patterns[nb_patterns + i] =
> +				qconf->rx_queue_list[i].node_name;
> +		}
> +
> +		graph_conf.nb_node_patterns = nb_patterns + i;
> +		graph_conf.socket_id = rte_lcore_to_socket_id(lcore_id);
> +
> +		snprintf(qconf->name, sizeof(qconf->name), "worker_%u",
> +			 lcore_id);
> +
> +		graph_id = rte_graph_create(qconf->name, &graph_conf);
> +		if (graph_id != qconf->graph_id)
> +			rte_exit(EXIT_FAILURE,
> +				 "rte_graph_create(): graph_id=%d not "
> +				 " as expected for lcore %u(%u\n",
> +				 graph_id, lcore_id, qconf->graph_id);

Should application be checking graph implementation?  Maybe just check
that it is not "invalid" and here store it to qconf->graph_id?

> +
> +		qconf->graph = rte_graph_lookup(qconf->name);
> +		if (!qconf->graph)
> +			rte_exit(EXIT_FAILURE,
> +				 "rte_graph_lookup(): graph %s not found\n",
> +				 qconf->name);
> +	}
> +
> +	memset(&rewrite_data, 0, sizeof(rewrite_data));
> +	rewrite_len = sizeof(rewrite_data);
> +
> +	/* Add route to ip4 graph infra */
> +	for (i = 0; i < IPV4_L3FWD_LPM_NUM_ROUTES; i++) {
> +		char route_str[INET6_ADDRSTRLEN * 4];
> +		char abuf[INET6_ADDRSTRLEN];
> +		struct in_addr in;
> +		uint32_t dst_port;
> +		uint16_t next_hop;
> +
> +		/* Skip unused ports */
> +		if ((1 << ipv4_l3fwd_lpm_route_array[i].if_out &
> +		     enabled_port_mask) == 0)
> +			continue;
> +
> +		dst_port = ipv4_l3fwd_lpm_route_array[i].if_out;
> +		next_hop = i;

What is the difference between next_hop and i?  It looks to me like they
both have the same type and value.  So maybe instead of another object
just add comment to route_add() below?  No strong feeling here so you
can ignore this comment.

> +
> +		in.s_addr = htonl(ipv4_l3fwd_lpm_route_array[i].ip);
> +		snprintf(route_str, sizeof(route_str), "%s / %d (%d)",
> +			 inet_ntop(AF_INET, &in, abuf, sizeof(abuf)),
> +			 ipv4_l3fwd_lpm_route_array[i].depth,
> +			 ipv4_l3fwd_lpm_route_array[i].if_out);
> +
> +		ret = rte_node_ip4_route_add(
> +			ipv4_l3fwd_lpm_route_array[i].ip,
> +			ipv4_l3fwd_lpm_route_array[i].depth, next_hop,
> +			RTE_NODE_IP4_LOOKUP_NEXT_REWRITE);
> +

With regards
Andrzej Ostruszka

  reply index

Thread overview: 219+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-18 21:35 [dpdk-dev] [PATCH v1 00/26] graph: introduce graph subsystem jerinj
2020-03-18 21:35 ` [dpdk-dev] [PATCH v1 01/26] graph: define the public API for graph support jerinj
2020-03-18 21:35 ` [dpdk-dev] [PATCH v1 02/26] graph: implement node registration jerinj
2020-03-18 21:35 ` [dpdk-dev] [PATCH v1 03/26] graph: implement node operations jerinj
2020-03-18 21:35 ` [dpdk-dev] [PATCH v1 04/26] graph: implement node debug routines jerinj
2020-03-18 21:35 ` [dpdk-dev] [PATCH v1 05/26] graph: implement internal graph operation helpers jerinj
2020-03-18 21:35 ` [dpdk-dev] [PATCH v1 06/26] graph: populate fastpath memory for graph reel jerinj
2020-03-18 21:35 ` [dpdk-dev] [PATCH v1 07/26] graph: implement create and destroy APIs jerinj
2020-03-18 21:35 ` [dpdk-dev] [PATCH v1 08/26] graph: implement graph operation APIs jerinj
2020-03-18 21:35 ` [dpdk-dev] [PATCH v1 09/26] graph: implement Graphviz export jerinj
2020-03-18 21:35 ` [dpdk-dev] [PATCH v1 10/26] graph: implement debug routines jerinj
2020-03-18 21:35 ` [dpdk-dev] [PATCH v1 11/26] graph: implement stats support jerinj
2020-03-18 21:35 ` [dpdk-dev] [PATCH v1 12/26] graph: implement fastpath API routines jerinj
2020-03-18 21:35 ` [dpdk-dev] [PATCH v1 13/26] graph: add unit test case jerinj
2020-03-18 21:35 ` [dpdk-dev] [PATCH v1 14/26] graph: add performance testcase jerinj
2020-03-18 21:35 ` [dpdk-dev] [PATCH v1 15/26] node: add log infra and null node jerinj
2020-03-18 21:35 ` [dpdk-dev] [PATCH v1 16/26] node: add ethdev Rx node jerinj
2020-03-18 21:35 ` [dpdk-dev] [PATCH v1 17/26] node: add ethdev Tx node jerinj
2020-03-18 21:35 ` [dpdk-dev] [PATCH v1 18/26] node: add ethdev Rx and Tx node ctrl API jerinj
2020-03-18 21:35 ` [dpdk-dev] [PATCH v1 19/26] node: ipv4 lookup for arm64 jerinj
2020-03-18 21:35 ` [dpdk-dev] [PATCH v1 20/26] node: ipv4 lookup for x86 jerinj
2020-03-19 12:25   ` Ray Kinsella
2020-03-19 14:22     ` [dpdk-dev] [EXT] " Pavan Nikhilesh Bhagavatula
2020-03-19 15:50       ` Ray Kinsella
2020-03-19 16:13         ` Pavan Nikhilesh Bhagavatula
2020-03-20  9:14           ` Ray Kinsella
2020-03-24  9:40             ` Pavan Nikhilesh Bhagavatula
2020-03-24 14:38               ` Ray Kinsella
2020-03-26  9:56                 ` Pavan Nikhilesh Bhagavatula
2020-03-26 16:54                   ` Ray Kinsella
2020-03-18 21:35 ` [dpdk-dev] [PATCH v1 21/26] node: add ipv4 rewrite node jerinj
2020-03-18 21:35 ` [dpdk-dev] [PATCH v1 22/26] node: add ipv4 rewrite and lookup ctrl API jerinj
2020-03-18 21:35 ` [dpdk-dev] [PATCH v1 23/26] node: add pkt drop node jerinj
2020-03-18 21:35 ` [dpdk-dev] [PATCH v1 24/26] l3fwd-graph: add graph based l3fwd skeleton jerinj
2020-03-18 21:35 ` [dpdk-dev] [PATCH v1 25/26] l3fwd-graph: add ethdev configuration changes jerinj
2020-03-18 21:35 ` [dpdk-dev] [PATCH v1 26/26] l3fwd-graph: add graph config and main loop jerinj
2020-03-26 16:56 ` [dpdk-dev] [PATCH v2 00/28] graph: introduce graph subsystem jerinj
2020-03-26 16:56   ` [dpdk-dev] [PATCH v2 01/28] graph: define the public API for graph support jerinj
2020-03-26 16:56   ` [dpdk-dev] [PATCH v2 02/28] graph: implement node registration jerinj
2020-03-26 16:56   ` [dpdk-dev] [PATCH v2 03/28] graph: implement node operations jerinj
2020-03-26 16:56   ` [dpdk-dev] [PATCH v2 04/28] graph: implement node debug routines jerinj
2020-03-26 16:56   ` [dpdk-dev] [PATCH v2 05/28] graph: implement internal graph operation helpers jerinj
2020-03-26 16:56   ` [dpdk-dev] [PATCH v2 06/28] graph: populate fastpath memory for graph reel jerinj
2020-03-26 16:56   ` [dpdk-dev] [PATCH v2 07/28] graph: implement create and destroy APIs jerinj
2020-03-26 16:56   ` [dpdk-dev] [PATCH v2 08/28] graph: implement graph operation APIs jerinj
2020-03-26 16:56   ` [dpdk-dev] [PATCH v2 09/28] graph: implement Graphviz export jerinj
2020-03-26 16:56   ` [dpdk-dev] [PATCH v2 10/28] graph: implement debug routines jerinj
2020-03-26 16:56   ` [dpdk-dev] [PATCH v2 11/28] graph: implement stats support jerinj
2020-03-26 16:56   ` [dpdk-dev] [PATCH v2 12/28] graph: implement fastpath API routines jerinj
2020-03-26 16:56   ` [dpdk-dev] [PATCH v2 13/28] graph: add unit test case jerinj
2020-03-26 16:56   ` [dpdk-dev] [PATCH v2 14/28] graph: add performance testcase jerinj
2020-03-26 16:56   ` [dpdk-dev] [PATCH v2 15/28] node: add log infra and null node jerinj
2020-03-26 16:56   ` [dpdk-dev] [PATCH v2 16/28] node: add ethdev Rx node jerinj
2020-03-26 16:56   ` [dpdk-dev] [PATCH v2 17/28] node: add ethdev Tx node jerinj
2020-03-26 16:56   ` [dpdk-dev] [PATCH v2 18/28] node: add ethdev Rx and Tx node ctrl API jerinj
2020-03-26 16:56   ` [dpdk-dev] [PATCH v2 19/28] node: ipv4 lookup for arm64 jerinj
2020-03-26 16:56   ` [dpdk-dev] [PATCH v2 20/28] node: ipv4 lookup for x86 jerinj
2020-03-27  8:40     ` Jerin Jacob
2020-03-26 16:56   ` [dpdk-dev] [PATCH v2 21/28] node: add ipv4 rewrite node jerinj
2020-03-26 16:56   ` [dpdk-dev] [PATCH v2 22/28] node: add ipv4 rewrite and lookup ctrl API jerinj
2020-03-26 16:56   ` [dpdk-dev] [PATCH v2 23/28] node: add pkt drop node jerinj
2020-03-26 16:56   ` [dpdk-dev] [PATCH v2 24/28] l3fwd-graph: add graph based l3fwd skeleton jerinj
2020-03-26 16:56   ` [dpdk-dev] [PATCH v2 25/28] l3fwd-graph: add ethdev configuration changes jerinj
2020-03-26 16:56   ` [dpdk-dev] [PATCH v2 26/28] l3fwd-graph: add graph config and main loop jerinj
2020-03-26 16:56   ` [dpdk-dev] [PATCH v2 27/28] doc: add graph library programmer's guide guide jerinj
2020-03-26 16:56   ` [dpdk-dev] [PATCH v2 28/28] doc: add l3fwd graph application user guide jerinj
2020-03-27  6:49   ` [dpdk-dev] [PATCH v2 00/28] graph: introduce graph subsystem Jerin Jacob
2020-03-27 10:42     ` Thomas Monjalon
2020-03-31 19:29   ` [dpdk-dev] [PATCH v3 00/29] " jerinj
2020-03-31 19:29     ` [dpdk-dev] [PATCH v3 01/29] graph: define the public API for graph support jerinj
2020-04-03  9:26       ` Wang, Xiao W
2020-04-04 12:15         ` Jerin Jacob
2020-04-06 12:36       ` Andrzej Ostruszka
2020-04-06 14:59         ` Jerin Jacob
2020-04-06 16:09           ` Andrzej Ostruszka
2020-04-07 10:27             ` Jerin Jacob
2020-03-31 19:29     ` [dpdk-dev] [PATCH v3 02/29] graph: implement node registration jerinj
2020-04-03 10:44       ` Wang, Xiao W
2020-04-04 12:29         ` Jerin Jacob
2020-03-31 19:29     ` [dpdk-dev] [PATCH v3 03/29] graph: implement node operations jerinj
2020-04-03 10:54       ` Wang, Xiao W
2020-04-04 13:07         ` Jerin Jacob
2020-03-31 19:29     ` [dpdk-dev] [PATCH v3 04/29] graph: implement node debug routines jerinj
2020-04-04  7:57       ` Wang, Xiao W
2020-04-04 13:12         ` Jerin Jacob
2020-03-31 19:29     ` [dpdk-dev] [PATCH v3 05/29] graph: implement internal graph operation helpers jerinj
2020-04-06 13:47       ` Wang, Xiao W
2020-04-06 14:08         ` Jerin Jacob
2020-03-31 19:29     ` [dpdk-dev] [PATCH v3 06/29] graph: populate fastpath memory for graph reel jerinj
2020-03-31 19:29     ` [dpdk-dev] [PATCH v3 07/29] graph: implement create and destroy APIs jerinj
2020-03-31 19:29     ` [dpdk-dev] [PATCH v3 08/29] graph: implement graph operation APIs jerinj
2020-03-31 19:29     ` [dpdk-dev] [PATCH v3 09/29] graph: implement Graphviz export jerinj
2020-03-31 19:29     ` [dpdk-dev] [PATCH v3 10/29] graph: implement debug routines jerinj
2020-03-31 19:29     ` [dpdk-dev] [PATCH v3 11/29] graph: implement stats support jerinj
2020-03-31 19:29     ` [dpdk-dev] [PATCH v3 12/29] graph: implement fastpath API routines jerinj
2020-03-31 19:29     ` [dpdk-dev] [PATCH v3 13/29] graph: add unit test case jerinj
2020-03-31 19:29     ` [dpdk-dev] [PATCH v3 14/29] graph: add performance testcase jerinj
2020-03-31 19:29     ` [dpdk-dev] [PATCH v3 15/29] node: add log infra and null node jerinj
2020-03-31 19:29     ` [dpdk-dev] [PATCH v3 16/29] node: add ethdev Rx node jerinj
2020-03-31 19:29     ` [dpdk-dev] [PATCH v3 17/29] node: add ethdev Tx node jerinj
2020-03-31 19:29     ` [dpdk-dev] [PATCH v3 18/29] node: add ethdev Rx and Tx node ctrl API jerinj
2020-03-31 19:29     ` [dpdk-dev] [PATCH v3 19/29] node: add generic ipv4 lookup node jerinj
2020-03-31 19:29     ` [dpdk-dev] [PATCH v3 20/29] node: ipv4 lookup for arm64 jerinj
2020-03-31 19:29     ` [dpdk-dev] [PATCH v3 21/29] node: ipv4 lookup for x86 jerinj
2020-03-31 19:29     ` [dpdk-dev] [PATCH v3 22/29] node: add ipv4 rewrite node jerinj
2020-03-31 19:29     ` [dpdk-dev] [PATCH v3 23/29] node: add ipv4 rewrite and lookup ctrl API jerinj
2020-03-31 19:29     ` [dpdk-dev] [PATCH v3 24/29] node: add packet drop node jerinj
2020-03-31 19:29     ` [dpdk-dev] [PATCH v3 25/29] l3fwd-graph: add graph based l3fwd skeleton jerinj
2020-03-31 19:29     ` [dpdk-dev] [PATCH v3 26/29] l3fwd-graph: add ethdev configuration changes jerinj
2020-03-31 19:29     ` [dpdk-dev] [PATCH v3 27/29] l3fwd-graph: add graph config and main loop jerinj
2020-03-31 19:29     ` [dpdk-dev] [PATCH v3 28/29] doc: add graph library programmer's guide guide jerinj
2020-03-31 19:29     ` [dpdk-dev] [PATCH v3 29/29] doc: add l3fwd graph application user guide jerinj
2020-04-05  8:55     ` [dpdk-dev] [PATCH v4 00/29] graph: introduce graph subsystem jerinj
2020-04-05  8:55       ` [dpdk-dev] [PATCH v4 01/29] graph: define the public API for graph support jerinj
2020-04-05  8:55       ` [dpdk-dev] [PATCH v4 02/29] graph: implement node registration jerinj
2020-04-05  8:55       ` [dpdk-dev] [PATCH v4 03/29] graph: implement node operations jerinj
2020-04-06 17:57         ` Andrzej Ostruszka
2020-04-07  2:43           ` [dpdk-dev] [EXT] " Kiran Kumar Kokkilagadda
2020-04-07  8:47             ` Andrzej Ostruszka
2020-04-07 10:20             ` Jerin Jacob
2020-04-05  8:55       ` [dpdk-dev] [PATCH v4 04/29] graph: implement node debug routines jerinj
2020-04-06 18:17         ` Andrzej Ostruszka
2020-04-07 10:22           ` Jerin Jacob
2020-04-07 11:50             ` Andrzej Ostruszka
2020-04-07 12:09               ` Jerin Jacob
2020-04-07 12:50                 ` Andrzej Ostruszka
2020-04-05  8:55       ` [dpdk-dev] [PATCH v4 05/29] graph: implement internal graph operation helpers jerinj
2020-04-07 12:16         ` Andrzej Ostruszka
2020-04-07 12:27           ` Jerin Jacob
2020-04-07 12:54             ` Andrzej Ostruszka
2020-04-07 13:31               ` Jerin Jacob
2020-04-05  8:55       ` [dpdk-dev] [PATCH v4 06/29] graph: populate fastpath memory for graph reel jerinj
2020-04-08 17:30         ` Andrzej Ostruszka
2020-04-09  2:44           ` Kiran Kumar Kokkilagadda
2020-04-05  8:55       ` [dpdk-dev] [PATCH v4 07/29] graph: implement create and destroy APIs jerinj
2020-04-08 16:57         ` Andrzej Ostruszka
2020-04-08 17:23           ` Jerin Jacob
2020-04-05  8:55       ` [dpdk-dev] [PATCH v4 08/29] graph: implement graph operation APIs jerinj
2020-04-08 17:49         ` Andrzej Ostruszka
2020-04-08 19:18           ` Jerin Jacob
2020-04-05  8:55       ` [dpdk-dev] [PATCH v4 09/29] graph: implement Graphviz export jerinj
2020-04-05  8:55       ` [dpdk-dev] [PATCH v4 10/29] graph: implement debug routines jerinj
2020-04-05  8:55       ` [dpdk-dev] [PATCH v4 11/29] graph: implement stats support jerinj
2020-04-05  8:55       ` [dpdk-dev] [PATCH v4 12/29] graph: implement fastpath API routines jerinj
2020-04-09 23:07         ` Andrzej Ostruszka
2020-04-10  9:18           ` Jerin Jacob
2020-04-05  8:55       ` [dpdk-dev] [PATCH v4 13/29] graph: add unit test case jerinj
2020-04-05  8:55       ` [dpdk-dev] [PATCH v4 14/29] graph: add performance testcase jerinj
2020-04-05  8:55       ` [dpdk-dev] [PATCH v4 15/29] node: add log infra and null node jerinj
2020-04-05  8:56       ` [dpdk-dev] [PATCH v4 16/29] node: add ethdev Rx node jerinj
2020-04-09 23:05         ` Andrzej Ostruszka
2020-04-10  7:00           ` Nithin Dabilpuram
2020-04-05  8:56       ` [dpdk-dev] [PATCH v4 17/29] node: add ethdev Tx node jerinj
2020-04-05  8:56       ` [dpdk-dev] [PATCH v4 18/29] node: add ethdev Rx and Tx node ctrl API jerinj
2020-04-09 23:07         ` Andrzej Ostruszka
2020-04-10  5:09           ` Nithin Dabilpuram
2020-04-10  8:22             ` Nithin Dabilpuram
2020-04-10 12:52             ` Andrzej Ostruszka
2020-04-10 14:54               ` [dpdk-dev] [EXT] " Nithin Dabilpuram
2020-04-05  8:56       ` [dpdk-dev] [PATCH v4 19/29] node: add generic ipv4 lookup node jerinj
2020-04-09 23:07         ` Andrzej Ostruszka
2020-04-10 10:20           ` Nithin Dabilpuram
2020-04-10 14:41             ` Nithin Dabilpuram
2020-04-10 15:17               ` Andrzej Ostruszka
2020-04-05  8:56       ` [dpdk-dev] [PATCH v4 20/29] node: ipv4 lookup for arm64 jerinj
2020-04-05  8:56       ` [dpdk-dev] [PATCH v4 21/29] node: ipv4 lookup for x86 jerinj
2020-04-05  8:56       ` [dpdk-dev] [PATCH v4 22/29] node: add ipv4 rewrite node jerinj
2020-04-05  8:56       ` [dpdk-dev] [PATCH v4 23/29] node: add ipv4 rewrite and lookup ctrl API jerinj
2020-04-09 23:04         ` Andrzej Ostruszka
2020-04-10  7:24           ` Nithin Dabilpuram
2020-04-05  8:56       ` [dpdk-dev] [PATCH v4 24/29] node: add packet drop node jerinj
2020-04-05  8:56       ` [dpdk-dev] [PATCH v4 25/29] l3fwd-graph: add graph based l3fwd skeleton jerinj
2020-04-09 23:04         ` Andrzej Ostruszka
2020-04-10  8:23           ` Nithin Dabilpuram
2020-04-05  8:56       ` [dpdk-dev] [PATCH v4 26/29] l3fwd-graph: add ethdev configuration changes jerinj
2020-04-05  8:56       ` [dpdk-dev] [PATCH v4 27/29] l3fwd-graph: add graph config and main loop jerinj
2020-04-09 23:04         ` Andrzej Ostruszka [this message]
2020-04-10  9:29           ` Nithin Dabilpuram
2020-04-05  8:56       ` [dpdk-dev] [PATCH v4 28/29] doc: add graph library programmer's guide guide jerinj
2020-04-05  8:56       ` [dpdk-dev] [PATCH v4 29/29] doc: add l3fwd graph application user guide jerinj
2020-04-09 23:13       ` [dpdk-dev] [PATCH v4 00/29] graph: introduce graph subsystem Andrzej Ostruszka
2020-04-10  9:07         ` Jerin Jacob
2020-04-11 14:13       ` [dpdk-dev] [PATCH v5 " jerinj
2020-04-11 14:14         ` [dpdk-dev] [PATCH v5 01/29] graph: define the public API for graph support jerinj
2020-04-11 14:14         ` [dpdk-dev] [PATCH v5 02/29] graph: implement node registration jerinj
2020-04-11 14:14         ` [dpdk-dev] [PATCH v5 03/29] graph: implement node operations jerinj
2020-04-11 14:14         ` [dpdk-dev] [PATCH v5 04/29] graph: implement node debug routines jerinj
2020-04-11 14:14         ` [dpdk-dev] [PATCH v5 05/29] graph: implement internal graph operation helpers jerinj
2020-04-11 14:14         ` [dpdk-dev] [PATCH v5 06/29] graph: populate fastpath memory for graph reel jerinj
2020-04-11 14:14         ` [dpdk-dev] [PATCH v5 07/29] graph: implement create and destroy APIs jerinj
2020-04-11 14:14         ` [dpdk-dev] [PATCH v5 08/29] graph: implement graph operation APIs jerinj
2020-04-11 14:14         ` [dpdk-dev] [PATCH v5 09/29] graph: implement Graphviz export jerinj
2020-04-11 14:14         ` [dpdk-dev] [PATCH v5 10/29] graph: implement debug routines jerinj
2020-04-11 14:14         ` [dpdk-dev] [PATCH v5 11/29] graph: implement stats support jerinj
2020-04-11 14:14         ` [dpdk-dev] [PATCH v5 12/29] graph: implement fastpath API routines jerinj
2020-04-11 14:14         ` [dpdk-dev] [PATCH v5 13/29] graph: add unit test case jerinj
2020-04-11 14:14         ` [dpdk-dev] [PATCH v5 14/29] graph: add performance testcase jerinj
2020-04-11 14:14         ` [dpdk-dev] [PATCH v5 15/29] node: add log infra and null node jerinj
2020-04-11 14:14         ` [dpdk-dev] [PATCH v5 16/29] node: add ethdev Rx node jerinj
2020-04-11 14:14         ` [dpdk-dev] [PATCH v5 17/29] node: add ethdev Tx node jerinj
2020-04-11 14:14         ` [dpdk-dev] [PATCH v5 18/29] node: add ethdev Rx and Tx node ctrl API jerinj
2020-04-11 14:14         ` [dpdk-dev] [PATCH v5 19/29] node: add generic ipv4 lookup node jerinj
2020-04-11 14:14         ` [dpdk-dev] [PATCH v5 20/29] node: ipv4 lookup for arm64 jerinj
2020-05-12  9:31           ` David Marchand
2020-05-12  9:50             ` [dpdk-dev] [EXT] " Nithin Dabilpuram
2020-04-11 14:14         ` [dpdk-dev] [PATCH v5 21/29] node: ipv4 lookup for x86 jerinj
2020-04-11 14:14         ` [dpdk-dev] [PATCH v5 22/29] node: add ipv4 rewrite node jerinj
2020-04-11 14:14         ` [dpdk-dev] [PATCH v5 23/29] node: add ipv4 rewrite and lookup ctrl API jerinj
2020-04-11 14:14         ` [dpdk-dev] [PATCH v5 24/29] node: add packet drop node jerinj
2020-04-11 14:14         ` [dpdk-dev] [PATCH v5 25/29] l3fwd-graph: add graph based l3fwd skeleton jerinj
2020-04-11 14:14         ` [dpdk-dev] [PATCH v5 26/29] l3fwd-graph: add ethdev configuration changes jerinj
2020-04-11 14:14         ` [dpdk-dev] [PATCH v5 27/29] l3fwd-graph: add graph config and main loop jerinj
2020-04-11 14:14         ` [dpdk-dev] [PATCH v5 28/29] doc: add graph library programmer's guide guide jerinj
2020-05-11  9:27           ` David Marchand
2020-05-11  9:30             ` Jerin Jacob
2020-04-11 14:14         ` [dpdk-dev] [PATCH v5 29/29] doc: add l3fwd graph application user guide jerinj
2020-04-30  8:07         ` [dpdk-dev] [PATCH v5 00/29] graph: introduce graph subsystem Tom Barbette
2020-04-30  8:42           ` Jerin Jacob
2020-05-05 21:44         ` Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=8b4a122f-9d59-ddb3-8187-63f1e57e3d25@semihalf.com \
    --to=amo@semihalf.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK-dev Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/dpdk-dev/0 dpdk-dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dpdk-dev dpdk-dev/ https://lore.kernel.org/dpdk-dev \
		dev@dpdk.org
	public-inbox-index dpdk-dev

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git