DPDK-dev Archive on lore.kernel.org
 help / color / Atom feed
From: "Wiles, Keith" <keith.wiles@intel.com>
To: Frank Li <frank.li.65@gmail.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH] pktgen: Fix IPv6 addressing for set/sequence/save commands, packet headers, UI printing
Date: Mon, 25 Nov 2019 21:55:33 +0000
Message-ID: <9EDA5FBC-89BF-4108-9FBF-1A6C91C72CB4@intel.com> (raw)
In-Reply-To: <20191125214638.41094-1-frank.li.65@gmail.com>

> On Nov 25, 2019, at 3:46 PM, Frank Li <frank.li.65@gmail.com> wrote:
> Current IPv6 functionality in pktgen is broken. This fix makes it so that
> IPv6 addresses are properly set when using the set, sequence, and save
> commands and that the IP header and UDP/TCP psuedo-header IPV6 addresses
> are properly set.
> To preserve the runtime commands, the `_atoip` function no longer takes
> in flags to specify converting IPv4/6 addresses, and will try both,
> returning, 4, 6, or -1 for a valid IPv4/6, invalid address, respectively.
> Also print IPv6 addresses in UI properly.
> Co-authored-by Valentin Andrei <vandrei@fb.com>
> Signed-off-by: Frank Li <frank.li.65@gmail.com>

Thanks I will try to find time to pull this into the next release.


  reply index

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-25 21:46 Frank Li
2019-11-25 21:55 ` Wiles, Keith [this message]
  -- strict thread matches above, loose matches on Subject: below --
2019-11-19 23:42 [dpdk-dev] [PATCH] [pktgen] " Frank Li

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=9EDA5FBC-89BF-4108-9FBF-1A6C91C72CB4@intel.com \
    --to=keith.wiles@intel.com \
    --cc=dev@dpdk.org \
    --cc=frank.li.65@gmail.com \


* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK-dev Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/dpdk-dev/0 dpdk-dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dpdk-dev dpdk-dev/ https://lore.kernel.org/dpdk-dev \
	public-inbox-index dpdk-dev

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone https://public-inbox.org/public-inbox.git