DPDK-dev Archive on lore.kernel.org
 help / color / Atom feed
From: "Zhang, Xiao" <xiao.zhang@intel.com>
To: "Wang, Haiyue" <haiyue.wang@intel.com>, "dev@dpdk.org" <dev@dpdk.org>
Cc: "Xing, Beilei" <beilei.xing@intel.com>,
	"Zhang, Qi Z" <qi.z.zhang@intel.com>
Subject: Re: [dpdk-dev] [DPDK] net/i40e: fix SFP X722 not work with FW4.16
Date: Thu, 18 Jul 2019 08:32:30 +0000
Message-ID: <AF0377F445CB2540BB46FF359C1C1BBE0116F49C@SHSMSX105.ccr.corp.intel.com> (raw)
In-Reply-To: <E3B9F2FDCB65864C82CD632F23D8AB877339BF12@SHSMSX101.ccr.corp.intel.com>



> -----Original Message-----
> From: Wang, Haiyue
> Sent: Thursday, July 18, 2019 4:26 PM
> To: Zhang, Xiao <xiao.zhang@intel.com>; dev@dpdk.org
> Cc: Xing, Beilei <beilei.xing@intel.com>; Zhang, Qi Z <qi.z.zhang@intel.com>
> Subject: RE: [DPDK] net/i40e: fix SFP X722 not work with FW4.16
> 
> 
> 
> BR,
> Haiyue
> 
> 
> > -----Original Message-----
> > From: Wang, Haiyue
> > Sent: Thursday, July 18, 2019 16:23
> > To: Zhang, Xiao <xiao.zhang@intel.com>; dev@dpdk.org
> > Cc: Xing, Beilei <beilei.xing@intel.com>; Zhang, Qi Z
> > <qi.z.zhang@intel.com>
> > Subject: RE: [DPDK] net/i40e: fix SFP X722 not work with FW4.16
> >
> > > -----Original Message-----
> > > From: Zhang, Xiao
> > > Sent: Friday, July 19, 2019 01:14
> > > To: dev@dpdk.org
> > > Cc: Xing, Beilei <beilei.xing@intel.com>; Wang, Haiyue
> > > <haiyue.wang@intel.com>; Zhang, Qi Z <qi.z.zhang@intel.com>; Zhang,
> > > Xiao <xiao.zhang@intel.com>
> > > Subject: [DPDK] net/i40e: fix SFP X722 not work with FW4.16
> > >
> > > FW4.16 of SFP X722 does not support setting TPID by
> > > set_switch_config adminq operation, for firmware version less than
> > > 4.16 TPID is set by register instead. Follow the same path with new
> > > firmware version for SFP X722 to make it work.
> > >
> > > Signed-off-by: Xiao Zhang <xiao.zhang@intel.com>
> > > ---
> > >  drivers/net/i40e/i40e_ethdev.c | 4 +++-
> > >  1 file changed, 3 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/net/i40e/i40e_ethdev.c
> > > b/drivers/net/i40e/i40e_ethdev.c index 2b9fc45..bf6dc2b 100644
> > > --- a/drivers/net/i40e/i40e_ethdev.c
> > > +++ b/drivers/net/i40e/i40e_ethdev.c
> > > @@ -3708,7 +3708,9 @@ i40e_vlan_tpid_set(struct rte_eth_dev *dev,
> > >  	}
> > >
> > >  	/* 802.1ad frames ability is added in NVM API 1.7*/
> > > -	if (hw->flags & I40E_HW_FLAG_802_1AD_CAPABLE) {
> > > +	/* FW4.16 for SFP x722 does not support set_switch_config option */
> > > +	if ((hw->flags & I40E_HW_FLAG_802_1AD_CAPABLE) &&
> > > +		hw->device_id != I40E_DEV_ID_SFP_X722) {
> > >  		if (qinq) {
> > >  			if (vlan_type == ETH_VLAN_TYPE_OUTER)
> > >  				hw->first_tag = rte_cpu_to_le_16(tpid);
> >
> > Control the ' I40E_HW_FLAG_802_1AD_CAPABLE ' set or not here is better ?
> >
> > enum i40e_status_code i40e_init_adminq(struct i40e_hw *hw)
> >
> > 	/* The ability to RX (not drop) 802.1ad frames was added in API 1.7 */
> > 	if ((hw->aq.api_maj_ver > 1) ||
> > 	    ((hw->aq.api_maj_ver == 1) &&
> > 	     (hw->aq.api_min_ver >= 7)))
> > 		hw->flags |= I40E_HW_FLAG_802_1AD_CAPABLE;
> >
> Looks like changing the share code. Or like :
> 
> 	ret = i40e_init_adminq(hw);
> 	if (ret != I40E_SUCCESS) {
> 		PMD_INIT_LOG(ERR, "Failed to init adminq: %d", ret);
> 		return -EIO;
> 	}
> 	...
> 	clear I40E_HW_FLAG_802_1AD_CAPABLE here ...

Yes, it's better to clear this flag in case it will be used in other place.

> > > --
> > > 2.7.4


  reply index

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-18 17:13 Xiao Zhang
2019-07-18  8:23 ` Wang, Haiyue
2019-07-18  8:25 ` Wang, Haiyue
2019-07-18  8:32   ` Zhang, Xiao [this message]
2019-07-18 22:51 ` [dpdk-dev] [v2] " Xiao Zhang
2019-07-19  0:56   ` Zhang, Qi Z
2019-07-19  1:02     ` Wang, Haiyue
2019-07-19  1:14       ` Zhang, Xiao
2019-07-19 10:26   ` [dpdk-dev] [v3] " Xiao Zhang
2019-07-19 10:59     ` [dpdk-dev] [v4] " Xiao Zhang
2019-07-19  2:17       ` Wang, Haiyue
2019-07-19  5:26         ` Zhang, Qi Z
2019-07-19 15:30       ` Stillwell Jr, Paul M
2019-07-19 18:17         ` [dpdk-dev] [dpdk-stable] " Ferruh Yigit
2019-07-20  0:53           ` Zhang, Xiao

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=AF0377F445CB2540BB46FF359C1C1BBE0116F49C@SHSMSX105.ccr.corp.intel.com \
    --to=xiao.zhang@intel.com \
    --cc=beilei.xing@intel.com \
    --cc=dev@dpdk.org \
    --cc=haiyue.wang@intel.com \
    --cc=qi.z.zhang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK-dev Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/dpdk-dev/0 dpdk-dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dpdk-dev dpdk-dev/ https://lore.kernel.org/dpdk-dev \
		dev@dpdk.org
	public-inbox-index dpdk-dev

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git