DPDK-dev Archive on lore.kernel.org
 help / color / Atom feed
From: Slava Ovsiienko <viacheslavo@mellanox.com>
To: Dekel Peled <dekelp@mellanox.com>,
	Adrien Mazarguil <adrien.mazarguil@6wind.com>,
	"wenzhuo.lu@intel.com" <wenzhuo.lu@intel.com>,
	"jingjing.wu@intel.com" <jingjing.wu@intel.com>,
	"bernard.iremonger@intel.com" <bernard.iremonger@intel.com>,
	Yongseok Koh <yskoh@mellanox.com>,
	Shahaf Shuler <shahafs@mellanox.com>,
	"arybchenko@solarflare.com" <arybchenko@solarflare.com>,
	Raslan Darawsheh <rasland@mellanox.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>, Ori Kam <orika@mellanox.com>
Subject: Re: [dpdk-dev] [PATCH v10 3/3] net/mlx5: update modify header using Direct Verbs
Date: Wed, 3 Jul 2019 06:30:29 +0000
Message-ID: <AM4PR05MB3265EE3513299E571521777AD2FB0@AM4PR05MB3265.eurprd05.prod.outlook.com> (raw)
In-Reply-To: <a6bde8a76159d5fcfcfe8839fd9225509551dc5a.1562078184.git.dekelp@mellanox.com>

> -----Original Message-----
> From: Dekel Peled <dekelp@mellanox.com>
> Sent: Tuesday, July 2, 2019 17:44
> To: Adrien Mazarguil <adrien.mazarguil@6wind.com>;
> wenzhuo.lu@intel.com; jingjing.wu@intel.com;
> bernard.iremonger@intel.com; Yongseok Koh <yskoh@mellanox.com>;
> Shahaf Shuler <shahafs@mellanox.com>; Slava Ovsiienko
> <viacheslavo@mellanox.com>; arybchenko@solarflare.com
> Cc: dev@dpdk.org; Ori Kam <orika@mellanox.com>
> Subject: [PATCH v10 3/3] net/mlx5: update modify header using Direct Verbs
> 
> This patch implements additional actions of packet header
> modifications.
> 
> Add actions:
> - INC_TCP_SEQ - Increase sequence number in the outermost TCP header.
> - DEC_TCP_SEQ - Decrease sequence number in the outermost TCP header.
> - INC_TCP_ACK - Increase acknowledgment number in the outermost TCP
> 		header.
> - DEC_TCP_ACK - Decrease acknowledgment number in the outermost TCP
> 		header.
> 
> Original work by Xiaoyu Min.
> 
> Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>

> ---
>  doc/guides/rel_notes/release_19_08.rst |   7 +
>  drivers/net/mlx5/mlx5_flow.h           |  10 +-
>  drivers/net/mlx5/mlx5_flow_dv.c        | 237
> +++++++++++++++++++++++++++++++++
>  drivers/net/mlx5/mlx5_prm.h            |  12 ++
>  4 files changed, 265 insertions(+), 1 deletion(-)
> 
> diff --git a/doc/guides/rel_notes/release_19_08.rst
> b/doc/guides/rel_notes/release_19_08.rst
> index 3da2667..450d22f 100644
> --- a/doc/guides/rel_notes/release_19_08.rst
> +++ b/doc/guides/rel_notes/release_19_08.rst
> @@ -74,6 +74,13 @@ New Features
> 
>    * Enabled Tx outer/inner L3/L4 checksum offload.
> 
> +* **Updated Mellanox mlx5 driver.**
> +
> +  Updated Mellanox mlx5 driver with new features and improvements,
> including:
> +
> +  * Updated the packet header modification feature. Added support of TCP
> header
> +    sequence number and acknowledgment number modification.
> +
>  * **Updated Solarflare network PMD.**
> 
>    Updated the Solarflare ``sfc_efx`` driver with changes including:
> diff --git a/drivers/net/mlx5/mlx5_flow.h b/drivers/net/mlx5/mlx5_flow.h
> index b665420..dc4a56a 100644
> --- a/drivers/net/mlx5/mlx5_flow.h
> +++ b/drivers/net/mlx5/mlx5_flow.h
> @@ -114,6 +114,10 @@
>  #define MLX5_FLOW_ACTION_NVGRE_DECAP (1u << 25)
>  #define MLX5_FLOW_ACTION_RAW_ENCAP (1u << 26)
>  #define MLX5_FLOW_ACTION_RAW_DECAP (1u << 27)
> +#define MLX5_FLOW_ACTION_INC_TCP_SEQ (1u << 28)
> +#define MLX5_FLOW_ACTION_DEC_TCP_SEQ (1u << 29)
> +#define MLX5_FLOW_ACTION_INC_TCP_ACK (1u << 30)
> +#define MLX5_FLOW_ACTION_DEC_TCP_ACK (1u << 31)
> 
>  #define MLX5_FLOW_FATE_ACTIONS \
>  	(MLX5_FLOW_ACTION_DROP | MLX5_FLOW_ACTION_QUEUE | \
> @@ -140,7 +144,11 @@
>  				      MLX5_FLOW_ACTION_SET_TTL | \
>  				      MLX5_FLOW_ACTION_DEC_TTL | \
>  				      MLX5_FLOW_ACTION_SET_MAC_SRC | \
> -				      MLX5_FLOW_ACTION_SET_MAC_DST)
> +				      MLX5_FLOW_ACTION_SET_MAC_DST | \
> +				      MLX5_FLOW_ACTION_INC_TCP_SEQ | \
> +				      MLX5_FLOW_ACTION_DEC_TCP_SEQ | \
> +				      MLX5_FLOW_ACTION_INC_TCP_ACK | \
> +				      MLX5_FLOW_ACTION_DEC_TCP_ACK)
> 
>  #ifndef IPPROTO_MPLS
>  #define IPPROTO_MPLS 137
> diff --git a/drivers/net/mlx5/mlx5_flow_dv.c
> b/drivers/net/mlx5/mlx5_flow_dv.c
> index 933ad0b..8f64182 100644
> --- a/drivers/net/mlx5/mlx5_flow_dv.c
> +++ b/drivers/net/mlx5/mlx5_flow_dv.c
> @@ -136,6 +136,8 @@ struct field_modify_info modify_udp[] = {
>  struct field_modify_info modify_tcp[] = {
>  	{2, 0, MLX5_MODI_OUT_TCP_SPORT},
>  	{2, 2, MLX5_MODI_OUT_TCP_DPORT},
> +	{4, 4, MLX5_MODI_OUT_TCP_SEQ_NUM},
> +	{4, 8, MLX5_MODI_OUT_TCP_ACK_NUM},
>  	{0, 0, 0},
>  };
> 
> @@ -561,6 +563,96 @@ struct field_modify_info modify_tcp[] = {
>  }
> 
>  /**
> + * Convert modify-header increment/decrement TCP Sequence number
> + * to DV specification.
> + *
> + * @param[in,out] resource
> + *   Pointer to the modify-header resource.
> + * @param[in] action
> + *   Pointer to action specification.
> + * @param[out] error
> + *   Pointer to the error structure.
> + *
> + * @return
> + *   0 on success, a negative errno value otherwise and rte_errno is set.
> + */
> +static int
> +flow_dv_convert_action_modify_tcp_seq
> +			(struct mlx5_flow_dv_modify_hdr_resource
> *resource,
> +			 const struct rte_flow_action *action,
> +			 struct rte_flow_error *error)
> +{
> +	const rte_be32_t *conf = (const rte_be32_t *)(action->conf);
> +	uint64_t value = rte_be_to_cpu_32(*conf);
> +	struct rte_flow_item item;
> +	struct rte_flow_item_tcp tcp;
> +	struct rte_flow_item_tcp tcp_mask;
> +
> +	memset(&tcp, 0, sizeof(tcp));
> +	memset(&tcp_mask, 0, sizeof(tcp_mask));
> +	if (action->type == RTE_FLOW_ACTION_TYPE_DEC_TCP_SEQ)
> +		/*
> +		 * The HW has no decrement operation, only increment
> operation.
> +		 * To simulate decrement X from Y using increment operation
> +		 * we need to add UINT32_MAX X times to Y.
> +		 * Each adding of UINT32_MAX decrements Y by 1.
> +		 */
> +		value *= UINT32_MAX;
> +	tcp.hdr.sent_seq = rte_cpu_to_be_32((uint32_t)value);
> +	tcp_mask.hdr.sent_seq = RTE_BE32(UINT32_MAX);
> +	item.type = RTE_FLOW_ITEM_TYPE_TCP;
> +	item.spec = &tcp;
> +	item.mask = &tcp_mask;
> +	return flow_dv_convert_modify_action(&item, modify_tcp,
> resource,
> +
> MLX5_MODIFICATION_TYPE_ADD, error);
> +}
> +
> +/**
> + * Convert modify-header increment/decrement TCP Acknowledgment
> number
> + * to DV specification.
> + *
> + * @param[in,out] resource
> + *   Pointer to the modify-header resource.
> + * @param[in] action
> + *   Pointer to action specification.
> + * @param[out] error
> + *   Pointer to the error structure.
> + *
> + * @return
> + *   0 on success, a negative errno value otherwise and rte_errno is set.
> + */
> +static int
> +flow_dv_convert_action_modify_tcp_ack
> +			(struct mlx5_flow_dv_modify_hdr_resource
> *resource,
> +			 const struct rte_flow_action *action,
> +			 struct rte_flow_error *error)
> +{
> +	const rte_be32_t *conf = (const rte_be32_t *)(action->conf);
> +	uint64_t value = rte_be_to_cpu_32(*conf);
> +	struct rte_flow_item item;
> +	struct rte_flow_item_tcp tcp;
> +	struct rte_flow_item_tcp tcp_mask;
> +
> +	memset(&tcp, 0, sizeof(tcp));
> +	memset(&tcp_mask, 0, sizeof(tcp_mask));
> +	if (action->type == RTE_FLOW_ACTION_TYPE_DEC_TCP_ACK)
> +		/*
> +		 * The HW has no decrement operation, only increment
> operation.
> +		 * To simulate decrement X from Y using increment operation
> +		 * we need to add UINT32_MAX X times to Y.
> +		 * Each adding of UINT32_MAX decrements Y by 1.
> +		 */
> +		value *= UINT32_MAX;
> +	tcp.hdr.recv_ack = rte_cpu_to_be_32((uint32_t)value);
> +	tcp_mask.hdr.recv_ack = RTE_BE32(UINT32_MAX);
> +	item.type = RTE_FLOW_ITEM_TYPE_TCP;
> +	item.spec = &tcp;
> +	item.mask = &tcp_mask;
> +	return flow_dv_convert_modify_action(&item, modify_tcp,
> resource,
> +
> MLX5_MODIFICATION_TYPE_ADD, error);
> +}
> +
> +/**
>   * Validate META item.
>   *
>   * @param[in] dev
> @@ -1668,6 +1760,96 @@ struct field_modify_info modify_tcp[] = {
>  }
> 
>  /**
> + * Validate the modify-header actions of increment/decrement
> + * TCP Sequence-number.
> + *
> + * @param[in] action_flags
> + *   Holds the actions detected until now.
> + * @param[in] action
> + *   Pointer to the modify action.
> + * @param[in] item_flags
> + *   Holds the items detected.
> + * @param[out] error
> + *   Pointer to error structure.
> + *
> + * @return
> + *   0 on success, a negative errno value otherwise and rte_errno is set.
> + */
> +static int
> +flow_dv_validate_action_modify_tcp_seq(const uint64_t action_flags,
> +				       const struct rte_flow_action *action,
> +				       const uint64_t item_flags,
> +				       struct rte_flow_error *error)
> +{
> +	int ret = 0;
> +
> +	ret = flow_dv_validate_action_modify_hdr(action_flags, action,
> error);
> +	if (!ret) {
> +		if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L4_TCP))
> +			return rte_flow_error_set(error, EINVAL,
> +
> RTE_FLOW_ERROR_TYPE_ACTION,
> +						  NULL, "no TCP item in"
> +						  " pattern");
> +		if ((action->type == RTE_FLOW_ACTION_TYPE_INC_TCP_SEQ
> &&
> +			(action_flags &
> MLX5_FLOW_ACTION_DEC_TCP_SEQ)) ||
> +		    (action->type == RTE_FLOW_ACTION_TYPE_DEC_TCP_SEQ
> &&
> +			(action_flags &
> MLX5_FLOW_ACTION_INC_TCP_SEQ)))
> +			return rte_flow_error_set(error, EINVAL,
> +
> RTE_FLOW_ERROR_TYPE_ACTION,
> +						  NULL,
> +						  "cannot decrease and
> increase"
> +						  " TCP sequence number"
> +						  " at the same time");
> +	}
> +	return ret;
> +}
> +
> +/**
> + * Validate the modify-header actions of increment/decrement
> + * TCP Acknowledgment number.
> + *
> + * @param[in] action_flags
> + *   Holds the actions detected until now.
> + * @param[in] action
> + *   Pointer to the modify action.
> + * @param[in] item_flags
> + *   Holds the items detected.
> + * @param[out] error
> + *   Pointer to error structure.
> + *
> + * @return
> + *   0 on success, a negative errno value otherwise and rte_errno is set.
> + */
> +static int
> +flow_dv_validate_action_modify_tcp_ack(const uint64_t action_flags,
> +				       const struct rte_flow_action *action,
> +				       const uint64_t item_flags,
> +				       struct rte_flow_error *error)
> +{
> +	int ret = 0;
> +
> +	ret = flow_dv_validate_action_modify_hdr(action_flags, action,
> error);
> +	if (!ret) {
> +		if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L4_TCP))
> +			return rte_flow_error_set(error, EINVAL,
> +
> RTE_FLOW_ERROR_TYPE_ACTION,
> +						  NULL, "no TCP item in"
> +						  " pattern");
> +		if ((action->type == RTE_FLOW_ACTION_TYPE_INC_TCP_ACK
> &&
> +			(action_flags &
> MLX5_FLOW_ACTION_DEC_TCP_ACK)) ||
> +		    (action->type == RTE_FLOW_ACTION_TYPE_DEC_TCP_ACK
> &&
> +			(action_flags &
> MLX5_FLOW_ACTION_INC_TCP_ACK)))
> +			return rte_flow_error_set(error, EINVAL,
> +
> RTE_FLOW_ERROR_TYPE_ACTION,
> +						  NULL,
> +						  "cannot decrease and
> increase"
> +						  " TCP acknowledgment
> number"
> +						  " at the same time");
> +	}
> +	return ret;
> +}
> +
> +/**
>   * Validate the modify-header TTL actions.
>   *
>   * @param[in] action_flags
> @@ -2416,6 +2598,40 @@ struct field_modify_info modify_tcp[] = {
>  			++actions_n;
>  			action_flags |= MLX5_FLOW_ACTION_JUMP;
>  			break;
> +		case RTE_FLOW_ACTION_TYPE_INC_TCP_SEQ:
> +		case RTE_FLOW_ACTION_TYPE_DEC_TCP_SEQ:
> +			ret = flow_dv_validate_action_modify_tcp_seq
> +
> 	(action_flags,
> +								 actions,
> +								 item_flags,
> +								 error);
> +			if (ret < 0)
> +				return ret;
> +			/* Count all modify-header actions as one action. */
> +			if (!(action_flags &
> MLX5_FLOW_MODIFY_HDR_ACTIONS))
> +				++actions_n;
> +			action_flags |= actions->type ==
> +
> 	RTE_FLOW_ACTION_TYPE_INC_TCP_SEQ ?
> +
> 	MLX5_FLOW_ACTION_INC_TCP_SEQ :
> +
> 	MLX5_FLOW_ACTION_DEC_TCP_SEQ;
> +			break;
> +		case RTE_FLOW_ACTION_TYPE_INC_TCP_ACK:
> +		case RTE_FLOW_ACTION_TYPE_DEC_TCP_ACK:
> +			ret = flow_dv_validate_action_modify_tcp_ack
> +
> 	(action_flags,
> +								 actions,
> +								 item_flags,
> +								 error);
> +			if (ret < 0)
> +				return ret;
> +			/* Count all modify-header actions as one action. */
> +			if (!(action_flags &
> MLX5_FLOW_MODIFY_HDR_ACTIONS))
> +				++actions_n;
> +			action_flags |= actions->type ==
> +
> 	RTE_FLOW_ACTION_TYPE_INC_TCP_ACK ?
> +
> 	MLX5_FLOW_ACTION_INC_TCP_ACK :
> +
> 	MLX5_FLOW_ACTION_DEC_TCP_ACK;
> +			break;
>  		default:
>  			return rte_flow_error_set(error, ENOTSUP,
> 
> RTE_FLOW_ERROR_TYPE_ACTION,
> @@ -3895,6 +4111,27 @@ struct field_modify_info modify_tcp[] = {
>  				return -rte_errno;
>  			action_flags |= MLX5_FLOW_ACTION_SET_TTL;
>  			break;
> +		case RTE_FLOW_ACTION_TYPE_INC_TCP_SEQ:
> +		case RTE_FLOW_ACTION_TYPE_DEC_TCP_SEQ:
> +			if (flow_dv_convert_action_modify_tcp_seq(&res,
> actions,
> +								  error))
> +				return -rte_errno;
> +			action_flags |= actions->type ==
> +
> 	RTE_FLOW_ACTION_TYPE_INC_TCP_SEQ ?
> +					MLX5_FLOW_ACTION_INC_TCP_SEQ
> :
> +
> 	MLX5_FLOW_ACTION_DEC_TCP_SEQ;
> +			break;
> +
> +		case RTE_FLOW_ACTION_TYPE_INC_TCP_ACK:
> +		case RTE_FLOW_ACTION_TYPE_DEC_TCP_ACK:
> +			if (flow_dv_convert_action_modify_tcp_ack(&res,
> actions,
> +								  error))
> +				return -rte_errno;
> +			action_flags |= actions->type ==
> +
> 	RTE_FLOW_ACTION_TYPE_INC_TCP_ACK ?
> +					MLX5_FLOW_ACTION_INC_TCP_ACK
> :
> +
> 	MLX5_FLOW_ACTION_DEC_TCP_ACK;
> +			break;
>  		case RTE_FLOW_ACTION_TYPE_END:
>  			actions_end = true;
>  			if (action_flags &
> MLX5_FLOW_MODIFY_HDR_ACTIONS) {
> diff --git a/drivers/net/mlx5/mlx5_prm.h b/drivers/net/mlx5/mlx5_prm.h
> index 1a19958..7482383 100644
> --- a/drivers/net/mlx5/mlx5_prm.h
> +++ b/drivers/net/mlx5/mlx5_prm.h
> @@ -347,6 +347,18 @@ enum mlx5_modification_field {
>  	MLX5_MODI_IN_IPV6_HOPLIMIT,
>  	MLX5_MODI_META_DATA_REG_A,
>  	MLX5_MODI_META_DATA_REG_B = 0x50,
> +	MLX5_MODI_META_REG_C_0,
> +	MLX5_MODI_META_REG_C_1,
> +	MLX5_MODI_META_REG_C_2,
> +	MLX5_MODI_META_REG_C_3,
> +	MLX5_MODI_META_REG_C_4,
> +	MLX5_MODI_META_REG_C_5,
> +	MLX5_MODI_META_REG_C_6,
> +	MLX5_MODI_META_REG_C_7,
> +	MLX5_MODI_OUT_TCP_SEQ_NUM,
> +	MLX5_MODI_IN_TCP_SEQ_NUM,
> +	MLX5_MODI_OUT_TCP_ACK_NUM,
> +	MLX5_MODI_IN_TCP_ACK_NUM = 0x5C,
>  };
> 
>  /* Modification sub command. */
> --
> 1.8.3.1


  reply index

Thread overview: 76+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-21 14:18 [PATCH 0/3] add actions to modify header fields Dekel Peled
2019-03-21 14:18 ` [PATCH 1/3] ethdev: add actions to modify TCP " Dekel Peled
2019-03-26  9:24   ` Dekel Peled
2019-03-29 13:58   ` Adrien Mazarguil
2019-03-31 13:09     ` Dekel Peled
2019-03-21 14:18 ` [PATCH 2/3] app/testpmd: " Dekel Peled
2019-03-29 13:58   ` Adrien Mazarguil
2019-03-31 13:10     ` Dekel Peled
2019-03-21 14:18 ` [PATCH 3/3] net/mlx5: update modify header using Direct Verbs Dekel Peled
2019-04-02 15:13 ` [PATCH v2 0/3] add actions to modify header fields Dekel Peled
2019-04-10 11:26   ` [dpdk-dev] [PATCH v3 " Dekel Peled
2019-04-10 11:26     ` [dpdk-dev] [PATCH v3 1/3] ethdev: add actions to modify TCP " Dekel Peled
2019-04-10 11:26     ` [dpdk-dev] [PATCH v3 2/3] app/testpmd: " Dekel Peled
2019-04-10 11:26     ` [dpdk-dev] [PATCH v3 3/3] net/mlx5: update modify header using Direct Verbs Dekel Peled
2019-04-10 11:50     ` [dpdk-dev] [PATCH v4 0/3] add actions to modify header fields Dekel Peled
2019-04-10 11:50       ` [dpdk-dev] [PATCH v4 1/3] ethdev: add actions to modify TCP " Dekel Peled
2019-04-18 12:30         ` Adrien Mazarguil
2019-04-22  7:15           ` Dekel Peled
2019-04-10 11:50       ` [dpdk-dev] [PATCH v4 2/3] app/testpmd: " Dekel Peled
2019-04-10 11:50       ` [dpdk-dev] [PATCH v4 3/3] net/mlx5: update modify header using Direct Verbs Dekel Peled
2019-04-22 11:22       ` [dpdk-dev] [PATCH v5 0/3] add actions to modify header fields Dekel Peled
2019-04-22 11:22         ` [dpdk-dev] [PATCH v5 1/3] ethdev: add actions to modify TCP " Dekel Peled
2019-04-22 11:22         ` [dpdk-dev] [PATCH v5 2/3] app/testpmd: " Dekel Peled
2019-04-22 11:22         ` [dpdk-dev] [PATCH v5 3/3] net/mlx5: update modify header using Direct Verbs Dekel Peled
2019-06-02  8:18         ` [dpdk-dev] [PATCH v5 0/3] add actions to modify header fields Dekel Peled
2019-06-04  5:13           ` Dekel Peled
2019-06-04  8:14             ` Dekel Peled
2019-06-17  6:12         ` [dpdk-dev] [PATCH v6 " Dekel Peled
2019-06-17  6:12           ` [dpdk-dev] [PATCH v6 1/3] ethdev: add actions to modify TCP " Dekel Peled
2019-06-17  6:12           ` [dpdk-dev] [PATCH v6 2/3] app/testpmd: " Dekel Peled
2019-06-17  6:12           ` [dpdk-dev] [PATCH v6 3/3] net/mlx5: update modify header using Direct Verbs Dekel Peled
2019-06-27 17:39           ` [dpdk-dev] [PATCH v7 0/3] add actions to modify header fields Dekel Peled
2019-06-30  7:59             ` [dpdk-dev] [PATCH v8 " Dekel Peled
2019-06-30  7:59               ` [dpdk-dev] [PATCH v8 1/3] ethdev: add actions to modify TCP " Dekel Peled
2019-07-01  8:55                 ` Adrien Mazarguil
2019-07-01  9:58                   ` Dekel Peled
2019-06-30  7:59               ` [dpdk-dev] [PATCH v8 2/3] app/testpmd: " Dekel Peled
2019-06-30  7:59               ` [dpdk-dev] [PATCH v8 3/3] net/mlx5: update modify header using Direct Verbs Dekel Peled
     [not found]           ` <cover.1561656977.git.dekelp@mellanox.com>
2019-06-27 17:39             ` [dpdk-dev] [PATCH v7 1/3] ethdev: add actions to modify TCP header fields Dekel Peled
2019-06-27 17:54               ` Andrew Rybchenko
2019-06-28 16:18                 ` Adrien Mazarguil
2019-06-27 17:39             ` [dpdk-dev] [PATCH v7 2/3] app/testpmd: " Dekel Peled
2019-06-27 17:39             ` [dpdk-dev] [PATCH v7 3/3] net/mlx5: update modify header using Direct Verbs Dekel Peled
2019-04-02 15:13 ` [PATCH v2 1/3] ethdev: add actions to modify TCP header fields Dekel Peled
2019-04-02 16:33   ` Ori Kam
2019-04-03  9:14   ` Adrien Mazarguil
2019-04-03 10:49     ` Dekel Peled
2019-04-03 12:49       ` Adrien Mazarguil
2019-04-04  9:01         ` Ori Kam
2019-04-04 13:25           ` Adrien Mazarguil
2019-04-05 11:54             ` [dpdk-dev] " Andrew Rybchenko
2019-04-08 13:36             ` Dekel Peled
2019-04-08 13:53               ` Andrew Rybchenko
2019-04-08 14:21                 ` Adrien Mazarguil
2019-04-02 15:13 ` [PATCH v2 2/3] app/testpmd: " Dekel Peled
2019-04-02 16:33   ` Ori Kam
2019-04-02 15:13 ` [PATCH v2 3/3] net/mlx5: update modify header using Direct Verbs Dekel Peled
2019-04-02 16:34   ` Ori Kam
2019-04-03  8:27   ` Shahaf Shuler
2019-07-01 15:43 ` [dpdk-dev] [PATCH v9 0/3] add actions to modify header fields Dekel Peled
2019-07-01 15:43   ` [dpdk-dev] [PATCH v9 1/3] ethdev: add actions to modify TCP " Dekel Peled
2019-07-02  8:14     ` Andrew Rybchenko
2019-07-02  9:52       ` Dekel Peled
2019-07-02 10:33         ` Adrien Mazarguil
2019-07-02 12:01           ` Dekel Peled
2019-07-01 15:43   ` [dpdk-dev] [PATCH v9 2/3] app/testpmd: " Dekel Peled
2019-07-01 15:43   ` [dpdk-dev] [PATCH v9 3/3] net/mlx5: update modify header using Direct Verbs Dekel Peled
2019-07-02 14:44 ` [dpdk-dev] [PATCH v10 0/3] add actions to modify header fields Dekel Peled
2019-07-02 14:44   ` [dpdk-dev] [PATCH v10 1/3] ethdev: add actions to modify TCP " Dekel Peled
2019-07-03  5:04     ` Slava Ovsiienko
2019-07-02 14:44   ` [dpdk-dev] [PATCH v10 2/3] app/testpmd: " Dekel Peled
2019-07-03  6:30     ` Slava Ovsiienko
2019-07-02 14:44   ` [dpdk-dev] [PATCH v10 3/3] net/mlx5: update modify header using Direct Verbs Dekel Peled
2019-07-03  6:30     ` Slava Ovsiienko [this message]
2019-07-02 15:15   ` [dpdk-dev] [PATCH v10 0/3] add actions to modify header fields Adrien Mazarguil
2019-07-03 14:59     ` Ferruh Yigit

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=AM4PR05MB3265EE3513299E571521777AD2FB0@AM4PR05MB3265.eurprd05.prod.outlook.com \
    --to=viacheslavo@mellanox.com \
    --cc=adrien.mazarguil@6wind.com \
    --cc=arybchenko@solarflare.com \
    --cc=bernard.iremonger@intel.com \
    --cc=dekelp@mellanox.com \
    --cc=dev@dpdk.org \
    --cc=jingjing.wu@intel.com \
    --cc=orika@mellanox.com \
    --cc=rasland@mellanox.com \
    --cc=shahafs@mellanox.com \
    --cc=wenzhuo.lu@intel.com \
    --cc=yskoh@mellanox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK-dev Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/dpdk-dev/0 dpdk-dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dpdk-dev dpdk-dev/ https://lore.kernel.org/dpdk-dev \
		dev@dpdk.org dpdk-dev@archiver.kernel.org
	public-inbox-index dpdk-dev


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/ public-inbox