DPDK-dev Archive on lore.kernel.org
 help / color / Atom feed
From: Dekel Peled <dekelp@mellanox.com>
To: "Iremonger, Bernard" <bernard.iremonger@intel.com>,
	"Mcnamara, John" <john.mcnamara@intel.com>,
	"Kovacevic, Marko" <marko.kovacevic@intel.com>,
	"nhorman@tuxdriver.com" <nhorman@tuxdriver.com>,
	"ajit.khaparde@broadcom.com" <ajit.khaparde@broadcom.com>,
	"somnath.kotur@broadcom.com" <somnath.kotur@broadcom.com>,
	"Burakov, Anatoly" <anatoly.burakov@intel.com>,
	 "xuanziyang2@huawei.com" <xuanziyang2@huawei.com>,
	"cloud.wangxiaoyun@huawei.com" <cloud.wangxiaoyun@huawei.com>,
	"zhouguoyang@huawei.com" <zhouguoyang@huawei.com>,
	"Lu, Wenzhuo" <wenzhuo.lu@intel.com>,
	"Ananyev, Konstantin" <konstantin.ananyev@intel.com>,
	 Matan Azrad <matan@mellanox.com>,
	Shahaf Shuler <shahafs@mellanox.com>,
	Slava Ovsiienko <viacheslavo@mellanox.com>,
	"rmody@marvell.com" <rmody@marvell.com>,
	"shshaikh@marvell.com" <shshaikh@marvell.com>,
	"maxime.coquelin@redhat.com" <maxime.coquelin@redhat.com>,
	"Bie, Tiwei" <tiwei.bie@intel.com>,
	"Wang, Zhihong" <zhihong.wang@intel.com>,
	"yongwang@vmware.com" <yongwang@vmware.com>,
	Thomas Monjalon <thomas@monjalon.net>,
	"Yigit, Ferruh" <ferruh.yigit@intel.com>,
	"arybchenko@solarflare.com" <arybchenko@solarflare.com>,
	"Wu, Jingjing" <jingjing.wu@intel.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH v2 3/3] app/testpmd: use API to set max LRO packet size
Date: Wed, 6 Nov 2019 13:14:12 +0000
Message-ID: <AM4PR05MB34603048172551A762B34D65B6790@AM4PR05MB3460.eurprd05.prod.outlook.com> (raw)
In-Reply-To: <8CEF83825BEC744B83065625E567D7C260E211E1@IRSMSX108.ger.corp.intel.com>

Thanks, PSB.

> -----Original Message-----
> From: Iremonger, Bernard <bernard.iremonger@intel.com>
> Sent: Wednesday, November 6, 2019 2:36 PM
> To: Dekel Peled <dekelp@mellanox.com>; Mcnamara, John
> <john.mcnamara@intel.com>; Kovacevic, Marko
> <marko.kovacevic@intel.com>; nhorman@tuxdriver.com;
> ajit.khaparde@broadcom.com; somnath.kotur@broadcom.com; Burakov,
> Anatoly <anatoly.burakov@intel.com>; xuanziyang2@huawei.com;
> cloud.wangxiaoyun@huawei.com; zhouguoyang@huawei.com; Lu, Wenzhuo
> <wenzhuo.lu@intel.com>; Ananyev, Konstantin
> <konstantin.ananyev@intel.com>; Matan Azrad <matan@mellanox.com>;
> Shahaf Shuler <shahafs@mellanox.com>; Slava Ovsiienko
> <viacheslavo@mellanox.com>; rmody@marvell.com;
> shshaikh@marvell.com; maxime.coquelin@redhat.com; Bie, Tiwei
> <tiwei.bie@intel.com>; Wang, Zhihong <zhihong.wang@intel.com>;
> yongwang@vmware.com; Thomas Monjalon <thomas@monjalon.net>; Yigit,
> Ferruh <ferruh.yigit@intel.com>; arybchenko@solarflare.com; Wu, Jingjing
> <jingjing.wu@intel.com>
> Cc: dev@dpdk.org
> Subject: RE: [PATCH v2 3/3] app/testpmd: use API to set max LRO packet size
> 
> Hi Dekel,
> 
> > -----Original Message-----
> > From: Dekel Peled <dekelp@mellanox.com>
> > Sent: Wednesday, November 6, 2019 11:35 AM
> > To: Mcnamara, John <john.mcnamara@intel.com>; Kovacevic, Marko
> > <marko.kovacevic@intel.com>; nhorman@tuxdriver.com;
> > ajit.khaparde@broadcom.com; somnath.kotur@broadcom.com; Burakov,
> > Anatoly <anatoly.burakov@intel.com>; xuanziyang2@huawei.com;
> > cloud.wangxiaoyun@huawei.com; zhouguoyang@huawei.com; Lu,
> Wenzhuo
> > <wenzhuo.lu@intel.com>; Ananyev, Konstantin
> > <konstantin.ananyev@intel.com>; matan@mellanox.com;
> > shahafs@mellanox.com; viacheslavo@mellanox.com;
> rmody@marvell.com;
> > shshaikh@marvell.com; maxime.coquelin@redhat.com; Bie, Tiwei
> > <tiwei.bie@intel.com>; Wang, Zhihong <zhihong.wang@intel.com>;
> > yongwang@vmware.com; thomas@monjalon.net; Yigit, Ferruh
> > <ferruh.yigit@intel.com>; arybchenko@solarflare.com; Wu, Jingjing
> > <jingjing.wu@intel.com>; Iremonger, Bernard
> > <bernard.iremonger@intel.com>
> > Cc: dev@dpdk.org
> > Subject: [PATCH v2 3/3] app/testpmd: use API to set max LRO packet
> > size
> >
> > This patch implements use of the API for LRO aggregated packet max size.
> > It adds command-line and runtime commands to configure this value, and
> > adds option to show the supported value.
> > Documentation is updated accordingly.
> >
> > Signed-off-by: Dekel Peled <dekelp@mellanox.com>
> > ---
> >  app/test-pmd/cmdline.c                      | 73
> > +++++++++++++++++++++++++++++
> >  app/test-pmd/config.c                       |  2 +
> >  app/test-pmd/parameters.c                   |  5 ++
> >  app/test-pmd/testpmd.c                      |  1 +
> >  doc/guides/testpmd_app_ug/run_app.rst       |  5 ++
> >  doc/guides/testpmd_app_ug/testpmd_funcs.rst |  9 ++++
> >  6 files changed, 95 insertions(+)
> >
> > diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c index
> > 4478069..edfa60f 100644
> > --- a/app/test-pmd/cmdline.c
> > +++ b/app/test-pmd/cmdline.c
> > @@ -2037,6 +2037,78 @@ struct cmd_config_max_pkt_len_result {
> >  	},
> >  };
> >
> > +/* *** config max LRO aggregated packet size *** */ struct
> > +cmd_config_max_lro_pkt_size_result {
> > +	cmdline_fixed_string_t port;
> > +	cmdline_fixed_string_t keyword;
> > +	cmdline_fixed_string_t all;
> > +	cmdline_fixed_string_t name;
> > +	uint32_t value;
> > +};
> > +
> > +static void
> > +cmd_config_max_lro_pkt_size_parsed(void *parsed_result,
> > +				__attribute__((unused)) struct cmdline *cl,
> > +				__attribute__((unused)) void *data) {
> > +	struct cmd_config_max_lro_pkt_size_result *res = parsed_result;
> > +	portid_t pid;
> > +
> > +	if (!all_ports_stopped()) {
> > +		printf("Please stop all ports first\n");
> > +		return;
> > +	}
> > +
> > +	RTE_ETH_FOREACH_DEV(pid) {
> > +		struct rte_port *port = &ports[pid];
> > +
> > +		if (!strcmp(res->name, "max-lro-pkt-size")) {
> > +			if (res->value ==
> > +					port-
> > >dev_conf.rxmode.max_lro_pkt_size)
> > +				return;
> > +
> 
> Should there be a check on the input value, max is RTE_ETHER_MAX_LEN ?
> 

Max is device specific, can't check it here.

> 
> > +			port->dev_conf.rxmode.max_lro_pkt_size = res-
> > >value;
> > +		} else {
> > +			printf("Unknown parameter\n");
> > +			return;
> > +		}
> > +	}
> > +
> > +	init_port_config();
> > +
> > +	cmd_reconfig_device_queue(RTE_PORT_ALL, 1, 1); }
> > +
> > +cmdline_parse_token_string_t cmd_config_max_lro_pkt_size_port =
> > +	TOKEN_STRING_INITIALIZER(struct
> > cmd_config_max_lro_pkt_size_result,
> > +				 port, "port");
> > +cmdline_parse_token_string_t cmd_config_max_lro_pkt_size_keyword
> =
> > +	TOKEN_STRING_INITIALIZER(struct
> > cmd_config_max_lro_pkt_size_result,
> > +				 keyword, "config");
> > +cmdline_parse_token_string_t cmd_config_max_lro_pkt_size_all =
> > +	TOKEN_STRING_INITIALIZER(struct
> > cmd_config_max_lro_pkt_size_result,
> > +				 all, "all");
> > +cmdline_parse_token_string_t cmd_config_max_lro_pkt_size_name =
> > +	TOKEN_STRING_INITIALIZER(struct
> > cmd_config_max_lro_pkt_size_result,
> > +				 name, "max-lro-pkt-size");
> > +cmdline_parse_token_num_t cmd_config_max_lro_pkt_size_value =
> > +	TOKEN_NUM_INITIALIZER(struct
> > cmd_config_max_lro_pkt_size_result,
> > +			      value, UINT32);
> > +
> > +cmdline_parse_inst_t cmd_config_max_lro_pkt_size = {
> > +	.f = cmd_config_max_lro_pkt_size_parsed,
> > +	.data = NULL,
> > +	.help_str = "port config all max-lro-pkt-size <value>",
> > +	.tokens = {
> > +		(void *)&cmd_config_max_lro_pkt_size_port,
> > +		(void *)&cmd_config_max_lro_pkt_size_keyword,
> > +		(void *)&cmd_config_max_lro_pkt_size_all,
> > +		(void *)&cmd_config_max_lro_pkt_size_name,
> > +		(void *)&cmd_config_max_lro_pkt_size_value,
> > +		NULL,
> > +	},
> > +};
> > +
> >  /* *** configure port MTU *** */
> >  struct cmd_config_mtu_result {
> >  	cmdline_fixed_string_t port;
> > @@ -19024,6 +19096,7 @@ struct
> > cmd_show_port_supported_ptypes_result {
> >  	(cmdline_parse_inst_t *)&cmd_config_rx_tx,
> >  	(cmdline_parse_inst_t *)&cmd_config_mtu,
> >  	(cmdline_parse_inst_t *)&cmd_config_max_pkt_len,
> > +	(cmdline_parse_inst_t *)&cmd_config_max_lro_pkt_size,
> >  	(cmdline_parse_inst_t *)&cmd_config_rx_mode_flag,
> >  	(cmdline_parse_inst_t *)&cmd_config_rss,
> >  	(cmdline_parse_inst_t *)&cmd_config_rxtx_ring_size, diff --git
> > a/app/test-pmd/config.c b/app/test-pmd/config.c index efe2812..50e6ac0
> > 100644
> > --- a/app/test-pmd/config.c
> > +++ b/app/test-pmd/config.c
> > @@ -629,6 +629,8 @@ static int bus_match_all(const struct rte_bus
> > *bus, const void *data)
> >  	printf("Minimum size of RX buffer: %u\n",
> dev_info.min_rx_bufsize);
> >  	printf("Maximum configurable length of RX packet: %u\n",
> >  		dev_info.max_rx_pktlen);
> > +	printf("Maximum configurable size of LRO aggregated packet: %u\n",
> > +		dev_info.max_lro_pkt_size);
> >  	if (dev_info.max_vfs)
> >  		printf("Maximum number of VFs: %u\n", dev_info.max_vfs);
> >  	if (dev_info.max_vmdq_pools)
> > diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
> > index
> > 9ea87c1..3e371e2 100644
> > --- a/app/test-pmd/parameters.c
> > +++ b/app/test-pmd/parameters.c
> > @@ -592,6 +592,7 @@
> >  		{ "mbuf-size",			1, 0, 0 },
> >  		{ "total-num-mbufs",		1, 0, 0 },
> >  		{ "max-pkt-len",		1, 0, 0 },
> > +		{ "max-lro-pkt-size",		1, 0, 0 },
> 
> The max-lro-pkt-size option should be documented in the usage() function
> around line 110 in parameters.c
> 

I'll add in in v3.

> >  		{ "pkt-filter-mode",            1, 0, 0 },
> >  		{ "pkt-filter-report-hash",     1, 0, 0 },
> >  		{ "pkt-filter-size",            1, 0, 0 },
> > @@ -888,6 +889,10 @@
> >  						 "Invalid max-pkt-len=%d -
> > should be > %d\n",
> >  						 n, RTE_ETHER_MIN_LEN);
> >  			}
> > +			if (!strcmp(lgopts[opt_idx].name, "max-lro-pkt-
> > size")) {
> > +				n = atoi(optarg);
> 
> Should there be a check on the value input, max value is
> RTE_ETHER_MAX_LEN?

Max is device specific, can't check it here.

> 
> > +				rx_mode.max_lro_pkt_size = (uint32_t) n;
> > +			}
> >  			if (!strcmp(lgopts[opt_idx].name, "pkt-filter-mode"))
> {
> >  				if (!strcmp(optarg, "signature"))
> >  					fdir_conf.mode =
> > diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c index
> > 38acbc5..d4f67ec 100644
> > --- a/app/test-pmd/testpmd.c
> > +++ b/app/test-pmd/testpmd.c
> > @@ -419,6 +419,7 @@ struct fwd_engine * fwd_engines[] = {  struct
> > rte_eth_rxmode rx_mode = {
> >  	.max_rx_pkt_len = RTE_ETHER_MAX_LEN,
> >  		/**< Default maximum frame length. */
> > +	.max_lro_pkt_size = RTE_ETHER_MAX_LEN,
> >  };
> >
> >  struct rte_eth_txmode tx_mode = {
> > diff --git a/doc/guides/testpmd_app_ug/run_app.rst
> > b/doc/guides/testpmd_app_ug/run_app.rst
> > index ef677ba..bc17f3f 100644
> > --- a/doc/guides/testpmd_app_ug/run_app.rst
> > +++ b/doc/guides/testpmd_app_ug/run_app.rst
> > @@ -112,6 +112,11 @@ The command line options are:
> >
> >      Set the maximum packet size to N bytes, where N >= 64. The
> > default value is 1518.
> >
> > +*   ``--max-lro-pkt-size=N``
> > +
> > +    Set the maximum LRO aggregated packet size to N bytes, where N >=
> 64.
> > +    The default value is 1518.
> 
> Should a max value be specified ?

Max is device specific, can't specify it here.

> 
> > +
> >  *   ``--eth-peers-configfile=name``
> >
> >      Use a configuration file containing the Ethernet addresses of the
> > peer ports.
> > diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> > b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> > index c68a742..0267295 100644
> > --- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> > +++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> > @@ -2139,6 +2139,15 @@ Set the maximum packet length::
> >
> >  This is equivalent to the ``--max-pkt-len`` command-line option.
> >
> > +port config - max-lro-pkt-size
> > +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > +
> > +Set the maximum LRO aggregated packet size::
> > +
> > +   testpmd> port config all max-lro-pkt-size (value)
> > +
> > +This is equivalent to the ``--max-lro-pkt-size`` command-line option.
> > +
> >  port config - Drop Packets
> >  ~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > --
> > 1.8.3.1
> 
> Regards,
> 
> Bernard.


  reply index

Thread overview: 79+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-05  8:40 [dpdk-dev] [PATCH 0/3] support " Dekel Peled
2019-11-05  8:40 ` [dpdk-dev] [PATCH 1/3] ethdev: " Dekel Peled
2019-11-05 12:39   ` Andrew Rybchenko
2019-11-05 13:09     ` Thomas Monjalon
2019-11-05 14:18     ` Dekel Peled
2019-11-05 14:27       ` Andrew Rybchenko
2019-11-05 14:51         ` Dekel Peled
2019-11-05  8:40 ` [dpdk-dev] [PATCH 2/3] net/mlx5: use " Dekel Peled
2019-11-05  8:40 ` [dpdk-dev] [PATCH 3/3] app/testpmd: " Dekel Peled
2019-11-05  9:35 ` [dpdk-dev] [PATCH 0/3] support " Matan Azrad
2019-11-06 11:34 ` [dpdk-dev] [PATCH v2 " Dekel Peled
2019-11-06 11:34   ` [dpdk-dev] [PATCH v2 1/3] ethdev: " Dekel Peled
2019-11-06 12:26     ` Thomas Monjalon
2019-11-06 12:39       ` Dekel Peled
2019-11-06 11:34   ` [dpdk-dev] [PATCH v2 2/3] net/mlx5: use " Dekel Peled
2019-11-06 11:34   ` [dpdk-dev] [PATCH v2 3/3] app/testpmd: " Dekel Peled
2019-11-06 12:35     ` Iremonger, Bernard
2019-11-06 13:14       ` Dekel Peled [this message]
2019-11-06 14:28   ` [dpdk-dev] [PATCH v3 0/3] support " Dekel Peled
2019-11-06 14:28     ` [dpdk-dev] [PATCH v3 1/3] ethdev: " Dekel Peled
2019-11-07 11:57       ` [dpdk-dev] [EXT] " Shahed Shaikh
2019-11-07 12:18         ` Dekel Peled
2019-11-06 14:28     ` [dpdk-dev] [PATCH v3 2/3] net/mlx5: use " Dekel Peled
2019-11-06 14:28     ` [dpdk-dev] [PATCH v3 3/3] app/testpmd: " Dekel Peled
2019-11-06 16:41     ` [dpdk-dev] [PATCH v3 0/3] support " Iremonger, Bernard
2019-11-07  6:10       ` Dekel Peled
2019-11-07 12:35     ` [dpdk-dev] [PATCH v4 " Dekel Peled
2019-11-07 12:35       ` [dpdk-dev] [PATCH v4 1/3] ethdev: " Dekel Peled
2019-11-07 20:15         ` Ferruh Yigit
2019-11-08  6:54           ` Matan Azrad
2019-11-08  9:19             ` Ferruh Yigit
2019-11-08 10:10               ` Matan Azrad
2019-11-08 11:37                 ` Ferruh Yigit
2019-11-08 11:56                   ` Matan Azrad
2019-11-08 12:51                     ` Ferruh Yigit
2019-11-08 16:11                       ` Dekel Peled
2019-11-08 16:53                         ` Ferruh Yigit
2019-11-09 18:20                       ` Matan Azrad
2019-11-10 23:40                         ` Ananyev, Konstantin
2019-11-11  8:01                           ` Matan Azrad
2019-11-12 18:31                             ` Ananyev, Konstantin
2019-11-11 11:15                         ` Ferruh Yigit
2019-11-11 11:33                           ` Matan Azrad
2019-11-11 12:21                             ` Ferruh Yigit
2019-11-11 13:32                               ` Matan Azrad
2019-11-08 13:11                     ` Ananyev, Konstantin
2019-11-08 14:10                       ` Dekel Peled
2019-11-08 14:52                         ` Ananyev, Konstantin
2019-11-08 16:08                           ` Dekel Peled
2019-11-08 16:28                             ` Ananyev, Konstantin
2019-11-09 18:26                               ` Matan Azrad
2019-11-10 22:51                                 ` Ananyev, Konstantin
2019-11-11  6:53                                   ` Matan Azrad
2019-11-07 12:35       ` [dpdk-dev] [PATCH v4 2/3] net/mlx5: use " Dekel Peled
2019-11-08  9:12         ` Slava Ovsiienko
2019-11-08  9:23           ` Ferruh Yigit
2019-11-07 12:35       ` [dpdk-dev] [PATCH v4 3/3] app/testpmd: " Dekel Peled
2019-11-07 14:20         ` Iremonger, Bernard
2019-11-07 20:25         ` Ferruh Yigit
2019-11-08  6:56           ` Matan Azrad
2019-11-08 13:58           ` Dekel Peled
2019-11-08  6:28       ` [dpdk-dev] [PATCH v4 0/3] support " Matan Azrad
2019-11-08 16:42       ` [dpdk-dev] [PATCH v5 " Dekel Peled
2019-11-08 16:42         ` [dpdk-dev] [PATCH v5 1/3] ethdev: " Dekel Peled
2019-11-10 23:07           ` Ananyev, Konstantin
2019-11-11  7:40             ` Dekel Peled
2019-11-08 16:42         ` [dpdk-dev] [PATCH v5 2/3] net/mlx5: use " Dekel Peled
2019-11-08 16:42         ` [dpdk-dev] [PATCH v5 3/3] app/testpmd: " Dekel Peled
2019-11-10 23:11           ` Ananyev, Konstantin
2019-11-11  7:40             ` Dekel Peled
2019-11-08 23:07 ` [dpdk-dev] [PATCH v6] ethdev: add " Thomas Monjalon
2019-11-10 22:47   ` Ananyev, Konstantin
2019-11-11 17:47   ` [dpdk-dev] [PATCH v7 0/3] support API to set " Dekel Peled
2019-11-11 17:47     ` [dpdk-dev] [PATCH v7 1/3] ethdev: " Dekel Peled
2019-11-12  0:46       ` Ferruh Yigit
2019-11-11 17:47     ` [dpdk-dev] [PATCH v7 2/3] net/mlx5: use " Dekel Peled
2019-11-11 17:47     ` [dpdk-dev] [PATCH v7 3/3] app/testpmd: " Dekel Peled
2019-11-12  0:46       ` Ferruh Yigit
2019-11-12  0:47     ` [dpdk-dev] [PATCH v7 0/3] support " Ferruh Yigit

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=AM4PR05MB34603048172551A762B34D65B6790@AM4PR05MB3460.eurprd05.prod.outlook.com \
    --to=dekelp@mellanox.com \
    --cc=ajit.khaparde@broadcom.com \
    --cc=anatoly.burakov@intel.com \
    --cc=arybchenko@solarflare.com \
    --cc=bernard.iremonger@intel.com \
    --cc=cloud.wangxiaoyun@huawei.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=jingjing.wu@intel.com \
    --cc=john.mcnamara@intel.com \
    --cc=konstantin.ananyev@intel.com \
    --cc=marko.kovacevic@intel.com \
    --cc=matan@mellanox.com \
    --cc=maxime.coquelin@redhat.com \
    --cc=nhorman@tuxdriver.com \
    --cc=rmody@marvell.com \
    --cc=shahafs@mellanox.com \
    --cc=shshaikh@marvell.com \
    --cc=somnath.kotur@broadcom.com \
    --cc=thomas@monjalon.net \
    --cc=tiwei.bie@intel.com \
    --cc=viacheslavo@mellanox.com \
    --cc=wenzhuo.lu@intel.com \
    --cc=xuanziyang2@huawei.com \
    --cc=yongwang@vmware.com \
    --cc=zhihong.wang@intel.com \
    --cc=zhouguoyang@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK-dev Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/dpdk-dev/0 dpdk-dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dpdk-dev dpdk-dev/ https://lore.kernel.org/dpdk-dev \
		dev@dpdk.org
	public-inbox-index dpdk-dev

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git