DPDK-dev Archive on lore.kernel.org
 help / color / Atom feed
From: Jerin Jacob <jerinjacobk@gmail.com>
To: Pavan Nikhilesh <pbhagavatula@marvell.com>
Cc: Jerin Jacob <jerinj@marvell.com>,
	Marko Kovacevic <marko.kovacevic@intel.com>,
	 Ori Kam <orika@mellanox.com>,
	Bruce Richardson <bruce.richardson@intel.com>,
	 Radu Nicolau <radu.nicolau@intel.com>,
	Akhil Goyal <akhil.goyal@nxp.com>,
	 Tomasz Kantecki <tomasz.kantecki@intel.com>,
	Sunil Kumar Kori <skori@marvell.com>,
	 John McNamara <john.mcnamara@intel.com>, dpdk-dev <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH] doc: fix service core mask used in l3fwd example
Date: Sat, 15 Feb 2020 13:00:04 +0530
Message-ID: <CALBAE1PD=VZQ2HHXCB2Ga=8JDS-EEOa9kYtUL13WzDzx8Buicw@mail.gmail.com> (raw)
In-Reply-To: <20200207053356.265-1-pbhagavatula@marvell.com>

On Fri, Feb 7, 2020 at 11:04 AM <pbhagavatula@marvell.com> wrote:
>
> From: Pavan Nikhilesh <pbhagavatula@marvell.com>
>
> Service core mask should be a hexadecimal value rather than a range of
> lcores.
>
> Bugzilla ID: 392
> Fixes: 55499896d91a ("doc: add event mode to l3fwd guide")
>
> Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>

Applied to dpdk-next-eventdev/master. Thanks.



> ---
>  doc/guides/sample_app_ug/l3_forward.rst | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/doc/guides/sample_app_ug/l3_forward.rst b/doc/guides/sample_app_ug/l3_forward.rst
> index 153e46893..07c8d4493 100644
> --- a/doc/guides/sample_app_ug/l3_forward.rst
> +++ b/doc/guides/sample_app_ug/l3_forward.rst
> @@ -166,7 +166,7 @@ scheduler. Following is the sample command:
>
>  .. code-block:: console
>
> -    ./build/l3fwd -l 0-7 -s 0-3 -n 4 --vdev event_sw0 -- -p 0x3 --mode=eventdev --eventq-sched=ordered
> +    ./build/l3fwd -l 0-7 -s 0xf0000 -n 4 --vdev event_sw0 -- -p 0x3 --mode=eventdev --eventq-sched=ordered
>
>  In case of eventdev mode, *--config* option is not used for ethernet port
>  configuration. Instead each ethernet port will be configured with mentioned
> --
> 2.17.1
>

      reply index

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-07  5:33 pbhagavatula
2020-02-15  7:30 ` Jerin Jacob [this message]

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CALBAE1PD=VZQ2HHXCB2Ga=8JDS-EEOa9kYtUL13WzDzx8Buicw@mail.gmail.com' \
    --to=jerinjacobk@gmail.com \
    --cc=akhil.goyal@nxp.com \
    --cc=bruce.richardson@intel.com \
    --cc=dev@dpdk.org \
    --cc=jerinj@marvell.com \
    --cc=john.mcnamara@intel.com \
    --cc=marko.kovacevic@intel.com \
    --cc=orika@mellanox.com \
    --cc=pbhagavatula@marvell.com \
    --cc=radu.nicolau@intel.com \
    --cc=skori@marvell.com \
    --cc=tomasz.kantecki@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK-dev Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/dpdk-dev/0 dpdk-dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dpdk-dev dpdk-dev/ https://lore.kernel.org/dpdk-dev \
		dev@dpdk.org
	public-inbox-index dpdk-dev

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git