From: Raslan Darawsheh <rasland@mellanox.com>
To: Bing Zhao <bingz@mellanox.com>, Ori Kam <orika@mellanox.com>,
Slava Ovsiienko <viacheslavo@mellanox.com>
Cc: Matan Azrad <matan@mellanox.com>, "dev@dpdk.org" <dev@dpdk.org>,
Netanel Gonen <netanelg@mellanox.com>
Subject: Re: [dpdk-dev] [PATCH v4 0/7] add eCPRI support in mlx5 driver
Date: Fri, 17 Jul 2020 12:55:44 +0000 [thread overview]
Message-ID: <VI1PR05MB6718795FDF2B38D1C14489F3C27C0@VI1PR05MB6718.eurprd05.prod.outlook.com> (raw)
In-Reply-To: <1594969911-105341-1-git-send-email-bingz@mellanox.com>
Hi,
> -----Original Message-----
> From: Bing Zhao <bingz@mellanox.com>
> Sent: Friday, July 17, 2020 10:12 AM
> To: Ori Kam <orika@mellanox.com>; Slava Ovsiienko
> <viacheslavo@mellanox.com>
> Cc: Raslan Darawsheh <rasland@mellanox.com>; Matan Azrad
> <matan@mellanox.com>; dev@dpdk.org; Netanel Gonen
> <netanelg@mellanox.com>
> Subject: [PATCH v4 0/7] add eCPRI support in mlx5 driver
>
> This patch set is to add the eCPRI support of flow rules in mlx5 PMD
> driver. Right now, only eCPRI over Ethernet layer (including VLAN)
> is supported. eCPRI over UDP will be supported in the future. If the
> flow rule to be inserted is not supported, PMD driver will return
> error to indicate the reason of the failure.
>
> v2: listed as below
> 1. added document updates
> 2. add NIC / FW capacity check
> 3. fix mask of type in common header check and code cleanup
> v3: fix the wrong member name in the private structure
> v4: rebased and resolve conflict
>
> Bing Zhao (7):
> net/mlx5: add flow validation of eCPRI header
> net/mlx5: add flow translation of eCPRI header
> common/mlx5: add flex parser DevX structures
> common/mlx5: adding DevX command for flex parsers
> net/mlx5: create and destroy eCPRI flex parser
> net/mlx5: add eCPRI flex parser capacity check
> doc: update release notes and guides for eCPRI
>
> doc/guides/nics/mlx5.rst | 5 +
> doc/guides/rel_notes/release_20_08.rst | 1 +
> drivers/common/mlx5/mlx5_devx_cmds.c | 170
> +++++++++++++++++++++++-
> drivers/common/mlx5/mlx5_devx_cmds.h | 52 ++++++++
> drivers/common/mlx5/mlx5_prm.h | 115 +++++++++++++++-
> drivers/common/mlx5/rte_common_mlx5_version.map | 2 +
> drivers/net/mlx5/mlx5.c | 107 +++++++++++++++
> drivers/net/mlx5/mlx5.h | 19 +++
> drivers/net/mlx5/mlx5_flow.c | 107 ++++++++++++++-
> drivers/net/mlx5/mlx5_flow.h | 9 ++
> drivers/net/mlx5/mlx5_flow_dv.c | 126 ++++++++++++++++++
> 11 files changed, 704 insertions(+), 9 deletions(-)
>
> --
> 1.8.3.1
Series applied to next-net-mlx,
Kindest regards,
Raslan Darawsheh
prev parent reply other threads:[~2020-07-17 12:55 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-08 14:43 [dpdk-dev] [PATCH 0/5] add eCPRI support in mlx5 driver Bing Zhao
2020-07-08 14:43 ` [dpdk-dev] [PATCH 1/5] net/mlx5: add flow validation of eCPRI header Bing Zhao
2020-07-08 14:43 ` [dpdk-dev] [PATCH 2/5] net/mlx5: add flow translation " Bing Zhao
2020-07-09 12:22 ` Thomas Monjalon
2020-07-09 14:47 ` Bing Zhao
2020-07-08 14:43 ` [dpdk-dev] [PATCH 3/5] net/mlx5: add flex parser devx structures Bing Zhao
2020-07-08 14:43 ` [dpdk-dev] [PATCH 4/5] net/mlx5: adding Devx command for flex parsers Bing Zhao
2020-07-08 14:43 ` [dpdk-dev] [PATCH 5/5] net/mlx5: create and destroy eCPRI flex parser Bing Zhao
2020-07-16 13:49 ` [dpdk-dev] [PATCH v2 0/7] add eCPRI support in mlx5 driver Bing Zhao
2020-07-16 13:49 ` [dpdk-dev] [PATCH v2 1/7] net/mlx5: add flow validation of eCPRI header Bing Zhao
2020-07-16 13:49 ` [dpdk-dev] [PATCH v2 2/7] net/mlx5: add flow translation " Bing Zhao
2020-07-16 13:49 ` [dpdk-dev] [PATCH v2 3/7] common/mlx5: add flex parser DevX structures Bing Zhao
2020-07-16 13:49 ` [dpdk-dev] [PATCH v2 4/7] common/mlx5: adding DevX command for flex parsers Bing Zhao
2020-07-16 13:49 ` [dpdk-dev] [PATCH v2 5/7] net/mlx5: create and destroy eCPRI flex parser Bing Zhao
2020-07-16 13:49 ` [dpdk-dev] [PATCH v2 6/7] net/mlx5: add eCPRI flex parser capacity check Bing Zhao
2020-07-16 13:49 ` [dpdk-dev] [PATCH v2 7/7] doc: update release notes and guides for eCPRI Bing Zhao
2020-07-16 14:23 ` [dpdk-dev] [PATCH v3 0/7] add eCPRI support in mlx5 driver Bing Zhao
2020-07-16 14:23 ` [dpdk-dev] [PATCH v3 1/7] net/mlx5: add flow validation of eCPRI header Bing Zhao
2020-07-16 15:04 ` Slava Ovsiienko
2020-07-16 14:23 ` [dpdk-dev] [PATCH v3 2/7] net/mlx5: add flow translation " Bing Zhao
2020-07-16 15:04 ` Slava Ovsiienko
2020-07-16 14:23 ` [dpdk-dev] [PATCH v3 3/7] common/mlx5: add flex parser DevX structures Bing Zhao
2020-07-16 15:04 ` Slava Ovsiienko
2020-07-16 14:23 ` [dpdk-dev] [PATCH v3 4/7] common/mlx5: adding DevX command for flex parsers Bing Zhao
2020-07-16 15:05 ` Slava Ovsiienko
2020-07-16 14:23 ` [dpdk-dev] [PATCH v3 5/7] net/mlx5: create and destroy eCPRI flex parser Bing Zhao
2020-07-16 15:05 ` Slava Ovsiienko
2020-07-16 14:23 ` [dpdk-dev] [PATCH v3 6/7] net/mlx5: add eCPRI flex parser capacity check Bing Zhao
2020-07-16 15:05 ` Slava Ovsiienko
2020-07-16 14:23 ` [dpdk-dev] [PATCH v3 7/7] doc: update release notes and guides for eCPRI Bing Zhao
2020-07-16 15:05 ` Slava Ovsiienko
2020-07-17 7:11 ` [dpdk-dev] [PATCH v4 0/7] add eCPRI support in mlx5 driver Bing Zhao
2020-07-17 7:11 ` [dpdk-dev] [PATCH v4 1/7] net/mlx5: add flow validation of eCPRI header Bing Zhao
2020-07-17 7:11 ` [dpdk-dev] [PATCH v4 2/7] net/mlx5: add flow translation " Bing Zhao
2020-07-17 7:11 ` [dpdk-dev] [PATCH v4 3/7] common/mlx5: add flex parser DevX structures Bing Zhao
2020-07-17 7:11 ` [dpdk-dev] [PATCH v4 4/7] common/mlx5: adding DevX command for flex parsers Bing Zhao
2020-07-17 7:11 ` [dpdk-dev] [PATCH v4 5/7] net/mlx5: create and destroy eCPRI flex parser Bing Zhao
2020-07-17 7:11 ` [dpdk-dev] [PATCH v4 6/7] net/mlx5: add eCPRI flex parser capacity check Bing Zhao
2020-07-17 7:11 ` [dpdk-dev] [PATCH v4 7/7] doc: update release notes and guides for eCPRI Bing Zhao
2020-07-17 12:55 ` Raslan Darawsheh [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=VI1PR05MB6718795FDF2B38D1C14489F3C27C0@VI1PR05MB6718.eurprd05.prod.outlook.com \
--to=rasland@mellanox.com \
--cc=bingz@mellanox.com \
--cc=dev@dpdk.org \
--cc=matan@mellanox.com \
--cc=netanelg@mellanox.com \
--cc=orika@mellanox.com \
--cc=viacheslavo@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).