DPDK-dev Archive on lore.kernel.org
 help / color / Atom feed
* [dpdk-dev] [PATCH 1/2] timer: use rte_mp_msg to pass TSC hz to secondary procs
@ 2019-08-15 11:27 Jim Harris
  2019-08-15 11:27 ` [dpdk-dev] [PATCH 2/2] timer: don't check tsc flags in secondary processes Jim Harris
                   ` (2 more replies)
  0 siblings, 3 replies; 5+ messages in thread
From: Jim Harris @ 2019-08-15 11:27 UTC (permalink / raw)
  To: dev, anatoly.burakov

rte_eal_init() is much faster in secondary processes since
hugepages don't need to be zeroed.  But there's still
non-trivial delays in the timer subsystem initialization
due to the 100ms sleep used to calculate TSC hz.  So use
the rte_mp_msg framework to allow secondary processes
to get the TSC hz from the primary process.

This cuts rte_eal_init() execution time in a secondary
process from 165ms to 66ms in my test program.

Signed-off-by: Jim Harris <james.r.harris@intel.com>
---
 lib/librte_eal/common/eal_common_timer.c |   70 +++++++++++++++++++++++++++++-
 1 file changed, 68 insertions(+), 2 deletions(-)

diff --git a/lib/librte_eal/common/eal_common_timer.c b/lib/librte_eal/common/eal_common_timer.c
index 145543de7..a2ad0f8ca 100644
--- a/lib/librte_eal/common/eal_common_timer.c
+++ b/lib/librte_eal/common/eal_common_timer.c
@@ -15,9 +15,16 @@
 #include <rte_log.h>
 #include <rte_cycles.h>
 #include <rte_pause.h>
+#include <rte_eal.h>
 
 #include "eal_private.h"
 
+#define EAL_TIMER_MP "eal_timer_mp_sync"
+
+struct timer_mp_param {
+	uint64_t tsc;
+};
+
 /* The frequency of the RDTSC timer resolution */
 static uint64_t eal_tsc_resolution_hz;
 
@@ -74,8 +81,8 @@ estimate_tsc_freq(void)
 	return RTE_ALIGN_MUL_NEAR(rte_rdtsc() - start, CYC_PER_10MHZ);
 }
 
-void
-set_tsc_freq(void)
+static void
+set_tsc_freq_primary(void)
 {
 	uint64_t freq;
 
@@ -89,6 +96,65 @@ set_tsc_freq(void)
 	eal_tsc_resolution_hz = freq;
 }
 
+static void
+set_tsc_freq_secondary(void)
+{
+	struct rte_mp_msg mp_req;
+	struct rte_mp_reply mp_reply;
+	struct timer_mp_param *r;
+	struct timespec ts = {.tv_sec = 1, .tv_nsec = 0};
+
+	memset(&mp_req, 0, sizeof(mp_req));
+	strcpy(mp_req.name, EAL_TIMER_MP);
+	if (rte_mp_request_sync(&mp_req, &mp_reply, &ts) || mp_reply.nb_received != 1) {
+		/* We weren't able to get the tsc hz from the primary process.  So we will
+		 * just calculate it here in the secondary process instead.
+		 */
+		set_tsc_freq_primary();
+		return;
+	}
+
+	r = (struct timer_mp_param *)mp_reply.msgs[0].param;
+	eal_tsc_resolution_hz = r->tsc;
+	free(mp_reply.msgs);
+}
+
+static int
+timer_mp_primary(__attribute__((unused)) const struct rte_mp_msg *msg, const void *peer)
+{
+	struct rte_mp_msg reply;
+	struct timer_mp_param *r = (struct timer_mp_param *)reply.param;
+
+	memset(&reply, 0, sizeof(reply));
+	r->tsc = eal_tsc_resolution_hz;
+	strcpy(reply.name, EAL_TIMER_MP);
+	reply.len_param = sizeof(*r);
+
+	return rte_mp_reply(&reply, peer);
+}
+
+void
+set_tsc_freq(void)
+{
+	int rc;
+
+	/* We use a 100ms timer to calculate the TSC hz.  We can save this 100ms in
+	 * secondary processes, by getting the TSC hz from the primary process.
+	 * So register an mp_action callback in the primary process, which secondary
+	 * processes will use to get the TSC hz.
+	 */
+	if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
+		set_tsc_freq_primary();
+		rc = rte_mp_action_register(EAL_TIMER_MP, timer_mp_primary);
+		if (rc) {
+			RTE_LOG(WARNING, EAL, "Could not register mp_action - secondary "
+				" processes will calculate TSC independently.\n");
+		}
+	} else {
+		set_tsc_freq_secondary();
+	}
+}
+
 void rte_delay_us_callback_register(void (*userfunc)(unsigned int))
 {
 	rte_delay_us = userfunc;


^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, back to index

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-15 11:27 [dpdk-dev] [PATCH 1/2] timer: use rte_mp_msg to pass TSC hz to secondary procs Jim Harris
2019-08-15 11:27 ` [dpdk-dev] [PATCH 2/2] timer: don't check tsc flags in secondary processes Jim Harris
2019-08-16  7:56 ` [dpdk-dev] [PATCH 1/2] timer: use rte_mp_msg to pass TSC hz to secondary procs Burakov, Anatoly
2019-08-16 19:01   ` Harris, James R
2019-08-26  9:54 ` Bruce Richardson

DPDK-dev Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/dpdk-dev/0 dpdk-dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dpdk-dev dpdk-dev/ https://lore.kernel.org/dpdk-dev \
		dev@dpdk.org dpdk-dev@archiver.kernel.org
	public-inbox-index dpdk-dev


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/ public-inbox