DPDK-dev Archive on lore.kernel.org
 help / color / Atom feed
From: Ferruh Yigit <ferruh.yigit@intel.com>
To: Matan Azrad <matan@mellanox.com>,
	Dekel Peled <dekelp@mellanox.com>,
	"john.mcnamara@intel.com" <john.mcnamara@intel.com>,
	"marko.kovacevic@intel.com" <marko.kovacevic@intel.com>,
	"nhorman@tuxdriver.com" <nhorman@tuxdriver.com>,
	"ajit.khaparde@broadcom.com" <ajit.khaparde@broadcom.com>,
	"somnath.kotur@broadcom.com" <somnath.kotur@broadcom.com>,
	"anatoly.burakov@intel.com" <anatoly.burakov@intel.com>,
	"xuanziyang2@huawei.com" <xuanziyang2@huawei.com>,
	"cloud.wangxiaoyun@huawei.com" <cloud.wangxiaoyun@huawei.com>,
	"zhouguoyang@huawei.com" <zhouguoyang@huawei.com>,
	"wenzhuo.lu@intel.com" <wenzhuo.lu@intel.com>,
	"konstantin.ananyev@intel.com" <konstantin.ananyev@intel.com>,
	Shahaf Shuler <shahafs@mellanox.com>,
	Slava Ovsiienko <viacheslavo@mellanox.com>,
	"rmody@marvell.com" <rmody@marvell.com>,
	"shshaikh@marvell.com" <shshaikh@marvell.com>,
	"maxime.coquelin@redhat.com" <maxime.coquelin@redhat.com>,
	"tiwei.bie@intel.com" <tiwei.bie@intel.com>,
	"zhihong.wang@intel.com" <zhihong.wang@intel.com>,
	"yongwang@vmware.com" <yongwang@vmware.com>,
	Thomas Monjalon <thomas@monjalon.net>,
	"arybchenko@solarflare.com" <arybchenko@solarflare.com>,
	"jingjing.wu@intel.com" <jingjing.wu@intel.com>,
	"bernard.iremonger@intel.com" <bernard.iremonger@intel.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH v4 1/3] ethdev: support API to set max LRO packet size
Date: Mon, 11 Nov 2019 11:15:02 +0000
Message-ID: <b2d5936b-a3cf-8ee7-b1ae-e6b58b82c1be@intel.com> (raw)
In-Reply-To: <AM0PR0502MB40197ED45C3B3C066332A19AD27A0@AM0PR0502MB4019.eurprd05.prod.outlook.com>

On 11/9/2019 6:20 PM, Matan Azrad wrote:
> Hi
> 
> From: Ferruh Yigit
>> On 11/8/2019 11:56 AM, Matan Azrad wrote:
>>>
>>>
>>> From: Ferruh Yigit
>>>> On 11/8/2019 10:10 AM, Matan Azrad wrote:
>>>>>
>>>>>
>>>>> From: Ferruh Yigit
>>>>>> On 11/8/2019 6:54 AM, Matan Azrad wrote:
>>>>>>> Hi
>>>>>>>
>>>>>>> From: Ferruh Yigit
>>>>>>>> On 11/7/2019 12:35 PM, Dekel Peled wrote:
>>>>>>>>> @@ -1266,6 +1286,18 @@ struct rte_eth_dev *
>>>>>>>>>
>>>>>>>> 	RTE_ETHER_MAX_LEN;
>>>>>>>>>  	}
>>>>>>>>>
>>>>>>>>> +	/*
>>>>>>>>> +	 * If LRO is enabled, check that the maximum aggregated
>>>> packet
>>>>>>>>> +	 * size is supported by the configured device.
>>>>>>>>> +	 */
>>>>>>>>> +	if (dev_conf->rxmode.offloads &
>>>> DEV_RX_OFFLOAD_TCP_LRO) {
>>>>>>>>> +		ret = check_lro_pkt_size(
>>>>>>>>> +				port_id, dev_conf-
>>>>>>>>> rxmode.max_lro_pkt_size,
>>>>>>>>> +				dev_info.max_lro_pkt_size);
>>>>>>>>> +		if (ret != 0)
>>>>>>>>> +			goto rollback;
>>>>>>>>> +	}
>>>>>>>>> +
>>>>>>>>
>>>>>>>> This check forces applications that enable LRO to provide
>>>>>> 'max_lro_pkt_size'
>>>>>>>> config value.
>>>>>>>
>>>>>>> Yes.(we can break an API, we noticed it)
>>>>>>
>>>>>> I am not talking about API/ABI breakage, that part is OK.
>>>>>> With this check, if the application requested LRO offload but not
>>>>>> provided 'max_lro_pkt_size' value, device configuration will fail.
>>>>>>
>>>>> Yes
>>>>>> Can there be a case application is good with whatever the PMD can
>>>>>> support as max?
>>>>> Yes can be - you know, we can do everything we want but it is better
>>>>> to be
>>>> consistent:
>>>>> Due to the fact of Max rx pkt len field is mandatory for JUMBO
>>>>> offload, max
>>>> lro pkt len should be mandatory for LRO offload.
>>>>>
>>>>> So your question is actually why both, non-lro packets and LRO
>>>>> packets max
>>>> size are mandatory...
>>>>>
>>>>>
>>>>> I think it should be important values for net applications management.
>>>>> Also good for mbuf size managements.
>>>>>
>>>>>>>
>>>>>>>> - Why it is mandatory now, how it was working before if it is
>>>>>>>> mandatory value?
>>>>>>>
>>>>>>> It is the same as max_rx_pkt_len which is mandatory for jumbo
>>>>>>> frame
>>>>>> offload.
>>>>>>> So now, when the user configures a LRO offload he must to set max
>>>>>>> lro pkt
>>>>>> len.
>>>>>>> We don't want to confuse the user here with the max rx pkt len
>>>>>> configurations and behaviors, they should be with same logic.
>>>>>>>
>>>>>>> This parameter defines well the LRO behavior.
>>>>>>> Before this, each PMD took its own interpretation to what should
>>>>>>> be the
>>>>>> maximum size for LRO aggregated packets.
>>>>>>> Now, the user must say what is his intension, and the ethdev can
>>>>>>> limit it
>>>>>> according to the device capability.
>>>>>>> By this way, also, the PMD can organize\optimize its data-path more.
>>>>>>> Also, the application can create different mempools for LRO queues
>>>>>>> to
>>>>>> allow bigger packet receiving for LRO traffic.
>>>>>>>
>>>>>>>> - What happens if PMD doesn't provide 'max_lro_pkt_size', so it is
>> '0'?
>>>>>>> Yes, you can see the feature description Dekel added.
>>>>>>> This patch also updates all the PMDs support an LRO for non-0 value.
>>>>>>
>>>>>> Of course I can see the updates Matan, my point is "What happens if
>>>>>> PMD doesn't provide 'max_lro_pkt_size'",
>>>>>> 1) There is no check for it right, so it is acceptable?
>>>>>
>>>>> There is check.
>>>>> If the capability is 0, any non-zero configuration will fail.
>>>>>
>>>>>> 2) Are we making this filed mandatory to provide for PMDs, it is
>>>>>> easy to make new fields mandatory for PMDs but is this really
>> necessary?
>>>>>
>>>>> Yes, for consistence.
>>>>>
>>>>>>>
>>>>>>> as same as max rx pkt len, no?
>>>>>>>
>>>>>>>> - What do you think setting 'max_lro_pkt_size' config value to
>>>>>>>> what PMD provided if application doesn't provide it?
>>>>>>> Same answers as above.
>>>>>>>
>>>>>>
>>>>>> If application doesn't care the value, as it has been till now, and
>>>>>> not provided explicit 'max_lro_pkt_size', why not ethdev level use
>>>>>> the value provided by PMD instead of failing?
>>>>>
>>>>> Again, same question we can ask on max rx pkt len.
>>>>>
>>>>> Looks like the packet size is very important value which should be
>>>>> set by
>>>> the application.
>>>>>
>>>>> Previous applications have no option to configure it, so they
>>>>> haven't
>>>> configure it, (probably cover it somehow) I think it is our miss to
>>>> supply this info.
>>>>>
>>>>> Let's do it in same way as we do max rx pkt len (as this patch main idea).
>>>>> Later, we can change both to other meaning.
>>>>>
>>>>
>>>> I think it is not a good reason to introduce a new mandatory config
>>>> option for application because of 'max_rx_pkt_len' does it.
>>>
>>> It is mandatory only if LRO offload is configured.
>>>
>>>> Will it work, if:
>>>> - If application doesn't provide this value, use the PMD max
>>>
>>> May cause a problem if the mbuf size is not enough for the PMD maximum.
>>
>> OK, this is what I was missing, for this case I was thinking max_rx_pkt_len will
>> be used but you already explained that application may want to use different
>> mempools for LRO queues.
>>
> So , are you agree with the idea?
> 
>> For this case shouldn't PMDs take the 'rxmode.max_lro_pkt_size' into
>> account and program the device accordingly (of course in LRO enabled case)
>> ?
>> This part seems missing and should be highlighted to other PMD maintainers.
> 
> 
> Yes, you are right.
> PMDs must limit the LRO aggregated packet according to the new field,
> And it probably very hard for the patch introducer to understand how to do it for each PMD. 
> 
> I think each new configuration requires other maintainers\developers to adjust their own PMD code to the new configuration and it should be done in limited time.

Agree.
But experience showed that this synchronization is not as easy as it sounds,
whoever changing the interface/library says other PMDs should reflect the change
but most of the times other PMD maintainers not aware of it or if they do they
have other priorities for the release, so the changes should be in a way to give
more time to PMDs to adapt it and during this time library change shouldn't
break other PMDs.

> 
> My suggestion here:
> 1. To reserve the info field and the configuration field for rc2.(if it is critical not to break ABI for rc3)
> 2. To merge the ethdev patch in the start of rc3.
> 3. Request each relevant PMD to adjust its PMD to the new configuration for the end of rc3.
> 	Note: this should be small change and only for ~5 PMDs:
> 		a. Introduce the info field according to the device ability.
> 		b. For each LRO queue:
> 			Use the LRO max size configuration instead of the current max rx pkt len configuration(looks like small condition). 
> 
> What do you think?

There is already a v6 which only updates dev_info fields to have the
'max_lro_pktlen' field, the PMD updates there also looks safe, so I think we can
go with it for rc2.

For the configuration part, I suggest deferring it next release, which gives
more time for discussion and enough time for other PMDs to implement it.


And related configuration, right now devices already configured to limit the
packet size to 'max_rx_pkt_len', it can be an optimization to increase it to
'max_lro_pkt_len' for the queues LRO is supported, why not make this
configuration more explicitly with specific API as Konstantin suggested [1],
this way it only affects the applications that are interested in and the PMDs
that want to support this.
Current implementation is under 'rte_eth_dev_configure()' which is used by all
DPDK applications and impact of changing it is much larger, also it makes
mandatory for applications to provide this config option when LRO enabled,
explicit API gives same result without making a mandatory config option.

[1]
int rte_eth_dev_set_max_lro(uint16_t port_id, uint32_t lro);


  parent reply index

Thread overview: 79+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-05  8:40 [dpdk-dev] [PATCH 0/3] " Dekel Peled
2019-11-05  8:40 ` [dpdk-dev] [PATCH 1/3] ethdev: " Dekel Peled
2019-11-05 12:39   ` Andrew Rybchenko
2019-11-05 13:09     ` Thomas Monjalon
2019-11-05 14:18     ` Dekel Peled
2019-11-05 14:27       ` Andrew Rybchenko
2019-11-05 14:51         ` Dekel Peled
2019-11-05  8:40 ` [dpdk-dev] [PATCH 2/3] net/mlx5: use " Dekel Peled
2019-11-05  8:40 ` [dpdk-dev] [PATCH 3/3] app/testpmd: " Dekel Peled
2019-11-05  9:35 ` [dpdk-dev] [PATCH 0/3] support " Matan Azrad
2019-11-06 11:34 ` [dpdk-dev] [PATCH v2 " Dekel Peled
2019-11-06 11:34   ` [dpdk-dev] [PATCH v2 1/3] ethdev: " Dekel Peled
2019-11-06 12:26     ` Thomas Monjalon
2019-11-06 12:39       ` Dekel Peled
2019-11-06 11:34   ` [dpdk-dev] [PATCH v2 2/3] net/mlx5: use " Dekel Peled
2019-11-06 11:34   ` [dpdk-dev] [PATCH v2 3/3] app/testpmd: " Dekel Peled
2019-11-06 12:35     ` Iremonger, Bernard
2019-11-06 13:14       ` Dekel Peled
2019-11-06 14:28   ` [dpdk-dev] [PATCH v3 0/3] support " Dekel Peled
2019-11-06 14:28     ` [dpdk-dev] [PATCH v3 1/3] ethdev: " Dekel Peled
2019-11-07 11:57       ` [dpdk-dev] [EXT] " Shahed Shaikh
2019-11-07 12:18         ` Dekel Peled
2019-11-06 14:28     ` [dpdk-dev] [PATCH v3 2/3] net/mlx5: use " Dekel Peled
2019-11-06 14:28     ` [dpdk-dev] [PATCH v3 3/3] app/testpmd: " Dekel Peled
2019-11-06 16:41     ` [dpdk-dev] [PATCH v3 0/3] support " Iremonger, Bernard
2019-11-07  6:10       ` Dekel Peled
2019-11-07 12:35     ` [dpdk-dev] [PATCH v4 " Dekel Peled
2019-11-07 12:35       ` [dpdk-dev] [PATCH v4 1/3] ethdev: " Dekel Peled
2019-11-07 20:15         ` Ferruh Yigit
2019-11-08  6:54           ` Matan Azrad
2019-11-08  9:19             ` Ferruh Yigit
2019-11-08 10:10               ` Matan Azrad
2019-11-08 11:37                 ` Ferruh Yigit
2019-11-08 11:56                   ` Matan Azrad
2019-11-08 12:51                     ` Ferruh Yigit
2019-11-08 16:11                       ` Dekel Peled
2019-11-08 16:53                         ` Ferruh Yigit
2019-11-09 18:20                       ` Matan Azrad
2019-11-10 23:40                         ` Ananyev, Konstantin
2019-11-11  8:01                           ` Matan Azrad
2019-11-12 18:31                             ` Ananyev, Konstantin
2019-11-11 11:15                         ` Ferruh Yigit [this message]
2019-11-11 11:33                           ` Matan Azrad
2019-11-11 12:21                             ` Ferruh Yigit
2019-11-11 13:32                               ` Matan Azrad
2019-11-08 13:11                     ` Ananyev, Konstantin
2019-11-08 14:10                       ` Dekel Peled
2019-11-08 14:52                         ` Ananyev, Konstantin
2019-11-08 16:08                           ` Dekel Peled
2019-11-08 16:28                             ` Ananyev, Konstantin
2019-11-09 18:26                               ` Matan Azrad
2019-11-10 22:51                                 ` Ananyev, Konstantin
2019-11-11  6:53                                   ` Matan Azrad
2019-11-07 12:35       ` [dpdk-dev] [PATCH v4 2/3] net/mlx5: use " Dekel Peled
2019-11-08  9:12         ` Slava Ovsiienko
2019-11-08  9:23           ` Ferruh Yigit
2019-11-07 12:35       ` [dpdk-dev] [PATCH v4 3/3] app/testpmd: " Dekel Peled
2019-11-07 14:20         ` Iremonger, Bernard
2019-11-07 20:25         ` Ferruh Yigit
2019-11-08  6:56           ` Matan Azrad
2019-11-08 13:58           ` Dekel Peled
2019-11-08  6:28       ` [dpdk-dev] [PATCH v4 0/3] support " Matan Azrad
2019-11-08 16:42       ` [dpdk-dev] [PATCH v5 " Dekel Peled
2019-11-08 16:42         ` [dpdk-dev] [PATCH v5 1/3] ethdev: " Dekel Peled
2019-11-10 23:07           ` Ananyev, Konstantin
2019-11-11  7:40             ` Dekel Peled
2019-11-08 16:42         ` [dpdk-dev] [PATCH v5 2/3] net/mlx5: use " Dekel Peled
2019-11-08 16:42         ` [dpdk-dev] [PATCH v5 3/3] app/testpmd: " Dekel Peled
2019-11-10 23:11           ` Ananyev, Konstantin
2019-11-11  7:40             ` Dekel Peled
2019-11-08 23:07 ` [dpdk-dev] [PATCH v6] ethdev: add " Thomas Monjalon
2019-11-10 22:47   ` Ananyev, Konstantin
2019-11-11 17:47   ` [dpdk-dev] [PATCH v7 0/3] support API to set " Dekel Peled
2019-11-11 17:47     ` [dpdk-dev] [PATCH v7 1/3] ethdev: " Dekel Peled
2019-11-12  0:46       ` Ferruh Yigit
2019-11-11 17:47     ` [dpdk-dev] [PATCH v7 2/3] net/mlx5: use " Dekel Peled
2019-11-11 17:47     ` [dpdk-dev] [PATCH v7 3/3] app/testpmd: " Dekel Peled
2019-11-12  0:46       ` Ferruh Yigit
2019-11-12  0:47     ` [dpdk-dev] [PATCH v7 0/3] support " Ferruh Yigit

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=b2d5936b-a3cf-8ee7-b1ae-e6b58b82c1be@intel.com \
    --to=ferruh.yigit@intel.com \
    --cc=ajit.khaparde@broadcom.com \
    --cc=anatoly.burakov@intel.com \
    --cc=arybchenko@solarflare.com \
    --cc=bernard.iremonger@intel.com \
    --cc=cloud.wangxiaoyun@huawei.com \
    --cc=dekelp@mellanox.com \
    --cc=dev@dpdk.org \
    --cc=jingjing.wu@intel.com \
    --cc=john.mcnamara@intel.com \
    --cc=konstantin.ananyev@intel.com \
    --cc=marko.kovacevic@intel.com \
    --cc=matan@mellanox.com \
    --cc=maxime.coquelin@redhat.com \
    --cc=nhorman@tuxdriver.com \
    --cc=rmody@marvell.com \
    --cc=shahafs@mellanox.com \
    --cc=shshaikh@marvell.com \
    --cc=somnath.kotur@broadcom.com \
    --cc=thomas@monjalon.net \
    --cc=tiwei.bie@intel.com \
    --cc=viacheslavo@mellanox.com \
    --cc=wenzhuo.lu@intel.com \
    --cc=xuanziyang2@huawei.com \
    --cc=yongwang@vmware.com \
    --cc=zhihong.wang@intel.com \
    --cc=zhouguoyang@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK-dev Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/dpdk-dev/0 dpdk-dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dpdk-dev dpdk-dev/ https://lore.kernel.org/dpdk-dev \
		dev@dpdk.org
	public-inbox-index dpdk-dev

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git