dev.dpdk.org archive mirror
 help / color / mirror / Atom feed
From: Nithin Kumar Dabilpuram <ndabilpuram@marvell.com>
To: Jerin Jacob Kollanukkaran <jerinj@marvell.com>,
	"Hyong Youb Kim (hyonkim)" <hyonkim@cisco.com>,
	David Marchand <david.marchand@redhat.com>,
	"Thomas Monjalon" <thomas@monjalon.net>,
	Ferruh Yigit <ferruh.yigit@intel.com>,
	"Bruce Richardson" <bruce.richardson@intel.com>
Cc: "John Daley (johndale)" <johndale@cisco.com>,
	Shahed Shaikh <shshaikh@marvell.com>,
	"dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [RFC PATCH v3 2/3] eal: add mask and unmask interrupt APIs
Date: Wed, 17 Jul 2019 12:04:53 +0000	[thread overview]
Message-ID: <efea7cf7-a8ef-0fa7-d4c7-beda9e02c72a@marvell.com> (raw)
In-Reply-To: <BYAPR18MB2424874BA27AF9C19F51635EC8C90@BYAPR18MB2424.namprd18.prod.outlook.com>


On 7/17/2019 4:46 PM, Jerin Jacob Kollanukkaran wrote:
>> -----Original Message-----
>> From: Hyong Youb Kim (hyonkim) <hyonkim@cisco.com>
>> Sent: Wednesday, July 17, 2019 4:36 PM
>> To: Jerin Jacob Kollanukkaran <jerinj@marvell.com>; Nithin Kumar
>> Dabilpuram <ndabilpuram@marvell.com>; David Marchand
>> <david.marchand@redhat.com>; Thomas Monjalon
>> <thomas@monjalon.net>; Ferruh Yigit <ferruh.yigit@intel.com>; Bruce
>> Richardson <bruce.richardson@intel.com>
>> Cc: John Daley (johndale) <johndale@cisco.com>; Shahed Shaikh
>> <shshaikh@marvell.com>; dev@dpdk.org
>> Subject: RE: [RFC PATCH v3 2/3] eal: add mask and unmask interrupt APIs
>>
>>> -----Original Message-----
>>> From: Jerin Jacob Kollanukkaran <jerinj@marvell.com>
>>> Sent: Wednesday, July 17, 2019 7:44 PM
>>> To: Hyong Youb Kim (hyonkim) <hyonkim@cisco.com>; Nithin Kumar
>>> Dabilpuram <ndabilpuram@marvell.com>; David Marchand
>>> <david.marchand@redhat.com>; Thomas Monjalon
>> <thomas@monjalon.net>;
>>> Ferruh Yigit <ferruh.yigit@intel.com>; Bruce Richardson
>>> <bruce.richardson@intel.com>
>>> Cc: John Daley (johndale) <johndale@cisco.com>; Shahed Shaikh
>>> <shshaikh@marvell.com>; dev@dpdk.org
>>> Subject: RE: [RFC PATCH v3 2/3] eal: add mask and unmask interrupt
>>> APIs
>>>
>>>>> I think, it vary from the perspective of IRQ Chip(or controller)
>>>>> vs NIC
>>>>> register(Source) PoV.
>>>>> Since the API starts from rte_intr_* it is more of controller so
>>>>> _ack_ make sense Other reason for ack:
>>>>> 1) It will enforce that it needs to be called form ISR
>>>>> 2) It would be have been really correct to unmask if
>>>>> VFIO+MSIx+Linux supports it
>>>>> 3) if it is ack, no need to add unmask counterpart, the _mask_ API
>>>>>
>>>> Just curious, what you mean by irq controller? Ack/mask/unmask PIOs
>>>> all
>>> go
>>>
>>> Programmable Interrupt Controller. Like Intel 8259A, GIC from ARM etc
>>> The drivers in linux/drivers/irqchip/
>>>
>>>> to the NIC. It is the NIC that asserts/de-asserts irq..
>>>>
>>>>>> Besides the name, are we agreeing that we want these?
>>>>>> - Unmask if INTx
>>>>> Yes
>>>>>
>>>>>> - Nothing if MSI/MSI-X
>>>>> Yes for MSI over VFIO
>>>>> No for MSI over UIO/igb_uio
>>>>>
>>>> I guess I was not clear. For MSI/MSI-X, we do not want to do
>>>> mask/unmask regardless of vfio-pci/igb_uio.  Below is my comment
>>>> about linux/windows/freebsd from an earlier email. Do you disagree?
>>>> I am sure there are plenty of kernel NIC driver guys here. Please
>>>> correct me if I am mistaken...
>>>
>>> For some reason, igb_uio kernel driver mask the interrupt for MSIx.
>>> We need to ack or unmask if needs to work with MSIX + IGB_UIO.
>>>
>>> See
>>> pci_uio_alloc_resource()
>>>          if (dev->kdrv == RTE_KDRV_IGB_UIO)
>>>                  dev->intr_handle.type = RTE_INTR_HANDLE_UIO;
>>>          else {
>>>                  dev->intr_handle.type = RTE_INTR_HANDLE_UIO_INTX;
>>>
>>> igbuio_pci_irqcontrol() for masking in kernel.
>>>
>> igb_uio does not auto-mask MSI/MSI-X.
> I have not tested igbuio as we don't specific NIC + IGB_UIO platform.
>
> The observation based on following code. see code under HAVE_PCI_MSI_MASK_IRQ
>
> static int
> igbuio_pci_irqcontrol(struct uio_info *info, s32 irq_state)
> {
>          struct rte_uio_pci_dev *udev = info->priv;
>          struct pci_dev *pdev = udev->pdev;
>
> #ifdef HAVE_PCI_MSI_MASK_IRQ
>          struct irq_data *irq = irq_get_irq_data(udev->info.irq);
> #endif
>
>          pci_cfg_access_lock(pdev);
>
>          if (udev->mode == RTE_INTR_MODE_MSIX || udev->mode == RTE_INTR_MODE_MSI) {
> #ifdef HAVE_PCI_MSI_MASK_IRQ
>                  if (irq_state == 1)
>                          pci_msi_unmask_irq(irq);
>                  else
>                          pci_msi_mask_irq(irq);
> #else
>                  igbuio_mask_irq(pdev, udev->mode, irq_state);
> #endif
>          }
>
>          if (udev->mode == RTE_INTR_MODE_LEGACY)
>                  pci_intx(pdev, !!irq_state);
>
>          pci_cfg_access_unlock(pdev);
>
>          return 0;
> }
>
>> static irqreturn_t
>> igbuio_pci_irqhandler(int irq, void *dev_id) {
>>          struct rte_uio_pci_dev *udev = (struct rte_uio_pci_dev *)dev_id;
>>          struct uio_info *info = &udev->info;
>>
>>          /* Legacy mode need to mask in hardware */
>>          if (udev->mode == RTE_INTR_MODE_LEGACY &&
>>              !pci_check_and_mask_intx(udev->pdev))
>>                  return IRQ_NONE;
>>
>>          uio_event_notify(info);
>>
>>          /* Message signal mode, no share IRQ and automasked */
>>          return IRQ_HANDLED;
>> }
>>
>> Also tested just now with igb_uio. The driver does not need to call
>> rte_intr_enable(), and it keeps getting interrupts without any issues.
>   If you are sure, we can make MSIX+IGB_UIO as NOP in rte_intr_ack()

Ok. Another problem is that we might not be able to distinguish in case 
of IGB_UIO
at rte_intr_ack() level if underlying interrupt is a INTx or MSIx. See 
igbuio_pci_enable_interrupts() that
finds and stores that mode in uio->mode.

So we think leaving the behavior as earlier is needed and simpler as it 
meets the current expectation.

>
>> Am I missing something?
>>
>> -Hyong
>>
>>> So it is more of making inline with igb_uio kernel driver AND not
>>> break The existing drivers which was using rte_intr_enable in ISR with
>>> MSIX+IGB_UIO
>>>
>>> I do agree with that for edge trigged interrupt mask may not require
>>> from kernel.
>>> But I am not sure why it is added in igb_uio kernel driver. May  be it
>>> is just legacy.
>>> Anyway this wont change schematics, when igb_uio kenrel fixed then the
>>> counter Part can be changed in rte_intr_ack(). Ie. it is transparent
>>> to drivers.
>>>
>>>>> I don't  have very strong opinion unmask vs ack. I prefer to have
>>>>> ack due the reasons stated above.
>>>>> If you really have strong opinion on using unmask, we will stick
>>>>> with that to make forward progress.
>>>>> Let us know.
>>>>>
>>>> I have no strong opinion either.
>>> OK. Lets stick with rte_intr_ack().
>>>
>>>> Thanks..
>>>> -Hyong

  reply	other threads:[~2019-07-17 12:05 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-15 16:50 [dpdk-dev] [RFC PATCH] vfio: avoid re-installing irq handler Jerin Jacob Kollanukkaran
2019-07-16  5:58 ` Hyong Youb Kim (hyonkim)
2019-07-16  6:47   ` Jerin Jacob Kollanukkaran
2019-07-16  7:49     ` Hyong Youb Kim (hyonkim)
2019-07-16  9:56       ` Jerin Jacob Kollanukkaran
2019-07-16  6:46 ` [dpdk-dev] [RFC PATCH] eal: add mask and unmask interrupt apis Nithin Dabilpuram
2019-07-16  7:01 ` [dpdk-dev] [RFC PATCH v2] " Nithin Dabilpuram
2019-07-16 16:44 ` [dpdk-dev] [RFC PATCH v3 1/3] vfio: revert change that does intr eventfd setup at probe Nithin Dabilpuram
2019-07-16 16:44   ` [dpdk-dev] [RFC PATCH v3 2/3] eal: add mask and unmask interrupt APIs Nithin Dabilpuram
2019-07-17  5:55     ` Hyong Youb Kim (hyonkim)
2019-07-17  6:14       ` Jerin Jacob Kollanukkaran
2019-07-17  7:09         ` Hyong Youb Kim (hyonkim)
2019-07-17  8:03           ` Jerin Jacob Kollanukkaran
2019-07-17  8:45             ` Hyong Youb Kim (hyonkim)
2019-07-17  9:20               ` Jerin Jacob Kollanukkaran
2019-07-17  9:51                 ` Hyong Youb Kim (hyonkim)
2019-07-17 10:43                   ` Jerin Jacob Kollanukkaran
2019-07-17 11:06                     ` Hyong Youb Kim (hyonkim)
2019-07-17 11:16                       ` Jerin Jacob Kollanukkaran
2019-07-17 12:04                         ` Nithin Kumar Dabilpuram [this message]
2019-07-16 16:44   ` [dpdk-dev] [RFC PATCH v3 3/3] drivers/net: use unmask API in interrupt handlers Nithin Dabilpuram
2019-07-17  6:01     ` Hyong Youb Kim (hyonkim)
2019-07-17  7:47       ` Nithin Kumar Dabilpuram
2019-07-16 20:06   ` [dpdk-dev] [RFC PATCH v3 1/3] vfio: revert change that does intr eventfd setup at probe Stephen Hemminger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=efea7cf7-a8ef-0fa7-d4c7-beda9e02c72a@marvell.com \
    --to=ndabilpuram@marvell.com \
    --cc=bruce.richardson@intel.com \
    --cc=david.marchand@redhat.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=hyonkim@cisco.com \
    --cc=jerinj@marvell.com \
    --cc=johndale@cisco.com \
    --cc=shshaikh@marvell.com \
    --cc=thomas@monjalon.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).